Jawaharlal Nehru Technological University Tender

double pole structure work;Supply and fixing of 100 A 11 KV Horn Gap fuse set as per IS 9385 on existing DP structure with 6 nos 24 KV /22 KV post Insulators( IS 5350, Hot dipped Hard ware, fuse wire of required size etc., complete

double pole structure work;Supply and Run of 25mm x 3mm copper strip including cost of all accessories and labour charges etc., complete 25mm x 3mm Copper Flat (0.663Kgs/1Mtr)

double pole structure work;Providing independent earthing for Important equipment with 100mm dia Heavy gauge C.I ( Cast iron ) pipe with Flange 2.5m long enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

double pole structure work;Supply and Run of 25mm x 6mm GI Flat (1.18Kgs/1Mtr)G.I Strip including cost of all accessories and labour charges etc., complete.

double pole structure work;supply of 40mm Epoxy Insulators for lighting arresters Earthing.

double pole structure work;Painting with 2 coats Zinchomate red oxide duly scraping existing paint followed by 2 coats hammerstone grey paint etc complete.

double pole structure work;Labour charges for erection of Double pole Structure for 11KV control point including all Labour charges Excavation pits and concereting including Bolt and nuts washers etccomplete.

double pole structure work;supply of50x50x6mm M.s channels

double pole structure work;supply of50x6mm M.s flats

double pole structure work;Providing transformer plinth 1.2 x 1.2 x 1.5 mtr in size with necessary excavation in ground at the bottom with 150mm thick 1:2:4 cement concrete raft at the bottom and top and 225mm thick wall constructed in stone masonry and remaking hallow portion shall be filled with stone chips duly plastered 20mm thick outsides including watering etc., complete.

double pole structure work;Supply Installation Testing and commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated / epoxy / PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure

double pole structure work;Rotary handle and spider links for 400A MCCB

double pole structure work;Supply of 400A 4 pole MCCB

double pole structure work;Supply of 250A 4 pole MCCB

double pole structure work;Supply of 125A 4 pole MCCBs

double pole structure work;63 A four pole isolator

double pole structure work;Supply of 0-500 Digital Ammeter .

double pole structure work;Supply of 0-500V Digital Volt meter in existing box

double pole structure work;Supply of selector switches

double pole structure work;Supply of indicator lamps

double pole structure work;Supply of C.T Coils

double pole structure work;Supply of 25 Sqmm Pvc insulated flexible copper cable

double pole structure work;Supply of 10 Sqmm Pvc insulated flexible copper cable

double pole structure work;50mmx50mmx6mm MS channel for suport of pannel board

double pole structure work;Supply and fixing of 400A alluminium Bus bar chamber

double pole structure work;Labour charges for fixing and Connections of the pannel