Department Of Education Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Department Of Education - DoE Tender
Civil And Construction
Opening Date10 Apr 2020
Closing Date8 May 2020
Tender Amount₹ 55,95,062
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 20,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
325755Bid Award Id
ViewTender No
NIT No. 23/APSS/CWs/2020-21, dt. 04.04.2020 of the Executive Engineer, Samagra Shiksha, SPSR.Tender Authority
Department Of Education ViewPurchaser Address
-Website
http://tender.apeprocurement.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Footings.
15.32
-
8435.94
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Pedastals
3.32
-
8905.17
Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
78.71
-
35.56
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Plinth Beam
11.16
-
10699.15
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Columns Ground Floor.
8.62
-
10102.67
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Lintels Ground Floor
2.4
-
10154.93
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Sunshades Ground Floor
1.28
-
11929.38
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Roof Beams Ground Floor
10.35
-
8861.78
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for 125mm thick Roof Slab Ground Floor
19.97
-
8557.29
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for 175mm thick Staire case slab Ground Floor
2.86
-
7778.22
Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work for Ground Floor
154.3
-
411.34
Brick masonry in CM (1:6) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work. for Basement Ground Floor.
36.72
-
5649.64
Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure Ground Floor.
42.85
-
6033.93
20mm thick plain cement mortar bands in cement mortar (1:5) upto 300mm in width including cost and conveyance of all materials and all labour charges etc., complete for walls.
332.96
-
4.62
Ornamental plastering to ceiling with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for Ground Floor
248
-
286.37
Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls for Ground Floor
239.91
-
261.49
Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls for Ground Floor
280.64
-
261.49
Flooring with high polished Granite stone tiles 8mm thick set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work for Ground floor
144.16
-
1900.3
Providing skirting to internal walls to 15 cm height/ risers of steps with Granite stone tiles 8mm thick, length equal to flooring stones set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like granite stone tiles, cement, sand and water etc., complete for finished item of work.
11.17
-
2187.83
Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls for Ground Floor
499.48
-
106.11
Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for Ground Floor
292.91
-
188.56
Painting to new iron works with two coats of synthetic enamel paint of approved brand and shade over one coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work
67.41
-
142.05
Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for bars below 36mm dia. including overlaps and wastage where they are not welded for Ground Floor
6770
-
54.31
Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 no.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Providing and fixing 28-30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work.
5.04
-
5725.2
Providing and fixing of Openable Windows made of prepainted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.
12.15
-
5583.04
Supplying, fitting and placing MS grills with 12mm x 12mm square rods and 25x25x5mm thick angles including cost and conveyance of all materials and all labour charges etc., complete.
413.4
-
80.1
Supply and fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges etc., complete.
64.7
-
81.36
Supply and fixing of 25mm dia 2.2mm thick P.V.C. pipe (ISI Mark) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.
55.16
-
75.96
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.
45
-
474.72
Supply and fixing of 6A 3 pin wall plug socket with a 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
4
-
123.1
Supply and fixing of 16A 3pin flush type switch socket combined (2 in 1) duly recessed in wall with wooden deep box of 6"x8"x21/2" size covered with hylam sheet including earth connections and all labour charges etc., complete.
2
-
368.96
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges etc., complete as per standard data BLD-ELEC-3-1.
50
-
73.78
Supply and run of 1 of 14/0.3mm (1.0 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete as per standard data BLD-ELEC-3-1.
48
-
42.19
Supply and Transportation of 1x40W patty type tube light luminaire with copper choke, starter etc., including 1 No. 40W tube etc., complete.
24
-
301.08
Fixing of 40W tube light luminaire on wall/ ceiling with/ Tw round blocks with all accessories including giving connections and all labour charges etc., complete.
24
-
149.88
Supply of 1200mm (48") Sweep 230V, A.C 50 Hz Ceiling Fan with 3 blades and double ball bearings with all standard accseeories.
