Department Of Agriculture Cooperation And Farmers Welfare Tender

Sodium Hydroxide , Purity Greater than 98% (500 grams x 2)

Syringe filters , Nylon Pore Size -0.45 Micrometer

Conical flask 100ml , 24/29 Joint

Air condenser , B-24/29 Joint

Volumetric flask 5 ml , Borosilicate glass, Interchangeable glass stopper as per class-A Tolerance - Plus or Minus 0.020 ml

Volumetric flask 10 ml , Interchangeable glass stopper as per class-A

Volumetric flask 25ml , Interchangeable glass stopper as per class-A

Micro Pipettes , Micro Pipettes (with 200 tips), For 5-50 MicroLitre Increment Volume (MicroLitre) -1.0 Accuracy (Plus or minus%)- 2.5 Precision (%)-1.5 Compatible tips-200 MicroLitre)

Micro Pipettes , Micro Pipettes (with 500 tips)For 0.5 to 5 ml Increment Volume(MicroLitre)- 100 Accuracy ( Plus or minu%)- 1.5 Precision (%)-0.3 Compatible tips- 5 ml)

Glass vial with cap 2ml capacity , Borosilicate glass

Vortex Machine , Power-32 watt, Shaking movement-orbital, orbital diameter-4 mm, motor type-shaded pole motor,Speed range 0 to 2500 rpm,Dimension(mm) 185 x 150 x 165,power supply 220 to 240 volt

centrifuge tubes 50 ml capacity , (HPLC grade), Polypropylene made

centrifuge , Centrifuge Design Bench top RPM 10000 with load or better RPM Setting Accuracy Plus or minu 5% Ambient operating temperature range in Degree centigrade Celsius and humidity range 0 to 50 Degree Celsius, Relative humidity 15 to 90 % , NO. of accleration and deceleration profile in built for rotor speed while automatic breaking Programmable from 50 to 200 seconds in interval of 5 seconds, Maximum timer set point 60 minutes, Display type LCD, Speed Controller Microprocessor controlled preprogrammed speed controller which can control RPM as well as RCF, Rotor feature with reference to Autoclavability-Autoclave Rotor 121 Degree Celsius, Power supply 230 volts 50Hz AC Plus or Minus10%, Rotor Head- Rotor head with holding capacity 2mL, 10 to 15mL and 50mL centrifuge tubes, Rotor imbalance diagnostics and automative stop if required Yes, Size of rotor supplied with centrifuge 6x 50mL(for angle rotor) RPM 10000 or better, Accessories Spanner to tight or loose nut of rotor on motor shaft head puller, spare rotor nuts, fuse-2, instruction manual book, Installation CD, Auto cut off- Yes, Timer provided- Yes.