Endowments Department Tender

Filling foundation trenches with good carted sand from approved quarry in layers not exceeding 150 cm, watering and ramming including cost and conveyance of water to worksite and all operational,incidental, labour charges etc., complete for finished item of work.

Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX

Random Rubble Stone masonry in CM (1:6) prop: (cement : sand) using hard Granite stones from approved quarry including cost and conveyance of all materials like cement, sand water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape, mixing of cement, mortar, construction, scaffolding charges, curing etc., complete for finished item of work in foundation & basement. (APSS No. 615 & 601)

Filling with Morum in basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work (APSS NO.309&310)

Supplying, fitting and placing HYSD (Fe 415/ tmt grade as per IS 1786-1985) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work

VRCC M20 Nominal Mix corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges and all other taxes on all materials including steel centering, shuttering, machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403)

For plinth beam all round

For Lintel beam all round

For slabs

Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Brick Masonry in CM 1:8 (Country)

Brick masonry 115 mm thick for partition walls in super structure, parapet walls with cement mortar (1:3) prop (Cement:sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work

Plastering 20mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)

Supplying fabrication and erection of MS Trusses with medium quality various MS-Square hollow section for coloumn and purlins etc., including cost and conveyance of all materials to site with taxes and duties and labour charges for cutting, placing , welding and erection etc complete for finished item of work.

Manufacturing supplying and fixing of MS window grills and compound wall gates by using MS tubes, angles and square rods as per approved designs and drawings including fixing in position, cost conveyance of all materials and labour charges for finished item of work.

Painting to new walls with 2 coats of Acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. (Exterior) of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for walls Plastic emulsion paint - 2 Coats + 1 coat primer

Painting with synthetic enamel paint of approved color and brand two coats over primary coat total 3 coats) to the new Iron & Wood work, including cost and conveyance of all materials, labour charges etc.., complete 2 Coats + 1 coat primer

Flooringwith Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs ceramic tiles, set over base coat of cement mortar(1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @3.3. kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Providing Dadooing / Skirting to internal Walls to 15cms height / raisers of steps with glazed red or white full body ceramic wall tiles of size 200 x 300 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of approved make set over 12mm thick in CM (1:4) base coat and neat grey cement slurry of honey like consistency at the rate of 3.3 Kgs per Sq.mt and jointed with white cement paste mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials and water to work site including sales and other taxes on all materials, cost of base coat, all operational, incidental and labour charges such as mixing mortar, fixing in position, including lift charges, curing, cleaning the surface etc., complet e but excludingSeigniorage charges for finished item of work (APSS No.701)

Supply of Pre-painted Galvalume Trapezoidal Profile Roofingsheets with 0.5mm thickness, Coating: Alu-Zinc coating AZ150GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified,Polyester painting. Painting Thickness (Top): 18 to 20 Microns,(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum12 Meters with Regular Range Colours

Providing and fixing28 -30 MM thicksolidWoodPolymerComposite(WPC)single extruded door shutter with 3MMtop and bottom rigid layer with an overalldensity of 750kg/Cum. It will be fixed tothe frame using 3 inch /4 inch hinges. Aminimum of 4 hinges will be required forfixingthe doorwith the frame Complete.

Providing and fixing factory made solidWood Polymer Composite (WPC) single extruded Door Framesection of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have are bat of 32MM Door Frame section of 45x90 MM . The two Vertical members are to be joined together with the horizontal member using 8x60 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Gronolithik Concrete Flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete, excluding seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials(83)

Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work.

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.