Andhra Pradesh Township And Infrastructure Development Corporation Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Township And Infrastructure Development Corporation - APTIDCO Tender
Civil And Construction
Opening Date2 Feb 2022
Closing Date14 Mar 2022
Tender Amount₹ 21,48,43,712
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
475343Bid Award Id
ViewTender No
02/APTIDCO/KNL/2021-22, DT.30-01-2022Tender Authority
Andhra Pradesh Township And Infrastructure Development Corporation ViewPurchaser Address
-Website
http://https://www.aptidco.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
s1;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
651
... More
s1;Laying & Jointing of OD 180mm Dia. DWC Pipe (150 I.D)
646
-
50201
... More
s1;GLSR Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
135.64
-
15710
... More
s1;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS-778 Class-I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
13
-
48829
... More
s1;H. The Dog Legged staircase shall be enclosed with Brick/CRS Wall on 3 sides and front side with MS collapsable gate upto 1st brace level from ground level.
-
-
-
... More
s1;GLSR Top Ring Beam
1.71
-
19754
... More
s1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
5
-
33914
... More
s1;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
-
-
-
... More
s1;Laying & Jointing of OD 180mm Dia. DWC Pipe (150 I.D)
260
-
20205
... More
s1;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work.
37.5
-
45273
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
-
-
-
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 250mm Dia. Sluice Valve. as directed by the Departmental Authorities.
1
-
733
... More
s1;Labour charges for Lowering and keeping in position of 250 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
1527
... More
s1;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory Roller 80-100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T&P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
1081.73
-
2451817
... More
s1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item work as directed by the Departmental Authorities.
-
-
-
... More
s1;D). CI/DI double Swanneck ventilators(min of 150mm dia) in topdome and slab with flyproof necks- 4No's
-
-
-
... More
s1;Culverts Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
54.6
-
6324
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn-1.0 (MPa) as directed by the Departmental Authorities
2
-
44092
... More
s1;Lintels
0.41
-
4987
... More
s1;RCC M- 20 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
307.75
-
2001261
... More
s1;Construction of 904m (3'-0") Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
35
-
373595
... More
s1;Footings
1.35
-
11844
... More
s1;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;VRCC. M20 grade Nominal mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
163.45
-
1099105
... More
s1;Supplying and fixing of approved make Automatic Star Delta Starter of make C&S/Crompton / L&T / Siemens/BCH suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
1
-
18298
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.54
-
9098
... More
s1;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1485
-
168726
... More
s1;Supply and Erection of Panel Mounting 125-A, 4 Pole, 25-KA, MCCB with thermal magnetic setting/Microprocessor based release arrangement with all connections etc., and supply of 125A 4 pole MCCB adjustable confirms to IS/IEC 60947-2 having breaking capacity 25-KA with Thermal Magnetic setting based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the dept., of make L&T/Schneider/Siemens/ Hager.
10
-
123021
... More
s1;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
30
-
203485
... More
s1;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
252
-
87326
... More
s1;Cost of OD 295mm Dia. DWC Pipe (250 I.D)
-
-
-
... More
s1;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS-778 Class-I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
6
-
22537
... More
s1;Manufacture, Supplying and delivery of OD 250mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
12716
... More
s1;Septic Tank: Earth Excavation in ordinary soil by Mechanical Means up to 3m depth with an initial lead of 10 1 MTs including all operational, incidental, labour charges etc cmplete for finished item of work excluding seigniorage excluding and dewatering charges etc as per SS-20B (APSS 308).
100
-
11582
... More
s1;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
6
-
1153
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course forPump Room.
1.61
-
6842
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 250x225 mm Dia. Reducers
10
-
25507
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn-1.0 (MPa) as directed by the Departmental Authorities
2
-
44092
... More
s1;Construction of 904m (3'-0") Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
35
-
373595
... More
s1;Laying & Jointing of OD 295mm Dia. DWC Pipe (250 I.D)
-
-
-
... More
s1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
12
-
81394
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
444.05
-
3509221
... More
s1;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
4
-
768
... More
s1;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
-
-
-
... More
s1;Supply and Erection of PANEL MOUNTING 125-A, 4 Pole, 25-KA, MCCB adjustable of make L&T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847-2 having breaking capacity 35/36-KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24600
... More
s1;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete for D/F Joints
0.9
-
95
... More
s1;Cost and supply of 175 mm dia. PVC blue casing pipe including transportation to the work site.
250
-
288750
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
466.8
-
357863
... More
s1;RCC M- 20 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
77.48
-
487716
... More
s1;A). Pipe Connections and special with DI Materials
-
-
-
... More
s1;Cost of OD 235mm Dia. DWC Pipe (200 I.D)
195
-
117199
... More
s1;Manufacture, Supplying and delivery of 250mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
4126
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
90
-
65136
... More
s1;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32210
... More
s1;J).Water level indicator of reputed make-Digital type(1.No) and conventional type(1.No)
-
-
-
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course forPump Room.
1.61
-
6770
... More
s1;Chajjas
0.04
-
555
... More
s1;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Manufacture, Supplying and delivery of OD 63mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
777
... More
s1;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
722.7
-
4564594
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 250x225 mm Dia. Reducers
10
-
25507
... More
s1;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 : 1994 of Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H-type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
1
-
47416
... More
s1;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities
-
-
-
... More
s1;Labour charges for Lowering and keeping in position of 250 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
1527
... More
s1;Roof slab
1.79
-
22144
... More
s1;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
720
... More
s1;Cost of OD 120mm Dia. DWC Pipe (100 I.D)
672
-
137431
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
3.48
-
286488
... More
s1;D. RCC Ventilators with copper or Stainless steel fly proof Mesh
-
-
-
... More
s1;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
-
-
-
... More
s1;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25973
... More
s1;Cost of OD 235mm Dia. DWC Pipe (200 I.D)
150
-
90153
... More
s1;K).Lightening Arrestor with all its accessories complete including earthing with relevant IS Codes- 1No's.
-
-
-
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
8.52
-
701153
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 250mm Dia. Sluice Valve. as directed by the Departmental Authorities.
2
-
697
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn-1.0 (MPa) as directed by the Departmental Authorities
2
-
44092
... More
s1;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
29.91
-
6890
... More
s1;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete for D/F Joints
3.6
-
380
... More
s1;Lintels
0.41
-
4971
... More
s1;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5'-6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 21 MTs, length using GI bolts&nuts and fixing earth wire including supply and fixing 1'-6'' dia 0'-8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4302
... More
s1;Manufacture, Supplying and delivery of OD 250mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1
-
5508
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete forr 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
-
-
-
... More
s1;Storm water drains Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
2466.8
-
285705
... More
s1;Supply & Fixing of 180mm dia. PVC Bore Cap
10
-
3150
... More
s1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
4
-
27131
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
-
-
-
... More
s1;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes.
4
-
10389
... More
s1;H).RCC Valve chambers as per standard Drawings with RCC Cover slab fixed with CI/DI man hole frame & cover with lock and key arrangment. The Mix shall not be less than VRCC M 20 grade with 150mm thick side walls,150mm thick top slab,150mm thick base slab over base course of 100mm thick(1:4:8) prop.
-
-
-
... More
s1;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
231
-
26754
... More
s1;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values.
1000
-
126100
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
4
-
1346
... More
s1;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;C).Man Hole frames and covers made with CI/DI material with minimum size of 0.6X0.6- for roof and valve chambers.
-
-
-
... More
s1;Supply and Transportation of 5 HP, 5-10 Stage, 5 star rated vertical Submersible Motor Pumpset, confirming to IS.8034 and motor confirming to IS.9283 with water proof winding, Pump shall be suitable for various delivery dead and dischage with stainles steel shaft, Motor suitable for wrking on 415V (+)/(-) 10%, Three Phase 50 Hz AC supply, etc., complete for 6" Bore Well. Makes: Kirloskar/Crompton/Texmo/ CRI/KSB/Lubi/PSG/ Aryen Varsha
10
-
457989
... More
s1;3.2.Outlet Pipe:- 350mm dia
-
-
-
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
12
-
3970
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.54
-
12778
... More
s1;Brick Masonry in C.M.(1:6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
6.44
-
40214
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
567.74
-
4357138
... More
s1;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
1527
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Key Walls and Block approaches
33.12
-
140710
... More
s1;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
2
-
1507
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
4
-
1946
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for GLSR
7.54
-
32017
... More
s1;Laying & Jointing ofOD 120mm Dia. DWC Pipe (100 I.D)
259
-
16949
... More
s1;GLSR SIDE WALLS.
13.83
-
222003
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.73
-
59749
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
13.65
-
76504
... More
s1;Footings
1.35
-
12118
... More
s1;Cost of OD 235mm Dia. DWC Pipe (200 I.D)
346
-
207953
... More
s1;Laying & Jointing ofOD 120mm Dia. DWC Pipe (100 I.D)
-
-
-
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
2.73
-
11598
... More
s1;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities
-
-
-
... More
s1;Supply and Erection of PANEL MOUNTING 125-A, 4 Pole, 25-KA, MCCB adjustable of make L&T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847-2 having breaking capacity 35/36-KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
1
-
12300
... More
s1;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
1485
-
49525
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 200x180 mm Dia. Reducers
5
-
7618
... More
s1;Manufacture, Supplying and delivery of OD 110mm x 125mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;GLSR Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
135.64
-
15710
... More
s1;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
-
-
-
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete.
37.5
-
169654
... More
s1;3.1.Innlet Pipe:- 300mm dia
-
-
-
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
26.4
-
2172012
... More
s1;Plinth Beam
0.63
-
7173
... More
s1;Supplying and fixing of approved make Semi Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.
10
-
183011
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Key Walls.
6.21
-
49354
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
15.47
-
82362
... More
s1;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work.
75
-
123318
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete.
75
-
335523
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.54
-
12391
... More
s1;I).Balacony of 1.00m width at floor slab level/middle ring beam level by using Stainless steel pipe of grade 304 hand railing upto 1.20m height, with top railing of 40.mm dia pipe & middle railing of 25mm dia and verticals with 40mm dia. at an interval not more than of 1.00m c/c.
-
-
-
... More
s1;3. All Specials such as Bends Tees,Reducers,Duck foot Bends, Bell mouths etc., shall be of DI material. Sizes of vertical pipe connections are:
-
-
-
... More
s1;Manufacture, Supplying and delivery of OD 110mm x 125mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 : 1994 of Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H-type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
94831
... More
s1;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
-
-
-
... More
s1;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
360
... More
s1;Septic Tank Excavation in ordinary soil by Mechanical Means up to 3m depth with an initial lead of 10 1 MTs including all operational, incidental, labour charges etc cmplete for finished item of work excluding seigniorage excluding and dewatering charges etc as per SS-20B (APSS 308).
