Defence Research And Development Organisation Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Defence Research And Development Organisation - DRDO Tender
Eprocure
Opening Date28 Jan 2019
Closing DateCancelled
Tender Amount₹ 1,02,00,00,000
Costs
EMD
₹ 1,12,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_DRDO_436392_1Tender No
83524/CIV/NOAR/CONTender Authority
Defence Research And Development Organisation ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Holes 60cm dia and 60cm deep
1600
-
-
... More
12 mm cement plaster of mix
-
-
-
... More
Automatic PF Improvement Panel
1
-
-
... More
at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.
-
-
-
... More
Supply of Mid back chairs made up of 1.2cm thick hot-pressed plywood for seat and back, upholstered with fabric upholstery covers and moulded polyurethane foam. BACK SIZE : 47.5 cm. (W) with SEAT SIZE : 47.0 cm. (W) x 48.0 cm. (D) The polyurethane foam is moulded with density = 45 ±2 kg/m and hardness = 20 ±2, on hampden machine at 25% compression. The one-piece armrests are injection moulded from black Co-polymer polypropylene.The chair shall have center tilt mechanism. The bellow is 3 piece telescopic type and injection moulded in black polypropylene. The pedestal is injection moulded in balck 30% glass-filled Nylon and fitted with 5 Nos. of Twin wheel castors. The twin wheel castors are injection moulded in 30% glass filled black Nylon etc., complete all as per Model no: BRAVO-FU9U02R of Godrej Make or eqivalents of Wipro/Featherlite/Durian/Ikea.
9
-
-
... More
Supply and fixing of Gun Metal branch pipe 63 mm dia, male and female threaded outlet complete with hexagonal base bore nozzles as per IS 903.
12
-
-
... More
50 X 5mm Galvanised GI strip
100
-
-
... More
Supply of side unit of size 1050 x 450 x 750 mm approved shade with one drawer on sliding guide channels and one openable shutter with shelves, made out of 18 / 12 mm thick commercial plywood with 1mm thick lamination of approved brand and shade for frame / box work, drawers, shelves and shutters and top, exposed internal surfaces finished with 0.60mm thick lamination of approved brand and shade, superior quality brushed steel hardware fittings, locking arrangements, teak wood beading / lamination to all exposed edges,un exposed internal surfaces shall be finished with 2 coats of enamel paint and wood primer including surface preparation etc, complete all as directed.
7
-
-
... More
Supply installation testing & commissioning of starter pannel for the above pump with required cap of 4 pole MCB, capacitor etc in suitable sintex PVS make outdoor box to accommodate all accessories
13
-
-
... More
Main PCC @ Substation - V
1
-
-
... More
Providing maintenance free Earth station with consisting of
12
-
-
... More
Supply of 1200 mm sweep 5 Star rated Ceiling fan with standard down rod, all accessories Electrical connections. Including fixing materials required.
300
-
-
... More
Metering For Each Incomer :
-
-
-
... More
12. Auxilary power : Single phase 220 V 50 cycles A.C.
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
150 mm Dia.
100
-
-
... More
6Way TPNMCBDB with 63A, 100mA 4Pole RCBO as incomer and 15nos 6-25A SPMCBs and 3nos 8KA SP SPDs as outgoings.
14
-
-
... More
Supply, Installation, Testing and Commissioning of Solid 100 mm thick Double Skin Walkable Ceiling panels (with load bearing 300 kg/m2) made up of 0.8 mm thick GI Precoated Sheet (appliance white colour), Infill material PUF ceiling grid withplexi glass , tacky ment,coving, anti static flooring ,pass bos , air curtain and all accessories as per standards
135
-
-
... More
19. Landing enterance : Center opening power doors with SS No. 4
-
-
-
... More
0-400A Digital Ammeter with CTs of ratio 200-400/5A, Class 1 Accuracy and 15VA burden and selector switch -1 set.
-
-
-
... More
Providing and fixing color coated double skin insulated roof Galvalume profile sheets of LYSAGHT of Tata Blue scope or approved equivalent make (size, shape and pitch of corrugation as approved by Engineer-in-charge) Minimum of (0.45 BMT) 0.50 total coated thickness, High tensile with min 550 Mpa Yield strength, metallic hot dip coated with Al-Zn alloy (55% Aluminum, 43.5% Zinc, 1.5% Si ) as per AS 1397 / IS15961 - Zincalume AZ150 (min. 150 gms/sq.mt total on both sides). with Super Durable Polyester COLORBOND® XRW quality paint system of approved color, suitable for exterior application conforming to AS/NZS 2728 type-4 / IS15965 class 3. The sheet shall have a total coating thickness of 35 microns, super durable polyester COLORBOND® XRW with Thermatch™ solar reflectance technology quality paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces.
1430
-
-
... More
7. Shaft size required : 2400 x 1850 mm
-
-
-
... More
Note : DI Specials mentioned below are to be procured as per actual site conditions and as required only. Full payment will be released only for the specials fixed and erected at the site of work, as directed by the Engineer-in-Charge.
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
79
-
-
... More
Supply & laying in ground
1480
-
-
... More
Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).
6
-
-
... More
3.5C x 25 sqmm (Aluminum)
55
-
-
... More
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
26
-
-
... More
15W LED recess mounted fixture (Bajaj/Philips/Crompton/Wipro similar Bajaj: BGSLO Sleek 15 W WH RD )
59
-
-
... More
Outgoings :
-
-
-
... More
Outgoings:
-
-
-
... More
Providing and Displaying of plants for Flower beds at site
-
-
-
... More
Supply, fixing, testing and commissioning of the following number of Loops Microprocessor based analogue addressable type (UL approved) networkable Fire Control panel with Zonal Indications, Zener barriers, Signal booster for network connectivity modules with Optic Fiber cable, patch cords and Fiber optic media converters for both sides of the panels along with automatic speech dialer facility and where ever is required and with Battery Power pack. FACP shall have 2 wire circuit to connect 125 addressable devices & 125 detectors per loop. The FACP shall be capable of being networked (future expansion) with FACP located at different places of the premises through single RS 485 bus/Fiber optics. All devices shall be UL approved and as per specifications.
-
-
-
... More
Brass or bronze flat bar 6x32x250mm mounted on two DMC Insulators (such as acro type 4649) holes of 8mm dia to accomidate 1/4" connection blots with washers and butterfly nuts all made of brass or copper.
11
-
-
... More
35. Lift Announcement System (LAS)
-
-
-
... More
4C x 16 sqmm (Aluminum)
135
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
Diesel Engine pumps
-
-
-
... More
125A, 35KA TP MCCB with 50 KVAR MPP 440V Delta connected heavy duty Capacitor Banks - 2nos
-
-
-
... More
Ø 6.4 mm
135
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1set
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
... More
4C x 16 sqmm (Aluminum)
8
-
-
... More
Supply, installation, testing & Commissioning of 4Pole MCCB and Metering (Ammeter and Indication Lamps ) in Indoor type enclosure made out of 2mm thick CRCA sheet including all accessories. The enclosure shall have provision for entry for incoming & Cables for outgoing and including MS angle(50x6mm) iron frame up to a height 1Mtr including foundation)
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1 set
-
-
-
... More
15W LED surface mounted fixture (Bajaj/Philips/Crompton/Wipro similar Bajaj: BGSLO Sleek surface 15 W WH RD )
890
-
-
... More
Raw water pump monobloc, 1.8 cu.m/hr, 30m head ,1 ph, 210V, 0.5hp, -1 No. Make: kirloskar
-
-
-
... More
4. S.V.
-
-
-
... More
Hedge Plant
1000
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
200
-
-
... More
2.0 TR
13
-
-
... More
19core 2.5sq.mm
24
-
-
... More
4Core 2.5 sq.mm Copper
26
-
-
... More
Ø 12.7mm
85
-
-
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used
-
-
-
... More
4C x 6 sqmm (Aluminum)
45
-
-
... More
AIR HANDLING SYSTEM:
-
-
-
... More
50 NB
2
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
63/40A 16KA FP MCCB – 4nos
-
-
-
... More
Supply, Installation, Testing and Commissioning off Y Strainers consisting of magnetic screen with insulation & matching flanges suitable for hot water, as per the specifications and approved drawings.
-
-
-
... More
20. Indicators car & landings: 7 Segment 25mm digital direction and indicators in car and at all landings.
-
-
-
... More
Providing and fixing special quality bright finished brass locks for cupboard or ward robe with four levers of approved quality including necessary screws etc. complete.
a) 40 mm
120
-
-
... More
All works upto plinth level
360
-
-
... More
Chapter VII : Telephone Conduiting
-
-
-
... More
4Core 10 sq.mm
109
-
-
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :
-
-
-
... More
125A, 35KA TPMCCB with suitable capacitor duty rating Contactor and 50 KVAR MPP 440V Delta connected heavy duty Capacitor Banks - 2nos
-
-
-
... More
63A 25KA FP MCCB with TVSS – 1no
-
-
-
... More
xix) Instruments (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
Supply and wiring similar to item 1 above but for Ceiling Fan point including GI box and controled by one 6A switch, 100W Step type Electronic regulator with Concealed MS fan hook box.
-
-
-
... More
- Earth enhancement compound upto a depth of 2.0meters arround the electrode capsule.
-
-
-
... More
Manufacture and supply of Laundry table of size 1500 x 600 x 750 mm made out of 18mm thick MR grade plywood for frame work, top and sides, all exposed playwood surfaces cladded with 1mm thick laminate, all exposed edges to have teakwood beading etc., complete with spirit polish and all as per drawing.
1
-
-
... More
Ø 15.9mm
60
-
-
... More
Manufacture and supply of Form with back made out of 18mm plywood with 1mm thick laminate with 50mm thick foam for seat with fabric of approved shade complete all as per drawing.
5
-
-
... More
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
3220
-
-
... More
Executive Side Unit of size 1350 x 525 x 750 mm made out of 19 mm thick commercial block board covered with 4 mm teak veneer on sides, front & upper top to have designer pattern with 4 mm thick teak veneer in decorative & dsigner pattern having 4 Nos of drawers on right / left hand side and key board tray ride on telescopic channels all edges cover with teak wood lipping & back with 6 mm thick commercial ply, Top finished with PU Polished and internal surface finished with 0.8 mm thick lamination etc all complete.
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all heights and levels
-
-
-
... More
Providing and fixing Satin Stainless Steel top & bottom patch fittings of Dorma model no PT10/20 or approved equivalent, of size 51mm x 164mm with covers, suitable for floor springs or free pivots, with adjustable pivot insert , pivot point set at 55mm or 65mm . Patch fitting shall be suitable for fixing 10mm / 12mm glass.
20
-
-
... More
Supply of High back chair with the seat shall be made up of 1.2+/-0.1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric or synthetic leather and moulded polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 76.0cm(H). The armrest top shall be made of moulded polyurethane and mounted on to a drop lift height adjustable type M.S tubular armrest support chrome plated. The armrest height shall be adjustable up to 6.5+/-0.5cm in 5 steps and also has swivel adjustment of 22 degree+/-2 on both sides. The mechanism of the chair shall have following features : 360⁰ revolving type, Knee tilt synchro mechanism, Tilt tension adjustment, Single point control, 4 position locking with anti shock feature, Seat depth adjustment of 6.0+/-0.5cm should be locked in 6 positions. The backrest shall consists of a sliding up down mechanism, Which can be adjusted in the range of 7.5+/-0.5cm and should be locked in 4 positions for correct position of lumber support. The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm.
3
-
-
... More
40A AC1 Contactor with 230V Coil and a Time switch-1set
-
-
-
... More
400A Digital Ammeter with CTs of ratio 200-400/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
9. Frame (S.S)
-
-
-
... More
Chapter XIX : Area Lighting
-
-
-
... More
Automatic PF Improvement Panel
1
-
-
... More
All works above plinth level upto floor V level
25
-
-
... More
63/40A 25KA FP MCCBs – 14no
-
-
-
... More
100A, 35KA TPMCCB and 25 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -1no
-
-
-
... More
Supplying, fixing, testing & commissioning of following size/ modules, Gl box along with modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
4024
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
Supply, Installation, Testing & Commissioning of 40A MCB enclosed in a IP65 protection box suitable for outdoor application near VRF Outdoor Unit.
3
-
-
... More
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
-
-
-
... More
Supply, erection and commissioning of individual Gate Lights with 0.6mtr long 50mm dia Class B GI pole complete with base plate FRP terminal box, wiring from terminal box to the fixture with 3Core 2.5sq.mm copper wire, MCB Control and 40mm dia Class B GI pipe for incoming and outgoing cables as per drawing etc and Supply and installation of 40W LED fixture. (Bajaj/Philips/Crompton/Wipro similar to Bajaj :BGCL 40W LED WH)
4
-
-
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.
-
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
518
-
-
... More
Supply and fixing of Three phase 32A 3P+N+E wall mounted switched interlocking sockets and surface mounting with 3P+N+E plug including all fixing accessories. (IP44)
7
-
-
... More
40A AC1 Contactor with 230V Coil and a Time Switch-1set
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1set
-
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
... More
150mm x 54mm, The Load bearing capacity of the Cable Trays should be minimum of 29.51KG/meter at the span of 1.5Meter.
50
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1 set.
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
695
-
-
... More
Validation and documentation of the complete facility as per the ISO 14644 Clean Room standards for ISO Class 6 'at rest' conditions . This shall include - Air Particulate count using Laser Particle counter, temp & RH checks, differential pressures,air changes,filter integrity tests,air flow pattern (by VEDIO) ,duct leak test ,by department approved third party. Standard as applicable for Clean Rooms.
1
-
-
... More
Supply and laying of 80mm dia Class 'B' GI pipes laid 750mm below ground level including excavation, back filling etc., complete.
630
-
-
... More
Two way switch point:
-
-
-
... More
Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density).
75100
-
-
... More
Supply, Installation, Testing and Commissioning of Fire retardant canvass connections with MS Epoxy painted / Al. powdercoated finish angle flanges on both sides
14
-
-
... More
- Earth Enhaced compound up to a depth of 2.0meters around the electrode capsule.
-
-
-
... More
CT Operated Load manager with RS 485 (Similar to EM-6400NG) – 1set
-
-
-
... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted MV panel made out of 2mm thick CRCA/Galvanised steel enclosure for main frame and 1.6mm thick partitions and shall have IK Certification as per IEC 62262 for mechanical strength/ruggedness, after seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below.The panel shall be got fabricated from manufacturers as per IEC 61439(Part-1&2). panels shall have IP-55 degree of protection wiith external clear acrylic door . Enclosure shall be modular with bolted design. Enclosure shall be powder coated with RAL-7035 coat with matt finish. Design ambient temperature shall be 50 degree centrigrade. No use of hygroscopic material like FRP/Hylam/Bakellite sheet inside the panel for partitions or any other purpose.
-
-
-
... More
Hard rock (requiring blasting)
3000
-
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
446
-
-
... More
Ø 50mm
2
-
-
... More
Metering For Each Incomer :
-
-
-
... More
4Way VTPNMCBDB with 100A, 25KA, 4Pole MCCB as incomer and 4nos 40-63A TP MCBs as outgoings.
3
-
-
... More
Providing Indoor Heat shrinkable end terminations for the cable specified above with all materials, Bi-metallic lugs using crimping tool, 11KV Insulation tape, Identification tags etc., including end termination and Earthing of Gland.
-
-
-
... More
Supply, Installation, Testing and Commissioning of 32A 3 phase 5 pin socket with 32A 4 pole MCB with an enclosed compartment and SS cover plate for clean room compatable.
2
-
-
... More
Ammeter with cast resin CTs and selector switch -1 set
-
-
-
... More
Supply and fixing of Single phase 16A 2P+E wall mounted switched interlocking sockets and surface mounting with 2P+E plug including all fixing accessories. (IP44)
12
-
-
... More
Supplying and fixing of PVC cowl of 100 mm dia of approved brand, quality etc., all complete.
2
-
-
... More
4Core 6 sq.mm
4410
-
-
... More
Laying in ground
50
-
-
... More
150W LED High bay Light Fixture (Bajaj/Philips/Crompton/Wipro similar Bajaj : BGHBM 150W LED XE)
66
-
-
... More
Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like
30
-
-
... More
4C X 2.5 Sq.mm Copper
100
-
-
... More
Supply, fixing, testing and commissioning of centrifugally Cast Ductile Iron fittings/Specials (Socket and Spigot type) conforming to IS 9523: 2000, Class K9, with Cement Mortar Lining (CML) as per IS 455: 1989 inside and bituminous coated outside ISI marked such as Bends, Elbows, Tees, Flanged Spigots, Collars, flanges (flange rating PN 16) etc testing the joints for leakage (if any) and making good hydrant system.
-
-
-
... More
Supply, Installation, Testing and Commissioning of weather proof extruded aluminium powder coated fresh air louver of non vision type of Perforated Al net, VCD etc as per the specifications and approved drawings.
1
-
-
... More
Supply of HI-WALL SPLIT UNIT with indoor and outdoor units with Inverter compressors including proper mounting arrangement and accessories. Indoor unit comprises of pre filter, Coil Section, evaporator section, low noise Multi speed fan, all refrigerant accessories & cordles remote controller with LCD Display, etc. as necessary and Mounting Stand for outdoor unit. Power from nearest socket to indoor/ outdoor unit as per the specifications and approved drawings. (R410A Refrigerant).
-
-
-
... More
Up to 35Sq.mm
10580
-
-
... More
Supply of bed side table of following size made out of 18mm thick ply with one drawer with 3.5mm thick veneer drawer to run on powder coated sliding channels, hardware fittings like handles and locking arrangements complete with Melamine polish etc all complete.
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 11 kV grade of following size in the existing masonry open duct as required.
-
-
-
... More
22. Call register type KDS-50 Micro pushbutton for Car and landing.
-
-
-
... More
Supply, Installation, Testing & Commissioning of Ceiling Speakers.
14
-
-
... More
Laying of one number additional PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
... More
Supply of Single seater sofa of size 700x700x740mm made out of second class hard wood frame work, arm rests shall have 100mm wide x 18mm thick teak wood, flat springs for seat and nawar strips for back, cladded with 100mm thick 40 density foam for seat and 70mm thick 32 density foam for back, 10mm thick medium density poly foam for countering with white cloth lining, upholstered with fabric of approved brand and shade, exposed wooden surface finished with melamine polish etc, complete all as per drawings and as directed.
20
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. ( AS per IS 1200 No extra Amount shall be paid for excavation is done beyond 1.5 m depth if the excavation is done by mechanical means ) .
-
-
-
... More
All socketed 11.25deg. bend
-
-
-
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
... More
1. Type and capacity : 8 Passenger (554 kgs)
-
-
-
... More
4C X 4 Sq.mm Copper
50
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed heavy FRLS PVC conduit, 2 way modular switch,modular plate, suitable GI box and earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cableetc. as required.
115
-
-
... More
63A 35KA FP MCCB with TVSS – 1no
-
-
-
... More
63/40A 25KA FP MCCBs - 15nos
-
-
-
... More
Supply, Installation, Testing and Commissioning of Refrigerant Piping Joint For Liquid Line.
86
-
-
... More
Supply, Installation, Testing and Commissioning of CENTRALISED Remote Controller advanced I Touch Controller Type
1
-
-
... More
150 mm dia
8
-
-
... More
Excavating, supplying and filling of local earth (including royalty) within MOD Land by mechanical transport up to a lead of 5km, also including ramming and watering of the earth in layers not exceeding 20cm in trenching, plinth, sides of foundation etc. complete.
3525
-
-
... More
Group-C
1261
-
-
... More
Providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of Engineer-in-charge.
450
-
-
... More
300 mm X 54 mm
20
-
-
... More
Providing and fixing Wash Hand Basin Rectangular type comprising of;
21
-
-
... More
FLOWER BED PREPARATION
-
-
-
... More
40/63A 25KA FP MCCBs - 6nos
-
-
-
... More
b) 1200x600mm
18
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1 set
-
-
-
... More
8. Available shaft size : 2580 x 2110 mm
-
-
-
... More
100 mm dia Ductile Iron Double Flanged
50
-
-
... More
Chapter XI: Lifts
-
-
-
... More
Supply of Executive Designer Five seater sofa (3+1+1) made out of 50 x 25mm second class hard wood frame having with teak wood in designer & decorative pattern and 100mm thick high density foam in seat & back with 50mm thick rubber foam quitting with 20mm thick u foam of high density including upholstry with fabric of approved shade & quality all exposed teak wood frame finish with melamine polish . Three Seater Size 1790 x 835 x 550 and single seater sofa Size 670 x 835 x 550mm). etc all complete.
3
-
-
... More
37. Infra red door safety device
-
-
-
... More
Supply and fixing in position best quality and approved make CP brass coat hooks of approved equivalent make with flanges fixed to wall/door shutters with necessary screws washers etc., complete.
46
-
-
... More
Four Lights point controlled by one 6A switch.
24
-
-
... More
20pair
3
-
-
... More
Flashings/ Aprons.( Upto 600 mm)
130
-
-
... More
63/40A 25KA FP MCCB – 3nos
-
-
-
... More
All kinds of soil
11890
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
18
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water).
-
-
-
... More
b) Abrasion resistance in terms of wearing property as per IS 9162-1979 shall be 0.03mm (30 micron) or less.
-
-
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
160
-
-
... More
Kitchen sink without drain board
-
-
-
... More
20A 10KA TPN MCBs -3nos
-
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
... More
Granite Stone of approved shade
30
-
-
... More
Supply and placement of Medium Back Visitorchair with cushioned seat assembly shall consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing plastic seat cover. The back shallmade up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-62.0cm & size of seat shall be (W)-52.5cm x (D)-51.0cm.armrest shall be injection moulded with height adjustable up to 4.5+/-0.5cm in 3 steps and width adjustable up to 20mm. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti-Shock feature. Spine bracket shall made of Aluminium diecast piece connecting back with mechanism.The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black nylonMake Godrej model Leoma or Equivalent specifications of Wipro/Featherlite/Durian/ HOF/ERGO.
6
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
Supply and fixing of Dressing mirror of size 600 x 1500 mm height, 5mm thick mirror fixed on 6mm thick commercial plywood backing made out of 20mm x 20mm TW frame ,600mm drawer made out of 18 mm thick commercial plywood with 3.5mm thick veneer external,drawer shall run on powder coated sliding channels,necessary handles all as per drawing including finishing with melamine polish etc., complete as directed by Engineer-in-charge.
14
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches- 1 set.
-
-
-
... More
Moc: CI casing, Bronze Impeller
-
-
-
... More
Supply and placement of Wooden work bench with overall dimensions of 2000mm L x 750mm D x 840mm HColour RAL 5012 BLUE .Each unit should be made up of the following components1. Multiplex Worktop2. A pair of LegsSpecifications of omponents1. Multiplex Work top The worktop should be made of various layers of beech wood which are planed, glued and pressed together. This should make the work top non-deformable, and load and wear resistant.The worktop comes with 3mm thick black color oil proof rubber coated.Overall dimensions of worktop should be 2000mm L x 750mm D x 40mm H.Load bearing capacity of Workbench = UDL 500 Kg. 2. A pair of bench legs Work bench has 2sets of bench legs of 80x40 C-channel of 1.2mm thick. The bench legs should be powder coated to the specifications mentioned belowPre treatment and surface finish The raw material used in production of the unit provided should be virgin steel.
42
-
-
... More
100 mm diameter
710
-
-
... More
4. Engine - fault reset
-
-
-
... More
Up to 300 mm dia
50
-
-
... More
LAWN PLANTATION
-
-
-
... More
Providing and fixing CP towel ring of 300mm diawith brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality.
73
-
-
... More
0-1000A Digital Ammeter with CTs of ratio 1000-500/5A, Class 1 Accuracy and 15VA burden and selector switch -1 set
-
-
-
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
1540
-
-
... More
Supply, installation ,testing and commissioning &Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382 :
-
-
-
... More
Supply, Installation, Testing and Commissioning of Wall to wall and wall to ceiling coving
130
-
-
... More
Outgoings :
-
-
-
... More
Supply, Installation, Testing and Commissioning of weather proof extruded aluminium powder coated fresh air louver of non vision type of Perforated Al net, VCD etc as per the specifications and approved drawings.
3
-
-
... More
Providing and fixing MS doors, frames made out of MS angles, channels as per approved design and drawings including jointing, welding and grinding the welded joints to neat finish covered both sides with MS sheet of required thickness including providing and applying approved steel primer, all fittings etc complete. Note: The Contractor shall submitt shop drawings for approval
-
-
-
... More
Design, Supply, erection and Commissioning of packaged sewage treatment plant including civil works of capacity 35 m3 per day of Ion Exchange / Thermax or approved equivalent brand which consists of bar screen chamber, oil and grease trap chamber equilisation tank, FAB Feed pumps including Motors, Air blowers including motors, FAB reactors, Tube settlers, Sludge holding tank, Chlorine dosing system, V Notch plate, Filter feed pumps, Activated Carbon filter, centrifuge system, gear box, motor, MCC panel, any other equipment as required for tertiary system of treatment including supply, erection and testing of inter connecting pipe works, cabling, earthing with cable tray etc., all complete including of all civil an mechanical work for finished item of work to the satisfaction of Engineer-in-Charge.
1
-
-
... More
2. Speed Approx: 1.5 meter/second
-
-
-
... More
Supply and fixing of following HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461, Steel wire mesh cable trays with internal dimensions & load bearing capacities as given below, including couplers, mounting accessories with including all fixing accessories and including 2runs of 25x5mm GI strip along with cable tray etc., complete as required.
-
-
-
... More
Supply and laying of 50 mm dia dia. Class 'B' GI pipes for cable/wire protection below ground works.
30
-
-
... More
3 C x 2.5 Sqmm Copper
4
-
-
... More
Range - Head 28m , Discharge - 3.8 lps
-
-
-
... More
Note : Before roof treatment of slab , slab shall be filled with water for twenty four hours if any seepages are seen, those shall be rectified by grouting / injecting low viscouse appoxy grout material of make Myk-Arment inject EP or equvialant of Sika , BASF , Fosroc .The rate for this shall deemed to be inclusive in the above item
-
-
-
... More
Outgoings :
-
-
-
... More
3.5C X 35 Sq.mm Straight Through joints
1
-
-
... More
xxiii) Pressure gauges (1 Lot)
-
-
-
... More
63A,50KA FP MCCB with TVSS - 1set
-
-
-
... More
xxiv) Air Rotameter (1 No)
-
-
-
... More
Supply, Installation, Testing and Commissioning of Extruded Al. Powder coated Grill with Al. Collar Dampers as per the specifications and approved drawings.(Colour to be aproved by dept)
5
-
-
... More
3.5C x 240 Sqmm-AYFY
2
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
1320
-
-
... More
Supply & laying in existing trench / hume pipe
815
-
-
... More
40A AC1 Contactor with 230V Coil and a Time Switch- 1set
-
-
-
... More
20A 10KA TPN MCBs -3nos
-
-
-
... More
10 LPH
2
-
-
... More
Supply and laying of following size earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories and terminations when laid in trench with necessary interconnections with earth station and equipments.
-
-
-
... More
Supply Installation Testing and commissioning of TPN MCB Double door Distribution boards dust and vermin protected and rated for 415V Three Phase AC supply operation including incoming MCB /ELCB as per specifications and required capacity Neutral bar and Earth terminal complete as required and installed in concealed in wall after necessary chase cutting with finishing/surface in wall including all fixing materials required. MCBs shall conform to IS : 8828 and ELCB shall conform to IS :12640. All MCBs shall be 'C' Curve. DBs shall be provided along with required wire adopter boxes around the DB as required and dummys for spare ways in the DB (No claim shall be allowed for the same).
-
-
-
... More
Hard rock (requiring blasting)
125
-
-
... More
Also panel shall have sufficient (min. 50 Nos) NO/NC contacts for extending the status( annunciation) of fire pumps to the Fire alarm panel.
-
-
-
... More
3.5C X 120 Sq.mm
26
-
-
... More
- 40mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, seald at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs.
-
-
-
... More
Providing printed instruction chart both in English, Hindi and local launguage and duly framed with front glasses, for treatment of person suffering from Electric shock.
24
-
-
... More
Size of Tile 600x600 mm
215
-
-
... More
3.5C X 50SQ.MM -Copper
10
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
Supply of Aluminium step ladder of 1.5 mt ht self supporting having 2.5" wide flat step for load bearing capacity of upto 150 kgs and step to step distance to be 12" complete with rubber shoes,side plugs hinges,locks ladder etc., complete as directed by Engineer-in-charge.
1
-
-
... More
150 mm dia
12
-
-
... More
125A 35KA FP MCCBs - 2nos
-
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
5674
-
-
... More
Supply, installation , Testing and commissioning of 8 passengers lifts With Duplex system Contol Wiring and minor civil works required for installation of lift such as scoffolding, grouting, concreting and masonary work including all accessories. with following detail. (As per OEM)
2
-
-
... More
300mm x 54mm, The Load bearing capacity of the Cable Trays should be minimum of 57.66KG/meter at the span of 1.5Meter
200
-
-
... More
vii) FAB Reactors Media (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
x) Trough weir (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
a) Compressive strength shall not be less than 500kg/sqcm in 28 days.
-
-
-
... More
10. Car and landing door opening : 900 x 2000mm
-
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
10
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
... More
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
-
-
-
... More
Manufacture and supply of table of size 1200 x 600 x 750 mm made out of 18mm thick MR grade plywood for frame work, top and sides, drawers with telescopic sliding channels, all exposed playwood surfaces cladded with 1mm thick laminate, all exposed edges to have teakwood beading with one drawer and one shutter with locking arrangements etc., complete with spirit polish and all as per drawing.
6
-
-
... More
9. Car Size : 2200mm High x 1500 mm Deep x 1600 mm wide
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
Supply, Installation,Testing and Commissioning of High Static Ducted type Indoor unit with pre-filter (EU - 4),fan section with low noise level, multispeed fan motor, coil section with DX coil, outer cabient, condensate drain pump, insulation, pipe connections, including necessary control wiring, required Fire retardant canvass connections with GI . powdercoated finish angle flanges on both sides,etc. as necessary. Unit to be provided with microprocessor with Corded remote controller as per the specifications and approved drawings.
-
-
-
... More
Spine bracket shall made of Aluminium diecast piece connecting back with mechanism. The sled base leg frame welded assembly shall made from MSERW round tube with base plate for seat fixing. Overall dimensions of Chair shall be, Width of Chair - 71.0cm, Depth of Chair - 71.0 cm as measured from pedestal below. Height from ground - 98.0 cm. Seat height - 45.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Make Godrej model Leoma or Equivalent specifications of Wipro/Featherlite/Durian/ HOF/ERGO.
-
-
-
... More
Reducer socket
-
-
-
... More
63/40A 25KA FP MCCBs – 10nos
-
-
-
... More
Ø 12.7 mm
15
-
-
... More
3.5C x 150 sqmm (Aluminum)
70
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I of Gyproc (Saint gobain or equivalent make)
1650
-
-
... More
Providing and fixing in position CP soap dish of approved equivalent make with necessary CP screws and washers fixed into the wall including cutting the wall, fixing and making good the surface etc. Complete all as specified.
28
-
-
... More
Supply, Installation, testing and commissioning of 5star rated 25 liters storage type water heaters with 1.5KW heating element fixed on wall / column with necessary, bracket including of all installation materials, fixing of inlet/outlet water pipes, interconnections as required
4
-
-
... More
Up to 35Sq.mm
8484
-
-
... More
Supplying, Installing, Testing and Commissioning of electrical motor driven end suction top discharge monobloc centrifugal pumps of kirloskar or approved equivalent make, 3 phase, capable of delivering water of capacity and head as mentioned below of 2900 RPM. Complete set shall be mounted on base frame. The quoted rate shall include providing & fixing of flexible coupling, coupling guard, TEFC Efficiency 1 motor, RCC foundation (as recommended by manufacturer) and Foundation bolts etc.
6
-
-
... More
All kinds of soil.
5684
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. ( AS per IS 1200 No extra Amount shall be paid for excavation is done beyond 1.5 m depth if the excavation is done by mechanical means ) .
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. ( AS per IS 1200 No extra Amount shall be paid for excavation is done beyond 1.5 m depth if the excavation is done by mechanical means ) .
-
-
-
... More
2 x 63 Amps MCCB outgoing for Condenser units
-
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
50 X 5mm GI Strip laid in Ground
1264
-
-
... More
35 mm thick shutters
-
-
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
-
-
-
... More
Supply of Dressing stool of size 375 x 375 x 375mm made out of 12mm thick commercial plywood all sides with 1mm laminate. Top to have 12mm thick commercial plywood with 50mm high density foam duly upholstered with approved fabric. Provided with 4 Nos castors finished with melamine finish etc., complete all as per drawing.
4
-
-
... More
For fixed portion
-
-
-
... More
Weather shade, Chajjas, corbels etc., including edges
556
-
-
... More
viii) Air grid for FAB Reactors (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
... More
100A 35KA FP MCCBs - 1no
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
12mm thick plastering in sunken slabs / Drains etc., in cement mortar 1:3 (1cement: 3 coarse sand) with water proofing compound mixed as per manufacturer instruction a floating coat of neat cement incl. benching, haunching, providing over flow pipes and proper slopes all as directed
1301
-
-
... More
Udaipur green marble
20
-
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
30
-
-
... More
25 X 5mm Hot dip GI strip
-
-
-
... More
On W.B.M / W.M.M. @ 0.4kg/sqm
173000
-
-
... More
Ø 25 mm
80
-
-
... More
French spirit polishing on Wood work
-
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
50
-
-
... More
150 mm diameter
450
-
-
... More
Subhead - XII : Sanitary Services
-
-
-
... More
Supply and stacking of plant Nerium oleander (kaner) dwarf of height 30-40 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge.
1000
-
-
... More
Supply of Barber Chair with Revolving,arms, cushion at seat and back duly upholsted with hydraulic system etc, complete as per direction of engineer in charge
1
-
-
... More
Providing sand cast iron drop connection externally for 60 cm drop from branch sewer line to main sewer manhole including inspection and cleaning eye with chain and lid, sand cast iron drop pipe and bend encased all-round with cement concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) with all centering and shuttering required, cutting holes in walls and making good with brick work in cement mortar 1:4 (1 cement : 4 coarse sand) plastered with cement mortar 1:3 (1 cement : 3 coarse sand) on inside of the manhole wall, lead caulked joints between sand cast iron pipes and fittings, stiff cement mortar 1:1 (1 cement : 1 fine sand) joints between sand cast iron tee and S.W. pipe, making required channels complete as per standard design and specifications :
-
-
-
... More
Supply, Installation, Testing and Commissioning of Refrigerant Piping Joint For Suction Line.
2
-
-
... More
Metering For Incomer :
-
-
-
... More
4. Location of Machine Room: Machine room less
-
-
-
... More
CT Operated Load manager with RS 485 (Similar to EM-6400 NG) – 1set
-
-
-
... More
60W LED Flood light fixture (Bajaj/Philips/Crompton/Wipro similar Bajaj : BJFL 60W LED I)
33
-
-
... More
400A Digital Ammeter with CTs of ratio 200-400/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
Upto 35 sq. mm
455
-
-
... More
Incoming : 400A, 50KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
63/40A 25KA FP MCCB – 2nos
-
-
-
... More
Providing Double compression end terminations for the cable specified above with compression type gland, lugs using crimping tool, Insulation tape, Identification tags etc.,including end termination and Earthing of Gland.
-
-
-
... More
34. Load weighing device with indicator & bypass function.
-
-
-
... More
610 x 610 x 305mm deep
14
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
3550
-
-
... More
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
12830
-
-
... More
Ceiling Fan
-
-
-
... More
Supply and fixing of Exhaust pipe assembly with Insulation for the Exhaust pipes with 50mm thick Mineral wool insulation and cladding with 24SWG Aluminium sheet including for flange joints for the DG sets of size as required. (The Tenderer shall specify the number and size of Exhaust pipes for their Sets)
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
Supply, Installation, Testing and Commissioning of Extruded Al. Powder coated ceiling square diffusers Al. Collar Dampers for Supply as per the specifications and approved drawings.(Colour to be aproved by dept)
3
-
-
... More
DSC Platoon
1
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
310
-
-
... More
15 mm nominal bore
183
-
-
... More
Supply of Visitor chair with seat shall be made up of 1.2+/-0.1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric or synthetic leather and moulded polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 64.5Cm(H). The armrest top shall be made of moulded polyurethane and mounted on to a fixed type M.S tubular armrest support chrome plated. The Arm support has static vertical adjustment of +/-1.5+/-0.05cm.
40
-
-
... More
Providing and fixing GI hexagonal chicken wire mesh of size 12mm x 22g at the junction of disimilar surfaces of masonry wall and RCC column by beams and the like including necessary nails for fixing etc, complete all as per specification and direction of Engineer - in - charge for all floors at all heights.
205
-
-
... More
Supplying and filling murrum in trenches, plinth, sides of foundations, sub base course to roads etc., including transporting, unloading, spreading, watering proper consolidating with 10 tonne power roller (wherever 10 tonne power roller cannot be operated the consolidation shall be done using 1 tonne vibro roller or heavy duty powered earth rammer) in layers not exceeding 150mm thick and dressing the surface complete as directed (Degree of consolidation 95% proctor density).
2384
-
-
... More
12mm thick plastering in Drains in cement mortar 1:3 (1cement: 3 fine sand) with water proofing compound mixed as per manufacturer instruction a floating coat of neat cement incl. benching, haunching, providing over flow pipes and proper slopes all as directed.
105
-
-
... More
100x10 mm
1336
-
-
... More
Supply of Receptacle of size 270 mm at bottom and 350mm at top round in shape with lid and Mechanism to operate with feet made out of PVC etc., complete all as directed by Engineer -in- charge.
15
-
-
... More
Supply of dining table of size 2400 x 1200mm seater made out of teak wood frame of 100x100mm thick for legs and 100x75mm thick frame for horizontal supports with 18mm thick commercial ply with1mm laminateetc; All exposed edges to have TW lipping etc; complete in melamine finish.
2
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
Providing wall mounted TV stand/ panelling with second class teak wood frame work, 12mm thick plywood covered finished with 3.50mm thick teak veneer/fabric panelling duly melamine polish to exposed wooden surfaces etc complete all as directed by engineer-in-charge.
60
-
-
... More
4Core 16 sq.mm
420
-
-
... More
25NB
50
-
-
... More
1:6 (1 cement: 6 fine sand)
13205
-
-
... More
4C X 16Sq.mm
8
-
-
... More
Supply of Medical examination bench of size 1800mm x 900mm x 750mm made out of CRCA sheets of 18 gauage and 32mm dia pipe legs machine pressed double belt ER sheet two section top adjustable on sachet and legs fitted with four rubber feet, pre-treated and epoxy powder coated etc., complete all as per Model no :STHC3AE1C0000001 of godrej make or eqivalents of Wipro/Featherlite/Durian/Ikea.
1
-
-
... More
Supply and fixing of 4nos 9Ltrs Fire buckets round bottom type enamelpainted, white inside & Red out side with FIRE mark, filled with dry sand and Supply and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500mm in length, 900mm height frame made out of 30mm x 30mmx 4mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver paint.
18
-
-
... More
Manufacture and supply of TV Trolley of size 750 x 600 x 675 mm made out of shutters with 4mm glass and 18mm thick MR graded plywood cladded with 1mm thick lamination on sides and top, 1 shelf and openable shutters, all exposed edges to have teakwood beading etc., complete with spirit polish and all as per drawing.
1
-
-
... More
Supply Installation Testing and commissioning of TPN MCB Double door Distribution boards dust, water proof and vermin protected and rated for 415V Three Phase AC supply operation including incoming MCB /RCBO as per specifications and required capacity Neutral bar and Earth terminal complete as required and installed in flush with wall including all fixing materials required. MCBs shall conform to IS : 8828 and ELCB /RCBO shall conform to IS : 12640. All MCBs shall be D Curve.
-
-
-
... More
Supply of curtains of approved quality including polyester lining, top with buckram backing and tape for curtain rings, top fold 100mm wide, bottom fold 100mm wide, curtain to have three to four pleats in width of finished sizxe of 600mm and 150mm height etc; complete all asper the directions of Engr-in-charge.
80
-
-
... More
800A Digital Ammeter with CTs of ratio 800-400/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
Chapter XXI : Perimeter Lighting
-
-
-
... More
Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, including IInd class teak wood lipping of 18 mm wide x 6 mm thick with necessary screws ,edges to be painted with polyurethane primer (fittings to be paid separately).
a) 18 mm thick
175
-
-
... More
Busbars : 125A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
22 G (0.8 G)
20
-
-
... More
27. CVT/Built Voltage Stablizer (Constant Voltage Transformer)
-
-
-
... More
75 mm
695
-
-
... More
Supply, Installation, Testing and Commissioning of 2mm thick, self leveling conductive vinyl flooring
135
-
-
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
... More
Socketed collar
-
-
-
... More
13. Control: Selective collective control with simplex.
-
-
-
... More
Cement mortar 1:4 (1 cement :4 coarse sand)
490
-
-
... More
Pipes, cables etc. not exceeding 80 mm dia. in Hard Rock (Blasting Prohibited)
20
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
31. FRD/Fire Man Drive (Fire Rescue Device)
-
-
-
... More
Incoming : 250A, 35KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
Four loop with loop cards
1
-
-
... More
50 x 5 mm hot dip galvanized iron strip
-
-
-
... More
Applying priming coat:
-
-
-
... More
380mm Sweep
40
-
-
... More
Overload relay , single phasing protection -1 No
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
FPB-11 (Weather proof double door outdoor type)
1
-
-
... More
Providing and fixing white vitreous china wall hung water closet of of approved brand/ make, shape, size and pattern including providing & fixing PP soft close seat cover, single piece Slim concealed cistern body with installation kit and S type drain pipe connection set, with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 2 litre/ 4 litres), including fittings, nuts, bolts, gasket, hinges and accessories set etc complete in all respect as per directions of Engineer-in-Charge. (Jaquar make Wall Hung- WC of Model No. SLS-WHT-6951, Concealed Cistern - JCS-WHT-2400S / Parryware / Hindware or Approved Equivalent make)
16
-
-
... More
Point Wiring for Light/ Fan/ exhaust fan with 2 runs of 1100V grade 1.5 Sq.mm & 1 run of 1.5 Sq.mm FRLS insulated multistranded Copper wires, run in & including 25mm dia, 2mm thickness FRLS PVC ISI mark conduits concealed in wall after necessary chase cutting with finishing/surface in wall / ceiling conforming to IS 732 including all accessories such as junction boxes, conduit bends, elbows and ceiling rose, anodised GI Switch box with modular switch and the box covered with front plate.
-
-
-
... More
Upto 35 sq. mm
1000
-
-
... More
Supplying and fixing C.I. cover with frame for manholes
-
-
-
... More
Supply and placement of Almirah small of size 900mm(W)x507mm(D)x1372mm(H) (Height without leveler) Aesthetically appealing Slimline, completely knock down construction. Removable Skirting to cover integral legs. Legs fitted with screw type leveler Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Steel Hinged Door Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy. 3 way 90 Degree Removable key type Cam lock & locking mechanism Fixed Half locker on RH side Hinged Door. 2 way Cam lock with Knob type handle Height wise Adjustable Shelf Mounting. 2 Nos. Of Full Adj.Shelves, Epoxy Powder coated to the thickness of 50 microns (+-10). Make Godrej model Slimline or equivalent of Wipro Model Endura or equivalent specification of Featherlite/Ergo/Durian
31
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
With Brick Masonry
16
-
-
... More
EHD-35
-
-
-
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
70
-
-
... More
Supply, erection, testing and commissioning of double flanged swing check valves (non Return PN-16) conforming to IS 5312 complete with bolts, nuts and rubber insertions and of following size:
-
-
-
... More
Supply and laying of following size earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid in trench with necessary interconnections with earth station and equipments.
-
-
-
... More
Providing HDPE pipe PE-80 grade (12.5 kg/ sq.cm) of 63 mm OD for bore wells.
800
-
-
... More
Incoming : 250A, 35KA 4Pole MCCB and over load, short circuit, earth fault relay with CBCT -1set
-
-
-
... More
Control panel : PLC based membrane pad control panel with LT switch gear and wiring - 1 set
-
-
-
... More
Metering :
-
-
-
... More
Supply, Installation, Testing and Commissioning of Outdoor type panel with 160A 4-pole MCCB incomer,Aluminum busbars with 0.8A/Sqmm rating Outdoor Units enclosed in a weather proof box suitable for out door application with class protection not less than IP - 65 with - Outgoing:
1
-
-
... More
29. Flooring : Provision for Granite flooring with 19mm recess.
-
-
-
... More
1:6 (1 cement : 6 fine sand)
15000
-
-
... More
Ø 22.2 mm
175
-
-
... More
Supply and stacking of plant Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm as per direction of the officer-in-charge.
400
-
-
... More
Busbars : 400A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
Main PCC @ Substation - II
1
-
-
... More
0-250A Digital Ammeter with CTs of ratio 120-250/5A, Class 1 Accuracy and 15VA burden and selector switch -1set
-
-
-
... More
Supply of chair made out of 25mm dia C.R. Pipe with powder coating finish with P.U. arms finish with seat and back with bended plywood with cushioned of 32 high density rubber foam for seat and back with fabric / competitive lather or approved shade etc., complete all as Per Model no: MULTIPURPOSE FU1004 of Godrej make or equivalents of Wipro/Featherlite/Durian/Ikea..
10
-
-
... More
40 Automatic Rescue Device(ARD), Over Load indication
-
-
-
... More
Metering For Each Incomer :
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1 set
-
-
-
... More
Supply and stacking of plant Malpighia coccigera of height 30-45 cm.,multibranched in earthen pots of size 20 cm as per direction of the officer-in-charge.
1000
-
-
... More
Providing and fixing aluminium rubber cleats of size 50mm
221
-
-
... More
PUMPS
-
-
-
... More
Supply of Easy sofa chair of size 550 x 550 x 900 mm made out of TW of size 45 x 45 mm on arms, back and legs with 38 x 42 mm duly upholstered back with 25mm thick high density foam and fabric, seat to have 50 mm thick high density foam and fabric of approved shade finished with spirit polish etc., complete.
12
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. ( AS per IS 1200 No extra Amount shall be paid for excavation is done beyond 1.5 m depth if the excavation is done by mechanical means ) .
-
-
-
... More
Outgoings :
-
-
-
... More
63A 35KA FP MCCB with TVSS – 1no
-
-
-
... More
100 mm dia sand cast iron drop connection
3
-
-
... More
AHU Kits
-
-
-
... More
Supply of following capacities of Vairable Refrigerant Flow (VRF / VRV) Outdoor condensing unit comprising of Invertor SCROLL compressor's, Heat Exchanger, propeller / axial fans, refrigerant Circuit, Safety Devices & Oil Recovery System, operating on R410a refrigerant gas. Necessary Refrigerant Gas and oil charge. Compressor shall be equipped with inverter controller of Insulated Gate Bipolar Transistor (IGBT) type to be efficient & quiet. The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual control. Heat Exchanger shall be constructed with copper tubes mechanically bonded to aluminium fins to form a cross fin coil. Aluminium fins shall be covered by anti-corrosion resin film. Refrigerant Circuit shall include an accumulator. The Outdoor unit shall include the following safety devices : High pressure switch, Low pressure switch, Fan motor safety thermostat, Inverter overload protector, Over Current relay, Fusible plugs, Fuses etc . Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping.
-
-
-
... More
Providing maintenance free Earth station with consisting of
74
-
-
... More
63A 25KA FP MCCB with TVSS – 1no
-
-
-
... More
All accessories and indication lamps along with Battery charger.
-
-
-
... More
8Way TPNMCBDB with 40A, 100mA 4Pole RCBO as incomer and 21 nos 6-25A SPMCBs and 3nos 8KA SP SPDs as outgoings. (LDBs)
6
-
-
... More
All kinds of soil
-
-
-
... More
Chapter XXII - Area Drainage
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Skirting light with white LED with GI Box and front plate (Legrand : Myrius 673036)
27
-
-
... More
Supply and laying of 25mm dia. 2mm thick PVC conduit concealed in wall/ ceiling/floor and drawing of 12SWG GI wire as fish wire for laying of LAN Cables at a later stage and supply of all fixing accessories such as junction boxes, conduit bends, etc., complete as required.
5475
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
31
-
-
... More
New work (Two or more coats applied @ 3.84 kg/10 sqm)
1500
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.).
2000
-
-
... More
400A Digital Ammeter with CTs of ratio 400/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
Manufacture and supply of Table without drawers of size 1200 x 600 x 750 mm made out of 18mm thick MR grade plywood for frame work, top and sides, all exposed playwood surfaces cladded with 1mm thick laminate, all exposed edges to have teakwood beading etc., complete with spirit polish and all as per drawing.
2
-
-
... More
40A, 25KA TPMCCB and 5 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -1no
-
-
-
... More
20A 10KA TPN MCBs -3nos
-
-
-
... More
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like.
-
-
-
... More
3. Activated carbon block - to remove organic chemical (to remove bad small, bad colour)
-
-
-
... More
Providing and fixing CP liquid soap container ofapproved equivalent make of size 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
1
-
-
... More
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
... More
150 mm dia
12
-
-
... More
Supply of officer Table of size 1800 x 900 x 750 mm made out of 18mm thick commercial plywood with 1mm thick lamination of approved brand and shade for frame / box work and top, exposed internal surfaces finished with 0.60mm thick lamination of approved brand and shade, drawer unit with three drawers on sliding channels, key board slide out tray of approved brand, superior quality brushed steel hardware fittings, locking arrangements, teak wood beading / lamination to all exposed edges,un exposed internal surfaces shall be finished with 2 coats of enamel paint and wood primer including surface preparation etc, complete all as directed.
7
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
11705
-
-
... More
Supply of Storewell of size 1981H x 916 x 486D made of multi bend constuction, inter locking design and full length over lapping, doors and side should be provided with three way bolting mechanism, all the steel surfaces shall be anti corrision treated and oven baked powder coating, e top, bottom, sides material thickness should be 0.9mm and back material thickness should be 0.8mm, removable main door with stiffeners of material thickness 0.9mm should be provided. Almirah plain should be provided with 4 plain adjustable shelves of 0.8mm thickness making 5 compartments etc., complete all as per manufacturer's specifications of SLIMLINE 4S model of Godrej make or equivalents of Wipro/Featherlite/Durian/Ikea.
40
-
-
... More
Extra for depths beyond 60 cm of sand cast iron drop connection complete
-
-
-
... More
Supplying and fixing two module 100W stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
300
-
-
... More
Supply, installation ,testing and commissioning &Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
SLUICE VALVES
-
-
-
... More
Supply, installation , Testing and commissioning of 1000 kg kgs gods lifts minor civil works required for installation of lift such as scoffolding, grouting, concreting and masonary work including all accessories. with following detail. (As per OEM)
1
-
-
... More
4Way TPNMCB Vertical type DB with 40A, 4Pole MCB as incomer and 2nos 20A TPMCB & 3nos 6-25A SPMCBs as outgoings.
13
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
5684
-
-
... More
Constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design
1
-
-
... More
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
100
-
-
... More
125A Digital Ammeter with CTs of ratio 120/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
Supply and placement of Visitor chair with seat and back shall be made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of the back shall be 49.0 cm. (W) x 47.0 cm and of seat shall be 49.0 cm. (W) x 44.0 cm. (D). The HR Polyurethane foam shall be moulded with density= 45 ±2 kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The armrest tops shall be injection moulded from black Polypropylene. They shall be fitted to tubular armrest supports made of dia 2.54 ±0.03cm. x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns ). The tubular armrest supports should hold together the seat and back. The tubular frame shall be cantilever type & made of 0 2.54±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). Overall Dimensions of Chair shall be Seat Height - 43.0cm, Height - 80.0cm, Width & Depth of Chair as measured from pedestal - Width-55.0 cm and Depth-61.0 cm. Make Godrej model 7112R or equivalent specification of Wipro/Featherlite/Durian/Ergo/HOF.
65
-
-
... More
3C X 185Sq.mm,11KV (E)
2
-
-
... More
Supply, Installation, Testing and Commissioning of On / off actuator with sensor & also connected to FA panel (Two sets for one damper).
2
-
-
... More
Incoming : 63A,25KA 4Pole MCCB and over load, short circuit, earth fault relay with CBCT -1set
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1set
-
-
-
... More
250A 35KA FP MCCBs – 2nos
-
-
-
... More
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
5434.6
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
100
-
-
... More
400A 50KA FP MCCBs - 3nos
-
-
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge.
-
-
-
... More
Busbars : 250A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
Subhead - XI : Finishing
-
-
-
... More
0-60 mtrs
240
-
-
... More
- Brick chamber & CI Cover complete.
-
-
-
... More
100mm dia
100
-
-
... More
1:4:8 (1 Cement : 4 coarse sand(zone III) : 8 graded stone aggregate 40 mm nominal size)
425
-
-
... More
Metering:
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1set
-
-
-
... More
31. FRD/Fire Man Drive (Fire Rescue Device)
-
-
-
... More
4C x 6 sqmm (Aluminum)
10
-
-
... More
Supply, erection, testing and commissioning of GM gate valves (PN-16) with threaded ends and conforming to IS 778 and of following sizes:
-
-
-
... More
9. High water temperature
-
-
-
... More
101-200 mtrs
400
-
-
... More
12mm cement plaster of mix :
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches - 1set
-
-
-
... More
xx) Distribution board (1 no) - Suitable for 35 KLD FAB
-
-
-
... More
Outgoings :
-
-
-
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
... More
Supply installation Testing and commissioning of Response indicators with LED Indication lamp along with complete fixing accessories.
112
-
-
... More
Supply and fixing of factory made single phase 20A Metalclad socket with 20A SPMCB in MS box including all fixing accessories.
59
-
-
... More
11. Power Supply : 415V 3 Phase 50 cycles AC
-
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
121
-
-
... More
Supply, laying, testing and commissioning of centrifugally Cast Ductile Iron pipes conforming to IS 8329:2000 class K9, with Cement Mortar Lining (CML) inside as per IS 455:2989 along with Bituminous coating outside suitable for socket and spigot type (DISS) joints for following sizes and testing the joints for leakage (if any) and making good hydrant system with all required accessories etc complete.
-
-
-
... More
15. Car door : SS hair line finish.
-
-
-
... More
Supply, Installation, Testing and Commissioning of following capacities of Vairable Refrigerant Flow (VRF / VRV) Outdoor condensing unit comprising of Invertor SCROLL compressor's, Heat Exchanger, propeller / axial fans, refrigerant Circuit, Safety Devices & Oil Recovery System, operating on R410a refrigerant gas. Necessary Refrigerant Gas and oil charge. Compressor shall be equipped with inverter controller of Insulated Gate Bipolar Transistor (IGBT) type to be efficient & quiet. The outdoor unit shall have the multi-step of capacity control to meet load fluctuation and indoor unit individual control. Heat Exchanger shall be constructed with copper tubes mechanically bonded to aluminium fins to form a cross fin coil. Refrigerant Circuit shall include an accumulator, liquid and gas shutoff valves and a solenoid valves. The Outdoor unit shall include the following safety devices : High pressure switch, Low pressure switch, Fan motor safety thermostat, Inverter overload protector, Over Current relay, Fusible plugs, Fuses etc . Unit shall be equipped with an oil recovery system to ensure stable operation with long refrigerant piping. The unit shall be prewired in factory for necessary power and control wiring. All outdoors units shall be mounted with necessary vibration isolators ,Complete clamping and saddling of cabling work and refrigerant piping .
-
-
-
... More
Providing anti corrosive Wrapping and coating with 4 mm thick bitumastic membrane (Pypkote) for DI pipe laid below ground including all materials with minimum overlapping of 30 mm.
100
-
-
... More
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
235
-
-
... More
Supply, Installation, Testing and Commissioning of Lighting switches suitable for Cleanroom Applications
35
-
-
... More
60A Digital Ammeter with CTs of ratio 60/5A, Class 1 Accuracy and 10VA burden and selector switch -1set
-
-
-
... More
Supply, laying and commissioning of following size 1.1KV grade PVC insulated armoured Copper/ Aluminium conductor under ground cable, in built up cable trench/ already laid RCC hume pipe or on cable tray with all installation materials.
-
-
-
... More
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
5797
-
-
... More
Point Wiring for Light with 2 runs of 1100V grade 1.5 Sq.mm & 1 run of 1.5 Sq.mm FRLS insulated multistranded Copper wires , run in & including 25mm dia, heavy guage FRLS PVC conduits concealed in wall / ceiling conforming to IS 732 including all accessories such as junction boxes, conduit bends, elbows and ceiling rose, weather proof (IP55) Switch box with modular switch and the box covered with front plate.
-
-
-
... More
- Earth enhancement compound upto a depth of 2.0meters arround the electrode capsule.
-
-
-
... More
24. Manual Cranking operation
-
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
8940
-
-
... More
Incoming : 250A, 50KA 4Pole MCCB - 1set
-
-
-
... More
Metering For Each Incomer :
-
-
-
... More
250A Digital Ammeter with CTs of ratio 250/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
Supply, Installation, Testing and Commissioning of thermometers as per the specifications and approved drawings.
2
-
-
... More
Supply and stacking of Bauhinia blakeana (Kachnar) plant of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
500
-
-
... More
Supply and fixing of modular type single phase 3nos 6A 5pin shuttered type Socket with 1no 16A switch with front plate and anodised GI box including all fixing accessories.
201
-
-
... More
Automatic PF Improvement Panel
1
-
-
... More
With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7)
350
-
-
... More
32 mm nominal bore.
8
-
-
... More
50 NB
60
-
-
... More
a) Glazed vitreous china below counter Rectangular shaped wash basin of approved brand/ make, shape, size and pattern of (Jaquar make, Model No.CNS-WHT-701 / Parryware / Hindware or Equivalent Approved make)
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m in All kinds of soils
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches- 1 set
-
-
-
... More
40 mm nominal bore
6
-
-
... More
25 x 5 mm hot dip galvanized iron strip
20
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
1:3 (1 cement : 3 fine sand)
12965
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1set.
-
-
-
... More
4core 2.5sq.mm
12
-
-
... More
1 Modular GI box and cover plate
228
-
-
... More
Profile E
120
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
Wiring for light point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class FRLS PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
7. Shaft size required : 2580 x 2110 mm
-
-
-
... More
Supply and stacking of plant Hibiscus rosasinensis of height 60-75 cm.with 5-6 branches in p.bag of size 25 cm as per direction of the officer-in-charge.
400
-
-
... More
Resin cast CTs of ratio 100-200-400-800/5A, Class 1 Accuracy and 15VA burden on R phase for APFCR -1no
-
-
-
... More
4Way TPNMCBDB with 40A, 100mA 4Pole RCBO as incomer and 9 nos 6-25A SPMCBs and 3nos 8KA SP SPDs as outgoings. (LDBs)
12
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
14880
-
-
... More
0-250A Digital Ammeter with CTs of ratio 120-250/5A, Class 1 Accuracy and 15VA burden and selector switch -1set
-
-
-
... More
Supply installation testing and commissioning of 250 mm dia Y- type strainer (with Magnetic elemet) with all necessary flanges, bolts, nuts etc., complete.
2
-
-
... More
510x1040 mm bowl depth 250 mm
4
-
-
... More
Controller Relay (Microprocessor based) with PF Meter - 1set Each Capacitor Bank shall have the following : ON/OFF Indication lamps Ammeter with CTs and selector switch Auto/ Manual Selector switch with 1set of ON/OFF Push buttons for Manual Operation.
-
-
-
... More
The seat/back shall be made up of 1.2 ±0.1cm thick hot pressed plywood measured as per QA method desaribed in OCP-QLTA-P14-18 and upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of back shall be-(W)50.0 cm x (H)49.0 Cm and of seat shall be-50.0 cm (W) x 46.5cm. (D). The HR Polyurethane foamshall be moulded with density 45±2kg/m3-and Hardness load 16 ±2 kgf as.per IS:.7888-for 25% compression.
28
-
-
... More
Providing maintenance free Earth station with consisting of 40mm dia pipe standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, seald at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs. Earth enhancement compound upto a depth of 2.0meters arround the electrode capsule. Brick chamber & CI Cover complete.
28
-
-
... More
Supply of Visitor chair with arms, without castors, cushion at seat and back duly upholsted. The polyurethane foam is moulded density 45±2 kg/m³ and hardsness 20±2 at 25% compression with PU arm rest injection moulded from black co polymer polypropylene. The powder coated tublar frame is cantiliver type and made out of 25.4mm x 2mm thick MS ERW tube etc., complete all as per Model no: BRAVO -FU9U12R of Godrej Make or eqivalents of Wipro/Featherlite/Durian/Ikea.
14
-
-
... More
Hard rock (requiring blasting)
16985
-
-
... More
Supply, Installation, Testing and Commissioning of factory fabricated double skin plenums of suitable to handle the required cfm not exceeding 750 fpm velocity. Appropriate cutout to be made to connect the branch ducts.
25
-
-
... More
Supply, Installation, Testing and Commissioning of Air shower of CRCA powder coated (size 1.2 m X 1.0 m X 2.85m (H))
1
-
-
... More
Two Lights point controlled by one 6A switch.
420
-
-
... More
250A 35KA FP MCCB – 2nos
-
-
-
... More
With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
670
-
-
... More
8 SWG GI Wire
20
-
-
... More
Outgoings :
-
-
-
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages,creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide ,Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.)
2712
-
-
... More
Supply and stacking of plant Hamelia patens (Dwarf ) of height 30-45 cm.with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.
1000
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed I XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted MV panel made out of 2.5mm thick CRCA sheet for main frame and 2mm thick partitions after seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below. The panel shall be got fabricated from manufacturers with CPRI Test certificate only.
-
-
-
... More
Supply and placement of Executive high back chair, The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed moulded reconstituted wood & upholstered with leather and moulded polyurethane foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be (W)-46.0cm, (H)-57.0cm & size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience (HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The back rest should be connected to the mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0+/-0.5cm for the comfortable back support to suitable individual need.
4
-
-
... More
8Stage Automatic PF Controller Relay (Microprocessor based) with PF Meter - 1set Each Capacitor Bank shall have the following : ON/OFF Indication lamps analog Ammeter with 10VA CTs and selector switch Auto/ Manual Selector switch with 1set of ON/OFF Push buttons for Manual Operation. All contactors shall be heavy duty type.The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
39. Civil works: All minor civil works such as scaffolding, making holes, grouting, concreting etc.
-
-
-
... More
HEDGE PLANTATION
-
-
-
... More
Supply, Installation, Testing and Commissioning of Telephone & LAN Dual sockets and associated wiring up to cleanroom exterior suitable for cleanroom applications
10
-
-
... More
22 HP OUT DOOR UNIT
1
-
-
... More
Supply installation testing and commissioning of analogue addressable type UL approved multi sensor (smoke/Heat) photo electric detectors with LED indication lamp, along with mounting base complete with fixing accessories.
158
-
-
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods
and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%),
flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).
60
-
-
... More
Ø 19.1 mm
35
-
-
... More
160A 35KA FP MCCBs - 2nos
-
-
-
... More
All works upto plinth level
20
-
-
... More
v) Air Blowers (2 Nos- 1 W+ 1 S) - Suitable for 35 KLD FAB
-
-
-
... More
3.5C x 35 sqmm (Aluminum)
4
-
-
... More
4-pole 40Amps , 16KA MCB - Spare.
-
-
-
... More
4C X 16Sq.mm
6070
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUMEI METAL pipe as required.
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUMEI METAL pipe as required.
-
-
-
... More
Providing and fixing toilet paper holder
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1 set.
-
-
-
... More
Pipe lines : cPVC for low pressure applications including drains and SS 304 or higher for high pressure and clean water, dispensing lines with necessary fittings and valves - 1 Lot.
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. ( AS per IS 1200 No extra Amount shall be paid for excavation is done beyond 1.5 m depth if the excavation is done by mechanical means ) .
-
-
-
... More
100mm dia
2
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
... More
315KVA
1
-
-
... More
8Way VTPNMCBDB with 63A 4Pole MCCB as incomer and 8 nos 40A TP MCBs as outgoings.
3
-
-
... More
Wiring from Pressure switches for auto operation
-
-
-
... More
Above 120 sq. mm and upto 400 sq. mm
30
-
-
... More
Primary Micron Filter, PP moulded, with PP Spun bonded disposable cartridge 4"x10" of 50 micron rating, - 1 Set.
-
-
-
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
1945
-
-
... More
FPB-1, FPB3, FPB4, FPB5, FPB7, FPB13, FPB16, FPB17, FPB19 (Weather proof double door outdoor type)
9
-
-
... More
Outgoings :
-
-
-
... More
i) Bar Screen (1 No) - Suitable for 35 KLD FAB
-
-
-
... More
100A 35KA FP MCCBs – 1no
-
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
... More
Incoming : 160A, 35KA 4Pole MCCB and over load, short circuit, earth fault relay with CBCT -1set
-
-
-
... More
63A, 25KA TPMCCB with 15 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -1no
-
-
-
... More
Supply of study chairs of size 475x460x780mm made out of 50x30mm teak wood frame work with arms, 50mm rubber foam on seat, upholstered with fabric of approved quality with spirit polish to wooden surfaces.
15
-
-
... More
Providing and fixing head board made out of 18mm ply covered 3.50mm thick veneer 50x12mm thick wood band shall be proved allaround with 25x25 moulding on both sides, wooden faces polished with melamine finish 25mm thik foam cushion upholstered with fabric of approved quality etc all complete.
-
-
-
... More
61-100 mtrs
160
-
-
... More
150 mm diameter S.W. pipe
450
-
-
... More
32NB
100
-
-
... More
The steel sheet shall have brand marking of coated steel manufacturer (product details, date, mfg name, etc) on back side at regular interval confirming genuineness of the material.. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
-
-
-
... More
3.5C X 70 Sq.mm
2720
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
... More
63A,35KA FP MCCB with TVSS – 1set
-
-
-
... More
Busbars : 250A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
60
-
-
... More
1:4:8 (1 Cement : 4 coarse sand(zone III) : 8 graded stone aggregate 40 mm nominal size)
11
-
-
... More
Incoming : 160A, 35KA 4Pole MCCB and over load, short circuit, earth fault relay with CBCT -1set
-
-
-
... More
Single tee with door
-
-
-
... More
125A 35KA FP MCCBs – 2nos
-
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
725
-
-
... More
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :
-
-
-
... More
22 G
250
-
-
... More
Manufacture and supply of single seater sofa of size 700x700x740mm made out of second class hard wood frame work, arm rests shall have 100mm wide x 18mm thick teak wood, flat springs for seat and nawar strips for back, cladded with 100mm thick 40 density foam for seat and 70mm thick 32 density foam for back, 10mm thick medium density poly foam for countering with white cloth lining, upholstered with fabric of approved brand and shade, exposed wooden surface finished with spirit polish etc, complete all as per drawings and as directed.
8
-
-
... More
4C X 16 Sq.mm - Copper
6
-
-
... More
Three Lights point controlled by one 6A switch.
129
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
600
-
-
... More
75x63x4 mm
1343
-
-
... More
CALORIFIERS
-
-
-
... More
Providing maintenance free Earth station with consisting of
54
-
-
... More
Subhead - V : Stone Work
-
-
-
... More
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
6
-
-
... More
Supply of side unit of size 900 x 450 x 625mm made out of 18/12mm commercial plywood with 1mm laminate of approved shade for frame / box work, shelves, shutters,drawers and top, exposed internal surfaces finished with 0.60mm thick lamination of approved brand and shade, drawers with sliding channels, all exposed edges to have teakwood beading, top to have moulded teak wood beading, superior quality brushed steel hardware fittings, locking arrangements, spirit polish finish to all exposed wooden surfaces, un exposed internal surfaces shall be finished with 2 coats of enamel paint and wood primer including surface preparation etc., complete all as directed.
13
-
-
... More
Supply and Fixing of Laminated SLD-A1size
8
-
-
... More
Outgoings :
-
-
-
... More
Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
580
-
-
... More
63/40A 25KA FP MCCBs – 15nos
-
-
-
... More
Providing and Displaying plants Marigold jaffri orange/yellow/Russet colour well developed with fresh & healthy foliage in winter season with 40 to 50 flowers in bloom specimen plant 60 to 75 cm ht in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge.
150
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
175
-
-
... More
With Sewer Bricks conforming to IS: 4885
64
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
6160
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class FRLS PVC conduit as required
-
-
-
... More
63/40A 25KA FP MCCB – 3nos
-
-
-
... More
Supply and erecting 4.5KG Carbon Dioxide (CO2) Fire Extiguisher with necessary clamps made from 50 x 6mm M.S. Flat with Nut & Bolts growted in wall complete.
24
-
-
... More
15 mm nominal bore
4
-
-
... More
Supply & laying in ground
250
-
-
... More
xiv) Filter feed pumps (2 Nos (1W+1S)) - Suitable for 35 KLD FAB
-
-
-
... More
Ø 32 mm
250
-
-
... More
For 100 mm dia sand cast iron drop connection
5
-
-
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) :Vertical (a) 50 mm nominal bore .
2
-
-
... More
ii) Air grid for equalisation tank (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
Supply and placement of Executive high back chair, The cushioned seat assembly shall consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing plastic seat cover. The back shallmade up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-62.0cm & size of seat shall be (W)-52.5cm x (D)-51.0cm.armrest shall be injection moulded with height adjustable up to 4.5+/-0.5cm in 3 steps and width adjustable up to 20mm. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchro mechanism, Tilt tension adjustment, 3 position tilt limiter with Anti-Shock feature. Spine bracket shall made of Aluminium diecast piece connecting back with mechanism. Neck rest assembly shall made up of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back. it can be adjusted up to 4.5+/-0.5cm up-down and has regular adjustment of 30 degree +/-2 .
2
-
-
... More
4C X 10Sq.mm
8
-
-
... More
4C x 2.5 sqmm (Copper)
20
-
-
... More
DAMPERS,GRILLES & DIFFUSERS
-
-
-
... More
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
-
-
-
... More
0-500 V voltmeter with selector switch -1 set
-
-
-
... More
Supply and laying of following size earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid on the parapet with necessary interconnections with earth station and equipments.
-
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
63A,50KA FP MCCB with TVSS - 1set
-
-
-
... More
Busbars : 400A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
10
-
-
... More
65mm dia
2
-
-
... More
3.5C x 25 Sqmm AYFY
50
-
-
... More
xvii) Inter connecting piping and valves for air line (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
80x1.25 mm M.S. laths with 1.25 mm thick top cover
30
-
-
... More
Supply and laying of following size strips including excavation and refilling of each when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and equipments.
-
-
-
... More
The same should undergo 7 steps anti rust and anti corrosion treatment with special hot oil treatment to safeguard against saline and humid conditions. The final product should be powder coated to 80 micron thickness with Epoxy Polyester blend and should meet the following criteria. Working table 2mtrs. Make Godrej model Fami FBIA570 01 04 or equivalent specification of Wipro/Featherlite/Durian/Ergo.
-
-
-
... More
Metering For Each Incomer :
-
-
-
... More
Supply installation testing and commissioning of 110V 100AH Battery charger with 55nos 2V Sealed maintenance free Lead Acid cells including supply of the same and including battery stand as per Technical specifications.
6
-
-
... More
Metering :
-
-
-
... More
Supplying and fixing cable route marker with 10 cm X 10 em X 5 mm thick G.l. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
190
-
-
... More
2.0 TR
35
-
-
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
200
-
-
... More
20A 10KA TPN MCBs -3nos
-
-
-
... More
50 X 5mm Hot dip GI strip
-
-
-
... More
HOT WATER PIPES
-
-
-
... More
Supply and fixing of following HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461, Steel wire mesh cable trays with internal dimensions & load bearing capacities as given below, including couplers, mounting accessories with including all fixing accessories and including 2runs of 25x5mm GI strip along with cable tray etc., complete as required.
-
-
-
... More
Supply & laying in ground
200
-
-
... More
Supply, Installation,Testing and Commissioning of FOUR WAY CASSETTE Type indoor unit. The housing of the unit shall be powder coated galvanised steel andshall include prefilter, fan section, coil section , fan section with low noise fan with Multi speed motor ,condensate drain pump , Insulation, pipe connections , including necessary control wiring, all necessary controls, valves and fittings, strainer, drier , Fresh air intake and operating on R410a refrigerant gas. The fan shall be with Aerodynamically designed diffuser turbo fan type. The cooling coil shall be of seamless copper tubes and shall have aluminium fins. Unit shall have filter cleanable type of resin net fixed to an integrally molded plastic frame. Unit shall have four way supply air grilles on sides and return air grill in center. Unit shall have high lift drain pump, fresh air intake provision, low gas level detection system. Unit shall have an electronic expansion valve which control refrigerant flow rate in respond to load variations of room. Unit to be provided with microprocessor with Corded remote controller LCD type as per the specifications and approved drawings.
-
-
-
... More
Second class teak wood
30
-
-
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
25
-
-
... More
3core 6sq.mm
300
-
-
... More
Gutter .(600 mm over all girth)
130
-
-
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
165
-
-
... More
Holes 0.9 m dia and 0.9 m deep
300
-
-
... More
Providing and Displaying Bird of paradise plant well developed with fresh & healthy 90 to 120 cm ht in 30 cm Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.
25
-
-
... More
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class FRLS PVC conduit as required
-
-
-
... More
(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
-
-
-
... More
Supply, erection, testing and commissioning of pressure gauges with range of 0-10 bar along with isolation cock and pipe for bore wells.
3
-
-
... More
The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:3, Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below. Height from ground - min 93.5 to max 110.5 cm. Seat height - min 41.0cm to max 51.0 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Make Godrej model MARVEL 3312 MB or Equivalent specifications of Wipro/Featherlite/Durian/ HOF/ERGO.
-
-
-
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
44
-
-
... More
WATER COOLERS
-
-
-
... More
Main PCC @ Substation - III
1
-
-
... More
Supply of dining table of size 2400 x 1200mm x 750mm seater made out of teak wood frame of 100x100mm thick for legs and 100x75mm thick frame for horizontal supports with 18mm thick commercial ply with1mm laminate etc; All exposed edges to have TW lipping etc; complete with spirit finish.
1
-
-
... More
Incoming : 2000A, 50KA 4Pole Electrically operated drawout type ACB with digital display and Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set
-
-
-
... More
Range - Head 150m , Discharge - 135 lpm
-
-
-
... More
Incoming : 1000A, 50KA TPN ACB - 1set
-
-
-
... More
Supply and Providing Non flame proof cable end terminations for above cable with Single compression type SS gland, Bi-metallic Heavy duty lugs, insulation tape, identification tags etc. With including Gland Ear thing comlete as required.
-
-
-
... More
VRF CONDENSING UNITS:
-
-
-
... More
400A 50KA FP MCCBs – 2nos
-
-
-
... More
Supply, installation, testing and commissioning of weather proof type box (IP-55) made out of 2 mm thick CRCA sheet including painting with epoxy powder coating. The box shall be consisting of star-delta starter suitable for 3 Cu.m/hr and 200 meters head pump motor with MPCB, contactor, overload relay, ON/ OFF push button. ON/ OFF/ TRIP indications. Ammeter with resin cost Cts and selector switch, Voltmeter with selector switch. The box shall be suitable for terminating suitable cable. The box shall be mounted on suitable angle frame work of 450 mm height on a PCC pedestal including all materials, complete.
3
-
-
... More
GRAVITY MAINS
-
-
-
... More
Supply of Three seater sofa of size 1900x700x740mm made out of second class hard wood frame work, arm rests shall have 100mm wide x 18mm thick teak wood, flat springs for seat and nawar strips for back, cladded with 100mm thick 40 density foam for seat and 70mm thick 32 density foam for back, 10mm thick medium density poly foam for countering with white cloth lining, upholstered with fabric of approved brand and shade, exposed wooden surface finished with melamine polish etc, complete all as per drawings and as directed.
10
-
-
... More
Suction / Delivery - 65 / 50 mm
-
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
58100
-
-
... More
REFRIGERANT PIPING:
-
-
-
... More
REF. NET JOINTS
-
-
-
... More
0-400A Digital Ammeter with CTs of ratio 200-400/5A, Class 1 Accuracy and 15VA burden and selector switch -1set
-
-
-
... More
36W LED recess mounted fixture (Bajaj/Philips/Crompton/Wipro similar Bajaj: BZRSQL 36W GZi WH )
106
-
-
... More
Manufacture and supply of dressing unit for gents of size 600 x 1500 mm made out of 50x30 mm teakwood framework with 5mm thick mirror of approved quality and back with 6mm thick plywood etc., complete with spirit polish and all as per drawing.
2
-
-
... More
250A 35KA FP MCCB – 2nos
-
-
-
... More
Ø 25 mm
50
-
-
... More
Supply and fixing of Metropole flush valve dual flow, 32mm size (concealed body) with exposed shut off provision and 100mm square plate etc all complete. (Jaquar model no. FLV- 1085 SQ / Parryware / Hindware or approved equivalent make.)
2
-
-
... More
Chapter VI : UPS Wiring
-
-
-
... More
10. Car and landing door opening :1100 x 2000mm
-
-
-
... More
Outgoings :
-
-
-
... More
Supply, Installation, Testing and Commissioning of Refrigerant Piping Joint For Liquid Line.
2
-
-
... More
Supply & laying in existing trench / hume pipe
1110
-
-
... More
CENTRAL CONTROLLER
-
-
-
... More
400A 50KA FP MCCBs - 2nos
-
-
-
... More
Supply, Installation, Testing and Commissioning of 3-d corner cove pieces
30
-
-
... More
20A 10KA TPN MCBs -6nos
-
-
-
... More
Using M.S. angles 40x40x6 mm for diagonal braces
30
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
1800
-
-
... More
25 mm thick
355
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. ( AS per IS 1200 No extra Amount shall be paid for excavation is done beyond 1.5 m depth if the excavation is done by mechanical means ) .
-
-
-
... More
Supply of study table of size 1200x600x750mm height with 2 drawers of 150mm high, the top made out of 18mm thick plywood 3.5mm thick veneer duly melamine polished, drawer shall run on powder coated sliding channels etc all complete.
13
-
-
... More
41. Provision for connectivity of CCTV.
-
-
-
... More
Busbars : 400A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
Size of Tile 800x800 mm
140
-
-
... More
1 no. spare feeder with 63 A
-
-
-
... More
Manufacture and supply of Bed side table of size 450 x 450 x400 mm made out of 18mm thick coml.plywood with 1mm laminate having a drawer and internal surfaces to have 0.8mm laminate with teakwood beading for all edges with sprit polish etc., complete.
1
-
-
... More
2 pair
4900
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
1489
-
-
... More
Supply, Installation, Testing and Commissioning of Opposed type GI Zero leakage Volume Control damper with matching flanges of required sizes as per specification and approved drawings.
1
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Second class teak wood
400
-
-
... More
Providing and fixing reception counter of approved pattern of width 600x900mm and height 750x1050mm with 1 No. of storage drawer unit, key board slide out tray of approved make, made out of 18mm thick plywood frame work, exposed ply wood surfaces to have 3.5mm thick veneer of approved shade and design, veneered surfaces shall be finished with melamine polish and internal / un exposed surfaces finished with a coat of wood primer, SS hardware fittings like hinges, handles, lock etc complete all as shown in drawings and as directed.
4
-
-
... More
Providing and fixing of cupboard cum dressing unit of 600mm deep with 4 Nos. openable shutters, two vertical dividers and two shelves made out of 18mm ply wood with 3.5mm thick teak veneer, all exposed edges to have teak wood lipping with melamine polish and limination to internal surfaces etc; all complete as per directions of engineer-in-charge.(Openable shutters and Hardware shall include brass tower bots, 100mm long 'C' type brass/powder coated handles, piono hinges, ball catchers and locks will be paid separately)
35
-
-
... More
Supply, Installation, Testing and Commissioning of Inverter type HI WALL unit -indoor unit with Timer for 12 Hours setting,pre filter, Coil Section ,evaporator section, low noise Multi speed fan ,all refrigerant accessories & corded remote controller with LCD Display.etc as necessary and out door unit with scroll / rotary compressors, refrigerent accessories and condensor fan motor enclosed in a casing sutable for outdoor installation. Power from nearest socket to indoor unit . Unit shall be highest star rated.
-
-
-
... More
125A 35KA FP MCCB – 2nos
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
2000
-
-
... More
25 X 5mm Copper Strip laid in Ground
725
-
-
... More
5 Pair
23
-
-
... More
All kinds of soil
656
-
-
... More
Supply, installation ,testing and commissioning &Providing and fixing CI non- return valve of approved quality (Flanged end) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
23
-
-
... More
Chapter XV : Geysers
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1 set
-
-
-
... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted MV panel made out of 2mm thick CRCA/Galvanised steel enclosure for main frame and 1.6mm thick partitions and shall have IK Certification as per IEC 62262 for mechanical strength/ruggedness, after seven tank process and painting with Epoxy powder coating. The panel shall consist of suitable rating TPN Aluminium busbar (at the rating of 0.8A/Sq.mm) supported with DMC/ SMC barriers and color coded with Heat shrinkable sleeves. The Metering shall be provided as specified. The panel shall have Short circuit withstanding capacity of minimum 50KA and consist of the switchgear as mentioned below.The panel shall be got fabricated from manufacturers as per IEC 61439(Part-1&2). panels shall have IP-55 degree of protection wiith external clear acrylic door . Enclosure shall be modular with bolted design. Enclosure shall be powder coated with RAL-7035 coat with matt finish. Design ambient temperature shall be 50 degree centrigrade. No use of hygroscopic material like FRP/Hylam/Bakellite sheet inside the panel for partitions or any other purpose.
-
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
... More
Supply of steel sofa chair duly powder coated with 100mm cushion on seat and 50mm of upholsteed back with fabric of approved shade and quality.
28
-
-
... More
Supply and laying of 2.5mm thick 11KV grade Rubber Mats as per IS 15652 of size1000mm x2000mm.
60
-
-
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately).
300
-
-
... More
Two or more coats on new work
2500
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
... More
Overload relay , single phasing protection -1 No
-
-
-
... More
White washing with lime to give an even shade
-
-
-
... More
Supply of Display racks of over all size1890 H x 897 mm W x 400 mm D, made of 18 / 12mm ply wood with laminate on both sides for frame work and top hung shutters. Each unit shall havie 5 racks, total for keeping of 15 magazines. Each level shall have storage space behind in order to stack the old magazines. Receding facility to access the storage behind shall be provided with sliding on plastic rollers etc., complete all as shown in drawings and as directed.
3
-
-
... More
Supply and Installation of 2 Way Communication with TALK back facility Mike.
2
-
-
... More
Pipes, cables etc, exceeding 80mm dia but not exceeding 300mm dia
1210
-
-
... More
25 mm nominal bore
6
-
-
... More
Providing Double compression end terminations for the cable specified above with compression type gland, lugs using crimping tool, Insulation tape, Identification tags etc.,including end termination and Earthing of Gland.
-
-
-
... More
19C X 2.5 Sq.mm Copper
100
-
-
... More
Outgoings :
-
-
-
... More
150 mm dia
2
-
-
... More
xxii) Centrifuge system (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
Equipment Panel-2
1
-
-
... More
50mm dia
2
-
-
... More
Busbars : 100A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
2644
-
-
... More
Edging with bricks laid dry length wise, including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50 m :
-
-
-
... More
Supply, Installation, Testing and Commissioning Thermal Insulation of EXPOSED Supply air ducting with 25mm thick closed cell elastrometric Nitrile rubber with of density minimum 43Kg/m3, and fire perfromance to pass Class 1 as per BS 476 Part 7 & class O as per BS 476 part 6 and use recommended adhesives / SR Fevicol 505 grade and covered with 7 mil thick chemically treated woven glass cloth having density 205+/- 10 g/sqm and affixed using synthetic contact adhesive of approved make , further finished with 24G Aluminium cladding as per the specifications and approved drawings.
20
-
-
... More
Metering :
-
-
-
... More
3.5C X 240 Sq.mm
32
-
-
... More
3.5C X 25 Sq.mm
960
-
-
... More
Supply, erection, testing and commissioning of Gun metal Check valve (Non return valve PN-10) conforming to IS 778 with screwed ends type with bolts, nuts and rubber insertions etc., complete and of following sizes:
-
-
-
... More
Resin cast CTs of ratio 50-100-200-400/5A, Class 1 Accuracy and 15VA burden on R phase for APFCR -1no
-
-
-
... More
Ordinary rock
-
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water).
-
-
-
... More
4. Location of Machine Room: Machine room less
-
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including mortar guards, lock strike-plate and shock absorbers including fixing with adjustable lugs with split end tail to each jamb and filling with cement concrete 1:3:6 by using 20mm and down graded metal completeas specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:
-
-
-
... More
Secondary Micron Filter, PP moulded, with PP spun bonded disposable cartridge 4"x10" of 10 micron rating, 1 Set.
-
-
-
... More
Contactor of suitable rating -1 No
-
-
-
... More
SUB HEAD - II : CONCRETE WORK
-
-
-
... More
25 X 5mm Copper strip with DMC Insulated Supports
944.1
-
-
... More
Providing and fixing sheet covering over expansion joints with iron screws as per design.
-
-
-
... More
d) Providing self adhesive copper tape of 100microns thickness and 25mm in width which shall be embedded all around the static dissipative flooring and this copper strip shall be earthed provided on wall
-
-
-
... More
32mm dia
2
-
-
... More
3.2 TR
20
-
-
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge.
-
-
-
... More
Supply,installation,testing and commissioning of 3-Stage Water Purification. Ultra based on a 3-stage advanced filtration process combination of Sediment Filter, Activated Carbon Filter for additional protection from bacteria and UV Disinfection to provide drinking water free from all micro-organisms, thus making it 100% safe. Make - euraka forbes / Aqua guard or Equavalent
11
-
-
... More
Supply installation Testing and commissioning of 11KV 350MVA Indoor HT Vacuum Circuit Breaker Panels consisting of number of Breakers as given below. The VCBs shall be with Motorised Spring Charging (110V DC) mechanism and shall be as per detailed specifications.All VCBs shall have auxilary Relays and Annunciation as specified in Technical specifications.The Closing & Tripping Coils shall be suitable for 110V DC Supply operation, Overcurrent & earth Fault relays as specified in Drawing. All VCBs shall have provision for Remote On/Off and for Remote On/Off Indications wired upto a terminal block. 3nos Surge arrestors of 9KV, 5KA shall be provided as part of HT Breakers/SFU all incoming and outgoing breakers. Bus PTs shall be provided for each bus Sections. The panel shall consist of suitable rating TP Copper busbar (at the rating of 1.2A/Sq.mm).
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
32NB (GM Gate Valve)
2
-
-
... More
40A AC1 Contactor with 230V Coil and a Time switch-1set
-
-
-
... More
3C X 240 sq.mm, 11KV, Indoor
18
-
-
... More
Providing maintenance free Earth station with consisting of
26
-
-
... More
1000A 50KA FP EDO ACBs - 2nos
-
-
-
... More
1Set of DOL Starter suitable for 180LPM, 70 Mtrs head Pump Motor consisting of the following:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
636
-
-
... More
Providing and fixing 300mm deep, 600mm high overhead storage units in kitchen with openable shutters and one shelf inside all made with 18mm thick commercial plywood with approved laminate for top, sides,bottom and for shutters and providing 12mm tick commercial plywood for back, 20x6mm teakwood beading for exposed edges with spirit polish, brass hinges, handles, ball catches etc all complete as directed by engineer-in-charge.
20
-
-
... More
SUB HEAD - IV : BRICK WORK
-
-
-
... More
Outgoings :
-
-
-
... More
Outgoings :
-
-
-
... More
Supply, installation ,testing and commissioning &Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) :
-
-
-
... More
New work (Two or more coats applied @ 3.84 kg/10 sqm)
460
-
-
... More
Supplying and fixing of following modular type sockets housed in GI boxes recessed in walls/ partition / paneling for telephone/ computer/ TV cable socket outlets with all required accessories etc complete.
-
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
-
-
-
... More
Supply, Installation, Testing and Commissioning of Extruded Al. Powder coated continous Grill / Discrete grills with AL extruded black coloured collar dampers for supply air as per the specifications and approved drawings. (Colour to match the false ceiling as per the Client/ Consultant approval)
5
-
-
... More
Supplying, installing ,testing and commissioning of break glass type Manual call point . The Manual call point with monitor module shall be single stage type with all accessories and suitable sinages complete., the Manual call point shall be as per technical specification
24
-
-
... More
Note : Auxiliary relays / contactors / timer for sequence operating for starting and stopping of the engine - 1 set.
-
-
-
... More
Manufacture and supply of table of size 900 x 600 x 750 mm made out of 18mm thick MR grade plywood for frame work, top and sides, drawers with telescopic sliding channels, all exposed playwood surfaces cladded with 1mm thick laminate, all exposed edges to have teakwood beading with one drawer and one shutter with locking arrangements etc., complete with spirit polish and all as per drawing.
3
-
-
... More
c) 1950x950x300mm
18
-
-
... More
CLEAN ROOM INTERNAL FINISHES:
-
-
-
... More
Manufacture and supply of Wooden pointer for classroom demonstrations of size 1200mm long with plastic tip etc., all as per design.
2
-
-
... More
3.5C x 240 Sqmm-AYFY
50
-
-
... More
DRAIN:
-
-
-
... More
63A,35KA FP MCCB with TVSS – 1set
-
-
-
... More
Chapter IV: Power Wiring
-
-
-
... More
36. Safety gears & over speed governer
-
-
-
... More
Earthing
-
-
-
... More
125A 35KA FP MCCBs - 3nos
-
-
-
... More
Serrated with central bulb (225 mm wide, 8-11 mm thick)
370
-
-
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1set
-
-
-
... More
Laying in trench/pipe/tray
30
-
-
... More
600mm dia RCC pipe
250
-
-
... More
Metering For Each Incomer :
-
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
180
-
-
... More
Metering :
-
-
-
... More
Metering For Each Incomer :
-
-
-
... More
C.P. brass
44
-
-
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
b) Double strip (horizontal type)
150
-
-
... More
1 sets of push button stations for the following :
-
-
-
... More
Incoming : 400A, 50KA 4Pole MCCB -1set
-
-
-
... More
Supply of curtains of approved quality including polyester lining, top with buckram backing and tape for curtain rings, top fold 100mm wide, bottom fold 100mm wide, curtain to have three to four pleats in width of finished sizxe of 600mm and 2000mm height etc; complete all asper the directions of Engr-in-charge.
80
-
-
... More
Supply of Suggestion box made of Acrylic body, lock attached, light weighted wall mounted design etc.,complete all as directed by Engineer -in- charge.
1
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
Supply and fixing of Single phase 1no 16A 6pin socket in GI box with 16A switch in separate GI box, both of modular type with front plate complete as required. (Geyser Point)
58
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
Area of slab over 0.50 sqm
36
-
-
... More
Manufacture and supply of pegs set of 6 made out of 18mm thick MR grade plywood cladded with 1mm thick laminate, fixing of S/S pegs with SS screws, all exposed edges to have TW lipping etc., complete with spirit polish and all as per drawing.
3
-
-
... More
Metering For Each Incomer :
-
-
-
... More
With G.I. barbed wire
20840
-
-
... More
24 G
195
-
-
... More
Supplying, Installing, Testing and Commissioning of electrical motor driven end suction top discharge submesible pumps of approved makes, 3 phase, capable of delivering water of capacity and head as mentioned below of 2900 RPM. Complete set shall be mounted on base frame. The quoted rate shall include providing & fixing of flexible coupling, coupling guard, TEFC Efficiency 1 motor, RCC foundation (as recommended by manufacturer) and Foundation bolts etc.
2
-
-
... More
1:4:8 (1 Cement : 4 coarse sand(zone III) : 8 graded stone aggregate 40 mm nominal size)
1980
-
-
... More
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
2115
-
-
... More
Chapter XII : Special Earthing
-
-
-
... More
Supply, erection, testing and commissioning of MS Zero Velocity Valve complete with bolts, nuts, etc. of following size:-
-
-
-
... More
Incoming : 125A, 35KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
Supply and placement of Visitor / conference chair : The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed moulded reconstituted wood & upholstered with leather and moulded polyurethane foam. The back shall be designed with contoured lumber support for extra comfort. Size of back shall be (W)-45.0cm, (H)-49.0cm & size of seat shall be (W)-49.0cm x (D)-49.5cm. High Resilience (HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2 kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The back rest should be connected to the mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0+/-0.5cm for the comfortable back support to suitable individual need. Armrests should be pressure die casted in polished aluminium with PP arm tops.
33
-
-
... More
Excavating, supplying and filling of local earth (including royalty) outside MOD Land by mechanical transport, also including ramming and watering of the earth in layers not exceeding 20cm in trenching, plinth, sides of foundation etc. complete.
32000
-
-
... More
Outgoings :
-
-
-
... More
Drilling and developing of 61/2 inch dia Bore Wells by DTH method in any type of soil, Conducting yield test as per V Notch method and submission of yield report, including filling of filter media clamps, MS Cover etc., complete.
-
-
-
... More
4-pole 63Amps , 16KA MCB - Spare.
-
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class FRLS PVC conduit as required
-
-
-
... More
2000A Indoor
10
-
-
... More
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately
-
-
-
... More
4C X 2.5 Sq.mm Copper
6
-
-
... More
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
67
-
-
... More
Supply and fixing of following HOT DIPP GALVANIZED(GC) AS PER EN-ISO-1461, Steel wire mesh cable trays with internal dimensions & load bearing capacities as given below, including couplers, mounting accessories with including all fixing accessories and including 2runs of 25x5mm GI strip along with cable tray etc., complete as required.
-
-
-
... More
40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
6800
-
-
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Note : Tile Size 300 X450mm are as approved by the Engineer in charge .
Make JOHNSON (Magno-WH ,Magno-HL-1, Magno-GR or Equivalent ) KAJARIA (Vista Décor , Vista pins , Vista Walnet or Equivalent ).
SOMANY ( Casa Daino Dark , Casa Daino Light , Casa Daino - HL or Equivalent ).
2485
-
-
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approved brand/ make, shape, size and pattern, having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (Jaquar make No. URS-WHT-13261 / Parryware / Hindware or Equivalent Approved make)
2
-
-
... More
i) Hedge Plants
5600
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
2325
-
-
... More
Supply and stacking of plant Euphorbia caracasana (bronze colour leaves) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge.
400
-
-
... More
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
1879
-
-
... More
Supply, Installation, Testing and Commissioning Thermal Insulation of EXPOSED Return air ducting with 19mm thick closed cell elastrometric Nitrile rubber with of density minimum 43Kg/m3, and fire perfromance to pass Class 1 as per BS 476 Part 7 & class O as per BS 476 part 6 and use recommended adhesives / SR Fevicol 505 grade and covered with 7 mil thick chemically treated woven glass cloth having density 205+/- 10 g/sqm and affixed using synthetic contact adhesive of approved make further finished with 24G Aluminium cladding as per the specifications and approved drawings.
20
-
-
... More
40A AC1 Contactor with 230V Coil and a Time switch-1set
-
-
-
... More
32 mm dia
45
-
-
... More
Supply and fixing of Air Cushion vessel in Fire pump room with Drain and Safety valves made out of 8 mm thick 2.5 Mtr long 300 mm dia MS pipe.
1
-
-
... More
DRAIN PIPE:
-
-
-
... More
RO PLANT
-
-
-
... More
3.5C X 120 Sq.mm
8
-
-
... More
100 NB
4
-
-
... More
Supplying, Installing, Testing and Commissioning of electrical motor driven end suction top discharge submesible pumps of approved makes, 3 phase,of 2 hp 40x40 size,100Lpm,20 Mtr head with all required accessories etc complete.
16
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made
-
-
-
... More
Disposal of surplus excavated earth over initial lead of 50m and upto a lead of 3 Km
20000
-
-
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
1770
-
-
... More
7. Pump on
-
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
2147
-
-
... More
Flush/ Ruled pointing
125845
-
-
... More
Fabrication,Supply,testing and commissioning coupler of MS to DI of 150mm dia / or directed by engineer incharge with all required accessories etc. complete
1
-
-
... More
Supply, Installation, Testing and Commissioning of Double glazed windows with 5 mm thick glass on both sides including necssary double adhesive tapes & silicon sealant providing in:Internal modular panels of size 900mm x 900mm.
4
-
-
... More
Supply, Installation, Testing and Commissioning of HEPA filter modules in CRCA powder coated finish with provision for DOP & pressure drop measurement suitable for following size filters.
-
-
-
... More
Techical complex-Wing -1 Main panel
1
-
-
... More
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
690
-
-
... More
Supply, Installation, Testing and Commissioning of Clean room compatible Double Leaf Emergency Doors 3000 (W) x3000mm (H) as per specification without door closure
2
-
-
... More
40A, 25KA TPMCCB and 10 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -1no
-
-
-
... More
Main PCC @ Substation - I
1
-
-
... More
6. Engine fails to start
-
-
-
... More
Providing and applying tack coat using bitumen emulsion (Rapid Setting):
-
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
-
-
-
... More
4 WAY CASSETTE UNITS:
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1set
-
-
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
500
-
-
... More
Suction / Delivery - 50/40 mm
-
-
-
... More
Upto 5mm depth and 5 mm width
1960
-
-
... More
Ø 6.4 mm
610
-
-
... More
80mm dia
200
-
-
... More
Ordinary rock
900
-
-
... More
6. Serving : 3 stops, 3 levels, 3 openings
-
-
-
... More
4C X 4 Sq.mm Copper
6
-
-
... More
Chapter XVII - External Water Supply
-
-
-
... More
g) 32mm PVC waste pipe with specials from extension piece of the bottle trap to the floor trap, length not exceeding 1mtr.concealed in the wall.
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m
-
-
-
... More
Supply & laying in ground
750
-
-
... More
Add / deduct for using extra / less cement in the items of design mix over and above the specified cement content therein.
5
-
-
... More
4C X 16 Sq.mm
1040
-
-
... More
Supply & laying in ground
360
-
-
... More
Chapter XVI - Roads and CD works
-
-
-
... More
Subhead - XIV : Aluminium Work
-
-
-
... More
Supply of dining chair of overall size 430x520x720mm made with teak wood frame out of 38x38mm with flat springs and 50mm thick high density foam for the seat and 25mm thick for back covered with approved fabric over white cloth, chair polished in melamine finish all complete.
74
-
-
... More
Flush/ Ruled pointing
200
-
-
... More
Supply, installation, testing and commissioning of Addressable control modules along with all fixing accessories.
4
-
-
... More
Common burnt clay F.P.S. (non modular) bricks of class designation 7.5
200
-
-
... More
FPB-6 (Weather proof double door outdoor type)
1
-
-
... More
Ø 41.3 mm
55
-
-
... More
33. Door Safety : PANA 40-Full ray curtain for car door safety.
-
-
-
... More
Supplying and fixing of PVC cowl of 100 mm dia of approved brand, quality etc., all complete.
32
-
-
... More
28. Pit ladder and ballustrade
-
-
-
... More
Supply and laying of following size strips including excavation in any type of soil including SDR & hard rock and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and equipments.
-
-
-
... More
Voltmeter, Ammeters, Indication lamps shall be provided as required.
-
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 395x395 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete Make JOHNSON ( Croma flurry/ Rosso Verona or Equivalent ) KAJARIA (K-6208/6201 or Equivalent ).
SOMANY ( Nuvaro Mocha/Decia grey walia or Equivalent ).
440
-
-
... More
Supply, Installation, Testing, & Commissioning of AHU kits, with all necessary equipment to control the flow of refrigerent as per the load conditions, etc, as per the specifications
1
-
-
... More
150 mm x 100 mm
8
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
-
-
-
... More
3.5C X 25Sq.mm- Copper
420
-
-
... More
100 mm dia
4
-
-
... More
Supply, Installation, Testing & Commissioning of 63A MCB enclosed in a IP65 protection box suitable for outdoor application near VRF Outdoor Unit.
1
-
-
... More
3. Type of Drive: Variable Voltage Frequency Drive V3F.
-
-
-
... More
Supply, Installation, Testing and Commissioning of Hard copper REFRIGERANT PIPING of 16swg various sizes with necessary supports, fittings, interconnecting the liquid and suction lines between the aircooled outdoor units and the indoor units. The piping shall be carried out of Hard drawn copper pipes of type 'K with soldered / brazed socket fittings. Isolating valves shall be provided to isolate each compressor, strainers, sight glass and any other component requiring proper operation and maintenance. Both the suction and liquid lines shall be insulated with 19mm thick closed cell insulation for above 25mm dia , 13mm thick for pipes below 25mm dia . The insulation finished with treated woven glass fiber reinforced covering for inside Piping and including making required holes in the wall and re finishing and water tight of holes after laying holes as per the specifications and approved drawings.
-
-
-
... More
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.
5350
-
-
... More
25 NB
3
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
323
-
-
... More
3.5CX70 SQ.MM- Copper
480
-
-
... More
Busbars : 400A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
Supply, Installation, Testing and Commissioning of Wall to floor epoxy coving
95
-
-
... More
Supply of display board of size 1800 x 1200mm made out of alluminium frame having sooft board of thickness 9mm with overall pinnability depth 15mm with Felt material of 1mm thick of approved shade ,GIsheet for rear panel including necessary hardware fittings etc;complete all as per Alkosign make or approved equivalents.
16
-
-
... More
- 40mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, seald at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs.
-
-
-
... More
30. Emergency cabin lighting and alarm.
-
-
-
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
4Way VTPNMCBDB with 63A, 16KA, 4Pole MCCB as incomer and 2nos 63A TP MCBs & 6nos 6-25A SPMCBs and as outgoings.
5
-
-
... More
10W LED Bulk Head Light Fixture (Bajaj/Philips/Crompton/Wipro similar Bajaj : BIBWP 10W LED)
87
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches- 1 set.
-
-
-
... More
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Make JOHNSON ( Croma flurry/ Rosso Verona or Equivalent ) KAJARIA (K-6208/6201 or Equivalent ).
SOMANY ( Nuvaro Mocha/Decia grey walia or Equivalent ).
54
-
-
... More
50 X 5mm Copper strip with sleeve
60
-
-
... More
With rapid setting bitumen emulsion
-
-
-
... More
0-2000A Digital Ammeter with resin cast CTs of ratio 1000-2000/5A, Class 1 Accuracy and 15VA burden and selector switch -1set.
-
-
-
... More
i) Trees : 192 Sqm
-
-
-
... More
DRAIN PIPE:
-
-
-
... More
63/40A 25KA FP MCCB – 3nos
-
-
-
... More
63A 35KA FP MCCB with TVSS – 1no
-
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
-
-
-
... More
Supply and providing PCC route marker at an interval of 100 mtrs and road junction.
100
-
-
... More
Supplying, Laying and fixing in position under floor against wall in chases PVC SWR drainage pipes and specials, rubber rings conforming to IS13592 Type "B" of "Supreme" or Equivalent approved make as per manufacturers specification including cutting the pipes to required lengths, necessary excavation, chasing the walls and concrete surfaces and restoring to original conditions, testing etc complete all as per drawing and as directed by the Engineer in charge. (Specials at Junction of lateral pipe and vertical stack must have access door for inspection)
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
Busbars : 2000A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.
990
-
-
... More
2000-1000-500-250/5A 15VA CT in R Phase for APFCR -1set
-
-
-
... More
40A,25KA TPMCCB with suitable capacitor duty rating Contactor and 10 KVAR MPP 440V Delta connected heavy duty Capacitor Banks - 2nos
-
-
-
... More
20 mm nominal outer dia Pipes
141
-
-
... More
FPB-9 (Weather proof double door outdoor type)
1
-
-
... More
Supply of dining table of size 1200 x 1200mm seater made out of teak wood frame of 75x75mm thick for legs and 100x35mm thick frame for horizontal supports with 18mm thick commercial ply with1mm laminateetc; All exposed edges to have TW lipping etc; complete in melamine finish.
9
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavatedearth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts ofstacked volume of earth after reduction by 20% : 1 part of stacked volumeof manure after reduction by 8%) flooding with water, dressing includingremoval of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :
-
-
-
... More
Peg Table of size 450mm x 450mm x 400mm made out of teak wood frame with side rail of 70mm x 25 mm and 60 x 60 mm teakwood legs.Top to have with 10mm thick glass with ss studs etc;complete with Melamine polish
14
-
-
... More
Executive back unit of 2350 x 450 x 1800 mm deep made out of 19 mm thick commercial board with front, side and top 4 mm thick teak veneer with Drawer and shutters ,drawers ride on Quadro sliding channels, top to have 35 mm thick and joint with table, back covered with 6 mm thick commercial ply, all edges covered with teak wood lipping including finished with PU polish and all internal surface finished with .08mm thick lamination etc. all complete.
-
-
-
... More
2. Engine Stop
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
3C x 2.5 Sqmm Copper
50
-
-
... More
Supply of Sr. Executive Table of curve shape of size 2350 x 1050 x 750mm made out of 19mm thick commercial board with 4mm thick Teak veneer in Double (Decorative) pattern & top to have 30mm thick, front. having 4 Nos drawers (Right/Left) ride on Quadro Sliding channels, with locking arrangment with teak wood foot rest of size 100 x 30, all exposed edges to have teak wooden Beading and top to have finish with PU polish and inner sides with 0.8 lamination etc. all complete. as per direction Engineer-in-Charge.
3
-
-
... More
3.5C X 70 Sq.mm Straight Through joints
2
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1 set
-
-
-
... More
1 set of indicating lamps for the following :
-
-
-
... More
100A, 35KA FPMCCB with suitable capacitor duty rating Contactor and 25 KVAR MPP 440V Delta connected heavy duty Capacitor Banks - 2nos
-
-
-
... More
Outgoings :
-
-
-
... More
Providing pair of rubber hand gloves suitable for working on 11 KV
7
-
-
... More
Supply, erection and commissioning of individual 3mtr (600mm below Ground) high 50mm dia Class B GI pole, 750mm out reach single arm complete with base plate FRP terminal box, wiring from terminal box to the fixture with 3core 2.5Sq.mm multistrand Copper conductor cable, MCB control and 2nos of 40mm dia class B GI pipe for incoming and outgoing cables as per drawings etc including PCC foundations, pedestal and Supply and installation of 36W LED Lamp Post top Lantern fixture. (Bajaj/Philips/Crompton/Wipro similar to Bajaj :BRIL 45W LED NW)
60
-
-
... More
Providing and fixing curtain rods of 1.25 mm thick chromium platedbrass plate, with two chromium plated brass brackets fixed with C.P.brass screws and wooden plugs, etc., wherever necessary complete :
a) 20 mm dia
150
-
-
... More
200 mm diameter
100
-
-
... More
Nominal Cooling Capacity at ARI conditions
-
-
-
... More
Fixed to openings /wooden frames with rawl plugs screws etc
10430
-
-
... More
63A 25KA FP MCCB with TVSS – 1no
-
-
-
... More
Providing Polysulphide sealant in Expansion Joints /RCC Slabs/ Beams etc. The joints shall be of size 25mm wide & 10mm deep using sealant of approved make. The work shall be executed strictly as per manufacturers' specifications etc.Complete all as per directions of Engineer in Charge at all Heights/ Levels.
60
-
-
... More
a) 1950x1800x300mm
2
-
-
... More
20A 10KA TPN MCBs -3Nos
-
-
-
... More
4C X 10Sq.mm
710
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
2.0 TR
21
-
-
... More
100mm dia Ductile Iron Class K-9 Pipes
100
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1 set
-
-
-
... More
Subhead - VII : Wood and PVC Work
-
-
-
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire
of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :
-
-
-
... More
125A 35KA FP MCCBs – 2nos
-
-
-
... More
4C x 16 sq.mm. (Copper) (for outdoor Units)
110
-
-
... More
a) 600x450x450mm
9
-
-
... More
5 Travel in Mtrs: 12meters approx.
-
-
-
... More
125A 25KA FP MCCB – 5nos
-
-
-
... More
Supply of Patients waiting chair made out of 18 guage round pipe frame work with preforated sheet with powerder coating of approved shade etc., complete all as per Model no PERCH of godrej make or eqivalents of Wipro/Featherlite/Durian/Ikea.
-
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
Outgoings :
-
-
-
... More
Supply, Installation, Testing and Commissioning of butterfly / isolation valve's with bolt & nuts, insulation including clearing and transportation suitable for hot water, As per specification,as per the specifications and approved drawings.
-
-
-
... More
4Core 10 sq.mm
3349
-
-
... More
Above 120 sq. mm and upto 400 sq. mm
822
-
-
... More
40A AC1 Contactor with 230V Coil and a Time switch-1set
-
-
-
... More
xviii) Inter connecting piping and valves for sewage line (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
Design,Supply, installation and testing and commissioning of double Skin AHU's With 50 mm Sand witched PUF Insulation, Thermal break profile with 0.8mm GI outer skin and 0.63mm GI painted inner skin comprising of Mixing box section for fresh air module and RA connections, pre filter section with 10 micron washable filters of 90% efficiency, fine filter section , 5 micron filters of 97% efficiency , coil section with 6 Row DX Coil (Twin Circuit VRF Outdoor connectivity) and 2 row hot water coil complete with necssary expansion valves distributer nozzles and drift eliminator of ABS construction, , Fan section with Plug Fan , TEFC(IE-2) motor, Variable speed drive with flow controller , spring isolators & fire retardant canvass connection at the outlet of fan, and provision to fix damper at the inlet/outlet of AHU etc as per Specification , Validation and documentation of the complete facility as per the ISO 14644 Clean Room standards for ISO Class 6 'at rest' conditions . This shall include - Air Particulate count using Laser Particle counter, temp & RH checks, differential pressures,air changes,filter integrity tests,air flow pattern (by VEDIO) ,duct leak test ,by department approved third party. Standard as applicable for Clean Rooms. Digital Thermostat with remote sensing element to be included ,as per specification.
-
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
... More
250A 35KA FP MCCBs – 2nos
-
-
-
... More
3.5C x 25 sqmm (Aluminum)
12
-
-
... More
Outgoings :
-
-
-
... More
Control Cables
-
-
-
... More
c) Surface resistivity in case of static dissipative type is between 106 and 109 ohms when measured for surface resistance in accordance with BS2050: 1978 (A-1984) and DIN/EN 1081. (The minimum value shall not be less than 106 ohms).
-
-
-
... More
Chess Tower-3
1
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed heavy class FRLS conduit as required
-
-
-
... More
“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
... More
Supply and fixing of Dressing mirror of size 600 x 1500 mm height, 5mm thick mirror fixed on 6mm thick commercial plywood backing made out of 20mm x 20mm TW frame ,600mm drawer made out of 18 mm thick commercial plywood with 1mm thick lamination external,drawer shall run on powder coated sliding channels,necessary handles all as per drawing including finishing with spirit polish etc., complete as directed by Engineer-in-charge.
12
-
-
... More
ON/OFF/TRIP LED indication Lams -1 Set
-
-
-
... More
MV Cables
-
-
-
... More
Providing and fixing ball bearing for rolling shutters.
6
-
-
... More
With 20 x 20 mm Square bar
245
-
-
... More
100 mm dia pipes
120
-
-
... More
40A,25KA FPMCCB with suitable capacitor duty rating Contactor and 10 KVAR MPP 440V Delta connected heavy duty Capacitor Banks - 2nos
-
-
-
... More
80W LED High bay Light Fixture (Bajaj/Philips/Crompton/Wipro similar Bajaj : BGHBM 80W LED XE)
12
-
-
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m
-
-
-
... More
0-250A Digital Ammeter with CTs of ratio 250/5A, Class 1 Accuracy and 15VA burden and selector switch -1 set.
-
-
-
... More
Supply and stacking of the following well developed,healthy,true to variety/type plants having minimum height as below mentioned at site work.
-
-
-
... More
Up to 300 mm dia
50
-
-
... More
610x510 mm bowl depth 200 mm
2
-
-
... More
Main PCC @ Substation - IV
1
-
-
... More
shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
2800
-
-
... More
18W LED Decorative Wall mounted light Fixture (Bajaj/Philips/Crompton/Wipro similar Philips : PHILIPS 36062 QWG305)
27
-
-
... More
Incoming : 400A, 50KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
Supply of Luggage rack in two tier of size 900x 600 x 500mm made out of 45 x 45mm frame work on top, sides with 75 x 25 mm TW section with 30 x 15 mm TW planks on top and bottom etc., with spirit polish.
12
-
-
... More
23. 3-Way Intercom
-
-
-
... More
Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.
2300
-
-
... More
400A 50KA FP MCCBs - 2nos
-
-
-
... More
4Way TPNMCBDB with 63A, 100mA 4Pole RCBO as incomer and 9nos 6-25A SPMCBs and 3nos 8KA SP SPDs as outgoings.
6
-
-
... More
6. Power Supply - SMPS / Copper Adopter
-
-
-
... More
Supply, Installation, Testing and Commissioning of flexible connections as per the specifications and approved drawings.
-
-
-
... More
Outgoings :
-
-
-
... More
Outgoings :
-
-
-
... More
3.5C X 240 Sq.mm Straight Through joints
1
-
-
... More
4Core 6 sq.mm
109
-
-
... More
Incoming : 400A, 35KA 4Pole MCCB and over load, short circuit, earth fault relay with CBCT -1set
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
6500
-
-
... More
Supply of study table of size 1200x750x750mm made out of 18mm thick plywood 1mm thick lamination to sides and top and having one drawer and one shelf with locking arrangement, all exposed edges to have teak wood beading, spirit polishing etc all complete.
15
-
-
... More
150 NB
50
-
-
... More
1: 3 (1 cement : 3 fine sand)
40
-
-
... More
15 mm nominal outer dia Pipes
120
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
... More
For 500x700 mm size
-
-
-
... More
40NB (Borewell to sump)
50
-
-
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately
39375
-
-
... More
Providing maintenance free Earth station with consisting of 65mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, seald at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs.Earth enhancement compound upto a depth of 2.0meters arround the electrode capsule. Brick chamber & CI Cover complete.
2
-
-
... More
3 Breaker panel( Indoor Type)
3
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1 set.
-
-
-
... More
40A,25KA TPMCCB with suitable capacitor duty rating Contactor and 5 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -1no
-
-
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
600
-
-
... More
Supply and fixing of 25mm dia 16SWG MS conduit concealed/ Surface in wall/ Ceiling/ above false ceiling including painting with 2 coats of Red colour paint for exposed part and all fixing accessories/ materials
2020
-
-
... More
3.5C X 120 Sq.mm
325
-
-
... More
50NB (Borewell)
100
-
-
... More
Incomer : 400 Amps 4P MCCB having SC release and thermal over load element inbuilt with setting range between 40-100% -1 No; Busbar : 400A TPN Aluminium Busbar-1 Set; And Out Goings:
-
-
-
... More
Two Light point controlled by one 6A switch.
24
-
-
... More
4Core 16 sq.mm
3835
-
-
... More
Above MCCBs should have in built SC release and thermal over load element with setting range between 40 - 100% as per standard
-
-
-
... More
Supply,Installation of Exit Signages with strobe light
3
-
-
... More
HT Cables
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
Incoming : 100A,35KA 4Pole MCCB - 1set
-
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
8000
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
-
-
... More
MV Control Cables
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1 set
-
-
-
... More
Jockey pump
-
-
-
... More
4Core 2.5 sq.mm Copper
455
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
11452
-
-
... More
Supply, installation, testing and commissioning of weather proof type analogue addressable Manual call points ( along with monitor modules) with glass and hammer on Stand post made out of 1500 mm long 50x50x6mm Galvanised channel fixed in ground with concrete coping as required.
8
-
-
... More
4C x 2.5 sqmm (Copper)
75
-
-
... More
Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
432
-
-
... More
b) 450x450x450mm
8
-
-
... More
SUBSTATION ACCESSORIES
-
-
-
... More
20 mm nominal bore
2
-
-
... More
Upto 450 mm sweep
175
-
-
... More
2. Speed Approx: 1.5 meter/second (As per OEM)
-
-
-
... More
Providing maintenance free Earth station with consisting of
60
-
-
... More
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) trasperant or dyed to required colour or shade, with nuts and screws etc., complete.
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
37. Infra red door safety device
-
-
-
... More
Supply and fixing of Danger Notice boards (in 3languages including local)
20
-
-
... More
Single Breaker panel (Outdoor type)
1
-
-
... More
Supply and stacking of plant Thevetia nerifolia of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.
1000
-
-
... More
Supply, installation, testing and commissioning of Addressable BEAM detector along with the required mounting accessories. It shall be operating on light obscuration principle utilizing Infra red optical beam with combined transmitter and receiver unit on one side and reflector on the other side. It shall be loop powered further shall sit on the same loop with other addressable devices (Conventional detector with module shall be rejected)
2
-
-
... More
Excavating, supplying and filling of local earth (including royalty) within MOD land by mechanical transport up to a lead of 5km, also including ramming and watering of the earth in layers not exceeding 20cm in trenching, plinth, sides of foundation etc. complete.
1850
-
-
... More
32A 10KA FP MCBs - 6nos
-
-
-
... More
Supply, Installation, Testing of Garment cubicle of 15 pairs CRCA powder coated
1
-
-
... More
Equipment Panel-1
1
-
-
... More
Manufacture, supply and fixing of Reception Counter of 1050 mm height made out of 18mm MR grade plywood cladded with 1 mm laminate for front, top, sides and one No. of storage unit to have one drawer and one shutter having shelf with locking arrangement and key board pull out tray, all exposed edges to have teakwood beading, all hardware fitting in S/S finish, all exposed surface with spirit polish etc., complete all as per drawing.
3
-
-
... More
Cutting grooves 5mm x 12mm deep in Vaccum dewatered flooring with diamond saw cutting machine before the concrete is 7days old including providing & filling the grooves with poly sulphide of approved make or equivalent (modified semi-rigid epoxy joint filler).
550
-
-
... More
Hard rock (requiring blasting)
39450
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size direct in ground including excavation, sand cushioning,protective covering and refilling the trench etc. as required.
-
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
... More
40 mm
91
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
-
-
-
... More
Ø 12.7 mm
195
-
-
... More
Two or more coats on new works including a coat of wood filler
760
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed XLPE FRLS power cable of 1.1 kV grade of following size on cable tray as required.
-
-
-
... More
The pedestial shall be fabricated from 0.2+/-0.02cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap. The size of the pedestal shall be 66.0+/- 0.5 cm pitch-centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 76.0cm as measured from pedestal below. Height from ground - min 89.0 to max 105.0cm. Seat height - min 46.5 to max 55.5cm. Dimensions tolerance / variations shall be within +/- 1 cm. etc; complete all as per Make Godrej model KAREENA or Equivalent specifications of Wipro/Featherlite/Durian/ HOF/ERGO.
-
-
-
... More
Laying in ground
30
-
-
... More
Upto 35 sq. mm
1175
-
-
... More
Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
... More
7. Membranes - TFC / HI-TECH - To remove organic Chemical hardness High TDS
-
-
-
... More
INSULATION
-
-
-
... More
Permanent office accommodation. Per Sqm
(as per yard stick 1Mali =1.25Acre)
-
-
-
... More
Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 metre
20
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
63A,50KA FP MCCB with TVSS – 1set
-
-
-
... More
5 Travel in Mtrs: 12 meters approx.
-
-
-
... More
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in -charge
2000
-
-
... More
Supply of corner table of size 450x450x400mm with frame and legs made out of 60x35mm teak wood sections, top frame and legs polished in melamine finish. Top to have 10mm thick bevelled and etched glass.
16
-
-
... More
40NB (GM Gate Valve)
2
-
-
... More
14. Car enclosure : SS Hair line finish
-
-
-
... More
Outgoings 1 : 800A VCBs with Ammeter with CTs, Load Manager with RS 485 (PM 8000) with Modbus connectivity, PF meter, Overcurrent & Earth Fault Numerical relay, Auxilary Relays for Winding temperature alarm & Trip , OLTC surge relay alarm, Phase Indication Lamps, Breaker On/Off/ Trip and Spring Charge, trip circuit healthy Indications etc., - 1no (As Transformer Controlling Breaker)
-
-
-
... More
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
... More
250A Digital Ammeter with CTs of ratio 250-120/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
Laying and fixing of one number PVC insulated and PVC sheathed XLPE FRLS power cable of 1.1 kV grade of following size on cable tray as required.
-
-
-
... More
4Core 16 sq.mm
7550
-
-
... More
Incoming : 400A, 35KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
160 mm diameter
690
-
-
... More
2. Secondary bowl - Sediment filter 1 micron - to remove suspended dust particle.
-
-
-
... More
450KVAR IGBT based Hybrid Automatic PF Improvement Panel
-
-
-
... More
Supply and installation of vertical air termination with 40mm dia copper hollow sphere with spikes, fixed on 1000mm length 25mm dia Copper rod including PCC block and all fixing accessories.
43
-
-
... More
50 mm dia nominal bore
388
-
-
... More
Internal work - Exposed on wall
-
-
-
... More
1. The free trial runoff period for the STP shall be one month or till stabilization of STP units to provide desired treatment efficiencies which ever is later.
-
-
-
... More
Metering For Each Incomer :
-
-
-
... More
50 HP OUT DOOR UNIT (18+16+16)
1
-
-
... More
Ceiling Fans
-
-
-
... More
2. The treatment shall be to the standards of tertiary treatment satisfying the following outlet parameters
-
-
-
... More
800A 50KA 4Pole MCCB
1
-
-
... More
Supply and stacking of Peltophorum species plant of height 150-165 cm.in big poly bags of size 25 cm as per direction of the officer-in-charge.
500
-
-
... More
Providing and fixing square-mouth SW gully trap Class SP-1 complete with CI grating brick masonry chamber with water tight CI cover with frame of 300x300mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
... More
Ø 32 mm
780
-
-
... More
For MCCB with Microprocessor based release : A common indication LED for internal temp/ fault/alarm . MCCB should have in-built feature of logical selectivity by which it can give a time delay of 50msec between upstream and downstream MCCB & ACB. The microprocessor based release should have the following settings:
• Overload Settings: 0.4 to 1 times of Ir
• Short Circuit Settings: 1.25 to 10 times of Ir.
• Earth fault Settings: 0.2 to 1 times of In.
• Neutral protection settings: 0 – 50% – 100%Ir. • Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. • MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) • The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material.
-
-
-
... More
Supplying, transporting to site and erecting factory fabricated Pre-Engineered Building (PEB) including submission of shop drawings for approval, including all the materials required at site viz, Primer members such as columns, bracing members, etc and with necessary accessories, sweep blasting, applying one coat of zinc chromate primer and two coats of synthetic enamel paint all as directed by Engineer-in-charge. Steel shall be high grade of strength not less than 345 MPa etc., complete design all as per IS:800-2007(LSD) including Chapter 12 and the erection shall be carried out at 9.0m level etc., complete
50
-
-
... More
All kinds of soil.
3890
-
-
... More
Manufacture and supply of dining table of size 1500 x 900 x 750mm height made out of 75 x 75mm size teak wood in approved pattern for legs, 100 x 35mm thick teak wood under structure / frame work, top with 18mm thick MR graded playwood cladded with 1mm thick laminate, all exposed ply wood surfaces to have teak wook lipping, teak wood surfaces finished with spirit polish and internal / un exposed surfaces finished with a coat of wood primer etc., complete all as per drawings and as directed.
4
-
-
... More
Supply, testing & commisioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor cable.The cable shall conform to IS 7098/ Part I.
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m :
-
-
-
... More
4way
8
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
-
-
-
... More
4C X 10Sq.mm
12
-
-
... More
Metering For Each Incomer :
-
-
-
... More
Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.
-
-
-
... More
REFRIGERANT PIPING:
-
-
-
... More
Electrical operated pumps
-
-
-
... More
Earthing
-
-
-
... More
Kitchen sink with drain board
-
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
Supply of crockery cabinet of size 2400x450x750mm made out of 18mm thick plywood with 1mm thick laminate top and sides,18mm thick granite cover on top two drawers and four shutters as shown in the drawing with spirit polish, including providing hardware fittings like hinges, ball catches etc complete as per drawing and as directed by engineer-in-charge.
1
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
12810
-
-
... More
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
-
-
-
... More
Supply, Installation, Testing & Commissioning of Zonal Anouncement.
1
-
-
... More
- Brick chamber & CI Cover complete.
-
-
-
... More
ELECTRICAL
-
-
-
... More
Auxiliary contactor 2 Nos. each per MCCB 0-500 V analog voltmeter with selector switch. 0-630 A analog ammeter of size 96 X 96 mm and selector switch with CT ratio. 630/5A, Class 1 accuracy and 15A burden. The MCCB shall consist of load manager for measuring Voltage, Amp's, power factor, frequency,energy consumption , hours of operation and fault trip indication
-
-
-
... More
2 Module (75mmX75mm)
300
-
-
... More
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
178
-
-
... More
Ammeter with cast resin CTs and selector switch -1 set
-
-
-
... More
Conference table for 14 seater of size 4500 x 1500 /1200 x750mm made out of 19 mm thick commercial board with 4 mm teak veneer & top to have 40mm thick with 4mm thick teak and italian veneer on top in designer pattern and 19 mm thick commercial board tapered foot rest, vertical member with 19mm thick commercial board. Back with 19mm thick commercial board including 4 mm thick teak veneer all exposed edges to have teak wood beading including PU polishing etc. all complete.
2
-
-
... More
Providing Spiral coil earthing with 8 SWG GI wire with 115 turns of 50mm dia including earth work excavation in all kinds of soil, SDR and hard rock, spreading of salt and charcoal, back filling as per IS 3043/87 with latest amendments and shall also include interconnection with pole and earth station etc., complete. as per schematic.
219
-
-
... More
Providing and fixing in position wall panelling with 12mm thick MDF panels fixed in position with frame work made of aluminium in 600 x 1200 mm c/c spacing and fixing 6mm thick ply wood of approved brand and make on MDF panel and fixing 4mm thick teak veneer of approved shade and colour over ply wood including all necessary accessories for fixing and polishing the veneer / painting etc., complete for finished item of work as shown in the Architectural drawing (Aluminium frame work shall be measured under relevant item)
320
-
-
... More
Supply of dining table 1200mm dia, 4 seater made out of teak wood frame of 75x75mm thick for legs and 100x35mm tick for horizontal supports with 12mm thick bevelled and etched and wooden surface glass top polished in melamine finish etc all complete.
4
-
-
... More
Ordinary rock
37
-
-
... More
Each Capacitor Bank shall have the following : ON/OFF Indication lamps Ammeter with CTs and selector switch Manual Selector switch with 1set of ON/OFF Push buttons for Manual Operation. The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Supply, erection, testing and commissioning of Brass / GM / Bronze Air Release valves with threaded ends of following sizes:
-
-
-
... More
3. Type of Drive: Variable Voltage Frequency Drive V3F.
-
-
-
... More
150 mm x 150 mm x 100 mm dia
2
-
-
... More
160A 35KA FP MCCBs – 2nos
-
-
-
... More
125A 35KA FP MCCB – 1no
-
-
-
... More
Supply & laying in existing trench / hume pipe
200
-
-
... More
3.5C x 35 sqmm (Aluminum)
60
-
-
... More
Supply & fixing 63 mm dia Cotton Synthetic Fibre (RRL) Woven rubber lined fire hose treated against rot with MYSTOX, conforming to IS 636 type 'A' bounded with male and female instantaneous G.M. couplings and of length of 30 M.
12
-
-
... More
Automatic PF Improvement Panel
1
-
-
... More
Supply and fixing of factory made single phase 20A Metalclad socket with 20A SPMCB in MS box including all fixing accessories.
2
-
-
... More
8 SWG GI Wire
200
-
-
... More
Supply installation testing and commissioning of Fire brigade inlet with 4 built in inlets with NRV and One Sluice valve with glass cover box and interconnections suitable for working pressure.
1
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
... More
Ø 50 mm
1
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
100
-
-
... More
Providing and fixing in position pre-cast RCC manhole cover and frame of required shape and approved quality
-
-
-
... More
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
-
-
-
... More
OUTGOING: 4-pole 63Amps,16KA MCB - 2 Nos.
-
-
-
... More
CT Operated Load manager with RS 485 (Similar to EM-6400NG) – 1set
-
-
-
... More
32 X 5mm Aluminium strip conductor with DMC Insulated Supports & including PCC Blocks.
2086
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
1609
-
-
... More
Supply of Buffet table of size 2400 x 900mm x750mm seater made out of teak wood frame of 100x100mm thick for legs and 100x75mm thick frame for horizontal supports with 18mm thick commercial ply with1mm laminate etc; All exposed edges to have TW lipping etc; complete with spirit finish.
1
-
-
... More
100A 35KA FP MCCBs – 4nos
-
-
-
... More
Supply, installation, Testing and commissioning of following 11KV/0.433KV, Dyn11 Outdoor ONAN Oil Cooled type Copper double wound Distribution Transformer with OFF circuit Tap changer and Losses as per detailed Technical Specifications & IS 1180 Level-2 standards.
-
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
ORNAMENTAL PLANTS
-
-
-
... More
6 mm cement plaster of mix :
-
-
-
... More
1.3 TR
10
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
1076
-
-
... More
10 x 120 mm
500
-
-
... More
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.l. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
573
-
-
... More
Ordinary Rock
5095
-
-
... More
4-pole 63Amps , 16KA MCB - Spare.
-
-
-
... More
32mm dia
5000
-
-
... More
Chapter XXVI- Arboriculture
-
-
-
... More
Conference table for 14 seater of size 4500 x 1500 /1200 x750mm with plywood frame work covered with 18mm thick plywood, inner surfaces finished with 0.60mm thick lamination and exposed surfaces finished with 3.50mm thick teak veneer in approved design duly PU polished pop-up boxes of approved make, etc complete all as specified.
1
-
-
... More
ON/OFF Push Buttons -1 Set
-
-
-
... More
Supply,erection,testing and commissioning of Cast Iron Sluice Valves with S.S Disc: Wheel operated conforming to IS:14846, PN 16 with flanges for pipe including bolts,nuts and rubber insertions etc., complete and of following sizes:
-
-
-
... More
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
2000
-
-
... More
16. Landing Door : SS Hairline Finish
-
-
-
... More
All kinds of soil
2100
-
-
... More
Holes 1.2 m dia and 1.2 m deep
2000
-
-
... More
63/40A 25KA FP MCCBs – 6nos
-
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Manufacture and supply of Charpoy of size 1960 x 900 x400 mm made out of 32 mm dia MS pipe, top to have ISA frame work and supports at center and both ends to accommodate and fix 12mm thick MR graded ply, synthetic enamel painting to all wood and steel works, rubber bushes for pipe legs etc., including MNF set using MS conduit pipe of 15mm dia etc., complete all as per drawing.
120
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
Note: The Contractor shall submitt shop drawings with design calculations
-
-
-
... More
ACB release shall have individual indiaction LEDs for faults (L,S,I,G). ACB release shall be provided with built-in LCD display for following: Current measurement and display with bar graph, date & time stamping for events, last trip data & last 20 trip data. Release shall have over temp. protection. Release shall be provided with battery back-up to assist user to diagnose in the events of fault. Panel Front side Glass/Acrylic sheet to be provided for clear visibility for each section.
-
-
-
... More
3C X 6 Sq.mm Copper
100
-
-
... More
110 mm Shoe
46
-
-
... More
125A 35KA FP MCCBs – 4nos
-
-
-
... More
Supply, Installation, Testing and Commissioning of Box type HEPA filters of capacity 1000 CFM & size 610 x 610 x 305mm deep with an efficiency 99.97% down to 0.3 micron particles
14
-
-
... More
100 NB
50
-
-
... More
With 12 mm mild steel U beading
210
-
-
... More
SUB HEAD - I : EARTH WORK
-
-
-
... More
150 mm dia pipes
4
-
-
... More
40A,25KA FPMCCB with suitable capacitor duty rating Contactor and 5 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -2nos
-
-
-
... More
4Core 10 sq.mm
210
-
-
... More
Incoming : 800A, 50KA 4Pole 50KA MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
Supply and stacking of plant Thuja compacta of height 45-60 cm., well branched in earthen pots of size 25 cm as per direction of the officer-in-charge.
600
-
-
... More
6Way TPNMCBDB with 40A, 100mA 4Pole RCBO as incomer and 15 nos 6-25A SPMCBs and 3nos 8KA SP SPDs as outgoings. (LDBs)
15
-
-
... More
Providing and fixing Dorma Model no. 3108 or approved equivalent floor stop half dome with 45mm dia with fixing accessories, in satin stainless steel
15
-
-
... More
Laying in trench/pipe/tray
50
-
-
... More
Two or more coats on new work
2000
-
-
... More
Metering For Each Incomer :
-
-
-
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced
-
-
-
... More
17. Electric light/fan : LED / Suitable fan
-
-
-
... More
40A AC1 Contactor with 230V Coil and a Time Switch- 1set
-
-
-
... More
Ø 40 mm
365
-
-
... More
Outgoings :
-
-
-
... More
Chapter VIII : Lightning Protection
-
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
Finishing walls with water proofing cement paint of required shade
-
-
-
... More
Brass or bronze flat bar 6x32x250mm mounted on two DMC Insulators (such as acro type 4649) holes of 8mm dia to accomidate 1/4" connection blots with washers and butterfly nuts all made of brass or copper.
6
-
-
... More
The 32 A outgoing modules shall also include power contactor, O/L relay with single phase preventer, On/Off push buttons, On/Off trip indication lamps, Rotary auto /manual selector switch. All out going feeders will have 96 X 96 mm taut band ammeters with appropriate CT ratio - 4 Nos 4 NO/NC contacts.
-
-
-
... More
Supply, Installation, Testing and Commissioning of CPVC (Chlorinated Poly Vinyl Chloride) pipes condensate drain piping insulated using 9 mm thick nitrile rubber tubes including fitting and supports as per the specifications and approved drawings.
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches- 1 set
-
-
-
... More
VCDs, DIFFUSERs, GRILLs:
-
-
-
... More
50 NB
6
-
-
... More
The paint system would have stable resin & inorganic pigments for paint durability and is lead free for water harvesting. The steel sheet shall have brand marking of coated steel manufacturer (product details, date, mfg name, etc) on back side at regular interval confirming genuineness of the material.. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5 x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
-
-
-
... More
3.5C x 25 Sqmm AYFY
50
-
-
... More
Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer-in-charge.
50
-
-
... More
20 mm nominal bore
5
-
-
... More
Ø 34.9 mm
90
-
-
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
4533
-
-
... More
Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1 set
-
-
-
... More
Ø 9.5 mm
635
-
-
... More
iv) Lawn area : 2000 Sqm
-
-
-
... More
Providing and fixing pressed cement tiles, Eurocon or approved brand and size not less than 400mm square & 30mm thickness and jointed with cement slurry mixed with pigment to match the shade of the tile over a screed of cement mortar 1:4 under layer of 20mm thick including curing and washing the floors etc., complete.
100
-
-
... More
Outgoings :
-
-
-
... More
200 mm wide Aluminium fluted strips 3.15 mm thick
30
-
-
... More
Circular shape 560mm internal dia
4
-
-
... More
Supply of single bed of size 1950x900mm with 450mm for foot board and 700mm for head board made out of 18mm thick plywood with 1mm thick lamination head and foot board on both sides, edges to have 30x12mm teak wood beadings, 30x12mm, 2nd class teak wood side runners of size 120 x30mm with 12mm commercial ply supported by 3 Nos of 30x50mm teak wood battens complete with spirit polish as per drawing and as approved.
30
-
-
... More
Metering For Each Incomer :
-
-
-
... More
CEILING SUSPENDED UNITS:
-
-
-
... More
5. control switch on
-
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
Conducting water yield test without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
5
-
-
... More
Providing Spiral coil earthing with 8 SWG GI wire with 115 turns of 50mm dia including earth work excavation in all kinds of soil, SDR and hard rock, spreading of salt and charcoal, back filling as per IS 3043/87 with latest amendments and shall also include interconnection with pole and earth station etc., complete. as per schematic.
420
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
579000
-
-
... More
1. Engine Start
-
-
-
... More
All works upto plinth level
540
-
-
... More
Supply, Installation, Testing and Commissioning of Hard copper REFRIGERANT PIPING of 16swg various sizes with necessary supports, fittings, interconnecting the liquid and suction lines between the aircooled outdoor units and the indoor units. The piping shall be carried out of Hard drawn copper pipes of type 'K with soldered / brazed socket fittings. Isolating valves shall be provided to isolate each compressor, strainers, sight glass and any other component requiring proper operation and maintenance. Both the suction and liquid lines shall be insulated with 19mm thick closed cell insulation for above 25mm dia , 13mm thick for pipes below 25mm dia . The insulation finished with treated woven glass fiber reinforced covering for inside Piping and including making required holes in the wall and re finishing and water tight of holes after laying holes as per the specifications and approved drawings.
-
-
-
... More
Providing pair of rubber hand gloves suitable for working on 11 KV
6
-
-
... More
TREE PLANTATION
-
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
-
-
-
... More
63A,35KA FP MCCB with TVSS – 1set
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1 set
-
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : :
-
-
-
... More
Supply, Installation, Testing and Commissioning of Hard copper REFRIGERANT PIPING of 16swg various sizes with necessary supports, fittings, interconnecting the liquid and suction lines between the aircooled outdoor units and the indoor units. The piping shall be carried out of Hard drawn copper pipes of type 'K with soldered / brazed socket fittings. Isolating valves shall be provided to isolate each compressor, strainers, sight glass and any other component requiring proper operation and maintenance. Both the suction and liquid lines shall be insulated with 19mm thick closed cell insulation for above 25mm dia , 13mm thick for pipes below 25mm dia . The insulation finished with treated woven glass fiber reinforced covering and covered with 24G AL cladding for exposed Piping and including making required holes in the wall and re finishing and water tight of holes after laying holes as per the specifications and approved drawings.
-
-
-
... More
8Way TPNMCBDB with 63A, 100mA 4Pole RCBO as incomer and 21nos 6-25A SPMCBs and 3nos 8KA SP SPDs as outgoings.
11
-
-
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard
design :
-
-
-
... More
Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - : All work upto plinth level
-
-
-
... More
1 x 63 A MCCB outgoing for calorifiers
-
-
-
... More
75-150-300-600/5A 15VA CT in R Phase for APFCR - 1set
-
-
-
... More
2000A Outdoor
15
-
-
... More
Supply, installation, testing and commissioning of Addressable Monitor modules along with all fixing accessories.
2
-
-
... More
Metering :
-
-
-
... More
80mm dia
14
-
-
... More
0-100A Digital Ammeter with CTs of ratio 100/5A, Class 1 Accuracy and 15VA burden and selector switch -1set
-
-
-
... More
Providing and fixing Dorma Model no. TS 68 EN or approved equivalent rack and pinion door closer size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm. Silver finish as per EN 1154.
20
-
-
... More
Manufacture and supply of Dressing mirror wooden made out of 50mm x 30mm TW frame work with 5mm thick mirror fixed to 6mm thick coml. ply backing, including spirit polish etc., complete.
30
-
-
... More
Ordinary rock
2436
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
4Core 6 sq.mm
2300
-
-
... More
LAN outlet (RJ45)
219
-
-
... More
Supply of Black /green colour writing Board of size 1800 X 1200 mm made out of 0.3mm thick steel sheet for top and 0.25mm back having vitreous enamel coating thickness 0.03mm on both sides having 9mm thick MDF board conforming to IS: 12406 mm as material of back support with anodized extruded aluminium alloy hollow section frame work of designation 63400 conforming to IS : 1285 with frame width 20mm and thickness 1.2mm approved shade & quality etc,. of Alkosign make or equivelant.
7
-
-
... More
Providing and fixing cup board shutters 25 mm thick, with Pre- laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge
b) 25 mm thick
330
-
-
... More
125A,35KA FP MCCB -1 No
-
-
-
... More
Supply and fixing of Three phase 125A 3P+N+E wall mounted switched interlocking sockets and surface mounting with 3P+N+E plug including all fixing accessories. (IP67)
7
-
-
... More
Supply, Installation, Testing of Shoe Rack (size: 1000mm(L) X340 mm (W)X500 mm (H))
1
-
-
... More
1250KVA
1
-
-
... More
Supply, Installation, Testing and Commissioning Thermal Insulation of Supply air ducting with 19mm thick closed cell elastrometric Nitrile rubber with factory laminated aluminium foil of density minimum 43Kg/m3 and fire perfromance to pass Class 1 as per BS 476 Part 7 & class O as per BS 476 part 6 and use recommended adhesives and finished with 0.05mm thick 3" wide aluminium foil faced self adesive tape at all joints as per the specifications and approved drawings.
425
-
-
... More
Supply and fixing of Three phase 63A 3P+N+E wall mounted switched interlocking sockets and surface mounting with 3P+N+E plug including all fixing accessories. (IP44)
8
-
-
... More
125A 35KA FP MCCBs – 2nos
-
-
-
... More
40A AC1 Contactor with 230V Coil and a Time switch-1set
-
-
-
... More
63/40A 25KA FP MCCBs – 2nos
-
-
-
... More
65mm dia
300
-
-
... More
250mm Sweep
135
-
-
... More
18 G
225
-
-
... More
32 mm nominal outer dia Pipes
86
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
High pressure pump, vertical inline SS 304 or higher centrifugal pump of cap: 3.0cu.m/hr @ 100m head, flanged ends, coupled to a motor of 3hp, 3ph, 2800rpm including coupling, -1 Set, make : Grundfoss
-
-
-
... More
80 NB
4
-
-
... More
11. Power Supply : 415V 3 Phase 50 cycles AC
-
-
-
... More
Ø 41.3 mm
30
-
-
... More
With float glass panes of 12 mm thickness
150
-
-
... More
8Way
3
-
-
... More
Incoming : 125A, 35KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
4-pole 40Amps , 16KA MCB - 2 Nos.
-
-
-
... More
110mm dia
306
-
-
... More
TV outlet
22
-
-
... More
Wiring from Pressure switches for auto operation
-
-
-
... More
3.5CX95 SQ.MM - Copper
50
-
-
... More
Chapter V: Shop Electricals
-
-
-
... More
36. Safety gears & over speed governer
-
-
-
... More
- Earth enhancement compound upto a depth of 2.0meters arround the electrode capsule.
-
-
-
... More
- Brick chamber & CI Cover complete.
-
-
-
... More
Providing and Displaying Furcaria Variegated plant hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot as per direction of the officer-in-charge.
10
-
-
... More
Supply of officer Table of size 1350 x 600 x 750 mm made out of 18mm thick commercial plywood with 1mm thick lamination of approved brand and shade for frame / box work and top, exposed internal surfaces finished with 0.60mm thick lamination of approved brand and shade, drawer unit with three drawers on sliding channels, key board slide out tray of approved brand, superior quality brushed steel hardware fittings, locking arrangements, teak wood beading / lamination to all exposed edges,un exposed internal surfaces shall be finished with 2 coats of enamel paint and wood primer including surface preparation etc, complete all as directed.
6
-
-
... More
All works upto plinth level
1260
-
-
... More
a) 2400x600mm
4
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
2968
-
-
... More
160A 35KA FP MCCBs – 2nos
-
-
-
... More
Supply and stacking of the following well developed,healthy,true to variety/type plants having minimum height as below mentioned at site work.
-
-
-
... More
Supply, installation, testing and fixing of telephone KRONE connector in wall with adequate knockouts including chase cutting and making the surface good with all required accessories etc complete.
-
-
-
... More
40 Automatic Rescue Device(ARD), Over Load indication
-
-
-
... More
Supply, Installation, Testing and Commissioning of MS 'C' Class hot water pipe with fittings, flanges, valves,reducers ,sockets for probe meter, support hangers with vibration isolation hanger etc with Supply, Installation, Testing and Commissioning of chilled water pipe insulation with 44mm thick closed cell elastrometric nitrile rubber of density 43 Kg/m3, Thermal conductivity not exceeding 0.035 W/M°K Class 1, fire performance to pass class 1 as per BS 476 part 6& class O as per BS 476 part 7 & use recommended adhesive. the insulation finished with treated woven glass fiber reinforced covering & further finished with 24G Aluminium cladding as per the specifications and approved drawings.
-
-
-
... More
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
-
-
-
... More
3C X 95Sq.mm,11KV (E)
2
-
-
... More
Supply, testing and commissioning of following size 11KV XLPE insulated armoured aluminium conductor under ground cable.The cable shall conform to IS 7098/ Part II.
-
-
-
... More
Supply of following PVC Body with Louvers exhaust fan suitable for single phase, 240V, AC supply complete with motor all accessories etc complete.
-
-
-
... More
xii) Chlorine dosing system (1 No) - Suitable for 35 KLD FAB
-
-
-
... More
11KV 5-Breaker Panel (Indoor type)
1
-
-
... More
xxv) Level switches (1 Lot)
-
-
-
... More
ELECTRICAL WORKS:
-
-
-
... More
Busbars : 250A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
Supply and fixing of blinds of following varities of Vista or approved equivalent brand and approved shade including necessary colour co - ordinated brackets, rawl plugs / fasteners, screws etc., complete all as directed by Engr-in-charge.
500
-
-
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
-
-
-
... More
1 x 63 Amps MCCB outgoing for AHU's star/delta starter
-
-
-
... More
250A 35KA 4Pole MCCB
1
-
-
... More
41. Provision for connectivity of CCTV.
-
-
-
... More
complete with required pretreatment like, suitable post treatment for drinking water supply, complete as required for smooth operation at site etc., all complete as directed by the Engineer-In-Charge
-
-
-
... More
25 X 5mm Hot dip GI strip
650
-
-
... More
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :
-
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
Stairs, (excluding landings) except spiral-staircases
920
-
-
... More
VRF HI-WALL SPLIT UNIT:
-
-
-
... More
AIR DISTRIBUTION SYSTEM
-
-
-
... More
Busbars : 400A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
Chapter XXIII - Security Wall & Gate
-
-
-
... More
160x160x160 mm
26
-
-
... More
upto 120 sq. mm
20
-
-
... More
150mm dia Ductile Iron Class K-9 Pipes
20
-
-
... More
All works above plinth level upto floor V level
36
-
-
... More
Exhaust Fans
-
-
-
... More
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
21
-
-
... More
3C X 240 sq.mm, 11KV, E
16445
-
-
... More
3.5C X 300 Sq.mm
24
-
-
... More
xv) Dual media filter (1 No) - Suitable for 35 KLD FAB
-
-
-
... More
150 mm dia
8
-
-
... More
Supply, Installation, Testing and Commissioning of CENTRALISED Remote Controller advanced I Touch Manager type.
2
-
-
... More
Supply, Installation, Testing and Commissioning of 3 way modulating valves with humidistat with remote sensing element, actuator,with matching flanges , bolt & nuts, etc.suitable for hot water as per the specifications and approved drawings of the following sizes.
-
-
-
... More
250A,35KA FP MCCB -1 No
-
-
-
... More
Providing printed instruction chart both in English, Hindi and local launguage and duly framed with front glasses, for treatment of person suffering from Electric shock.
7
-
-
... More
200KVA
2
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
100
-
-
... More
b) One Aquisense sensor faucet for wash basin with base flange (Jaquar make, Model No.SNR-CHR-51011 / Parryware / Hindware or Equivalent Approved make)
-
-
-
... More
Supply of officer Table of size 1650 x 750 x 750 mm made out of 18mm thick commercial plywood with 1mm thick lamination of approved brand and shade for frame / box work and top, exposed internal surfaces finished with 0.60mm thick lamination of approved brand and shade, drawer unit with three drawers on sliding channels, key board slide out tray of approved brand, superior quality brushed steel hardware fittings, locking arrangements, teak wood beading / lamination to all exposed edges,un exposed internal surfaces shall be finished with 2 coats of enamel paint and wood primer including surface preparation etc, complete all as directed.
6
-
-
... More
6 mm cement plaster of mix
-
-
-
... More
AHU - 12000 CFM / 150 mm TSP / 32 TR .
1
-
-
... More
Supply, Installation, Testing and Commissioning Thermal Insulation of Return air ducting with 13mm thick closed cell elastrometric Nitrile rubber with factory laminated Aluminium foil of density minimum 43Kg/m3 and fire perfromance to pass Class 1 as per BS 476 Part 7 & class O as per BS 476 part 6 and use recommended adhesives and finished with 0.05mm thick 3" wide aluminium foil faced self adesive tape at all joints as per the specifications and approved drawings
450
-
-
... More
Main Panel for AHU, Condenser,Pumps,Calorifiers.
-
-
-
... More
NOTE:
-
-
-
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.
61
-
-
... More
For 455x610 mm size
-
-
-
... More
Supply, Installation, Testing and Commissioning of Cutouts for filters, Light fixtures, powersockets, PA System, Smoke detectors
90
-
-
... More
Supply and installation of short circuit isolator, addressable type for isolating analog devices from short circuit,fault isolating module shall have LED that latchesto indicate a short on the loop.This device shall automatically determining an return to normalcondition of the loop restore the isolated segments
36
-
-
... More
Busbars : 630A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
Metering :
-
-
-
... More
Supply of 600mm deep and 750 mm height Conference Table for 21 persons ( `U` Shaped) made out of 19 mm thick commercial board with 4 mm teak veneer & top to have 40mm thick with 4mm thick teak and italian veneer on top in designer pattern and 19 mm thick commercial board tapered foot rest, vertical member with 19mm thick commercial board. Back with 19mm thick commercial board including 4 mm thick teak veneer all exposed edges to have teak wood beading including PU polishing etc. all complete.
18
-
-
... More
63A,50KA FP MCCB with TVSS – 1set
-
-
-
... More
Providing and Displaying Ficus nuda topiary well developed with fresh & healthy foliage 45 to 60cm spread 75 to 90 cm ht. bushy plant in 35 cm Cement Pot as per direction of the officer-in-charge.
90
-
-
... More
2. battery charger on
-
-
-
... More
1:6 (1 cement: 6 fine sand)
12360
-
-
... More
75mm dia
534
-
-
... More
Supply, Installation, Testing and Commissioning of factory fabricated Box type GSS Ducting ( with minimum 120 Gms /Sqm zinc coating) as per SMACNA/DW standards with splitters, bends, elbows, vanes, suitable supports, minimum 6mm thick neoprene gasket, duct sealant (to be applied in all corners & joints), nuts, bolts, angle iron flanges (if required), GI full threaded rods hung to minimum 12 mm dia HILTI make anchor fastner as required and Pre painted slotted rail supports, etc. as per the specifications and approved drawings.
-
-
-
... More
21. Special features/other features : Automatic Rescue Device.
-
-
-
... More
Above 120 sq. mm and upto 400 sq. mm
14800
-
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
85
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kVgrade of following size in the existing masonry open duct as required.
-
-
-
... More
Ø 34.9 mm
105
-
-
... More
Busbars : 250A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
100 dia
3
-
-
... More
Providing and fixing Dorma Model no. TS 68 EN or approved equivalent rack and pinion door closer size 2/3/4, with std. arm and with two independent closing valves and latching speed adjustable by arm. Silver finish as per EN 1154.
10
-
-
... More
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
-
-
-
... More
25 NB
50
-
-
... More
100A, 35KA TP MCCB with suitable capacitor duty rating Contactor and 25 KVAR MPP 440V Delta connected heavy duty Capacitor Banks - 3nos
-
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
-
-
-
... More
Busbars : 630A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
34. Load weighing device with indicator & bypass function.
-
-
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge.
-
-
-
... More
Techical complex-Wing Main panel-2
-
-
-
... More
Supply Installation Testing and commissioning of 2x400watts High intensity long range swiveling type motorized security search light in stainless steel reflector cum body complete with 400W Metalhalide lamp, control gear and remote control unit with suitable control cables. The motor will be of 3 Phase 415V type for efective rotation of security lights. The fitting would be suitable for installing on the roof of the watch tower cabin.
13
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
125A 25KA FP MCCB – 4nos
-
-
-
... More
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
490
-
-
... More
28. Pit ladder and ballustrade
-
-
-
... More
65NB (GM Gate Valve)
4
-
-
... More
100A 35KA FP MCCBs – 4nos
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth upto 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m:
-
-
-
... More
3. over load relay
-
-
-
... More
AMF Panel for Diesel Engine pump :
-
-
-
... More
Above 120 sq. mm and upto 400 sq. mm
822.95
-
-
... More
HT Cables
-
-
-
... More
Providing and fixing to existing door frames.
-
-
-
... More
8Stage Automatic PF Controller Relay (Microprocessor based) with PF Meter - 1set Each Capacitor Bank shall have the following : ON/OFF Indication lamps Analog Ammeter with CTs and selector switch Auto/ Manual Selector switch with 1set of ON/OFF Push buttons for Manual Operation. All contactors shall be heavy duty type.The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
25 mm
4570
-
-
... More
Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets :
-
-
-
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
10430
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete..
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches - 1set
-
-
-
... More
3.5C X 35 Sq.mm
16
-
-
... More
Profile B
988
-
-
... More
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately).
-
-
-
... More
63A,35KA FP MCCB with TVSS – 1set
-
-
-
... More
19C X 2.5 Sq.mm Copper
6
-
-
... More
3.5C X 70 SQ.MM- Copper
2
-
-
... More
Door size up to 2.5 m x 3.0 m
3050
-
-
... More
Anti termite treatment of ground cover area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or ground cover area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge.
100
-
-
... More
Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
12200
-
-
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
800A VCBs with Voltmeter with PT, Ammeter with CTs, PF Meter, Trivector metere, Numerical type Overload & Earth Fault relays, Phase Indication Lamps, Breaker On/Off/ Trip and Spring Charge, and Trip Circuit healthy e.t.c., as per detailed Technical Specifications – 1no.
-
-
-
... More
upto 120 sq. mm
30
-
-
... More
125A 35KA FP MCCB – 3nos
-
-
-
... More
Chapter XX - Sewerage Works
-
-
-
... More
3Breaker panel (Indoor type)
2
-
-
... More
Supplying and fixing cable route marker with 10 cm X 10 em X 5 mm thick G.l. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
327
-
-
... More
2 X 4 sq. mm +1 X 4 sq. mm earth wire
450
-
-
... More
Supply and fixing of Fire Hose Box of MS of size 3 'x 2' x 1' 6” to accommodate two numbers of 30 M/15M length hoses and branch pipe, glass fronted, double door with lock painted fire red outside with suitable structural support complete but excluding civil works.
6
-
-
... More
UV system, 253.9nm, type lamp inside quartz jacket, Housing matl. EP SS304, dosage 30000microWS/Sq.cm, with accessories - 1 Set, Make : Shunyoue / Sukrut
-
-
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
200
-
-
... More
Main PCC @ MRS substation
1
-
-
... More
OUTGOING: 4-pole 63Amps,16KA MCB - 1 Nos.
-
-
-
... More
Metering For Each Incomer :
-
-
-
... More
1 Set of DOL Starters suitable for 2850 LPM, 70 Mtrs head Pump Motor consisting of the following:
-
-
-
... More
Incomer: 0-400A Ammeter with resin cast CTs of ratio 400/5A, class 1 accuracy and 15VA burden and selector switch -1 set
-
-
-
... More
125A 35KA FP MCCBs – 1no
-
-
-
... More
Design,Supply installation testing and commissioning of 100 LIT capacity galvanised steel shell with removable electric water element of min 15KW, designed for inlet temp of 60deg C and 70 deg C water out let with nessary fittings , valves, mounting brakets as per specification.
1
-
-
... More
8 SWG GI wire
2040
-
-
... More
Supply, Installation, Testing & Commissioning of the following Light Fixture with lamp, Control Gear & All necessary accessories. Luminaries with all electrical accessories & it should be energy efficient, etc are prewired up to the terminal block & mounted on a removable control gear module for ease of maintenance. All electrical connections of the control gear module with the rest of the luminaries should be click fix & require use of no tools. Mounting options should be for both lateral as well as pole top mounting with Lamp Control Gear & Fixing Accessories. All fixtures shall be white colour & supplied with white lamps. All the light fixtures will be finally approved by Architect / Consultant/ Department. Architect / Consultant / Department reserves the right to reject the fittings suggested by the contractor.
-
-
-
... More
Size of Tile 600x600 mm
2740
-
-
... More
Assembling,Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
300
-
-
... More
Providing and Displaying plants Chrysenthemum single variety in different colour well developed having 45 to 60 cm ht., minimum 100 and above half bloom flowers open well stacked with bamboo stick having three layer tiding by thread fresh and healthy foliage in winter season in 25 cm Earthen Pot and as per direction of the officer-in-charge
150
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. ( AS per IS 1200 No extra Amount shall be paid for excavation is done beyond 1.5 m depth if the excavation is done by mechanical means ) .
-
-
-
... More
Busbars : 160A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
Supply and erection of steel stepped and swaged tubler poles of 9mtr. Long (410 SP25) (1.5mtr below Ground) with base plate, earthing studs,1.5Mtr out reach single arm, FRP terminal box, 2nos 50mm diaclass B GI Pipe for incoming and outgoings cables as per drawing, including PCC Pedestal complete with painting with black bitumin paint inside the coping for embedded portion and two coats of Zinc chromate primer and two coats of Aluminium paint externally for length above the ground. The pole shall be with Junction box consisting of MCB. The wiring from Junction box to Light fixture shall be carried out with 3core 2.5sq.mm multistrand conductor cable. The Pole shall be fixed with 72W LED Lamp with fixture including supply of street light fixture. (Bajaj/Philips/Crompton/Wipro similar to Bajaj : BRTFG 72W LED V3)
155
-
-
... More
3.5C X 35 Sq.mm
2020
-
-
... More
MV Cables
-
-
-
... More
29. Flooring : Provision for Granite flooring with 19mm recess.
-
-
-
... More
Outgoings :
-
-
-
... More
100 mm diameter S.W. pipe
710
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
c) One 15mm heavy quality flexible PVC inlet pipe connection with C.P.brass hexagonal check nuts with washers at both ends.
-
-
-
... More
20A, DP MCBs - 3sets
-
-
-
... More
Subhead - VIII : Steel Work
-
-
-
... More
Providing Indoor End terminations for the cable specified under item above with compression type steel gland, lugs using crimping tool, Insulation tape, Identification tags etc. including end termination.
-
-
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
... More
Ø 19.1 mm
170
-
-
... More
iv) Motors for FAB feed pumps (2 Nos- 1 W+ 1 S)- Suitable for 35 KLD FAB
-
-
-
... More
Supply of High back Executive Chair with seat/back shall be made up of 1.2 ±0.1cm thick hot pressed plywood measured as per QA method desaribed in OCP-QLTA-P14-18 and upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of back shall be-50.0 cm (W) x 72.0 cm (H) and of seat shall be-50.0 cm (W) x 46.5cm. (D). The HR Polyurethane foamshall be moulded with density 45±2kg/m3-and Hardness load 16 ±2 kgf as.per IS:.7888-for 25% compression. The seat cover shall be injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets. The one-piece armrests shall be made of black integral skin polyurethane with 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The armrests shall be scratch and weather resistant.
9
-
-
... More
Pipes, cables etc. not exceeding 80 mm dia.
150
-
-
... More
Providing and fixing color coated Galvalume profile sheets of LYSAGHT of Tata Blue scope or approved equivalent make (size,shape and pitch of corrugation as approved by Engineer-in-charge) Minimum of (0.45 BMT ) 0.50 total coated thickness, High tensile with min 550 Mpa Yield strength, metallic hot dip coated with Al-Zn alloy (55% Aluminum, 43.5% Zinc, 1.5% Si ) as per AS 1397 / IS15961 - Zincalume AZ150 (min. 150 gms/sq.mt total on both sides). with Super Durable Polyester COLORBOND® XRW quality paint system of approved color, suitable for exterior application conforming to AS/NZS 2728 type-4 / IS15965 class 3. The sheet shall have a total coating thickness of 35 microns, super durable polyester COLORBOND® XRW with Thermatch™ solar reflectance technology quality paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces. The paint system would have stable resin & inorganic pigments for paint durability and is lead free for water harvesting.
-
-
-
... More
4C X 10 Sq.mm
250
-
-
... More
Resin cast CTs of ratio 50-125-250/5A, Class 1 Accuracy and 15VA burden on R phase for APFCR -1no
-
-
-
... More
Providing and fixing panelling for the door, 120mm x 50mm on and around block/brick wall with 12mm thick commercial waterproof ply, termite treated and painted with bitumen on back side, to be directly fixed on to the wall with dash fasteners and faced with 1mm thick laminate of approved shade pasted on top of ply , including all incidentals etc complete.
50
-
-
... More
All kinds of soil
27600
-
-
... More
4. DC supply on
-
-
-
... More
40A AC1 Contactor with 230V Coil and a Time switch-1set
-
-
-
... More
Supply, erection, testing and commissioning of Brass/ GM/ Bronze Air release valves screwed end type and rubber insertions etc., complete and of following size:
-
-
-
... More
1. Primary bowl - Threal Candle 5 micron - to remove physical impurities
-
-
-
... More
Supply and laying of following size strips including excavation in any type of soil including SDR & hard rock and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and equipments.
-
-
-
... More
Providing G.I. Earth station, with 40mm dia. 2.5mtr long Class B GI pipe including construction of brick pedestal, providing meshed funnel, CI cover and other civil Engineering works, spreading a homogenous mixture of salt, charcoal around the pipe etc, completely as per IS 3043, 1987 or latest revision.
36
-
-
... More
13. Control: Selective collective control with simplex.
-
-
-
... More
Supply and laying of following size strips including excavation and refilling of each when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and equipment's.
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUMEI METAL pipe as required.
-
-
-
... More
Providing maintenance free Earth station with consisting of
6
-
-
... More
250A 35KA FP MCCBs - 1nos
-
-
-
... More
25 X 5mm GI strip
-
-
-
... More
3.5C X 70 Sq.mm
2
-
-
... More
350W LED flood light fixture including supply of Controlgear/driver and lamp and other fixing accessories. (Bajaj : BJFL 350W LED )
20
-
-
... More
Supply, Installation, Testing of Lockers for personal belongings (20 cubicles)
1
-
-
... More
2.6 TR
7
-
-
... More
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
MOTOR CONTROL CENTRES:
-
-
-
... More
63/40A 25KA FP MCCBs – 3nos
-
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
69
-
-
... More
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
-
-
-
... More
50 X 5mm GI strip
-
-
-
... More
Ø 41.3 mm
35
-
-
... More
- 65mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, seald at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs.
-
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
10200
-
-
... More
Supply, installation, testing & Commissioning of Three phase 63A 3P+N+E wall mounted switched interlocking sockets and surface mounting with 3P+N+E plug including all fixing accessories. (IP67) with enclosure. The enclosure shall have provision for entry for incoming & Cables for outgoing and including MS angle (50x6mm) iron frame up to a height 1Mtr including foundation)
3
-
-
... More
Maintenance of potted plants Cement pots at ground floor in flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required (Materials shall be provided by the department) as per direction of officer in charge
200
-
-
... More
4core 2.5sq.mm
360
-
-
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.
-
-
-
... More
Supply, Installation, Testing and Commissioning of 2 no of 6/16A single phase socket with 2 no of 16A single SP switch with SS cover plate compatible for clean room.
30
-
-
... More
Incoming : 800A VCBs with Voltmeter with PT, Ammeter with CTs, PF Meter, Load manager with RS 485 (PM 8000), Numerical type Overload & Earth Fault relays, Phase Indication Lamps, Breaker On/Off/ Trip and Spring Charge, and Trip Circuit healthy Indications – 2nos
-
-
-
... More
Hard rock (requiring blasting)
5560
-
-
... More
63A, 25KA FP MCCB - 1set
-
-
-
... More
Providing and laying Double Charged Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Make JOHNSON ( Croma flurry/ Rosso Verona or Equivalent ) KAJARIA (K-6208/6201 or Equivalent ).
SOMANY ( Nuvaro Mocha/Decia grey walia or Equivalent ).
-
-
-
... More
Incoming : 400A, 35KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
3.5C X 185 Sq.mm
1600
-
-
... More
Supply and stacking of Azadirachta indica ( Neem ) plant of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
500
-
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
6400
-
-
... More
Supply and fixing of Single phase 20A 2P+E wall mounted switched interlocking sockets and surface mounting with 2P+E plug including all fixing accessories. (IP44)
3
-
-
... More
Excavating, supplying and filling of local earth (including royalty) outside MOD Land by mechanical transport, also including ramming and watering of the earth in layers not exceeding 20cm in trenching, plinth, sides of foundation etc. complete.
6545
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
610
-
-
... More
40/63A 16KA FP MCCB – 3nos
-
-
-
... More
New work (three or more coats)
8540
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
-
-
-
... More
The PCC shall have at least two spare cubicles. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels including supply and fixing of the same. Every ACB shall be provided with ON/OFF /Trip Indication lamps of LED type. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely. All ACBs shall be provided with Digital type Ammeter of suitable range along with CTs. All ACBs shall be provided with ON/OFF/TRIP indication lamps and shunt trip coils. All MCCB/ACBs of rating 160A and bove shall be with Micro processor releases All MCCBs below 160A shall be with adjuctable thermal magnetic based releases. All MCCBs shall be with spreader links and rotary handle. All breakers shall be over load & short circuit releases with Icu=100% Ics. All CTs/CBCT shall be resin cast type. All Control wiring shall be FRLS cables, all the bus bar sleevs shall be Heat shrinkable kits. The Panel shade shall be RED color.
-
-
-
... More
150 mm dia sand cast iron drop connection
3
-
-
... More
1.6 TR
13
-
-
... More
Supply of Visitor chair with arms, without castors, cushion at seat and back duly upholsted. The polyurethane foam is moulded density 45±2 kg/m³ and hardsness 20±2 at 25% compression with PU arm rest injection moulded from black co polymer polypropylene. The powder coated tublar frame is cantiliver type and made out of 25.4mm x 2mm thick MS ERW tube etc., complete all as per Model no: PREMIER -FU7112R of Godrej Make or eqivalents of Wipro/Featherlite/Durian/Ikea.
15
-
-
... More
e) One 32mm heavy quality CP brass waste coupling with rubber plug and CP chain (JAQUAR-ALD-709 / Parryware / Hindware or approved equivalent make)
-
-
-
... More
- 40mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, seald at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs.
-
-
-
... More
0-160A Digital Ammeter with CTs of ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1set
-
-
-
... More
20A 10KA TPN MCBs -3Nos
-
-
-
... More
Subhead - X : Roofing
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
300mm x 54mm, The Load bearing capacity of the Cable Trays should be minimum of 57.66KG/meter at the span of 1.5Meter
75
-
-
... More
Supply, Installation, Testing and Commissioning of Fire retardant canvass connections with MS Eoxy painted / Al powdercoated finish angle flanges on both sides as per the specifications and approved drawings.
2
-
-
... More
DUCTILE IRON PIPIE, CLASS -K-9
-
-
-
... More
Above 185 sq. mm and upto 400 sq. mm
4010
-
-
... More
63A,35KA FP MCCB with TVSS – 1set
-
-
-
... More
Busbars : 1000A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
Metering For Each Incomer :
-
-
-
... More
8SWG GI wire
150
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.
13270
-
-
... More
25mm dia
4
-
-
... More
- Brick chamber & CI Cover complete.
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
On one side only
30
-
-
... More
Supply and fixing in position of neoprene Rubber push-on-joints for the Di pipes of following sizes.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
17000
-
-
... More
26. Emergency Stop Button
-
-
-
... More
11KV HT Panel at Metering Point :
-
-
-
... More
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
240
-
-
... More
G.I. PIPES
-
-
-
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
600
-
-
... More
0-630A Digital Ammeter with resin cast CTs of ratio 600-300/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
1 x 32 A MCCB outgoing for Air shower
-
-
-
... More
Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
-
-
-
... More
Supply of four shelves Book case of Size 1742H x 914 W x 320D with multi bend constuction with press fit fastner free design, top hung doors with equilizing scissor mechanism for easy opening and closing, 10 lever cam lock, 330mm clear space between shelves, anti corrosion treated components and oven baked powder coating processed fish to all steel surfaces, top, bottom, LH & RH sides and back of thickness 0.8 mm , top hung sliding glass doors(4 nos) with 3 mm glass with equalizing mechanism for easy operation, 4 nos shelves with stiffeners etc., complete all as per manufacturer's specifications of ST4BC model of Godrej make or equivalents of Wipro/Featherlite/Durian/Ikea.
8
-
-
... More
Incoming : 250A, 35KA 4Pole MCCB -1set
-
-
-
... More
63A 10KA FP MCBs – 8nos
-
-
-
... More
Outgoings :
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches- 1 set.
-
-
-
... More
27. CVT/Built Voltage Stablizer (Constant Voltage Transformer)
-
-
-
... More
3C x 2.5 sq.mm. (Copper) (form indoor/Outdoor to power socket)
825
-
-
... More
Supply of Luggage rack in two tier of size 1000x 600 x 500mm made out of 45 x 45mm frame work on top, sides with 75 x 25 mm TW section with 30 x 15 mm TW planks on top and bottom etc., with Melamine polish.
14
-
-
... More
48 HP OUT DOOR UNIT (16+16+16)
1
-
-
... More
80 NB
100
-
-
... More
8Stage Automatic PF Controller Relay (Microprocessor based) with PF Meter - 1set Each Capacitor Bank shall have the following : ON/OFF Indication lamps Analog Ammeter with CTs and selector switch Auto/ Manual Selector switch with 1set of ON/OFF Push buttons for Manual Operation. All contactors shall be heavy duty type.The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
Supply fabrication and erection of following 415V 2000A TPN non phase seggregated Bus duct made out of 2.5mm thick MS sheet with painting after Seven tank process and consisting of 2000A TPN Aluminium Busbars (@0.8A/sq.mm) including flexible braided connections at the ends to facilitate connections and running 2runs of 50X6mm hot dip galvanised GI strip along the Bus duct complete as required. The Busduct shall be got manufactured only from Panel Builders with CPRI Test certificate.
-
-
-
... More
Supply and laying of 3 core 2.5sq.mm Copper conductor XLPE insulated armoured cable in built up cable trench/ already laid RCC hume pipe or on cable tray with all installation materials for provison of power supply to Fire Alarm Panel, Repeater Panel, Siren, Exit signage's, Signalling modules etc complete.
100
-
-
... More
Supply & laying in existing trench / hume pipe
360
-
-
... More
630A 50KA FP MCCBs - 2nos
-
-
-
... More
Supply and laying of RG 11 Cable in existing conduit
315
-
-
... More
Supply, erection, testing and commissioning of 3 Cu.m/hr at 70 m head submersible pump set 3Phase-415V, 50 Hz, 2 HP/ 12 stages, 2900 rpm as approved by Engineer in charge at site.
3
-
-
... More
500mm x 54mm, The Load bearing capacity of the Cable Trays should be minimum of 107.78KG/meter at the span of 1.5Meter
300
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
200mm clamp
3
-
-
... More
Busbars : 400A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
25. Integral shaft for gear and motor
-
-
-
... More
Ø 50 mm
1
-
-
... More
Ø 28.6 mm
165
-
-
... More
Incoming: 400A, 50KA FP MCCB - 1 No
-
-
-
... More
1:4:8 (1 Cement : 4 coarse sand(zone III) : 8 graded stone aggregate 40 mm nominal size)
2145
-
-
... More
150 mm dia Ductile Iron Double Flanged
20
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed I XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
... More
Ø 15.9 mm
610
-
-
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.
29880
-
-
... More
Providing and Fixing Polyvinyl Chloride (PVC) pipes having thermal stability for hot and cold water supply including all PVC plain and brass threaded fittings.This includes jointing of pipes and fitting with one step PVC solvent cement,trenching,refilling and testing of joints complete as per directions of Engineer -in- charge.
-
-
-
... More
Supply and installation of following size TV Splitter in MS box complete as required.
-
-
-
... More
Bus bars: 400 A TP with 100%Aluminium bus bars - 1 Set
-
-
-
... More
ix) Tube settler media (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
Upto 35 sq. mm
1000
-
-
... More
Provision for Future expanstion for bus coupler cubicles & outgoings VCBS cibicles
-
-
-
... More
20A 10KA TPN MCBs -3Nos
-
-
-
... More
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
24. Manual Cranking operation
-
-
-
... More
Supply, installation, test & commission of outdoor type Servo Voltage Stabilizer of following capacities of suitable for Unbalanced Load. The input power shall be at 320 to 480 Volts, 3 Ph., 50 Hz. The Out-put voltage shall be 415 V. 3 Phase, 4 Wire, 50 Hz. - Regulation : +/- 1 %. Speed of correction : 20 V/ sec or better. Over load & Short circuit protection with 0/L alarm
Protection cut-off against Over/Under Voltage.
Single phase protection - Ammeter & Voltmeter with their Selector Switches. 3 nos. phase indication lamps. Auto I manual selector switch. Cable End terminal Box at both ends of suitable size. - Servo-stabilizer shall be oilcooled.
-
-
-
... More
4Core 10 sq.mm
4410
-
-
... More
0-100A Digital Ammeter with CTs of ratio 100/5A, Class 1 Accuracy and 15VA burden and selector switch -1 set
-
-
-
... More
50NB (GM Gate Valve)
4
-
-
... More
40A,25KA TPMCCB with suitable capacitor duty rating Contactor and 5 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -1no
-
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
1548
-
-
... More
900mm dia RCC pipe
100
-
-
... More
- Ground enhanced material (GEM) upto a depth of 2.5meters arround the electrode capsule.
-
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
... More
100 x 100mm size P type
-
-
-
... More
Incoming : 800A VCBs with Voltmeter with Line PT & Bus PT, Ammeter with CTs, Load Manager with RS 485 (PM 8000) with Modubus connectivity, PF Meter, Numerical type Overload & Earth Fault, directional relays, Phase Indication Lamps, Breaker On/Off/ Trip and Spring Charge, and Trip Circuit healthy Indications - 2nos
-
-
-
... More
Outgoing : 11KV, 400A, 350MVA, Air break HTSFU with HRC fuses and earth switch. (As Transformer Controlling Breaker) - 1set.
-
-
-
... More
3.5C X 120 Sq.mm
2410
-
-
... More
150 mm x 150 mm x 150 mm dia
8
-
-
... More
15 NB
4
-
-
... More
Foundations, footings, bases of columns, etc., for mass concrete
8355
-
-
... More
25 mm nominal bore
10
-
-
... More
10. Auto manual selector switch
-
-
-
... More
Supply,installation,testing and commissioning of storage water cooler with storage capacity of 80 liters and cooling capacity of 40 liters water outlet suitablle for operation on 230 v + 10% 50HZ, etc, complete. Make : Voltas/Blue Star/Usha Water Purifier : Eureka Forbes/Kent/ION exchage Stabilizer : Keeline/V-guard
13
-
-
... More
Suspended floors, roofs, landings, balconies and access platform
12917
-
-
... More
The backrest shall consist of a fixed type mechanism i.e no back up/down adjustment. The leg frame welded assembly shall be chrome plated, made from 3.5+/-0.03cm x 1.5+/-0.02cm x 0.16+/-0.0128cm thick ellipitical MSERW tube and provided with a base plate for seat fixing. Overall dimensions of Chair shall be, Width of Chair - 66.5cm, Depth of Chair - 58.0cm as measured from pedestal below. Height from ground - 88.5cm. Seat height - 45.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. complete all as per Make Godrej model KAREENA or Equivalent specifications of Wipro/Featherlite/Durian/ HOF/ERGO.
-
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :
-
-
-
... More
Each Capacitor Bank shall have the following : ON/OFF Indication lamps Analog Ammeter with CTs and selector switch . The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
With float glass panes of 5.5 mm thickness
735
-
-
... More
100A 25KA FP MCCBs – 1no
-
-
-
... More
25 x 5 mm hot dip galvanized iron strip
-
-
-
... More
Incoming : 630A, 50KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
20A 10KA TPN MCBs -3nos
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
40A AC1 Contactor with 230V Coil and a Time switch-1set
-
-
-
... More
Supplying and fixing of following sizes of heavy class FRLS PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
39. Civil works: All minor civil works such as scaffolding, making holes, grouting, concreting etc.
-
-
-
... More
Supply, Installation, Testing and Commissioning of POWER CABLING of Copper cable for indoor / outdoor units to be suitably laid in PVC conduit as per site requirement.
-
-
-
... More
Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive.
80
-
-
... More
CLEAN ROOM
-
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
325
-
-
... More
xvi) Activated carbon filter (1 no) - Suitable for 35 KLD FAB
-
-
-
... More
Supply, Installation, Testing and Commissioning of balancing valves with matching flanges , bolt & nuts, insulation etc ,suitable for hot water,as per the specifications and approved drawings.
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black nylon etc; complete all as per Make Godrej model Leoma or Equivalent specifications of Wipro/Featherlite/Durian/ HOF/ERGO.
-
-
-
... More
NON-RETURN VALVES
-
-
-
... More
Filter Skid : 40x1.2 square tubular structure with level screws - 1 No.
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
820
-
-
... More
GATE VALVES
-
-
-
... More
DUCTILE IRON PIPIE, CLASS -K-9
-
-
-
... More
OUTGOING: 4-pole 40Amps,16KA MCB - 3 Nos.
-
-
-
... More
Supply, Installation, Testing and Commissioning of following size 1.1 KV Grade Aluminum / Copper conductor XLPE insulated PVC sheathed armoured cable and shall be laid on cable tray (indoor / outdoor) with all installation materials. the cable shall conform to IS 7098 / part-I
-
-
-
... More
20A 10KA TPN MCBs -3Nos
-
-
-
... More
26. Emergency Stop Button
-
-
-
... More
Ø 15.9 mm
490
-
-
... More
100A, 35KA TPMCCB with suitable capacitor duty rating Contactor and 25 KVAR MPP 440V Delta connected heavy duty Capacitor Banks - 2nos
-
-
-
... More
9. Car Size : 2200mm High x 2000 mm Deep x 1000 mm wide
-
-
-
... More
19core 2.5sq.mm
1200
-
-
... More
150 mm dia
2
-
-
... More
40 mm dia nominal bore
143
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand)
21850
-
-
... More
SHRUB PLANTATION (SOLO)
-
-
-
... More
Providing wall mounted TV stand/ panelling with second class teak wood frame work covered with 12mm thick plywood finished with 1mm thick lamination of approved shade in approved design/pattern, shelves etc complete all as directed by engineer-in-charge.
8
-
-
... More
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
100
-
-
... More
Supply of bunk beds two tier with hard top with 16mm plywood and MNF set 1975 x 972 x 1635 mm with provision of ladder to climb on to upper bed made out of 50 x 25 mm rectangular pipe and 40 x 40mm square pipe frame, of 16 guage with powder coated finish etc., complete
8
-
-
... More
Supply Installation Testing and commissioning of TPN MCB Double door Distribution boards dust and vermin protected and rated for 415V Three Phase AC supply operation including incoming MCB /ELCB as per specifications and required capacity Neutral bar and Earth terminal complete as required and installed in flush with wall including all fixing materials required. MCBs shall conform to IS : 8828 and ELCB shall conform to IS :12640. All MCBs shall be 'C' Curve.
-
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.
-
-
-
... More
Manufacture and supply of dining chairs without arms of size 450 x 475 x 960mm made out of 50 x 32mm size teak wood in approved pattern for legs, teak wood structure / frame work, seat with 12mm thick commercial ply wood & 50mm foam and back with 6mm thick commercial ply wood & 25mm foam uphostered with fabric of approved quality, brand and shade, teak wood surfaces finished with spirit polish and internal / un exposed surfaces finished with a coat of wood primer etc., complete all as per drawings and as directed.
30
-
-
... More
Supply, Erection, testing and commissioning of Cast Iron Butterfly valves (Wafer type) (PN-10) above nd upto 50mm dia with necessary flanges, bolts, nuts etc., and gun metal gate valves from 40mm dia and below
-
-
-
... More
Pipes, cables etc, exceeding 80mm dia but not exceeding 300mm dia
50
-
-
... More
SUB HEAD - III : REINFORCED CEMENT CONCRETE :
-
-
-
... More
Supply of Crockery cabinet of size 1800 x 450 x 750 mm made out of 18 mm thick plywood with 3.5 mm thick veneer for sides, 1 mm laminate for top and also to have 18 mm thick granite of approved shade with moulded edges for front and sides, 2 drawers to run on powder coated sliding channels and 4 shutters, 6mm thick glass shelves including necessary hardware fittings like hinges, ball catches, handles etc., all complete with melamine polish as per drawing.
2
-
-
... More
18. Car enterance : Center opening power doors with SS No. 4
-
-
-
... More
v) Flower beds : 100 Sqm
-
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)
-
-
-
... More
36W LED surface mounted fixture (Bajaj/Philips/Crompton/Wipro similar Bajaj: BZSSLL 36W LED WH)
218
-
-
... More
25. Integral shaft for gear and motor
-
-
-
... More
Supply, erection, testing and commissioning of Jockey pump of 180 LPM with a speed of 2900 RPM against a total head of 70 mtrs, complete with TEFC Squirrel Cage motor with class- F insulation suitable for the pump, base plate, coupling, coupling guard foundation bolts and nuts etc., complete.
1
-
-
... More
Busbars : 160A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
80mm dia
2
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1 set
-
-
-
... More
- Brick chamber & CI Cover complete.
-
-
-
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
100
-
-
... More
20G
130
-
-
... More
100pair
1
-
-
... More
Double Socketed Tee with Flanged Branch
-
-
-
... More
VALVES
-
-
-
... More
FPB-18 (Weather proof double door outdoor type)
1
-
-
... More
0.91 m deep with SFRC cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete.
(Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :
-
-
-
... More
Pipes, cables etc. not exceeding 80 mm dia. in Ordinary Rock
30
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.
2000
-
-
... More
Supply, installation, testing & Commissioning of wall mounted/floor mounted type RO water treatment plant conprising following stages
-
-
-
... More
Voltmeter, Ammeters, Indication lamps shall be provided as required.
-
-
-
... More
Busbars : 160A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
Flanged Spigot
-
-
-
... More
32. Controls: Resolve Micro Processor based simplex full collective control with or without attendant operation.
-
-
-
... More
- 65mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, seald at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs.
-
-
-
... More
Busbars : 63A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
15. Car door : SS hair line finish.
-
-
-
... More
Providing and fixing of cupboard of 600mm deep with 4 Nos. openable shutters, two vertical dividers and two shelves made out of 18mm ply wood with 1mm laminate board, all exposed edges to have teak wood lipping with spirit polish etc; all complete as per directions of engineer-in-charge.(Openable shutters and Hardware shall include brass tower bots, 100mm long 'C' type brass/powder coated handles, auto closing hinges, ball catchers and locks will be paid separately.)
30
-
-
... More
0-160A Digital Ammeter with CTs of ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1 set.
-
-
-
... More
out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of
the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
3.5C X 95 Sq.mm
14
-
-
... More
Manufacture and supply of Corner Table of size 450 x 450 x 400 mm made out of 50 x 50 mm teakwood legs with necessary frame work, top to have 18mm thick MR graded plywood cladded with 1mm thick laminate on top etc., complete with spirit polish and all as per drawing
10
-
-
... More
- Ground enhanced material (GEM) upto a depth of 2.5meters arround the electrode capsule.
-
-
-
... More
Supply of Steel Storage rack of size 2000 x 900 x 450 mm made out of MS "C" Angle of 2mm thick with five panels of M.S. sheet of 14 guage with spray enamel paint complete all as per make of Godrej or equivalent Etc; complete. .
18
-
-
... More
0-630A Digital Ammeter with resin cast CTs of ratio 600-300/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
160A 35KA FP MCCB – 2nos
-
-
-
... More
Supply of four seater Cafeteria table of size 1200 x 1200 x 750mm, with PU coated top and MS powder coated understructure. Model : Time out four seater of Godrej or equivalents of Wipro/Featherlite/Durian/Ikea
4
-
-
... More
Contactor and wiring of suitable rating for
-
-
-
... More
Providing Double compression end terminations for the cable specified above with compression type gland, lugs using crimping tool, Insulation tape, Identification tags etc.,including end termination and Earthing of Gland.
-
-
-
... More
Providing of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot.
100
-
-
... More
150 NB
5
-
-
... More
11KV Main PCC
-
-
-
... More
Outgoings : 800A VCBs with Ammeter with CTs, Load manager with RS 485 (PM 8000), Numerical type Overload & Earth Fault, directional relays, Phase Indication Lamps, Breaker On/Off/ Trip and Spring Charge, and Trip Circuit healthy Indications - 2nos.
-
-
-
... More
Supply, erection, testing and commissioning of pressure Gauges with range of 0-15 bar along with isolation cock and pipe at hydrant station for fire fighting pumping system.
4
-
-
... More
b) 1950x1500x300mm
2
-
-
... More
All Socketed Tee
-
-
-
... More
200 mm diameter S.W. pipe
100
-
-
... More
63/40A 25KA FP MCCB – 3nos
-
-
-
... More
12. Auxilary power : Single phase 220 V 50 cycles A.C.
-
-
-
... More
The seat cover shall be injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets. The one-piece armrests shall be made of black integral skin polyurethane with 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The armrests shall be scratch and weather resistant. The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ±0.05-cm. thick HR steel.The tubular frame shall be cantilever type & made of 0 2.54±0.03cm x 0.2 ±0.016cm.thk M.S. E.R.W tube and black powder coated (DFT 40-60 microns). Overall Dimensions of Chair shall be Seat Height -45.0cm.Height -81.5cm, Width & Depth of Chair as measured from pedestal - Width-59.0 cm and Depth-63.0 cm.Etc; complete all as per Make Godrej model REGENCY 7003D or Equivalent specifications of Wipro/Featherlite/Durian/ HOF/ERGO.
-
-
-
... More
Supply,Installation of Exit point directional sounder
3
-
-
... More
160 mm Shoe
101
-
-
... More
Metering For Each Incomer :
-
-
-
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
-
... More
Credit for hardrock obtained at item no 2b) above (fixed rate of Rs. 200/- per cum)
39450
-
-
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
32 mm nominal bore
3
-
-
... More
Moc: CI casing, Bronze Impeller
-
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
-
-
-
... More
12W LED surface mounted fixture (Bajaj/Philips/Crompton/Wipro similar Bajaj: BGSLO Sleek surface 12 W WH RD)
309
-
-
... More
Design,Supply, installation and testing and commissioning of Horizontal Multistage monoblock Centrifugal pump with necessary grouting, foundation bolts, etc. including customs clearance and transportation to site , testing and commissioning of constant speed hot water pumps. Each Pump capacity shall be 30 USGPM @ 15 mt. head, mounted on frame with factory fitted nessary fittings, valves , pressure guages,header , control panel and expansion tank (100 L) as per specification (1 working + 1 stand by).
1
-
-
... More
Supply of Bed side lockers of size 900 W X 500D X 1400 H mm made with 22 gauge CR sheet, steel surfaces shall be anti corrision treated and oven baked powder coating, top, bottom, sides material thickness should be 0.9mm and back material thickness should be 0.8mm, removable main door with stiffeners of material thickness 0.9mm should be provided. with spray paint with 2 openable shutters inside having a hanger rod LHS and two shelves RHS etc., all complete as per approved design and as decided by Engineer -in-charge.
4
-
-
... More
Up to 35Sq.mm
15370
-
-
... More
1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
1680
-
-
... More
Supply, Installation, Testing and Commissioning Acoustic Insulation 10mm thick for Supply air ducting with open Cell Chemically Cross Linked Polyethylene material with necessary adhesives and Supports.
30
-
-
... More
All works above plinth level upto floor V level
1300
-
-
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Supply & commissioning of following size 1.1KV grade XLPE insulated FRLS sheathed armoured aluminium / copper conductor armoured cable. The cable shall conform to IS 7098/ Part I.
-
-
-
... More
1 no's. spare feeder with 32 A
-
-
-
... More
Manufacture and supply of Writing chair having with seat & back cushion with fabric of approved shade etc., complete all as per Model no:FU1007XXV of Godrej Make or eqivalents of Wipro/Featherlite/Durian/Ikea.
50
-
-
... More
150 NB
1
-
-
... More
63A,35KA FP MCCB with TVSS – 1set
-
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
... More
All kinds of soil.
3480
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
270
-
-
... More
Credit for hardrock obtained at item no EW-2b) & EW-4b above (fixed rate of Rs. 200/- per cum)
6497
-
-
... More
Busbars : 250A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
Supply, erection, testing and commissioning of Electrical operated Fire pump of horizontal split casing type with a speed of 1440 RPM and of capacity 2850 LPM against a total head of 70 mtrs, complete with TEFC Motor class- F insulation suitable for the pump, base plate, coupling, coupling guard ,foundation bolts and nuts etc., complete. (The pump shall be capable of furnishing not less than 150% of the rated discharge at a head not less than 65% of the rated head and the shut-off head shall not exceed 120% of rated head as per TAC guidelines)
1
-
-
... More
Flush/ Ruled pointing
500
-
-
... More
Supply, installation, Testing and Commissioning of 3 phase and Neutral 415V 4 wire Free Standing Floor mounted IGBT based Hybrid Power factor correction panel as per Technical specification
1
-
-
... More
Extra for depth beyond 45 cm of brick masonry chamber :
-
-
-
... More
Providing maintenance free Earth station with consisting of 40 mm dia pipe standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, sealed at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5 mtrs. Bentonite compound (as per equipment supplier) upto a depth of 2.0 meters around the electrode capsule. Brick chamber & CI Cover complete.
6
-
-
... More
4Way TPNMCBDB with 40A 4Pole MCB & 4P 32KA SPDs as incomer and 12nos 6-25A SPMCBs as outgoings.
3
-
-
... More
Supply, installation ,testing and commissioning &Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 :
-
-
-
... More
20A 10KA TPN MCBs -3nos
-
-
-
... More
0-250A Digital Ammeter with CTs of ratio 250/5A, Class 1 Accuracy and 15VA burden and selector switch -1 set
-
-
-
... More
Supply and erection of steel stepped and swaged tubler poles of 9mtr. Long (410 SP25) (1.5mtr below Ground) with base plate, earthing studs,1.5Mtr out reach single arm, FRP terminal box, 2nos 50mm diaclass B GI Pipe for incoming and outgoings cables as per drawing, including PCC Pedestal complete with painting with black bitumin paint inside the coping for embedded portion and two coats of Zinc chromate primer and two coats of Aluminium paint externally for length above the ground. The pole shall be with Junction box consisting of MCB. The wiring from Junction box to Light fixture shall be carried out with 3core 2.5sq.mm multistrand conductor cable. The Pole shall be fixed with 72W LED Lamp with fixture including supply of street light fixture. (Bajaj/Philips/Crompton/Wipro similar to Bajaj : BRTFG 72W LED V3)
420
-
-
... More
Metering For Each Incomer :
-
-
-
... More
Capacitor Bank shall have the following : ON/OFF Indication lamps Analog Ammeter with CTs and selector switch . The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
RO Pressure vessel , 300 Psi rating, model 80-30-1E, end ports and internals, 1 Set, Make : Pentair
-
-
-
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.
a) Triple strip vertical type
325
-
-
... More
Supply of following 900 RPM exhaust fan suitable for single phase, 240V, AC supply complete with motor, MS louvers, mounting brackets, all accessories etc complete.
-
-
-
... More
Supply and Installation of Fire dampers with fusible links&Eletronic actuators connected to FA system with frame etc. (Dampers should be of wall / duct mounted) as per the specifications and approved drawings.
5
-
-
... More
FPB-10 (Weather proof double door outdoor type)
1
-
-
... More
18. Car enterance : Center opening power doors with SS No. 4
-
-
-
... More
The PCC shall have at least two spare cubicles. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels including supply and fixing of the same. Every ACB shall be provided with ON/OFF /Trip Indication lamps of LED type. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely.ACB's shall have built-in All ACBs shall be provided with Digital type Ammeter of suitable range along with CTs. All ACBs shall be provided with ON/OFF/TRIP indication lamps and shunt trip coils. All MCCB/ACBs of rating 160A and above shall be with Micro processor releases All MCCBs below 160A shall be with adjustable thermal magnetic based releases. All MCCBs shall be with spreader links and rotary handle. All MCCBs shall be over load & short circuit releases with Icu=100% Ics. All CTs/CBCT shall be resin cast type. All Controlling wiring shall be FRLS cables, all the bus bar sleeves shall be Heat shrinkable kits. Panels shall have form 4b/form 3b construction as per the requirement. ACBs shall conform to IEC 60947 (part 1&2), shall be suitable for rated system voltage 690V, Insulation voltage 1000V and Impulse withstand of 12KV. In case of 4 pole ACB, neutral rating shall be 100% of phase.ACBs shall have same height & depth for entire range irrespective of frame size. ACBs shall have Icu=Ics=Icw (Icw rating shall be for 1 sec). ACB's shall have ready to close contact.
-
-
-
... More
Controls
-
-
-
... More
Supply, Installation, Testing and Commissioning of SOFT COPPER 18 swg REFRIGERANT PIPING 18 swg for high wall units of various sizes with necessary supports, fittings, interconnecting the liquid and suction lines between the aircooled outdoor unit and the indoor unit. Both suction and liquid line shall be insulated with 13 mm thick nitrile rubber tubes as insulation material and shall be covered with treated woven glass fiber reinforced covering for inside Piping and including making required holes in the wall and re finishing and water tight of holes after laying holes as per the specifications and approved drawings.
-
-
-
... More
40/63A 25KA FP MCCBs - 4nos
-
-
-
... More
FPB-2 (Weather proof double door outdoor type)
1
-
-
... More
Credit for hardrock obtained at item no 2b) above (fixed rate of Rs. 200/- per cum)
125
-
-
... More
LED Indications for R-Y-B phases indication with fuse control -1set
-
-
-
... More
3C X 240 sq.mm, 11KV, Straight through joint
29
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
180000
-
-
... More
250A 35KA FP MCCBs – 1no
-
-
-
... More
Outgoings :
-
-
-
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.
-
-
-
... More
50mm dia
4
-
-
... More
32. Controls: Resolve Micro Processor based simplex full collective control with or without attendant operation.
-
-
-
... More
Providing Indoor Heat shrinkable end terminations for the cable specified above with all materials, Bi-metallic lugs using crimping tool, 11KV Insulation tape, Identification tags etc., including end termination and Earthing of Gland.
-
-
-
... More
Utility Panel
6
-
-
... More
1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
70
-
-
... More
Supply, installation, testing and commissioning of 2.5 Km range Siren with Weather proof motor with 220V 50HZ AC Supply operation with required power contactor, MPCB for control all in a weather proof enclosure near motor including all installation materials as required.
1
-
-
... More
25NB (GM Gate Valve)
1
-
-
... More
3C X 6 Sq.mm Copper
6
-
-
... More
Supply, Installation, Testing and Commissioning of Opposed type GI Volume Control dampers with matching flanges of sizes as per the approved drawings
15
-
-
... More
4.0 TR
11
-
-
... More
250 NB (6 mm thick)
60
-
-
... More
Ordinary rock
281
-
-
... More
125 mm
435
-
-
... More
VRF SYSTEM:
-
-
-
... More
Finishing walls with water proofing cement paint of required shade
-
-
-
... More
15 mm nominal bore
8
-
-
... More
Manufacture and supply of Rifile rack for 12 rifiles made out of 50mmm thick teak wood frame work with provision of individual holding & locking arrangments for the rifiles all complete with Spirit polish etc., complete.
7
-
-
... More
21. Special features/other features : Automatic Rescue Device.
-
-
-
... More
3.5C X 300 Sq.mm
5485
-
-
... More
Instrumentation : pressusre gagues 2 Nos., Level switches for semi auto operation, on line flow meters for permeate and reject, on line conductivity meter with cell - 1 Lot
-
-
-
... More
22. Call register type KDS-50 Micro pushbutton for Car and landing.
-
-
-
... More
8. Post carbon (Silver Nano technology)
-
-
-
... More
Chapter XXV- Area Development
-
-
-
... More
Supply, installation, testing and commissioning of Plant room MCC panel of 3 phase 415 V free standing floor mounted made out of 14 G MS sheet after seven tank processes and painted with Powder coating as required , the compartment having cut out of minimum 3mm . the panel shall be for out door application with class protection not less than IP-65 , as per the specifications and approved drawings with earth leakage relay.
1
-
-
... More
Moc: CI casing, Bronze Impeller
-
-
-
... More
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre
485
-
-
... More
Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by Per Sqm the department) and as per direction of officer in charge.
100
-
-
... More
4C X 16Sq.mm
20
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
6500
-
-
... More
Supply, Installation, Testing and Commissioning of Outdoor type panel with 120A 4-pole MCCB incomer,Aluminum busbars with 0.8A/Sqmm rating Outdoor Units enclosed in a weather proof box suitable for out door application with class protection not less than IP - 65 with - Outgoing:
1
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
Hydrant system
-
-
-
... More
Subhead - XV : Internal Electrification
-
-
-
... More
3.5C X 25Sq.mm- Copper
14
-
-
... More
EARTHING
-
-
-
... More
25 X 5mm Copper strip
250
-
-
... More
Manufacture and supply of Wooden dunnage of size 1800mm x 900mm x 300mm made of 75mm x 30 mm hard wood frame work , top made of hard wood strips of width of 100 mm placed adjacent to each other with minimum gap of 10 mm with 50 X 50 mm hard wood legs for load carrying capacity of upto 1 tone weight etc., complete.
2
-
-
... More
The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ±0.05-cm. thick HR steel.The center tilt mechanism shall be designed as-360° revolving type, 17° ±2° maximum tilt on pivot at center, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall have an adjustment stroke of 12.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm.(76.3±1.0 cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 44.2 to max 54.2cm, Height - min103.3 to max 115.3cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.Etc; complete all as per Make Godrej model REGENCY 7001D or Equivalent specifications of Wipro/Featherlite/Durian/ HOF/ERGO.
-
-
-
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Made of G.I. wire of dia 4 mm
330
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
18
-
-
... More
Outgoings :
-
-
-
... More
- Brick chamber & CI Cover complete.
-
-
-
... More
For MCCB with Microprocessor based release : A common indication LED for internal temp/ fault/alarm . MCCB should have in-built feature of logical selectivity by which it can give a time delay of 50msec between upstream and downstream MCCB & ACB. The microprocessor based release should have the following settings:
• Overload Settings: 0.4 to 1 times of Ir
• Short Circuit Settings: 1.25 to 10 times of Ir.
• Earth fault Settings: 0.2 to 1 times of In.
• Neutral protection settings: 0 – 50% – 100%Ir. • Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. • MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) • The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material.
-
-
-
... More
Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately)
-
-
-
... More
100A 35KA FP MCCBs - 4nos
-
-
-
... More
Supply, Installation, Testing and Commissioning of Clean room compatible Single Leaf Emergency Doors 1000 (W) x 2100mm (H) as per specification without door closure
3
-
-
... More
0-160A Digital Ammeter with CTs of ratio 160/5A, Class 1 Accuracy and 15VA burden and selector switch -1set
-
-
-
... More
Credit for hardrock obtained at item no 2b) above (fixed rate of Rs. 200/- per cum)
16895
-
-
... More
400A Digital Ammeter with CTs of ratio 400-200/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
Size of Tile 800x800 mm
1215
-
-
... More
Chapter XIV : Fire Fighting
-
-
-
... More
Supply of side unit of size 1200 x 450 x 625mm made out of 18/12mm commercial plywood with 3.5mm thick veneer of approved shade for frame / box work, shelves, shutters,drawers and top, exposed internal surfaces finished with 0.60mm thick lamination of approved brand and shade, drawers with sliding channels, all exposed edges to have teakwood beading, top to have moulded teak wood beading, superior quality brushed steel hardware fittings, locking arrangements, P.U polish finish to top and melamine polish finish to all exposed veneer surfaces, un exposed internal surfaces shall be finished with 2 coats of enamel paint and wood primer including surface preparation etc., complete all as directed.
2
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
... More
200 NB (6 mm thick)
50
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete (a) 50 to 80 mm nominal bore:
1
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
Resin cast CTs of ratio 50-125-250/5A, Class 1 Accuracy and 15VA burden on R phase for APFCR -1no
-
-
-
... More
100KVA
1
-
-
... More
Busbars : 400A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
Supply, Installation, Testing and Commissioning Thermal Insulation 19mm thick for Supply air ducting with Closed Cell Chemically Cross Linked Polyethylene material of Nominal density shall be 33 ± 3 Kg/m3, having a thermal conductivity of 0.0328 W/m °K at 23°C, mean temperature. The material shall be conform to BS 476 Part 7 Class 1 category and shall be supplied in the required thickness suitable for the location and conditions prevalent with a vapor barrier as aluminium foil on one side and self adesive tape / SR Fevicol 505 grade and covered with 7mil thick chemically treated woven glass cloth having density 205 +/- 10g/sqm at all joints for inside Ducts as per the specifications and approved drawings.
120
-
-
... More
The items listed below shall be under the scope of supply
-
-
-
... More
RO membrane, model CPA2 4030, - 1 No., make Hydranautics
-
-
-
... More
Motor rating - 12.5 HP
-
-
-
... More
200KVA
2
-
-
... More
Incoming : 400A, 35KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
160A 35KA FP MCCBs - 2nos
-
-
-
... More
Each Capacitor Bank shall have the following : ON/OFF Indication lamps Ammeter with CTs and selector switch Manual Selector switch with 1set of ON/OFF Push buttons for Manual Operation. The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
63A, 25KA FP MCCB - 2Nos
-
-
-
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,
(i) Single socketed pipes.
-
-
-
... More
Credit for hardrock obtained at item no 2b) above (fixed rate of Rs. 200/- per cum)
3000
-
-
... More
i) Shrubs Plant
1600
-
-
... More
Supply, Laying, testing and commissioning of Medium grade G.I. Pipes conforming to IS 1239 Part - I including all necessary fittings etc., complete for sizes
-
-
-
... More
Door size up to 6.0 m x 8.0 m
25400
-
-
... More
Providing maintenance free Earth station with consisting of
2
-
-
... More
MV Panels
-
-
-
... More
Outgoings :
-
-
-
... More
All works above plinth level upto floor V level
3000
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
3.5C X 300 Sq.mm Straight Through joints
1
-
-
... More
4C X 16Sq.mm Straight Through joints
1
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres.
142000
-
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
150mm x 54mm, The Load bearing capacity of the Cable Trays should be minimum of 29.51KG/meter at the span of 1.5Meter.
225
-
-
... More
Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
Supply, installation ,testing and commissioning & Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints
-
-
-
... More
800A VCBs with Ammeter with CTs, Load Manager with RS 485 (PM 8000) with Modubus connectivity, Numerical type Overload & Earth Fault relay , Auxilary Relays for Bucholtz's Alarm & Trip and Oil/ Winding temperature alarm & Trip, Phase Indication Lamps, Breaker On/Off/ Trip and Spring Charge, trip circuit healthy Indications - 1no (As Transformer Controlling Breakers).
-
-
-
... More
Supply of cots of following sizes made out of 18mm thick plywood with 3.50 mm thick veneer, teak wood frame made out of 72x37mm thick for horizontal supports, top with 75mm high and 19mm thick ply, all exposed edges shall be covered with 6mm teak wood beading, with melamine polish complete all as specified.
-
-
-
... More
20A 10KA TPN MCBs -3nos
-
-
-
... More
Telephone sockets (RJ11)
206
-
-
... More
100A, 35KA TPMCCB with suitable capacitor duty rating Contactor and 25 KVAR MPP 440V Delta connected heavy duty Capacitor Banks - 2nos
-
-
-
... More
8. Low oil pressure
-
-
-
... More
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
750
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1set
-
-
-
... More
16 HP OUT DOOR UNIT
1
-
-
... More
REFRIGERANT PIPING:
-
-
-
... More
800A 50KA FP MCCBs - 1no
-
-
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed I XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
... More
Supply & laying in existing trench / hume pipe
480
-
-
... More
35. Lift Announcement System (LAS)
-
-
-
... More
Supply, Installation, Testing and Commissioning of Magnehellic gauges for measuring the differential pressure across HEPA filters for the AHUs of range 0 to 50mm
2
-
-
... More
12Way SPNMCBDB with 40A 2Pole MCB & 2P 16KA SPDs as incomer and 8 nos 16-25A SP MCBs as outgoings.
5
-
-
... More
Ø 50 mm
5
-
-
... More
Supply and laying of RG 6 Cable in existing conduit
550
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
11000
-
-
... More
Shoe (Plain)
-
-
-
... More
ii) Shrubs area : 280 Sqm
-
-
-
... More
Providing and filling in floor depressions with cinder concrete composed of one part of cement, five parts of coarse sand and ten parts of cinder (1:5:10) of 12.5mm nominal size cinder by proportion mixed to uniform consistency using optimum quantity of water, spreading, sectioning and compacting to the desired levels etc., complete all as per specifications
105
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
MCC 1
1
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1set
-
-
-
... More
3.5C X 35 Sq.mm - Copper
14
-
-
... More
Busbars : 100A TP with 100% Neutral Aluminium Busbars-1set
-
-
-
... More
Light/Fan Fixtures
-
-
-
... More
19. Landing enterance : Center opening power doors with SS No. 4
-
-
-
... More
3.5C X 185 Sq.mm
16
-
-
... More
Supply, testing and commissioning of following size 11KV(E) XLPE insulated armoured aluminium conductor under ground cable. The cable shall conform to IS 7098/ Part II.
-
-
-
... More
24 G (0.6 G)
80
-
-
... More
400A Digital Ammeter with CTs of ratio 400-200/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
25 mm nominal outer dia Pipes
194
-
-
... More
1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size).
270
-
-
... More
Ridges plain (500 - 600mm)
65
-
-
... More
ON/OFF Push Buttons for manual operation -1 Set
-
-
-
... More
Supply, Installation, Testing and Commissioning of Solid 80 mm thick Double Skin Clean Room Wall panels made up of 0.8 mm thick GI Precoated sheet (appliance white colour), Infill material PUF with all accessories as per standards
190
-
-
... More
Supply, laying, testing and commissioning of C-class MS pipes conforming to IS 1239 upto 150 NB and IS 3589 from 200 NB including all required bends, fittings, flanges, bolts, nuts, welding of joints and painting with two coats of postal red enamel paint over one coat of primer etc., complete and of following sizes:
-
-
-
... More
ELECTRICAL
-
-
-
... More
Supply, installation, testing & Commissioning of Three phase 125A 3P+N+E wall mounted switched interlocking sockets and surface mounting with 3P+N+E plug including all fixing accessories. (IP67) with enclosure. The enclosure shall have provision for entry for incoming & Cables for outgoing and including MS angle (50x6mm) iron frame up to a height 1Mtr including foundation)
15
-
-
... More
Geological Survey by specialist Agencies and submitting the report for number of poit surved and yield available
5
-
-
... More
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
-
-
-
... More
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge.
2000
-
-
... More
17. Electric light/fan : LED / Suitable fan
-
-
-
... More
Supply, erection, testing and commissioning of pressure switches for fire fighting pumping system.
4
-
-
... More
20A 10KA TPN MCBs -3Nos
-
-
-
... More
Supplying and application of DAP of approved quality at site of work as per directions of Engineer-in-charge.
1829
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
1. phase indication
-
-
-
... More
iii) Hedge area : 140 Sqm
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 75
1
-
-
... More
Providing and fixing 25 mm dia SS drapery rods, with decorative SS finials & brackets fixed with SS screws and wooden plugs, etc., wherever necessary complete :
b) 25 mm dia
320
-
-
... More
Supply of study chairs of size 475x460x780mm made out of 50x30mm teak wood frame work with arms, 50mm rubber foam on seat, upholstered with fabric of approved quality with Melamine polish.
13
-
-
... More
Granite of any colour and shade
-
-
-
... More
Supply, Installation, Testing & Commissioning of Amplifier.
1
-
-
... More
Outgoings :
-
-
-
... More
Supply, Installation, testing & commissioning of weather proof type box (IP-65) made out of 2 mm thick CRCA sheet including painting with epoxy powder coating outdoor panel consisting of 1nos- 125 Amps TPN MCCB as incomer with spread links & 3 no's (2 W+1 Spare) of 32 Amps TPN MCCB as outgoing with spread links along with following metering (Voltmeter, Ammeter, CTs) complete. The box shall be mounted on suitable angle frame work on PCC pedestal.
0-500V Digital Voltmeter with selector switch.
0-125A Digital Ammeter with resin cast CTs of ratio 125/5A Class 1Accuracy and 5VA burden and selector switch.
LED Phase indication lamps with individuals MCBs and control with toggle switches.
1
-
-
... More
50 X 5mm Copper strip with slevee
-
-
-
... More
63A,35KA FP MCCB with TVSS – 1set
-
-
-
... More
Providing and fixing in position Health faucet of approved equivalent make conforming to IS Standard along with 600mm long hose pipe and Two way bib cock of approved make with all necessary fixtures etc all complete as specified and as directed.
84
-
-
... More
SUBSTATION ACCESSORIES
-
-
-
... More
18 mm thick
85
-
-
... More
110x110x110 mm
22
-
-
... More
750KVA 11KV DG Sets
25
-
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses - 1set
-
-
-
... More
Incoming : 250A, 35KA 4Pole MCCB and over load, short circuit, earth fault relay with CBCT -1set
-
-
-
... More
Providing and fixing Sensotronic Sens Flushing Valve for Urinal with complete Kit (Jaquar make, Model No.SNR-CHR-51097 / Parryware / Hindware or Equivalent Approved make)
2
-
-
... More
Fire Alarm System with PA System
-
-
-
... More
Incoming 1 : 630A, 50KA 4Pole MCCB and over load, short circuit, earth fault relay with CBCT -1set
-
-
-
... More
4C X 16 Sq.mm - Copper
310
-
-
... More
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
11
-
-
... More
63A 25KA FP MCCB with TVSS – 1no
-
-
-
... More
For 150 mm dia sand cast iron drop connection
5
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in
-
-
-
... More
11W LED Decorative Wall mounted light Fixture (Bajaj/Philips/Crompton/Wipro similar Philips : PHILIPS 30948)
27
-
-
... More
3C X 95Sq.mm,11KV (E)
50
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
1462
-
-
... More
3.5C X 240 Sq.mm
5275
-
-
... More
Supply and laying of following size 0.5mm dia Jelly filled copper conductor armoured Cables in ground at 600mm below ground level including excavation, and refilling of earth, laying of cables, providing protection with sand and bricks on top and sides and Telephone cable route markers at every 50mtrs interval complete as required and as directed by Engr-in-charge. The rate shall include cable end terminations also using kits cable glands cable lugs etc as required complete.The cable shall be as per the DOT specifications.
-
-
-
... More
MAINTENANCE
-
-
-
... More
110 mm diameter
649
-
-
... More
Supply, erection, testing and commissioning of Double Headed Fire Hydrant with 63 mm female instantaneous outlet in oblique type complete with cap & chain generally as per IS 5290.
6
-
-
... More
CT Operated Load manager (Similar to EM-6400 NG) – 1set
-
-
-
... More
Incoming : 400A, 35KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge.
-
-
-
... More
Chapter X : DG Sets
-
-
-
... More
6. Serving : 3 stops, 3 levels,3 openings
-
-
-
... More
AIR FILTRATION SYSTEM
-
-
-
... More
Supply, installation ,testing and commissioning &Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 :
-
-
-
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
470
-
-
... More
BOD 5 to10 mg /l , COD 30 to 50 mg/l, total suspended solids 5 to10 mg/l, PH value 6.5 - 8.0, oil and grease 10 mg/l, temperature 25 - 300C
-
-
-
... More
10W LED Light Fixture ( Bajaj/Philips/Crompton/Wipro similar Bajaj : BCLSB 10WH)
40
-
-
... More
3.5C X 70 Sq.mm
6
-
-
... More
Twin rubber stopper
217
-
-
... More
150 mm diameter pipe
4
-
-
... More
32 X 5mm Aluminium strip conductor with DMC Insulated Supports
1665
-
-
... More
Blending water filters 2 Nos. in series type disposable cartrdige, size : 10" long of 1 and 5 micron rating PP spun bonded with interconnections - 1 Lot
-
-
-
... More
Incoming : 250A, 35KA 4Pole MCCB with Micro Processor releases for Overload, short circuit, Earth fault & Earth leakage relay with CBCT- 1set.
-
-
-
... More
The pedestial shall be fabricated from 0.2+/-0.02cm thick HR sheet, chrome plated and assembled with injection moulded black polypropylene hub cap. The size of the pedestal shall be 66.0+/- 0.5 cm pitch-centre-dia (76.0 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 76.0cm, Depth of Chair - 76.0cm as measured from pedestal below. Height from ground - min 101.5 to max 117.5cm. Seat height - min 46.9 to max 55.9cm. Dimensions tolerance / variations shall be within +/- 1 cm etc; complete all as per Make Godrej model KAREENA or Equivalent specifications of Wipro/Featherlite/Durian/ HOF/ERGO.
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
11
-
-
... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C.pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including
testing of joints etc. complete
-
-
-
... More
All kinds of soil
86
-
-
... More
Supply and stacking of Cassia siamea plant of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
500
-
-
... More
Providing and fixing in position single low flow over head shower of approved equivalent make with all accessories and fixing charges etc complete.
32
-
-
... More
Providing of Aglaonema Silver Queen plant, having ht. 30 cm to 45 cm. with 12 to 15 leaves, multi suckers, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot.
100
-
-
... More
Chapter IX : Fire Alarm System
-
-
-
... More
Above 120 sq. mm and upto 400 sq. mm
20
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
... More
Supply of Mid back chairs made up of 1.2cm thick hot-pressed plywood for seat and back, upholstered with fabric upholstery covers and moulded polyurethane foam. BACK SIZE : 47.5 cm. (W) with SEAT SIZE : 47.0 cm. (W) x 48.0 cm. (D) The polyurethane foam is moulded with density = 45 ±2 kg/m and hardness = 20 ±2, on hampden machine at 25% compression. The one-piece armrests are injection moulded from black Co-polymer polypropylene.The chair shall have center tilt mechanism. The bellow is 3 piece telescopic type and injection moulded in black polypropylene. The pedestal is injection moulded in balck 30% glass-filled Nylon and fitted with 5 Nos. of Twin wheel castors. The twin wheel castors are injection moulded in 30% glass filled black Nylon etc., complete all as per Model no: PREMIER -FU7102R of Godrej Make or eqivalents of Wipro/Featherlite/Durian/Ikea.
67
-
-
... More
Ø 19.1 mm
30
-
-
... More
Chess Tower-1&2
2
-
-
... More
Storage tank, cylindrical, vertical, capacity : 1000l, SS 304 or higher with GI stand - 1 Set, Make : Sai hitek
-
-
-
... More
Supplying and drawing following pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit with including all terminations in both sides as required.
-
-
-
... More
Supply, installation ,testing and commissioning &Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
-
-
-
... More
Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment).
230
-
-
... More
Magnehellic gauges
-
-
-
... More
All Socketed 90deg bend
-
-
-
... More
Supplying, installing ,testing and commissioning of addressable Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete and as per technical specification
24
-
-
... More
Constructing of Valve Chamber of size 750 x 750 x 1000mm deep comprising of 230mm thick brick walls in cement mortar 1:5 over a bed of 150mm thick PCC 1:4:8 alround beyond the masonry faces plastered with CM 1:3 mixed with approved water proofing compound as per manufacturer's specifications, 13mm thick on internal, external, top surfaces, finished smooth with a floating coat of neat cement, providing and fixing painted light duty double seal CI frame and cover of size 600 x 450mm weighting not less than 52 kgs conforming to IS 1726 with locking arrangements, fixing the frame in RCC 1:2:4 including fabrication, form work, curing etc., complete all as specified and directed.
2
-
-
... More
Supply and laying of following size earth strips including excavation and refilling of earth when laid in ground and with all fixing accessories when laid on the wall with necessary interconnections with earth station and equipments.
-
-
-
... More
With frosted glass 4.0 mm thickness
65
-
-
... More
All Socketed 45deg bend
-
-
-
... More
Busbars : 400A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
Ø 41.3 mm
130
-
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts ofstacked volume of earth after reduction by 20% : 1 part of stacked volumeof manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost ofmanure, sludge or extra good earth if needed to be paid for separately) :
-
-
-
... More
32mm dia
4
-
-
... More
63/40A 25KA FP MCCB – 3nos
-
-
-
... More
Providing and fixing pull Handle of Dorma Model no. TGDI35025S or approved equivalent back to back with adjustable fixing for glass , wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length-350mm, 25mm dia, and grade SS304
10
-
-
... More
Supply of Medium back Executive chair with seat shall be made up of 1.2+/-0.1cm thick hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric or synthetic leather and moulded polyurethane foam. The back shall be made up 1.2+/-0.1cm thick hot pressed plywood upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. The moulded polyurethane foam shall be of density 45+/-2kg/m ³, and hardness load 16+/-2kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 51.0cm(W) x 48.0cm(D) and of back shall be 48.0cm(W) x 64.5Cm(H). The armrest top shall be made of moulded polyurethane and mounted on to a drop lift height adjustable type M.S tubular armrest support chrome plated. The armrest height shall be adjustable up to 6.5+/-0.5cm in 5 steps and also has swivel adjustment of 22 degree+/-2 on both sides. The mechanism of the chair shall have following features : 360⁰ revolving type, Knee tilt synchro mechanism, Tilt tension adjustment, Single point control, 4 position locking with anti shock feature, Seat/Back tilting ratio of 1:2. Seat depth adjustment of 6.0+/-0.5cm should be locked in 6 positions. The backrest shall consists of a sliding up down mechanism, Which can be adjusted in the range of 7.5+/-0.5cm and should be locked in 4 positions for correct position of lumber support.The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm.
46
-
-
... More
Supply of steel sofa low back chair of size 600 x 600 x 670 mm with powder coated with seat and back with fabric of approved shade all complete as per drawing.
24
-
-
... More
Each Capacitor Bank shall have the following : ON/OFF Indication lamps Ammeter with CTs and selector switch Manual Selector switch with 1set of ON/OFF Push buttons for Manual Operation. The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
Supply, Installation, Testing and Commissioning of CPVC (Chlorinated Poly Vinyl Chloride) pipes condensate drain piping insulated using 9 mm thick nitrile rubber tubes including fitting and supports as per the specifications and approved drawings.
-
-
-
... More
All works upto plinth level
200
-
-
... More
25 NB
4
-
-
... More
LIGHT FIXTURES AND POWER SOCKETS (Compatable to Clean Room)
-
-
-
... More
Supply and Fixing of Laminated SLD-A1size
7
-
-
... More
DX-SYSTEM
-
-
-
... More
Manufacture and supply of Wall mirror of size 900mm x 600 mm made out of 18mm plywood with 1 mm thick laminate frame with Mirror fixed have lipping finished with sprit polish etc., complete.
3
-
-
... More
125A 35KA FP MCCBs – 5nos
-
-
-
... More
500KVA
1
-
-
... More
Busbars : 125A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water).
-
-
-
... More
Flexible pipe
-
-
-
... More
4C x 10 sq.mm. (Copper) (for outdoor Units)
135
-
-
... More
HOT WATER PUMPS
-
-
-
... More
3.5C X 50 Sq.mm
8
-
-
... More
Complete maintenance of shrubs (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by Per Shrub the department) and as per direction of officer in charge.
600
-
-
... More
Supply of Bar stool of 425mm dia x 1125mm (H) with base diameter of 430mm MS Chrome plate frame work with top to have leatherite cushion seat with revolving base etc., complete as per approved drawings.
4
-
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
... More
3C x4sqmm (copper ), pvc Flat Water proof cable.
420
-
-
... More
Supply and fixing of modular type single phase 1no 16A 6pin shuttered type Socket with 1nos 16A switch with front plate and anodised GI box including all fixing accessories.
29
-
-
... More
Supply, Installation, Testing and Commissioning of Refrigerant Piping Joint For Suction Line.
86
-
-
... More
Size 90x80 cm
-
-
-
... More
Extra for depth for manholes
-
-
-
... More
d) One 15mm Angle Stop Cock (Jaquar make, Model No. KUP-35053PM or Equivalent Approved make) on the inlet to the basin
-
-
-
... More
Supply, Installation, Testing and Commissioning of Outdoor type panel with 160A 4-pole MCCB incomer,Aluminum busbars with 0.8A/Sqmm rating Outdoor Units enclosed in a weather proof box suitable for out door application with class protection not less than IP - 65 with - Outgoing:
2
-
-
... More
65 NB (Borewell to sump)
100
-
-
... More
AIR DISTRIBUTION SYSTEM:
-
-
-
... More
Chapter III - Air Conditioning
-
-
-
... More
3.5CX50SQ.MM -Copper
1760
-
-
... More
250 NB
5
-
-
... More
20. Indicators car & landings: 7 Segment 25mm digital direction and indicators in car and at all landings.
-
-
-
... More
Incoming : 800A VCBs with Voltmeter with Line PT & Bus PT, Ammeter with CTs, Load Manager with RS 485 (PM 8000) with Modubus connectivity, PF Meter, Numerical type Overload & Earth Fault, directional relays, Phase Indication Lamps, Breaker On/Off/ Trip and Spring Charge, and Trip Circuit healthy Indications - 2nos
-
-
-
... More
Hard rock (requiring blasting)
8120
-
-
... More
Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specificaton, complete and as per directions of Engineer-in-Charge.
-
-
-
... More
6Way TPNMCBDB with 40A 4Pole MCB & 4P 32KA SPDs as incomer and 18nos 6-25A SPMCBs as outgoings.
4
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
9788
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with flush valve, fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
Single half stall urinal with flush valve
67
-
-
... More
a) Three Seater with Two arms in hoary colour without cushion
2
-
-
... More
40W IP65 LED Light fixture (Bajaj/Philips/Crompton/Wipro similar Bajaj : BIPC 40W LED XE)
210
-
-
... More
40 HP OUT DOOR UNIT (20+20)
2
-
-
... More
Ø 28.6 mm
85
-
-
... More
15 mm nominal bore
4
-
-
... More
50pair
4
-
-
... More
Metering :
-
-
-
... More
Supply, Installation, Testing and Commissioning of Hard copper REFRIGERANT PIPING of various sizes with necessary supports, fittings, interconnecting the liquid and suction lines between the AHU and the outdoor unit. The piping shall be carried out of Hard drawn copper pipes of type 'K with soldered / brazed socket fittings. Isolating valves shall be provided to isolate each compressor, strainers, sight glass and any other component requiring proper operation and maintenance. The suction line shall be insulated with 19mm thick closed cell insulation for above 25mm dia, 13mm thick for pipes below 25mm dia & exposed piping shall be covered with treated woven glass fibre reinforced covering and further finished with 24G Aluminium cladding as per the specifications and approved drawings.
-
-
-
... More
Supply, installation ,testing and commissioning &Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.
-
-
-
... More
40A AC1 Contactor with 230V Coil and a Time Switch- 1set
-
-
-
... More
Metering For Each Incomer :
-
-
-
... More
Supply of chair made out of 25mm dia C.R. Pipe with powder coating finish with P.U. arms finish with seat and back with bended plywood with cushioned of 32 high density rubber foam for seat and back with fabric / competitive lather or approved shade etc., complete all as Per Model no: MULTIPURPOSE FU1007 of Godrej make or equivalents of Wipro/Featherlite/Durian/Ikea..
26
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment).
1000
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
300X16mm
240
-
-
... More
3.5C X 95 SQ.MM - Copper
2
-
-
... More
New work (two or more coats) over and including water thinnable priming coat with cement primer
30125
-
-
... More
Manufacture and supply of 150mm deep key board for 30 Nos Keys made out of aluminium frame work back with soft board covered with fabric of approved shade, glass panel shutter with frame, key hooks, hardware fittings and locking arrangements etc., complete.
5
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
27600
-
-
... More
Total : 2712 Sqm
-
-
-
... More
Supply, installation, testing and commissioning of Diesel Engine driven pump of horizontal Split Casing type capable of delivering 2850 LPM at a head of 70 mtrs and coupled with suitable water cooled, diesel engine (Twin belt radiator cooled), electrical starting system with standard accessories, control panel, fuel tank suitable for 8 hours of operation & starting batteries, separate battery charger, selector switch for Auto/Manual operation as per manufacturers recommendations mounted on common base frame, including coupling guard, bolts and nuts etc., complete.(The pump shall be capable of furnishing not less than 150% of the rated discharge at a head not less than 65% of the rated head and the shut-off head shall not exceed 120% of rated head as per TAC guidelines)
1
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
8351
-
-
... More
Supply, Installation, Testing and Commissioning of stainless steel (s.s.) 18G (SS316) perforated sheets for HEPA filter modules in all cleanrooms as per the specifications and approved drawings.
15
-
-
... More
Same as above but with peg set of 3
5
-
-
... More
Supply, laying and commissioning of following size 1.1KV grade PVC insulated armoured copper conductor under ground cable, in built up cable trench/ already laid RCC hume pipe or on cable tray with all installation materials. The cable shall conform to IS 1554/Part I
-
-
-
... More
125A Digital Ammeter with CTs of ratio 120/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
All works upto plinth level
49
-
-
... More
Supply installation Testing and commissioning of 11KV 350MVA outdoor HT Vacuum Circuit Breaker Panels consisting of number of Breakers as given below. The VCBs shall be with Motorized Spring Charging mechanism with inbuilt power pack (3closing & 3trips) and shall be as per detailed specifications. All VCBs shall have auxilary Relays and Annunciation and Protections e.t.c., as specified in Technical specifications. The Closing & Tripping Coils shall be suitable with InBuilt Power Pack. Over current & earth Fault relays as specified in Drawing. All VCBs shall have provision for Remote On/Off and for Remote On/ Off Indications wired upto a terminal block along with RS485 wiring from Load Managers. Surge arrestors of 9KV, 5KA shall be provided as part of HT VCBs. All meters shall be analogue. The panel shall consist of suitable rating TP Copper busbar. (at the rating of 1.2A/Sq.mm).
-
-
-
... More
Providing and fixing tubular handle with roses and Escutcheon in SS packaged with mortice lock set, 55mm backset, 20 SS forend, SS Strike plate and EP cyclinder of Dorma Model no.TH 123 or approved equivalent, Complete set including fixing accessories.
15
-
-
... More
RO skid : 40x1.2 square tubular structure with level screws., -1No.
-
-
-
... More
Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
-
-
-
... More
Manufacture and supply of table of size 900 x 600 x 750 mm made out of 18mm thick MR grade plywood for frame work, top and sides, all exposed playwood surfaces cladded with 1mm thick laminate, all exposed edges to have teakwood beading etc., complete with spirit polish and all as per drawing.
5
-
-
... More
400A 50KA FP MCCBs – 4nos
-
-
-
... More
Motor rating - 3.0 HP
-
-
-
... More
Providing of Aglaonema Parrot Jungle plant (three in one), having ht. 30 cm and above with 20 to 25 leaves, well developed, fresh & healthy in 25 cm size of Earthen pot / Plastic pot.
100
-
-
... More
INSULATION:
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. ( AS per IS 1200 No extra Amount shall be paid for excavation is done beyond 1.5 m depth if the excavation is done by mechanical means ) .
-
-
-
... More
40 mm thick with 20 mm nominal size stone aggregate
410
-
-
... More
Supply of Back unit of size 1800 x 450 x 625mm made out of 18/12mm commercial plywood with 1mm laminate of approved shade for frame / box work, shelves, shutters,drawers and top, exposed internal surfaces finished with 0.60mm thick lamination of approved brand and shade, drawers with sliding channels, all exposed edges to have teakwood beading, top to have moulded teak wood beading, superior quality brushed steel hardware fittings, locking arrangements, spirit polish finish to all exposed wooden surfaces, un exposed internal surfaces shall be finished with 2 coats of enamel paint and wood primer including surface preparation etc., complete all as directed.
7
-
-
... More
Ø 50 mm
115
-
-
... More
Providing CI foot rests including fixing in manholes with 20 x 20 x 10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design
-
-
-
... More
Providing maintenance free Earth station with consisting of 40mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, seald at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs.Earth enhancement compound upto a depth of 2.0meters arround the electrode capsule. Brick chamber & CI Cover complete.
2
-
-
... More
Interlocking : Electrical & Mechanical Interlocking between all Incomers and Bus coupler as per scheme indicated.
-
-
-
... More
6Stage Automatic PF Controller Relay (Microprocessor based) with PF Meter - 1set Each Capacitor Bank shall have the following : ON/OFF Indication lamps Analog Ammeter with CTs and selector switch Auto/ Manual Selector switch with 1set of ON/OFF Push buttons for Manual Operation. All contactors shall be heavy duty type.The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
Chapter II - Furniture
-
-
-
... More
Subhead - IX : Flooring
-
-
-
... More
Busbars : 800A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).
682
-
-
... More
40A,25KA TPMCCB with suitable capacitor duty rating Contactor and 10 KVAR MPP 440V Delta connected heavy duty Capacitor Banks - 3nos
-
-
-
... More
- 65mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, seald at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs.
-
-
-
... More
3.5C x 25 Sqmm AYFY
2
-
-
... More
Providing and Displaying plants Cladium Hybrid variety 3 to 4 plants in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour for rainy /summer seasons 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-incharge.
700
-
-
... More
Supply of Rubber Bath Mat of size 600mm x 450mm with coil embedded having rubberised edge band of approved shade etc; complete all as directed by Engineer -in-charge.
2
-
-
... More
250A,35KA TP MCCB with 250A AC3 heavy duty Contactor and 125KVAR IGBT based Capacitor Banks – 2nos
-
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
11903
-
-
... More
Supply and stacking of the following well developed,healthy,true to variety/type plants/Trees having minimum height as below mentioned at site work.
-
-
-
... More
Supply and laying of following size strips including excavation in any type of soil including SDR & hard rock and refilling of earth when laid in ground and with all fixing accessories when laid inside the building including all necessary interconnections with earth station and equipments.
-
-
-
... More
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mmsquare 3 mm deep.
-
-
-
... More
Busbars : 400A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4546
-
-
... More
Incoming : 400A, 35KA 4Pole MCCB and over load, short circuit, earth fault relay with CBCT -1set
-
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
-
-
-
... More
Manufacture and supply of Wooden stool of size 560mm x 300mm x 620mm made out of teakwood framework of size 45mm x 25 mm side rail and 45mm x 45 mm teakwood legs with 18mm thick plywood cladded by 1mm thick lamination on top, edges to have teakwood beeding all complete with spirit Polish etc., complete.
7
-
-
... More
Metering :
-
-
-
... More
400A Digital Ammeter with CTs of ratio 200-400/5A, Class 1 Accuracy and 15VA burden and selector switch - 1set
-
-
-
... More
40A, 25KA TPMCCB and 10 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -1no
-
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
40/63A 25KA FP MCCBs – 3nos
-
-
-
... More
Supply and fixing of washable wall papers of approved design and pattern, fixed with appropriate adhesive etc. all complete including preparation of wall surface.
150
-
-
... More
Up to 35Sq.mm
1710
-
-
... More
23. 3-Way Intercom
-
-
-
... More
Dosing pump, type : Electronic diaphragm operated capacty 0 -4 lph @ 4kg/sq.cm, PP, suction filter, injector assy, hose pipe, - 1 Set., make : Edose
-
-
-
... More
40A,25KA TPMCCB with suitable capacitor duty rating Contactor and 5 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -1no
-
-
-
... More
3.5C X 25 Sq.mm
4
-
-
... More
Supply and laying of 2.0mm thick 3.3KV Rubber Mats as per IS 15652 of size1000mm x2000mm
18
-
-
... More
Incoming : 100A, 25KA 4Pole MCCB and over load, short circuit, earth fault relay with CBCT -1set
-
-
-
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
... More
50pair armoured jelly filled cable
150
-
-
... More
Providing and laying Polished Granite Stone work for skirting, risers of steps over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.
355
-
-
... More
Supply and laying of twisted pair 2.5sq.mm shielded FRLS insulated copper conductor flexible wire through existing MS Conduit.
2518
-
-
... More
Supply of centre table of size 900x525x400mm with frame and legs made out of 60x35mm teak wood sections, top frame and legs polished in melamine finish, Top to have 10mm thick bevelled and etched glass.
8
-
-
... More
Supply, testing & commisioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor cable.The cable shall conform to IS 7098/ Part I.
-
-
-
... More
Supply of Steel Storage rack of size 2000 x 900 x 450 mm made out of MS "C" Angle of 2mm thick with five panels of M.S. sheet of 14 guage with spray enamel paint complete all as per make of Godrej or equivalents of Wipro/ Durian/Featherlite /Ikea Etc; complete. .
12
-
-
... More
40A 25KA 4Pole MCCB
1
-
-
... More
10pair
5
-
-
... More
Supply, Installation, Testing and Commissioning of PU painting on walls in outer corridor
210
-
-
... More
160A 35KA FP MCCBs – 1no
-
-
-
... More
iii) FAB feed pumps (2 Nos- 1 W+ 1 S) - Suitable for 35 KLD FAB
-
-
-
... More
One Light point controlled by one 6A switch.
31
-
-
... More
100A, 25KA TP MCCB with 7% detuned Reactor control with 2Nos of 25KVAR MPP 525VDelta connected heavy duty Capacitors with Capacitor duty Contactor-4sets
-
-
-
... More
40 HP OUT DOOR UNIT (20+20)
1
-
-
... More
450mm dia RCC pipe
200
-
-
... More
80 NB
4
-
-
... More
Ordinary rock
1668
-
-
... More
33. Door Safety : PANA 40-Full ray curtain for car door safety.
-
-
-
... More
0-500V Digital Voltmeter with selector switch and Fuses-1 set
-
-
-
... More
Supply and erecting 4.5KG Carbon Dioxide (CO2) Fire Extiguisher with necessary clamps made from 50 x 6mm M.S. Flat with Nut & Bolts growted in wall complete.
22
-
-
... More
f) Bottle Trap of JAQUAR Code No. ALD-769L / Parryware / Hindware or Equivalent Approved make with internal parttion, 32mm size with 300mm and 190mm long wall connection pipes and wall flange.
-
-
-
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
410
-
-
... More
Supply of Executive Table of size 2100 x 1000 x 750 mm made out of 18mm plywood with 3.5mm thick veneer of approved shade for frame / box work and top, exposed internal surfaces finished with 0.60mm thick lamination of approved brand and shade, four drawers on one side, front panel of 18mm thick plywood with 12mm thick niche with vertical / horizontal veneer grains, all exposed edges to have teakwood beading, top to have moulded teak wood beading, superior quality brushed steel hardware fittings, locking arrangements, P.U polish finish to top and melamine polish finish to all exposed veneer surface with etc., complete all as directed.
2
-
-
... More
Metering For Each Incomer :
-
-
-
... More
63/40A 25KA FP MCCBs – 9nos
-
-
-
... More
The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black nylon. Overall dimensions of Chair shall be, Width of Chair - 71.0cm, Depth of Chair - 71.0 cm as measured from pedestal below. Height from ground - min 115.5 to max 131.0 cm. Seat height - min 45.0cm to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. The cushioned seat assembly shall consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric. the insert moulded foam is assembeled over a load bearing plastic seat cover. The back shallmade up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-62.0cm & size of seat shall be (W)-52.5cm x (D)-51.0cm.
-
-
-
... More
Supply, Installation, Testing and Commissioning of CPVC (Chlorinated Poly Vinyl Chloride) pipes condensate drain piping insulated using 9 mm thick nitrile rubber tubes including fitting and supports as per specified .
-
-
-
... More
150 NB
4
-
-
... More
3.5C X 70 Sq.mm
175
-
-
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods
and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%),
flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately).
144
-
-
... More
20A 10KA TPN MCBs -3nos
-
-
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete,improve workability without impairing strength and durability as per direction of the Engineer-in-charge.
-
-
-
... More
3. Engine - hooter ACK
-
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
-
-
-
... More
Pressure Sand Filter FRP Dia.16" x 65" ht,10 bar rating with top opening, with 1"multi port valve, graded pebbles, coarse sand and fine filtering sand - 1 Set, make : Pentair,
-
-
-
... More
Supply and stacking of plant Tabernaemontana coronaria (Chandni single) variegated of height 60-75 cm, 5-6 branches in p.bags of size 25 cm as per direction of the officer-in-charge.
400
-
-
... More
63A,50KA FP MCCB with TVSS - 1set
-
-
-
... More
4Core 6 sq.mm
210
-
-
... More
63A,35KA FP MCCB with TVSS – 1set
-
-
-
... More
3C x 2.5 sq.mm. (Copper) (form indoor to power socket)
1060
-
-
... More
40A,25KA TPMCCB with suitable capacitor duty rating Contactor and 5 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -1no
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
4
-
-
... More
Armrests should be pressure die casted in polished aluminium with PP arm tops. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:3, Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. Overall dimensions of Chair Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below. Height from ground - min 101.0 to max 118.0 cm. Seat height - min 41.0cm to max 51.0 cm. Dimensions tolerance / variations shall be within +/- 1 cm. etc., complete all as Per Model no: MARVEL FU3301of Godrej make or equivalents of Wipro/Featherlite/Durian/Ikea..
-
-
-
... More
2.6 TR
3
-
-
... More
a) Vertical blinds with 100mm wide fabric with chain connected bottom weights etc.,
-
-
-
... More
Supply installation Testing and commissioning of Radiator cooled 600KW (750KVA @0.8PF) 11KV DG set with acoustic enclosure as per CPCB norms and consisting of Suitable capacity Engine with Electronic Governor and all other accessories as per detailed Specifications including Solenoid for Auto ON of Engine and Alternator as per specifications, with control panel, AMF Relay & NGR Panel. The Engine shall be suitable for continuous operation of Generator, inclusive of Flywheel, flexible coupling, air cleaner, corrosion resistor, Radiator, fan with guard, Fuel pump, fuel filter, Electronic governor, starting system with separate Battery charger with 2nos 24Vsealed low Maintenance Batteries, Voltage regulator, Instrument panel with RPM Indicator, Exhaust silencer (residential), protections against Low Lub.oil pressure, high water temperature.
1
-
-
... More
xiii) V notch plate (1 No) - Suitable for 35 KLD FAB
-
-
-
... More
Manufacture and supply of Cook Table of size 1800 x 900 x 750 mm made out of 100x50mm T W frame work with diagonals, 75x75mm T W legs, top to have 18mm thick polished granite slabs of approved shade etc., complete with spirit polish for wood work complete.
1
-
-
... More
40A AC1 Contactor with 230V Coil and a Time Switch- 1set
-
-
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
500
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
Subhead - VI : Marble & Granite Work
-
-
-
... More
Contactor of suitable rating -1 No
-
-
-
... More
Supply, Installation, Testing and Commissioning of CONTROL CABLING of 3C x 1.5 sq.mm. copper cable for communication between indoor and outdoor units to be suitably laid in PVC conduit as per site requirement.
2280
-
-
... More
8. Available shaft size : 2400 x 1850 mm
-
-
-
... More
Providing and fixing bolts of grade 4.6, electro plated including nuts and washers complete.
300
-
-
... More
Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 11 kV grade of following size in the existing RCC/ HUMEI METAL pipe as required.
-
-
-
... More
Supply of Back unit of size 2100 x 450 x 625mm made out of 18/12mm commercial plywood with 3.5mm thick veneer of approved shade for frame / box work, shelves, shutters,drawers and top, exposed internal surfaces finished with 0.60mm thick lamination of approved brand and shade, drawers with sliding channels, all exposed edges to have teakwood beading, top to have moulded teak wood beading, superior quality brushed steel hardware fittings, locking arrangements, P.U polish finish to top and melamine polish finish to all exposed veneer surfaces, un exposed internal surfaces shall be finished with 2 coats of enamel paint and wood primer including surface preparation etc., complete all as directed.
2
-
-
... More
Chapter XVIII : External Power Supply
-
-
-
... More
MV Panels
-
-
-
... More
For pipes 100 to 250 mm diameter
45
-
-
... More
xxi) Electricals (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
63mm dia nominal outer dia pipes.
300
-
-
... More
Outgoings :
-
-
-
... More
6Stage Automatic PF Controller Relay (Microprocessor based) with PF Meter - 1set Each Capacitor Bank shall have the following : ON/OFF Indication lamps Analog Ammeter with CTs and selector switch Auto/ Manual Selector switch with 1set of ON/OFF Push buttons for Manual Operation. All contactors shall be heavy duty type.The cubicle shall have panel mounted exhaust fans for ventilation.
-
-
-
... More
Chapter XIII :
-
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
11890
-
-
... More
Supply, laying and commissioning of following size 1.1KV grade PVC insulated flexible Copper conductor in the bore with all installation materials. The cable shall conform to IS 694
-
-
-
... More
Providing and fixing 25mm thick expansion joint filler board using Supreme Capcell-HD-100, Semi-rigid UV resistant high performance laminated closed cell polyethelene foam joint filler in sheet form complete as directed.
25
-
-
... More
With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
38
-
-
... More
3.5C x 240 Sqmm-AYFY
50
-
-
... More
4C x 1.5 sqmm (Copper)
90
-
-
... More
150 mm dia
2
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
20
-
-
... More
Supply, installation ,testing and commissioning &Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket
-
-
-
... More
63A 35KA FP MCCB with TVSS – 1no
-
-
-
... More
Add / deduct for using extra / less cement in the items of design mix over and above the specified cement content therein.
2426
-
-
... More
14. Car enclosure : SS Hair line finish
-
-
-
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
67
-
-
... More
2 x 32 A MCCB outgoing for pumps
-
-
-
... More
Supply of centre table of size 900x525x400mm with frame and legs made out of 60x35mm teak wood sections, top frame and legs polished in spirit finish, Top to have 18mm thickComl ply with 1mm thick laminateetc; complete all exposed to have TW lipping of 18 x 6mm thick with spirit polish.
6
-
-
... More
100 mm diameter pipe
60
-
-
... More
Dispensing panel : Rectangular, SS 304, size:600x800x325deepx1.2thk, to accommodate 2 bubble top bottles for filling with valves - 1 set.
-
-
-
... More
with ISI marked M.S. pressed butt hinges bright finished of required size
-
-
-
... More
Ordinary rock
11830
-
-
... More
Supply of officer Table of size 1500 x 750 x 750 mm made out of 18mm thick commercial plywood with 1mm thick lamination of approved brand and shade for frame / box work and top, exposed internal surfaces finished with 0.60mm thick lamination of approved brand and shade, drawer unit with three drawers on sliding channels, key board slide out tray of approved brand, superior quality brushed steel hardware fittings, locking arrangements, teak wood beading / lamination to all exposed edges,un exposed internal surfaces shall be finished with 2 coats of enamel paint and wood primer including surface preparation etc, complete all as directed.
5
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
2156
-
-
... More
Supply of Deep freezer for Milk storage of capacity 200 ltrs of approved make and all as per the directions of Engineer -in-charge.
1
-
-
... More
18 HP OUT DOOR UNIT
1
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level
-
-
-
... More
3C x1.5 sqmm (Copper)
155
-
-
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5km, also including ramming and watering of the earth in layers not exceeding 20cm in trenching, plinth, sides of foundation etc. complete.
15500
-
-
... More
Supply, installation, testing and commissiong of RO drinking water unit of capacity 1000 lph consisting of :
1
-
-
... More
5. Booster pump - Kemflow / BNQS / AQ& Q / ECHEN or equivalent
-
-
-
... More
3C X 185Sq.mm,11KV (E)
50
-
-
... More
Two or more coats on new work
2040
-
-
... More
63/40A 25KA FP MCCBs – 10nos
-
-
-
... More
3core 6sq.mm
12
-
-
... More
ACB release shall have individual indiaction LEDs for faults (L,S,I,G). ACB release shall be provided with built-in LCD display for following: Current measurement and display with bar graph, date & time stamping for events, last trip data & last 20 trip data. Release shall have over temp. protection. Release shall be provided with battery back-up to assist user to diagnose in the events of fault. Panel Front side Glass/Acrylic sheet to be provided for clear visibility for each section.
-
-
-
... More
Providing and fixing UPVC floor trap with 75mm dia outlet "Supreme" or other equivalent approved make, including connection with PVC soil / waste pipe, necessary 150mm thick CC 1:2:4 for embedding the trap including providing and fixing top rail and strainer on top of the trap etc. complete all as per specifications and as directed by the Engineer in-charge.
228
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
30
-
-
... More
M.S. tube
4775
-
-
... More
Providing and laying 2mm thick self levelling antistatic hard epoxy flooring of approved make and colour by preparing the surface of floor by captive shot (using lead shots) blasting followed by vacuum cleaning to receive the flooring and laying the floor having the following specifications and as per satisfaction of Engineer in charge
1340
-
-
... More
4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
4250
-
-
... More
50mm dia
500
-
-
... More
3.5C X 50 Sq.mm
1315
-
-
... More
Supply, Installation, Testing and Commissioning of POWER CABLING of Copper cable for indoor / outdoor units to be suitably laid in PVC conduit as per site requirement.
-
-
-
... More
Metering For Each Incomer :
-
-
-
... More
- Brick chamber & CI Cover complete.
-
-
-
... More
30. Emergency cabin lighting and alarm.
-
-
-
... More
Supply of Peg table of size 450x450x400mm with frame and legs made out of 60x35mm teak wood sections, top frame and legs polished in spirit finish, Top to have 18mm thickComl ply with 1mm thick laminateetc; complete all exposed to have TW lipping of 18 x 6mm thick with spirit polish.
25
-
-
... More
40A,25KA TPMCCB with suitable capacitor duty rating Contactor and 10 KVAR MPP 440V Delta connected heavy duty Capacitor Banks -3nos
-
-
-
... More
Supply, Installation, Testing and Commissioning of CONTROL CABLING of 3C x 1.5 sq.mm. copper cable for communication between indoor and outdoor units to be suitably laid in PVC conduit as per site requirement.
620
-
-
... More
Providing & fixing of Bar Counter of 600mm deep x1000mm Height made in 18mm thick MR graded plywood framework, table to have 20mm polished Granite top of approved shade, frosted glass for front screen . The desk shall have 2nos storage units made in 18mm thick plywood externally finished in 1 mm Laminate of approved shade all internal surfaces of the Counter shall be finished with 0.8 mm thick Laminate with necessary hardware fittings like drawer channels, hinges, tower bolts/ball catches and locks of apporved make. etc., complete with spirit polish and all as per drawing.
4
-
-
... More
FPB-8 (Weather proof double door outdoor type)
1
-
-
... More
2 Modular GI box and cover plate
219
-
-
... More
Providing and fixing Wall Mixer 2-in-1 of approved equivalent make system with provision for overhead shower complete with bend pipe and wall flange of approved make suitable for concealed piping.
32
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
401
-
-
... More
- 40mm dia, standard length (as per equipment supplier) electrode capsule, filled with earth enhancing compound, seald at both ends and brazed lead for connection at one end, suitable for direct installation at site, at a depth of 2.5mtrs.
-
-
-
... More
Providing and laying Double Charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Make JOHNSON (Croma flurry/ Rosso Verona or Equivalent ) KAJARIA (K-6208/6201 or Equivalent ).
SOMANY (Nuvaro Mocha/Decia grey walia or Equivalent ).
-
-
-
... More
40A,25KA TPMCCB with suitable capacitor duty rating Contactor and 10 KVAR MPP 440V Delta connected heavy duty Capacitor Banks - 1no
-
-
-
... More
Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
1
-
-
... More
8Way VTPNMCBDB with 125A, 25KA, 4Pole MCCB as incomer and 8nos 40-63A TP MCBs as outgoings.
2
-
-
... More
Supply Installation Testing and commissioning of TPN MCB Double door Distribution boards dust and vermin protected and rated for 415V Three Phase AC supply operation including incoming MCB /ELCB as per specifications and required capacity Neutral bar and Earth terminal complete as required and installed in concealed in wall after necessary chase cutting with finishing/surface in wall including all fixing materials required. MCBs shall conform to IS : 8828 and ELCB shall conform to IS :12640. All MCBs shall be 'C' Curve. DBs shall be provided along with required wire adopter boxes around the DB as required and dummies for spare ways in the DB (No claim shall be allowed for the same).
-
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches-1set
-
-
-
... More
Flanged Socket
-
-
-
... More
Supply, installation, testing and commissioning of 8 Way Wago/ Phonix terminal connector in weather proof MS Junctionbox including painting and all installation materials etc as required.
8
-
-
... More
xi) Air grid for sludge holding tank (1 Lot) - Suitable for 35 KLD FAB
-
-
-
... More
- Ground enhanced material (GEM) upto a depth of 2.5meters arround the electrode capsule.
-
-
-
... More
Supply, installation, Testing and commissioning of following 11KV/0.433KV Dyn outdoor ONAN Oil cooled double Copper wound Distribution Transformer with on load Tap changer with AVR and Remote tap changer Control panel, including first filling of Oil and Losses as per 1180 Level-II and as per detailed Technical Specifications.
-
-
-
... More
Supply, Installation, Testing and Commissioning of Extruded Al. Powder coated continous Grill / Discrete grills for Return air as per the specifications and approved drawings. (Colour to match the false ceiling as per the Client/ Consultant approval)
5
-
-
... More
3.5C X 95 Sq.mm
8615
-
-
... More
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured).
-
-
-
... More
3.5C X 185 Sq.mm Straight Through joints
1
-
-
... More
100KVA
1
-
-
... More
3.5C x 150 sqmm (Aluminum)
8
-
-
... More
Supply, fabricating and erecting secondary members like purlins etc., made of C and Z sections of material GI with available thickness 1.6mm, 1.8mm, 2.0mm, 2.5mm of grade 50 (345 MPa) and galvanised for not less than 275 GSM etc., all complete
10
-
-
... More
Supply, testing and commissioning of following size 1.1KV grade XLPE insulated armoured aluminium/Copper conductor cable.The cable shall conform to IS 7098/ Part I.
-
-
-
... More
40A AC1 Contactor with 230V Coil and a Time Switch- 1set
-
-
-
... More
Chapter XXIV-Rain Water Harvesting Pit
-
-
-
... More
Fabrication,Supply,testing and commissioning coupler of DI to MS of 150mm dia / or directed by engineer incharge with all required accessories etc. complete
1
-
-
... More
Refrigerant pipe joints
-
-
-
... More
All socketed 22.5deg. bend
-
-
-
... More
25mm dia
5000
-
-
... More
Laying of one number PVC insulated and PVC sheathed I XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.
-
-
-
... More
Supply of Safe for Meat storage of capacity 320 ltrs of approved make and all as per the directions of Engineer -in-charge.
1
-
-
... More
HI-WALL SPLIT UNIT (INVERTER TYPE):
-
-
-
... More
Providing and fixing CP towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality.
33
-
-
... More
Supply and fixing of Key box of size 750 x 1200 x 100mm made out of 18 mm thick plywood with 1mm laminate and 5mm thick glass shutter, including hard ware fittings, locking arrangement for the glass shutter and providing 30 Nos of SS hooks to hold the keys inside the cabinet etc., all complete as directed by Engineer-in-charge.
2
-
-
... More
LIGHTS: Clean room compatiable Light fittings with CFL/ LED (Eqv) (3 X 36 W) with opal accrylic cover.
35
-
-
... More
Supply, Installation, Testing and Commissioning of factory fabricated GSS Ducting as per SMACNA/DW standards with splitters,bends, elbows, vanes, supports,neoprene of minimum 6mm thick gasket, nuts, bolts angle iron flanges, soildered longitudinal joints ,GI full threaded rods hung to minimum 12 mm dia HILTI make anchor fastner as required and epoxy painted slotted rail supports ,as per the specifications and approved drawings.
-
-
-
... More
Voltmeter, Ammeters, Indication lamps shall be provided as required.
-
-
-
... More
Subhead - XIII : Water Supply
-
-
-
... More
Activated Carbon Filter FRP Dia.16" x 65" ht, 10 bar rating with top opening, make : Pentair, with 1"multi port valve, initial charge of carbon to mesh 8x16, IV 600, -1 Set, make : Pentair,
-
-
-
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
... More
Suppy of work bench of size 1800x900x750mm made out of teakwood framework of size 60x60mm thick, and top to have 25mm thick plywood with 1m thick lamination on top and 2 shelfs and having 3 drawers and footrest with 50x30mm teakwood section, 2 shelfs on top of the table, made out of 18mm thick plywood with lamination and providing 2 nos of 5/15 Amps power socket etc. complete with spirit polish and all as per drawing.
2
-
-
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
600
-
-
... More
Supply of Steel revolving stool with cushioned seat adjustable height from 450mm to 650mm The legs are to be fitted with high quality PVC shoes with nylon reinforcements etc.,complete all as per Model no FUHCACSSHTRVSTOL of godrej make or eqivalents of Wipro/Featherlite/Durian/Ikea.
1
-
-
... More
63/40A 25KA FP MCCBs – 9nos
-
-
-
... More
Outgoings :
-
-
-
... More
Incoming : 160A, 35KA 4Pole MCCB -1set
-
-
-
... More
Ø 50 mm
1
-
-
... More
16. Landing Door : SS Hairline Finish
-
-
-
... More
65A AC1 Contactor with 230V Coil and a Time Switch-1set
-
-
-
... More
Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)
6
-
-
... More
ON/OFF/TRIP LED indication Lams -1 Set
-
-
-
... More
Laying of one number PVC insulated and PVC sheathed XLPE power cable of 11 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
Earthing
-
-
-
... More
Earthing
-
-
-
... More
Trees for 250 no/(up to 4 & up to 3 year Slow & Fast growing Per tree group)
2000
-
-
... More
3C x 2.5 Sqmm Copper
50
-
-
... More
3.5C X 95 Sq.mm Straight Through joints
6
-
-
... More
Credit for hardrock obtained at item no 2b) above (fixed rate of Rs. 200/- per cum)
8120
-
-
... More
Supply and stacking of plant Ficus panda of height 30-45 cm. with 3-4 branches and healthy foliage in p.bag of size 20 cm as per direction of the officer-in-charge.
1000
-
-
... More
Ø 9.5 mm
20
-
-
... More
150 NB
750
-
-
... More
Supply of Peigeon hole locker of size 1500mm x 300mm x 1980mm of 30 shelves of each of size 300mm x 300 mm, top, bottom, doors sides, back & shelves with 22 gauge of M.S. Sheet having with duplicate keys and finished with two or more oats of enamel paint of approved shade etc., complete all as per Godrej make or equivalent.
1
-
-
... More
Supply, installation ,testing and commissioning &Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :
-
-
-
... More
i) Trees Plant
2300
-
-
... More
The PCC shall have at least two spare cubicles. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on U channels including supply and fixing of the same. Every ACB shall be provided with ON/OFF /Trip Indication lamps of LED type. For all Electrically operated Breakers, Local Remote Selector switches shall be provided for controlling the Breakers remotely.ACB's shall have built-in All ACBs shall be provided with Digital type Ammeter of suitable range along with CTs. All ACBs shall be provided with ON/OFF/TRIP indication lamps and shunt trip coils. All MCCB/ACBs of rating 160A and above shall be with Micro processor releases All MCCBs below 160A shall be with adjustable thermal magnetic based releases. All MCCBs shall be with spreader links and rotary handle. All MCCBs shall be over load & short circuit releases with Icu=100% Ics. All CTs/CBCT shall be resin cast type. All Controlling wiring shall be FRLS cables, all the bus bar sleeves shall be Heat shrinkable kits. Panels shall have form 4b/form 3b construction as per the requirement. ACBs shall conform to IEC 60947 (part 1&2), shall be suitable for rated system voltage 690V, Insulation voltage 1000V and Impulse withstand of 12KV. In case of 4 pole ACB, neutral rating shall be 100% of phase.ACBs shall have same height & depth for entire range irrespective of frame size. ACBs shall have Icu=Ics=Icw (Icw rating shall be for 1 sec). ACB's shall have ready to close contact.
-
-
-
... More
200x10 mm
351
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
-
-
-
... More
vi) Motors for Air Blowers (2 Nos- 1 W+ 1 S) - Suitable for 35 KLD FAB
-
-
-
... More
Anti Static Epoxy Flooring
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
2528
-
-
... More
Transit officer
1
-
-
... More
500 mm X 54 mm
20
-
-
... More
Extra for pre finished nosing to treads of steps of marble stone.
60
-
-
... More
1. Type and capacity : Goods lift 1000 kgs
-
-
-
... More
DOUBLE ACTING AIR RELIEF VALVE
-
-
-
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
2515
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
3.5C X 35 Sq.mm - Copper
1685
-
-
... More
50 X 5mm Copper strip with sleeve
-
-
-
... More
Providing and fixing Heavy duty floor spring & locks of Dorma model no BTS 75 V or approved equivalent, with necessry spindle cover plates, top patch, bottom patch and corner lock as specifications
10
-
-
... More
Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
termination of the control cable from AMF panel.
-
-
-
... More
150 NB
50
-
-
... More
0-400A Digital Ammeter with CTs of ratio 200-400/5A, Class 1 Accuracy and 15VA burden and selector switch -1set
-
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
17
-
-
... More
Ø 32 mm
10
-
-
... More
Providing and laying Ceramic glazed or antiskid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete Make JOHNSON ( Croma flurry/ Rosso Verona or Equivalent ) KAJARIA (K-6208/6201 or Equivalent ).
SOMANY ( Nuvaro Mocha/Decia grey walia or Equivalent ).
695
-
-
... More
Supply of bed side table of size 600x450x450mm made out of 18mm thick ply one drawer and one closed shelf including providing 1mm thick lamination on sides, bottom, drawers, and top including teak wood beading on all exposed edges etc and hardware fittings like handles and locking arrangement complete with spirit polish, as per drawing
16
-
-
... More
Supply, Installation, Testing and Commissioning of 63A 3 phase 5 pin socket with 63A 4 pole MCB with an enclosed compartment and SS cover plate for clean room compatable.
2
-
-
... More
4Core 16 sq.mm
220
-
-
... More
Supply, testing and commissioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor cable.The cable shall conform to IS 7098/ Part I.
-
-
-
... More
Supply, testing & commisioning of following size 1.1KV grade XLPE insulated armoured aluminium conductor cable.The cable shall conform to IS 7098/ Part I.
-
-
-
... More
18W (4Feet) LED Light Fixture ( Bajaj/Philips/Crompton/Wipro similar Bajaj : BCLSB 18WH)
197
-
-
... More
LED Phase indication lamps with individuals Fuses and control with toggle switches- 1 set
-
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
... More
Hard rock (requiring blasting)
937
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
18500
-
-
... More
Ø 40 mm
25
-
-
... More
Busbars : 250A TPN Aluminium Busbars with 100% Neutral-1set
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements