Municipal Administration And Urban Development Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Municipal Administration And Urban Development Department Tender
Civil And Construction
Eprocure
Opening Date24 Sep 2018
Closing Date26 Nov 2018
Tender AmountRefer Documents
Costs
EMD
₹ 1,57,50,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Andhra Pradesh Urban Water Supply And Septage Management Improvement Project - Aiib Funding
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_MAUD_387129_1Tender No
05/DB/AEE/1336/AIIB/WSIS/2018Tender Authority
Municipal Administration And Urban Development Department ViewPurchaser Address
-Website
http://http://www.appublichealth.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work including all labor charges and as per Technical Specification
1159
-
-
Cutting open Water Bound Macadam Road surface including stacking of excavated materials for pipe line trench work including all labor charges and as per Technical Specification
366
-
-
Earthwork excavation for Pipe Line trench as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Manual Means including all labour charges & incidental charges and as per the technical specification
11900
-
-
Earthwork excavation for Pipe Line trench as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Mechanical Means including all labour charges, machinery charges & incidental charges
19310
-
-
Earthwork excavation for Pipe Line trench in ordinary rock and blasting not required as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Manual Means including all labour charges & incidental charges
5020
-
-
Earthwork excavation for Pipe Line trench in ordinary rock and blasting not required as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Mechanical Means including all labour charges, machinary & incidental charges
4040
-
-
Excavation in hard rock (blasting prohibited) with Chiseller (Hammer Man) rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification including all labour charges, machinary & incidental charges
7530
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification
420
-
-
Supply and Delivery of HDPE PE-100 6 KSC Pipes conforming to IS 4984 - 1995 and amended including cost and transportation to site of work and stacking as per standards all taxes and duties but excluding GST and as per the Technical Specification
-
-
-
110 OD HDPE Pipes
10146
-
-
160 OD HDPE Pipes
16352
-
-
200 OD HDPE Pipes
11361
-
-
250 OD HDPE Pipes
6430
-
-
315 OD HDPE Pipes
1820
-
-
350 OD HDPE Pipes
55
-
-
Supply and delivery of centrifugally cast (spun) Ductile Iron K-7 pressure pipes for water with socket spigot ends conforming to IS: 8329/2000 and amended suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation to site of work labour charges for loading & Unloading and stacking as per standards and all incidental charges and also taxes & duties but excluding GST and as per Technical Specification
-
-
-
100mm dia DI K - 7
3869
-
-
150mm dia DI K - 7
2660
-
-
200 mm dia DI K - 7
2000
-
-
250 mm dia DI K - 7
387
-
-
300 mm dia DI K - 7
291
-
-
350 mm dia DI K - 7
683
-
-
Lowering D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries and incidental charges etc., complete and as per Technical Specification
-
-
-
110 mm Dia
3869
-
-
150 mm Dia
2660
-
-
200 mm dia
2000
-
-
250 mm dia
387
-
-
300mm dia
291
-
-
350mm dia
683
-
-
Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete and as per Technical Specification
-
-
-
110 mm Dia
1064
-
-
150 mm Dia
732
-
-
200 mm dia
550
-
-
250 mm dia
106
-
-
300mm dia
80
-
-
350mm dia
188
-
-
Supply and Delivery of HDPE fittings conforming to IS 4984 - 1995 including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification.
-
-
-
Pipe ends - long neck
-
-
-
110mm dia.
48
-
-
110 mm dia for Air TEEs
28
-
-
160mm dia.
64
-
-
160 mm dia for Air TEEs
18
-
-
200mm dia.
28
-
-
200 mm dia for Air TEEs
16
-
-
250mm dia.
22
-
-
250 mm dia for Air TEEs
12
-
-
315mm OD
10
-
-
315 mm dia for Air TEEs
2
-
-
355mm OD
10
-
-
355 mm dia for Air TEEs
4
-
-
110mm dia.
48
-
-
110 mm dia for Air TEEs
28
-
-
160mm dia.
64
-
-
160 mm dia for Air TEEs
18
-
-
200mm dia.
28
-
-
200 mm dia for Air TEEs
16
-
-
250mm dia.
22
-
-
250 mm dia for Air TEEs
12
-
-
315mm OD
10
-
-
315 mm dia for Air TEEs
2
-
-
355mm OD
10
-
-
355 mm dia for Air TEEs
4
-
-
End Caps
-
-
-
110mm dia.
11
-
-
160mm dia.
15
-
-
200mm dia.
17
-
-
250mm dia.
6
-
-
315mm OD
2
-
-
355mm OD
1
-
-
Reducers
-
-
-
110X125 mm dia
109
-
-
125x140 mm dia
109
-
-
140x160 mm dia
109
-
-
160x180 mm dia
76
-
-
180x200 mm dia
76
-
-
200x225 mm dia
27
-
-
225x250 mm dia
27
-
-
250x280 mm dia
1
-
-
280x315 mm dia
1
-
-
315x355 mm dia
1
-
-
TEES
-
-
-
110mm dia.
42
-
-
160mm dia.
67
-
-
200mm dia.
47
-
-
250mm dia.
30
-
-
315mm OD
11
-
-
355mm OD
4
-
-
Bends
-
-
-
110mm dia.
22
-
-
160mm dia.
36
-
-
200mm dia.
26
-
-
250mm dia.
16
-
-
315mm OD
6
-
-
355mm OD
3
-
-
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time true to the alignment and gradient and testing the pipeline to the required testing pressure including all labour charges & incidental charges etc., complete and as per the Technical Specification.
-
-
-
110mm dia.
10146
-
-
160mm dia.
16352
-
-
200mm dia.
11361
-
-
250mm dia.
6817
-
-
315mm OD
2111
-
-
355mm OD
738
-
-
Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings conforming to IS: 9523/2000 Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/IS 9523/2000) including Transportation, Taxes and Duties but excluding GST and as per Technical Specification
14603.4
-
-
Supply and delivery of PN 1.6 D.I D/F "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) confirming to IS 14846 latest amendment and Material of Construction (as per latest codes) as per Technical Specification of the Tender Document including cost and conveyance and stacking as per standards and as directed by Engineer-in-charge
-
-
-
100 mm dia
47
-
-
150mm dia
33
-
-
200mm dia
15
-
-
250mm dia
8
-
-
300mm dia
4
-
-
350mm dia
3
-
-
Supply and Delivery of PN 1.6 D.I D/F Tamper Proof DI Flanged Single Chamber Air Release Valves confirming to IS 14845 latest amendment and Material of Construction (as per latest code) as per Technical Specification of the Tender Document including cost and conveyance and stacking as per standards and as directed by Engineer-in-charge
-
-
-
80 mm dia
46
-
-
Lowering, keeping in position and fixing DI sluice valves (with cap / with hand wheel & reflex valves) including all labor charges and incidental charges and as per Technical Specification
-
-
-
100 mm dia
47
-
-
150mm dia
33
-
-
200mm dia
15
-
-
250mm dia
8
-
-
300mm dia
4
-
-
350mm dia
3
-
-
Lowering, keeping in position and fixing Kinetic air valves including all labor charges and incidental charges and as per Technical Specification
-
-
-
80 mm dia
46
-
-
Construction of RR Masonry valve chamber as per type design with Earth work, 0.15 Mts sand filling, 0.15 M CC (1:4:8) bed, 0.45 Mts R.R Masonry in CM (1:6) side walls, 0.10 Mt VRCC M20 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification for Sluice and Scour valves
-
-
-
100 mm & 150 mm dia valves
80
-
-
200mm & 250 mm ida valves
23
-
-
300mm & 350 mm dia valves
7
-
-
Construction of RR Masonry valve chamber as per type design with Earth work, 0.15 Mts sand filling, 0.15 M CC (1:4:8) bed, 0.45 Mts R.R Masonry in CM (1:6) side walls, 0.10 Mt VRCC M20 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification for Air Valves
-
-
-
80 mm dia on 110 mm & 160 mm dia pipes
29
-
-
80mm dia 200 mm pipe
8
-
-
80mm dia 315 mm & 355 mm dia pipes
3
-
-
Lowering D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries etc., complete and as per Technical Specification
-
-
-
100 mm
241.7
-
-
150 mm
142.4
-
-
200 mm
38
-
-
250 mm
22
-
-
300 mm
1.2
-
-
350 mm
10.4
-
-
Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete and as per Technical Specification
-
-
-
80 mm dia
46
-
-
100 mm dia
426
-
-
150 mm dia
224
-
-
200 mm dia
44
-
-
250 mm dia
38
-
-
300 mm dia
10
-
-
350 mm dia
10
-
-
Supply and filling with Crusher Stone Dust complying with standard specifications including cost and conveyance of Crusher Stone Dust to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work
780
-
-
Construction of un-reinforced, plain cement concrete pavement, thickness as per M30 (Grade) design, over a prepared sub base, with 43 grade cement, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 21 - days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification.
1521
-
-
Supply and delivery of Rubber packing including cost of material, Loading, Incidental Handling With Companys Standard Packing, Transportation, Unloading & Stacking including also taxes & duties but excluding GST and as per Technical Specification
2200
-
-
Supply and fixing of Bolts and nuts including cost of material, Loading, Transportation, Unloading & Stacking including also taxes & duties but excluding GST and as per Technical Specification
3600
-
-
CAP Bill No: 1.2 Providing 15mm dia New House service connections and transfer of Existing house Service connections
-
-
-
Providing House service connections in to the households compound from HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.
b) 1 No. of regulating brass ferrule as per IS 2692
c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.
f) CP bibcock
g) Geotagging of the HSC
h) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever required
j) 40 mm dia UPVC pipe for drain crossing
and as per Technical Specification
-
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE (Minimum 4.0 Mts MDPE pipe)
3023
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN EARTHEN ROADS (Minimum 7.0 Mts MDPE pipe)
907
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN CC &BT ROADS (Minimum 7.0 Mts MDPE pipe) (Augur boring with out damaging CC & BT Roads)
2116
-
-
CAP Bill No: 1.3 15mm size AMR Ultrasonic Meters
-
-
-
Provide installing and giving Satisfactory field testing of battery Operated "B" Class of 15mm size AMR Ultrasonic Meters having no moving part in Contact with water with magnetically sealed coupled and Hermitically sealed register ,with full brass body confirming to ISO 4064 along with manufacturing test certificate with battery life of min.10 years with GSM /RF Technology for communication to server with PC Software including all materials required for fixing ,labour and giving satisfactory leak proof test etc Complete,General Specifications:-1) Meter should be battery operated with no moving parts,low prtesser ,loss,dry type as per FCRI /MID.2)Display:- 8 digit LCD,3)Encloser :-Protection class IP 68 4) Tempature :-Ambit 50deg .C 5) Pressure :-minimum life of 10 Years 7) Memory built -In and should have storage for at least 12 months with daily /monthly accumulated totailised data with time and date should be available .It should able to access memory of the meter through serial communications 8) End Connection:- Screwed up to 40mm BSP/Npt coupling 9) Installation:- Should be able to install in any orientation 10) Transducre :-Inbuilt as per detailed Technical Specifications . 11) The acceptance /routine test shall be either conducted by M/S.Fliud Control Research In stitute ,Palght,Kerala or any of the Laboratories apporved by the National Accerditation Board for Calibration Laboratories (NABL) or EEC pattern apporaval certificates with at least 5 years battery life, including dual channel data loggers ,fixing specials,installation at site etc.. including providing and fixing in position poly propylene water meter box to accommodate water meter all charges and excluding GST and as per Technical Specification
6046
-
-
CAP Bill No: 1.4 SCADA SYSTEM
-
-
-
Supply, deliver and installation of bulk flow meter and other instruments in distribution net work
-
-
-
Electromagnetic Flow Meters Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical Specification
-
-
-
Begarlapalli (ZONE-1, 500 KL, ELSR) 150mm
1
-
-
Gollahatti (ZONE-2, 500 KL, ELSR) 150mm
1
-
-
Maruthi Nagar (ZONE-3, 500 KL, ELSR) 350mm
1
-
-
Government Jr. College (ZONE-4, 700 KL, ELSR) 200mm
1
-
-
Boyagiri (ZONE-5, 500 KL, ELSR ) 250mm
1
-
-
Mallinyaka Palli (ZONE-6, 500 KL, ELSR) 150mm
1
-
-
New SC Colony (ZONE-7, 500 KL, ELSR) 300mm
1
-
-
Pressure Transmitter
-
-
-
Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical Specification
14
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format and as per Technical specification
14
-
-
Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer and as per Technical specification
-
-
-
200 mm dia
1
-
-
250mm dia
1
-
-
300mm dia
1
-
-
350mm dia
1
-
-
Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations where ever necessary. This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical specification
3
-
-
Chlorine Analyzer
-
-
-
Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years and as per Technical specification
1
-
-
Turbidity Analyzer
-
-
-
Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years and as per Technical specification
1
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format and as per Technical specification
1
-
-
Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations suitable for fixing on above Valve Chambers as per approved Departmental designs including cost, conveyance and painting on red Oxide Primer etc complete for finished item of work and as per Technical specification.
1
-
-
Pressure Reducing Valves
-
-
-
Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior and as per Technical specification
-
-
-
Begarlapalli (ZONE-1, 500 KL, ELSR) 100mm
4
-
-
Gollahatti (ZONE-2, 500 KL, ELSR) 100mm
4
-
-
Maruthi Nagar (ZONE-3, 500 KL, ELSR)
-
-
-
100mm dia
3
-
-
150mm dia
2
-
-
200mm dia
1
-
-
Government Jr. College (ZONE-4, 700 KL, ELSR)
-
-
-
100mm dia
3
-
-
150mm dia
2
-
-
Boyagiri (ZONE-5, 500 KL, ELSR )
-
-
-
100mm dia
3
-
-
150mm dia
2
-
-
Mallinyaka Palli (ZONE-6, 500 KL, ELSR)
-
-
-
100mm dia
3
-
-
150mm dia
2
-
-
New SC Colony (ZONE-7, 500 KL, ELSR)
-
-
-
100mm dia
3
-
-
150mm dia
2
-
-
Handheld Devices
-
-
-
Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years and as per Technical specification
4
-
-
Control Centre
-
-
-
Meter Intergations with server and as per Technical specification
1
-
-
Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers and as per Technical specification
1
-
-
Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years and as per Technical specification
1
-
-
Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer and as per Technical specification
1
-
-
Printer - 3 in one on color printer with refillable ink bank and as per Technical specification
1
-
-
Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical specification
1
-
-
CAP BILL NO. 1.5 Providing for Implementation of Environmental Management Plan in the estimate for Madakasira Nagara Panchaayth.
-
-
-
I. Monitoring Costs : Construction Phase (Two years)
-
-
-
Air Quality Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period
16
-
-
Noise level Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period
16
-
-
Water Quality Monitoring surface / ground (6 Monitoring station) once in a month for three seasons during the construction period
24
-
-
II. Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5) including tree guard and as per Technical Specification
45
-
-
III. Sprinkling of water with 5000 Litres capacity tankers once in a day for 250 days (excluding rainy days)
250
-
-
CAP BILL NO. 1.6 Hiring for 1 No Vehicles for 24 Months during execution period.
-
-
-
Hiring for 1 Nos. Vehicles for Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
24
-
-
2.GOOTY MUNICIPALITY (CAPEX)
-
-
-
CAP Bill no : 2.1 Providing comprehensive Distribution net work in the town
-
-
-
Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam including all labor charges and as per Technical Specification
1471.5
-
-
Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work including all labor charges and as per Technical Specification
5277.3
-
-
Earthwork excavation for Pipe Line trench as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Manual Means including all labour charges and incidental charges etc., complete
53286
-
-
Earthwork excavation for Pipe Line trench as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Mechanical Means including all labour charges, machinery and incidental charges etc., complete
19034
-
-
Excavation in hard rock (blasting prohibited) with Chiseller (Hammer Man) rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification including all labour charges, machinary and incidental charges etc., complete
3809
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification
1362
-
-
Supply and Delivery of HDPE PE-100 6 KSC Pipes conforming to IS 4984 - 1995 amended including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification.
-
-
-
110 OD HDPE Pipes
65406
-
-
160 OD HDPE Pipes
12307
-
-
200 OD HDPE Pipes
4419
-
-
250 OD HDPE Pipes
3004
-
-
Supply and delivery of centrifugally cast (spun) Ductile Iron K-7 pressure pipes for water with socket spigot ends conforming to IS: 8329/2000 amended suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation to site of work labour charges for loading & Unloading and stacking as per standards and all incidental charges and also taxes & duties but excluding GST and as per Technical Specification
-
-
-
300mm dia DI K - 7
1949
-
-
350mm dia DI K - 7
866
-
-
Supply and delivery of Rubber Gaskets Suitable for DI S/S pipes as Per BIS 12820/89 amended With S.B.R. Quality Rubber Confirming to BIS: 5382/85 including cost of material, Loading, Incidental Handling With Companys Standard Packing, Transportation, Unloading & Stacking including also taxes & duties but excluding GST and as per Technical Specification
-
-
-
300mm dia DI K - 7
392
-
-
350mm dia DI K - 7
174
-
-
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time true to the alignment and gradient and testing the pipeline to the required testing pressure and as per the Technical Specification.
-
-
-
110 OD HDPE Pipes
65406
-
-
160 OD HDPE Pipes
12307
-
-
200 OD HDPE Pipes
4419
-
-
250 OD HDPE Pipes
3004
-
-
Supply and Delivery of HDPE fittings conforming to IS 4984 - 1995 including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification.
-
-
-
TEES
-
-
-
110 OD HDPE Pipes
657
-
-
160 OD HDPE Pipes
126
-
-
200 OD HDPE Pipes
48
-
-
250 OD HDPE Pipes
32
-
-
BENDS
-
-
-
110 OD HDPE Pipes
1311
-
-
160 OD HDPE Pipes
249
-
-
200 OD HDPE Pipes
92
-
-
250 OD HDPE Pipes
62
-
-
END CAPS
-
-
-
110 OD HDPE Pipes
221
-
-
160 OD HDPE Pipes
44
-
-
200 OD HDPE Pipes
18
-
-
250 OD HDPE Pipes
12
-
-
REDUCERS
-
-
-
110 OD to 160 OD HDPE Pipes
-
-
-
OD 110mm x 125mm
149
-
-
OD 125mm x 140mm
149
-
-
OD 140mm x 160mm
149
-
-
160 OD to 200 OD HDPE Pipes
-
-
-
OD 160mm x 180mm
30
-
-
OD 180mm x 200mm
30
-
-
160 OD to 250 OD HDPE Pipes
-
-
-
OD 200mm x 225mm
13
-
-
OD 225mm x 250mm
13
-
-
250 OD HDPE Pipes
-
-
-
OD 250mm x 280mm
12
-
-
OD 280mm x 315mm
12
-
-
Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings conforming to IS: 9523/2000 Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) including Transportation, Taxes and Duties but excluding GST and as per Technical Specification
746
-
-
Lowering D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries etc., complete and as per Technical Specification
-
-
-
300mm dia DI K - 7
1949
-
-
350mm dia DI K - 7
866
-
-
Jointing D.I. pipes and fittings with rubber gasket (push-on-joint) but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete and as per Technical Specification
-
-
-
300mm dia DI K - 7
413
-
-
350mm dia DI K - 7
183
-
-
Supply and delivery of PN 1.6 D.I D/F "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) confirming to IS 14846 latest amendment and Material of Construction (as per latest codes) as per Technical Specification of the Tender Document including cost and conveyance and stacking as per standards and as directed by Engineer-in-charge
-
-
-
100mm dia Sluice Valves
51
-
-
100mm dia Scour Valves
30
-
-
150mm dia Sluice Valves
15
-
-
150mm dia Scour Valves
9
-
-
200mm dia Sluice Valves
8
-
-
200mm dia Scour Valves
6
-
-
250mm dia Sluice Valves
6
-
-
250mm dia Scour Valves
5
-
-
300mm dia Sluice Valves
4
-
-
300mm dia Scour Valves
2
-
-
350mm dia Sluice Valves
2
-
-
Lowering, keeping in position and fixing DI sluice valves (with cap / with hand wheel & reflex valves) including all labor charges and incidental charges and as per Technical Specification
-
-
-
100mm dia Sluice Valves
51
-
-
100mm dia Scour Valves
30
-
-
150mm dia Sluice Valves
15
-
-
150mm dia Scour Valves
9
-
-
200mm dia Sluice Valves
8
-
-
200mm dia Scour Valves
6
-
-
250mm dia Sluice Valves
6
-
-
250mm dia Scour Valves
5
-
-
300mm dia Sluice Valves
4
-
-
300mm dia Scour Valves
2
-
-
350mm dia Sluice Valves
2
-
-
Supply, delivery of CI Specials as per IS code including cost and conveyance, labour charges for loading and unloading and stacking as per standards etc., complete and as per technical specifications
54730.2
-
-
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete and as per Technical Specification
-
-
-
100mm dia
102
-
-
150mm dia
30
-
-
200mm dia
16
-
-
250mm dia
12
-
-
300mm dia
20
-
-
350mm dia
10
-
-
Construction of RR Masonry valve chamber as per type design with Earth work, 0.15 Mts sand filling, 0.15 M CC (1:4:8) bed, 0.45 Mts R.R Masonry in CM (1:6) side walls, 0.10 Mt VRCC M20 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification
-
-
-
100mm dia Sluice Valves
51
-
-
100mm dia Scour Valves
30
-
-
150mm dia Sluice Valves
15
-
-
150mm dia Scour Valves
9
-
-
200mm dia Sluice Valves
8
-
-
200mm dia Scour Valves
6
-
-
250mm dia Sluice Valves
6
-
-
250mm dia Scour Valves
5
-
-
300mm dia Sluice Valves
4
-
-
300mm dia Scour Valves
2
-
-
350mm dia Sluice Valves
2
-
-
Road Restoration
-
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification
8140
-
-
Construction of un-reinforced, plain cement concrete pavement, thickness as per M30 (Grade) design, over a prepared sub base, with 43 grade cement, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 21 - days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification.
9225
-
-
Earth filling in foundation trenches with excavated borrowed earth including cost and conveyance all labour charges and as directed by Engineer-in-charge for hard rock portion
12307
-
-
Carting of Excavated Earth with a lead of 3.00 Kms including Loading and Unloading & Conveyance charges for machinery for transporting materials by tippers and trucks and all labor charges and incidental charges and as directed by Engineer-in-Charge
18879
-
-
CAP Bill No : 2.2 Providing safety protection during pipe line trench work with light based vertical standar safety cone and tying with safety radium tape including cost and coveyance and all labor charges etc., complete and as per Technical Specification
43978
-
-
CAP Bill No: 2.3 Providing 15mm dia New House service connections and transfer of Existing house Service connections
-
-
-
Providing House service connections in to household compound from HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.
b) 1 No. of regulating brass ferrule as per IS 2692
c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.
f) CP bibcock
g) Geotagging of the HSC
h) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever required
j) 40 mmUPVC pipe for drain crossing
and as per Technical Specification
-
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE (Minimum 4.0 Mts MDPE pipe)
6735
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN EARTHEN ROADS (Minimum 7.0 Mts MDPE pipe)
2021
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN CC &BT ROADS (Minimum 7.0 Mts MDPE pipe) (Augur boring with out damaging CC & BT Roads)
4715
-
-
CAP Bill No: 2.4 15mm size AMR Ultrasonic Meters
-
-
-
Provide installing and giving Satisfactory field testing of battery Operated "B" Class of 15mm size AMR Ultrasonic Meters having no moving part in Contact with water with magnetically sealed coupled and Hermitically sealed register ,with full brass body confirming to ISO 4064 along with manufacturing test certificate with battery life of min.10 years with GSM /RF Technology for communication to server with PC Software including all materials required for fixing ,labour and giving satisfactory leak proof test etc Complete,General Specifications:-1) Meter should be battery operated with no moving parts,low prtesser ,loss,dry type as per FCRI /MID.2)Display:- 8 digit LCD,3)Encloser :-Protection class IP 68 4) Tempature :-Ambit 50deg .C 5) Pressure :-minimum life of 10 Years 7) Memory built -In and should have storage for at least 12 months with daily /monthly accumulated totailised data with time and date should be available .It should able to access memory of the meter through serial communications 8) End Connection:- Screwed up to 40mm BSP/Npt coupling 9) Installation:- Should be able to install in any orientation 10) Transducre :-Inbuilt as per detailed Technical Specifications . 11) The acceptance /routine test shall be either conducted by M/S.Fliud Control Research In stitute ,Palght,Kerala or any of the Laboratories apporved by the National Accerditation Board for Calibration Laboratories (NABL) or EEC pattern apporaval certificates with at least 5 years battery life, including dual channel data loggers ,fixing specials,installation at site etc.. including providing and fixing in position poly propylene water meter box to accommodate water meter all charges and excluding GST and as per Technical Specification
13471
-
-
CAP Bill No: 2.5 SCADA SYSTEM
-
-
-
Supply, deliver and installation of bulk flow meter and other instruments in distribution net work
-
-
-
Electromagnetic Flow Meters Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical Specification
-
-
-
Jangala Veedi (Zone-1, 250 KL, ELSR)-300 mm
1
-
-
Saibaba Talkies (Zone-2, 150 KL, ELSR),-250 mm
1
-
-
P.R. Office (Zone-2, 200 KL, ELSR)-250 mm
1
-
-
Kota Area (Zone-4, 800 KL, ELSR)-350 mm
1
-
-
Edga Peta (Zone-3, 700 KL, ELSR)-300 mm
1
-
-
MDO Office (Zone-5, 250 KL, ELSR)-350 mm
1
-
-
SS Palli (Zone-5, 900 KL, ELSR)-200 mm
1
-
-
C.Palli MPL Office (Zone-6, 150 KL, ELSR)-250 mm
1
-
-
Tholla Shop (Zone-6, 120 KL, ELSR)-300 mm
1
-
-
SC Colony (Zone-6, 120 KL, ELSR)-250 mm
1
-
-
C.Palli BC Colony (Zone-6, 200 KL, ELSR)v-250 mm
1
-
-
C.Palli SC Colony (Zone-6, 90 KL, ELSR)-200 mm
1
-
-
Pressure Transmitter Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical Specification
24
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format and as per Technical specification
24
-
-
Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer and as per Technical specification
-
-
-
200 mm dia
2
-
-
250 mm dia
5
-
-
300 mm dia
3
-
-
350 mm dia
2
-
-
Chlorine Analyzer
-
-
-
Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years and as per Technical specification
1
-
-
Turbidity Analyzer
-
-
-
Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years and as per Technical specification
1
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format and as per Technical specification
1
-
-
Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations suitable for fixing on above Valve Chambers as per approved Departmental designs including cost, conveyance and painting on red Oxide Primer etc complete for finished item of work and as per Technical specification.
1
-
-
Pressure Reducing Valves
-
-
-
Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior and as per Technical specification
-
-
-
Jangala Veedi (Zone-1, 250 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Saibaba Talkies (Zone-2, 150 KL, ELSR),
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
P.R. Office (Zone-2, 200 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150mm dia
2
-
-
200 mm dia
1
-
-
Kota Area (Zone-4, 800 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Edga Peta (Zone-3, 700 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
MDO Office (Zone-5, 250 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
SS Palli (Zone-5, 900 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
C.Palli MPL Office (Zone-6, 150 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Tholla Shop (Zone-6, 120 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
SC Colony (Zone-6, 120 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
C.Palli BC Colony (Zone-6, 200 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
C.Palli SC Colony (Zone-6, 90 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Handheld Devices
-
-
-
Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years and as per Technical specification
14
-
-
Control Centre
-
-
-
Meter Intergations with server and as per Technical specification
1
-
-
Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers.
1
-
-
Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years and as per Technical specification
1
-
-
Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer and as per Technical specification
1
-
-
Printer - 3 in one on color printer with refillable ink bank and as per Technical specification
1
-
-
Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical specification
1
-
-
CAP Bill No : 2.6 Providing for Implementation of Environmental Management Plan in the estimate for Gooty Municipality.
-
-
-
I. Monitoring Costs : Construction Phase (Two years) and as per Technical specification
-
-
-
Air Quality Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period at distribution network and as per Technical specification
6
-
-
Noise level Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period distribution network and as per Technical specification
6
-
-
Water Quality Monitoring surface / ground (6 Monitoring station) once in a month for three seasons during the construction period distribution network and as per Technical specification
9
-
-
II. Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5) including tree guard and as per Technical specification
25
-
-
III. Sprinkling of water with 5000 Litres capacity tankers once in a day for 100 days (excluding rainy days) and as per Technical specification
100
-
-
CAP Bill No: 2.7 Hiring for 1 Nos. Vehicle for 24 Months during execution period.
-
-
-
Hiring for 1 Nos. Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
24
-
-
3.KALYANDURGAM MUNICIPALITY (CAPEX)
-
-
-
CAP Bill No : 3.1 Providing Comprehensive Distribution system for Zone - I to VI including Road Restoration in the town
-
-
-
Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work including all labor charges etc., complete and as per Technical Specification
4092.8
-
-
Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam including stacking of excavated materials for pipe line trench work including all labor charges etc., complete and as per Technical Specification
5523.3
-
-
Providing safery protection during pipe line trench work with light based vertical safety cone and tying with safery radium tape roll including cost and conveyance and labour charges etc., complete as per the Technical Specifications
37636
-
-
Earthwork excavation by Mechanical means in all types of soils for pipe lines as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by the departmental Officer including all Incidental and operational Charges etc Complete and as pe Technical Specification
14207.3
-
-
Earthwork excavation in Ordinary Rock blasting not required for pipe lines as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by the departmental Officer including all Incidental and operational Charges etc Complete and as per Technical Specification
3551.8
-
-
Earthwork excavation by Manually in all types of soils for pipe lines as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by the departmental Officer including all Incidental and operational Charges etc Complete and as per Technical Specification
49725.6
-
-
Earthwork excavation in Hard Rock (blasting Prohibited) for pipe lines as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material and as directed by the departmental Officer including all Incidental and operational Charges etc Complete and as per Technical Specification
3551.8
-
-
Supply and Delivery of HDPE PE-100 6 KSC Pipes conforming to IS 4984 - 1995 amended including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification.
-
-
-
250mm dia HDPE Pipe
1693
-
-
200mm dia HDPE Pipe
4146
-
-
160mm dia HDPE Pipe
18538
-
-
110mm dia HDPE Pipe
48922
-
-
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time true to the alignment and gradient and testing the pipeline to the required testing pressure and as per the Technical Specification.
-
-
-
250mm dia HDPE Pipe
1693
-
-
200mm dia HDPE Pipe
4146
-
-
160mm dia HDPE Pipe
18538
-
-
110mm dia HDPE Pipe
48922
-
-
Supply and Delivery of HDPE fittings conforming to IS 4984 - 1995 as amended including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification.
-
-
-
TEES
-
-
-
110 OD HDPE Pipes
491
-
-
160 OD HDPE Pipes
190
-
-
200 OD HDPE Pipes
45
-
-
250 OD HDPE Pipes
18
-
-
BENDS
-
-
-
110 OD HDPE Pipes
982
-
-
160 OD HDPE Pipes
360
-
-
200 OD HDPE Pipes
90
-
-
250 OD HDPE Pipes
36
-
-
END CAPS
-
-
-
110 OD HDPE Pipes
164
-
-
160 OD HDPE Pipes
60
-
-
200 OD HDPE Pipes
15
-
-
250 OD HDPE Pipes
6
-
-
REDUCERS
-
-
-
110 OD to 160 OD HDPE Pipes
-
-
-
OD 110mm x 125mm
126
-
-
OD 125mm x 140mm
126
-
-
OD 140mm x 160mm
126
-
-
160 OD to 200 OD HDPE Pipes
-
-
-
OD 160mm x 180mm
30
-
-
OD 180mm x 200mm
30
-
-
160 OD to 250 OD HDPE Pipes
-
-
-
OD 200mm x 225mm
12
-
-
OD 225mm x 250mm
12
-
-
250 OD HDPE Pipes
-
-
-
OD 250mm x 280mm
12
-
-
OD 280mm x 315mm
12
-
-
Supply and delivery of centrifugally cast (spun) Ductile Iron K-7 pressure pipes for water with socket spigot ends conforming to IS: 8329/2000 as amended suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation to site of work labour charges for loading & Unloading and stacking as per standards and all incidental charges and also taxes & duties but excluding GST and as per Technical Specification
-
-
-
350 mm DI K7 Pipe
609
-
-
300 mm DI K7 Pipe
1364
-
-
Jointing D.I. pipes and fittings with rubber gasket (push-on-joint) but including rubber gaskets and all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete and as per Technical Specification
-
-
-
350 mm DI K7 Pipe
152
-
-
300 mm DI K7 Pipe
343
-
-
Lowering D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries etc., complete and as per Technical Specification
-
-
-
350 mm DI K7 Pipe
609
-
-
300 mm DI K7 Pipe
1364
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification Quantity equal to rock quantity
7103.7
-
-
Supply and delivery of PN 1.6 D.I D/F "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) confirming to IS 14846 latest amendment and Material of Construction (as per latest codes) as per Technical Specification of the Tender Document including cost and conveyance and stacking as per standards and as directed by Engineer-in-charge including all duties except GST.
-
-
-
350mm dia valve
1
-
-
300mm dia sluice valve
2
-
-
250mm dia valve
7
-
-
200mm dia valve
19
-
-
150mm dia sluice valve
12
-
-
100mm dia sluice valve
97
-
-
100mm dia sluice valve for scour
60
-
-
Lowering, keeping in position and fixing DI sluice valves (with cap / with hand wheel & reflex valves) including all labor charges and incidental charges and as per Technical Specification
-
-
-
350mm dia valve
1
-
-
300mm dia sluice valve
2
-
-
250mm dia valve
7
-
-
200mm dia valve
19
-
-
150mm dia sluice valve
12
-
-
100mm dia sluice valve
97
-
-
100mm dia sluice valve for scour
60
-
-
Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings conforming to IS: 9523/2000 Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) including Transportation, Taxes and Duties but excluding GST and as per Technical Specification
8160
-
-
Supply and delivery of Centrifugally cast (spun) Ductile Iron pressure pipes with flanged (welded) ends for water conforming to I.S.: 8329/2000 for classification k9 with Cement mortar lining inside the pipes with outside Zinc coating including Transportation, Taxes and Duties but excluding GST and as per Technical Specification
-
-
-
250 mm DF pipes 1.00 m long
16
-
-
200 mm DF pipes 1.00 m long
48
-
-
150 mm DF pipes 2.00 m long
42
-
-
Jointing the D.I. Pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a water lead upto 500 m and testing to required pressure etc., comp as per BIS No.3114/85 and as per Technical Specification
-
-
-
350mm dia valve
4
-
-
300mm dia sluice valve
24
-
-
250mm dia sluice valve
28
-
-
200mm dia sluice valve
72
-
-
150mm dia sluice valve
84
-
-
Construction of RR Masonry valve chamber as per type design with Earth work, 0.15 Mts sand filling, 0.15 M CC (1:4:8) bed, 0.45 Mts R.R Masonry in CM (1:6) side walls, 0.10 Mt VRCC M20 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification
-
-
-
350mm dia valve
1
-
-
300mm dia sluice valve
2
-
-
250mm dia valve
7
-
-
200mm dia valve
19
-
-
150mm dia sluice valve
12
-
-
100mm dia sluice valve
97
-
-
100mm dia sluice valve for scour
60
-
-
Carting of Excavated Earth with a lead of 1.00 Kms including Loading and Unloading & Conveyance charges for machinery for transporting materials by tippers and trucks and all labor charges and incidental charges and as directed by Engineer-in-Charge
17244.2
-
-
Supply and delivery of Cast Iron Pipes and Fittings Confirming I.S. No. 7181/1986, 5531/1988, 3950/1979 at Site workincluding Transportation, stacking charges,Taxes and Duties but excluding GST and as per Technical Specification etc. for Drain Crossings
24445.8
-
-
Supply and filling with Crusher Stone Dust complying with standard specifications including cost and conveyance of Crusher Stone Dust to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work - Road Formation
10343.5
-
-
Construction of un-reinforced, plain cement concrete pavement, thickness as per M30 (Grade) design, over a prepared sub base, with 43 grade cement, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 21 - days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification.for Road Formation
12067.4
-
-
CAP Bill No: 3.2 Providing 15mm dia New House service connections and trasferring existing House Service connections
-
-
-
Providing House service connections in to households compound from HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.
b) 1 No. of regulating brass ferrule as per IS 2692
c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.
f) CP bibcock
g) Geotagging of the HSC
h) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever required
j) 40 mm UPVC pipe for drain crossing
and as per Technical Specification
-
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE (Minimum 4.0 Mts MDPE pipe)
5734
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN EARTHEN ROADS (Minimum 7.0 Mts MDPE pipe)
3612
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN CC &BT ROADS (Minimum 7.0 Mts MDPE pipe) (Augur boring with out damaging CC & BT Roads)
2121
-
-
CAP Bill No: 3.3 15mm size AMR Ultrasonic Meters
-
-
-
Provide installing and giving Satisfactory field testing of battery Operated "B" Class of 15mm size AMR Ultrasonic Meters having no moving part in Contact with water with magnetically sealed coupled and Hermitically sealed register ,with full brass body confirming to ISO 4064 along with manufacturing test certificate with battery life of min.10 years with GSM /RF Technology for communication to server with PC Software including all materials required for fixing ,labour and giving satisfactory leak proof test etc Complete,General Specifications:-1) Meter should be battery operated with no moving parts,low prtesser ,loss,dry type as per FCRI /MID.2)Display:- 8 digit LCD,3)Encloser :-Protection class IP 68 4) Tempature :-Ambit 50deg .C 5) Pressure :-minimum life of 10 Years 7) Memory built -In and should have storage for at least 12 months with daily /monthly accumulated totailised data with time and date should be available .It should able to access memory of the meter through serial communications 8) End Connection:- Screwed up to 40mm BSP/Npt coupling 9) Installation:- Should be able to install in any orientation 10) Transducre :-Inbuilt as per detailed Technical Specifications . 11) The acceptance /routine test shall be either conducted by M/S.Fliud Control Research In stitute ,Palght,Kerala or any of the Laboratories apporved by the National Accerditation Board for Calibration Laboratories (NABL) or EEC pattern apporaval certificates with at least 5 years battery life, including dual channel data loggers ,fixing specials,installation at site etc.. including providing and fixing in position poly propylene water meter box to accommodate water meter all charges and excluding GST and as per Technical Specification
11467
-
-
CAP Bill No: 3.4 SCADA SYSTEM
-
-
-
Supply, deliver and installation of bulk flow meter and other instruments in distribution network
-
-
-
Electromagnetic Flow Meters Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical Specification
-
-
-
Zone-1 (NTR Colony) DMA INLET 350mm Dia
1
-
-
Zone-2 (Gravy Yard) DMA INLET 350mm Dia
1
-
-
Zone-3 (Dhobighat) DMA INLET 350mm Dia
1
-
-
Zone-4 (Marampalli) DMA INLET 350mm Dia
1
-
-
Zone-5 (Mudigallu) DMA INLET 250mm Dia
1
-
-
Zone-6 (Ontimidde) DMA INLET 250mm Dia
1
-
-
Pressure Transmitter-Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical Specification
12
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format as per Technical Specification
12
-
-
Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer as per Technical Specification
-
-
-
250 mm dia
2
-
-
350 mm dia
4
-
-
Chlorine Analyzer-Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years and as per Technical Specification
1
-
-
Turbidity Analyzer-Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years and as per Technical Specification
1
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format and as per Technical Specification
1
-
-
Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations suitable for fixing on above Valve Chambers as per approved departmental designs including cost, conveyance and painting on red oxide primer etc., complete for finished item of work and as per Technical Specification
1
-
-
Pressure Reducing Valves-Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior and as per Technical Specification
-
-
-
Zone-1 (NTR Colony) DMA
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Zone-2 (Grave Yard) DMA
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Zone-3 (Dhobighat) DMA
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Zone-4 (Marampalli) DMA
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Zone-5 (Mudigallu) DMA
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Zone-6 (Ontimidde) DMA
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mmdia
1
-
-
Handheld Devices Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years and as per Technical Specification
8
-
-
Control Centre
-
-
-
Meter Intergations with server and as per Technical Specification
1
-
-
Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers.
1
-
-
Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years
1
-
-
Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer and as per Technical Specification
1
-
-
Printer - 3 in one on color printer with refillable ink bank and as per Technical Specification
1
-
-
Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
1
-
-
CAP Bill No : 3.5 Providing for Implementation of Environmental Management Plan in the estimate for Kalyanadurgam Municipality.
-
-
-
I. Monitoring Costs : Construction Phase (Two years) and as per Technical specification
-
-
-
Air Quality Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period at distribution network and as per Technical specification
15
-
-
Noise level Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period distribution network and as per Technical specification
15
-
-
Water Quality Monitoring surface / ground (6 Monitoring station) once in a month for three seasons during the construction period distribution network and as per Technical specification
21
-
-
II. Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5) including tree guard and as per Technical specification
50
-
-
III. Sprinkling of water with 5000 Litres capacity tankers once in a day for 100 days (excluding rainy days) and as per Technical specification
300
-
-
CAP Bill No: 3.6 Hiring for 1 Nos. Vehicle for 24 Months during execution period.
-
-
-
Hiring for 1 Nos. Vehicles for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
24
-
-
4.PAMIDI MUNICIPALITY (CAPEX)
-
-
-
CAP Bill No : 4.1 Providing comprehensive Distribution net work in the town
-
-
-
Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam including all labor charges and as per Technical Specification
1704
-
-
Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work including all labor charges and as per Technical Specification
2722
-
-
Earthwork excavation for Pipe Line trench as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Manual Means including all labour charges and incidental charges etc., complete
28705
-
-
Earthwork excavation for Pipe Line trench as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Mechanical Means including all labour charges, machinary and incidental charges etc., complete
8202
-
-
Excavation in hard rock (blasting prohibited) with Chiseller (Hammer Man) rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification including all labour charges and incidental charges etc., complete
4102
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification
714
-
-
Supply and Delivery of HDPE PE-100 6 KSC Pipes conforming to IS 4984 - 1995 amended including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification.
-
-
-
110 OD HDPE Pipes
26907
-
-
160 OD HDPE Pipes
8579
-
-
200 OD HDPE Pipes
2439
-
-
250 OD HDPE Pipes
3299
-
-
Supply and delivery of centrifugally cast (spun) Ductile Iron K-7 pressure pipes for water with socket spigot ends conforming to IS: 8329/2000 amended suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation to site of work labour charges for loading & Unloading and stacking as per standards and all incidental charges and also taxes & duties but excluding GST and as per Technical Specification
-
-
-
300mm dia DI K - 7
2761
-
-
350mm dia DI K - 7
529
-
-
400mm dia DI K - 7
823
-
-
Supply and delivery of Rubber Gaskets Suitable for DI S/S pipes as Per BIS 12820/89 amended With S.B.R. Quality Rubber Confirming to BIS: 5382/85 including cost of material, Loading, Incidental Handling With Companys Standard Packing, Transportation, Unloading & Stacking including also taxes & duties but excluding GST and as per Technical Specification
-
-
-
300mm dia DI K - 7
553
-
-
350mm dia DI K - 7
106
-
-
400mm dia DI K - 7
165
-
-
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time true to the alignment and gradient and testing the pipeline to the required testing pressure and as per the Technical Specification.
-
-
-
110 OD HDPE Pipes
26907
-
-
160 OD HDPE Pipes
8579
-
-
200 OD HDPE Pipes
2439
-
-
250 OD HDPE Pipes
3299
-
-
Supply and Delivery of HDPE fittings conforming to IS 4984 - 1995 amended including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification.
-
-
-
TEES
-
-
-
110 OD HDPE Pipes
271
-
-
160 OD HDPE Pipes
87
-
-
200 OD HDPE Pipes
26
-
-
250 OD HDPE Pipes
34
-
-
BENDS
-
-
-
110 OD HDPE Pipes
540
-
-
160 OD HDPE Pipes
174
-
-
200 OD HDPE Pipes
50
-
-
250 OD HDPE Pipes
67
-
-
END CAPS
-
-
-
110 OD HDPE Pipes
92
-
-
160 OD HDPE Pipes
31
-
-
200 OD HDPE Pipes
10
-
-
250 OD HDPE Pipes
12
-
-
REDUCERS
-
-
-
110 OD to 160 OD HDPE Pipes
-
-
-
OD 110mm x 125mm
62
-
-
OD 125mm x 140mm
62
-
-
OD 140mm x 160mm
62
-
-
160 OD to 200 OD HDPE Pipes
-
-
-
OD 160mm x 180mm
22
-
-
OD 180mm x 200mm
22
-
-
160 OD to 250 OD HDPE Pipes
-
-
-
OD 200mm x 225mm
7
-
-
OD 225mm x 250mm
7
-
-
250 OD HDPE Pipes
-
-
-
OD 250mm x 280mm
12
-
-
OD 280mm x 315mm
12
-
-
Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings conforming to IS: 9523/2000 Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) including Transportation, Taxes and Duties but excluding GST and as per Technical Specification
6715
-
-
Lowering D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries etc., complete and as per Technical Specification
-
-
-
300mm dia DI K - 7
2761
-
-
350mm dia DI K - 7
529
-
-
400mm dia DI K - 7
823
-
-
Jointing D.I. pipes and fittings with rubber gasket (push-on-joint) but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete and as per Technical Specification
-
-
-
300mm dia DI K - 7
581
-
-
350mm dia DI K - 7
111
-
-
400mm dia DI K - 7
173
-
-
Supply and delivery of PN 1.6 D.I D/F "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) confirming to IS 14846 latest amendment and Material of Construction (as per latest codes) as per Technical Specification of the Tender Document including cost and conveyance and stacking as per standards and as directed by Engineer-in-charge
-
-
-
100mm dia Sluice Valves
23
-
-
100mm dia Scour Valves
12
-
-
150mm dia Sluice Valves
9
-
-
150mm dia Scour Valves
6
-
-
200mm dia Sluice Valves
4
-
-
200mm dia Scour Valves
3
-
-
250mm dia Sluice Valves
3
-
-
300mm dia Sluice Valves
2
-
-
350mm dia Sluice Valves
1
-
-
400mm dia Sluice Valves
1
-
-
Lowering, keeping in position and fixing DI sluice valves (with cap / with hand wheel & reflex valves) including all labor charges and incidental charges and as per Technical Specification
-
-
-
100mm dia Sluice Valves
23
-
-
100mm dia Scour Valves
12
-
-
150mm dia Sluice Valves
9
-
-
150mm dia Scour Valves
6
-
-
200mm dia Sluice Valves
4
-
-
200mm dia Scour Valves
3
-
-
250mm dia Sluice Valves
3
-
-
300mm dia Sluice Valves
2
-
-
350mm dia Sluice Valves
1
-
-
400mm dia Sluice Valves
1
-
-
Supply, delivery of CI Specials as per IS code including cost and conveyance, labour charges for loading and unloading and stacking as per standards etc., complete and as per technical specifications
55239
-
-
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete and as per Technical Specification
-
-
-
100mm dia
46
-
-
150mm dia
18
-
-
200mm dia
8
-
-
250mm dia
6
-
-
300mm dia
72
-
-
350mm dia
78
-
-
Construction of RR Masonry valve chamber as per type design with Earth work, 0.15 Mts sand filling, 0.15 M CC (1:4:8) bed, 0.45 Mts R.R Masonry in CM (1:6) side walls, 0.10 Mt VRCC M20 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification
-
-
-
100mm dia Sluice Valves
23
-
-
100mm dia Scour Valves
12
-
-
150mm dia Sluice Valves
9
-
-
150mm dia Scour Valves
6
-
-
200mm dia Sluice Valves
4
-
-
200mm dia Scour Valves
3
-
-
250mm dia Sluice Valves
3
-
-
300mm dia Sluice Valves
2
-
-
350mm dia Sluice Valves
1
-
-
400mm dia Sluice Valves
1
-
-
Supply and filling with Crusher Stone Dust complying with standard specifications including cost and conveyance of Crusher Stone Dust to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work
2892
-
-
Construction of un-reinforced, plain cement concrete pavement, thickness as per M30 (Grade) design, over a prepared sub base, with 43 grade cement, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 21 - days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification
4915
-
-
Earth filling in foundation trenches with excavated borrowed earth including cost and conveyance all labour charges and as directed by Engineer-in-charge for hard rock portion
4102
-
-
Carting of Excavated Earth with a lead of 3.00 Kms including Loading and Unloading & Conveyance charges for machinery for transporting materials by tippers and trucks and all labor charges and incidental charges and as directed by Engineer-in-Charge
11051
-
-
Providing Safety Protection during pipe line trench work with light based vertical safety cone and tying with safety radium tape roll including cost and conveynce and lbor charges etc., complete as per the technical specification.
22670
-
-
CAP Bill No: 4.2 Providing 15mm dia New House service connections and transfer of Existing house Service connections.
-
-
-
Providing House service connections in to households compound wall from HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.
b) 1 No. of regulating brass ferrule as per IS 2692
c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.
f) CP bibcock
g) Geotagging of the HSC
h) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever required
j) 40 mm UPVC pipe for drain crossing
and as per Technical Specification
-
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE (Minimum 4.0 Mts MDPE pipe)
4480
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN EARTHEN ROADS (Minimum 7.0 Mts MDPE pipe)
1792
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN CC &BT ROADS (Minimum 7.0 Mts MDPE pipe) (Augur boring with out damaging CC & BT Roads)
2688
-
-
CAP Bill No: 4.3 15 mm Size AMR Ultrasonic Meters
-
-
-
Provide installing and giving Satisfactory field testing of battery Operated "B" Class of 15 mm Size AMR Ultrasonic Meters having no moving part in Contact with water with magnetically sealed coupled and Hermitically sealed register ,with full brass body confirming to ISO 4064 along with manufacturing test certificate with battery life of min.10 years with GSM /RF Technology for communication to server with PC Software including all materials required for fixing ,labour and giving satisfactory leak proof test etc Complete,General Specifications:-1) Meter should be battery operated with no moving parts,low prtesser ,loss,dry type as per FCRI /MID.2)Display:- 8 digit LCD,3)Encloser :-Protection class IP 68 4) Tempature :-Ambit 50deg .C 5) Pressure :-minimum life of 10 Years 7) Memory built -In and should have storage for at least 12 months with daily /monthly accumulated totailised data with time and date should be available .It should able to access memory of the meter through serial communications 8) End Connection:- Screwed up to 40mm BSP/Npt coupling 9) Installation:- Should be able to install in any orientation 10) Transducre :-Inbuilt as per detailed Technical Specifications . 11) The acceptance /routine test shall be either conducted by M/S.Fliud Control Research In stitute ,Palght,Kerala or any of the Laboratories apporved by the National Accerditation Board for Calibration Laboratories (NABL) or EEC pattern apporaval certificates with at least 5 years battery life, including dual channel data loggers ,fixing specials,installation at site etc.. including providing and fixing in position poly propylene water meter box to accommodate water meter all charges and excluding GST and as per Technical Specification
8960
-
-
CAP Bill No: 4.4 SCADA SYSTEM
-
-
-
Supply, deliver and installation of bulk flow meter and other instruments in distribution net work
-
-
-
Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
-
-
-
Zone-1 DMA SC Hostel - 400mm
1
-
-
Zone-2 DMA Guptha Colony - 300mm
1
-
-
Zone-3 DMA P.Kothapalli - 100mm
1
-
-
Zone-4 DMA P.Kondapuram - 200mm
1
-
-
Pressure Transmitter
-
-
-
Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
8
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.
8
-
-
Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer.
-
-
-
100 mm dia
1
-
-
200 mm dia
1
-
-
300 mm dia
1
-
-
400 mm dia
1
-
-
Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years.
1
-
-
Turbidity Analyzer
-
-
-
Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years.
1
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.
1
-
-
Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations suitable for fixing on above Valve Chambers as per approved Departmental designs including cost, conveyance and painting on red Oxide Primer etc complete for finished item of work and as per Technical specification.
1
-
-
Pressure Reducing Valves
-
-
-
Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior.
-
-
-
Zone-1 DMA SC Hostel
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Zone-2 DMA Guptha Colony
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Zone-3 DMA P.Kothapalli
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Zone-4 DMA P.Kondapuram
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Handheld Devices
-
-
-
Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years.
8
-
-
Control Centre
-
-
-
Meter Intergations with server
1
-
-
Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers and as per the Technical Specifiaction
1
-
-
Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years and as per the Technical Specifiaction
1
-
-
Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer and as per the Technical Specifiaction
1
-
-
Printer - 3 in one on color printer with refillable ink bank and as per the Technical Specifiaction
1
-
-
Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per the Technical Specifiaction
1
-
-
CAP Bill No : 4.5 Providing for Implementation of Environmental Management Plan in the estimate for Pamidi Nagar Panchayat.
-
-
-
I. Monitoring Costs : Construction Phase (Two years) and as per Technical specification
-
-
-
Air Quality Monitoring (5 Monitoring station) once in a month for three seasons during the construction period at distribution network and as per Technical specification
10
-
-
Noise level (5 Monitoring station) once in a month for three seasons during the construction period at distribution network and as per Technical specification
10
-
-
Water Quality Monitoring surface / ground (5 Monitoring station) once in a month for three seasons during the construction period at distribution network and as per Technical specification
7
-
-
Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5) including tree guard and as per Technical specification
25
-
-
Sprinkling of water once in a day for two years (excluding rainy days): 300 days @ Rs.1000/trip and as per Technical specification
300
-
-
CAP Bill No: 4.6 Hiring for 1 No Vehicle for 24 Months during execution period.
-
-
-
Hiring for 1 No. Vehicle for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
24
-
-
5.PUTTAPARTHI NAGARA PANCHAYAT (CAPEX)
-
-
-
CAP Bill no : 5.1 Providing comprehensive Distribution net work in the town
-
-
-
Cutting open B.T. road surface (as well as asphalt concrete upto 75 mm thick) including water bound macadam including all labor charges and as per Technical Specification
2634
-
-
Cutting open C.C. Road surface including stacking of excavated materials for pipe line trench work including all labor charges and as per Technical Specification
3617
-
-
Earthwork excavation for Pipe Line trench as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Manual Means including all labour charges and incidental charges etc., complete
30004
-
-
Earthwork excavation for Pipe Line trench as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Mechanical Means including all labour charges, machinary and incidental charges etc., complete
10003
-
-
Excavation in hard rock (blasting prohibited) with Chiseller (Hammer Man) rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification
10003
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification
887
-
-
Supply and Fixing of 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union excluding GST and as per the Technical Specification.
3500
-
-
Supply and Delivery of HDPE PE-100 6 KSC Pipes conforming to IS 4984 - 1995 as amended including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification.
-
-
-
110 OD HDPE Pipes
39507
-
-
160 OD HDPE Pipes
6560
-
-
200 OD HDPE Pipes
5395
-
-
250 OD HDPE Pipes
4878
-
-
Supply and delivery of centrifugally cast (spun) Ductile Iron K-7 pressure pipes for water with socket spigot ends conforming to IS: 8329/2000 as amended suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating including transportation to site of work labour charges for loading & Unloading and stacking as per standards and all incidental charges and also taxes & duties but excluding GST and as per Technical Specification
-
-
-
300mm dia DI K - 7
370
-
-
Supply and delivery of Rubber Gaskets Suitable for DI S/S pipes as Per BIS 12820/89 With S.B.R. Quality Rubber Confirming to BIS: 5382/85 including cost of material, Loading, Incidental Handling With Companys Standard Packing, Transportation, Unloading & Stacking including also taxes & duties but excluding GST and as per Technical Specification
-
-
-
300mm dia DI K - 7
74
-
-
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.
-
-
-
110 OD HDPE Pipes
39507
-
-
160 OD HDPE Pipes
6560
-
-
200 OD HDPE Pipes
5395
-
-
250 OD HDPE Pipes
4878
-
-
Supply and Delivery of HDPE fittings conforming to IS 4984 - 1995 including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification.
-
-
-
TEES
-
-
-
110 OD HDPE Pipes
400
-
-
160 OD HDPE Pipes
69
-
-
200 OD HDPE Pipes
58
-
-
250 OD HDPE Pipes
52
-
-
BENDS
-
-
-
110 OD HDPE Pipes
794
-
-
160 OD HDPE Pipes
134
-
-
200 OD HDPE Pipes
113
-
-
250 OD HDPE Pipes
101
-
-
END CAPS
-
-
-
110 OD HDPE Pipes
136
-
-
160 OD HDPE Pipes
27
-
-
200 OD HDPE Pipes
22
-
-
250 OD HDPE Pipes
19
-
-
REDUCERS
-
-
-
110 OD to 160 OD HDPE Pipes
-
-
-
OD 110mm x 125mm
91
-
-
OD 125mm x 140mm
91
-
-
OD 140mm x 160mm
91
-
-
160 OD to 200 OD HDPE Pipes
-
-
-
OD 160mm x 180mm
18
-
-
OD 180mm x 200mm
18
-
-
160 OD to 250 OD HDPE Pipes
-
-
-
OD 200mm x 225mm
15
-
-
OD 225mm x 250mm
15
-
-
250 OD HDPE Pipes
-
-
-
OD 250mm x 280mm
19
-
-
OD 280mm x 315mm
19
-
-
Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings conforming to IS: 9523/2000 as amended Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) including Transportation, Taxes and Duties but excluding GST and as per Technical Specification
286
-
-
Lowering D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries etc., complete and as per Technical Specification
-
-
-
300mm dia DI K - 7
370
-
-
Jointing D.I. pipes and fittings with rubber gasket (push-on-joint) but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete and as per Technical Specification
-
-
-
300mm dia DI K - 7
78
-
-
Supply and delivery of PN 1.6 D.I D/F "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) confirming to IS 14846 latest amendment and Material of Construction (as per latest codes) as per Technical Specification of the Tender Document including cost and conveyance and stacking as per standards and as directed by Engineer-in-charge
-
-
-
100mm dia Sluice Valves
30
-
-
100mm dia Scour Valves
17
-
-
150mm dia Sluice Valves
10
-
-
150mm dia Scour Valves
8
-
-
200mm dia Sluice Valves
7
-
-
200mm dia Scour Valves
7
-
-
250mm dia Sluice Valves
5
-
-
300mm dia Sluice Valves
1
-
-
Lowering, keeping in position and fixing DI sluice valves (with cap / with hand wheel & reflex valves) including all labor charges and incidental charges and as per Technical Specification
-
-
-
100mm dia Sluice Valves
30
-
-
100mm dia Scour Valves
17
-
-
150mm dia Sluice Valves
10
-
-
150mm dia Scour Valves
8
-
-
200mm dia Sluice Valves
7
-
-
200mm dia Scour Valves
7
-
-
250mm dia Sluice Valves
5
-
-
300mm dia Sluice Valves
1
-
-
Supply, delivery of CI Specials as per IS code including cost and conveyance, labour charges for loading and unloading and stacking as per standards etc., complete and as per technical specifications
33228.2
-
-
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete and as per Technical Specification
-
-
-
100mm dia
60
-
-
150mm dia
20
-
-
200mm dia
14
-
-
250mm dia
10
-
-
300mm dia
12
-
-
Supply and Delivery of PN 1.6 D.I D/F Tamper Proof DI Flanged Single Chamber Air Release Valves confirming to IS 14845 latest amendment and Material of Construction (as per latest code) as per Technical Specification of the Tender Document including cost and conveyance and stacking as per standards and as directed by Engineer-in-charge
-
-
-
40mm dia Air Valves
45
-
-
Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete as per Technical Specification.
45
-
-
Construction of RR Masonry valve chamber as per type design with Earth work, 0.15 Mts sand filling, 0.15 M CC (1:4:8) bed, 0.45 Mts R.R Masonry in CM (1:6) side walls, 0.10 Mt VRCC M20 grade and plastering in CM (1:3) including cost & conveyance of all materials, labour charges, formwork, machine mixing, vibration, curing etc.complete including cost of Plastering, reinforcement & its fabrication charges and as per Technical Specification.
-
-
-
100mm dia Sluice Valves
30
-
-
100mm dia Scour Valves
17
-
-
150mm dia Sluice Valves
10
-
-
150mm dia Scour Valves
8
-
-
200mm dia Sluice Valves
7
-
-
200mm dia Scour Valves
7
-
-
250mm dia Sluice Valves
5
-
-
300mm dia Sluice Valves
1
-
-
40mm dia Air Valves
45
-
-
Road Restoration
-
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification
3880
-
-
Construction of un-reinforced, plain cement concrete pavement, thickness as per M30 (Grade) design, over a prepared sub base, with 43 grade cement, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying primer, sealant, near approaches to culvert and construction joints, admixtures as approved, curing of concrete slabs for 21 - days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification
6595
-
-
Earth filling in foundation trenches with excavated borrowed earth including cost and conveyance all labour charges and as directed by Engineer-in-charge for hard rock portion
10003
-
-
Carting of Excavated Earth with a lead of 3.00 Kms including Loading and Unloading & Conveyance charges for machinery for transporting materials by tippers and trucks and all labor charges and incidental charges and as directed by Engineer-in-Charge
23315
-
-
Providing Safety Protection during pipe line trench work with light based vertical safety cone and tying with safety radium tape roll including cost and conveynce and lbor charges etc., complete as per the technical specification.
28356
-
-
CAP Bill No: 5.2 Providing 15mm dia New House service connections and transfer of Existing house Service connections.
-
-
-
Providing House service connections in to household compound from HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.
b) 1 No. of regulating brass ferrule as per IS 2692
c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.
f) CP bibcock
g) Geotagging of the HSC
h) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever required
j) 40 mm UPVC pipe for drain crossing
and as per Technical Specification
-
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE (Minimum 4.0 Mts MDPE pipe)
5850
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN EARTHEN ROADS (Minimum 7.0 Mts MDPE pipe)
2340
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN CC &BT ROADS (Minimum 7.0 Mts MDPE pipe) (Augur boring with out damaging CC & BT Roads)
3510
-
-
CAP Bill No: 5.3 15mm size AMR Ultrasonic Meters
-
-
-
Provide installing and giving Satisfactory field testing of battery Operated "B" Class of 15mm size AMR Ultrasonic Meters having no moving part in Contact with water with magnetically sealed coupled and Hermitically sealed register ,with full brass body confirming to ISO 4064 along with manufacturing test certificate with battery life of min.10 years with GSM /RF Technology for communication to server with PC Software including all materials required for fixing ,labour and giving satisfactory leak proof test etc Complete,General Specifications:-1) Meter should be battery operated with no moving parts,low prtesser ,loss,dry type as per FCRI /MID.2)Display:- 8 digit LCD,3)Encloser :-Protection class IP 68 4) Tempature :-Ambit 50deg .C 5) Pressure :-minimum life of 10 Years 7) Memory built -In and should have storage for at least 12 months with daily /monthly accumulated totailised data with time and date should be available .It should able to access memory of the meter through serial communications 8) End Connection:- Screwed up to 40mm BSP/Npt coupling 9) Installation:- Should be able to install in any orientation 10) Transducre :-Inbuilt as per detailed Technical Specifications . 11) The acceptance /routine test shall be either conducted by M/S.Fliud Control Research In stitute ,Palght,Kerala or any of the Laboratories apporved by the National Accerditation Board for Calibration Laboratories (NABL) or EEC pattern apporaval certificates with at least 5 years battery life, including dual channel data loggers ,fixing specials,installation at site etc.. including providing and fixing in position poly propylene water meter box to accommodate water meter all charges and excluding GST and as per Technical Specification
11700
-
-
CAP Bill No: 5.4 SCADA SYSTEM
-
-
-
Supply, deliver and installation of bulk flow meter and other instruments in distribution net work
-
-
-
Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
-
-
-
Bedupalli(Zone-1, 500 KL, ELSR) - 250mm
1
-
-
PRASANTHI GRAMAM (Zone-2, 500 KL, ELSR) - 250mm
1
-
-
YEDDULA KONDA (Zone-3, 1200 KL, GLSR) - 250mm
1
-
-
200 mm dia
1
-
-
PUTTAPARTHI PART-1 (Zone-4, 150 KL, ELSR) - 200mm
1
-
-
CHITRAVATHI GUTTA (Zone-5, 300 KL, GLSR) - 150mm
1
-
-
100 mm
1
-
-
KARNATANAG PALLE (Zone-6, 300 KL, GLSR) - 200mm
1
-
-
YENUMULA PALLE GUTTA (Zone-7, 1500 KL, ELSR) - 200mm
1
-
-
300 mm
1
-
-
BRAMHANAPALLE (Zone-8, 500 KL, ELSR) - 250mm
1
-
-
Pressure Transmitter
-
-
-
Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
20
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.
20
-
-
Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer.
-
-
-
100 mm dia
1
-
-
150 mm dia
1
-
-
200 mm dia
4
-
-
250 mm dia
3
-
-
300 mm dia
1
-
-
Chlorine Analyzer
-
-
-
Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years.
1
-
-
Turbidity Analyzer
-
-
-
Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years.
1
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.
1
-
-
Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations suitable for fixing on above Valve Chambers as per approved Departmental designs including cost, conveyance and painting on red Oxide Primer etc complete for finished item of work and as per Technical specification.
1
-
-
Pressure Reducing Valves
-
-
-
Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior.
-
-
-
Bedupalli(Zone-1, 500 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
PRASANTHI GRAMAM (Zone-2, 500 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
YEDDULA KONDA (Zone-3, 1200 KL, GLSR)
-
-
-
100 mm dia
6
-
-
150 mm dia
4
-
-
200 mm dia
2
-
-
PUTTAPARTHI PART-1 (Zone-4, 150 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
CHITRAVATHI GUTTA (Zone-5, 300 KL, GLSR)
-
-
-
100 mm dia
6
-
-
150 mm dia
4
-
-
200 mm dia
2
-
-
KARNATANAG PALLE (Zone-6, 300 KL, GLSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
YENUMULA PALLE GUTTA (Zone-7, 1500 KL, ELSR)
-
-
-
100 mm dia
6
-
-
150 mm dia
4
-
-
200 mm dia
2
-
-
BRAMHANAPALLE (Zone-8, 500 KL, ELSR)
-
-
-
100 mm dia
3
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Handheld Devices
-
-
-
Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years.
8
-
-
Control Centre
-
-
-
Meter Intergations with server
1
-
-
Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers.
1
-
-
Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years
1
-
-
Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer.
1
-
-
Printer - 3 in one on color printer with refillable ink bank as per the Technical Specification
1
-
-
Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
1
-
-
CAP Bill No : 5.5 Providing for Implementation of Environmental Management Plan in the estimate for Puttaparthi Nagara Panchayat.
-
-
-
I. Monitoring Costs : Construction Phase (Two years) and as per Technical specification
-
-
-
Air Quality Monitoring ( 4 Monitoring station) once in a month for three seasons during the period at distribution network
8
-
-
Noise level Monitoring ( 4 Monitoring station) once in a month for three seasons during the construction period at distribution network
8
-
-
Water Quality Monitoring surface / ground (5 Monitoring station) once in a month for three seasons during at distribution network.
10
-
-
Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5) including tree guard and as per Technical specification
10
-
-
Sprinkling of water once in a day for two years (excluding rainy days): 300 days @ Rs.1000/trip.
300
-
-
CAP Bill No: 5.6 Hiring for 1 No. Vehicle for 24 Months during execution period.
-
-
-
Hiring for 1 No. Vehicle for 24 Months during execution period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
24
-
-
1.MADAKASIRA NAGARA PANCHAYAT (OPEX)
-
-
-
Manning, Operation and Maintenance of Madakasira Nagara Panchayat Water Supply Improvement Scheme For 7 Years including 2 years of defect liability period.
-
-
-
OM Bill No: 1.1 Personal required for operating Valves in distribution lines, wages incluidng EPF & ESI
-
-
-
Valve Operator/Turn Cocks
84
-
-
Helpers for Distribution
336
-
-
OM Bill No: 1.2 Hiring for 1 Nos. Vehicles for 84 Months during O&M period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
84
-
-
OM Bill No: 1.3 Repairs to pumpsets & Water pipe lines ( for Five years )
-
-
-
i)Replacement of glands of sluice valves
250
-
-
II) Replacements of balls of Air valves
250
-
-
Om Bill No: 1.4 LEAKAGES
-
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
300 mm DI Pipes
2
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
250 mm HDPE Pipes
5
-
-
200 mm HDPE Pipes
10
-
-
160 mm HDPE Pipes
18
-
-
110 mm HDPE Pipes
35
-
-
OM Bill No:3.5 Providing qualified Diploma with minimum 2 Years of experience in SCADA/Computers , flow meters and instruments maintainence etc including daily routine checks on HMI , Flowmeter , PLC at all locations around the project and also operate ( 2 techinican x 366 days x 7 years = 5124 days ) inc ESI, PF and other statutory levies as directed by the departmental officers
5124
-
-
OM Bill No: 1.5 Service Charge for bill generations , collections and maintainence for 6046 consumers x 12 months x 7 years = 507864 . This item includes cost of consumables .
507864
-
-
OM BILL No: 1.6 II. Monitoring costs : Operation Phase ( One year)
-
-
-
Air Quality Monitoring (4 Monitoring station) once in a month for three seasons during the operation period
8
-
-
Noise level (4 Monitoring station) once in a month for three seasons during the operation period
8
-
-
Water Quality Monitoring surface / ground (6 Monitoring station) once in a month for three seasons during the operation period
12
-
-
2.GOOTY MUNICIPALITY (OPEX)
-
-
-
Manning, Operation and Maintenance of Gooty Municipality Water Supply Improvement Scheme For 7 Years including Defect Liability Period of 2 Years
-
-
-
OM Bill No : 2.1 Personal required for operating Valves in distribution lines, wages incluidng EPF & ESI
-
-
-
Valve Operator/Turn Cocks
336
-
-
Helpers for Distribution
504
-
-
OM Bill No. 2.2: Hiring for 1 No Vehicles for 84 Months during maintenace period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
84
-
-
OM Bill No: 2.3 Repairs to pumpsets & Water pipe lines ( for Five years after Defect Liability period of 2 Years )
-
-
-
Replacement of glands of sluice valves
50
-
-
Replacements of balls of Air valves
50
-
-
Grease
35
-
-
Gland Packing
25
-
-
OM Bill No: 2.4 LEAKAGES
-
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
350 mm DI Pipes
1
-
-
300 mm DI Pipes
3
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
250 mm HDPE Pipes
5
-
-
200 mm HDPE Pipes
10
-
-
160 mm HDPE Pipes
20
-
-
110 mm HDPE Pipes
52
-
-
OM Bill No:2.5 Providing qualified Diploma with minimum 2 Years of experience in SCADA/Computers , flow meters and instruments maintainence etc including daily routine checks on HMI , Flowmeter , PLC at all locations around the project and also operate ( 2 techinican x 366 days x 7 years = 5124 days ) inc ESI, PF and other statutory levies as directed by the departmental officers
5124
-
-
OM Bill No:2.6 Service Charge for bill generations , collections and maintainence for 19168 consumers x 12 months x 7 years = 1610112 . This item includes cost of consumables .
1610112
-
-
OM Bill No: 2.7 Monitoring costs : Operation Phase ( One year)
-
-
-
Air Quality Monitoring (5 Monitoring stations) twice in a year at distribution network and as per Technical specification
4
-
-
Noise level Monitoring ( 5 Monitoring stations) twice in a year at at distribution network and as per Technical specification.
4
-
-
Water Quality Monitoring ( 6 Monitoring Locations) twice in a year at and distribution network and as per Technical specification
6
-
-
3.KALYANADURGAM MUNICIPALITY (OPEX)
-
-
-
Manning, Operation and Maintenance of Kalyanadurgam Municipality Water Supply Improvement Scheme For 7 Years including 2 Years Defect Liability Period of 2 Years
-
-
-
OM Bill No : 3.1 Personal required for operating Valves in distribution lines including EPF&ESI
-
-
-
Valve Operator/Turn Cocks
504
-
-
Helpers for Distribution
1008
-
-
OM Bill No: 3.2 Hiring for 1 No Vehicles for 84 Months during O&M period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
84
-
-
OM Bill No: 3.3 Repairs to pumpsets & Water pipe lines ( for Five years after Defect Liability Period of 2 years )
-
-
-
Replacement of glands of sluice valves
75
-
-
Replacements of balls of Air valves
80
-
-
Grease
30
-
-
Gland Packing
20
-
-
OM Bill No: 3.4 LEAKAGES
-
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
300 mm DI Pipes
5
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
250 mm HDPE Pipes
8
-
-
200 mm HDPE Pipes
25
-
-
160 mm HDPE Pipes
35
-
-
110 mm HDPE Pipes
45
-
-
OM Bill No:3.5 Providing qualified Diploma with minimum 2 Years of experience in SCADA/Computers , flow meters and instruments maintainence etc including daily routine checks on HMI , Flowmeter , PLC at all locations around the project and also operate ( 2 techinican x 366 days x 7 years = 5124 days ) inc ESI, PF and other statutory levies as directed by the departmental officers
5124
-
-
OM Bill No: 3.6 Service Charge for bill generations , collections and maintainence for 11467 consumers x 12 months x 7 years = 963228 . This item includes cost of consumables .
963228
-
-
OM Bill No: 3.7 Monitoring costs : Operation Phase ( One year)
-
-
-
Air Quality Monitoring (5 Monitoring stations) twice in a year in distribution network).
10
-
-
Noise level Monitoring ( 5 Monitoring stations) twice in a year distribution network.
10
-
-
Water Quality Monitoring ( 6 Monitoring Locations) twice in a year In distribution network.
14
-
-
4.PAMIDI NAGARA PANCHAYAT (OPEX)
-
-
-
Manning, Operation and Maintenance of Pamidi Nagar Panchayat Water Supply Improvement Scheme For 7 Years including Defect Liability Period of 2 years
-
-
-
OM Bill No : 4.1 Personal required for operating Valves in distribution lines, wages incluidng EPF & ESI
-
-
-
Valve Operator/Turn Cocks
168
-
-
Helpers for Distribution
336
-
-
OM Bill No: 4.2 Hiring for one Vehicle for 84 Months duringO&M period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
84
-
-
OM Bill No: 4.3 Repairs to pumpsets & Water pipe lines ( for Five years after Defect Liability Period of 2 Years)
-
-
-
Replacement of glands of sluice valves
40
-
-
Replacements of balls of Air valves
40
-
-
Grease
25
-
-
Gland Packing
20
-
-
OM Bill No: 4.4 LEAKAGES
-
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
400 mm DI Pipes
1
-
-
350 mm DI Pipes
2
-
-
300 mm DI Pipes
2
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
250 mm HDPE Pipes
5
-
-
200 mm HDPE Pipes
8
-
-
160 mm HDPE Pipes
15
-
-
110 mm HDPE Pipes
40
-
-
OM Bill No:4.5 Providing qualified Diploma with minimum 2 Years of experience in SCADA/Computers , flow meters and instruments maintainence etc including daily routine checks on HMI , Flowmeter , PLC at all locations around the project and also operate ( 2 techinican x 366 days x 7 years = 5124 days ) inc ESI, PF and other statutory levies as directed by the departmental officers
5124
-
-
OM Bill No: 4.6 Service Charge for bill generations , collections and maintainence for 8960 consumers x 12 months x 7 years = 752640 This item includes cost of consumables .
752640
-
-
OM Bill No: 4.7 Monitoring costs : Operation Phase ( One year)
-
-
-
Air Quality Monitoring (5 Monitoring station) twice in a year during operation period at Distribution network and as per Technical specification
10
-
-
Noise level Monitoring (5 Monitoring station) twice in a year during operation period at Distribution network and as per Technical specification
10
-
-
Water Quality Monitoring (5 Monitoring station) twice in during operation period at Distribution network and as per Technical specification
10
-
-
5.PUTTAPARTHY NAGAR PANCHAYAT (OPEX)
-
-
-
Manning, Operation and Maintenance of Puttaparthi Nagar Panchayat Water Supply Improvement Scheme For 7 Years including defect Liability Period of 2 Years
-
-
-
OM Bill No : 5.1 Personal required for operating Valves in distribution lines, wages incluidng EPF & ESI
-
-
-
Valve Operator/Turn Cocks
252
-
-
Helpers for Distribution
504
-
-
OM Bill No: 5.2 Hiring for 1 No. Vehicle for 84 Months during O&M period including hire charges of vehicle, diesel, lubrication, driver charges, repairs and all incidental charges etc.,
84
-
-
OM Bill No: 5.3 Repairs to pumpsets & Water pipe lines ( for Five years after Defect Liability Period of 2 Years )
-
-
-
Replacement of glands of sluice valves
30
-
-
Replacements of balls of Air valves
30
-
-
Grease
25
-
-
Gland Packing
20
-
-
OM Bill No: 5.4 LEAKAGES
-
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
300 mm DI Pipes
2
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
250 mm HDPE Pipes
5
-
-
200 mm HDPE Pipes
10
-
-
160 mm HDPE Pipes
18
-
-
110 mm HDPE Pipes
35
-
-
OM Bill No:5.5 Providing qualified Diploma with minimum 2 Years of experience in SCADA/Computers , flow meters and instruments maintainence etc including daily routine checks on HMI , Flowmeter , PLC at all locations around the project and also operate ( 2 techinican x 366 days x 7 years = 5124 days ) inc ESI, PF and other statutory levies as directed by the departmental officers
5124
-
-
OM Bill No: 5.6 SService Charge for bill generations , collections and maintainence for 11700 consumers x 12 months x 7 years = 982800 . This item includes cost of consumables .
982800
-
-
OM Bill No: 5.7 Monitoring costs : Operation Phase ( One year)
-
-
-
Air Quality Monitoring (5 Monitoring station) twice in a year during operation period at Distribution network
6
-
-
Noise level Monitoring (5 Monitoring station) twice in a year during operation period at Distribution network
6
-
-
Water Quality Monitoring (5 Monitoring station) twice in during operation period at Distribution network
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements