Dr Yashwant Singh Parmar University Of Horticulture And Forestry Tender

Providing cupboards and mesh shutters to BC type staff quarters at University Campus, Dr.YSRHU, V.R;Providing cupboard shutters to the existing cupboard using 9 Ply - 12 mm thick both sides teak veneer decorated Plywood of make geenply /century ply or equvalent of colour and shade as approved by the Engineer-in charge, for alround frame of 100mm and sides hinges suppor frame of 50mm wide and providing 4Nos of shutters at bottom as per site requirement duly providing 1mm-0.8mm th PVC Edge band (glossy finish) fixed with Heatx alround the exposed edges of plywood for frame and shutters including providing powder coated aluminium track of matching shade for 5mm thick sliding glass shutters 2Nos, with glass runners of 4 Nos. on the track and fixing the plywood shutters with 8Nos. of soft autoclosing hinges (0/8 crank) (make Godrej interio or equivalent), providing 150mm long 4Nos. of SS handels, of standard make and model as approved by the Engineer-in charge, including cost and conveyance of all materials to site, Labour charges for making, fabricating cup-board shutters with laminated ply-wood including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, and fixing in position with necessary screws as per the plan and directions of Engineer-in charge, over heads and contractor profit etc., complete for finished item of work of size 1.65mx2.15m

Providing cupboards and mesh shutters to BC type staff quarters at University Campus, Dr.YSRHU, V.R;Providing cupboard shutters to the existing cupboard using 9 Ply - 12 mm thick both sides teak veneer decorated Plywood of make geenply /century ply or equvalent of colour and shade as approved by the Engineer-in charge, for alround frame of 100mm and sides hinges suppor frame of 50mm wide and providing 2Nos of shutters at bottom as per site requirement duly providing 1mm-0.8mm th PVC Edge band (glossy finish) fixed with Heatx alround the exposed edges of plywood for frame and shutters including providing powder coated aluminium track of matching shade for 5mm thick sliding glass shutters 2Nos, with glass runners of 4 Nos. on the track and fixing the plywood shutters with 4Nos. of soft autoclosing hinges (0/8 crank) (make Godrej interio or equivalent), providing 150mm long 2Nos. of SS handels, of standard make and model as approved by the Engineer-in charge, including cost and conveyance of all materials to site, Labour charges for making, fabricating cup-board shutters with laminated ply-wood including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, and fixing in position with necessary screws as per the plan and directions of Engineer-in charge, over heads and contractor profit etc., complete for finished item of work of size 1.70mx2.15m

Providing cupboards and mesh shutters to BC type staff quarters at University Campus, Dr.YSRHU, V.R;Providing cupboard shutters to the existing cupboard using 9 Ply - 12 mm thick both sides teak veneer decorated Plywood of make geenply /century ply or equvalent of colour and shade as approved by the Engineer-in charge, for alround frame of 100mm and sides hinges suppor frame of 50mm wide and providing 3Nos of shutters at bottom and 3 Nos of shutters at top as per site requirement duly providing 1mm-0.8mm th PVC Edge band (glossy finish) fixed with Heatx alround the exposed edges of plywood for frame and shutters including fixing the plywood shutters with 15Nos. of soft autoclosing hinges (0/8 crank) (make Godrej interio or equivalent), providing 200mm long 6Nos. of SS handels, 2 Nos. of locks of standard make and model as approved by the Engineer-in charge, including cost and conveyance of all materials to site, Labour charges for making, fabricating cup-board shutters with laminated ply-wood including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, and fixing in position with necessary screws as per the plan and directions of Engineer-in charge, over heads and contractor profit etc., complete for finished item of work of size 2.05mx2.90m

Providing cupboards and mesh shutters to BC type staff quarters at University Campus, Dr.YSRHU, V.R;Providing cupboard shutters to the existing cupboard using 9 Ply - 12 mm thick both sides teak veneer decorated Plywood of make geenply /century ply or equvalent of colour and shade as approved by the Engineer-in charge, for alround frame of 100mm and sides hinges suppor frame of 50mm wide and providing 4Nos of shutters at bottom and 4Nos of shutters at top as per site requirement duly providing 1mm-0.8mm th PVC Edge band (glossy finish) fixed with Heatx alround the exposed edges of plywood for frame and shutters including providing powder coated aluminium track of matching shade for 5mm thick sliding glass shutters 4Nos, with glass runners of 8 Nos. on the track and fixing the plywood shutters with 16Nos. of soft autoclosing hinges (0/8 crank) (make Godrej interio or equivalent), providing 150mm long 8Nos. of SS handels, of standard make and model as approved by the Engineer-in charge, including cost and conveyance of all materials to site, Labour charges for making, fabricating cup-board shutters with laminated ply-wood including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, and fixing in position with necessary screws as per the plan and directions of Engineer-in charge, over heads and contractor profit etc., complete for finished item of work of size 2.60mx2.90m

Providing cupboards and mesh shutters to BC type staff quarters at University Campus, Dr.YSRHU, V.R;Providing cupboard shutters to the existing cupboard using 9 Ply - 12 mm thick both sides teak veneer decorated Plywood of make geenply /century ply or equvalent of colour and shade as approved by the Engineer-in charge, for alround frame of 100mm and sides hinges suppor frame of 50mm wide and providing 6Nos of shutters at bottom as per site requirement duly providing 1mm-0.8mm th PVC Edge band (glossy finish) fixed with Heatx alround the exposed edges of plywood for frame and shutters including fixing the plywood shutters with 12Nos. of soft autoclosing hinges (0/8 crank) (make Godrej interio or equivalent), providing 150mm long 6Nos. of SS handels, of standard make and model as approved by the Engineer-in charge, including cost and conveyance of all materials to site, Labour charges for making, fabricating cup-board shutters with laminated ply-wood including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing locks, and fixing in position with necessary screws as per the plan and directions of Engineer-in charge, over heads and contractor profit etc., complete for finished item of work of size 3.20mx0.75m

Providing cupboards and mesh shutters to BC type staff quarters at University Campus, Dr.YSRHU, V.R;Providing sliding glass shutters to the existing cupboard using 9 Ply - 12 mm thick both sides teak veneer decorated Plywood of make geenply /century ply or equvalent of colour and shade as approved by the Engineer-in charge, for alround frame of 100mm and sides track suppor frame of 50mm wide and providing 4Nos of glass sliding shutters at top and bottom as per site requirement duly providing 1mm-0.8mm th PVC Edge band (glossy finish) fixed with Heatx alround the exposed edges of plywood for frame including providing powder coated aluminium track of matching shade for 5mm thick sliding glass shutters 4Nos, with glass runners of 8 Nos. on the track and providing 12mm thick toughend glass racks 30nos of size 150mm x 250mm using brackets of 60nos, of standard make and model as approved by the Engineer-in charge, including cost and conveyance of all materials to site, Labour charges for making, fabricating cup-board frame with laminated ply-wood including fixing cutting, making, assembling, fixing hinges, fixing fixtures, and fixing in position with necessary screws as per the plan and directions of Engineer-in charge, over heads and contractor profit etc., complete for finished item of work of size 2.30mx2.10m

Providing cupboards and mesh shutters to BC type staff quarters at University Campus, Dr.YSRHU, V.R;Supply and fixing mesh door with powder coated aluminium sections of 50.80mm x 25.40mm , 3.00 mm thick for both horizontal and verticals, rubber beading, including supply and fixing ISI marked powder coated aluminium fixtures 4Nos Butt Hinges 100mm long and 2 Nos.tower bolts 100mm, 2 Nos.alluminium handles (IS:208) 150mm, SS Mesh and 5mm thick hylam sheet at bottom portion 0.45m height, including labour charges for manufacturing mesh door as per the plan and directions of Engineer-in charge, over heads and contractor profit etc., complete for finished item of work. (The Aluminium section used shall be standard make confirming to IS 1948 ? 1961) and as approved by the Engineer).