Endowments Department Tender

Filling foundation trenches with good carted sand from approved quarry in layers not exceeding 150 cm, watering and ramming including cost and conveyance of water to worksite and all operational,incidental, labour charges etc., complete for finished item of work.

Plain Cement Concrete 1:4:8 proportion nominal mix (cement: fine aggregate: Coarse aggregate for foundation levelling courses and below flooring beds using 40mm size SS5 hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. APSS No. 402 for:-Machine Mix-PCC 1:4:8 NOMINAL MIX

Random Rubble Stone masonry in CM 1:6 prop: cement : sand using hard Granite stones from approved quarry including cost and conveyance of all materials like cement, sand water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape, mixing of cement, mortar, construction, scaffolding charges, curing etc., complete for finished item of work in foundation & basement. APSS No. 615 and 601

Filling with Morum in basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work APSS NO.309 and 310

Supplying, fitting and placing HYSD Fe 415/ tmt grade as per IS 1786-1985 bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work

VRCC M20 Nominal Mix corresponding to table 9 of IS456 using 20mm size graded machine crushed hard granite metal Coarse aggregate from approved quarry including cost and conveyance of all materials like cement, fine aggregate Sand, coarse aggregate, water etc., to site and cost of seigniorage charges and all other taxes on all materials including steel centering, shuttering, machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work APSS No. 402 and 403

For footings

For plinth beam all round

for lintel beam all round

Flooringwith Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 Parts 1 to 15 of any colour and finish in all shades and signs ceramic tiles,set over base coat cement mortar 1:8,12mm thic kover CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread at 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Providing Dadooing / Skirting to internal Walls to 15cms height / raisers of steps with glazed red or white full body ceramic wall tiles of size 200 x 300 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of approved make set over 12mm thick in CM (1:4) base coat and neat grey cement slurry of honey like consistency at the rate of 3.3 Kgs per Sq.mt and jointed with white cement paste mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials and water to work site including sales and other taxes on all materials, cost of base coat, all operational, incidental and labour charges such as mixing mortar, fixing in position, including lift charges, curing, cleaning the surface etc., complet e but excludingSeigniorage charges for finished item of work (APSS No.701)

Brick masonry 230 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Brick Masonry in CM 1:8 (Country)

Brick masonry 115 mm thick for partition walls in super structure, parapet walls with cement mortar (1:3) prop (Cement:sand) using Bricks second class or ground moulded (Non-Modular or traditional size) 23 x 11 x 7 cm from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of excluding seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work

Plastering 20mm thick in CM (1:4) finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for External & Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work. (SS 901,903 & 904) for:-Plastering in CM (1:4) 20 mm

Plastering 12mm thick in CM (1:4) finishing including cost and conveyance of all materials like cement, sand, water etc., to site, excluding seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for External & Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work. (SS 901,903 & 904) for:-Plastering in CM (1:4) 12 mm

Supplying fabrication and erection of MS Trusses with medium quality various MS-Square hollow section for coloumn and purlins etc., including cost and conveyance of all materials to site with taxes and duties and labour charges for cutting, placing , welding and erection etc complete for finished item of work.

Manufacturing supplying and fixing of MS window grills and compound wall gates by using MS tubes, angles and square rods as per approved designs and drawings including fixing in position, cost conveyance of all materials and labour charges for finished item of work.

Painting to new walls with 2 coats of Acrylic emulsion paint weather proof water-based, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter. (Exterior) of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for walls Plastic emulsion paint - 2 Coats + 1 coat primer

Painting with synthetic enamel paint of approved color and brand two coats over primary coat total 3 coats) to the new Iron & Wood work, including cost and conveyance of all materials, labour charges etc.., complete 2 Coats + 1 coat primer

Supply of Pre-painted Galvalume Trapezoidal Profile Roofingsheets with 0.5mm thickness, Coating: Alu-Zinc coating AZ150GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified,Polyester painting. Painting Thickness (Top): 18 to 20 Microns,(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum12 Meters with Regular Range Colours

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108

Providing and fixing factory made uPVC white colour sliding glazed doorcomprising of uPVC multi- chambered frame with in-built roller track andsash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanizedmild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVCextruded glazing beads, uPVC extruded interlock and uPVC extrudedInline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy(white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmissiongear with keeps, zinc alloy (white powder coated) cresent lock (ifrequired), stainless steel (SS 304 grade) body with adjustable doublenylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cut and fusion weldedat all corners, including drilling of holes for fixing hardware's and drainageof water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backerrod of required size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes,wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variationin profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Two track two panels sliding door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thicknessof 2.3 ± 0.2 mm and single glazing bead / double glazingbead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)