Jawaharlal Nehru Technological University Tender

Rennovation of Science block in JNTUA CEA;Plastering 12 mm thick in two coats with base coat of 8 mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, Including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for Internal & even Surfaces of Brick Wall for finished item of work. (SS 901,903 & 904)but Excluding seigniorage charges for First floor

Rennovation of Science block in JNTUA CEA;Ornamental Ceiling plastering to ceiling 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, Including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for finished item of work. (SS 901,903 & 904) Excluding seigniorage charges. Ground floor.

Rennovation of Science block in JNTUA CEA;Ornamental Ceiling plastering to ceiling 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, Including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for finished item of work. (SS 901,903 & 904) Excluding seigniorage charges. First floor.

Rennovation of Science block in JNTUA CEA;Supply and fixing 2nd class Teak Wood framed and flush door shutter paneled door as per approved drawings with best quality 2nd class teakwood frame of size 150x125mm and panel shutters frames, Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 40 mmthick conforming to IS:2202 including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost ofAluminum Fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm per each shutter, 2 No Aluminum tower bolt of 250x12mm dia, 2 No. Aluminum Aldrops - 250mm long and 2 Nos. Aluminum handles of 150 mm size both front and back to each shutter & 1 No. 63 mm long door stopper to each shutter including fixing the fixtures to door with required no. of brass screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002

Rennovation of Science block in JNTUA CEA;Supply and fixing 2nd class Teak Wood framed and flush door shutter paneled door as per approved drawings with best quality 2nd class teakwood frame of size 100x75mm and panel shutters frames, styles of size 80 x 35 mm thick 2nd class teak wood planks of 30 mm thick per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost ofAluminum Fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm per each shutter, 2 No Aluminum tower bolt of 250x12mm dia, 2 No. Aluminum Aldrops - 250mm long and 2 Nos. Aluminum handles of 150 mm size both front and back to each shutter & 1 No. 63 mm long door stopper to each shutter including fixing the fixtures to door with required no. of brass screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002

Rennovation of Science block in JNTUA CEA;Painting to wood work with 2 coats of ready mixed Synthetic enamel paint of approved brand in all to give an even shade after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to work site and all operation incidental, labour charges etc., complete for finished item of work as directed at all heights.

Rennovation of Science block in JNTUA CEA;Painting to iron work with 2 coats of ready mixed Synthetic enamel paint of approved brand and shade after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to work site and all operation incidental, labour charges etc., complete for finished item of work as directed at all heights.

Rennovation of Science block in JNTUA CEA;Removing white wash or colour wash by steel wire brushing and or scraping ; sand papering and preparing the WALL and or sloping roof surface smooth including necessary repairs to scratches complete.

Rennovation of Science block in JNTUA CEA;Painting to old walls with 2 coats of Emulsion paint of approved brand and shade to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912) in All Floors. Internal Walls.

Rennovation of Science block in JNTUA CEA;Painting to old walls with 2 coats of Emulsion paint of superior quality of approved brand and shade to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912) in All Floors External Walls

Rennovation of Science block in JNTUA CEA;Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing rame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Three track two panels sliding window made of (small series)frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead ofappropriate dimension.(Area of window upto 1.75 sqm)

Rennovation of Science block in JNTUA CEA;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per India Gypsum Ltd specification

Rennovation of Science block in JNTUA CEA;Flooring with non-skid ceramic tiles of 1st quality of all shade and 300mmx300mm sizes, not less than 7-8 mm thick set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab the rate is befour laying size and shade should be got approvel from the Engineer-in-charge.The rate is including cost and conveyance of Providing and fixing flooring with full depth jointing and pointing to the Vitrified/ Ceramic Tile flooring in specified thick for tiles of any sizes with epoxy emulsion grout/synthetic / resin adhesive in width of 3-5 mm with Nylon spacers excluding cost of tiles.all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) cost of seigniorage charges on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No.707 & 701)

Rennovation of Science block in JNTUA CEA;Dadooing to walls with Glazed Tiles of 1st quality and premium variety and colour as approved by Engineer, 7 mm thick of size not less than 200 mm x 300mm as per the design and pattern approved by the architect of approved colour, shade and make set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, cost of seigniorage on materials and all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.

Rennovation of Science block in JNTUA CEA;Supply and Fixing WPVC Door Shutter 25 mm thick and fixtures Ms hinges 3No Handel 2No, Tower Bolts 1No, Aldop 1no, including Labour charges for fixing door shutters of any thickness to the existing door frame including fixing the fixtures to the door shutter excluding cost of shutter.(0.60X2.00)

Rennovation of Science block in JNTUA CEA;Supply and Fixing WPVC Door Fram of size 75mmx50m mm including Labour charges for fixing door Fram including fixing complet fineshed item of work.

Rennovation of Science block in JNTUA CEA;Providing Mild Tubes& pipes of all diameters (as per IS 1161) of different diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work. (APSS No.126) in all floors.

Rennovation of Science block in JNTUA CEA;Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

Rennovation of Science block in JNTUA CEA;Flooring with Double charged/multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm of thick set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with epoxy emulsion grout/ synthetic / resin adhesive in width of 3-5 mm with Nylon spacers excluding cost of tiles.to match the shade of tiles over a bed of C.C. or R.C.C. slab the rate is befour laying size and shade should be got approvel from the Engineer-in-charge.The rate is including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed) cost of seigniorage charges on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No.707 & 701)

Rennovation of Science block in JNTUA CEA;Supply & fixing of European type first quality box colset integral with P or S type vitreous trap, including 10 litres capacity low level PVC flushing cisrtern of pary ware slimlinge make and colour conforming to IS 7231 with all internal fittings, CI brackets, 32mm dia CP flush pipe, 15mm dia 450mm long PVC connector, 15mm dia CP brass stop cock 300 grams, all fixtures of ISI mark, cutting & making good the walls and floors wherever required including cost & conveyance of all materials to work site, all labour charges for all operations for fixing etrc; complete including providing white frame and inged cover to the commode etc; as directed by Engieer- in- charge (Neycer/Parryware/Hindustan) during execution etc; complete for finished item of work.

Rennovation of Science block in JNTUA CEA;Supply & fixing Indian make Flat Bach Wash Hand Basin (HSW/Parryware/Neycer) 1st qualityy conforming to IS:2556-Part-4:1972 withy waste fittings like rubber plug, chain, 32mm nominal size CP Fiting with parallel pipe thread conforming to IS:2963-1979 and firtted with 15mm nominal bore chromimum plated pillar Tap of 1st quyality Indin make 400grams Seiko.Senior/Nice/Esso or equivalent complete with standard CI brackets Pedastalk for wash hand basin and brass stop cock including wooden block 630x450mm - single C.P. Pillar Cock

Rennovation of Science block in JNTUA CEA;Supply & fixing 4'' (101.6 mm ) Nahany Trap ( without inlet with out Jali)UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) complete including cost of cutting & making good the walls and floors etc as directed by Engineer-in-charge including cost & conveyance of all materials to work site, all labour charges for fixing etc; complete for finished item of work.

Rennovation of Science block in JNTUA CEA;Supply&fixing CP long body bib cock fancy tye deluxe 400grams 12.7mm dia Indian make Seiko/Senior/Nice or equivalents complete for fi8nished item of work as per standard specification

Rennovation of Science block in JNTUA CEA;Provinding and fixing of TV shape mirror with plastic frame size 609.6mmx457.2mm including labour charges etc; complete finished item of work.

Rennovation of Science block in JNTUA CEA;Supply And fixing of 75 mm dia PVC/SWR pipe 6Kgs/cm2

Rennovation of Science block in JNTUA CEA;Supply And fixing of 110 mm dia PVC/SWR pipe 6Kgs/cm2

Rennovation of Science block in JNTUA CEA;Supplying & fixing of CPVC Pipes and fitting to meet the requirement of ASTM-D 2846 and produced in CTS (copper tube size 1/2'' ton 2'' SDR 11 and SDR 13.5 pipes are made from identil CPVC compounds having the same physical properties for hot and cold water IS 1577:2007) of ashirvad /ajay flowguard. 22.20mm dia

Rennovation of Science block in JNTUA CEA;Supplying & fixing of CPVC Pipes and fitting to meet the requirement of ASTM-D 2846 and produced in CTS (copper tube size 1/2'' ton 2'' SDR 11 and SDR 13.5 pipes are made from identil CPVC compounds having the same physical properties for hot and cold water IS 1577:2007) of ashirvad /ajay flowguard. 28.60mm dia

Rennovation of Science block in JNTUA CEA;Supplying & fixing of CPVC Pipes and fitting to meet the requirement of ASTM-D 2846 and produced in CTS (copper tube size 1/2'' ton 2'' SDR 11 and SDR 13.5 pipes are made from identil CPVC compounds having the same physical properties for hot and cold water IS 1577:2007) of ashirvad /ajay flowguard. 34.90mm dia

Rennovation of Science block in JNTUA CEA;Supply And fixing of 160 mm dia PVC/SWR pipe

Rennovation of Science block in JNTUA CEA;Supply And fixing of 90 mm dia PVC/SWR pipe

Rennovation of Science block in JNTUA CEA;SPECIALISED FIVE LAYER SYSTEM OF WATERPROOFING TREATMENT TO THE TERRACE WITH MIXGUARD HR5 System .Providing and laying five layers waterproofing cum heat reflective treatment (MIXGUARD HR5 or equivalent) over the old / new roof slab/ terrace, all as directed by Department Engineer-in-charge with the following specification and should be complain with the following technical parameters for the system - Density: 1.3 Gm/cc, Solids content: 68% ± 2% by weight, Elongation at break ASTM D 638: 200% (for the system), Adhesion to substrate ASTM D 4541: >1.5 N/mm2, Water penetration DIN 1048: no leak at 7 bars, Tear resistance ASTM D 1004-76: 17N/mm2, Tensile strength ASTM D 412-87:6.0N/mm2 a ) First Layer - Supply and Apply penetrative cum bonding primer as base primer cum sealer coat using MIXPRIME AC100 or equivalent modified with water and cement at the ratio 2:1:3 (MIXPRIME AC 100 : water : cement) by volume with a slow speed mixer machine. This compound shall be applied with sufficient thickness to cover the holes/pores/cracks @ 1.000 Liter / SQM (0.350 Lt of MIXPRIME AC100 / SQM) and the raw primer should be complain with ASTM 4541 and the Solid content 49% +2% b ) Second Layer ? Supply and apply of 2 x 2 mm welded with alkaline resistant coated / non-woven 40 Gsm verging fiber mesh MIXMAT GFM 50 or equivalent for a minimum over lap of 100 mm embedded in the primer coat c ) Third Layer - Supply and apply of bonding cum water tight acrylic high viscous white primer MIXPRIME AC or equivalent @ 0.250 Kg / SQM (dilution or modification not recommended) should be complain withDensity: 1.1gm/cc, Solids content: 50 % ± 2% by weight, Elongation at break ASTM D 638: >300%, Adhesion to substrate ASTM D 4541: >1 N/mm2, Tensile strength ASTM D 638: >1.5 N/mm2, Reduction in chloride ion ingress: 94%@28 days d ) Fourth Layer ? Supply and apply of high elastomeric acrylic waterproofing cum weather proof high viscous white liquid membrane MIXGUARD HR or equivalent @ 0.500 Kg / SQM (dilution or modification not recommended) should be complain with Density: 1.30 gm/cc , Solids content: 68% ± 2% by weight, Elongation at break ASTM D 638: 400%, Tensile strength ASTM D 412: 1.8N/mm2, Adhesion to substrate ASTM D 4541: >1 N/mm2, Water penetration DIN 1048: no leak at 7 bars (+ve side), Water vapor transmission ASTM E96: 19g/m2/day, Crack bridging ASTM C836: No cracks up to 2mm thick. E ) Fifth Layer - Supply and apply of fiber reinforced flexible high bride pure acrylic modified waterproofing cum heat reflective high viscous white liquid membrane MIXGUARD HRXtra or equivalent @ 0.500 Kg / SQM (dilution or modification not recommended)Density: 1.3 gm/cc Solids content: 68% ± 2% by weight, Elongation at break ASTM D 638: 200% , Adhesion to substrate ASTM D 4541: >1.3 N/mm2, Water penetration DIN 1048: no leak at 7 bars, Tear resistance ASTM D 1004-76: 15N/mm2 , Tensile strength ATM D 412-87: 3.0N/mm2, Solar reflectance ? ASTM G173 ? 92 %, Water vapor transmission ASTM E 96 ? 19 Kg / M2 / day.Note: 1 ) No dilution or modification recommended for item No.b,c,d and e . 2 ) All materials should be procured as per the consumption with respect of the work order. 3 ) The application should be carried out by an approved agency.4 ) The contractor should provide 5 years material warrantee from the Manufacturer and 5 year warrantee from the applicator or combined

Rennovation of Science block in JNTUA CEA;Appling two coats of Acrylic cementitious Agents on the prepared slab to remove all loose and dead mortar cleaned throughly with water (each 1mm) in two coats for excelent resistance adhesion to concrete ect including brushing the surface to all materials to work site and all operational, incidental labour charge ect; and complete for fineshed item of work.

Rennovation of Science block in JNTUA CEA;Dismantling of existing Cement mortar like terracing work in roof or floor including transport charges and scaffolding whereve necessary, sorting the dismantled material,disposal of unserviceable material with all lift and lead of 1000 meters.

Rennovation of Science block in JNTUA CEA;Supply and Fixing of 20mm dia 1.55mm thick surface P.V.C. pipe (ISI Mark) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains Makes :Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/ AKG (SD 1-3-1)

Rennovation of Science block in JNTUA CEA;Supply and Fixing of 25mm dia 1.80mm thick surface P.V.C. pipe (ISI Mark) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains Makes :Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/Anchor/ Polyline/ Orbit/ AKG (SD 1-3-2)

Rennovation of Science block in JNTUA CEA;Wiring with 2 runs of 14/0.3mm (1.0 Sqm) Fire Retardant (FR) PVC insulated flexible copper cable (ISI MARK) in existing pipe with 6A flush type switch Ceiling rose including all labour charges etc; complete for light. Bell, fan and exhaust fan points in Non-Residential Buildings (polycab make cable, Anchor make ceiling rose) Makes: V-Guard/Bonton /Finecab/ HPL / GM / Million / Goldmedal /Fortune Art /Sudhakar/Orbit/Tamra/Anchor/Plaza/Vihan/Ollvin.

Rennovation of Science block in JNTUA CEA;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with Ceiling rose and including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential BuildingMakes: Guard/Bonton /Finecab/ HPL / GM / Million / Goldmedal /Fortune Art /Sudhakar/Orbit/Tamra/Anchor/Plaza/Vihan/Ollvin. The rate excludeds the modular swiches and boxes

Rennovation of Science block in JNTUA CEA;Supply and run of 1 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete Makes: V-Guard/Bonton /Finecab/ HPL / GM / Million / Goldmedal /Fortune Art / Sudhakar/Orbit/ Tamra/Anchor/Plaza/Vihan/Ollvin SD 3-1-4a)

Rennovation of Science block in JNTUA CEA;Supply and run of 4 of 56/0.3mm (4 Sq.mm) FR/FRLS P.V.C. insulated ISI flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.(user make KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar. (SD 26X2)

Rennovation of Science block in JNTUA CEA;Supply and run of 4 of 84/0.3mm (6.0 Sq.mm) FR/FRLS insulated flexible ISI copper cable in existing pipe for mains inlcuding all labour charges etc., complete.user Makes: V-Guard/Bonton /Finecab/ HPL / GM / Million / Goldmedal /Fortune Art /Sudhakar/Orbit/Tamra/Anchor/Plaza/Vihan/Ollvin

Rennovation of Science block in JNTUA CEA;Supply and fixing TPN Distribution board with IP-43 protection (Metal Door) suitable for 3 phase ELCB / RCCB / FP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete. Makes: ABB/Standard / Havells-euro II / HPL (Techno) /Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer. (63A FP Isolator / RCCB / ELCB - 1 No for incomer, 6-32A SP MCBs - 12Nos for outgoing).

Rennovation of Science block in JNTUA CEA;Supply and fixing Distribution board with 20A single phase plug and Socket, in sheet steel enclosure with 10/16/20A SP MCB including internal connection and labour charges for Sarface etc., completeof Makes: ABB/Standard / Havells-euro II / HPL (Techno) /Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer

Rennovation of Science block in JNTUA CEA;Supply and Fixing of 1 x 36/40W Patty type tube light luminaire powder coated CRCA sheet steel housing with Copper Chokeswith 40w tube and all standard accessories.Makes: Crompton / Bajaj /Halonix/ Surya / RK / Million/ Gold Medal

Rennovation of Science block in JNTUA CEA;Supply and fixing of 48" (1200mm) Sweep 5 star rated Ceiling Fan , with double ball bearings, air delivery more than 200 cubic meter/min but without Regulator. Makes : Crompton HS Plus / Havells ES Neo/OrientEnergyStar/Halonix(Zephyr)/Polycab(Synergy Star)

Rennovation of Science block in JNTUA CEA;Supply & fixing 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark of makes complete.(user make Crompton / Almounard / Havells Turbo Force

Rennovation of Science block in JNTUA CEA;Supply and fixing 6A 3/2 pin flush type Socket with shutter. Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CP

Rennovation of Science block in JNTUA CEA;Supply and fixing of 6A 1 Way flush type Swich. Makes: GM G Home / Gold Medal Olive / Million Zoom / Great white Omega/Koncept/Vimal opel/ Anchor/Vihan/CP

Rennovation of Science block in JNTUA CEA;Supply and fixing 6A / 10A 1 Way 1 Module Modular Switch.Makes: Legrand Myrius / Crabtree verona / L&T/HPL/SchneiderLivia/GMZicono/C&S/Goldmedal(Curve/Air)/MillionMway/LogusPlatina/PanasonicVision/SalzerS90series/Precision/Koncept(Samrat/Qura)/Ploycab(Levana)/AnchorRoma/IndoAsian/Pointer/CPL/Kolors/Vihan/Hosper

Rennovation of Science block in JNTUA CEA;Supply and fixing 6A / 10A 3/2 Pin 2 Module Modular Socket with shutterMakes: Legrand Myrius/Crabtreeverona/L&T/HPL/SchneiderLivia/GMZicono/C&S/Goldmedal(Curve/Air)/MillionMway/LogusPlatina/PanasonicVision/SalzerS90series/Precision/Koncept(Samrat/Qura)/Ploycab(Levana)/AnchorRoma/IndoAsian/Pointer/CPL/Kolors/Vihan/Hosper

Rennovation of Science block in JNTUA CEA;Supply and fixing of 36W/40W (600mm x 600mm) square type LED Slim Panel Round / Square suitable for Recessed/Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec 13) : 2012 , operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV,THD<10%, with high power LED's having efficacy of > 90 lumins/watt,CCT: 3000K - 5700K,minimum CRI>70, .etc., complete Makes : Surya /C&S/ Fortune Art / Syska / Enrich / Stanjo / Polycab/ Ib LED/Opple/R LED/Luker/ Orbit/Trinic/Lumen/Panasonicb)LED MAKE : CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT

Rennovation of Science block in JNTUA CEA;Supply and fixing of 16" (400mm) Wall mounted Fan.Makes: Crompton High Flow / Bajaj Elite / Havells Swing Premia gold / Orient Wall 45/Halonix Krypton

Rennovation of Science block in JNTUA CEA;Supply and fixing 19 / 20 mm Steel tube fan down rod

Rennovation of Science block in JNTUA CEA;Supply and fixing Consealed box PVC / MS with hook for fan

Rennovation of Science block in JNTUA CEA;Supply and Fixing stepped type electronic Regulator of Makes: GM G Home / Gold Medal Olive / Million Zoom /Great white Omega/Koncept/Vimal opel/Anchor