Archaeological Survey Of India Tender

Item No.4: Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead The rate is inclusive of all materials & labour involved except scaffolding, Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No. 5: Provision for cost, supply and fixing of Sanitary & Plumbing items including cost, conveyance of all materials, labour charges, laying and fixing in position charges etc. Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

a. fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

b. Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

c. Water taps any reputed ISI made etc

d. Long hand taps for wash basins

e. PVC long hand tap

f. PVC pipes of dia 110mm of Type A for use in WC and bath rooms drainage to septic tank for soil, waste and ventilation system shall be used. The pipes shall be supplied in nominal length of 20 feet

g. PVC pipes of dia 75mm of Type A for use in WC and bath rooms drainage to septic tank for soil, waste and ventilation system shall be used. The pipes shall be supplied in nominal length of 4

h. PVC bends pipes of dia 110mm of Type A for use in WC and bath rooms drainage to septic tank for soil, waste and ventilation system shall be used

i. Providing and fixing 600x450 mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

j. Towel ring

k. Towel rail

l. Floor trap frame and grating

m. 15 mm CP health faucet with 1.0m long flexible tube with end nuts & Hook

n. Miscellaneous items like threads, gum, nuts and bolts if needs for sanitary fittings etc.

o. Labour charges for fixing the above said items including excavation of trenches, laying pipes, plumbing work, filling trenches with excavated earth etc. complete ( As per the sub item c to o)

p. Electric water heater of IS mark 15L

Item No.6: Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : 18.32.1 With common burnt clay F.P.S.(non modular) bricks Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.7: Provision for water supply items like providing water pipe lines, fixing in position etc. Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

a. uPVC pipe of 3/4" dia with 20' length

b. uPVC pipe of 1" dia with 20' length

c. elbow 1" dia

d. T section 1" dia

e. Nipple 1” dia

f. 3/4" bend

g. 3/4" elbow

h. elbow 3/4" to 1/2"

i. T section 3/4" to 1/2" dia

j. cPVC hot water pipe 3/4" of 10' length

k. cPVC elbow plain 3/4"

l. brass elbow 3/4" to 1/2"

m. 1 1/2" PVC pipe, 10' length

n. 1 1/2" elbow

o. MCB switch 16amp

p. MCB switch 10amp

q. switches 10amp

r. switches 20amp

s. GI switches 12module

t. GI switch 8 module

u. GI switch 6 module

v. GI switch 2 module

w. 3pin socket 10amp

x. 3pin socket 20amp

y. LED tube lights

Item No.8: Provision for repair/replacement of damaged electrification system in the staff quarters Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge..

a. 1" dia pvc pipe, 20' length

b. pvc bend 1" dia

c. GI 12 modular boards

d. GI 8 modular boards

e. GI 6 modular boards

f. GI 4 modular boards

g. GI 2 modular boards

h. 2.5 sqmm approved quality pvc insulated wire

i. 1.00 sqmm approved quality pvc insulated wire

j. 4.00 sqmm approved quality pvc insulated wire

k. Ceiling rose

l. Cross holders

m. Mcb box 8 module

n. Isolation 40v

o. Mcb switch 20amp

Item No.09 Provision for Cleaning the wall surfaces and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by the Competent Authority, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet where ever required, without causing any scratching/ damage to the wall surfaces and finally washing the surface with clean water, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineer-in-charge (The rate is inclusive of all materials & labour involved except scaffolding)and Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 cement: 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) inclusive of all materials & labour involved except scaffolding, also Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge

Item No.11 Providing Mild Steel Safety Grills (fixed) of outer frame size 40x40x6mm equal angles with hold fast to be embedded in cc, grill design of 12 mm square bar @20cm c/c vertically welded with outer frame, rubbing, cleaning the frame for primer coat and two or more coat synthetic enamel paint of approved colour till to get good finishing, fitting and fixing mosquito net (steel wire net) with suitable powder coated Aluminum section to the inner side of the grill all around , drilling, fixing with rawl plug. With necessary fixtures etc. complete and to fix it over the rear side compound wall of the quarters. complete item of work as directed Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.12 Supply, fitting, fixing and providing powder coated sheets of thickness not less than 0.25mm, 12 feet length for the roof of closed rear side court yard of quarter in the lower fort, Chandragiri with truss frame. GI Hallow pipes of size 50x50x2 mm vertical pole 6 nos, 2.80m height, purlins 30x30x2mm 7 nos, 8.50m batten 30x30x2mm 3 nos 7.30m, laying powder coated sheets of 12 feet length 45m2 fitting, fixing, with screws/bolts, hoisting, cleaning, the metal surface and applying one coat of primer red oxide/ zinc chromite primer, two or more coat synthetic enamel paint of approved colour till to get good finishing Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.13 Provision for providing and fixing of teak wood door of size 0.90x1.80m with size of the frame 3”x4”, and 35 to 40mm thick flank for doors including cost, conveyance of all materials, cutting in to required sizes, dressing charges, finishing etc., labour charges, fixing in position with hold fast lugs or with dash fasteners of required dia & length, Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.14 Providing and laying Vitrified tiles (size1000x1000mm) in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.15 Provision for providing dadoing in the toilet of Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished), Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.16 Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.17 Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in- Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.18 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction including cost, conveyance of all materials, cutting in to required sizes, dressing charges, finishing etc., labour charges, fixing in position with hold fast lugs or with dash fasteners of required dia & length, Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.19 Providing and fixing of 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter to existing door frames made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanized M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanized M.S. 'U' cleats. The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm, having over all thickness of (For W.C. and bathroom door shutter). Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.20 Providing painting to the doors and windows of two over a one base coats of wood preservative etc including cost, conveyance of all materials, labour charges, finishing etc., and also Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.

Item No.21 Providing and placing on terrace (2000 LTR capacity) polyethylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work. Including cost, conveyance of materials, loading, transportation, unloading, labour, seigniorage charges, GST and other applicable taxes etc. complete item of the work as directed by Site in charge.