10
-
2295.02
Supply of stepped type electronic Regulator excluding seigniorage charges and VAT for finished item of work as per standard schedule of rates ELEC-1.7.1(l).
10
-
204.51
Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
10
-
157.79
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation).
4
-
71.29
Supply and Run of 2 of 2.5 sq. mm WPSC (Weather Proof Single Core) Aluminium cable along with No.10 SWG G.I. bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains
100
-
41.3
Providing independent earthing by excavating a trench to a depth of 2.1M in all soils, as per size specified in the Data, using 40mm dia. 'B' class GI pipe of 2.5 Mtrs Length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
1
-
3920.72
Supply of Integral street light luminaire of 150W HPSV lamp fitting comprises of single piece die cast Aluminium body with copper wound ballast and capacitor, Ignitor, with pot optics including 150W HPSV lamp etc., complete.
5
-
5283.1
Fixing of MV / SV/MH luminaire on wall with 1.0mt 40mm dia GI pipe bracket and anti-tilting MS flat, 2.5 Sq.mm flexible copper cable etc.,including all labour charges for mason work and giving connections etc., complete.
5
-
1098.49
Supply and fixing SPN Distribution board with IP-42 protection (Metal Door) suitable for single phase ELCB / RCCB / DP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface/ flush mounting etc., complete.
1
-
3405.61
Plain Cement Concrete (1:5:10) using 40mm nominal size SS5 hard broken granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work
28.81
-
3712.43
Flooring with high polished Granite stone tiles 8mm thick set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, labour charges for dressing of tiles etc., complete for finished item of work for Ground floor
288.72
-
1900.3
Providing skirting to internal walls to 15 cm height/ risers of steps with Granite stone tiles 8mm thick, length equal to flooring stones set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like granite stone tiles, cement, sand and water etc., complete for finished item of work.
22.11
-
2187.83
Providing and fixing of Openable Windows made of prepainted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm and the outer frame and mullions to have rebate for glazed shutter with a 20 mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, Including 10mm Square guard bars with 6” (152.4mm) pitch etc., complete for finished item of work.
10.8
-
5583.04
Supplying & Fixing 12.7mm NP stop cock Indian make heavy duty including Labour charges (BMW-E.01& E.02))
15
-
253.36
Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap:580mm long including Labour charges (BMW-D.04 & D.06)
3
-
1061.16
Flooring with ceramic non-skid tiles of first quality of make as approved by Engineer-in-charge 7.3mm thick of size 300mm x 300mm over RCC slab / CC bed already laid set over a base coat of CM (1:8) prop 12mm thick including neat cement slurry of honey like consistency spread at the rate of 3.3 kg per sq.m and jointed with neat white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site, including cost of seigeniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work as per (BLD-CSTN-9-6)
6.74
-
820.71
Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 no.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Providing and fixing 28-30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work.
12.6
-
5725.2
Supply and fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges etc., complete.
140
-
81.36
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.
70
-
474.72
Supply and fixing of 6A 3 pin wall plug socket with a 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
14
-
123.1
Supply and fixing of 16A 3pin flush type switch socket combined (2 in 1) duly recessed in wall with wooden deep box of 6"x8"x21/2" size covered with hylam sheet including earth connections and all labour charges etc., complete.
28
-
368.96
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges etc., complete as per standard data BLD-ELEC-3-1.
98
-
73.78
Supply and run of 1 of 14/0.3mm (1.0 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete as per standard data BLD-ELEC-3-1.
96
-
42.19
Supply and Transportation of 1x40W patty type tube light luminaire with copper choke, starter etc., including 1 No. 40W tube etc., complete.
32
-
301.08
Fixing of 40W tube light luminaire on wall/ ceiling with/ Tw round blocks with all accessories including giving connections and all labour charges etc., complete.
32
-
149.88
Supply of 1200mm (48") Sweep 230V, A.C 50 Hz Ceiling Fan with 3 blades and double ball bearings with all standard accseeories.
45
-
2295.02
Supply of stepped type electronic Regulator excluding seigniorage charges and VAT for finished item of work as per standard schedule of rates
45
-
204.51
Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
45
-
157.79
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation).
45
-
71.29
Supply and Run of 2 of 2.5 sq. mm WPSC (Weather Proof Single Core) Aluminium cable along with No.10 SWG G.I. bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains
100
-
41.3
Providing independent earthing by excavating a trench to a depth of 2.1M in all soils, as per size specified in the Data, using 40mm dia. 'B' class GI pipe of 2.5 Mtrs Length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.
2
-
3920.72
Supply and fixing SPN Distribution board with IP-42 protection (Metal Door) suitable for single phase ELCB / RCCB / DP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface/ flush mounting etc., complete.
1
-
3405.61
Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls for Ground Floor
3266.09
-
106.11
Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for Ground Floor
2867.65
-
188.56
Painting to new iron works with two coats of synthetic enamel paint of approved brand and shade over one coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work
540
-
142.05
Painting to new wood works with two coats of approved synthetic enamel paint of approved brand and shade over one coat of wood primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work
369.36
-
151.22
Suppy and Fixing/ Erection of e-3 ceramic magnetic Green Chalk Board of size 8'0" X 4'0" (2.40 X 1.20m) with vitrious enamil coated sheet made up of 0.3 to 0.4 mm thick steel sheet having 0.095 mm thick on top and 0.03 mm min on the back supported with 9mm thick MDF board having bulk density of 750 kg/cum and laminated with 0.25 mm thick electro galvanised steel sheet at the back. Both the top and backing sheet shall be properly fixed with MDF board using suitable adhesive to avoid any moisture absorption. Fixed in deluxe quality aluminium channels conforming to ISI standards including cost, transportation and all labour charges for fixing etc., complete for finished item of work.
18
-
11588.73
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work.
52.2
-
173.7
Plain Cement Concrete (1:5:10) using 40mm nominal size SS5 hard broken granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work
8.89
-
3712.43
Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.
23.27
-
35.56
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Footings.
3.31
-
8435.94
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Pedastals
0.87
-
8905.17
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Columns Ground Floor.
1.74
-
10102.67
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Plinth Beam
3.87
-
10699.15
Brick masonry in CM (1:6) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work. for Basement Ground Floor.
9.22
-
5649.64
Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure Ground Floor.
22.2
-
6033.93
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Lintels Ground Floor
1.36
-
10154.93
Sand filling in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete excluding seigniorage charges for finished item of work.
15.28
-
556.98
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Roof Beams Ground Floor
2.09
-
8861.78
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for 125mm thick Roof Slab Ground Floor
7.85
-
8557.29
Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work for Ground Floor
52.46
-
381.88
Ornamental plastering to ceiling with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for Ground Floor
52.3
-
286.37
Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls for Ground Floor
125.1
-
261.49
Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls for Ground Floor
108.33
-
261.49
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300mm x 300mm and thickness between 7-8 mm and 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work.
32.12
-
820.71
Dadooing to walls with Decorated white back ground glazed tiles 200mm x 152mm 1st. quality of any bramd as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work
126.31
-
539.21
Supplying, fitting and placing MS grills with 12mm x 12mm square rods and 25x25x5mm thick angles including cost and conveyance of all materials and all labour charges etc., complete.
120
-
80.1
Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls for Ground Floor
177.49
-
106.11
Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for Ground Floor
126.27
-
188.56
Painting to new iron works with two coats of synthetic enamel paint of approved brand and shade over one coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work
8.1
-
142.05
Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for bars below 36mm dia. including overlaps and wastage where they are not welded for Ground Floor
2000
-
54.31
Supplying & Fixing Indian Pattern White glazed W.C. 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm long.
4
-
1061.16
Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap.
4
-
1934.86
Supplying & Fixing low down porcelain flushing tank 10 Litre Capacity with internal components.
4
-
2529.07
Supplying and Fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers
4
-
870.29
Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar including wooden block: 450 x 300 mm - Single C.P. Pillar cock.
6
-
1556.53
Supplying and fixing NP bib taps of size 12.70mm dia of indian make seiko including cost and conveyance of all materials and labour charges etc., complete for finished item of work.
8
-
253.36
Supplying & Fixing Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 20 mm NB Size.
2
-
832.8
Providing 75 mm Dia ISI marked PVC down water take pipes with socket, 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, iron/ PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.
29
-
161.33
Providing 110 mm Dia ISI marked PVC down water take pipes with socket, 2.5mm thick 4.0 kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, iron/ PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.
30
-
234.8
Supply and Fixing of Premium make CPVC 22.20 mm OD Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2") Ashirvad Flowgurard SDR 11 and SDR 13.5 for Hot and Cold Water including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.
100
-
131.79
Supply and Fixing of Premium make CPVC 28.30 mm OD Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2") Ashirvad Flowgurard SDR 11 and SDR 13.5 for Hot and Cold Water including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.
150
-
174.97
Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 no.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Providing Wood Polymer Composite (WPC) solid, frostywhite single extruded factory made 2.44 mt x 1.22 mt boards in 18 MM thickness (Density 650 kg/Cum, Weight 35Kg). including labour charges for fixing the frame in position, fixing the board to the frame etc., complete for finished item of work.
14.4
-
4562.15
Supply and fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges etc., complete.
60
-
81.36
Supply and fixing of 25mm dia 2.2mm thick P.V.C. pipe (ISI Mark) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.
60
-
75.96
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.
6
-
474.72
Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges etc., complete as per standard data BLD-ELEC-3-1.
50
-
73.78
Supply and fixing of 6A 3 pin wall plug socket with a 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
6
-
123.1
Supply and Transportation of 1x40W patty type tube light luminaire with copper choke, starter etc., including 1 No. 40W tube etc., complete.
6
-
301.08
Fixing of 40W tube light luminaire on wall/ ceiling with/ Tw round blocks with all accessories including giving connections and all labour charges etc., complete.
6
-
149.88
Supply and fixing SPN Distribution board with IP-42 protection (Metal Door) suitable for single phase ELCB / RCCB / DP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface/ flush mounting etc., complete.
1
-
3405.61
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work.
8.66
-
173.7
Plain Cement Concrete (1:5:10) using 40mm nominal size SS5 hard broken granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work
0.52
-
3712.43
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Footings
0.43
-
8435.94
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Columns
1.34
-
10102.67
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Roof slab 125mm thick
0.35
-
8557.29
Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work for Ground Floor
12.56
-
381.88
Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for bars below 36mm dia. including overlaps and wastage where they are not welded for Ground Floor
1600
-
54.31
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work.
1.37
-
173.7
Plain Cement Concrete (1:5:10) using 40mm nominal size SS5 hard broken granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work
0.55
-
3712.43
Brick masonry in CM (1:6) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work. for Basement Ground Floor.
0.08
-
5649.64
RCM facia 5cm thick in CM (1:3) for drop walls, fins with rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, seigniorage charges, sales & other taxes on all materials, operational & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and form work, lift charges etc., complete for finished items of work but excluding cost of steel & its fabrication charges, for finished item of work. (APSS No.403&903)
2.38
-
1970.86
Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls for Ground Floor
12.2
-
261.49
Dadooing to walls with Decorated white back ground glazed tiles 200mm x 152mm 1st. quality of any bramd as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work
6.36
-
539.21
Supply and Fixing of Premium make CPVC 15.90 mm OD Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2") Ashirvad Flowgurard SDR 11 and SDR 13.5 for Hot and Cold Water including cost and conveyance of all materials, operational & incidental charges including all labour charges for fixing at site etc., for finished item of work.
90
-
95.44
S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931
30
-
253.36
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements