Dr Yashwant Singh Parmar University Of Horticulture And Forestry Tender

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Supply and fixing of MS-L angles as fencing poles 50mm x 50mm x 5mm including fabrication charges, placing in position etc., straining and fixing to any type of standard, rails, straining bolts, including securing with overheads and contractor profit for finished item of work.

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Supply and fixing of Hot dipped Galvanised iron chain linkmesh 8 gauge-(4.0mm) as per IS:2721-1979:3"x3" (76mm x 76mm)-8Gauge including cost and conveyance of all materials and labour charges with binding wire fixing in position by digging to a depth of (21/2" x 21/2") in to ground embedded the mesh as directed by the department-1 Sqm and overheads & contractors profit complete for finished item of work. Make-Tata

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to L angulars including all labour charges, overheads and contractor profit complete for finished item of work

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Footings: Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials , centering using Steel Scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Columns: Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials , centering using Steel Scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Supply and fixing G.I tubes for gate including labour charges for cutting,fabrication and fixing to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of G.I. pipes incl. all wastages and all incidental, operational, labour charges including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over primer coat of zinc chromate yellow oxide to new iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Supply and fixing of Hot dipped Galvanised iron chain linkmesh 8 gauge-(4.0mm) as per IS:2721-1979:3"x3" (76mm x 76mm)-8Gauge including cost and conveyance of all materials and labour charges with binding wire fixing in position by digging to a depth of (21/2" x 21/2") in to ground embedded the mesh as directed by the department-1 Sqm and overheads & contractors profit complete for finished item of work. Make-Tata

PROVIDING INTERNAL FEICING AT BRS, PULIVENDULA, KADAPA DISTRICT;Supplying and fixing galvanised steel barbed wire (IS : 278-1962 Type I) weighing 9.38 Kg per 100 metres (min.), Straining and fixing to L angulars including all labour charges, overheads and contractor profit complete for finished item of work