Municipal Administration And Urban Development Department Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Municipal Administration And Urban Development Department Tender
Eprocure
Opening Date24 Dec 2018
Closing Date24 Jan 2019
Tender AmountRefer Documents
Costs
EMD
₹ 86,37,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_MAUD_422452_1Bid Award Id
ViewTender No
IFT No.13014/AIIB/WSIS/VZMTender Authority
Municipal Administration And Urban Development Department ViewPurchaser Address
-Website
http://http://www.appublichealth.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Cutting open Cement concrete road surface and depositing of excavated materials including all labour charges and all incidental and operational charges etc., complete for pipe line works.
2739.78
-
-
Earthwork in excavation for Pipe Line as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Mechanical Means.
44227
-
-
Earthwork in excavation for Pipe Line as per drawing and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material by Manual Means.
8292.6
-
-
Earthwork excavation in soft rock , HDR by breaking of rock for pipeline trenches without blasting as per specification drawing and as directed by departmental officers and to protecting the existing walls and other structures etc., so as not to disturb the existing utility services existing water supply lines, sewers, telephone,power cables/ducts, storm water drains, traffic signals ,etc., during the laying of pipe line taking all precautionary measures in the restricted areas with the initial lead of 50mts and intial lift of 3m for pipeline trenches for laying of water main taking all precautionary measures in the restricted areas such as urban areas including divertion of traffic including all incidental and operational charges etc., complete
2764.2
-
-
Providing of compacted Sand bed below the pipe including cost, conveyance including watering, tamping and ramming complying with specifications for filling.
4469.1
-
-
Supply and Delivary of Centrifugally Cast (Spun) Ductile Iron Pressure Pipes For Water, Gas And Sewage With Socket Spigot Ends Conforming To I.S.: 8329/2000 In Standard Working Lengths Of 4, 5 5.5 & 6 Meter For Classification K7 Suitable For Push-On-Joint (Rubber Gasket D Jointing) With Cement Mortar Lining Inside The Pipes With Outside Zinc Coating. Rates Are Ex-Factory, including Transportation.
-
-
-
400mm dia DI K7
498
-
-
350mm dia DI K7
258
-
-
300mm dia DI K7
162
-
-
Manufacture as per BIS 12820/89 with S.B.R. Quality Rubber Confirming to BIS: 5382/85, Supply and Delivery of Rubber Gaskets suitable for C.I/ D.I. S/S PIPES anywhere in A.P. inclduing cost of material,loading, incidental handling with companys standard packing,transporation, unloading & stacking ., complete
-
-
-
400mm dia DI K7
83
-
-
350mm dia DI K7
43
-
-
300mm dia DI K7
27
-
-
Manufacture, supply and delivery of PE100/ 6 KSC HDPE pipes condirming to I.S 4984 - 1995 including transportation to anywhere in A.P, including specials etc; complete
-
-
-
250mm dia HDPE 6KSC PE 100
1577
-
-
200mm dia HDPE 6KSC PE 100
7370
-
-
160mm dia HDPE 6KSC PE 100
6889
-
-
110mm dia HDPE 6KSC PE 100
44142
-
-
Lowering the DI pipes fittings with S/S ends carefully in to the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS no. 3114 / 85 - 1 RM-
-
-
-
400mm dia DI K7
493
-
-
350mm dia DI K7
256
-
-
300mm dia DI K7
157
-
-
Jointing the CI/DI Pipes & fittings with Rubber gaskets, excluding cost of gasket but including all sundries filling with water, with a water lead upto 500m and testing to required pressure complete. as per BIS No.3114/85
-
-
-
400mm dia DI K7
83
-
-
350mm dia DI K7
43
-
-
300mm dia DI K7
27
-
-
Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to the required pressure.
-
-
-
250mm dia HDPE 6KSC PE 100
1577
-
-
200mm dia HDPE 6KSC PE 100
7370
-
-
160mm dia HDPE 6KSC PE 100
6889
-
-
110mm dia HDPE 6KSC PE 100
44142
-
-
Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538.
-
-
-
100mm dia D/F sluice valves P.N 1.6 Type
45
-
-
150mm dia D/F sluice valves P.N 1.6 Type
16
-
-
200 mm dia D/F sluice valves P.N 1.6 Type
1
-
-
250 mm dia D/F sluice valves P.N 1.6 Type
2
-
-
100mm dia Isolated Sluice Valves with scour Arrangements
5
-
-
Labour charges for lowering and keeping in position the CI sluice valves& Scour Valves of following diameters including all incidental and operational charges etc, complete as directed by the departement officers
-
-
-
100mm dia D/F sluice valves P.N 1.6 Type
45
-
-
150mm dia D/F sluice valves P.N 1.6 Type
16
-
-
200 mm dia D/F sluice valves P.N 1.6 Type
1
-
-
250 mm dia D/F sluice valves P.N 1.6 Type
2
-
-
100mm dia Isolated Sluice Valves with scour Arrangements
5
-
-
Manufacture, supply and delivery of Tamper Proof DI Flanged Single Chamber Air Release Valves with Body and cover in Ductile Iron of grade GGG-40/SG 400/15 or GGG-50/SG 500-7 or equivalent as per I.S.3896-part2 with Food Grade Epoxy Powder Coating (EP-P) ( Min.250 Micron) inside and outside of color Blue RAL 5005. All internal parts such as float, shell, cover Bolts etc., made in Austenitic alloy steel of SS AISI 304/316 and DN50 float of the other components with ABS/PTFE/EPDM/NBR and generally conforming to DIN/BIS/AWWA stantards (or) combination Flange drilling as per IS-1538 and inclusive of transpotation
-
-
-
80mm dia
5
-
-
100mm dia
1
-
-
Labour Charges for fixing Air Valves including boring the mains and threading the bore fixing Nipple etc., complete
-
-
-
80mm dia
5
-
-
100mm dia
1
-
-
Providing VRCC precast / cast-in-situ Sluice / Scour Valve Chambers in VCC M25 prop. using 20mm graded SS-5 HBG m/c metal coarse and fine aggregates conforming to IS 383, for bed blocks & slab and CRS masonry second sort in C.M 1:6 Prop. side walls , and OPC (cement content between 330 to 350 kg/cum as per IRC mix design for Fair degree of quality control), including cost and conveyance of all materials, machinery, labour, centering, vibration, curing for 21 days and all incidental charges etc. complete but including cost of steel and its fabrication, conforming to standard specification
-
-
-
Valve Chamber 1.1x1.1x1.30m
3
-
-
Valve Chamber 1.0x1.0x1.20m
72
-
-
CENTRIFUGALLY CAST (SPUN) DUCTILE IRON fittings conforming to IS:9523/2000 having dimensions as per table. The rates mentioned here under are for fittings, zinc coated externally with inside mortar lining (with finishing AS PER CLASS 13/IS 9523/2000) ( ex-works) including transportationetc.
2500
-
-
Collection , supply & filling crusher stone dust including watering, tamping, etc complete for Restoration of Roads
10961.28
-
-
V.P.C.C. M30 Grade using 20 mm HBG metal exculding the cost of steel in reinforcement, but including centring charges, laying , levelling , machine mixing etc
6211.39
-
-
CAP Bill No: 1.2 Providing Domestic House Service Connections
-
-
-
Providing House service connections on HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.
b) 1 No. of regulating brass ferrule as per IS 2692
c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.
f) CP bibcock
g) Geotagging of the HSC
h) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever required
j) UPVC pipe for drain crossing
and as per Technical Specification
-
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD SIDE IN EARTHEN ROADS
6000
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN EARTHEN ROADS
2400
-
-
PROVIDING HOUSE SERVICE CONNECTIONS AT HOUSEHOLD OPPOSITE SIDE IN CC &BT ROADS
3600
-
-
CAP Bill No: 1.3 Providing "B" Class AMR Ultrasonic Meters
-
-
-
Supply, delivery, installing, satisfactory testing and commissioning of domestic Battery operated electronically compatible AMR Ultrasonic or AMR Electromagnetic Water Meters from 15 mm to 40 mmWater Meters having No moving parts in contact with water with body made up of brass or composite materials confirming to ISO along with manufacturing test certificate and Guarantee certificate with Battery life of min. 10 years with GSM /GPRS/ RF Technology for communication to server with PC Software via handheld reader or directly, including all material required for fixing, labour & giving satisfactory leak proof test etc Complete with poly-propylenemeter box. General Specifications: Meter should be battery operated with no moving parts, low pressure loss. Display: 8 digit LCD, Protection class IP 68 , Operating temperature 10 C to 55 C deg. , Accuracy up to +/- 2% and unaffected by Operating temperature , Pressure : PN 1.6 MPa, power supply : 3.1 to 3.7 VDC lithium battery with minimum life of more than 10 years. Flow Measurement Range 1 to 3000L/H, Warrantyrequired for10years. Memory built-in and should have storage for at least 12 months with daily / monthly accumulated totalised data with time and date should be available. It should be able to access memory of the meter through serial communication. The readings should be obtainable by either walkby or stationery pole with specific range or drive by on Android device. The acceptance / routine tests shall be either conducted by M/s. Fluid Control Research Institute, Palghat, Kerala or any of the Laboratories approved by the National Accreditation Board for calibration Laboratories (NABL) or installation at site etc. complete includingpoly-propylene box for keeping the meter. Including all charges excluding tax.
12000
-
-
CAP Bill No: 1.4 Supply, deliver and installation of bulk flow meter including other instruments in the deliveries for the DMAs of PARVATHIPURAM
-
-
-
Electromagnetic Flow Meters: Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
-
-
-
Zone-1 DMA Ganga Sagaram INLET 400 mm Dia
-
-
-
400mm
1
-
-
Zone-2 DMA Municipal Office INLET 300 mm Dia
-
-
-
300mm
1
-
-
Zone-3 DMA Kothavalasa School INLET 200 mm Dia
-
-
-
200mm
1
-
-
Zone-4 DMA Belgoan INLET 200 mm Dia
-
-
-
200mm
1
-
-
Zone-5 DMA Belgoan INLET 250 mm Dia
-
-
-
250mm
1
-
-
Zone-6 DMA Belgoan INLET 300 mm Dia
-
-
-
300mm
1
-
-
Pressure Transmitter
-
-
-
Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
12
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.
12
-
-
Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer.
-
-
-
200 mm
2
-
-
250 mm
1
-
-
300 mm
2
-
-
400 mm
1
-
-
Chlorine Analyzer :Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years.
1
-
-
Turbidity Analyzer: Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years.
1
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.
1
-
-
Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations where ever necessary. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
1
-
-
Pressure Reducing Valves:Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior.
-
-
-
Zone-1 DMA Ganga Sagaram
-
-
-
100 mm
2
-
-
150 mm
1
-
-
200 mm
1
-
-
Zone-2 DMA Municipal Office
-
-
-
100 mm
2
-
-
150 mm
1
-
-
200 mm
1
-
-
Zone-3 DMA Kothavalasa School
-
-
-
100 mm
2
-
-
150 mm
1
-
-
200 mm
1
-
-
Zone-4 DMA Belgoan
-
-
-
100 mm
2
-
-
150 mm
1
-
-
200 mm
1
-
-
Zone-5 DMA Belgoan
-
-
-
100 mm
2
-
-
150 mm
1
-
-
200 mm
1
-
-
Zone-6 DMA Belgoan
-
-
-
100 mm
2
-
-
150 mm
1
-
-
200 mm
1
-
-
Handheld Devices: Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years.
8
-
-
Control Centre
-
-
-
Meter Intergations with server
1
-
-
Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers.
1
-
-
Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years
1
-
-
Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer.
1
-
-
Printer - 3 in one on color printer with refillable ink bank
1
-
-
Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
1
-
-
CAP Bill No: 1.5 Environmental and Social Mitigation Plan (EMP) for Parvathipuram Municipality
-
-
-
I. Monitoring Costs : Construction Phase (Two years) and as per Technical specification
-
-
-
Air Quality Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period at distribution network and as per Technical specification
15
-
-
Noise level Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period distribution network and as per Technical specification
15
-
-
Water Quality Monitoring surface / ground (6 Monitoring station) once in a month for three seasons during the construction period distribution network and as per Technical specification
18
-
-
II. Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5) and as per Technical specification
90
-
-
III. Sprinkling of water with 5000 Litres capacity tankers once in a day for 100 days (excluding rainy days) and as per Technical specification
100
-
-
(OPEX)O&M Bill No:1.6 Manning, Operation and Maintenance of Parvathipuram Municipality Water Supply Improvement Scheme for 7 years
-
-
-
A) PERSONAL
-
-
-
Personal required for operating Valves in distribution lines including EPF and EPI
-
-
-
Valve Operator/Turn Cocks
168
-
-
Helpers for Distribution
168
-
-
Tools & other items
-
-
-
Replacement of glands of sluice valves
65
-
-
Replacements of balls of Air valves
75
-
-
Grease
45
-
-
Gland Packing
35
-
-
B) LEAKAGES
-
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
350 mm DI Pipes
1
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
250 mm HDPE Pipes
1
-
-
160 mm HDPE Pipes
1
-
-
110 mm HDPE Pipes
6
-
-
Providing qualified diploma personal with minimum 2 Years of experience in Computers/ bulk flow meters and instruments maintainence etc. The member task is to maintain the system , including daily routine checks of all field instruments etc as directed by the departmental officers ( 2 techinican x 366 days x 7 years = 5124 days ) inc ESI, PF and other statutory levies as directed by the departmental officers.
5124
-
-
Service Charge for bill generations , collections and maintainence for 10000 consumers x 12 months x 7 years = 840000 . This item includes cost of consumables .
840000
-
-
Operation phase: Water quality monitoring at Intake Quarterly for at least 2 years ( 4x2= 8 samples)
8
-
-
Operation phase Monitoring of Noise Level at intake and WTP Quarterly for 2 years(4x2x2 = 16samples)
15
-
-
Operation phase Ambient Air Quality Monitoring at intake, WTP and Raw & clear water Rising Main for a period of two years, 1 day in each time (Total approx 10 locations x 5 times = 50 samples) semi annually
20
-
-
2) Bobbili Municipality :
-
-
-
CAP BILL NO.2.1 Providing Distribution System in Zones I to VI of Bobbili Muicipality
-
-
-
Cutting open BT road surface as well as asphalt concrete upto 75mm thick including water bound mecadam and stacking of useful materials including all labour charges and all incidental and operational charges etc., complete for pipe line works.
15024.59
-
-
Cutting open Cement concrete road surface and depositing of excavated materials including all labour charges and all incidental and operational charges etc., complete for pipe line works.
3505.74
-
-
Barricading ,hoarding , lighting and diversion of traffic,providing caution boards and wacthing for water supply and sewerage works including all labour charges and all incidental and operational charges etc., complete for pipe line works.
133551.88
-
-
Earthwork excavation by Machinery in ordinary soils including setting out, removal of stumps and other deleterious material and disposal upto a lead of 50 m, etc complete for pipe line trenches & building foundations where depth is less than 1.50 times the width upto a depth of 3.00m
46175.59
-
-
Earthwork excavation by Manually in ordinary soils including setting out, removal of stumps and other deleterious material and disposal upto a lead of 50 m, etc complete for pipe line trenches & building foundations where depth is less than 1.50 times the width upto a depth of 3.00m
19789.54
-
-
Manufacture and supply of the following HDPE PE 100 grade pipes conforming to IS 4894-1995 including transportation to any where in Andhra Pradesh including ST, CED and other duties etc. complete.
-
-
-
355 mm dia PN 6
1075.22
-
-
315 mm dia PN 6
4197.24
-
-
280 mm dia PN 6
4602.53
-
-
250 mm dia PN 6
2883.51
-
-
225 mm dia PN 6
2284.67
-
-
200 mm dia PN 6
9533.85
-
-
180 mm dia PN 6
367.27
-
-
160 mm dia PN 6
10343.59
-
-
140 mm dia PN 6
904.51
-
-
110mm dia PN 6
35856.01
-
-
Laying and jointing of HDPE pipes by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe to the required pressure.
-
-
-
355 mm dia PN 6
1075.22
-
-
315 mm dia PN 6
4197.24
-
-
280 mm dia PN 6
4602.53
-
-
250 mm dia PN 6
2883.51
-
-
225 mm dia PN 6
2284.67
-
-
200 mm dia PN 6
9533.85
-
-
180 mm dia PN 6
367.27
-
-
160 mm dia PN 6
10343.59
-
-
140 mm dia PN 6
904.51
-
-
110mm dia PN 6
35856.01
-
-
Manufacture and supply of the following HDPE fittings conforming to IS 4894-1995 including transportation to any where in Andhra Pradesh excluding ST, CED and other duties etc. complete.
-
-
-
TEE's
-
-
-
355 mm dia PN 6
4
-
-
315 mm dia PN 6
17
-
-
280 mm dia PN 6
19
-
-
250 mm dia PN 6
12
-
-
225 mm dia PN 6
9
-
-
200 mm dia PN 6
38
-
-
180 mm dia PN 6
1
-
-
160 mm dia PN 6
41
-
-
140 mm dia PN 6
3
-
-
110mm dia PN 6
143
-
-
Reducers
-
-
-
280 mm dia PN 6
6
-
-
250 mm dia PN 6
3
-
-
225 mm dia PN 6
3
-
-
200 mm dia PN 6
14
-
-
160 mm dia PN 6
13
-
-
140 mm dia PN 6
1
-
-
110 mm dia PN 6
47
-
-
Bends
-
-
-
355 mm dia PN 6
1
-
-
315 mm dia PN 6
5
-
-
280 mm dia PN 6
4
-
-
250 mm dia PN 6
3
-
-
225 mm dia PN 6
2
-
-
200 mm dia PN 6
9
-
-
160 mm dia PN 6
10
-
-
140 mm dia PN 6
1
-
-
110 mm dia PN 6
36
-
-
Pipe end long neck
-
-
-
355 mm dia PN 6
2
-
-
315 mm dia PN 6
7
-
-
280 mm dia PN 6
7
-
-
250 mm dia PN 6
5
-
-
225 mm dia PN 6
4
-
-
200 mm dia PN 6
16
-
-
180 mm dia PN 6
1
-
-
160 mm dia PN 6
19
-
-
140 mm dia PN 6
1
-
-
110 mm dia PN 6
60
-
-
M.S. Flanges
-
-
-
355 mm dia PN 6
24
-
-
315 mm dia PN 6
60
-
-
280 mm dia PN 6
84
-
-
250 mm dia PN 6
39
-
-
225 mm dia PN 6
41
-
-
200 mm dia PN 6
112
-
-
180 mm dia PN 6
4
-
-
160 mm dia PN 6
170
-
-
140 mm dia PN 6
14
-
-
110 mm dia
623
-
-
for Valves
-
-
-
40mm
148
-
-
50mm
46
-
-
100mm
280
-
-
150mm
28
-
-
200mm
12
-
-
250mm
40
-
-
End Caps
-
-
-
100mm dia
300
-
-
Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/ SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538.
-
-
-
300 mm dia
2
-
-
250 mm dia
18
-
-
200 mm dia
12
-
-
150 mm dia
18
-
-
100 mm dia
59
-
-
for scour valves
71
-
-
Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality.S Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538.
-
-
-
80mm
20
-
-
80mm
33
-
-
Lowering, laying and keeping in position of DI sluice, reflux valves in the excavated trenches true to alignment and gradient including all charges as per SS and as directed by the department.
-
-
-
300 mm dia
2
-
-
250 mm dia
18
-
-
200 mm dia
12
-
-
150 mm dia
18
-
-
100 mm dia
130
-
-
Laying and fixing of DAV including boaring and threading of bore including all labour charges etc., complete.
-
-
-
50mm dia
20
-
-
40mm dia
27
-
-
Supply and delivery of the C.I. pipes and specials, confirming to IS:1538 -1993 of standard /non standard including cost and conveyence, packing , forwarding , transit risk etc,. complete but excluding all taxes and duties
22925
-
-
Jointing the CI/DI pipes and specials with double flanged ends using bolts, nuts, and rubber insertion including all labour charges and other charges as per SS asd as directed by the department.
-
-
-
300 mm dia
4
-
-
250 mm dia
36
-
-
200 mm dia
24
-
-
150 mm dia
36
-
-
100 mm dia
-
-
-
Control valves & Scour valves
899
-
-
50 mm dia
94
-
-
Construction of R.C.C.valve chamber in M20 Grade concrete as per Type design including cost & conveyance of all materials , labour charges, formwork,machine mixing,vibration , curing etc.complete but excluding cost of Manhole cover ,reinforcement & its fabrication charges.
-
-
-
Control valves
-
-
-
300 mm dia
2
-
-
250 mm dia
18
-
-
200 mm dia
12
-
-
150 mm dia
18
-
-
100 mm dia
130
-
-
Air valves
47
-
-
Carting of earth to a lead of 5 KM including all chages etc. complete.
8712
-
-
Collection, supply and filling of stone dust/quarry spall to work site including cost and conveyance of all materials and all labour charges for flling etc., complete.
12968
-
-
V.P.C.C. M30 Grade using 20 mm HBG metal exculding the cost of steel in reinforcement, but including centring charges, laying , levelling , machine mixing etc
7349.1
-
-
BILL NO.2.2. Poviding HSCs in 6 Zones
-
-
-
Providing House service connections on HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.b) 1 No. of regulating brass ferrule as per IS 2692c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.f) CP bibcockg) Geotagging of the HSCh) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever requiredj) UPVC pipe for drain crossingand as per Technical Specification
-
-
-
Providing House Service Connections on House side (Minimum 4.0 Mts MDPE pipe)
3533
-
-
Providing House Service Connections on opposite side in earthen roads.(Minimum 7.0 Mts MDPE pipe)
1307
-
-
Providing House Service Connections on opposite side in CC &BT Roads (Minimum 7.0 Mts MDPE pipe)
2226
-
-
BILL NO.2.3. Providing "B" Class AMR Ultrasonic Meters
-
-
-
Supply, delivery, installing, satisfactory testing and commissioning of domestic Battery operated electronically compatible AMR Ultrasonic or AMR Electromagnetic Water Meters from 15 mm to 40 mmWater Meters having No moving parts in contact with water with body made up of brass or composite materials confirming to ISO along with manufacturing test certificate and Guarantee certificate with Battery life of min. 10 years with GSM /GPRS/ RF Technology for communication to server with PC Software via handheld reader or directly, including all material required for fixing, labour & giving satisfactory leak proof test etc Complete with poly-propylenemeter box. General Specifications: Meter should be battery operated with no moving parts, low pressure loss. Display: 8 digit LCD, Protection class IP 68 , Operating temperature 10 C to 55 C deg. , Accuracy up to +/- 2% and unaffected by Operating temperature , Pressure : PN 1.6 MPa, power supply : 3.1 to 3.7 VDC lithium battery with minimum life of more than 10 years. Flow Measurement Range 1 to 3000L/H, Warrantyrequired for10years. Memory built-in and should have storage for at least 12 months with daily / monthly accumulated totalised data with time and date should be available. It should be able to access memory of the meter through serial communication. The readings should be obtainable by either walkby or stationery pole with specific range or drive by on Android device. The acceptance / routine tests shall be either conducted by M/s. Fluid Control Research Institute, Palghat, Kerala or any of the Laboratories approved by the National Accreditation Board for calibration Laboratories (NABL) or installation at site etc. complete includingpoly-propylene box for keeping the meter. Including all charges excluding tax.
8818
-
-
CAP BILL NO.2.4.Supply distrubution and fixing, installation of Flowmeters, Motorised Valves, Level Indicators including Supervisory Control and Data Acuasation System (SCADA) for controlling and monitoring of the bulk water supply pipelines for Collection Well cum Pump House at Suwarnamukhi, and 6 Service Reservoirs.(Zone-1-500KL ,Zone-2,1000Kl,Zone-3-700KL, Zone-4-1500KL,Zone-5-1000Kl and Zone-6-800KL)
-
-
-
Electromagnetic Flow Meters Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical Specification
-
-
-
Zone-1 (Mallammapeta) DMA INLET 300mm Dia
1
-
-
Zone-2 (Rani mallammadevi park) DMA INLET 300mm Dia
1
-
-
Zone-3 (Municipal office) DMA INLET 300mm Dia
1
-
-
Zone-4 (Baligipeta) DMA INLET 400mm Dia
1
-
-
Zone-5 (ITI Colony) DMA INLET 400mm Dia
1
-
-
Zone-6 (NTR Colony) DMA INLET 400mm Dia
1
-
-
Pressure Transmitter-Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers and as per Technical Specification
12
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format as per Technical Specification
13
-
-
Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer as per Technical Specification
-
-
-
300 mm
6
-
-
Chlorine Analyzer-Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years and as per Technical Specification
1
-
-
Turbidity Analyzer-Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years and as per Technical Specification
1
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format and as per Technical Specification
1
-
-
Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations where ever necessary. This item shall, including cost, conveyance, etc complete as directed by the departmental officer and as per Technical Specification
1
-
-
Pressure Reducing Valves-Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior and as per Technical Specification
-
-
-
Zone-1 DMA-Mallammapeta
-
-
-
100 mm
3
-
-
150 mm
2
-
-
200 mm
1
-
-
Zone-2 DMA- Rani mallammadevi park
-
-
-
100 mm
3
-
-
150 mm
2
-
-
200 mm
1
-
-
Zone-3 (Municipal office) DMA
-
-
-
100 mm
3
-
-
150 mm
2
-
-
200 mm
1
-
-
Zone-4 (Baligipeta) DMA
-
-
-
100 mm
3
-
-
150 mm
2
-
-
200 mm
1
-
-
Zone-5 (ITI Colony) DMA
-
-
-
100 mm
3
-
-
150 mm
2
-
-
200 mm
1
-
-
Zone-6 (NTR Colony) DMA
-
-
-
100 mm
3
-
-
150 mm
2
-
-
200 mm
1
-
-
Handheld Devices Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years and as per Technical Specification
8
-
-
Control Centre
-
-
-
Meter Intergations with server and as per Technical Specification
1
-
-
Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers.
1
-
-
Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years
1
-
-
Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer and as per Technical Specification
1
-
-
Printer - 3 in one on color printer with refillable ink bank and as per Technical Specification
1
-
-
Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
1
-
-
CAP Bill No : 2.5 Providing for Implementation of Environmental Management Plan(EMP) in the estimate for Bobbili Municipality.
-
-
-
I. Monitoring Costs : Construction Phase (Two years) and as per Technical specification
-
-
-
Air Quality Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period at distribution network and as per Technical specification
15
-
-
Noise level Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period distribution network and as per Technical specification
15
-
-
Water Quality Monitoring surface / ground (6 Monitoring station) once in a month for three seasons during the construction period distribution network and as per Technical specification
21
-
-
II. Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5) and as per Technical specification
50
-
-
III. Sprinkling of water with 5000 Litres capacity tankers once in a day for 100 days (excluding rainy days) and as per Technical specification
300
-
-
(OPEX) OM Bill No : 2.6 Manning, Operation and Maintenance of BobbiliMunicipality Water Supply Improvement Scheme For 7 Years.
-
-
-
Personal required for operating Valves in distribution lines including EPF&ESI
-
-
-
Valve Operator/Turn Cocks
504
-
-
Helpers for Distribution
336
-
-
Repairs to pumpsets & Water pipe lines ( for Five years )
-
-
-
i)Replacement of glands of sluice valves
20
-
-
II) Replacements of balls of Air valves
38
-
-
ii)Grease
15
-
-
iv) Gland Packing
8
-
-
LEAKAGES
-
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
300 mm DI Pipes
3
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
250 mm HDPE Pipes
4
-
-
200 mm HDPE Pipes
15
-
-
160 mm HDPE Pipes
20
-
-
110 mm HDPE Pipes
45
-
-
Providing qualified Diploma with minimum 2 Years of experience in SCADA/Computers , flow meters and instruments maintainence etc including daily routine checks on HMI , Flowmeter , PLC at all locations around the project and also operate ( 2 techinican x 366 days x 7 years = 5124 days ) inc ESI, PF and other statutory levies as directed by the departmental officers
5124
-
-
Service Charge for bill generations , collections and maintainence for 15000consumers x 12 months x 7 years = 740712 . This item includes cost of consumables .
740712
-
-
Monitoring costs : Operation Phase ( One year)
-
-
-
Air Quality Monitoring (5 Monitoring stations) twice in a year in distribution network).
10
-
-
Noise level Monitoring ( 5 Monitoring stations) twice in a year distribution network.
10
-
-
Water Quality Monitoring ( 6 Monitoring Locations) twice in a year In distribution network.
14
-
-
3) Saluru Municipality :
-
-
-
BILL NO 3.1 Laying HDPE Distribution Lines
-
-
-
Cutting open BT road surface as well as asphalt concrete including water bound macadam and stacking of excavated materials for pipe line trench work. as directed by the departmental officers.
2186.5
-
-
Cutting open C.C. road surface including stacking of excavated materials for pipe line trench work. as directed by the departmental officers.
655.32
-
-
Cutting open water bound macadam road including soiling for pipe line trench work. as directed by the departmental officers.
164
-
-
RBR-FNDN-1- (i-B) - In ordinary soils, by Mechanical means
Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification 304 MORTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Pipe Lines by mechanical means.
19790.19
-
-
BLD-CSTN-2-5 - (13): Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308). Ordinary rock (not requiring blasting)-Mechanical Means-Upto 3 m depth
1236.89
-
-
RBR-FNDN-1- (i-A) In ordinary soils, by Manual means
Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material , dressing of sides and bottom as per Technical Specification 304 MORTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Pipe Lines by manual means.
2473.77
-
-
RBR-FNDN-1- (iv) - In hard rock blasting prohibited: Excavation in Hard rock (blasting prohibited) Upto 3 m depth including 1.5 m depth in hard rock : Earthwork excavation in hard rock such as sheet rock and boulders in habitant areas where conventional blasting can not be done for pipe line trenches, including all incidental and operational charges etc., complete.
1236.89
-
-
Manufacture, supply, delivery of HDPE pipes conforming to IS 4984 - 1995 including transportation to any where in AP, Excise duty, sales tax etc., complete ( Supply upto 90mm dia in coil & above 90mm dia strightin length in 6M) (6 Kg/Sq Cm)
-
-
-
110 mm dia HDPE 6Kg/Cm2 pipe
19433
-
-
160 mm dia HDPE 6Kg/Cm2 pipe
6558
-
-
200 mm dia HDPE 6Kg/Cm2 pipe
2987
-
-
250 mm dia HDPE 6Kg/Cm2 pipe
3053
-
-
315 mm dia HDPE 6Kg/Cm2 pipe
865
-
-
Lowering, laying and jointing of HDPE pipes and jointing by butt fusion welding as per IS 7634-part-II/1975 as amended from time to time to the alignment and gradient and testing the pipeline to required pressure etc.complete as per S.S
-
-
-
110 mm dia HDPE 6Kg/Cm2 pipe
19433
-
-
160 mm dia HDPE 6Kg/Cm2 pipe
6558
-
-
200 mm dia HDPE 6Kg/Cm2 pipe
2987
-
-
250 mm dia HDPE 6Kg/Cm2 pipe
3053
-
-
315 mm dia HDPE 6Kg/Cm2 pipe
865
-
-
Manufacture, supply, & delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to any where in AP, Central excise duty, sale tax etc., complete
-
-
-
Bends
-
-
-
110 mm dia HDPE 6Kg/Cm2 pipe
50
-
-
160 mm dia HDPE 6Kg/Cm2 pipe
15
-
-
200 mm dia HDPE 6Kg/Cm2 pipe
12
-
-
250 mm dia HDPE 6Kg/Cm2 pipe
2
-
-
315 mm dia HDPE 6Kg/Cm2 pipe
3
-
-
End caps
-
-
-
110 mm dia HDPE 6Kg/Cm2 pipe
50
-
-
160 mm dia HDPE 6Kg/Cm2 pipe
15
-
-
200 mm dia HDPE 6Kg/Cm2 pipe
9
-
-
250 mm dia HDPE 6Kg/Cm2 pipe
12
-
-
315 mm dia HDPE 6Kg/Cm2 pipe
3
-
-
Long neck pipe ends
-
-
-
110 mm dia HDPE 6Kg/Cm2 pipe
25
-
-
160 mm dia HDPE 6Kg/Cm2 pipe
10
-
-
200 mm dia HDPE 6Kg/Cm2 pipe
4
-
-
250 mm dia HDPE 6Kg/Cm2 pipe
4
-
-
315 mm dia HDPE 6Kg/Cm2 pipe
2
-
-
MS flanges to suit HDPE pipes
-
-
-
110 mm dia HDPE 6Kg/Cm2 pipe
35
-
-
160 mm dia HDPE 6Kg/Cm2 pipe
12
-
-
200 mm dia HDPE 6Kg/Cm2 pipe
5
-
-
250 mm dia HDPE 6Kg/Cm2 pipe
5
-
-
315 mm dia HDPE 6Kg/Cm2 pipe
2
-
-
Tees
-
-
-
110 mm dia HDPE 6Kg/Cm2 pipe
50
-
-
160 mm dia HDPE 6Kg/Cm2 pipe
15
-
-
200 mm dia HDPE 6Kg/Cm2 pipe
12
-
-
250 mm dia HDPE 6Kg/Cm2 pipe
12
-
-
315 mm dia HDPE 6Kg/Cm2 pipe
3
-
-
Centrifugally cast (spun) Ductile Iron pressure pipes for water, Gas and sewage with socket spigot ends confirming to I.S.: 8329/2000 in standard working lengths of 4,5,5.5 & 6 meterfor classification K7 suitable for push on joint ( Rubber Gasket D jointing) with cement mortar lining inside the pipes with out side Zinc coating. Rates are including Transportationand CED and ST etc,. complete.
-
-
-
350 mm dia DI K7
385
-
-
400 mm dia DI K7
154
-
-
PHE-LCIS-1: Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994)
-
-
-
350 mm dia DI K7
385
-
-
400 mm dia DI K7
154
-
-
PHE-JCIR-4: Jointing the C.I. Pipes, D.I. Pipes & fittings with Rubber Gasket including cost of the gasket, all sundries filling with water with a water lead upto 500 m and testing to required pressure etc., complete as per BIS No.3114/85.
-
-
-
350 mm dia DI K7
84
-
-
400 mm dia DI K7
34
-
-
Manufacture, supply and delivery of centrifugally cast (spun ) ductile iron fittings conforming to IS No. 9523/2000 having dimentions as per table. , zinc coated externally with inside mortor lining (with finishing as per class 13/IS 9523/2000 as per Code No 1 ) including transportation, taxes and duties etc.
3647
-
-
Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG40/SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538.
-
-
-
DI. D/F Sluice valves of PN.16 class
-
-
-
100mm dia Sluice Valves
55.52
-
-
150mm dia Sluice Valves
21.86
-
-
200mm dia Sluice Valves
9.96
-
-
250mm dia Sluice Valves
15.27
-
-
300mm dia Sluice Valves
4.33
-
-
350mm dia Sluice Valves
0.96
-
-
400mm dia Sluice Valves
1
-
-
100mm dia Scour valves
10
-
-
150mm dia Scour valves
8
-
-
200mm dia Scour valves
5
-
-
PHE-CISV-15 : Lowering, keeping in position and fixing D.I. sluice valves (with cap / with hand wheel & reflex valves) including cost of bolts, nuts, rubber insertion, sluice valve and tail pieces
-
-
-
100mm dia Sluice Valves
65.52
-
-
150mm dia Sluice Valves
29.86
-
-
200mm dia Sluice Valves
14.96
-
-
250mm dia Sluice Valves
15.27
-
-
300mm dia Sluice Valves
4.33
-
-
350mm dia Sluice Valves
0.96
-
-
400mm dia Sluice Valves
1
-
-
Manufacture, Supply and Delivery of DI Dismantling joints with both side flange end siutable for installations in between flange end pipes including all taxes etc., Complete.
-
-
-
100mm Dia
55.52
-
-
150mm Dia
21.86
-
-
200mm Dia
9.96
-
-
250mm Dia
15.27
-
-
300mm dia
4.33
-
-
Manufacture, Supply and Delivery of MS Dismantling joints with both side flange end siutable for installations in between flange end pipes including all taxes etc., Complete.
-
-
-
350mm dia
0.96
-
-
400mm Dia
1
-
-
PHE-JCIF-5-: Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)
-
-
-
350mm dia Sluice Valves
3.84
-
-
400mm dia Sluice Valves
4
-
-
Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality.S Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538.
-
-
-
80 mm dia air valve
20
-
-
Labour charges for fixing Kinetic Air Valves Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
-
-
-
80 mm dia air valve
20
-
-
Construction of Valve chambers with Cement Concrete vertical walls and RCC slab fitted with FRC man hole cover and frame, etc including cost and conveyance of all material, labour charges, curing etc., complete as per standard specifications and standard drawings..
-
-
-
For up to 200mm dia Sluice valves and for revamping pipe lines
87.34
-
-
Construction of Valve chambers with Cement Concrete vertical walls and RCC slab fitted with FRC man hole cover and frame, etc including cost and conveyance of all material, labour charges, curing etc., complete as per standard specifications and standard drawings..
-
-
-
for 250mm dia to 350 Sluice valves
20.56
-
-
for 400mm dia to 600 Sluice valves
1
-
-
Carting away the surplus excavated material i.e.Earth and Rubble from the site to a suitable distance of about 10.00 Km including loading, unloading , conveyance charges and dumping the carted material at the contractors cost, labour charges, all leads & lifts and other incidental and operational charges etc., complete.
1236.89
-
-
PHE-CCIP-23: Cutting C.I./ DI / MS Pipes without water in mains where ever required (.Dia of pipes in mm.)
-
-
-
350 mm dia DI K7
12
-
-
400 mm dia DI K7
10
-
-
Manufacture, supply and erection of air valve guard cabins of size 0.90 x 0.90 x 0.90 m made with 4 numbers vertical and 8 numbers horizontal MS angles of size 75 x 75 x 6mm and 10mm dia MS square bars fixed at 7.50cm c/c with door and locking arrangements as per approved drawing and as directed by the departmental officer and painting both sides with anti-corrossive paint two coats over one coat of primary coat including cost of all material, fabrication, welding, transportation etc., complete
20
-
-
Manufacture, supply and delivery of Ductile Iron pipes and fittings (spls.) conforming to IS. No. 7181/1986, 5531/1988, 3950/1979 and CID. joints confirming to IS No.8794/1988 at site of work anywhere in A.P.including, loading, unloading, transportation to site of work stacking at site transit risk and package, excluding taxes and duties.
5535.57
-
-
Collection, supply and filling of stone dust/quarry spall to work site including cost and conveyance of all materials and all labour charges for flling etc., complete.
5921.28
-
-
V.P.C.C. M30 Grade using 20 mm HBG metal exculding the cost of steel in reinforcement, but including centring charges, laying , levelling , machine mixing etc
3355.39
-
-
BILL NO 3.2 Providing 15mm dia House service connection
-
-
-
Providing 15 mm dia House Service Connection as per standard specification including the cost of the materials like Clamp Saddle, Ferrule Tapping Saddle confirming to I.S stadard manufactured from virgin resin of PE-80, Compression Elbows, MDPE PE100 Pipe including lowering, laying and jointing including earth work excavation, UPVC Casing pipe with Two Calmps for drain crossings,Drilling of Holes for RR Masonary and CC Walls, Boring&Tunneling below CC & BT Roads, saw cutting of groves in CC Roads and refilling the pipe line trench after laying the pipe line and including cost of 15mm dia meter of BIS standard etc complete as directed by departmental officer for finished item of work.( CC Roads and BT Roads should not be distrubed).Provide 4.00 mtr length MDPE pipe for House side conncetions and 7.00 mts length MDPE pipe at opposite side to be laid.
-
-
-
Connection at House Side
4250
-
-
Connection at Opposite Side
-
-
-
With CC&BT Road Cutting for Pits
1700
-
-
Earthen Roads
2550
-
-
BILL NO 3.3 Providing "B" Class AMR Ultrasonic Meters
-
-
-
Supply, delivery, installing, satisfactory testing and commissioning of domestic Battery operated electronically compatible AMR Ultrasonic or AMR Electromagnetic Water Meters from 15 mm to 40 mmWater Meters having No moving parts in contact with water with body made up of brass or composite materials confirming to ISO along with manufacturing test certificate and Guarantee certificate with Battery life of min. 10 years with GSM /GPRS/ RF Technology for communication to server with PC Software via handheld reader or directly, including all material required for fixing, labour & giving satisfactory leak proof test etc Complete with poly-propylenemeter box. General Specifications: Meter should be battery operated with no moving parts, low pressure loss. Display: 8 digit LCD, Protection class IP 68 , Operating temperature 10 C to 55 C deg. , Accuracy up to +/- 2% and unaffected by Operating temperature , Pressure : PN 1.6 MPa, power supply : 3.1 to 3.7 VDC lithium battery with minimum life of more than 10 years. Flow Measurement Range 1 to 3000L/H, Warrantyrequired for10years. Memory built-in and should have storage for at least 12 months with daily / monthly accumulated totalised data with time and date should be available. It should be able to access memory of the meter through serial communication. The readings should be obtainable by either walkby or stationery pole with specific range or drive by on Android device. The acceptance / routine tests shall be either conducted by M/s. Fluid Control Research Institute, Palghat, Kerala or any of the Laboratories approved by the National Accreditation Board for calibration Laboratories (NABL) or installation at site etc. complete includingpoly-propylene box for keeping the meter. Including all charges excluding tax.
-
-
-
15 mm House service Connections
8500
-
-
BILL NO 3.4 Supply, deliver and installation of bulk flow meter including consumer meters and other instruments (SCADA) in the deliveries for the DMAs
-
-
-
Electromagnetic Flow Meters:Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
-
-
-
Gandhi Park(Zone-1A, 800 KL, EX. ELSR)
-
-
-
300mm
1
-
-
Gandhi Park (Zone-1B, 800 KL, Prop. ELSR)
-
-
-
300mm
1
-
-
Majjulapeta (Zone-2, 500 KL, ELSR)
-
-
-
300mm
1
-
-
Oriya Panda Veedhi (Zone-3, 800 KL, ELSR)
-
-
-
400mm
1
-
-
Kapu Bodavalasa (Zone-4, 500 KL, ELSR).
-
-
-
300mm
1
-
-
Pressure Transmitter:Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
10
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.
10
-
-
Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer.
-
-
-
300mm
4
-
-
400mm
1
-
-
Chlorine Analyzer:Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years.
1
-
-
Turbidity Analyzer:Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years.
1
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.
1
-
-
Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations where ever necessary. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
1
-
-
Pressure Reducing Valves:Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior.
-
-
-
Gandhi Park(Zone-1A, 800 KL, EX. ELSR)
-
-
-
100mm
3
-
-
150mm
2
-
-
200mm
1
-
-
Gandhi Park (Zone-1B, 800 KL, Prop. ELSR)
-
-
-
100mm
3
-
-
150mm
2
-
-
200mm
1
-
-
Majjulapeta (Zone-2, 500 KL, ELSR)
-
-
-
100mm
3
-
-
150mm
2
-
-
200mm
1
-
-
Oriya Panda Veedhi (Zone-3, 800 KL, ELSR)
-
-
-
100mm
3
-
-
150mm
2
-
-
200mm
1
-
-
Kapu Bodavalasa (Zone-4, 500 KL, ELSR).
-
-
-
100mm
3
-
-
150mm
2
-
-
200mm
1
-
-
Handheld Devices:Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years.
16
-
-
Control Centre
-
-
-
Meter Intergations with server
1
-
-
Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers.
1
-
-
Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years
1
-
-
Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer.
1
-
-
Printer - 3 in one on color printer with refillable ink bank
1
-
-
Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
1
-
-
BILL NO 3.5 Providing for Implementation of Environmental Management Plan(EMP) in the estimate for Salur Municipality.
-
-
-
I. Monitoring Costs : Construction Phase (Two years)
-
-
-
Air Quality Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines
20
-
-
Noise level Monitoring ( 5 Monitoring station) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines
20
-
-
Water Quality Monitoring surface / ground (6 Monitoring station) once in a month for three seasons during the construction period at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines
25
-
-
II. Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5).with tree guard
80
-
-
III. Sprinkling of water with 5000 Litres capacity tankers once in a day for 600 days (excluding rainy days)
350
-
-
BILL NO 3.6 OPEX (O&M) Operation & Maintance cost for seven years including two years defect liablity period but excluding power charges
-
-
-
Personal required for operating Valves in distribution lines
-
-
-
Fitter
99
-
-
Turn Cock
132
-
-
Helpers for Distribution
198
-
-
Repairs to pumpsets & Water pipe lines
(for Five years)
-
-
-
i) Replacement of glands of sluice valves
94
-
-
iii) Grease
23
-
-
iv) Gland Packing
16
-
-
LEAKAGES
-
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged DI Pipe for 2 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
350 mm DI Pipes
2
-
-
300 mm DI Pipes
2
-
-
Earth work Excavation,Bailing out water from Pipe Line Trench and replacement damaged HDPE Pipe for 1 M length including the Cost of Pipe Collar M/F Joint and refilling etc complete
-
-
-
250 mm HDPE Pipes
5
-
-
200 mm HDPE Pipes
10
-
-
160 mm HDPE Pipes
25
-
-
110 mm HDPE Pipes
40
-
-
Providing qualified Diploma with minimum 2 Years of experience in SCADA / Computers, flow meters and instruments maintainence etc including daily routine checks on HMI, Flowmeter, PLC at all locations around the project and also operate (2 techinican x 366 days x 7 years = 5124 days ) inc ESI, PF and other statutory levies as directed by the departmental officers
5124
-
-
Service Charge for bill generations, collections and maintainence for 9500 consumers x 12 months x 7 years = 798000. This item includes cost of consumables.
798000
-
-
Operation phase: Air Quality Monitoring ( 5 Monitoring stations) twice in a year at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines.
10
-
-
Noise level Monitoring ( 5 Monitoring stations) twice in a year at at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines.
10
-
-
Water Quality Monitoring ( 5 Monitoring Locations) twice in a year at Intake well, GLBR,WTP, ELSRs & Raw & clear water pipe lines.
14
-
-
4) Nellimarla Nagar Panchayat:
-
-
-
Bill No : 4.1 Providing of Distribution system for Zone - I to VII including Road Restoration.
-
-
-
Cutting BT road surface as well as asphalt (75mm thick) including water bound. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
2240
-
-
Cutting the CC road surface. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
920
-
-
Cutting the open water bound macadam. The rate including labour charges for cutting, incidental charges etc., complete as directed by the departmental officer in charge of the work.
4430
-
-
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches by Manual Means
11220
-
-
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH for pipe line trenches by Mechanical Means
26180
-
-
Supply and filling with Sand complying with standard specifications including cost and conveyance of sand to site to work labour charges watering tamping, ramming etc complete and as directed by the Engineer-in-Charge of the work and as per Technical Specification
2970
-
-
Supply and Delivery of HDPE PE-100 6 KSC Pipes conforming to IS 4984 - 1995 including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification
-
-
-
110 OD HDPE Pipes
24459
-
-
160 OD HDPE Pipes
8336
-
-
200 OD HDPE Pipes
5707
-
-
250 OD HDPE Pipes
3752
-
-
315 OD HDPE Pipes
1244
-
-
Jointing CI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete and as per Technical Specification
-
-
-
80 mm Dia
45
-
-
110 mm Dia
297
-
-
150 mm Dia
185
-
-
200 mm dia
96
-
-
250 mm dia
98
-
-
300mm dia
44
-
-
Supply and Delivery of HDPE PE-100 6 KSC Pipes conforming to IS 4984 - 1995 including cost and transportation to site of work and stacking as per standards including all taxes and duties but excluding GST and as per the Technical Specification
-
-
-
Pipe ends - long neck
-
-
-
110mm dia.
100
-
-
160mm dia.
62
-
-
160 mm dia for Air TEEs
36
-
-
200mm dia.
24
-
-
200 mm dia for Air TEEs
24
-
-
250mm dia.
24
-
-
250 mm dia for Air TEEs
22
-
-
250 mm dia for bulk flow meter
6
-
-
315mm OD
10
-
-
315 mm dia for Air TEEs
8
-
-
350 mm dia for bulk flow meter
8
-
-
b) MS Flanges
-
-
-
110mm dia.
100
-
-
160mm dia.
62
-
-
160 mm dia for Air TEEs
36
-
-
200mm dia.
24
-
-
200 mm dia for Air TEEs
24
-
-
250mm dia.
24
-
-
250 mm dia for Air TEEs
22
-
-
250 mm dia for bulk flow meter
6
-
-
315 mm dia.
10
-
-
315 mm dia for Air TEEs
8
-
-
315 mm dia for bulk flow meter
8
-
-
End Caps
-
-
-
110mm dia.
14
-
-
160mm dia.
4
-
-
200mm dia.
2
-
-
Reducers
-
-
-
110X125 mm dia
66
-
-
125x140 mm dia
44
-
-
140x160 mm dia
44
-
-
160x180 mm dia
28
-
-
180x200 mm dia
28
-
-
200x225 mm dia
26
-
-
225x250 mm dia
24
-
-
250x280 mm dia
14
-
-
280x315 mm dia
12
-
-
TEES
-
-
-
110mm dia.
104
-
-
160mm dia.
35
-
-
200mm dia.
25
-
-
250mm dia.
19
-
-
315mm OD
7
-
-
Bends
-
-
-
110mm dia.
50
-
-
160mm dia.
18
-
-
200mm dia.
13
-
-
250mm dia.
12
-
-
315mm OD
5
-
-
Lowering, Laying and jointing of HDPE pipes by butt fusion welding as per IS:7634 – part-II/1975 as amended from time to time true to the alignment and gradient and testing the pipeline to the required testing pressure and as per the Technical Specification.
-
-
-
110mm dia.
24459
-
-
160mm dia.
8336
-
-
200mm dia.
5707
-
-
250mm dia.
3752
-
-
315mm OD
1244
-
-
Supply and Delivery of Centrifugally Cast (Spun) Ductile Iron Fittings conforming to IS: 9523/2000 Zinc Coated Externally with Inside Mortar Lining (With Finishing as per class 13/Is 9523/2000) including Transportation, Taxes and Duties but excluding GST and as per Technical Specification
-
-
-
100X2.00m on 110 dia mains for scours
22
-
-
100X2.00m on 160 dia mains for scours
14
-
-
100x1.00m long DF pipes for sluice valves
100
-
-
150X2.00m on 200 mm dia mains for scours
4
-
-
150x1.00m long DF pipes for sluice valves
34
-
-
200x1.00m long DF pipes for sluice valves
24
-
-
250x1.00m long DF pipes for sluice valves
24
-
-
250x1.00m long DF pipes for bulk flow meter
6
-
-
300x1.00m long DF pipes for sluice valves
10
-
-
300x1.00m long DF pipes for bulk flow meter
8
-
-
Supply and delivery of PN 1.6 D.I D/F "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) confirming to IS 14846 latest amendment and Material of Construction (as per latest codes) as per Technical Specification of the Tender Document including cost and conveyance and stacking as per standards and as directed by Engineer-in-charge
-
-
-
100mm dia for distrubution
50
-
-
150mm dia for distrubution
17
-
-
200mm dia for distrubution
12
-
-
250mm dia for distrubution
12
-
-
300mm dia for distrubution
5
-
-
for scour
-
-
-
100mm dia on 110 mm dia mains
11
-
-
100mm dia on 160 mm dia mains
7
-
-
150 mm dia on 200 mm dia lines
2
-
-
Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. PN16
-
-
-
80 mm dia on 160 mm pipe
18
-
-
80 mm dia on 200 mm pipe
12
-
-
80mm dia 250 mm pipe
11
-
-
80mm dia 315 mm pipe
4
-
-
Labour charges for lowering and keeping in position of D.I. Sluice valves, reflux valves and scour valves as directed by Engineer-in-charge
-
-
-
100mm dia for distrubution
50
-
-
150mm dia for distrubution
17
-
-
200mm dia for distrubution
12
-
-
250mm dia for distrubution
12
-
-
300mm dia for distrubution
5
-
-
350 mm dia for bulk flow meter
4
-
-
for scour
-
-
-
100mm dia on 110 mm dia mains
11
-
-
100mm dia on 160 mm dia mains
7
-
-
150 mm dia on 200 mm dia lines
2
-
-
Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., completeas directed by Engineer-in-charge
-
-
-
80 mm dia on 150,250,315,355 mm pipes
45
-
-
Construction of sluice and scour Valve Chamber as per type design drawing with CC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work
-
-
-
100mm dia for distrubution
50
-
-
150mm dia for distrubution
17
-
-
200mm dia for distrubution
12
-
-
250mm dia for distrubution
12
-
-
300mm dia for distrubution
5
-
-
for scour
-
-
-
100mm dia on 110 mm dia mains
11
-
-
100mm dia on 160 mm dia mains
7
-
-
150 mm dia on 200 mm dia lines
2
-
-
Construction of Air Valve Chamber as per type design drawing with RCC including, plastering, RCC cover slabs etc. including cost and conveyance of all material and all labour charges etc. complete as per S.S for finished item of work
-
-
-
80 mm dia on 160 mm pipe
18
-
-
80 mm dia on 200 mm pipe
12
-
-
80mm dia 250 mm pipe
11
-
-
80mm dia 315 mm pipe
4
-
-
Lowering the C.I. Pipes, D.I. Pipes of all classes and fittings with flanged ends carefully into the trenches and laying them true to alignment and gradient including all sundries, but excluding conveyance from source of supply as per BIS No.3114/94.
-
-
-
100 mm
190
-
-
150 mm
62
-
-
200 mm
36
-
-
250 mm
41
-
-
300 mm
22
-
-
Filling crushur stone dust in pipe line trenches as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH
3915
-
-
Vibrated plain Cement concrete(VPCC) nominal mix M-30 (Cement : fine aggregate: coarse aggregate ) using 20mm size Hard Granite Machine Crushed Graded Metal including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nomonal reinforcement for Road restoration. for BT&CC roads
2218
-
-
Bill No: 4.2 Providing 15mm dia New House service connections Service connections totalling 4552 Nos. HSCs.
-
-
-
Providing House service connections on HDPE mains a) 1 No.of MDPE PE 80 blue/PE100 black Electro Fusion Tapping Saddle (Flexifit-Top loading type with load bearing capacity of 1500N) Electro Fusion Tapping Saddle shall comply with BS EN 12201-3:2011, PN-12.5/PN-16 Rating and manufactured from virgin resin of PE-80/PE-100 having blue/black colour. Raw material must be WRAS Approved as per BS 6920 for effect on water quality intended for human consumption.
b) 1 No. of regulating brass ferrule as per IS 2692
c) 2 No. of compression adaptor with one side compression end to suit ½” (20mm OD )MDPE pipe and other side with female threaded off-take with SS-304 material inserts of sizes ½” BSP threads, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
d) 2 No. of Double compression elbow to suit ½” (20mm OD )MDPE pipe, Body , Nut and cap of Polypropylene , Clip ring of POM(Acetylic resin) and “O” ring of NBR material, as per ISO 17885 Standards with pressure rating PN 16.
e)MDPE PE80 Blue Pipe of specified length as per ISO 4427 Rev 1. For conveyance of potable water .The pressure rating of ½” (20mm OD) will be PN16. Certificate for compliance of testing these fittings and pipe as per BS-6920 by designated laboratories to be produced.
f) CP bibcock
g) Geotagging of the HSC
h) drilling of hoe in RCC / RR in compound wall i) holder clamps where ever required
j) UPVC pipe for drain crossing
-
-
-
Providing house service connections at house holds side in earthern roads (Minimum 4.0 Mts MDPE pipe)
540
-
-
Providing house service connections at other side in earthern roads ((Minimum 7.0 Mts MDPE pipe)
540
-
-
Providing house service connections at other side in BT &CC roads (Minimum 4.0 Mts MDPE pipe)
1260
-
-
Providing house service connections at HH side in BT &CC roads (Minimum 7.0 Mts MDPE pipe)
1260
-
-
Bill No: 4.3 Providing "B" Class AMR Ultrasonic Meters
-
-
-
Supply, delivery, installing, satisfactory testing and commissioning of domestic Battery operated electronically compatible AMR Ultrasonic or AMR Electromagnetic Water Meters from 15 mm to 40 mmWater Meters having No moving parts in contact with water with body made up of brass or composite materials confirming to ISO along with manufacturing test certificate and Guarantee certificate with Battery life of min. 10 years with GSM /GPRS/ RF Technology for communication to server with PC Software via handheld reader or directly, including all material required for fixing, labour & giving satisfactory leak proof test etc Complete with poly-propylenemeter box. General Specifications: Meter should be battery operated with no moving parts, low pressure loss. Display: 8 digit LCD, Protection class IP 68 , Operating temperature 10 C to 55 C deg. , Accuracy up to +/- 2% and unaffected by Operating temperature , Pressure : PN 1.6 MPa, power supply : 3.1 to 3.7 VDC lithium battery with minimum life of more than 10 years. Flow Measurement Range 1 to 3000L/H, Warrantyrequired for10years. Memory built-in and should have storage for at least 12 months with daily / monthly accumulated totalised data with time and date should be available. It should be able to access memory of the meter through serial communication. The readings should be obtainable by either walkby or stationery pole with specific range or drive by on Android device. The acceptance / routine tests shall be either conducted by M/s. Fluid Control Research Institute, Palghat, Kerala or any of the Laboratories approved by the National Accreditation Board for calibration Laboratories (NABL) or installation at site etc. complete includingpoly-propylene box for keeping the meter. Including all charges excluding tax.
-
-
-
15 mm House service Connections
3600
-
-
Bill No: 4.4 Supply, deliver and installation of bulk flow meter including consumer meters and other instruments in the deliveries for the DMAs of NELLIMARALA NAGAR PANCHAYATH
-
-
-
Electromagnetic Flow Meters:Supply, delivery, installation and integration of Electromagnetic flow meter with IP68 and as per ISO 9001:2008,meter tube should be SS304 material, CS flanges of PN10/PN16 rating liner - hard rubber/polyurethane with WRAS or NSF drinking water approval, electrodes - SS316, 2 measuring electrodes for measuring,1 ground elctrode,1 empty pipe detection, coil housing - SS304 fully welded construction for corrosion grade/painted steel with protective lacquering (corrosive protection, class up to C5-1) as per EN ISO-12944/carbon steel, IP68 protection, Accuracy +/- 0.5% of measured value inclusive of linearity, repeatability etc, grounding rings of SS316/304. Flow transmitter microprocessor based wall mounted, flow ranges of the meter (full flow range). The overall uncertainty of the calibration rig should be atleast three times better than the uncertainty of the full bore electromagnetic flow meter. The competent government authority such as FCRI/NABL must certify the test facility etc. The EMF must be integrated with local SCADA server and the reading shall be captured all times 24x7. The flowmeter values must be persistent and there is no loss of data. The meter shall have display panel for displaying the readings according. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
-
-
-
Zone-I DMA ( Jarajupeta High school Ground , 500 KL , Proposed ELSR ) Inlet 300 mm Ø
-
-
-
300 mm
1
-
-
Zone-II DMA ( Jarajupeta Panchayat Office , 200 KL , Existing ELSR ) Inlet 250 mm Ø
-
-
-
250 mm
1
-
-
Zone-III DMA ( Gandhi Nagar , 200 KL , Existing ELSR) Inlet 250 mm Ø
-
-
-
250 mm
1
-
-
Zone-IV DMA ( Kondapeta , 300 KL , Proposed ELSR,) Inlet 300 mm Ø
-
-
-
300 mm
1
-
-
Zone-V DMA ( Saali Veedi , 120 KL , Existing GLSR,) Inlet 150 mm Ø
-
-
-
150 mm
1
-
-
Zone-VI DMA ( Nagarpanchayat Office , 130 KL ) , Existing GLSR, Inlet 200 mm Ø
-
-
-
200 mm
1
-
-
Zone-VI DMA ( Naidu Colony , 400 KL , Existing GLSR,) Inlet 300 mm Ø
-
-
-
300 mm
1
-
-
Zone-VII DMA ( Chandra babu Naidu Colony , 300 KL , Proposed ELSR,) Inlet 200 mm Ø
-
-
-
200 mm
1
-
-
Pressure Transmitter
-
-
-
Supply, delivery , installation of pressure transmitter with a pressure range of up to 16 bar and 64 bar for appropriate usages. Output: 4 to 20 mA, permissible temperature: -20°C to +70°C, IP65 rated with local display. For This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
16
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.
16
-
-
Construction of CC masonry chambers with a openable MS hatch, with lock and key arrangement, steps arrangement, for Electromagnetic Flow meters, Butterfly valves as per pipe sizes including cost of cement, sand, bricks and other required material, including painting and suitable painting material, including labour charges. , Excavation and including wages. Complete as directed by the departmental officer.
-
-
-
150 mm
1
-
-
200 mm
2
-
-
250 mm
2
-
-
300 mm
3
-
-
Chlorine Analyzer:Supply, installation , delivery and testing wall mounted ABS plastic enclosure based Online Chlorine Analyzer of Amphreometric or Potentiometric type. Specifications of Range: 0 to 5 mg/L free or total residual chlorine, Resolution 0.01 PPM, Accuracy: +/- 0.05 PPM or better, Cycle Time: 4 minutes, Inlet: Sample Temperature: 5 to 40 °C, operating Temperature: Range 5 to 60 °C. Local LCD Display to display the values. Output: 4-20 mA or 0-10 VDC to integrate into PLC if needed. PH Compensation must be Auto/Manual. All accessories that are required for the must be provided.This item shall include the cost of consumables for the defect liability period of 2 years.
1
-
-
Turbidity Analyzer:Supply, installation , delivery and testing of wall mounted Turbidity Analyzer make of HACH/ ABB/ Forbes Marshall with specifications of Range 0.00-500.0(NTU/FNU), Operating Temperature : 0 – 60 °C, Displayed Resolution : 0.01 (0.00-19.99), 0.1(20.0-500.0)NTU/FNU, Response Time : Initial response in 1 minute, 15 seconds for a full-scale step change Signal, Sample, Temperature : 0 to 50°C (32 to 122°F), Output 4-20mA to integrate into PLC if needed. Local LCD Display to display the values . This item includes the cost of consumables for the defect liability period of 2 years.
1
-
-
Supply, delivery , installation of Data Logger with solar powered , battery backup of 5 days including SIM charges for 7 years, transmission rate shall be every 10 minutes cycle that can be configurable from 2 minutes upto 8 hours as needed.This unit shall have additional battery pack to power up ( 5 days backup) for the instruments connected to this item . The data collected from the instruments such as the bulk flow meter , preassure sensors , chlorine etc must be transmitted to the central SCADA Servers via the restfull web services hosted by the servers in the requred data format.
1
-
-
Supply delivery and installation of Protection MS grills with lock and key for equipment, instrumentations where ever necessary. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
1
-
-
Pressure Reducing Valves:Supply , Delivery and installation of manually adjusted preassure reducing valves , accurate pressure ratings. Maximum Upstream Pressure : 20 bar ; Maximum Working Temperature : 80°C. These PRV must be installed at key inlets points of the service reservior.
-
-
-
Zone-I DMA ( Jarajupeta High school Ground , 500 KL , Proposed ELSR) Inlet 300 mm Ø
-
-
-
100 mm
2
-
-
150 mm
1
-
-
Zone-II DMA ( Jarajupeta Panchayat Office , 200 KL , Existing ELSR) Inlet 250 mm Ø
-
-
-
100 mm
2
-
-
150 mm
1
-
-
200 mm
1
-
-
Zone-III DMA ( Gandhi Nagar , 200 KL , Existing ELSR) Inlet 250 mm Ø
-
-
-
100 mm
2
-
-
150 mm
1
-
-
200 mm
1
-
-
Zone-IV DMA ( Kondapeta , 300 KL , Proposed ELSR) Inlet 300 mm Ø
-
-
-
100 mm
2
-
-
150 mm
1
-
-
200 mm
1
-
-
Zone-V DMA ( Saali Veedi , 120 KL , Existing GLSR,) Inlet 150 mm Ø
-
-
-
100 mm
2
-
-
150 mm
1
-
-
Zone-VI DMA ( Nagarpanchayat Office , 130 KL , Existing GLSR) Inlet 200 mm Ø
-
-
-
100 mm
2
-
-
150 mm
1
-
-
Zone-VI DMA ( Naidu Colony , 400 KL , Existing GLSR) Inlet 300 mm Ø
-
-
-
100 mm
2
-
-
150 mm
1
-
-
200 mm
1
-
-
Zone-VII DMA ( Chandra babu Naidu Colony , 300 KL , Proposed ELSR) Inlet 200 mm Ø
-
-
-
100 mm
2
-
-
150 mm
1
-
-
Handheld Devices:Supply delivery and comissioning the Handheld Devices for meter reading and bill printing. The power back up of this item shall be for 24 hours , android based with on line and offline capabilities, portable credit/debit card machine reader integrated. The connectivity to the central server will be via rest full services with highest security standards , in json data format as directed by the departmental offer. The bill generation , collection shall reflect across the entire system and the acknoledgement of the receipt shall be sent by SMS to the consumer. SIM charges for 7 years shall be provided. This item shall include the cost of consumables for the defect liability period of 2 years.
5
-
-
Control Centre
-
-
-
Meter Intergations with server
1
-
-
Supply, testing installation and commissioning of command control: Reputed / Branded Hardware servers (2 nos) with 8GB RAM and 1TB Hard Disk including for operating system server license CentOS/Lunix , Windows OS, key board mouse with 20" LED monitor, Routers, firewall, bill printer , as required for running the software and internet broad band connection with static IP for for 84 months . 2 nos desktop with windows operating system with 8GB RAM and 1TB Hardisk, key board mouse and 20" LED monitor , 3 Nos work station with 3 chairs for each work station , racks for servers , network wiring , power wiring , etc . This item shall, including cost, conveyance , warrenty for 2 years , complete as directed by the departmental officers.
1
-
-
Supply, testing and commissioning of 55" LED monitor with Ethernet/HDMI/VGA/WIFI with waranty for 2 years
1
-
-
Software shall have modules such as Consumer master , grievence , billing , reports , SMS integration , Access log module, online payment module , consumer logins , metering details , dash board , with authentication and authorisation module , issue tracker , accounting and finance module. The soft ware shall expose restfull web services for further/future integrations with other software. The database, web-server shall be open source, license free, portable with all internationally accepted security standards. Authorisation and user access control shall be implemented for the applications mentioned. The application/software shall provide Restful Web Service interface with JSON data format so that it can be integrated to other centralised software and the Android application. All the data received from the instruments and meters shall be stored in database for a period of 4 years and reports shall be retrieved on demand. The data shall be integrated to the SCADA server as directed by the deparmental officer.
1
-
-
Printer - 3 in one on color printer with refillable ink bank
1
-
-
Supply, Delivery and Installation of 1600VA UPS with solar panels, battery enclosures with doors along with racks, to provide 40 hours battery backup calculated at 50% load. The solar panels should to charge the battery to full capacity in 7 hours of sunshine. As per relevant specification amended time to time for single phase input with input circuit breakers provided protection, sine wave from with sealed battery, maintenance free, recharge time conform to standards. The Batteries shall be of VLRA Type. This item shall, including cost, conveyance, etc complete as directed by the departmental officers.
1
-
-
Bill No: 4.5 Providing for Implementation of Environmental Management Plan (EMP)in the estimate for Nellimarla Nagara Panchaayth.
-
-
-
Monitoring Costs : Construction Phase (Two years)
-
-
-
Air Quality Monitoring ( 4 Monitoring stations) once in a month for three seasons during the construction period at Infiltration Gallaries, ELSRs & clear water pipe lines and Distribution Network
21
-
-
Noise level Monitoring ( 4 Monitoring stations) once in a month for three seasons during the construction period at Infiltration Gallaries, ELSRs & clear water pipe lines and Distribution Network
21
-
-
Water Quality Monitoring surface / ground ( 4 Monitoring stations) once in a month for three seasons during the construction period at Infiltration Gallaries, ELSRs & clear water pipe lines and Distribution Network
33
-
-
Compensatory plantation and three years maintenance (Compensatory afforestation ratio is 1:5).with tree guard
90
-
-
Sprinkling of water once in a day for two years (excluding rainy days) 500 days
500
-
-
Greenbelt development and maintenance in the surroundings / Buffer zone
-
-
-
Health checkups and free medical distribution
1
-
-
Awareness program/training
1
-
-
Bill No: 4.6. OPEX(O&M)Manning, Operation and Maintenance of Nellimerla Nagar Panchayath Water Supply Improvement Scheme for 7 years -distrubution
-
-
-
Personal required for ELSR sites/ Gravity Mains/ Pumping Mains
-
-
-
Fitters- Gravity Main(distrubition)(1 nos x12 monthsx5years)
60
-
-
Personal required for operating Valves in distribution lines
-
-
-
Valve Operator/Turn Cocks
84
-
-
Helpers for Distribution
168
-
-
Repairs to pumpsets & Water pipe lines ( for Five years )
-
-
-
Replacement of glands of sluice valves
10
-
-
Replacements of balls of Air valves
10
-
-
Providing qualified Diploma with minimum 2 Years of experience in SCADA / Computers, flow meters and instruments maintainence etc including daily routine checks on HMI, Flowmeter, PLC at all locations around the project and also operate (1 techinican x 366 days x 7 years = 2562 days ) inc ESI, PF and other statutory levies as directed by the departmental officers
2562
-
-
Service Charge for bill generations , collections and maintainence for 4550 consumers x 12 months x 7 years = 382200. This item includes cost of consumables .
382200
-
-
Monitoring Costs: Operation Phase (One Year)
-
-
-
Air Quality Monitoring (4 Monitoring stations) twice in a year at distribution network and as per Technical Specification
21
-
-
Noise Level Monotoring (4 Monitoring stations) twice in a year at distribution network and as per Technical Specification
21
-
-
Water Quality Monotoring (4 Monitoring stations) twice in a year at distribution network and as per Technical Specification
33
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements