Andhra Pradesh Urban Greening And Beautification Corporation Limited Tender

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply and fixing of Kadapa slab (rough) 50mm thick and size of 0.457x0.457m stone edging including excavating trench in ordinary soil, laying P.C.C (1:4:8) 100 mm thick and fixing the stone in alignment and refilling the excavated soil conveyance of all materials and labour charges including transportation complete for finished item of work

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / lime solid blocks of size 290mm x 225mm x 140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contractor profit etc., complete for finished item of work. (APSS No. 501 & 504).

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Plastering 12mm thick single coat in CM(1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904)

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Filling with carted gravel in pathways, trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work(APSS NO.309&310)

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply & Fixing Sadarhalli granite stone with 5 line dressing Double Patti of 5' length seating benches with back rest and its width 16'' with 4" thick and 18" height with 4" thick and leg size 4'' width, including cost and conveyance of all materials like granite benche, cement, sand to work site loading ,un loading transport and all operational, incidental labour & lift charges,and overheads & contractors profit complete for finished item

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Flooring with 16 to 18mm thick high polished / Flame Finished / leather finished granite stone slabs other than black and regular colours (i.e. of shades like paradise / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special)

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Flooring with Rough black Kadapa slabs minimum of 50 mm thick of size 0.457m x 0.457m set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including labour charges for dressing of flooring stones etc., complete for finished item of work,. (APSS No.703 & 701)

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Flooring with Rough Shahabad / Tandur stone slabs of 40 mm thick set over base coat of cement mortar (1 : 8) 12 mm thick over CC bed already laid or RCC roof slab, including pointing with cement mortar 1:3 duly filling joints nearly, including cost of all materials like flooring stone, cement, sand, and water etc., complete, including labour charges for dressing of flooring stones etc., complete for finished item of work,. (APSS No.703 & 701)

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Vibrated Plain Cement Concrete M 20 Nominal mix using Concrete MIXER, 20mm size hard granite machine crushed graded metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete , including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site including steel centring, shuttering, machine mixing, lift charges, laying concrete, vibrating, curing, overheads & contractors profit etc., complete for finished item of work (APSS No. 402 & 403)

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) (Fe 500 / Fe 500D grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including overheads & contractors profit complete for finished item of work.( APSS No.126)

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Filling with carted coarse sand in play area, pathway, foundations bed and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental ,labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work(APSS NO.309&310)

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of SKY WALKER with main frame shall be minimum of 80mm NB dia of thickness not less than 4.50mm & Handle pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Plastic/Rubber grips on top end. The handle pipes are hinged over 80NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. The handle pipes shall be further extended to the 32mm NB dia on both sides. Paired rectangular tubes with four foot rests are linked to main frame. Foot rest shall be made of Aluminum material - LM26 grade. Total structure is supported on base frame shall be made up of rectangular pipe of 50X50X3mm and side frames shall be made up of 32mm NB dia GI Pipes. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC and Govt. of A.P emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of TAI CHI SPINNER 4 WHEEL with center pipe shall be of minimum 100mm NB dia of thickness not less than 5.00mm, Support frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & TAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC and Govt. of A.P emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of DOUBLE AIR WALKER with three prime stand pipes shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Pedestal frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle frame shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC and Govt. of A.P emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of SEATED PULLER DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC and Govt. of A.P emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of CHEST PRESS DOUBLE with prime stand pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns ionized coated and zinc dipped joint with robotic welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC and Govt. of A.P emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of HORSE RIDER with main frame shall be minimum of 100mm NB dia of thickness not less than 5.00mm, handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting link pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. The handle frame are hinged over 100NB main frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC and Govt. of A.P emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of STANDING TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Standing twister plate support pipe shall be minimum of 80mm NB dia of thickness not less than 4.5mm, Bottom frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC and Govt. of A.P emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of SINGLE SIT UP BOARD with Footrest support & sit up board support pipe shall be minimum of 50mm NB dia of thickness not less than 4.1 mm, Handle frame & seat frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting link pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns zinc dipped joint with robotic welded. Sit up board made with high quality FRP / SS304 perforated material. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of 4 IN 1COMBINATION (SURF BOARD+LEG PRESS+PECK DECK + SEATING TWISTER) with all prime pipes shall be minimum of 100mm NB Dia of thickness not less than 5.00mm, 4 functions base pipes are shall be minimum of 80mm NB dia of thickness not less than 4.50mm and hinged over to prime pipe of 100mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns ionized coated and zinc dipped joint with robotic welded. The handle frames are hinged over to 80NB base link pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation frame pipe shall be 100mm NB with 6 numbers of self-anchoring shall be not less than 300mm deep supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of POMMELO HORSE with prime pipes shall be minimum of 80mm NB dia of thickness not less than 4.50mm, bottom pipe shall be minimum of 50mm NB dia of thickness not less than 4.1 mm & rest of the pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanized with minimum of 75 microns ionized coated and zinc dipped joint with robotic welded. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. All open ends of pipes, bearings, bushes and Base cover shall be closed by SS 304 grade Stainless Steel for safety against entrapment, corrosion & water resistant. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with APG&BC emblem and your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV- stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of 1.5m x 2.2m size of FOUR SEATER SWING of Arihant/ Equivalent make including transportation, installation, commissioning, loading and unloading etc., for complete finished item of the work. 1.Swing leg pipe : 40NB hot dip galvanized swing leg pipe of length 2300mm conforming to IS 1239 with GI thickness up to 60µ. 2. Top pipe : Four Seater swing top fixed to 50NB Galvanized pipe having C Class material of length 1490mm at the center and two junction box frame at the ends to attach leg pipes. 3. Junction box : 225mmx103mm junction box made from 5mm thick GI plate to house the two swing leg pipes & top pipe. 4. Seat frame: side frame consist of Rectangular tube having 50X25X4 mm thick. 20NB bend pipe used for seat frame support. 40NB bend is used for Entry Support structure. 5. Bearing Assembly: Shaft for UCP 207 Bearing is self-lubricated made of SKF make shall be provided for smooth & trouble-free movement. 6. Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 7. Powder coating:- It shall be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. 8. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. 9. All open ends of pipe been closed by GI caps for user safety against entrapment.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of 6.5m x 1.5m size of FOUR SEATER ARC SWING of Arihant/ Equivalent make including transportation, installation, commissioning, loading and unloading etc., for complete finished item of the work. 1. Arc swimg frame: 6000mm long 80NB Pipe bent in Single Piece & welded together with a flange 5mm thick & ISA of 40x40x5mm to form a strong frame at bottom & middle. The 80NB pipe is hot dip galvanized pipe conforming to IS 1239 with GI thickness of 60µ. Height of the frame is 2700mm. 2. Top pipe : 50NB Top Pipe with two Arc Swing Flanges welded at both its ends. Pipe can withstanding torsional stress created due to swinging motion. These 50NB top pipe is hot dip galvanized pipe of length 2950mm conforming to IS 1239 with GI thickness of 60µ. 3. Seat assembly : a) Swing clamp assembly: Swing clamps made up of two parts are joined together with M6 Allen bolts along with S-Hook & a specially designed swing pin.The S-Hook is specially designed to house a bearing for smooth & noiseless swinging. The clamps are made from injection molded Nylon-6 plastic. b) Chain : Rubber dip molded swing chain of dia. 6mm & 1450mm Long. c) Hook: S-Hook of dia 8mm & 145x130 Triangular hook of Grade SS 304. d) Seat: Rubber Seat made by Natural Rubber with sufficient reinforcement.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of Jungle Gym of Arihant/ Equivalent make including transportation, installation, commissioning, loading and unloading etc., for complete finished item of the work. 1) Main frame Structure: Main pipe 42.5mm OD support pipe hinged over with 25mm outer dia pipes . 2. Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 3) Welding: Welding shall be done with robotic welded and Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process should dressed of removing all sharp edges and burrs. 4. Powder coating:- It shall be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. 5. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. 6. All open ends of pipe been closed by GI caps for user safety against entrapment. 7. Certificate: ISO9001:2015 8. Color: Multicolor for optional or customized & As per RAL shade. 9. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;supply, delivery and commissioning of FRP Triple Slide of Arihant / Equivalent make including transportation, installation, commissioning, loading and unloading in complete finished item of the work. 1) 3 in 1 Slide:- 3 numbers of Slide Platform is made up of Fiber Reinforced Plastic (FRP) combined in 1 model. Centre Support pipe made from 80NB Galvanized pipe. Steps and step railings consists of 20NB hot dip galvanized pipe bended to form frame to form a 3 in 1 slide joining together to GI Pipe with SS 304 graded nonrusting nut-bolts, made from Nylon Grade-6 plastic. 2. Platform:- a. Material:-Fiber Reinforced Plastic (FRP) with anti-skid surface on top. b. Brazing Frame:- ISA 25x25x5mm or ISA40x40x5mm thick and ISF 40x5mm thick which is galvanized and then duly Powder Coated. c. Vertical Pipes:- 80NB GI pipes should be used of Heavt Duty ('C' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 3. Ladder: - The ladder is made up of with required size and thickness of L angle/ cirular pipes with necessary supporting steps and suitable railing over the platform & for ladder as per the safety norms.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, delivery and commissioning of Butter Fly swing of Arihant / Equivalent make including transportation, installation, commissioning, loading and unloading in complete finished item of the work. 1. Structural frame: a) Main frame is made up of 80NB pipe. b) ?U? shaped frame is made up of 25NBpipe c) the handle frame is made up of 20Nb pipe d) Sitting place id made from 15NB pipe e) Both 80NB main frame pipes are joint with 25NB pipe. 2. Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 3. Bearing: Bearing is self-lubricated made of SKF/NTN/ NACHI make shall be provided for smooth & trouble free movement 4. Pins & Circlips: 12mm diameter pins shall be made from EN8 material & circlip A10 5. Powder coating:- It shall be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. 6. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. 7. All open ends of pipes been closed by GI caps for user safety against entrapment. 8. Certificate: ISO9001:2015 9. Color: Multicolor for optional or customized & As per RAL shade. 10. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, delivery and commissioning of 4 No?s Seats made with FRP Fibre Seats and fitted both ends of 50 MM Dia Pipe length8 Ft with Bolts & Nuts and both fitted on Horizontal Pipe 3? length and 60 mm Dia?U? shape (rivers) with clamps with fibre Seats of Arihant / Equivalent make including transportation, installation, commissioning, loading and unloading in complete finished item of the work. Length : 2438 mm Width : 914 mm Height : 914 mm 1. Centre Main Frame Structure:- 80NB hot dip galvanized pipes conforming to IS 1239. 2. See saws:- 2 Nos of See saws made up of 80NB GI pipe conforming to IS 1239 with proper holdings. 3. FRP Seats: - 4 nos. of FRP Seats 4. FRP (FIBER REINFORCED PLASTIC):- All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material should not less than 5 mm as per the product. The FRP material should be tested for abrasion resistance & UTS (ultimate tensile test). 5. Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 6. Powder coating:- It shall be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply, Delivery, Installation and Commissioning of 2.5m x 1.5m size of Rock cum net climber of Arihant/ Equivalent make including transportation, installation, commissioning, loading and unloading in complete finished item of the work. 1. Pad: Rock climber 7Ft. pad made from Fiber Reinforced Plastic (FRP) attached to the angular frame. The pad is provided with rock shaped part ergonomically spaced in zig-zag manner for climbing act.The rocks are bolted on same platform, with a gradient of 65 degree from the ground. 2. Supports: Bend angular frame made from 40NB Galvanized pipe conforming to IS 1239:1979 with base plates fixed on each end and grounded for strong foundation.It has Ø12 U-hook on one side for attaching rope.It has profile plate for top support. and has plate 130x50x5 for bottom support. 3.Top pipe: It is made from 40NB top pipe of 1190mm long with Dia. 12 U-Hooks fixed on one side. 4. Rope: Rope size conforming to standards EN11761:1998 for minimum grip requirement. It is size of Ø18 of nylon.Mesh size conforming to standards EN1176-1:1998& ASTM - F1487:07a for safety against entrapment of head & neck 5. Clamp: Its is made from nylon. nylon rope attached by specially designed nylon rope clamps used which has rope integrated inside which hold it tightly and avoids breaking

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply and Transportation of XLPE/PVC insulated & PVC sheathed armoured cables 4 C x 4 sq.mm of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc including cost and conveyance of all materials ,overheads & contractors profit etc., Make: Torrent / Universal / Unicab / Havells / KEI/ Polycab/ Gloster/ Orbit/Paragon/RR Kabel/RPG/Rhino

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply and Laying of U.G cables upto 50 Sq,mm including earth work excavation of trench 300x600mm and ,laying the cable on sand cushion of 150 mm thick ,covering the cable withRough Shahabad / Tandur stone slabs of 25 mm thick and refilling the trench with the excavated soils[excl. rock] , including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including the supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs heightPole having dimensions Bottom 155 mm,. Top 70mm with 3mm thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750 long 'J' bolts along with template, and add required number of steps as instruction of Engineer-in-Charge including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work Makes: Bajaj / Valmont/Laasma/Transrail/Utkarsh/ Skipper/Consoul

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Fabrication, Transportation and supply of 1.0 Mtr Length Single Arm Bracket made with MS galvanized 40mm / 50mm dia Pipe. including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work Makes: Bajaj / Valmont/Laasma /Transrail/Utkarsh/Skipper/Consoul

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply and fixing of 120 W LED Street light Luminaire for existing street light pole, Luminaire made of pressure diecast aluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including as required complete as per the direction of Engineer-in-charge and including cost of all materials to site, incidental giving connections and all labour charges overheads & contractors profit etc., complete for finished item of work a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) /GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge)/ Halonix (Modular/ Lumos-Super) / Havells (EnduraSeries)/Greenlites(HILux)/Capart (Premium)/Polycab/Keselec/ HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Art (Leaf) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and including cost and conveyance of all materials ,overheads & contractors profit etc., complete.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply and fabrication of street light poles made with medium quality MS Pipes of 88.90mm OD for 1670mm long, 60.3mm OD Pipes of 1670 mm long and 42.4 mm OD for 1670 mm long welded to each other for a total height of 5.0 m and providing 33.70 mm OD MS pipe of 1000 mm long for arm bracket for Luminaires fixing welded to main pole at suitable angle, suitable pole cap, base plate 300 x 300 x 10 mm and 4 Nos of 16 m dia 700 long 'J' bolts along with template including cost of welding rods, power charges, labour charges for cutting, placing, welding and erecting in position, cost & convenience of all materials including wastage to site, complete painting the total length of pipe with Painting to new iron work with one coat of Red oxide primer and two coats with synthetic enamel paint Grade-II VOC including cost of all materials ,labour charges etc for finished item of work.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply and fixing of 60 W LED Street light Luminaire for existing street light pole, Luminaire made of pressure diecast aluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including as required complete as per the direction of Engineer-in-charge and including cost of all materials to site, incidental giving connections and all labour charges overheads & contractors profit etc., complete for finished item of work. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) /GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge)/ Halonix (Modular/ Lumos-Super) / Havells (EnduraSeries)/Greenlites(HILux)/Capart (Premium)/Polycab/Keselec/ HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Art (Leaf) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply and fixing of 45 W LED Street light Luminaire for existing street light pole, Luminaire made of pressure diecast aluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100 lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., including as required complete as per the direction of Engineer-in-charge and including cost of all materials to site, incidental giving connections and all labour charges overheads & contractors profit etc., complete for finished item of work. a) Luminaire Make : Wipro(Skyline) / Philips (Greenline Extra) /GE- Venture / Crompton(Nexus / Hawk series) / Bajaj (Edge)/ Halonix (Modular/ Lumos-Super) / Havells (EnduraSeries)/Greenlites(HILux)/Capart (Premium)/Polycab/Keselec/ HPL(City Vision)/Jaquar (Premium) /Eveready /Surya (Pollux) / Fortune Art (Leaf) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA /OSRAM / SAMSUNG / LG.

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Foundation and erection charges with special T&P, for 5 Mtrs. Long MS / GI Garden pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.45Mtr x 0.45Mtrs x1.2 Mtr size pedestal with Vibrated Plain Cement Concrete M 20 Nominal mix with necessary steel (10 kgs) reinforcement and curing for 7 days as directed by the field engineers during execution including excavation of Earth/BT all labour charges and cost and conveyance of materials etc including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply and Wiring with 1 run of 3 core 1.50 Sqmm XLPE/PVC insulated & PVC sheathed unarmoured control cables of 1.1 KV grade with copper conductor as per IS 7098 Part-I -1988 etc in the existing pipes for main supply as required complete as per the direction of Engineer-in-charge and including cost of all materials to site, incidental giving connections and all labour charges overheads & contractors profit etc., complete for finished item of work Make: Torrent / Universal / Unicab / Havells / KEI/Polycab/Gloster /orbit / Paragon/ RR Kabel/ RPG

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply of 4 core 4.0 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work Makes: V-Guard/Bonton /Finecab/ HPL / GM / Million / Goldmedal /Fortune Art / /Sudhakar/Orbit/ Tamra/Anchor/Plaza/Vihan/Ollvin

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply and fixing of 1 No. 6-32A SP MCB 10KA C/D Curve ISI mark as required complete as per the direction of Engineer-in-charge and including cost of all materials to site, incidental giving connections and all labour charges overheads & contractors profit etc., complete for finished item of work. Makes: V-Guard/Bonton /Finecab/ HPL / Million / FortuneArt /Sudhakar/Orbit/ Tamra/Anchor /Plaza/ Vihan/Spykaar/ Ollvin/Laser/Beljin/Rhino/ Standard/ Vimal

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply of Automatic Street Light Control System with Optical Micro Sensor, Low volatage / High voltage trip and reset, operating voltage 150 - 280V AC per Phase, 50 HZ with suitable SMC enclousure of IP 54 protection, MCBs and contactor suitable to control the load of 5 KW of Three phase load with necessary clamping arrangements. Make: Swadeep Nature Switch / Light Mate /GL/Bajaj

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Supply and fixing of suitable out door type feeder piller box made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work..FP MCB including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work FP MCB make :Legrand / Schnieder / L&T

Development of landscape (Hardscape) works in Nidivelagala park (5 Acres) at Nidivelagala (V), Simha;Providing Independent earthing by excavating atrench to a depth f 2.10m in ordinary soils as specified 1.50 X 0.6 to a depth of 0.9m and 1.2 X 0.6 to a depth of 1.20m ,using 40 mm dia 'B' class GI Pipe of 2.5 m long with necessary accessories with 450mm x 50 mm thick hume pipe ring duly providing staggered holes including filling with 40 kg of hard coke and 20 kg salt providing with equal proportion of in layers etc. including cost and conveyance of all materials ,overheads & contractors profit etc., complete for finished item of work