Andhra University Tender

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Ceiling fan 56? sweep ?Crompton? High Speed chocolate brown complete with blades, down rod etc, with double ball bearings etc.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Ceiling fan regulator modular electronics with 5 steps fixed on modular plate.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Wall mounted fan 16? sweep with oscillation ?Crompton?

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Exhaust fan 12? sweep Crompton with blades to be fixed in ventilator or wall with necessary masionary work. .

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Socket out let 2 pin/3pin 5 Amps 3Nos with 3 Nos switches fixed on modular plate of required size

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Socket out let 3pin 5/15 amps controlled by separate 15 Amps switch fixed on modular plate of required size.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;ICTPN switch fuse 125Amps 500V with HRC fuses to be fixed on the iron channels. (L&T/ABB/C&S)

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Bus bar chamber 3 phase 100A with 4 Nos. copper bus bars fixing on the iron channels.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;MCB DB double door TPN 4 way with TPN 100Amps isolator as Incomer and 12 Nos. 15- 30A SP MCBs as outgoing. (Legrand(Ekinox 3)/ L&T-Newrange / Indo Asian-Opti Pro)

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;MCB DB DD SPN 12 way with 60 ADP Isolator and 10 Nos 5-15Amps SP MCBs(Legrand(Ekinox 3)/ L&T-Newrange / Indo Asian-Opti Pro)

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Earth pipe of GI pipe 40mm dia 3 Mts, long with 6x600x600mm GI plate, Chemical powder etc, connected with 25x3mm GI flat.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Run of GI flat 25x3 and connection to main switch and distribution boards.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Light and wall mounted fan points with 2 Nos.1 sq.mm copper wires.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Ceiling fan points with 3 Nos. 1 sq.mm copper wires including earth.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Socket out let points including providing of3 pin 5A socket out let and switch with3 Nos. 1 sq.mm copper wires.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Connection to 15A sockets and computer sockets with 2 Nos. 2.5 sq.mm and 1 No. 1 sq.mm copper wires connected from DB.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Run of 4 Nos.16 sq.mm and 1 No. 4 sq.mm copper wires.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Run of 2 Nos.10 sq.mm and 1 No. 4 sq.mm copper wires.

Internal Electrification of MBA Annexure BuildingG plus 2 South Campus,AU;Supply, installation, testing & commissioning of 3 phase 415V 4 wire Free Standing Floor mounted MV panel made out of 14 SWG CRCA sheet and Painting with Epoxy powder coating after seven tank process surface preparation. The panel shall consist of suitable rating TPN Aluminium busbar at the rating of 0.8/Sq.mm) supported with DMC/SMC barriers and colour coded with Heatshrinkable sleeves. The Metering shall be providedas specified. he panel shall have Short circuit with standing capacity of minimum 50KA and consist of the switchgear as mentioned below: The panel shall be got fabricated from manufacturers with CPRI Test certificate only.The PCC shall have atleast two spare cubicles of the maximum rating. All feeders shall be earthed with 2 G.I.flats of adequate size to the main earth bus of 50x6mm GI flat. The size of all Panel Mounting Meters shall be 96X96mm. The Panels shall be mounted on MS channels including supply and fixing of the same [MAKES: SCHNEIDER/L&T]Incomer1 : 400A, 50KA 4 Pole Manually operated draw out type SDFU with Electronic releases for Overload and Short Circuit- 1setChange Over: 400 amps 4 Pole Change over Switch Busbars : 800A TPN Aluminium Busbars- 1set Outgoings : 125A TPN SF Units ? 3 Nos 63A TPN SF Units - 2 Nos 32A TPN SF Units - 2 Nos Metering For Incomer Feeders : 0-500V Digital Voltmeter with Ph.selector switch and 3P MCB. 0-600A Digital Ammeter with resin cast CTs of ratio 600/5A, Class 1 Accuracy and 15VA burden and Ph.selector switch . LED Phase indication lamps with individuals MCB Protection. CT operated Multi Function meters with required resin cast CTs. Digital 3-Phase Energy Meter with CT?s.