Endowments Department Tender

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads and contractor profit etc., complete Plastering Removal old walls

Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and 1m additional lift charges over the initial depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads and contractors profit complete for finished item of work excluding seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales and other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads and contractors profit complete for finished item of work. (APSS No. 402) flooring staff quarters

VRCC M-20 grade nominal mix (cement :fine aggreegate: coarse aggregate) corresponding to table 9 of IS456 using 20mm size machine crushed hard granite metal (coarse aggreegate)from approved Quarry including cost and conveyancej of all materials like cement,fine aggregate(sand)coarse aggregate, water etc, to site and excluding seigniorage charges,sales and other taxes on all materials including all operational incidental and labour charges such as machine mixing , laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering shuttering.

Flooring with ceramic tiles 7.30mm thick , 1st quality and of size as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread at the rate 3.3 Kgs per Sqm and jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand , water and tiles etc., and overheads and contractors profit complete for finished item of work. (APSS No.701 and 707)

Gronolithik Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete, excluding seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives interior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. approved brand,of first grade over cement primary making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and operational, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work as per SS911 for internal walls.

Painting to new walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. of approved brand and colour over a base coat of appropriate primer of approved brand,of first grade making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and operational, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work as per SS911 for External walls.

Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of red oxide to new iron work including cost and conveyance of all materials to site, sales and other taxes, incidental, operational and all labour charges etc.,and overheads and contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 and 1207).

Painting to old wood work and flush shutters with two coats of synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre of approved brand and shade including cost and conveyance of all materials to site and all labour charges etc. complete, sales and other taxes on cost of all materials etc.and overheads and contractors profit complete (APSS No.1200, 1207 and 1211) in all floors.

Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 200mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding seigniorage charges, sales and other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 and 504).Basement level

Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding seigniorage charges, sales and other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 and 504).Ground Level

Masonry work in CM(1:6) prop (Cement : Screened sand) with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, excluding seigniorage charges, sales and other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete for finished item of work. (APSS No. 501 and 504).first Floor

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member and minimum 2no.s for horizontal member.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM.The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member and minimum 2no.s for horizontal member.

Supply of Mason/Man Mazdoor/Painter/Carpenter for Various Patch works at various Places including cost and conveyance of all materials and Labour charges etc., complete for finished item of work.Mason

Supply of Mason/Man Mazdoor/Painter/Carpenter for Various Patch works at various Places including cost and conveyance of all materials and Labour charges etc., complete for finished item of work.Civil Worker/Man mazdoor

Supply of Mason/Man Mazdoor/Painter/Carpenter for Various Patch works at various Places including cost and conveyance of all materials and Labour charges etc., complete for finished item of work.painter First class

Supply of Mason/Man Mazdoor/Painter/Carpenter for Various Patch works at various Places including cost and conveyance of all materials and Labour charges etc., complete for finished item of work.welder

Supply of Mason/Man Mazdoor/Painter/Carpenter for Various Patch works at various Places including cost and conveyance of all materials and Labour charges etc., complete for finished item of work.carpenter

Painting to old walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives internal grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. approved brand,of first grade over cement primary making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and operational, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work as per SS911 for internal walls.

Painting to old walls with 2 coats of acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. approved brand,of first grade over cement primary making 3 coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and operational, labour charges and incidental charges such as scaffolding, lift charges etc., complete for finished item of work as per SS911 for External walls.

Plastering with CM (1:3) 12 mm thick using the best river sand, including cost and conveyance of all materials, labour charges and curing etc., complete complying with standard specifications and directed during execution of work. for 10 Sq.m

Supply of pulmary leafs for laying in various festivals and necessary places as directed by engineer in charge, including coconut rope for tying, transportation, loading and unloading, and Labour charges etc., complete for finished item of work. Main temple inside

Preparation and fixing of M.S. heavy grills for Trusses, Stanchions,Heavy beams and Girders using chain pulley block,derek pole arrangements etc., in position including cost of Mild Steel squares/Flats etc.,welding rods,power charges and fixing charges etc., complete.

Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread at the rate 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour and lift charges, half rounding the edges of treads , polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads and contractors profit complete for finished item of work (S.S.701 and special)

Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental ,labour charges,hire charges of T and P etc., and overheads and contractors profit complete for fnished item of work(APSS NO.309 and 310)

Providing High Yield Strength Deformed (HYSD) (Fe 415/500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads and contractors profit complete for finished item of work in all floors.(APSS No.126)

Supplying and fixing of false ceiling using Plaster of paris Boards 12 mm thick with standard GI ceiling angles, sections perimeter channels includingcost and conveyance of all materialsand labour charges etc complete

Roofing: - Roofing will be provided with 0.5mm thick galvanized G.I. profiled sheets fixed to the purlins with 14 size self drilling screws withn eoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3mm Butyl tape. The sheets are provided with anti capillary grove.

Providing and fixing Pre painted Steel sliding Window/Door fabricated from roll formed sections made of Galvanized steel colour coated /powder coated (Base Steel as per IS 513 ‘D’ quality galvanized as per IS 277 with Zinc of 120 Gms./ Sq.mtr) with total coated thickness of 0.58mm. Primer Coat with epoxy primer of 5-7 microns thick, finished paint with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. The External Section for two track Sliding Window should be of 44 x 59mm with a provision for bottom track insert profile of 10x9 mm made of aluminium. Section for Window glass shutter should be of 35x49mm, Section for Window Euro groove should be of 25x24mm made of plastic to accommodate standard accessories, and section for window lap strip should be of 21x4mm made of plastic. Section for Door shutter should be of 35x67mm, Section for Door Euro Groove 25x31mm made of plastic to accommodate standard accessories and size of lap strip should be of 39x41mm. The Window/Door to be panelled with 5mm thick plain float glass. The gaskets are to be made of Ethyl Propylene Diamine Manomer [EPDM]. Corner Brackets for internal and external frame to be made of glass filled nylon. Touch lock to be provided for Window Shutter. Sections are to be cut to length, joined and assembled by means of corner brackets. The above frame to be fixed to Brick/Concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm screws into the caps through frames. The Grill for safety for windows to be made of 10mm thick square rod bars with 152mm pitch for complete item of work . For Door there will be no Safety Grill including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Supply and fixing Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 40 mmthick conforming to IS:2202 etc., complete for finished item of work.

laying of precast concrete blocks for paving of M-40 grade and thickness not less than 80 mm for Medium traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification with strong vibratory compaction, of approved size design and shape laid in required colour and pattern over and including 50mm thick compacted bed of Course Sand, filling the joints with fine sand etc., all complete.

Painting two coats with synthetic enamel paint Gr-II having VOC (Volatile Organic Compound) content less than 50 grams/litre to old iron work including cost and conveyance of all materials to site, sales and other taxes, incidental, operational and all labour charges etc., and overheads and contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 and 1207).

Brick masonry for panel walls in superstructure with CM (1:6) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 35 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, excluding seigniorage charges, sales and other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads and contractors profit complete for finished item of work. (APSS No. 501 and 504).

Providing and applying wall putty of White Cement or Polymer or Cement basedsuch as NCL/Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surfae even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface clean and wipe offo loose dust , applying putty/texture paint filler by putty knife/muslin pad, air dry for 2 to 3 hours for the surface preparation including cost and coveyance of all materials to wor site and all perational incidental, labour charges etc., complete for finished item of work for external wall, excluding cost of access scaffolding.

Supply and fixing of PVC false ceiling on MS/GI made skeleton framework. The frame shall be 24 X 48mm MS tube section fixed along with the wall. The entire frame work shall be concealed with PVC section having overall dimensions of 6 X 250mm with a wall thickness of 1mm Plus or Minas 0.3mm with tongue and groove system, provided with necessary arrangements for electrical connections, complete, for finished item of work.

Providing cladding to walls with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete excluding seigniorage charges etc., and overheads and contractors profit complete for finished item of work.

WATER PROOFING TREATMENET Cleaning of the surface : For Waterproofing treatment ( If the surface is detoriated or damage / existing tiles or block laying) Chipping with pneumatic power chiseling equipment and until to ahcieve the hard mother concrete surface. Duly removing of debris, cleaning of the surface from dirt, dust and other foreign matters and water jet cleaning etc., complete for finished item of work.

SPECIALISED INJECTION GROUTING WITH CEMENT AND CRYSTALLIZATION ADMIXTURES :A) Drilling of holes with power drilling machine to the required depth (12mm to 14mm dia holes) B) Fixing of Rubber Nozzles with cement and quick setting, Rapid hardening compound putty Rapidstrong qs or equivalent,C) Grouting of holes with 140 PSI Grout pump with cement slurry mixing with Specialized crystallization compound-Roofex gp or equavalent 5 percentage by weight of cement. D) After completion of grouting, Remove the Rubber nozzles e]. Later sealing of the hole with polymer cement putty-ROOFCRETE AR (Armstrong ) / ZORIGROUT CMG (PMCC) / POWER n GUARD ARM (EBT) /WATERSHIELD AR / Fosroc NITOBOND AR Plus Cement Grouting points

CRACKS AT TERRACE / BEAM and WALLS JUNCTIONS - SEALING THEJOINTS WITH POLYURETHANE SEALANT : SPECIALISED POLYURETHANE SEALANT TREATMENT : a). Making ‘’U” Groove (width and depth of 6mm x 6mm) b). Filling of the groove with polyurethane sealant – ROOFSEAL PU (Armstrong ) / POWER n SEAL PU (EBT) / THIOFLEX 600 (Fosroc) / ZORISEAL PU (PMCC) / SIKAFLEX PRO -3 WF (Sika ) WATERSHIELD PU 3

Supply and applying of the bound agent with Mix Bound AC, water and cement (2:1:3) (Mix Bound AC:Water:Cement) etc complete Lowest quotaton rate

Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, excluding seigniorage charges, sales and other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads and contractors profit complete for finished item of work. (APSS No. 901 and 903).

Providing and laying five layerswaterproofing cum heat reflective treatment (MIXGUARD HR5 or equivalent) over the old / new roof slab/terrace, all as directed by Department Engineer-in-charge with the following specification and should be complain with the following technical parameters for the system - Density: 1.3 Gm/cc, Solids content: 68 Percetage Plus or Minas 2 Percetage by weight, Elongation at break ASTM D 638: 200 Percetage (for the system), Adhesion to substrate ASTM D 4541: Grater then 1.5 N/mm2, Water penetration DIN 1048: no leak at 7 bars,Tear resistance ASTM D 1004-76: 17N/mm2, Tensile strength ASTM D 412 87:6.0N/mm2 a ) First Layer - Supply and Apply penetrative cum bonding primer as base primer cum sealer coat using MIXPRIMEAC100 or equivalent modified with waterand cement at the ratio 2:1:3 (MIXPRIME AC 100 : water : cement) by volume with a slow speed mixer machine. This compound shall be applied with sufficient thickness to cover the holes/pores/cracks at the rate 1.000 Liter Sqm (0.350 Lt of MIXPRIME AC100 Sqm) and the raw primer should be complain with ASTM 4541 and the Solidcontent 49 Percetage Plush 2 Percetage b ) Second Layer – Supply and apply of 2 x2 mm welded with alkaline resistantcoated/ non-woven 40 Gsm verging fiber mesh MIXMAT GFM 50 or equivalent for aminimum over lap of 100 mm embedded in the primer coat , c ) Third Layer - Supply and apply of bonding cum water tight acrylic highviscous white primer MIXPRIME AC orequivalent at the rate 0.250 Kg / SQM (dilutionor modification not recommended) should be complain with Density: 1.1gm/cc, Solids content: 50 Percetage Plus or Minas 2 Percetage by weight, Elongationat break ASTM D 638: Grater then300 Percetage , Adhesion to substrateASTM D 4541: Grater then1 N/mm2,Tensile strength ASTM D 638: Grater then1.5 N/mm2, Reduction in chloride ion ingress: 94 Percetage at the rate 28 days, d ) Fourth Layer – Supply and apply of high elastomeric acrylic waterproofing cum weather proof high viscous white liquid membrane MIXGUARD HR or equivalent at the rate 0.500 Kg / SQM (dilution or modification not recommended) should be complain with Density: 1.30 gm/cc , Solids content: 68 Percetage Plus or Minas 2 Percetage by weight, Elongation at break ASTM D 638: 400 Percetage , Tensile strength ASTM D 412: 1.8N/mm2, Adhesion to substrate ASTM D 4541: Grater then1 N/mm2, Water penetration DIN1048: no leak at 7 bars (positive side), Water vapor transmission ASTM E96: 19g/m2/day, Crack bridging ASTM C836: No cracks up to 2mm thick. E ) Fifth Layer - Supply and apply of fiber reinforced flexible high bride pure acrylic modified waterproofing cum heat reflective high viscous white liquid membrane MIXGUARD HRXtra or equivalent at the rate 0.500 Kg / SQM (dilution or modification not recommended)Density: 1.3 gm/cc Solids content: 68 Percetage Plus or Minas 2 Percetage by weight, Elongation at break ASTM D 638: 200 Percetage , Adhesion to substrate ASTM D 4541: Grater then1.3 N/mm2, Water penetration DIN 1048: no leak at 7 bars, Tear resistance ASTM D 1004-76: 15N/mm2 , Tensile strength ATM D 412-87: 3.0N/mm2, Solar reflectance –ASTM G173 – 92 Percetage , Water vapor transmission ASTM E 96 – 19 Kg / M2 / day. Note: - 1 ) No dilution or modification recommended for item No.b,c,d and e. 2 ) All materials should be procured as perthe consumption with respect of the work order. 3 ) The application should be carried out by an approved agency. ) The contractor should provide 5 years material warrantee from the Manufacturer and 5 year warrantee from the applicator or combined Joins

EXPANSION JOINT TREATMENT Prepration of the surface: For existing expansion joint treatment : Chipping of the exisiting treatments over the expa nsion joints concrete /brickmasonry with pneumatic power chiseling equipment and until to ahcieve the hard mother concrete surface.Chipping and removing of existing bituminous mastic boad upto 25mm deep. Duly removing of debris, cleaning of the surface from dirt, dust and other for eign matters Joints

SPECIALISED POLYSULPHIDE SEAL ANT TREATMENT TO THE EXPANSION JOINTS ON TERRACE: (Size:25mmx12mm) Application of one coat of-High performance specially designed SBR l atexpolymer based bonding agent ROOFBOND SBR (Armstrong) /POWERnBONDSBR(EBT) /NITOBONDSBR(Fosroc)ZORIBONDSBR(PMCC)/SIKALATEX(Sika)WATERSHIELD BOND SBRASTM - C920 95/DIN18549TT-S-00227E or equivalentmixing with cement aspermanufacturers C) Providingandapplication of Acrylic Polymer modifiedreinstatement concrete/mortaradmixturewith ROOFCRETEAR(Armstrong)/ZORIGROUTC MG(PMCC)/POWERnGUARDARM(EBT)/WA TERSHIELDAR/ Fosroc to finish the damaged edges of jointand making the groove.D) .Providing and fixing of masking tape on top of the joint bothsides. e) Providing and fixing of Back up support material of Polyethelene foamto leave the depth of 12mm on the joint. F) Providing andapplication of one coat of polysulphideprimerwith– Polysulphide primer on inner edge on joints. G).Providing and application of Twopart Polysulphide sealant to a widthof 25mm and 12mmdepthwith ROOFSEALPS(Armstrong)/ POWERnSEALPS (EBT) /NITOSEALPS200(Fosroc)/ZORISEAL PS(PMCC) / SIKA

WATER SUPPLY ITEMS Constructing 904.0 mm (3 feet) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; 0.5 inch thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm ( 3 feet ) in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads and contractors profit etc., complete for finished item of work as per Standard specification. Manhole

Constructing 457.2 mm x 457.2 mm brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm ( 3 feet )and fitted with light weight 457.2 mm x 457.2 mm C.I frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads and contractors profit etc., complete for finished item of work as per Standard specification. Manholes

Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with P or S trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads and contractors profit etc., complete for finished item of work. Orissa pan

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with S trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads and contractors profit etc., complete for finished item of work for all floors. European water closet

Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/Senior/Nice or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 400 gms Seiko or equivalent , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads and contractors profit for finished item of work Flat Back Wash Hand Basin

Supplying and fixing NP soap dish heavy type of approved make ISI quality with NP screws etc., complete including cost and conveyance of all materials, labour charges for fixing , overheads and contractors profit for finished item of work in all floors NP soap dish heavy type

Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x457.2mm plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads and contractors profit for finished item of work in all floors. Tv Shape Mirror

Supplying and fixing of 19.04mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , overheads and contractors profit for finished item of work. aluminium anodized

Supplying and fixing 12.70mm dia NP push cock as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads and contractors profit complete for finished item of work in all floors. Np push cock

Supplying and fixing NP bib taps of size 12.70mm dia of Indian make heavy duty as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads and contractors profit complete for finished item of work in all floors. NP bib taps of size 12.70mm dia

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads and contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 and 1326) 75 mm dia pipe

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads and contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 and 1326) 110 mm dia pipe

Ornamental Brick Masonry in C.M(1:5) mix using II nd class bricks well burnt from any kiln, inclusive of brick bots, and madras terrace bricks, including cost and conveyance of all materials, labour charges, scaffolding charges, and curing etc., complete complying of standard specifications and as directed during execution of work for one Cu.m including cost and conveyance of all materials to site, labour charges, overheads and contractors profit complete for finished item of work

Ornamental Plastering 1 inch to 1 1/4 inch thick base plastering in C.M(1:3) mix 20mm thick and top plastering with C.M (1:3) mix 12mm thick, to bring requred ornamentation inclusive of fine rendering neatly with cemnt, as per drawing including cost and conveyance of all materials, labour charges and curing etc., complete. To the requried shape ans size as per the approved Drawing and as per silpi Norms - 10 Sq.m Special Class

Ornamental Plastering 1 inch to 1 1/4 inch thick base plastering in C.M(1:3) mix 20mm thick and top plastering with C.M (1:3) mix 12mm thick, to bring requred ornamentation inclusive of fine rendering neatly with cemnt, as per drawing including cost and conveyance of all materials, labour charges and curing etc., complete. To the requried shape ans size as per the approved Drawing and as per silpi Norms - 10 Sq.m First Class

Ornamental Plastering 1 inch to 1 1/4 inch thick base plastering in C.M(1:3) mix 20mm thick and top plastering with C.M (1:3) mix 12mm thick, to bring requred ornamentation inclusive of fine rendering neatly with cemnt, as per drawing including cost and conveyance of all materials, labour charges and curing etc., complete. To the requried shape ans size as per the approved Drawing and as per silpi Norms - 10 Sq.m Second Class

Providing Pancha colour paint two coats over promary coat to vigrahams or columns with best synthetic enamel paint (apco Ligt asain?brazer make) ap per approved matching colour including cost and conveyance of all materials labour charges brusing etc,complete (as per standards) -10Sqm Pancha Colour