Andhra Pradesh Urban Greening And Beautification Corporation Limited Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Urban Greening And Beautification Corporation Limited - APUGBCL Tender
Civil And Construction
Civil Works
Opening Date27 Oct 2021
Closing Date10 Nov 2021
Tender Amount₹ 27,70,61,983
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
452139Bid Award Id
ViewTender No
15021/16/2021-TECH SEC-APUGBC/2021-22/2(1)Tender Authority
Andhra Pradesh Urban Greening And Beautification Corporation Limited ViewPurchaser Address
-Website
http://http://urbangreening.ap.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling with Murram in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.
3840.05
3029914
789.03
Filling with Coarse Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.
227.73
146489
643.26
Pre construction Anti termite is a process in which chemical toxic to subterrean termites is apply/ inject into soil during early stage of building Construction
2. Treatement of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry
3. Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the colums , plinth beams (Back filling) walls and floor junction, external perimeters, along reatining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around coulmns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for sparying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge.
12688.3
2162340
170.42
Plain Cement concrete (1:4:8) using 40mm metal with Machine mixing including cost and conveyance of all materials, labour charges for laying vibrating curing etc., upto plinth level.
1200.18
4777292
3980.48
Plain Cement concrete Grade M10 - Nominal Mix using 20mm metal with Machine mixing including cost and conveyance of all materials, labour charges, centering charges and curing etc.,
2.86
14756
5159.78
Supply and placing of the M25 grade Design Mix Concrete corresponding to IS 456 using Batching plant at 20 cum per hour, Transit mixer 4cum capacity for lead upto 1km and Concrete Pump with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work
-
-
-
for footings
925.47
6306337
6814.2
for pedestals
273.78
2023883
7392.37
for plinth beams
347.4
3261988
9389.72
for columns
527.07
5882644
11161.03
for first floor columns
15.92
179186
11255.42
for sun shades 100 mm thick
284.31
312456
1099
for roof beams
145.72
1440554
9885.77
for first floor roof beams
11.91
118057
9912.44
for slab 150 mm thick
277
2415254
8719.33
for first floor slab 150 mm thick
32.31
282159
8732.89
For Bridge slab 175mm thick
49.39
407184
8244.28
for sils & lintels
30.33
340052
11211.76
Plain Cement concrete Grade M20 - Nominal Mix using 20mm metal with hand mixing including cost and conveyance of all materials, labour charges for laying vibrating curing etc., upto plinth level. For Strom Water Drains
67.5
368559
5460.14
Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)
-
-
-
Ground floor
298.76
24483122
81949.13
First floor
6.85
569503
83139.13
CR stone masonry in 2nd sort in CM (1:6) prop: (cement : sand) using hard granite stones from approved quarry including cost and conveyance of all materials like cement, sand water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape, mixing of cement, mortar, construction, scaffolding charges, curing etc., and overheads & contractors profit, complete for finished item of work in foundation & basement. (APSS No. 615 & 601)
1086.52
4996536
4598.66
Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls.
-
-
-
Ground floor
779.3
4822931
6188.8
First Floor
34.52
240114
6955.82
Ornamental ceiling plastering 12mm thick using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
-
-
-
Ground floor
1521.1
683780
449.53
First Floor
130.29
65874
505.6
Plastering 12mm thick for internal walls using screened sand with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
-
-
-
Ground floor
5245.28
2357910
449.53
First Floor
142.54
70213
492.59
Plastering with CM 2 coats for external wall, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)
-
-
-
Ground floor
2878.41
1329480
461.88
First Floor
675.02
340837
504.93
Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work.
-
-
-
Ground floor
2489.59
1232272
494.97
First Floor
102.72
53932
525.04
Flooring with Polished black Kadapa slabs of all sizes between 25 - 30 mm thickness, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, .
-
-
-
Ground floor
1090.17
738437
677.36
First floor
243.18
172879
710.91
Providing skirting to internal walls to 15 cm height/risers of steps with Polished black Kadapa slabs of all sizes between 25 - 30 mm thickness length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work,
143.8
98714
686.47
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701)
170.97
158478
926.94
Dadooing to walls withglazed red or white full body ceramic wall tiles of Size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:3) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement, overheads & contractors profit etc., to site, all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.
351.54
231436
658.35
Flooring with Shahabad /Tandur Rough Stone slabs of minimum of 25 mm thick, set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including seigniorage charges, labour charges for dressing of flooring stones etc., complete for finished item of work, .
746.37
451606
605.07
Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same and over heads &contractor profit etc.
1356.73
675149
497.63
Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade set over a water based Cement Primer of Interior Grade- 1 after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls
7009.33
1166773
166.46
Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - excluding cost of access scaffolding.
3553.44
1293807
364.1
Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 2 Coats.
3553.44
599074
168.59
Supplying and fixing SINGLE SHUTTER DOOR using Sal Wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters with solid bond wood block board type with commercial ply on both faces.:35 mm thick conforming to IS:2202 as per drawing including cost of Aluminium fixtures such as 3 Nos. Butt hinges 150mm long, 1 No tower bolt of 200x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-250mm long, 2 Nos. handles of 150 mm size including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 0.9m X2.1m)
85.68
411895
4807.37
Supplying and fixing DOUBLE SHUTTER DOOR using Sal Wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters with solid bond wood block board type with commercial ply on both faces.:35 mm thick conforming to IS:2202 as per drawing including cost of Aluminium fixtures such as 6 Nos. Butt hinges 150mm long, 2 No tower bolt of 200x10mm dia, 1 No. Aldrops - 300 mm long, 1No. Latche-250mm long, 4 Nos. handles of 150 mm size including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.2 X2.1m)
12.6
58984
4681.32
Providing and fixing factory made uPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm).
5.4
49437
9155.1
Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.
Ventilators: Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box section) outer frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm
14.04
68687
4892.26
Providing and fixing factory made uPVC white colour casement/casementcum fixedglazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size forfixing frame to finished wall, plastic packers, plastic caps and necessarystainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealant .
Casement window double panels with top fixed with S.S. frictionhinges (350 x 19 x 1.9 mm) made of (small series) frame47 x 50mm, sash 47 x 68 mm & mullion 47 x 68 mm allhaving wall thickness of 1.9 ± 0.2 mm and single glazing beadofappropriate dimension. ( Area of window upto 2.50 sqm).
15.72
112216
7138.43
Manufacture,supply,delivery and fixing of Structural steel work for windows grills like MS Flat, MS Square Bars etc, made with MS Structural Steel, i.e. Angles, Channels & I Sections etc including welding , finishing etc complete unit 1.00 kgs.
46743.6
4960898
106.13
Painting with Red Oxide Primer Paint - one coat and Synthetic Enamel Paints -Two coats -for new Iron work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.
3445.63
612701
177.82
Painting with Wood Primer - one coat and Synthetic Enamel Paints -Two coats -for new Wood work to given an even shade after throughly brushing the surface to remove all dirt and remains of losse powdered materials, including cost and conveyance of all materials to work site and all operational incidental labour charges etc., complete for finished item of work.
196.56
37147
188.99
Providing and fixing of HPL Sheets 12mm thick of approved design with all Door Acessories , including all necessary fixing arrangement complete as per specification.
108.7
573849
5279.2
Supplying and Fixing of Dome Ornementation with GRC Material including material and labour charges etc.
77.48
400317
5166.72
Flush Pointing with CM (1:3) to Brick / CRS Masonry including cost and conveyance of all materials like cement, sand, water etc., to site, labour charges, like mixing cement mortar, overheads and contractors profit etc., complete for finished item of work.
3162.49
296167
93.65
Reinforced Masonry for partition walls (100 mm thick) in CM (1:6) prop. (Cement : Screened sand) using fly ash cement / lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, and cost of overheads & contractors profit etc., but excluding cost of steel and its fabrication charges complete for finished item of work.
-
-
-
Ground floor
1040.87
654873
629.16
First floor
39.82
30879
775.48
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
330.12
1312732
3976.53
Supplying and Fixing Tensile Roofing with Frame work
Scope of work :
This work includes raw material, Design & Calculation, supply, Fabrication and installation with High Tensioned Nut & Bolts. including lifts up to all heights, tools, plates and necessary hardware etc. Material of structural steel members:
All steel members will be CHS confirming to IS 1161 / 1239 / 4239 of min 240 YST. Built up members will be made from plates marked with IS2062. Yst 240/350 as per design with Duco paint. All nut bolts will be 4.8/8.8 gr. z
Transprent Material : 16mm Acrylic Sheet for
Skylight, FR Retardent,
Roofing Material:
Tensile fabric 950 GSM Type II.
Make of structural steel members:
ERW Pipes : JINDAL / BHUSHAN/TTT/AVON/HITECH/ APOLLO all ISI mark MS Plates: SAIL/UKRAINE/ESSAR. Structural members coating treatment. Steel surface preparation Paint.
1227.96
5947992
4843.8
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand, water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707)
280.31
1046498
3733.36
Supply, Laying and Fixing of precast concrete blocks (GRASS PAVERS) for paving of M-20 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over a base coat of 50mm thk sand bed including cost and conveyance of all materials like sand, water tiles etc.,to site, labour charges for loading & unloading, laying to desired lines and levels complete and Overheads & Contractor Profit etc. for finished item of work.
6242.49
4880503
781.82
Supply, Laying and Fixing of precast concrete blocks (GRASS PAVERS) for paving of M- 40 grade and thickness not less than 80 mm for Medium traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over a base coat of 50mm thk sand bed including cost and conveyance of all materials like sand, water tiles etc.,to site, labour charges for loading & unloading, laying to desired lines and levels complete and Overheads & Contractor Profit etc. for finished item of work.
12100
12218822
1009.82
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Single leaf Door
6.3
66910
10620.73
Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6” Tower bolt – 2 Nos., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 6 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Double leaf Door
31.92
361607
11328.55
Manufacture,supply,delivery and fixing of all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders using like MS Hallow sections etc, made with MS Structural Steel, i.e. Angles, Channels & I Sections etc including welding , finishing etc complete unit 1.00 kgs.
72366.89
9033558
124.83
Roofing with UV resistant multi -wall polycarbonate sheets for roofing of any colour -10 mm thick fixed with G.I ‘J’ bolts & nuts 8 mm dia with bitumen & G.I limpet washers filled with white lead & including material and Labour Charges etc.
661
1175535
1778.42
Supplying and Fixing HDPE Mesh grade of Nylon -40 including amterial and labour charges etc.
595.67
32761
55
Supplying and Installation of Foam Geyser Fountain System at Butterfly Water Fountain :
1. Supply & Installation of Foam Geyser Fountain - 1.50" Foam Geyser Nozzle with 12VDC 18W Warm White LED Underwater SS304 IP68 Lamp - 4Sets and ABS BRUSHLESS Fountain Pump 420W 15000LPH - 2nos. Including Plumbing Line & Electrical Works (Underwater Cables HO7RN-F rated Cabling & Underwater Joining Kits)
2. Supply of Filtration System – EMAUX USA including Sand Filter, Pump, PVC Fittings.
3. Supply of Control panel with MCB / ELCB, Power Supply and Timer Control.
4. Project Management, Onsite Material Transport / Travel
4
1183152
295788
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCCM20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408 MORTH
16241.4
8326316
512.66
Providing and fixing factory made uPVC white colour casement/Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDMgasket,zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent .
Casement door with top hung ventilator with 3D and S.S. frictionhinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of doorupto 2.50 sqm).
19.2
183129
9537.98
Providing and fixing Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72 mm and the glass holding section made of 304 grade stainless steel of 0.58 mm thick galvanised steel section as stiffeners inside the colour coated steel powder coated sections as per the design requirement & calculations to suit wind pressures as given in IS: 875, the primer coat with epoxy primer of 5 – 7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick and the vertical section of 50 mm x 99 mm x 0.72 mm, 33 mm x 56 mm x 0.72 mm for frame horizontal section, stiffener section of 47 mm x 97 mm x 1 mm, cover profiles sections of 20 mm x 58 mm x 0.58 mm, glass holding section of 37 mm x 37 mm & 37 mm x 18 mm including fixing 5mm thick Ocean Blue reflective glass, brackets made of CRCA powder coated/Electroplated to connect vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site requirement and gasket made of Ethyl Propylene Diamine Monomer, U.V. resistant silicon sealant including fixing in concrete/masonry wall with self-expanding cap & screws inclusive of cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and fixing charges complete for finished item of work.
2155.64
16225480
7526.99
Supplying and fixing aluminium composite cladding with skin material 0.25 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding - 4 mm thk
355.04
962864
2711.99
Supplying and Fixing of 25mm thk WPC Deck Flooring with Suppports of Rafters including material and labour charges etc.
972.03
5231465
5382
Supplying and fixing G.I. Chain link fabric fencing of required width in mesh size 76x76 mm opening of 4 mm dia GI wire including strengthening with 2 mm dia wire or nuts, bolts and washers/welding in the MS angle frame/ RCC fencing posts as required complete as per the direction of Engineer-in-charge and including cost of all materials to site, incidental operational and all labour charges overheads & contractors profit etc., complete for finished item of work
1783.91
1203960
674.9
Supplying and Installation of Bio Dome Tensile Membrane Structure
Scope of work :
This work includes raw material, Design & Calculation, supply, Fabrication and installation with High Tensioned Nut & Bolts. including lifts up to all heights, tools, plates and necessary hardware etc. Material of structural steel members:
All steel members will be CHS confirming to IS 1161 / 1239 / 4239 of min 240 YST. Built up members will be made from plates marked with IS2062. Yst 240/350 as per design with Duco paint. All nut bolts will be 4.8/8.8 gr. z
Transprent Material : 16mm Acrylic Sheet for
Skylight, FR Retardent,
Roofing Material:
Tensile fabric 950 GSM Type II.
Make of structural steel members:
ERW Pipes : JINDAL / BHUSHAN/TTT/AVON/HITECH/ APOLLO all ISI mark MS Plates: SAIL/UKRAINE/ESSAR. Structural members coating treatment. Steel surface preparation Paint.
3863.62
21001942
5435.82
Supplying and Installation of Artificial Artistic Mountain Rock Water Fall Fountain System at Nagara Vanam - Bio Dome:
1. Artificial Artistic RCC Mountain / Rock Construction Works including Structural Column / Pillars / Piers / Abutments/ Posts / Struts. Size: 7mtr Ht, 12mtr Wide as per Drawing. Scope Includes Waterproofing, Pump Room, Black Glass Swimming Pool Tiling on the Front Tank Exclusion: Ground Structural Main Pillar Preparation.
2. Supply of Water Fall Pumping System with balanced multi outlets and Integrating with digitally controlled PLC System - 15HP - 4 Pump (including Standby - ISI Brand) – 5HP - 4 Pump (including Standby - ISI Brand).
3. Supply of Filtration System – EMAUX USA including Sand Filter, Pump, UPVC Fittings & integrating with PLC System.
4. Supply of Lighting System 12 / 24 VDC 18W WARMWHITE Lights IP68 SS304 Body - 40nos, Cables - Underwater HO7RN-F rated Cabling & Underwater Joining Kits.
5. Supply of Control panel with Controller Panel, Show Software Programming, MCB / ELCB Panel.
6. Supply Fountain Nozzle System - Brass / SS Nozzles for Waterfall and Bubbler Nozzles on borders 14 nos, Valves & Fittings, UPVC Plumbing Distribution.
7. Project Management, Onsite Material Transport, Travel, Accommodation & Installation.
1
10666072
10666072
Cement concrete pavement : Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying , wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of construction joints, applying debonding strips and construction joints, curing of concrete slabs for 14-days and water finishing to lines and vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge including pannel shuttering & labour charges as per drawing and Technical Specification Clause 1501 of MORD
264.4
1467351
5549.74
Providing and fixing factory made uPVC white colour casement/Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDM gasket,zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi point lockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners 100 x 8 mm size for fixing frame to finished wall and necessarystainlesssteel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent .
Casement door with 3D hinges made of (big series) frame 67x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).
21
196050
9335.74
Supplying and Installation of Multi Propose Tensile Membrane Structure
Scope of work :
This work includes raw material, Design & Calculation, supply, Fabrication and installation with High Tensioned Nut & Bolts. including lifts up to all heights, tools, plates and necessary hardware etc. Material of structural steel members:
All steel members will be CHS confirming to IS 1161 / 1239 / 4239 of min 240 YST. Built up members will be made from plates marked with IS2062. Yst 240/350 as per design with Duco paint. All nut bolts will be 4.8/8.8 gr. z
Roofing Material:
Tensile fabric 950 GSM Type II.
Make of structural steel members:
ERW Pipes : JINDAL / BHUSHAN/TTT/AVON/HITECH/ APOLLO all ISI mark MS Plates: SAIL/UKRAINE/ESSAR. Structural members coating treatment. Steel surface preparation Paint.
3621.89
19687942
5435.82
Supplying and Fixing of Vertical Garden of Frame work using Structural Steel with painting work(3 coats - 1 coat is Redoxide & 2 coats is enamel paint) including material and labour charges etc.
10500
1785000
170
Suppying and Fixing of FRP Planters fixing with iron hooks of vertical garden structure including material and labour charges etc.
6
420000
70000
Plain Cement concrete Grade M20 - Nominal Mix using 20mm metal with hand mixing including cost and conveyance of all materials, labour charges for laying vibrating curing etc., upto plinth level.
20.72
113134
5460.14
Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc., complete for finished item of work in foundation and basement. (APSS No. 601 & 615).
403.27
1738472
4310.94
Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement, pigments of size 400 x 400 mm and thickness 25 mm of any shades set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, complete for finished item of work, .
328.56
277396
844.28
Providing skirting to internal walls to 15 cm height/risers of steps with 8 mm thick mirror polished granite tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work.
12.6
22688
1800.7
Supply of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over the 50 mm thick sand bed with hand roller compaction with joint neatly in homogeneous or heterogeneous pattern as the colour and pattern shall be as per the drawings furnished by the architect, including cost and conveyance of all materials like cement, sand, water, tiles, etc., to site including all operational, incidental, labour charges, laying tiles to required slope as directed by the Engineer- in-charge etc., and overheads & contractors profit complete for finished item of work
356
230655
647.91
Supply and fixing of C.C. Kerb not less than M30 strength of size 450 X 450 X 110 mm thick with bottom thickness of 110 mm up to height of 380 mm and top width of 50 mm thick chamfering with 45° at starts at 380 mm height to 450 mm height as selected by the Engineer-in-charge from approved source/ factory which is laid on existing CC Bed in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and including cost and conveyance of all materials & labour charges including transportation from approved source, loading & unloading charges including contractor profit & overhead charges complete for finished item of work.
