Irrigation And CAD Department Tender

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Supplying Galvanized digging 150mm ? 20mm thickness heavy Gauge flanges

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Supplying of GI Bolt(5/8 X 3?) and Nuts, Watchers (Kg)

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Black Neoprene 4mm thick rubber packing sheet

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Supply, delivery, erection and transportation of 30 HP Three phase Horizantal Open well Submersible motor Pump set(Mono block) confirms to IS 14220 : 1994 : make Kirloskar/CRI /TEXMO /KSBHead 60 to 70 mts ,

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Supply, delivery, erection and transportation of 15 HP (80 x 65) Three phase Horizantal Open well Submersible motor Pump set(Mono block) confirms to IS 14220 : 1994 : make Kirloskar/CRI /TEXMO /KSBHead 35 to42 mts , Discharge :40000lph erect with all accessories, icludes all labour charges, Transportation charges, and as directed by the Engineering incharge of the work.

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Supply of 3 Core 16 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Supply, Errection and Commissioning of 30 HP control panel board made with 16 guage CRCA sheet duly painted and locking arrangements and comprising with the following a) L & T make star and delta starter - 1no B) 200A and 125A mps 2 feeder - 1no C) Single phase prevernter of L&T make - 1 no D) Suitable oil cooled makes : Siemens / Crompton / L&T /(MU1 DOL) / C &S as per ss and as directed by the Engineering incharge of the work.

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Fabrication ,transportationand and supply of wall mounted control panel board of size 600x 600x 250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Voltmeter ; 0-500 V 96x96mm size. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size).Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco / Rishab Single phase preventor of suitable range Makes: L&T / Minilec / Powertec. 32 A TP, 10KA MCB. Makes: Legrand / Schneider Indication lamps (R-Y-B) with switch control Voltmeter & Ammeter selector switch Supply and fixing of ISI Mark suitable capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells.

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Manufacture, Supply, & Delivery of HDPE pipes conforming to IS 4984 - 1995 4.0 kg/sqcm including transportation to anywhere in A.P, excluding all taxes (Supply up to 90mm dia. in coil & above 90 mm dia. straight Length) Outer dia 75 mm

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Supply of 310 capacity power control runnning forward & back ward load winch 3 HP motor 3 phase 960 rpm TEEFC bear motor, 310 capacity 440 v AC & DC electronic break 310 branch gear wheel rpm of 1:15 rotate gear box 300mm X 50 mm round rotated roller 50 mm X 500 mm stainless steel shaft 50 mm X 20mm flexible running rope 140 ft sellow black high speed bearings control panel board hand remote button to UP & Down & off 4 core 1 Sqmm copper flexible cable , 4 core 4 Sqmm copper flexible cable wire incoming & outgoing. fixing of pedestral 75 mmX75 mm thickness 900mm X 900mm length.

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Towards labour charges for Removal of old damaged G.I Pipe line by cutting into pieces by suitable method and placed outside the gallery and stocking in department godown (out side the El + 780 ft gallery ), it including labour charges, cost of all materials and all other incidental charges, as directed by the Engineer in charge.

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Towards Labour charges for Transportation of HDPE pipe into dam galleries, laying in position, fixed to the gallery wall with necessary clamps at every 1.5 mts interval, drilling of holes,bolts etc. and material cost of clamps,bolts, Hire charges for machine & labour and other all incidental charges to a complete the finished item of work as directed by the Engineer in charge.

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Towards Labour charges for Transportation of HDPE pipe into dam galleries, laying in position, fixed to the gallery wall with necessary clamps at every 1.5 mts interval, drilling of holes,bolts etc. and material cost of clamps,bolts, Hire charges for machine & labour and other all incidental charges to a complete the finished item of work as directed by the Engineer in charge.

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Supply and transportation of 3.5 core 400 Sq mm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I)./1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Supply,transporatation & installation of 150mm x 50mm x 1.6mm size of Hot Dipped Galvanized Iron perforated cable trays with cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete (NB:Add 30% Extra for perforated cable tray with cover)

Improvements to the water discharge conveyance system by replacing existing damaged old discharge co;Supply and erecting ISI make submersible pump sets suitable for erection in bore well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage induction motor of 3 phase, 415V, 50HZ.., A.C supply, heavy windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, as per IS 14220 WITH AMDT NO 2(SECOND REVESION INCORPORATING AMDT :1)SUITBLE FOR BORE SIZE 250mm, FOR USE IN BORE/ open WELL FOR HANDLING CLEAR COLD WATER HAVING MOTOR AS PER IS 9283-1995 (REAFFIRMED 02) WITH AMDT 1,2 & 3 OF WET TYPE FOR CONTINOUS RATING OPERATING AT 3000RPM SYNCHORONOUS & SPECNS AS UNDER GENERAL TECHNICAL REQUIREDMENT IS ENCLOSED AT ANNEURE (I) WITH 60HP pump erected with necessary H- type clamps of suitable size and strength including cost of all materials . Transportation and labour charges etc.., complete. to discharge 2000lpm @ 100mts Make : Kirloskar/KSB/UNEEL/Texmo