Indian Institute Of Information Technology Tender

filling of concrete rubbish ,brick rubbish or soil by mechanical transport or Manpower from the approved site, also including ramming and watering of the earth in layers not exceeding 20cm, as instructed by Engineer - in - charge

filling of sand , also including ramming and watering of the earth in layers not exceeding 20cm, as instructed by Engineer - in - charge

Supplying and laying 150 mm thick Plain cement concrete grade 1:3:6 (1 cement: 3 coarse sand :6 graded stone aggregate 20 mm nominal size)well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling, curing , dressing & finishing the top smooth also includes lifting,placing and surface preparation with zero zero level as instructed by the Engineering-charge with. Note: Only RMC OR Mixer Machine mixed concrete will be allowed

Supply and installation of V Panel walls 100mm thick Including cost of all materials ,like channels labour charges, lead & lift, curing charges, transport charges, incidental charges if any complete.,

DOOR FRAMES: Providing and fixing in position Anodized / Powder coated Aluminium box frame of size 63x38x3 mm thick from JINDAL profile number 20004 from double groove of 1.790 kg per running meter or 20005 from Single groove of 1.777 kg per running meter shaped, planed and fixed with necessary jointing method approved including pins, nails, screws and bolts etc. Rate shall include for cost of bolts, nuts, screws, nails, pins, approved hold fast and grouting for fixing anchor fasteners / coach screws and including painting of approved color etc. complete as directed shall be approved by PMC as per design calculation and shop drawing of Frames and accessories. For Double Leaf Door 1000 mm X 2100 mm

DOOR SHUTTERS (Double leaf): - Providing and fixing of 32mm thick flush door Shutters (Jackson or approved equivalent make) Single leaf of any size; solid core of block board type bonded with phenol formaldehyde synthetic resin thermo-pressed with 8mm thick teak wood external lipping. The construction procedure of the shutter should be as per IS 2202. The shutter should be shop prepared for taking mortise lock or latches, lock block of wood may be provided for fixing the hard ware. The size of block, shall perfectly correspond to the maximum size of lock, covered in IS 2209. All the four edges of the door shutter shall be square. The shutter shall be free from twist or wrap in its plane and of required size Etc. complete as directed Rate shall be include for providing a glass vision panel of size 450 X 450 mm. The 32mm thick fully flush shutter with commercial ply on both sides finished with 1.5mm thick decorative shade laminate including providing an opening with teak wood lipping for fixing the glass vision panel. The door type and shade should match with the doors fixed in the existing faculty cabins in the same floor . Rate shall be including all the required necessary approved hardware / ironmongeries ( Yale/Dorset/Dorma) And all the necessary fixing accessories as shown in the approved shop drawing or as directed. , including cost of all materials, lead & lift, labour charges, transport charges, incidental charges if any complete. Double leaf door 2000 mm X 2100 mm

Supplying and fixing of aluminum windows of size 2 M x 4 M in And all the necessary fixing accessories shown in the approved shop drawing or as directed. , including cost of all materials, lead & lift, labour charges, transport charges, incidental charges if any complete.as instructed by Engineering - Incharge

PAINTING: - Supplying, providing and applying internal painting system over the new gypsum partition walls and new masonry walls ( 1 coat primer + 2 coat Putty + 2 coat of Emulsion paint ) , including cost of all materials, lead & lift, labour charges, tools & plants, transport charges, incidental charges if any complete as per the instruction of the Engineer-in-charge

Providing , supplying & laying carpet floor of approved shade and quality suitable for students class rooms with including cost of materials, transport, lead & Lift, labor, tools & plants, curing etc., complete.

ACOUSTIC WALL PANELLING(Acoustical Fabrics panels Stretch fabric) Supply, Providing, fixing and Installation of Acoustic Wall Panel made of Fiber board of 25mm thick finished with wrap-up fabric wrinkle free finish having NRC - 0.7 of approved shade, make and colour with Rockwool layer between wall and the panel. The Acoustic Wall Paneling shall be installed with necessary Channels, studs, Hardware system as per manufacturer specifications, as per approved shop drawings and as directed by Engineer-In-Charge and Acoustic Wall Panel shall be Moisture resistance, Fire Class 1 having Green Rating or Low VOC, Termite proof, complete for finished item of work complete as directed by Engineer-In-Charge MAKE:ANUTONE/ KNAUF DANOLINE/ ARMSTRONG /CREDENCE/OR/EQUIVALENT

GRID FALSE CEALING: - Providing and fixing Gypsum celling on the edges and Acoustical suspended false ceiling( at center) system with mineral fiber regular edge-laying tiles of size 600 X 600 mm X 16 mm and should have humidity resistance of 90% RH, Average NRC 0.7 light reflectance 80% thermal conductivity K=0.057-0.057 w/m0c, color white , fire performance class0/class1 (BS-476) in modular size of 600x600x16mm,600x600x15mm laid on 24mm_Hot dipped Galvanized steel suspension system having rotary stitching on the Main Runner,1200mm&600mm cross T’s including cost all materials, labour, lead& lift, transport and incidental charges if any complete

Providing and laying of approved color of aluminum skirting of 2" height in the classrooms complete for finished item of work complete as directed by Engineer-In-Charge

Supplying and laying testing and commissioning of 2R x 2.5 sq mm and 1.5sqmm copper wire with suitable PVC conduct of approved make in partition wall including necessary junction boxes , bends , elbows etc, in surface/recess system as required, the rate includes minor civil works such as chipping, plastering and placing chicken mesh/fibre mesh on the pipes to avoid cracks and make good finished surface to match with original surface and fixing materials for Circuit, Including of all materials, lead & lift, labour charges, Transport charges etc., complete ,(UPS/RAW-power &Lighting)

Supplying, laying ,testing and commissioning of 2R x 4 sqmm and 1R x 2.5sqmm copper wire with suitable PVC conduct of approved make in partition wall including necessary junction boxes , bends , elbows etc, in surface/recess system as required the rate includes minor civil works such as chipping, plastering and placing chicken mesh/fibre mesh on the pipes to avoid cracks and make good finished surface to match with original surface and and fixing materials for AC Circuit Including material cost, Transport and labor charges Etc., complete.

2 x 2 feet square celling light Supply and fixing, testing and commissioning of LED light fitting of size 600 X 600 mm of approved make with all other necessary accessories, fittings etc., as required. Fittings & luminaires Rate will be inclusive of all supports & Arrangements Including Transport and labor charges Etc., MAKE: Wipro/Panasonic

Supplying, fixing, testing and commissioning of 6A switches- with suitable Modular Box of approved make in partition wall including necessary junction boxes , bends , elbows etc, in surface/recess system as required the rate includes minor civil works such as chipping, plastering to make good finished surface to match with original surface and front plate for UPS power, Including cost of all material, labour charges, lead & lift, Transport charges, etc., complete.,

Supplying, fixing, testing and commissioning of celling fan Including cost of all material, labour charges, lead & lift, Transport charges, etc., complete.,The length of the fan rod shall be as per the site conditions and no additional cost shall be paid

Supplying and fixing of Fan Regulator including cost of material and labour, transport, loading ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying, fixing, testing and commissioning of 20A socket -1nos and 20 A switch – 1 No with suitable 3M Box and front plate of approved make & model in partition wall including necessary junction boxes , bends , elbows etc, in surface/recess system as required the rate includes minor civil works such as chipping, plastering to make good finished surface to match with original surface for RAW power, Including cost of all material, labour charges, lead & lift, Transport charges etc., complete.,

Supplying and laying of Main CABLE 4 CORE-25sqmm almond cable including cost of material and labour, transport, loading ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and laying of Main CABLE 4 CORE-10sqmm almond cable including cost of material and labour, transport, loading ,lifting ,scaffolding etc as instructed by engineering In charge

supplying and fixing of distribution board DB (3 Phase),4 way DB with MCCB & MCB including cost of material and labour, transport,loading ,lifting ,scaffolding etc as instructed by engineering In charge

supplying and fixing of distribution board DB (3 Phase),12way DB with MCCB & MCB including cost of material and labour, transport,loading ,lifting ,scaffolding etc as instructed by engineering In charge

Removing ,servicing and Re-fixing the old AC including cost of material and labour,lifting ,scaffolding ,core cutting,installing with PVC pie etc as instructed by engineering In charge

Supplying and Fixing of LED PROJECTOR(EPSON/Sony) with LED Display,1500 Lumen , HDMI Connectivity and Projector Brightness: 3600lm including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of motorized PROJECTOR SCREEN with remote 120" Daigonal 58"x104" of approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of Rack -12 U (Dlink)of approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of Cisco 24 port Switch-SG 300 Manageble Switch of approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of CC Camera (CP PLUS or HIKVISION) IP Cameraof approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of Access Point (ARUBA) of approved brand including cost of material, to be connected with the controller vlan to be configured and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of HDMI Cable of approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of HDMI Splitter of approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of VGA Cable of approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of Splitter-VGAof approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of CAT6A cable approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge

Supplying and fixing of Amplifier approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge Specifications: 1.Power output: 300W max, 250W RMS at 10% THD, 220W RMS at 5% THD, 200W RMS at 2% THD 2. Signal to noise ratio: 60dB 3. Bass and treble: ±10dB at 100Hz, ±10dB at 10kHz 4. Preamp: 200mV/600Ω 5. Line: 1V/1kΩ 6. Speaker outputs: 4Ω, 8Ω, 70V & 100V 7. Frequency response: 50 – 15000Hz ±3dB 8. Input/output: 6 × Mic 0.65mV/4.7kΩ, 2 × Aux 100mV/470 kΩ, 1 × Line 1V/50kΩ 9. AC & 24V DC operation: 6 Mic 0.65mV/4.7k, 2 Aux 100mV/470 k 10. Resettable circuit breaker: Yes 11. Instant transfer to DC power: Yes

Supplying and fixing of Microphone (Hand mic & Collar Mic)approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge Specifications: Receiver : Dual Channel Non-Diversity Frequency Response : 50Hz – 15 KHz Polar Pattern (Hand & Lapel mic) : Cardioid Output : Balanced XLR/ Unbalanced ¼" Jack Power Req. (Hand & Lapel mic) : 2 x 1.5V AA Receiver :240V AC 50Hz for AC Adaptor Supplied with the set

Supplying, fixing and testing of Speakers (side speakers) with Aux cables and laying testing of speaker wire for the speakers with conduits of approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In chargeSpecifications: 1. High fidelity 2-Way PA Wall Speaker in compact & attractive Black or White plastic housing. The suffix B & BT denote Black cabinet, and W & WT denote White cabinet. 2. Comprises of a Water Resistant PP coated cone Woofer, a Titanium Dome Tweeter and a 2-way Crossover Network. 3. ASX-912B and ASX-912W are low impedance 8Ω speakers. 4. ASX-912BT and ASX-912WT are meant for use on 100V line with power taps of 90W, 60W, 30W & 15W. 5. Easy power tap selection through a slotted rotary switch knob at the rear. 6. ‘U’ type bracket for convenient & firm mounting of the wall speaker. 7. Ideal for various background music & general PA application.

Supplying and fixing of Auxiliary Cables of approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge Specifications: 1) 3.5mm stereo to 6.5mm Stereo large three-core audio cable, gold-plated plug, excellent sound quality, double shielding, no current sound, fidelity sound quality. 2) Connect the guitar to the computer, restore more sound details, and achieve easy recording/tuning for guitars, electric pianos, drums and other musical instruments. 3) The sound quality is clear and no noise, high-fidelity shielding design, full and delicate sound, say goodbye to noise/current sound. 4) Listen to the moving rhythm, using high-quality alloy shell, can shield external interference from external damage, more durable. 5) High-fidelity restores the sound quality, the human voice is delicate and warm, the background sound is clean, the separation of high and low frequencies is deep, the intermediate frequency is full and sweet, and the high frequency is sharp and not thorny. 6) The surging bass you want, creative stereo dynamics, eliminating interference, making the airflow more stable to provide surging power for the bass. 7) The sound effect you want is inseparable from better materials. Encrypted braided copper shielding can have stable anti-interference, and real 4N oxygen-free copper can make the transmitted signal high-fidelity. 8) Plug and play, compatible with a variety of devices, suitable for audio transmission between devices with 3.5mm interface and 6.5mm interface devices.

Supplying and fixing of HDMI to VGA Connectors of approved brand including cost of material and labour ,lifting ,scaffolding etc as instructed by engineering In charge Specifications: Connector Type : VGA, HDMI Cable Type : HDMI, VGA Compatible Dev ices : Projector, Laptop, Monitor, Television, DVD Player, Personal Computer Special Feature : High Speed