1600
1017536
635.96
Supply and fixing of Precast concrete fixed bollard including material and labour charges etc.
90
225000
2500
Supply and fixing of Stone benches of size (6 1/2feetx2 feet) including material and labour charges etc.
48
432000
9000
Supply and fixing of Boulders sizes of 3 ft / 3.5 ft /4 ft (one piece weighs 400 to 600 kilos ) including material and labour charges etc.
80
191866
2398.33
Supply and Installation of WPC Material + Aluminium Channel One Dustbin Area- 40 SQFT including material and labour charges etc.
60
912000
15200
Supply and Installation of 1. Boom Barrier Automatic Boom Barrier Gate ( With 2 Remotes).
2. Sensor Safety cell sensor.
3. Services Installation Charges & Travelling Charges
4. Transport charges Frieght and Delivery Charges
4
243800
60950
Supplying and Fixing of Seating Gazebo Structure and Roof inclunding material and labour charges etc.
443.76
5110996
11517.48
Supplying and Fixing of Drinking Water Point Roof inclunding material and labour charges etc.
9
62595
6955
Supply and Fixing of DRINKING WATER FOUNTAIN DWF 040 Protective anti oil marks & anti Finger prints coating. Normal water supply. Gauge 16 & 18. sheet metal - SS304 Manual Actuated Pressure Flow. MAT-polished surface. Laminar water Flow 01 Dispensing Parabolic spout Nozzles Inlet ½ inch connections. Outlet drain 3/8 inch. Real Time Drain Transparent Surface coating against oil /finger marks Dimensions - Back Panel ( Length 500mm , Height 425mm, Depth 18 mm Bowls Circular diameter 290mm Bowl Box Length 350mm Push Button actuation. Operating Pressure 0.6 Bar. Parabolic up spout laminar jet height adjustable to 6-8 inches. Flow rate 500 ml per min (near to ) Flexible piping wall concealed. Inlet pipe ¼ inch Drain pipe 3/8 inch inclunding material and labour charges etc.
5
119150
23830
Providing cladding to wall with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours, length equal to flooring slabs set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractors profit complete for finished item of work.
210
774072
3686.06
Distmantling exisiting Buildings by using hovel 0.50 cum75 hp & Carting away of excavated earth / debris to a lead of 100 M. complete as directed by the Departmental Authorities of the work, and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work
50
114523
2290.47
Plumbing works
-
-
-
Supply, Installation and commissioning approved make floor mounted Close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects:White Colour
25
245862
9834.51
Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock.
20
56080
2804.02
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make : 590 x 375 x 390 mm of Ist quality including cost and conveyance of all materials, overheads and contractor's profit etc. complete for finished item of work in all respects.
15
47275
3151.68
Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc with solvent jointing as per standard practice including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels.
-
-
-
75mm dia Pipe
540
145216
268.92
110mm dia Pipe
480
188160
392
Supplying & fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work.
108
15583
144.29
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge.
-
-
-
28.60mm OD Pipe - SDR 13.5
580
85004
146.56
34.90mm OD Pipe - SDR 13.5
360
82620
229.5
S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 7 years warranty including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.
25
82427
3297.11
Supply & fixing towel rod (CP) of 24" long and 3/4 " dia including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.
18
7300
405.61
Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 3' 0" x 2' 0" for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors excluding cost of seigniorage charges on marble.
15
26181
1745.45
Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & constructing Brick masonry in CM 1:6 prop. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work (APSS No 1326)
24
13851
577.16
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg. including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.
38
146488
3854.96
Supply and fixing NP soap dish heavy type with NP screws etc., complete for finished item of work in all floors, including cost & conveyance of all materials, labour charges, etc. and overhead & contractor's profit complete for finished item of work as directed by Engineer-in-charge.
48
12013
250.28
Supplying and fixingTV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. overhead & contractor's profit complete for finished item of work in all floors as directed by Engineer-in-charge.
18
10136
563.14
Supplying & Fixing Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 32 mm NB Size including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.
24
45761
1906.71
Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type) Parryware or equivalent including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.
50
23714
474.29
Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.
30
234377
7812.57
Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.
6000
35280
5.88
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge.
-
-
-
41.30mm OD Pipe - SDR 13.5
200
63042
315.21
54.00mm OD Pipe - SDR 13.5
820
426695
520.36
Manufacture, Supply and Delivery of 150mm dia -NP-2 class R.C.C. Plain ended pipes conforming to B.I.S 458/2003 ,Ex-factory, including transportation and all taxes.
480
108302
225.63
Manufacture, Supply and Delivery of NP-2 Class 150mm dia R.C.C. Collars conforming to B.I.S. 458/2003 (rate per each collar) suitable for R.C.C. Plain ended pipes including transportation but excluding all taxes.
160
7998
49.99
Lowering the 150mm dia NP-2 Class RCC plain ended pipes carefully into the trench laying them true to alignment and gradient, jointing RCC pipes with cement joints including curing, the cost of jointing materials i.e., Cement Mortar (1:1.5), hemp yarn etc., and testing including filling with water with a water lead up to 500 Meters excluding cost of rubber rings as per BIS No.783/85.
480
81801
170.42
Manufacture, Supply and Delivery of 200mm dia -NP-2 class R.C.C. Plain ended pipes conforming to B.I.S 458/2003 ,Ex-factory, including transportation and all taxes.
200
53910
269.55
Manufacture, Supply and Delivery of NP-2 Class 200mm dia R.C.C. Collars conforming to B.I.S. 458/2003 (rate per each collar) suitable for R.C.C. Plain ended pipes including transportation but excluding all taxes.
70
4930
70.44
Lowering the 200mm dia NP-2 Class RCC plain ended pipes carefully into the trench laying them true to alignment and gradient, jointing RCC pipes with cement joints including curing, the cost of jointing materials i.e., Cement Mortar (1:1.5), hemp yarn etc., and testing including filling with water with a water lead up to 500 Meters excluding cost of rubber rings as per BIS No.783/85.
200
45446
227.23
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
12
81393
6782.82
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
6
64044
10674.13
Supply and Transportation of 2.00HP(40x40mm) Three phase ISI self priming Mono block IP44 motor pumpset . Makes: Kirloskar / Crompton / Texmo / CRI / KSB /Lubi/ AryenVarsha (ELEC-5.4.13)
10
156200
15620
Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH /KSP(Karunya) /Crompton. complete.,. (ELEC-5.4.16)
5
33000
6600
Electrical items
-
-
-
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
2500
186350
74.54
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) surface mounted with all required accessories fixing of chromium plated metallic base saddles including all labour charges etc., complete[ for run of mains,power plugs , computer boards and AC circuits] Makes : Sudhakar / Modi ( ISI mark).
4600
379776
82.56
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI mark) concealed in wall with all required accessories including masonary work for light, fan , common and separate plug point including all labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
3550
312471
88.02
Supply and Fixing of 25mm outer dia heavy PVC flexible pipe (ISI MARK) surface mounted with all required accessories fixing of chromium plated metallic base saddles including all labour charges etc., complete [ for run of mains,power plugs ,computer boards and AC circuits] Makes : Sudhakar / Modi ( ISI mark).
1020
34720
34.04
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
550
370606
673.83
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.secondary light points.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
255
144585
567
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.(Double hight/stairecase points)
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom.
94
95010
1010.75
Supply and run of 2 of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
620
26430
42.63
Supply and run of 2 of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
1500
79815
53.21
Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete. Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
4350
324466
74.59
Supply and run of 1 of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
5700
121866
21.38
Supply and run of 2 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
2300
260659
113.33
Supply and run of 1 of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
2300
85928
37.36
Supply and run of 4 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: : Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
600
190500
317.5
Wiring with 2 runs of 22/0.3mm (1.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control and 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter fixing on Separate board with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame including all labour charges etc., complete.
Copper wire make:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
155
106686
688.3
Supply and Fixing of 20A 2 Module Modular Socket with shutter and 16A / 20A 1 Way 1 Module Modular Switch duly recessed in wall with 3 Module Hot Dip Galvanized Modular Metal Box size covered with 3 Modular Cover Frame including earth connections and all labour charges etc., complete.[ Power plug ]
Modular Switch,socket,metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
106
63865
602.5
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter-2 Nos and 6A / 10A 1 Way 1 Module Modular Switch controls-2Nos duly recessed in wall with 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete.[ For computer switch board].
Modular Switch,Socket,Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
52
45058
866.5
Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges without bulb (for new installation). BH Make: Anchor / Gold Medal Olive / Million Zoom.
58
11179
192.75
Supply and fixing of 20-24W, not lessthan 1100mm length LED batten lightwith extruded alluminium using andpolycarbonate cover, input voltageAC 220 - 260 Volts with PF0.9,Surge protection: KV,THD15%,with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete with 3 years warranty.Luminaire Make : Phillips / Osram / GE / Crompton /VIN / Bajaj / Havells / Halonix. b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG/ Everlight
48
35328
736
Fixing of 20 LED tube light luminaire on wall / Ceiling with all accessories including giving connections and all labour charges etc., complete.
50
10476
209.53
Supply and Transportation of 15W Down Lighter, Recessed mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver, operating voltage range of 150 to 265
Volts AC, Power factor 0.9 with LED's having efficacy of 120 lumins/watt etc., complete with 3 years warranty with ( BAJAJ 13591 BZSLO 15W WH DOVEE PRO) OR EQUALENT OF PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG / LG LEDs."Luminaire Make : Phillips / GE / Crompton / VIN /
Bajaj / Havells / Halonix.
200
271400
1357
Supply and fixing of........ heavy duty LED Down lighter, suitable forRecessed mounting made of pressure diecast alluminium body withpowder coating, acrylic diffuser with Driver as per IS: 15885 (Part 2/ Sec13) : 2012 , operating voltaGE-Venture ranGE-Venture of 150 to 265Volts AC, P.F 0.9, SurGE-Venture protection: 2KV, THD10% with highpower LED's having efficacy of 100 lumins / watt, CCT: 3000K - 5700K, minimum CRI 70, Luminaire performance complies to IS 10322 (Part 5 /Sec-3) etc.,"a) LUMINAIRE MAKE : Phillips / GE-Venture / Crompton /Wipro / Bajaj / Havells / Halonix/Jaquar/HPL/GM / GreenLites /Gold Medal/Eveready/ FortuneArrt b) LED MAKE : PHILIPS
LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG/Everlight
58
73370
1265
Supply and Transportation of 18W LED bulb with COSTAMISE MADE DECORATIVE SUSPENDED DOOM with 3 years warranty with LED bulb Make : Phillips / Osram / GE / Crompton /VIN / Bajaj / Havells / Halonix. DOOM MAKE: SELECT BY ARCHITECT
281
1264500
4500
Supply and transportation of 100W LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's System efficacy 100lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05,Driver surge protection 4KV, external Surge protection ≥
10KV with wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture /Crompton/ Bajaj/Greenlites / Havells/Capart(Premium) /Halonix/ Polycab/Keselec/HPL/Jaquar/Eveready / Surya (Lumasmax / O Flood)/ FortuneArrt (Fin) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG
995
141100
141.81
Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan without Regulator. Makes : Crompton High Speed Decora / Orient Summer Crown
58
193021
3327.95
Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete. Makes : GM Four-Five / Legrand Arteor / Schneider
Zen celo / MK Blenge.
58
36192
624
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
58
9732
167.81
Supply of 12" (300mm) Light duty exhaust fan with wire guard etc complete etc., complete.Makes : Crompton / Bajaj Bahar WG / Havells Ventil Air-DB / Orient hill air.
67
112873
1684.68
Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
67
35371
527.93
Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete
108
15822
146.5
Supply and fixing of 8 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 24 Nos S.P. out goings and for 1 No 4 pole Incommer etc complete including internal connection and labour charges for surface / flush mounting etc., complete. Incommer: 63A FP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 24 Nos
DB Makes : Legrand / Schneider.
Isolator Make: Legrand-DX3 / Schneider-Acti9.
MCB Make:Legrand-DX3 / Schneider-Acti9.
26
478322
18397
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
confirming to IS:7098 (Part - I).
Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab / Finecab
580
133980
231
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
20
4960
248
Labour charges for run of up to 50sqmm U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) etc., complete.
680
30668
45.1
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mmx 400m x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
34
200659
5901.76
Supply and laying of following sizes Earth wire/Strip in horizontal
/Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as required
540
44820
83
Supply and laying of following sizes Earth wire/Strip in horizontal/Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as required
760
6080
8
Supply and Transportation of 18W Down Lighter, Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver, perating voltage range of 150 to 265 Volts AC, Power factor 0.9 with LED's having efficacy of 120 lumins/watt etc., complete with 3 years warranty with PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG LEDs."Luminaire Make : Phillips / GE / Crompton / VIN /Bajaj / Havells / Halonix.
55
79695
1449
Supply and fixing of....18W.... LED single colour Wall washer,1000mm length, IP65, made of diecast alluminium body with powder coating, with Driver, operating voltage range of 150 to 265 Volts AC, CCT: 3000-4000K , beam angle 25/45 degrees, minimum CRI70, .etc., complete a) LUMINAIRE MAKE : Phillips /Lighting Technologies(LT)/ GE-Venture / Crompton / Wipro /Bajaj / Havells / VIN/Halonix/Jaquar
b) LED MAKE :Bridge Lux / LUMILEDS / CREE / NICHIA /
Epistar.
94
354568
3772
Supply and Fixing of 32mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Modi ( ISI mark).
100
8478
84.78
Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 38/40 size with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete.make Modi with ISI
20
1746
87.3
Supply and run of 4 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
100
22666
226.66
Supply and run of 4 of 140/0.3mm (10.0 Sqmm) PVC FRLS / HFFR insulated flexible Copper cable in existing pipe for mains including all labour charges etc., complete. Makes: :Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
150
69015
460.1
Supply and transportation of 100W LED Flood light Luminaire made of pressure diecast alluminium housing with powder coated,having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's System efficacy 100lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), IK05,Driver surge protection 4KV, external Surge protection ≥
10KV with wide/ Narrow beam optics, THD10% at 110 Volts AC, driver efficiency 90%, , CCT: 3000K - 5700K, minimum CRI70, etc., complete a) LUMINAIRE MAKE : Wipro / Philips/ GE-Venture /Crompton/ Bajaj/Greenlites / Havells/Capart(Premium) /Halonix/ Polycab/Keselec/HPL/Jaquar/Eveready / Surya (Lumasmax / O Flood)/ FortuneArrt (Fin) b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG
6
57132
9522
Supply and fixing of....15W/meter.... LED strip single colour with Driver, operating voltage range of 150 to 265 Volts AC, CCT: 3000-4000K , beam angle 25/45 degrees, minimum CRI70, .etc., complete
a) LUMINAIRE MAKE : Phillips /Lighting Technologies(LT)/ GE-Venture / Crompton / Wipro /Bajaj / Havells / VIN/Halonix/Jaquar
b) LED MAKE :Bridge Lux / LUMILEDS / CREE / NICHIA /
Epistar.
230
287500
1250
Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 12 Nos S.P.out goings and for 1 No 4 pole Incommer including internal connection and labour charges for flush mounting etc., complete.
Incommer: 40A FP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 12 Nos
DB Makes : Legrand / Schneider.
Isolator Make: Legrand-DX3 / Schneider-Acti9.
MCB Make:Legrand-DX3 / Schneider-Acti9.
2
31844
15922
Supply and fixing of 8 Way VTPN DB suitable for accomodating 125A 4 Pole MCCB as incomer-1No, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mountedand and 63A 4P 10KA TP MCBs-8Nos as outgoing including internal connection and labour charges for surface / flush mounting etc., complete. Incommer: 125A,4P,36KA MCCB-1No. Outgoing: 63A, 10KA , TP MCB's -8 Nos
DB Makes : Legrand / Schneider.
MCCB Make: L&T / Schneider / Siemens / Legrand.
MCB Make: Legrand-DX3 / Schneider-Acti9.
3
110022
36674
LT Panel Board:
Fabrication ,Transportation , Supply, Installation, Testing and Commissioning of suitable size , plinth mounting OUT door type LT Distribution panel of 14 guage CRCA sheet for termination of 2X3.5c x240 sqmm alluminium cables with the following incorporated in the panel for Distributing the power supply .(The working drawings for panel board should be got approved by the Department before fabrication of Panel). Main incoming: 1) 630A, FP, 50kA , MCCB -1No. Makes: siemens/Schneider.L&T/ABB 800A Alluminium Bus bar Suitable lenght) - 4nos -Main Phase indicator lamps - 1set (L&T make) 40X6 mm G.I Strip - 1.5 Mtrs
Current Transformer- 500/5A - 6 NosKAPPA make VA meter (0-1000A) - Digital type -1No's ( conzerv/HPL Make)-supply of 6A SP MCB - 3Nos Outgoing : 1)315A 4P MCCB- 2No's 2) 125A 4P MCCB- 2No's Legrand/L&t/Siemens/Schneider make.(Thermal Magnetic release) The panel Size approx:1.3X 1.1 X 0.5mtrs
1
189802
189802.69
Supply of 240 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
confirming to IS:7098 (Part - I).
Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab / Finecab
100
127100
1271
Supply of 185 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
confirming to IS:7098 (Part - I).
Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab / Finecab
50
51150
1023
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
confirming to IS:7098 (Part - I).
Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab / Finecab
150
53700
358
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
2
770
385
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
4
4400
1100
Supply and making one end termination with heavy duty double compression brass gland as per BS 6121:2005 ,IP 66 complete,SIBG type, heavy duty Alluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. Makes:Dowels/Comet/SMI
2
3300
1650
Supply and run of 2 of 84/0.3mm (6.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for mains inlcuding all labour charges etc., complete.Makes:Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
3175
158.75
Supply and run of 1 of 56/0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.Makes: Polycab /RPG / Million / Power Flex / Anchor / V-Guard.
20
1042
52.14
Supply and fixing Distribution board with 20A SP Plug and Socket with SS enclosure with 10/16/20A 10KA SP MCB, C/D Curve ISI Mark including internal connection and labour charges for surface / flush mounting etc., complete .
Makes : Legrand / Schneider.
MCB Make:Legrand-DX3 / Schneider-Acti9.
2
3438
1719.25
Supply and fixing Distribution board with 32A TP Plug and Socket with SS enclosure with 32A 10KA TP MCB, C/D Curve ISI Mark including internal connection and labour charges for surface / flush mounting etc., complete. Make. Legrand / Schneider.
MCB Make:Legrand-DX3 / Schneider-Acti9.
2
7979
3989.65
Supply and Transportation of 32W Down Lighter, Recessed mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver, operating voltage range of 150 to 265 Volts AC, Power factor 0.9 with LED's having efficacy of 120 lumins/watt etc., complete with 3 years warranty with Bajaj 13901 BCDLR 32W WH or equalent of PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /SAMSUNG / LG LEDs. Luminaire Make : PHILIPS / GE / VIN /CROMPTON /BAJAJ / HALONIX / JSTC Solar
285
930810
3266
Supply and transportation of 36w RGB LED Linear Wall washer of Size1000 X 38 X 58 mm mm with high power LED's made of pressure diecast alluminium housing with powder coated,Supply Input voltage 120 - 270 V AC,leads to 24 V DC out put Voltage Drives with beam angle of 15/25/45/60 , P.F 0.90, having efficacy 100 lumens/watt, System efficacy 95lm/W and junction temprature 70°C, with Ingrees protection IP66, IK05,suitable for RGB DMX 512 controller etc., a) LUMINAIRE MAKE : Wipro / Philips/ GE / Crompton/ Bajaj / Greenlites/ Havells/ FortuneArrt
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG /SEOUL.
20
211600
10580
LT Panel Board:
Fabrication ,Transportation , Supply, Installation, Testing and Commissioning of suitable size , plinth mounting OUT door type LT Distribution panel of 14 guage CRCA sheet for termination of 1X3.5c x150 sqmm alluminium cables with the following incorporated in the panel for Distributing the power supply .(The working drawings for panel board should be got approved by the Department before fabrication of Panel). Main incoming: 1) 250A, FP, 35kA , MCCB -1No. Makes: siemens/Schneider.L&T/ABB 300A Alluminium Bus bar Suitable lenght) - 4nos -Main Phase indicator lamps - 1set (L&T make) 40X6 mm G.I Strip - 1.5 Mtrs
Current Transformer- 500/5A - 6 NosKAPPA make VA meter (0-1000A) - Digital type -1No's ( conzerv/HPL Make)-supply of 6A SP MCB - 3Nos Outgoing : 1) 125A 4P MCCB- 4No's Legrand/L&t/Siemens/ Schneider make.(Thermal Magnetic release) The panel Size approx:1.0X1.8 X 0.35mtrs
1
121206
121206.28
Supply of 150 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I). Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab / Finecab
100
83600
836
Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
confirming to IS:7098 (Part - I).
Makes : Torrent / Universal / Polycab / Havells
50
30000
600
Supply and Fixing of Single compression brass cable glands for 3.5 core XLPE armoured cable for 150 Sqmm with brass washers and crimping type aluminium lugs confirming to I.S specifications for cable of 150 Sq.mm including nuts and bolts with connections.
2
1980
990
Supply and Fixing of Single compression brass cable glands for 3.5 core XLPE armoured cable for 95 Sqmm with brass washers and crimping type aluminium lugs confirming to I.S specifications for cable of 95 Sq.mm including nuts and bolts with connections.
2
1310
655
Supply and Fixing of Single compression brass cable glands for 3.5 core XLPE armoured cable for 50 Sqmm with brass washers and crimping type aluminium lugs confirming to I.S specifications for cable of 50 Sq.mm including nuts and bolts with connections.
2
770
385
Labour charges for run of U.G 70&95sqmm cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) etc., complete.
200
9240
46.2
Supply and Laying of P.V.C casing and caping (ISI MARK) with double locking arrangments with groover trunking of size not below 12.5mm height 38/40 size with all accessories, duly sealed at points and erected on Wall / Ceiling including cost of all materials and labour charges complete.make Modi with ISI
20
1746
87.3
Supply Installation Testing andcommissioning of free standing floormounted dust and vermin proofcompartmentalised cubical panelmade out of CRCA sheet, requiredhardware, duly painted by two coatsof zinc/red oxide primer followed byPowder coated / epoxy / PU paintedwith phosphatisation in grey orrequired shade after rinsing. Thepanel having PU/Neoprene rubbergasket of not less than 3mmthickness,separate detachable, glandplate M.S. base channel, hinged doorwith locking arrangement forequipment/switchgear. Thickness ofsheet shall not be less than 1.6mm upto 600mm length/width of anycompartment and be of 2.0mm above600mm. Load bearing structure shallbe of 2.0mm thick sheet supported bybase M.S. channel if required. Sidewalls and cable alley compartmentshaving bolted type doors with
detachable extension type structure(only outer area on all sides shall bemeasured and panel to be abricatedfrom CPRI approved fabricator).
1
66008
66008.97
Insulators for busbar fixing (panel type)16 Nos 60 x 70 x 14 mm Supply and Fixing of 240/220 V, LED (22.5 mm dia ) Pilot lamp with
integral circuit, terminal block, including connection etc. as required.Red/yellow/Green colourL&T MAKE.
Extended earth terminals - both sides with 25X3 mm G.I Strip 50 mm x 6mm GI Flat(2.5 Kgs ?mtr)
Extended earth terminals - both sides with 25X3 mm G.I Strip 50 mm x 6mm GI Flat(2.5 Kgs ?mtr)
Supply and Fixing of Current Transformer , with all necessary support in
existing panel including connection etc. as required:
Makes : As per list of recommended brands.., from 200 / 5 to 400/5 Ratio , 10 VA ,
class 1 accuracycomplete. KAPPA MAKE.
Supply and erection of V A of size 96x96mm on exisiting box / panel board including connections etc., CONZERVE/HPL
MAKE. Base Channwl size of 75X40X6mm (5.7kg/mtr) Mild Steel Items Supply of mcb links 6-32A SP MCB
, and it including all operational, incidental ,labour charges, required tools, overheads & contractors profit complete for finished item of work
-
-
-
Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with HInged door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.5 Mtrs height Pole having dimensions Bottom 130 mm,. Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700 long 'J' bolts along with template.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
30
407484
13582.8
Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal /Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc.complete
30
161700
5390
Fabrication, Transportation and supply of 1.50 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
25
53175
2127
Fabrication, Transportation erection and supply of 1.50 Mtr length Double Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
5
29150
5830
Supply and transportation of 60W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's having System efficacy 100 lm/W and junction temprature 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete
a) LUMINAIRE MAKE : Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj (Edge) / Halonix(Lumos - Super) / Havells (Endura Series) /Capart(Premium)/Greenlites(Hi-Lux) /Polycab/Keselec/ HPL(City Vision)/ Jaquar(Premium)/Eveready/ Surya (Pollux) / FortuneArrt (Leaf)
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG
30
169890
5663
Supply and Transportation of 40W LED Post top antern made with cast Alluminium with decorative opel polycarbonate diffuser with IP 65 protection etc., complete with all accessories
Makes: Crompton LPTO-40-CDL-M/ Bajaj Celesta BGCL 40 W LED Wh/Wipro LP 02 or equivalent in Phillips/Keselec/Havells Endura Spring
20
156400
7820
Supply and fixing of....18W.... LED single colour SPIKE LIGHT, IP65, made of diecast alluminium body
with powder coating, with Driver, operating voltage range of 150 to 265 Volts AC, CCT: 3000-4000K , beam angle 25/45 degrees, minimum CRI70, .etc., complete
a) LUMINAIRE MAKE : Phillips /Lighting Technologies(LT)/ GE-Venture / Crompton / Wipro /Bajaj / Havells / VIN/Halonix/Jaquar
b) LED MAKE :Bridge Lux / LUMILEDS / CREE / NICHIA /
Epistar.
55
165000
3000
Supply and transportation of following glass reinforced polymer (GRP) composite type Conical pole with single arm bracket of length 1Mtr and internal junction box including labour charges etc., complete.
Makes: Bajaj / Kemrock / Valmont/Sumip/Helipole
20
237600
11880
Supply and transportation of base bracket suitable for glass reinforced polymer (GRP) composite type pole including labour charges etc., complete.
Makes: Bajaj / Kemrock / Valmont/Sumip / Helipole
20
34100
1705
Supply and fixing of 40mm Nominal Bore Medium grade G.I.Pipe with fitting suitable for encasing the cable along pole including cost and conveyance of all materials etc., complete for finished item of work.
80
30800
385
Fabrication, Transportation and supply of 1.50 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe.
Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/ Skipper
20
42540
2127
Fixing of LED luminaire (Down lights / Mirror optic / Ornamental type fitting with all necessary accessories in false ceiling / on wall including giving connections and all labour charges etc., complete.
100
14181
141.81
Supply of 300 Sqmm 3.5 Core XLPE insulated, 1100V
grade armoured alluminium cable as per specification
confirming to IS:7098 (Part - I).
Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab / Finecab
-
-
-
3.5c x300 sq.mm
50
77000
1540
3.5c x120 sq.mm
50
36300
726
3.5c x 25 sq.mm
50
11550
231
4C x 10 sq.mm
600
99000
165
Labour charges for run of U.G120 & 185sqmm cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) etc., complete.
50
2475
49.5
Labour charges for run of U.G240 & 300sqmm cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) etc., complete.
50
2640
52.8
Supply , erection, transportation and un loading the 9.0 mtrs RS joist of 150x75mm size box pole structure at site in good condition for HT & LT cable and support MS chanels with clamps including cost and coveyance of all materials and labour charges ect complete.
1
9806
9806.5
Supply and erecting approved made 11KV, 400A A.B switch with all standard accessories etc., complelte with cost and conveyance of all materials and labour charges.
1
20975
20975
supply ,Erection and commissioing of 1set of HG fuse sets on already existing chanel.
1
7225
7225
Supply and fixing of distribution type lightning arrester 11 KV 5 kA as per IS 3070 with mounting base on the existing DP structure
1
9425
9425
Supply of 240 Sqmm3.0 Core XLPE insulated, 11KV
grade armoured alluminium cable as per specification
confirming to IS:7098 (Part - I).
Makes : Polycab / KEI / RPG / Finolex / Orbit / Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab / Finecab
-
-
-
3C x 240 Sqmm, 11KV XLPE
15
26895
1793
240Sqmm 3.0 Core XLPE insulated, 11000V
grade armoured alluminium cable
2
36960
18480
240Sqmm 3.0 Core XLPE insulated, 11000V
grade armoured alluminium cable
2
51976
25988
Supply, Transportation, Installation and Commissioning of 11 KV, 630A, 25 KA Outdoor type Load Break Switch as detailed below with suitable CC foundation and 2 Nos GI pipe earthing with brick massonry chambers etc complete for finished item of work.
a) Load break switch: 11KV,630A, 25 KA with fuse trip, earth switch, manually operated spring chargesd mechanis with 2 no + 2 NC.
b) HT HRC fuse upto 63A - 3 nos.
c) Bus bar connection.
d) Indication lamps.
e) Manual trip Push buttion.
Make:ABB/ Megawin/Amara Raja/L&T
1
132000
132000
Supply and Transportation of 500KVA copper wound Transformers
11/0.433 KV, Three Phase, 50 Hz, DYN 11, ONANtype ,Standard accessories, winding temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5%of the maximum total loss values for 11 KV as per Energy Efficiency Level - 2 at basic Insulation level conforming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014 described as above with Cable box on HV side and Bus duct on LV Side , ON load Tap changer(OLTC) With Remote Tap Change Cicuit
(RTCC) & Automatic Voltage Regulator (AVR) etc., complete and as per the following continuous rating Make:Schneider/Kirloskar/Voltamp/ Esennar/ Toshiba/
KPEL/ Powertech
1
1247000
1247000
Supply Installation Testing andcommissioning of free standing floor
mounted dust and vermin proofcompartmentalised cubical panel
made out of CRCA sheet, requiredhardware, duly painted by two coats
of zinc/red oxide primer followed byPowder coated / epoxy / PU paintedwith phosphatisation in grey orrequired shade after rinsing. Thepanel having PU/Neoprene rubbergasket of not less than 3mm
thickness,separate detachable, glandplate M.S. base channel, hinged doorwith locking arrangement forequipment/switchgear. Thickness of
sheet shall not be less than 1.6mm upto 600mm length/width of anycompartment and be of 2.0mm above600mm. Load bearing structure shallbe of 2.0mm thick sheet supported by
base M.S. channel if required. Sidewalls and cable alley compartmentshaving bolted type doors withdetachable extension type structure(only outer area on all sides shall be
measured and panel to be abrica
1
108750
108750.64
Supply and fixing of Electrolytic grade aluminium bus bar bus bar by means of SMC / DMC type
insulator, high tensile nuts and bolts spring washers in existing panel
including bending , cutting in required shape and size and colour coding
with heat shrinkable PVC sleeves
1
267246
267246.02
Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 0.3mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including brick masonry (CM 1:3) Chamber of size 400m x 400m x 400mm covered with suitable cast iron Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).
4
47599
11899.76
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in brick masonry (CM 1:3) Chamber of 400mmx 400m x 400mm with suitable cast iron cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
8
47214
5901.76
Supply and laying of following sizes Earth wire/Strip in horizontal
/Vertical run in Ground/surface/Recess including,
revitting,soldering,saddles,making connection etc as required
30
5280
176
Supply and laying of following sizes Earth wire/Strip in horizontal
/Vertical run in Ground/surface/Recess including, revitting,soldering,saddles,making connection etc as required
30
2490
83
Supply and laying of following sizes Earth wire/Strip in horizontal
/Vertical run in Ground/surface/Recess including,
revitting,soldering,saddles,making connection etc as required
30
13470
449
Supply of pair of rubber hand gloves suitable for working 11/22 KV supply.
1
440
440
Supply of standard 18"x12"x8" first aid box with all standard contents.
1
1183
1183
Supplying and fixing of LED Bollard with aluminium die casting,glass diffuser,black colour, Height : 1.1m; , IP43. MR Item
MAKE : Monaco - Jaquar
450
5490000
12200
Supplying and fixing of Kerb lights with aluminium die casting, frosted PC diffuser. MR Item
MAKE : BluMon - Jaquar
150
607500
4050
Supplying and fixing of LED outdoor Strip Lights with wattage - 12w/mtr, IP66 Rating. MR Item
MAKE: Jaquar
100
390000
3900
Supplying and fixing of Decorative LED Fixture as compound wall lights with aluminium die casting,glass diffuser,black colour, IP43. MR Item
MAKE : Firenze - Jaquar
90
821250
9125
Supplying and fixing ground lights of 9W, IP Rating : IP67, IK Rating : IK09. MR item
MAKE: Garden Light- Jaquar
20
228000
11400
Supplying and fixing of Wall lights, Die cast aluminium housing, opal PC diffuser, IP54, up-down light. MR Item
MAKE: Xcellent - Jaquar
30
164250
5475
Bed preparation for Dibbling for Bermuda/Doob/ Shade Grass :-Dressing the surface to the desired shape, laying 150 mm (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, compacting to 4" thickness by hand roller including cost of red garden soil, sand and labour charges etc. complete for bed preparation and dibbling rooted slips of grass @2" apart and ramming including slipping of grass, racking the soil before dibbling, watering and ramming complete etc., for finished item of work excluding cost of dibbling grass and fertilizer for 1 sqm
(Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystaline, porous and friable, fertlie, slightly acidic or neutral)
3900
767364
196.76
Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., complete for finished item of work excluding cost of grass, fertilizers and chemicals etc., for 1 Sqm (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
9390
2188715
233.09
Maintenance of lawns: Lawn mowing with electric motor / portable cutter machine and edging & weeding of the lawns (once in 15 days from June - Nov and once in 30 days from Dec - May) with watering 10 to 15 ltrs /per Sqmt/per day basing on season and weather conditions (30 watering is required in a month to maintain sub-soil moisture continuously), application of fertilizers, insecticides, Fungicides (once in a month) by manual excluding cost of fertilizers & water. for Two year
13290
2805412
879.55
Hedge / shrub planting: Digging the trench of size 0.3 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc., (@ 20 gms/pit/sqmt) complete for item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 11 No./Sqm of plants & bag size shall be arrived based on the spacing as per the design.) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
2630
1196255
454.85
Hedge / shrub planting:Digging the trench of size 0.45 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc.,(@ 20 gms/pit/sqmt) complete for item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 5 No./Sqm of plants & bag size shall be arrived based on the spacing as per the design.) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral).
2370
1411595
595.61
Hedge / shrub planting:Digging the trench of size 0.45 mtrs. depth, refilling with red garden soil including cost of red garden soil and farmyard manure at 4:1 ratio, internal transportation of plants, planting etc., including the application of fertilizers and pesticides etc.,(@ 20 gms/pit/sqmt) complete for item of work, but excluding the cost of the fertilizers (@ 20 gms/pit/sqmt) and plant material etc., - unit 1 Sqmt of work. (* 3 No./Sqm of plants & bag size shall be arrived based on the spacing as per the design.) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral).
2645
1535792
580.64
Maintenance of hedge/shrub planting: Trimming of hedges/shrubs (once in 15 days) watering (once in a day @ 5 Lts/per sqmt/per day shall be provide to maintain sub soil moisture continuously). Edge cutting 0.30mtr. away from the edges/shrub (once in a month) and application of fertilizers, insecticides, Fungicides ( once in a month @ 20 gms/pit/sqmt) etc., by manually excluding cost of water and fertilizers for Two year
7645
5110211
2785.16
Bed preparation for Ground cover / Flower beds: Digging the trench of size 150 mm. depth, and Formation of 150 mm. (6") thick of soil mixture at 3:1:1 ratio red garden soil, farmyard manure and river sand, application of fertilizers (@ 20 gms/pit/sqmt) by making smooth surface as per design including cost of soil mixture, filling of the soil mixture and internal transportation etc., for complete item of work. (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt))-unit 1 Sqmt of work. (* 25 No./Sqm of plants & bag size shall be arrived based on the spacing as per the design.) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
1705
421237
247.06
Maintenance of groundcover/flower beds: Weeding, Trimming/pinching and keeping the ground cover in healthy condition (once in a fortnight). Watering to ground cover (one's in three day's @ 5 litres/per Sqmts shall be provide to maintain sub soil moisture continuously) by manually, excluding cost of water. for Two year
1705
513300
1254.4
Digging of 0.3x0.3x0.3 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants and planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
1586
81330
51.28
Digging of 0.45x0.45x0.45 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt)) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
135
16973
125.73
Digging of 0.6x0.6x0.6 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt))
(Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
421
115375
274.05
Digging of 0.75x0.75x0.75 mtrs. pit, filling with soil mixture of red garden soil, farmyard manure at 4:1 ratio including internal transport, application of fertilizers and chemicals (@ 20 gms/pit/sqmt), internal transportation of plants, planting the plants etc., for complete item of work (excluding cost of plant material, fertilizers and chemicals (@ 20 gms / pit/ sqmt) (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)
271
144608
533.61
Maintenance of Palms/Tree planting: Trimming (once in month), watering (once in three days @ 5 Lts/per plant shall be provide to maintain sub soil moisture continuously), formation of basins 0.30m . away from the edges (once in a month) and application of fertilizers, insecticides, Fungicides @ 20 gms/pit/sqmt) (once in quarterly) by manually, but excluding cost of water & fertilizers for month for Two year
2413
1430194
2469.6
Supply & Delivery of topiary/trees/Palms/shrubs/lawn/ ground covers and specified plants as per directions of officer in charge at site including cost of plants and conveyance of all materials and labour charges etc., plants of bag size 7" x 8" of plant height not less than 1.0 feet,
8" x 10" of plant height not less than 3.0 feet,
13" x 13" of Tree/Palm height not less than 5 feet,
13" x 13" of plant (Hedges & Shrub) height not less than 2 feet,
15" x 16" of plant (Tree/Palm/Topiary) height not less than 5 feet, 18" x 18" plant (Tree/Palm/Topiary) height not less than 6 feet, bottom dia of the stem is 0.75'' and above, 21" x 21" and above plant (Tree/Palm/Topiary) height not less than 7 feet, bottom dia of the stem is 1'' and above.
Heights mentioned above are excluding bag height.
All the plants supplied shall be with sturdy stem, well formed crown, vigorously growing tip, healthy foliage without any infestation and the plants shall be supplied after proper hardening off. The rates inclusive of loading, transportation to the site, unloading & handling.
-
-
-
For local grass type (paspalum grass)
3900
468000
120
For mexican grass
5990
718800
120
For Korean grass
3400
510000
150
Bird Of Paradise OR Strelitzia reginae
900
117000
130
Jasmine
300
24000
80
Floribunda Rose
500
25000
50
Blazing Star
165
41250
250
Goldenrod
50
12500
250
Annual Phlox
1100
275000
250
Joe Pye Weed
30
7500
250
Iron Weed
50
12500
250
Buttonbush
75
18750
250
Milkweed
45
11250
250
Tick-seed
50
12500
250
Lantana
375
9375
25
Magnolia Dwarf Coco
100
120000
1200
Heliconia Rostrata
600
78000
130
Yellow Rose
1100
88000
80
Allamanda purple Or Violet
2200
55000
25
Allamanda biscuit
1100
27500
25
Lantana Red
1250
20000
16
Jasmine Mini/Mogra
250
8750
35
Rosa White Success
250
18750
75
Rosa Friendship
250
18750
75
Jasmine Rose Regular
300
39000
130
Cape Jasmine
250
10000
40
Alpinia
250
37500
150
Strelitzia reginea
250
37500
150
Murraya
250
5500
22
Canna Red
250
42500
170
Pennisetum Santrum
550
19250
35
jacquemontia
25
1250
50
pyrostegia venusta
25
1250
50
allamanda cathartica
25
1250
50
ipomea horsfolliae
25
1250
50
vernonia elaeagnifolia
25
1250
50
quisqualis indica
4
200
50
climbing frangipani
4
260
65
bougainvillea
6
390
65
bougainvillea yellow
6
390
65
bougainvillea orange
6
390
65
Juhi/Jasminum Auriculatum
5
325
65
Rangoon Creeper
5
250
50
Scarlet Passion Flower red
5
500
100
Senecio Orange
5
500
100
Passion Flower
6
600
100
Magnolia Mutabilus
100
65000
650
Lantana Purple
2500
40000
16
Powderpuff Hybrid Red Or Calliandra
100
16000
160
Jatropha pandurifolia red
300
21000
70
Tagar Double Frills
500
20000
40
Nerium Red Single
750
18000
24
Nerium Red Double
150
3750
25
Crepe Myrtle Purple
100
20000
200
Chinese Fringe Flower Or Loropetalum Chinense
250
20000
80
Hymenocallis littoralis
2750
41250
15
Dracena colarama
1250
22500
18
Caesalpinia pulcherrima
300
30000
100
Ficus Panda Topary form
250
37500
150
Heliconia
450
58500
130
Canna Red
750
127500
170
Ficus Benjamina Topary form
250
62500
250
Dracena colarama
500
9000
18
Senecia dusty Miller
2750
110000
40
Alpinia
450
67500
150
Strelitzia reginea
750
97500
130
Murraya
750
16500
22
Pennisetum Santrum
750
26250
35
Clerodendron
1650
99000
60
Abrus precatorius
150
12000
80
Acorus calamus
150
12000
80
Bacopa monnieri
150
7500
50
Barleria lupulina
150
9000
60
Cassia angustifolia
50
7500
150
Calotropis procera
150
6750
45
Calotropis gigantea
150
6750
45
Catharanthus roseus
550
24750
45
Carissa congesta
50
12500
250
Centella asiatica
550
24750
45
Coleus barbatus
550
27500
50
Curcuma longa
550
55000
100
Cymbopogon citrates
550
11000
20
Cymbopogon nanus
550
11000
20
Datura metel
550
55000
100
Datura alba
550
55000
100
Eclipta alba
550
33000
60
Zingiber officinale
250
25000
100
Geranium wallichianum
250
25000
100
Glycyrrhiza glabra
550
55000
100
Justicia gendarussa
250
25000
100
Lawsonia inermis
250
8750
35
Mentha x piperita
550
22000
40
Mimosa pudica
550
24750
45
Mucuna pruriens
550
27500
50
Nerium oleander
250
11250
45
Nyctanthes arbor-tristis
50
8000
160
Ocimum basilicum
550
27500
50
Ocimum gratissimum
550
27500
50
Ocimum kilimandscharicum
550
33000
60
Ocimum sanctum
550
16500
30
Thevetia neriifolia
250
10000
40
Tephrosia purpurea
250
25000
100
Thuja compacta
50
9000
180
Tinospora cordifolia
550
16500
30
Tylophora indica
550
55000
100
Vetiver
250
8750
35
Vitex negundo
250
22500
90
Withania Somnifera
550
49500
90
Woodfordia fruticosa
550
49500
90
Hibiscus visrai red
15
1500
100
Hibiscus visrai orange
15
1500
100
Hibiscus visrai yellow
15
1500
100
Hibiscus hawain
15
1500
100
Mussaenda White
200
36000
180
Nerium Yellow Single
300
24000
80
Satin Wood Tree Or Madhu Kamini
100
2500
25
Melastoma Malabathricum
300
90000
300
Ixora Semi Dwarf Yellow Exotica
300
10500
35
Ixora Mini Dwarf Pink
300
10500
35
Bougainvillea White
500
17500
35
Ixora red
120
4200
35
Ixora yellow
120
4200
35
Ixora pink
120
4200
35
Ixora white
120
4200
35
Ixora semi pink
120
4200
35
Ixora semi white
120
4200
35
Parijatam
80
12800
160
Hibiscus visrai red
120
6600
55
Hibiscus visrai orange
120
6600
55
Hibiscus visrai yellow
120
6600
55
Hibiscus hawain
120
6600
55
Allamanda gladiator
440
15400
35
Allamanda sandle
440
15400
35
Allamanda yellow
440
15400
35
Allamanda violetia
440
15400
35
Turneria white
880
39600
45
Belbonia yellow
880
52800
60
Ferns
7500
225000
30
Pandanus
7500
112500
15
Rhoeo spathacea
6250
112500
18
Ophiopogon
7250
145000
20
Hedera canariensis
5000
175000
35
Wedelia trilobata
5000
100000
20
Mist Flower
75
18750
250
Climbing Aster
75
18750
250
Mexican Sunflower
75
7500
100
Arizona passionflower
75
18750
250
Cowpen daisy
165
41250
250
Desert Marigold
165
41250
250
Pink Fairy Duster
75
18750
250
Rough Sweetbush
165
41250
250
Shrubby Deervetch
50
12500
250
Tahoka daisy
50
12500
250
Purple threeawn
20
5000
250
Pterocarpus santalinus
3
1950
650
Alstonia scholaris
2
1300
650
Artocarpus heterophyllus
2
1300
650
Butea monosperma
4
2600
650
Mangifera indica
7
4550
650
Mimusops elengi
2
1300
650
Acacia catechu
2
1300
650
Ficus religiosa
1
650
650
Dalbergia latifolia
4
2600
650
Prosopis cineraria
4
2600
650
Ficus benghalensis
1
650
650
Phyllanthus emblica
2
1300
650
Ficus racemosa
2
1300
650
Syzygium cumini
7
4550
650
Gmelina arborea
1
650
650
Ficus religiosa
1
650
650
Ficus benghalensis
1
650
650
Butea monosperma
2
1300
650
Aegle marmelos
1
650
650
Terminalia arjuna
8
5200
650
Mimusops elengi
5
3250
650
Barringtonia racemosa
4
2600
650
Artocarpus heterophyllus
2
1300
650
Prosopis cineraria
1
650
650
Neolamarckia cadamba
8
5200
650
Mangifera indica
1
650
650
Azadirachta indica
1
650
650
Madhuca longifolia
1
650
650
plumeria alba
15
9750
650
plumeria rubra
10
6500
650
plumeria acutifolia yellow
6
3900
650
plumeria obtusa
8
5200
650
cassia fistula tree
12
7800
650
lagestroemia speciosa
9
5850
650
coral jasmine tree
14
9100
650
cochlospermum religiosum tree
11
7150
650
milling tonia hortensis or indian cork tree or bondu malli
5
3250
650
tabubia rosea
18
11700
650
lagestromia pink tree
7
4550
650
caselpeniapulcherrima
5
3250
650
jacaranda mimosifolia
14
9100
650
cardia sebestena
8
5200
650
jacaranda arborea tree
11
7150
650
Traveller Palm
11
7150
650
Champion Bottle Palm
5
5000
1000
Royal Bottle Palm
6
3600
600
Fox Tail Palm
5
3000
600
Arcea Palm
6
3600
600
Latania Lontaroides
5
3250
650
Chamaedorea Seifrizii Or Bamboo Palm
8
5200
650
Rhapis Excelsa
9
5850
650
Kentia Forsteriana
3
1950
650
Caryota mitis
5
5000
1000
Phoenix sylvestris
9
27000
3000
sabal mexicana
3
9000
3000
Thrinax parviflora
9
27000
3000
Pongamia pinnata
17
11050
650
ceiba speciosa
31
31000
1000
azadirachta indica
11
7150
650
Grevillea robusta
18
11700
650
Peltophorum pterocarpum
10
650
65
Putranjiva roxburghii
3
1950
650
Saraca indica
3
1950
650
Tamarindus indica
5
3250
650
Magnolia grandiflora
8
5200
650
Madhuca indica
8
5200
650
Kigelia pinnata
8
5200
650
Swietenia mahagoni
12
7800
650
Jacaranda mimosifolia
1
650
650
bahunia hybrid tree
20
13000
650
ashoka tree
8
5200
650
tabubia argentea tree
18
11700
650
rudraksha tree
20
13000
650
hari chmpa manoranjani tree aaku sampenga
24
15600
650
spathodia tree
8
5200
650
golden bottle brush tree
24
15600
650
cassia javanica tree or pink shower tree
20
13000
650
red sandors red sndle wood tree yerra chandanam
26
16900
650
bakul tree or indian medles tree
10
6500
650
soap nut tree kunkidi chettu
18
11700
650
indian almond tree badam chettu
11
7150
650
flame of the forest tree
5
3250
650
termanalia mentalia
12
7800
650
Ficus krishnae
1
650
650
Ficus glomerata
1
650
650
Ficus benjamina
1
650
650
Ficus nuda
1
650
650
Ficus elastica (ordinary)
1
650
650
Ficus elastica (Black prince)
1
800
800
Ficus panda
1
650
650
Ficus variegated
1
650
650
Ficus lyrata
1
650
650
Ficus sterlight
1
650
650
Ficus infectoria
1
650
650
water apple green
4
2600
650
mango alphanasa
5
5000
1000
Jack fruit
4
2600
650
Indian Jujube Apple
6
3900
650
Custard Apple
7
4550
650
guava black
6
7200
1200
Supply, Installation, Testing & Commissioning of 4.0 MP IR Dome / Bullet Camera , 3MP IR Indoor Dome UP to 30m IR, IP address conflict, Make: Hikvision / Honeywell
16
159680
9980
Supply, Installation, Testing & Commissioning of 2.0 MP IR PTZ , IR UP to 50m IR, IP address conflict, Make: Hikvision / Honeywell
2
112000
56000
Supply, Installation, Testing & Commissioning of 32 Channel NVR.
Make: Hikvision / Honeywell
1
67890
67890
Supply, Installation of 6 TB SURVILLANCE HDD
Make: Seagate / WD
2
42500
21250
32'' Commercial Television with wall mount accessories. The CCTV monitors shall be the perfect professional security monitor with Full HD a native 1920x1080 panel resolution optimized for CCTV applications and designed for 24/7 use. Benefiting from the latest onboard LED panel technology that offers excellent picture quality along with a fast 8ms response time. Shall offer 600TV lines high resolution and various video output via HDMI, VGA. Built-in Speaker, Accessories : Wall Mount stand. Make: LG / Samsung
1
45780
45780
Supply & Fixing of small business 24 port Gigabit, POE Switch for CCTV cameras Make: Netgear
1
32000
32000
Supply & Fixing of small business 8 port Gigabit, POE Switch for CCTV cameras Make: Netgear
1
26590
26590
Supply & Fixing of small business 4 port Gigabit, POE Switch for CCTV cameras Make: Netgear
3
52800
17600
Supply & Installation of CAT 6 Cable Make: D-link
1000
34000
34
Supply & Installation of 12 fibre cable
500
27000
54
Supply & Installation of Medium 25mm PVC Conduit with required accessories for above CAT-6 Cable
150
8100
54
Supply & Installation of 9U rack for above mentioned NVR
1
7590
7590
Supply & Installation of 6U rack for above mentioned NVR
1
5540
5540
Supply & Installation of 2U rack for above mentioned NVR
1
2800
2800
S& F 25 mm Nominal Bore GI pipe Light Grade properties & weight as per IS 1239ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete
100
33000
330
Pole Mount Boxes for Cameras
16
1600
100
Fibre Terminal Boxes with slicings
8
3200
400
Patch Cords
12
1440
120
PVC for main 6kg/cm2 -90mm
1110
185925
167.5
PVC for main 6kg/cm2 -75mm
360
42120
117
PVC for main 6kg/cm2 -63mm
900
74700
83
PVC for main 6kg/cm2 -50mm
1200
64200
53.5
PVC for main 6kg/cm2 -40mm
1800
64800
36
TUBE OD16MM CL2X400 MTR -16mm
2000
19200
9.6
DRIPPER 8 LPH
2000
4200
2.1
Drip Lateral with in built drippers of 4 lph @ 30cm spacing-16mm
5000
52500
10.5
DRIPLINE R 16MM2.0LPH50CM-16mm
2000
23300
11.65
DIS/SIS TURBO STAKE DRIPPER 2LPH -16mm
1000
1070
1.07
Stakes for fixing lateral on mound -16mm
500
825
1.65
End caps-16mm
500
950
1.9
Take off -16mm
500
900
1.8
Grommets -16mm
500
1200
2.4
Joiners -16mm
500
1200
2.4
J-TURBO AQUR/ LINE ELBOW 16 MM
500
1375
2.75
J-TURBO AQUR/ LINE TEE 16 MM
500
1925
3.85
SPR. 565 POP STAR PLUS 3/4"
100
65500
655
3/4"X30 CM STND.SWING JOINT,4S.E
100
13300
133
SERVICE SADDLE 50 MM X3/4"- HD
50
2277
45.55
SERVICE SADDLE 63 MM X 25MM(3/4)- HD
50
2985
59.7
SERVICE SADDLE40 MM X 25MM(3/4)- HD
30
1260
42
POP UP MINISTER 4"WITH VAN 17A 1/2"
150
34800
232
SERVICE SADDLE 63MM X 1/2"- HD
100
4555
45.55
1/2"X30 CM STND.SWING JOINT,4S.E
150
15150
101
SERVICE SADDLE 50 MM
X1/2"- HD
50
2277
45.55
SERVICE SADDLE 40 MM X1/2"- HD
30
1366
45.55
CTRL VALV 90MM TEFLON SEAL PLAIN
10
16950
1695
CTRL VALV75MM TEFLON SEAL PLAIN
5
3980
796
CTRL VALV 63MM TEFLON SEAL PLAIN
8
4768
596
FLUSH VALVE 50 MM
25
1503
60.15
JCM 50M3/HR-M 80MM(3) SIN WITH M.MF.
1
35810
35810.5
DISCLEAN-PL FIL FL 50M³/HR 90MM(3)-SIL
1
5429
5429.5
PRESSURE GUAGE GLYCERINE FILLED &CORK
1/4"
2
702
351
GM. NON RETURN VALVE 3."AP
2
7930
3965.35
DBL ACT AIR/VAC RELE VLV32MM(1)+D3750
10
1101
110.1
PUMP 55-60 M HEAD WITH 7 LPS DISCHARGE AND
ACCESSORIES DUTY AND STAND BY
2
150000
75000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements