Directorate General Of Lighthouses And Lightships Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Directorate General Of Lighthouses And Lightships - DGLL Tender
Other Consultancy Services
Consultancy Services
Eprocure
Opening Date28 Feb 2023
Closing Date16 Mar 2023
Tender Amount₹ 69,86,855
Costs
EMD
₹ 1,39,800Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_DGLL_743059_1Bid Award Id
ViewTender No
MT-VSP-02002(13)/1/2023-MaintTender Authority
Directorate General Of Lighthouses And Lightships ViewPurchaser Address
-Website
http://http://www.dgll.nic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing & fixing of Four seat seesaw VH401KB - blue, Technical specifications :- Product code : VH-401KB-10, Weight : 60.4 kg, Recommended age : 2-10 years, Free fall height : 1 m, Load capacity : 216 kg, Maximum number of users : 4, Measurements : 3.68 x 0.29 x 0.88 m, and Required area for assembly : 6.7 x 2.3 m and Fixing of vertical poles in PCC 1:2:4 with adding water proof compound into the concrete, complete all as per direction of Engineer-in-Charge and as per standards and Including supply of all material,labours,transportation, lead & Lift, tools & plants and all other charges etc., complete.
1
-
-
... More
Providing & fixing of Red rocking dog stock, as per image and Fixing of vertical poles in PCC 1:2:4 with adding water proof compound into the concrete, complete all as per direction of Engineer-in-Charge. Including supply of all material,labours,transportation, lead & Lift, tools & plants and all other charges etc., complete.
2
-
-
... More
Construction of 4 m Dia Circular Gazebo with Platform including supply & fabrication of framed structure with Flange, Nut & Bolt arrangement with GI pipes, Hollow tube section, angles, Flats and 1.5 mm thk Plain GS Roof sheet. Size of Gazebo platform will be 4m Dia x 1.2m (depth) out of which foundation depth is 0.65 m and above ground level will be 1.20 m with curve shaped entrance steps (2.50 m length) of brickwork with decorative anti skid tiles for flooring & steps. The foundation work will include Earth work in excavation, Stone pitching, PCC 1:3:6, brick wall all round periphery, providing & laying anti skid tiles complete all as per drawing and standard specifications and as directed including cost of all material, labours, transportation, lead & lift, tools & plants and all other charges etc., complete.
3
-
-
... More
Providing & fixing of Modern 3 Seater Granite Stone Park Bench With Back Material:Granite Stone Seating Capacity: 3 Seater, Backrest: With Backrest, Armrest: Without Arm Rest, Length: 4.5', Width: 1.5', Seating Height: 1.5' Appearance: Footrest: Without Foot Rest, Load Capacity: 300 KG, I Usage/Application: Garden and Shape: Rectangular, complete all as per direction of Engineer-in-Charge. Including supply of all material,labours,transportation, lead & Lift, tools & plants and all other charges etc., complete.
20
-
-
... More
Plantation: Excavation of area 2ft x 2ft x 2ft, cleaning the hole and filling the hole with ready soil mix, supply and plantation of water resistant plants suitable for saline environment, spreading of manure all round the plant along with proper watering complete all as per direction of Engineer-in-Charge including supply of all material, labours, transportation, lead & Lift, tools & plants and all other charges etc., complete.
75
-
-
... More
Supply and installation of street light poles with light fittings and cabling including the civil work for foundation as per drawing.
20
-
-
... More
PART-B (Water Fountain)
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) for all kinds of soil including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge
5.41
-
-
... More
Extra rates for quantities of works, executed: 2.24.1 In or under water and/or liquid mud, including pumping out metre 20% water as required Note for item no. 2.24.1:- The extra percentage rate is applicable in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level up to the centre of gravity of the qty executed in difficult conditions. The depth shall be reckoned correct to 0.10 m, 0.05 m or more shall be taken as 0.10 m and less than 0.05 m ignored.
1.2
-
-
... More
Providing & Laying of Dry stone pitching 225 mm thick under floors, ramps,septic tank as per drawing and wherever directed with approved quality stone, by proper hand packing, consolidation by rolling/ramming as required filling interstices with spalls and Gravel/moorum all as per standard specifications and as directed, consolidating to required gradient and camber, watering including cost of all labour, materials, tools and plants, safety measures and all other charges etc., complete.
9.08
-
-
... More
Providing and laying in position Cement Concrete in foundation bed with 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) All work up to plinth level including mixing,laying, compacting with flat/needle vibrator, curing as directed by the engineer in charge including cost of all materials, labours, tools & plants,curing,safety measures and all other charges etc., complete.
0.91
-
-
... More
Providing and laying 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) in position specified grade of reinforced cement concrete with adding of admixture and dosage as per manufacture specification including mixing,laying, compacting with flat/needle vibrator, curing and as directed by the engineer in charge including cost of all materials, labours, tools & plants,curing,safety measures and all other charges etc., complete.
3.89
-
-
... More
Providing Steel reinforcement Fe-500D of approved brand for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level of tested Tor steel reinforcement of approved 1st quality as per drawing and as directed at all heights including cost of all labour, materials, tools & plants,safety measures and all other charges etc., complete.
467.28
-
-
... More
Providing of Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete, Suspended floors, roofs, landings, balconies and access platform, Columns, Pillars, Piers, Abutments, Posts and Struts and Stairs, including cost of all labour, materials, tools & plants ,safety measures and all other charges etc., complete.
19.47
-
-
... More
Providing and laying water proofing treatment for Water fountain etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
29.61
-
-
... More
12 mm cement plaster 1:3 (1 cement: 3 fine sand) and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers. 50kg cement used as per manufacture specification for circular works finished with a floating coat of neat cement of mix as per standard specification and as directed at site including supply of all material,labours,scaffolding,curing, tools & plants,safety measures and all other charges etc., complete.
29.61
-
-
... More
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:
29.61
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
2.67
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
5.41
-
-
... More
Electrical Works
-
-
-
... More
Providing & fixing of 3 HP Three phase open well submersible pump fountain Model, complete all as per direction of Engineer-in-Charge. Including two or more coats of SE Paint over a priming coat, supply of all material, labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Providing & fixing of Outdoor Control panel box , complete all as per direction of Engineer-in-Charge including two or more coats of SE Paint over a priming coat, supply of all material, labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Providing & fixing of 10' Diameter G.I. Ring with 60 Nos. Socket welded , complete all as per direction of Engineer-in-Charge. Including two or more coats of SE Paint over a priming coat, supply of all material, labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Providing & fixing of 5' Diameter G.I. Ring with 44 Nos. Socket welded , complete all as per direction of Engineer-in-Charge. Including two or more coats of SE Paint over a priming coat, supply of all material, labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Providing & fixing of Brass adjustable Ring Nozzle for fountain, complete all as per direction of Engineer-in-Charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.
50
-
-
... More
Providing & fixing of 1" Brass Centre Jet Nozzle for Fountain , complete all as per direction of Engineer-in-Charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Providing & fixing of Interconnecting PVC Pipe fittings with Control valve for fountain, complete all as per direction of Engineer-in-Charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Providing & fixing of RGB Under water LED Light for Fountain, complete all as per direction of Engineer-in-Charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.
8
-
-
... More
Providing & fixing of SMPS & Controller for fountain model, complete all as per direction of Engineer-in-Charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Providing & fixing of Solenoid valve Fountain model, complete all as per direction of Engineer-in-Charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.
5
-
-
... More
Providing & fixing of Solenoid Controller Fountain model, complete all as per direction of Engineer-in-Charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Providing & fixing of 2.5 Sqmm 3core underwater copper flat cable, complete all as per direction of Engineer-in-Charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.
25
-
-
... More
Providing & fixing of 1.0 Sqmm 4 Core underwater copper round cable, complete all as per direction of Engineer-in-Charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.
100
-
-
... More
Providing & fixing of Ring stand, Light stand, Electrical & hardware fitting, complete all as per direction of Engineer-in-Charge. Including supply of all material, labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Installation, commissioning & transportation of all equipments for related to water fountain including the cost of all labour, cranes, loading & unloading, transportation, tools & plants, Lead & lift at all heights and other charges etc.
1
-
-
... More
PART-C (Toilet Block)
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) for all kinds of soil including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge
129.5
-
-
... More
Extra rates for quantities of works, executed: 2.24.1 In or under water and/or liquid mud, including pumping out metre 20% water as required Note for item no. 2.24.1:- The extra percentage rate is applicable in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level up to the centre of gravity of the qty executed in difficult conditions. The depth shall be reckoned correct to 0.10 m, 0.05 m or more shall be taken as 0.10 m and less than 0.05 m ignored.
2.3
-
-
... More
Providing & Laying of Dry stone pitching 225 mm thick under foundation/floors, ramps,septic tank as per drawing and wherever directed with approved quality stone, by proper hand packing, consolidation by vibratory road rolling/ramming as required filling interstices with spalls and Gravel/moorum all as per standard specifications and as directed, consolidating to required gradient and camber, watering including cost of all labour, materials, tools and plants, safety measures and all other charges etc., complete.
45.69
-
-
... More
Providing and laying in position Cement Concrete in foundation bed with 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) All work up to plinth level including mixing,laying, compacting with flat/needle vibrator, curing as directed by the engineer in charge including cost of all materials, labours, tools & plants,curing,safety measures and all other charges etc., complete.
8.73
-
-
... More
Providing and laying 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) in position specified grade of reinforced cement concrete with adding of admixture and dosage as per manufacture specification including mixing,laying, compacting with flat/needle vibrator, curing and as directed by the engineer in charge including cost of all materials, labours, tools & plants,curing,safety measures and all other charges etc., complete.
-
-
-
... More
a) Upto Plinth level
6.54
-
-
... More
b) Above plinth level
6.28
-
-
... More
c) Providing Steel reinforcement Fe-500D of approved brand for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level of tested Tor steel reinforcement of approved 1st quality as per drawing and as directed at all heights including cost of all labour, materials, tools & plants,safety measures and all other charges etc., complete.
1539
-
-
... More
Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar as per drawing and as directed at all heights including cost of all labour, materials, tools & plants,curing,safety measures and all other charges etc., complete.
-
-
-
... More
a) upto plinth level with Cement mortar 1:4 (1 cement :4 coarse sand)
11.07
-
-
... More
b) Above plinth level upto floor V level with Cement mortar 1:4 (1 cement :4 coarse sand)
10.76
-
-
... More
c) Half brick masonry with Cement mortar 1:3 (1 cement :3 coarse sand)
20.76
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m direction of Engineer-in-charge. including cost of all materials, labours, tools & plants and all other charges etc., complete.
129.5
-
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm for under floors, in required thickness, consolidation by vibratory road rolling/ramming, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3.87
-
-
... More
CEMENT PLASTER
-
-
-
... More
a) 20 mm thick Cement plaster 1:4 (1 cement: 4 coarse sand) for exterior surfaces of brick masonry and Concrete surfaces plastering up to floor two level including finishing for smooth and even all as per standard specification and as directed at site including supply of all material,labours,scaffolding,curing, tools & plants,safety measures and all other charges etc., complete.(Exterior surfaces).
90.66
-
-
... More
b) 15 mm thick cement plaster with CM 1:4 of brick masonry surfaces and Concrete surfaces for Interior plastering for walls as per standard specification and as directed at site including supply of all material, labours, scaffolding, curing, tools & plants,safety measures and all other charges etc., complete.(Interior Surfaces)
113.39
-
-
... More
c) 12 mm thick plastering for ceiling surfaces with CM 1:4 (1 cement: 4 coarse sand) for Interior plastering all as per standard specifications and as directed at site including supply of all material,labours,scaffolding,curing, tools & plants,safety measures and all other charges etc., complete.(Ceiling surfaces, for septic tank)
30.52
-
-
... More
d) 6 mm cement plaster 1:3 (1 cement : 3 fine sand) for R.C.C. slabs including supply of all material, labours, scaffolding, curing, tools & plants,safety measures and all other charges etc., complete. (On top of Roof slab, plinth protection)
40.23
-
-
... More
e) Providing and laying water proofing treatment etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
43.94
-
-
... More
Providing of Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete, Suspended floors, roofs, landings, balconies and access platform, Columns, Pillars, Piers, Abutments, Posts and Struts and Stairs, including cost of all labour, materials, tools & plants ,safety measures and all other charges etc., complete.
-
-
-
... More
a) Foundations, footings, bases of columns, etc. for mass concrete
26.42
-
-
... More
b) Columns, Pillars, Piers, Abutments, Posts and Struts.
27.16
-
-
... More
c) Lintels, beams, plinth beams, girders, bressumers and cantilevers
45.34
-
-
... More
d) Suspended floors, roofs, landings, balconies and access platform.
29.74
-
-
... More
Providing & fixing of WPC/PVC Frames and Shutters for doors and Ventilator
-
-
-
... More
a) Providing and fixing Frame size 65 x 100 mm factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.
20.8
-
-
... More
b) Providing and fixing 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
3.36
-
-
... More
c) Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
15
-
-
... More
d) Providing and fixing factory made 30 mm thick Non decorative finish door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.
5.04
-
-
... More
Providing & fixing 5.5 mm thick glass louver panes with putty and glazing clips in steel doors, windows, clerestory windows,ventilator,louvers all complete . including cost of all materials, labours, tools & plants,safetty measures and all other charges etc., complete.
1.8
-
-
... More
Providing of fittings & fixtures for doors of heavy duty with C.P. brass screws and as directed including cost of all materials, transportation, labour, tools & plants and all other charges etc. complete.
-
-
-
... More
a) Providing and fixing 300x16x5 mm bright finished brass door latch (Aldrop)
10
-
-
... More
b) Providing and fixing bright finished 250x10 mm brass tower bolts (barrel type)
4
-
-
... More
c) Providing and fixing bright finished 250x10 mm aluminium tower bolts
3
-
-
... More
d) Providing and fixing bright finished 125 mm brass handles
4
-
-
... More
e) Providing and fixing 125 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade.
6
-
-
... More
f) Providing and fixing bright finished 125x85x5.5 mm (heavy type) brass butt hinges
6
-
-
... More
g) Providing and fixing ISI marked 125x75x4 mm aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade.
9
-
-
... More
h) Providing and fixing bright finished brass hanging type floor door stopper.
2
-
-
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge With 2nd class teak wood beading 62X19 mm, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. Including supply of all material,labours, tools & plants and all other charges etc., complete.
1.08
-
-
... More
Providing & laying of Anti- Skid Ceramic floor tiles for Bath and Glazed wall tiles for Toilets
-
-
-
... More
a) Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. including supply of all labours, tools, materials and finishing etc. complete as directed by the engineer in charge.(for Anti skid floor tiles)
16.83
-
-
... More
b) Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Including supply of all material,labours, tools & plants and all other charges etc., complete.
63.45
-
-
... More
Providing and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: for New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including cost of all labour, materials, scaffolding, tools and plants etc., complete.
90.66
-
-
... More
Finishing the walls with Two or more coats on new work for Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :including With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre including cost of all labour, materials, scaffolding, tools and plants,and all other charges etc., complete.
72.78
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.including cost of all labour, materials, scaffolding, tools and plants,and all other charges etc., complete.
-
-
-
... More
a) 20 mm nominal dia Pipes metre 513.75
40
-
-
... More
b) 25 mm nominal dia Pipes
40
-
-
... More
c) 32 mm nominal dia Pipes
15
-
-
... More
d) 40mm dia CPVC Pipe for external work including trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
10
-
-
... More
Providing and fixing (6kgf/cm2) on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.including all fittings & fixtures and as including cost of all labour, materials, tools and plants,and all other charges etc., complete.
-
-
-
... More
a) 110mm Dia including all fittings & fixtures like bend, elbow, union, reducers etc.
50
-
-
... More
b) Single tee with door 110x110x110 mm
6
-
-
... More
c) Single tee without door 110x110x110 mm
6
-
-
... More
d) 75mm Dia including all fittings & fixtures like bend, elbow, union, reducers etc.
40
-
-
... More
e) Single tee with door 75x75x75 mm
10
-
-
... More
f) Single tee without door 75x75x75 mm
10
-
-
... More
Providing and fixing water supply fittings with all necessary fixtures and specials of approved first quality brand/manufacturer,colour (ISI make) as per the following items including cost of all materials, labours, tools & plants and all other charges etc complete.
-
-
-
... More
a) Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock conforming to IS standards and weighing not less than 810 gms.
4
-
-
... More
b) Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.
15
-
-
... More
c) P/F CP Brass Pillar cock
4
-
-
... More
d) Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of conforming to IS:8931.
4
-
-
... More
e) P/F. PVC 15 mm dia Flexible connection pipe for W.Basin.
4
-
-
... More
f) P/F 20 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.
2
-
-
... More
g) P/F 25 mm nominal bore ball valve (brass) of approved quality, High or low
pressure, with plastic floats complete.
2
-
-
... More
h) P/F 40 mm dia non return valve nominal bore
2
-
-
... More
i) P/F CP waste coupling with 32 mm dia pipe
1
-
-
... More
j) Health fauset full set
4
-
-
... More
k) Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
4
-
-
... More
l) 20mm dia PVC gate valve
4
-
-
... More
m) 25mm dia PVC gate valve
4
-
-
... More
n) 32mm dia PVC gate valve
4
-
-
... More
o) 100mm SS Jali
10
-
-
... More
Providing and fixing bath room fittings of approved first quality brand/manufacturer, colour /size with all necessary fixtures including supply of all materials, labours, Screws, tools and all other charges etc., complete.
-
-
-
... More
a) Providing and fixing 600x450 mm beveled edge mirror of superior glass ( Make approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each including supply of all materials, labours, Screws, tools and all other charges etc., complete.
4
-
-
... More
b) Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
8
-
-
... More
c) Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
4
-
-
... More
d) 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
4
-
-
... More
e) Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. including cost of all materials, labours, tools & plants and all other charges etc., complete.(2No tanks each capacity 1000Lit.)
2000
-
-
... More
Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: and all other charges etc., complete.
2
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and all other charges etc., complete.
.
1
-
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
2
-
-
... More
Providing & fixing of Urinals Partition board and G.I clamps complete, including fittings and brackets, cutting and making good the walls and floors wherever required : including supply of all material,labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern,(Make Parryware,hindware) including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.including supply of all material,labours, tools & plants and all other charges etc., complete.
2
-
-
... More
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. including supply of all material,labours, tools & plants and all other charges etc., complete.
1
-
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.Inside dimensions 455x610 mm and 45 cm deep for single pipe line.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. Including supply of all material,labours, tools & plants and all other charges etc., complete.
4
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment including the cost of chemical emulsion including cost of all labour, materials, tools & plants etc., and other charges complete.
-
-
-
... More
a)Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration including supply of all labours, tools, finishing etc. complete as directed by the engineer in charge. using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc., With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. including supply of all materials labours, tools, finishing etc. complete as directed by the engineer in charge.(The work should be done by the approved agency only)
37.44
-
-
... More
For Electrical works
-
-
-
... More
Providing & Fixing of Electric work including supply of all labours, tools, finishing etc. complete as directed by the engineer in charge. (U/G cable from PH to New building, light fittings, wiring cables with pipe etc.,)
1
-
-
... More
Providing & Fixing of Kent RO Water Purifier, Capacity: 10-15 L, Filter Cartridges: Activated Carbon, Installation Type: Wall mounted, Purification Type: RO, UF, TDS Controller, Purifier Type: Electric and Purification Capacity(Per Hour) 15 L/Hr, including supply of all labours, tools, finishing etc. complete as directed by the engineer in charge.
2
-
-
... More
PART-D Plinth wall, Parking Platform and Internal paver block Road
-
-
-
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
900
-
-
... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m for All kinds of soil including level the surface.
4000
-
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness, for all leads & lifts, all complete as per direction of Engineer -in charge.
210
-
-
... More
Dismantling/Demolision including cost of all labours, tools & plants and all other charges etc., complete.
-
-
-
... More
a) Demolishing brick work In cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
2.55
-
-
... More
b) Demolishing cement concrete Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
0.2
-
-
... More
c) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
0.28
-
-
... More
a) Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) for all kinds of soil including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge
157.96
-
-
... More
b) Extra rates for quantities of works, executed: 2.24.1 In or under water and/or liquid mud, including pumping out metre 20% water as required Note for item no. 2.24.1:- The extra percentage rate is applicable in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level up to the centre of gravity of the qty executed in difficult conditions. The depth
shall be reckoned correct to 0.10 m, 0.05 m or more shall be taken as 0.10 m and less than 0.05 m ignored.
1.5
-
-
... More
Supplying and Laying of 63 mm to 45 mm size stone aggregate, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . and as directed by Engineer-incharge. including cost of all labours, tools & plants and all other charges etc., complete.
91.23
-
-
... More
Providing and laying in position Cement Concrete in foundation bed with 1 : 3 : 6 and 1:2:4, All work up to plinth level including mixing,laying, compacting with flat/needle vibrator, curing as directed by the engineer in charge including cost of all materials, labours, tools & plants,curing,safety measures and all other charges etc., complete.
-
-
-
... More
a)Providing and laying in position Cement Concrete in foundation bed with 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) for Gate pillers and Plinth wall towards sea area.
4.98
-
-
... More
b) Providing and laying 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) for CC Road, Parking Platform, pillar coping and Plinth wall coping towards sea area.
10.38
-
-
... More
Providing and laying 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) in position specified grade of reinforced cement concrete with adding of admixture and dosage as per manufacture specification including mixing,laying, compacting with flat/needle vibrator, curing and as directed by the engineer in charge including cost of all materials, labours, tools & plants,curing,safety measures and all other charges etc., complete.
-
-
-
... More
a) Upto Plinth level
1.87
-
-
... More
b) Above plinth level
0.91
-
-
... More
c) Providing Steel reinforcement Fe-500D of approved brand for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth level of tested Tor steel reinforcement of approved 1st quality as per drawing and as directed at all heights including cost of all labour, materials, tools & plants,safety measures and all other charges etc., complete.
277.95
-
-
... More
Painting road surface marking 10cm width New work (Two or more coats)with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous/concrete surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.
16.5
-
-
... More
Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar as per drawing and as directed at all heights including cost of all labour, materials, tools & plants,curing,safety measures and all other charges etc., complete.
-
-
-
... More
a) upto plinth level with Cement mortar 1:4 (1 cement :4 coarse sand)
0.56
-
-
... More
b) Above plinth level upto floor V level with Cement mortar 1:4 (1 cement :4 coarse sand)
1.74
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m direction of Engineer-in-charge. including cost of all materials, labours, tools & plants and all other charges etc., complete.
157.96
-
-
... More
Providing and laying 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.all as per standard specifications and as directed at site including cost of all labour, materials, tools & plants,lift & lead,curing,safety measures etc., complete.
720
-
-
... More
15 mm thick cement plaster with CM 1:3 of brick masonry surfaces and Concrete surfaces for Interior plastering for walls as per standard specification and as directed at site including supply of all material,labours,scaffolding,curing, tools & plants,safety measures and all other charges etc., complete.(Interior Surfaces)
17.53
-
-
... More
6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.(On top of road surface, Parking area)
376.2
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, sides of road and for columns
423.72
-
-
... More
Providing and fixing of GI Main gate & Wicket Gate of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer all as per standard specifications, drawing and as including cost of all materials, labours, tools & plants, fabrication, transportation, lead & Lift and all other charges etc., complete.
100
-
-
... More
Providing and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: for New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including cost of all labour, materials, scaffolding, tools and plants etc., complete.
17.53
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture including cost of all labour, materials, scaffolding, tools and plants etc., complete. (for metal surfaces)
381.55
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements