Jawaharlal Nehru Technological University Tender

Providing Aluminum doors, repairs to damaged flooring of ACE rooms and providing blinds in ACE 2 roo;Plain Cement Concrete (1:2:4) using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for septic tank bed, in sunken slabs for finished item of work. (APSS No. 402)

Providing Aluminum doors, repairs to damaged flooring of ACE rooms and providing blinds in ACE 2 roo;Flooring with Double charged / multicharged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) as directed by the Engineer in Charge.

Providing Aluminum doors, repairs to damaged flooring of ACE rooms and providing blinds in ACE 2 roo;Supply and fixing of partitions made of seccolor pre-painted steel (base steel as per IS 513 of 0.58 mm thick ?D? quality,galvanizedasperIS277withZincof 120 GSM).Primer coated with epoxyprimerof5-7micronsthick,finishpainted with a polyester paint of 12-16microns thick alkyd backer. Section for outer frame should be 46x52mm, section for shutter should be 46x46mm,section for mullion should be 46x70mm,section for beading should be 18x25mm and section for middle and bottom rail(Lock Rail and Kick Rail) of size should be 23x130mm.The partition should bepaneledwith9mmpre-laminatedparticle board to a height of 0.91m from the bottom, and remaining height with5mmthickplainglassWithEthylPropylene Diamine Monomer(EPDM)Gaskets. The sections are to be cut to length, miter joined with corner bracket Centre mullions are to be fixed using mullion cap .Gaskets made of Ethyl Propylene Diamine Monomer(EPDM). Corner brackets made of CRCA with zinc phosphate. Mullion caps made of Glass filled nylon. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws, and complete for finished item of work Fixed Partition with Door: Outer framesectionsizeof46x52mm,mullionsection shouldbeof46x70mm,fixedbeading should be of 18x25mm, section for shutter should be of 46x46mm and section for middle & bottom should be ofsize23x130mm including cost and conveyance of all materials all labor charges all leads and lifts to the finished item of work as directed by the Engineer in charge to the finished item of work.