125
-
14478
... More
s1;1. All pipe connections for Inlet,Outlet,OverFlow,Scour pipes shall be provided with D/F DI Material
-
-
-
... More
s1;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
24.84
-
161532
... More
s1;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
432
-
49084
... More
s1;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
2886.96
-
334368
... More
s1;Culverts Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
87.36
-
10118
... More
s1;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
3506.62
-
406137
... More
s1;Laying & Jointing of OD 295mm Dia. DWC Pipe (250 I.D)
257
-
51508
... More
s1;Lowering, Laying and Jointing of 250mm Dia. HDPE Pipes by butt fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete for finished item of work as directed by the Department authorities
1704
-
200356
... More
s1;Storm water drains Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
1925
-
222954
... More
s1;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
1104
-
75768
... More
s1;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;3.5.DI Valves:- 2No's
-
-
-
... More
s1;ELSR: Constuction of OHSR / ELSR of 300 KL capacity with staging of 221 MTs. including fixtures and all the Concrete members shall be designed with M30 grade design mix with Raft Footings including 3 Coats of eppoxy paint food grade of best quality to inner surface of reservoir including roof and 2 Coats of weather proof emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Bends,Valves etc., for pipe connections excluding cost of pipes Bends and Valves as per departmental designs and drawings but including cost and conveyance of all materials to work site and the above rate inclusive of following fixtures:
300
-
8769000
... More
s1;Effluent Lines Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities
-
-
-
... More
s1;Labour charges for Lowering and keeping in position of 200 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
-
-
-
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
268.36
-
441258
... More
s1;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
8
-
609
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
4
-
1527
... More
s1;2.The valves for above pipe connections also shall be of DI material of PN 16 Duty confirming to the specifications of SoR item No.28
-
-
-
... More
s1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
82.83
-
29749
... More
s1;C. Providing lightening arrester including conductor and earthing etc., complete-1No's
-
-
-
... More
s1;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc., and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)
1.5
-
5008
... More
s1;GLSR Top dome Slab
1.62
-
25810
... More
s1;Laying & Jointing ofOD 235mm Dia. DWC Pipe (200 I.D)
310
-
39730
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
20.47
-
33666
... More
s1;Laying & Jointing of OD 295mm Dia. DWC Pipe (250 I.D)
425
-
85179
... More
s1;Pump Room Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.58
-
762
... More
s1;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
6
-
1153
... More
s1;Manufacture, Supplying and delivery of OD 63mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
6
-
1166
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn-1.0 (MPa)
6
-
85034
... More
s1;Dhone physical infrastructure ROADS : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
2227.27
-
257962
... More
s1;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes.
4
-
10389
... More
s1;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
1350.96
-
156469
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
286
-
1202255
... More
s1;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32210
... More
s1;RCC M- 20 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
240
-
2111133
... More
s1;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities
-
-
-
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
34.23
-
2816005
... More
s1;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
2
-
1507
... More
s1;Manufacture, Supplying and delivery of OD 140mm x 160mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;DOOR of SIZE 0.90 x 2.00 m:- Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS-513, galvanized as per IS-277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with :: (a) 2mm thick MS powder coated butt hinges of 100mm long - 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos - 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners - 6 Nos. with split end tail (d) Nylon Aldrops Receiver - 1 No. for Single shutter frame (e) Tie Road - 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7689
... More
s1;Manufacture, Supplying and delivery of OD 110mm x 125mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;0.60 x 0.90 m Window::- Providing and Fixing of openable windows made of Pre-painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5-7 microns thick. finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3523
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 150mm Dia. , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn-1.0 (MPa) as directed by the Departmental Authorities
2
-
44092
... More
s1;Manufacture, Supplying and delivery of OD 250mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
6358
... More
s1;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
1260
-
86474
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn-1.0 (MPa)
6
-
85034
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing, seigniorage charges and all other taxes etc., complete.
30
-
127454
... More
s1;GLSR Top dome Slab
2.26
-
36025
... More
s1;Columns
0.59
-
7166
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Key Walls and Block approaches
292.56
-
1308808
... More
s1;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
2.71
-
212146
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for GLSR
7.54
-
33713
... More
s1;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
25
-
21644
... More
s1;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Construction of granular sub-base by providing well graded material for grading-III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as directed by the Departmental Authorities
593.93
-
707489
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 250mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn-1.0 (MPa) as directed by the Departmental Authorities
2
-
72961
... More
s1;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
3731.2
-
24308693
... More
s1;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
82.83
-
19085
... More
s1;GLSR SIDE WALLS.
13.83
-
218647
... More
s1;Roof Beams
0.63
-
6967
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for GLSR
7.54
-
29959
... More
s1;Supplying and Run of 4 of 56/0.3mm (4.0 Sq.mm.) insulated flexible copper cable of Gold medal/ standard/million/suncab make in the existing metalic/Non metalic conduit pipe including all materials and all labour charges etc., complete for Motors connection.
1950
-
409955
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
3504
... More
s1;Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc., and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)
1.5
-
5034
... More
s1;GLSR Top Ring Beam
1.71
-
20096
... More
s1;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
76
... More
s1;Columns
0.59
-
7023
... More
s1;Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc., and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)
1.5
-
4713
... More
s1;Supplying and fixing of approved make Automatic Star Delta Starter of make C&S/Crompton / L&T / Siemens/BCH suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36595
... More
s1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
7
-
47480
... More
s1;Random Rubble stone masonry in CM (1:8) prop: (Cement: Screened sand) using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site, including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc., and overheads & contractors profit complete for finished item of work in foundation and basement. (APSS No. 601 & 615)
1.5
-
4748
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
3.1
-
254777
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 160x140 mm Dia. Reducers
10
-
8533
... More
s1;GLSR SIDE WALLS.
13.83
-
221453
... More
s1;Manufacture, Supplying and delivery of OD 140mm x 160mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
13.65
-
61065
... More
s1;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
535
-
17842
... More
s1;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5'-6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 21 MTs, length using GI bolts&nuts and fixing earth wire including supply and fixing 1'-6'' dia 0'-8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4302
... More
s1;Yemmiganur physical infrastructure ROADS : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
5480.33
-
634732
... More
s1;Supplying and fixing of 65mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for finished item of work for connection to GLSR
5750
-
5167494
... More
s1;GLSR Bottom Slab
11.86
-
81387
... More
s1;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
121.83
-
61485
... More
s1;Brick Masonry in C.M.(1:6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
6.44
-
40111
... More
s1;Brick Masonry in C.M.(1:6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
6.44
-
40541
... More
s1;Effluent Lines Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities
-
-
-
... More
s1;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
1011.24
-
117122
... More
s1;Laying & Jointing of OD 180mm Dia. DWC Pipe (150 I.D)
1275.73
-
99137
... More
s1;Laying & Jointing of OD 180mm Dia. DWC Pipe (150 I.D)
1000
-
77710
... More
s1;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
290.64
-
350882
... More
s1;Flooring with polished Shahabad slabs of 15mm to 18mm thick set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
7.5
-
4748
... More
s1;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
339.6
-
39332
... More
s1;0.60 x 0.90 m Window::- Providing and Fixing of openable windows made of Pre-painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5-7 microns thick. finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3523
... More
s1;Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for 4kg potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.
24
-
6081
... More
s1;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS-778 Class-I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
25
-
93903
... More
s1;Construction of un-reinforced, design mix M 30 grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., curing of concrete slabs for 14- days as per Design & drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
274.28
-
1696721
... More
s1;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25973
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Key Walls.
30.02
-
230389
... More
s1;RCC M- 20 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities for precast slab for drain.
240
-
1450164
... More
s1;180mm dia. PVC Casing pipe perculation charge
250
-
85500
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 160x140 mm Dia. Reducers
10
-
8533
... More
s1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
40
-
271313
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for GLSR
7.54
-
31679
... More
s1;Tie beam shall be provided above the brick work with 230X200mm size, fixed with MS angular of 25mm X25mmX4mm in "Y" Shape to height of 0.60m, with embedded length of 150mm in concrete.The braded wire fencing with 3 ply of 18 guages shall be streched in 4 rows(2X2).Plastering shall be done with 16mm thick in two coatsi.e., base coat 12mm thick in CM(1:6)prop and 4mm thick 2nd coat CM(1:4)prop on both sides of brick work.
-
-
-
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
8
-
2646
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 160x180 mm Dia. Reducers
10
-
11793
... More
s1;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
1.11
-
86532
... More
s1;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 : 1994 of Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H-type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
94831
... More
s1;Construction of granular sub-base by providing well graded material for grading-III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as directed by the Departmental Authorities
3134.85
-
4840208
... More
s1;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32210
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
103.3
-
438868
... More
s1;Laying & Jointing ofOD 235mm Dia. DWC Pipe (200 I.D)
346
-
44343
... More
s1;0.60 x 0.90 m Window::- Providing and Fixing of openable windows made of Pre-painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5-7 microns thick. finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3523
... More
s1;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
252
-
11569
... More
s1;snowcern pain in two coats shall be provided for both sides of wall. The M.S ornamental gate as per the approved drawings shall be provided with minimum of 3.601 MTs widthe and 2.401 MTs height with enamel paint.Yard lighting shall be arranged on four corners of compound wall. If the length of the wall is increased/decreased.
-
-
-
... More
s1;DOOR of SIZE 0.90 x 2.00 m:- Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS-513, galvanized as per IS-277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with :: (a) 2mm thick MS powder coated butt hinges of 100mm long - 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos - 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners - 6 Nos. with split end tail (d) Nylon Aldrops Receiver - 1 No. for Single shutter frame (e) Tie Road - 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7689
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Key Walls and Block approaches
118.69
-
471847
... More
s1;G). Doglegged stair case of 1m flight width and 1.2m landing width and RCC hand railing of 1m height-1No's (The Dog Legged staircase shall be enclosed with Brick/CRS Wall on 3 sides and front side with MS collapsable gate upto 1st brace level from ground level.)
-
-
-
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
1.06
-
1747
... More
s1;F.Water level indicator of good quality with abonite/Copper float approved pattern-1.No's
-
-
-
... More
s1;Cost and supply of 175 mm dia. PVC blue casing pipe including transportation to the work site.
250
-
288750
... More
s1;Manufacture, Supplying and delivery of 250mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;DOOR of SIZE 0.90 x 2.00 m:- Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS-513, galvanized as per IS-277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with :: (a) 2mm thick MS powder coated butt hinges of 100mm long - 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos - 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners - 6 Nos. with split end tail (d) Nylon Aldrops Receiver - 1 No. for Single shutter frame (e) Tie Road - 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7689
... More
s1;Manufacture, Supplying and delivery of OD 250mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
12716
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn-1.0 (MPa)
4
-
56689
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
103.3
-
554777
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
2
-
2913
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
3.56
-
292868
... More
s1;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
2
-
1004
... More
s1;GLSR SIDE WALLS.
14.08
-
228865
... More
s1;Cost of OD 180mm Dia. DWC Pipe (150 I.D)
646
-
234866
... More
s1;Lowering, Laying and Jointing of 250mm Dia. HDPE Pipes by butt fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete for finished item of work as directed by the Department authorities
192
-
22575
... More
s1;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
1527
... More
s1;Cost of OD 180mm Dia. DWC Pipe (150 I.D)
1000
-
363570
... More
s1;Forming embankment with 50% of Gravel and 50% of Sand by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities
1028.57
-
319915
... More
s1;Plinth Beam
0.63
-
7326
... More
s1;Pump Room Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.58
-
762
... More
s1;Cost of OD 120mm Dia. DWC Pipe (100 I.D)
-
-
-
... More
s1;Flooring with polished Shahabad slabs of 15mm to 18mm thick set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
7.5
-
4709
... More
s1;Supplying and Run of U/S Circuit Mains by mean run of 4 of 56/0.3mm (4.00Sqmm) FRLS/HFFR/ ZHFR pvc insulated 1100V grade as per IS.694/1990 specification for Copper Wire make KEI/ Polycab/Havells/GM/Gold Medal/Million/HPL/Power Flex/RPG/Anchor/Great White/Sun Cab/ Fortune Art/Great white/Orbit/V-Guard in the existing metalic/Non metalic conduit pipe for run of mains including all labour charges etc,complete and as directed by the Departmental authorities
50
-
10509
... More
s1;G. The Railing provided to gallery and staircase shall be with stainless steel of grade 304 for height of 1.2m
-
-
-
... More
s1;Chajjas
0.04
-
546
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 250mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn-1.0 (MPa) as directed by the Departmental Authorities
1
-
36481
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 250mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn-1.0 (MPa) as directed by the Departmental Authorities
2
-
72961
... More
s1;Roof Beams
0.63
-
7095
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
154.95
-
262742
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn-1.0 (MPa) as directed by the Departmental Authorities
-
-
-
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete forr 200mm Dia. Sluice Valve as directed by the Departmental Authorities.
-
-
-
... More
s1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
82.83
-
29031
... More
s1;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities
-
-
-
... More
s1;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;A. RCC or Aluminum ladder inside 0.60 m wide
-
-
-
... More
s1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, seignorage on all materials and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification.(FOR Valve Pits) as directed by the Departmental Authorities.
12
-
81394
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 100mm Dia. , including cost and conveyance of all materials to work site, loading, unloading traansportation charges and excluding all other connected taxes etc., complete.(pn-1.0 (MPa)
-
-
-
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course forPump Room.
1.61
-
7204
... More
s1;Supplying and Run of U/S Circuit Mains by mean run of 4 of 56/0.3mm (4.00Sqmm) FRLS/HFFR/ ZHFR pvc insulated 1100V grade as per IS.694/1990 specification for Copper Wire make KEI/ Polycab/Havells/GM/Gold Medal/Million/HPL/Power Flex/RPG/Anchor/Great White/Sun Cab/ Fortune Art/Great white/Orbit/V-Guard in the existing metalic/Non metalic conduit pipe for run of mains including all labour charges etc,complete and as directed by the Departmental authorities
50
-
10508
... More
s1;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
116.66
-
59989
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
21.84
-
86824
... More
s1;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5'-6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 21 MTs, length using GI bolts&nuts and fixing earth wire including supply and fixing 1'-6'' dia 0'-8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4302
... More
s1;Construction of un-reinforced, design mix M 30 grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., curing of concrete slabs for 14- days as per Design & drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
108.68
-
616538
... More
s1;Laying & Jointing ofOD 235mm Dia. DWC Pipe (200 I.D)
150
-
19224
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
2.73
-
14662
... More
s1;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
1527
... More
s1;VRCC. M20 grade Nominal mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work..
222.18
-
1485151
... More
s1;Plinth Beam
0.63
-
7452
... More
s1;Supply and Erection of PANEL MOUNTING 125-A, 4 Pole, 25-KA, MCCB adjustable of make L&T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847-2 having breaking capacity 35/36-KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24600
... More
s1;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
82.83
-
19082
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
35.1
-
286862
... More
s1;Supplying and Run of U/S Circuit Mains by mean run of 4 of 56/0.3mm (4.00Sqmm) FRLS/HFFR/ ZHFR pvc insulated 1100V grade as per IS.694/1990 specification for Copper Wire make KEI/ Polycab/Havells/GM/Gold Medal/Million/HPL/Power Flex/RPG/Anchor/Great White/Sun Cab/ Fortune Art/Great white/Orbit/V-Guard in the existing metalic/Non metalic conduit pipe for run of mains including all labour charges etc,complete and as directed by the Departmental authorities
25
-
5254
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 200x180 mm Dia. Reducers
10
-
15236
... More
s1;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values.
1000
-
126100
... More
s1;Ayyalurimetta physical infrastructure ROADS : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
12097.07
-
1401083
... More
s1;Columns
0.59
-
7143
... More
s1;Roof slab
1.79
-
21784
... More
s1;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS-778 Class-I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
53
-
199074
... More
s1;3.4.Scour Pipe:- 200mm dia
-
-
-
... More
s1;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values.
6
-
757
... More
s1;I.DI Swan neck ventilators in topdome and slab.
-
-
-
... More
s1;Construction of 904m (3'-0") Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
36
-
384269
... More
s1;Water Supply : Manufacture, Supplying and delivery of OD 250mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1704
-
3043395
... More
s1;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities
-
-
-
... More
s1;Painting to Doors and M.S.Grills with primer and two coats with Synthetic enamel paint in all shades of Grade-I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
2.34
-
425
... More
s1;Manufacture, Supplying and delivery of OD 140mm x 160mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.73
-
59749
... More
s1;Earthwork in excavation as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities for pipe line trench work
2214.68
-
256504
... More
s1;3.3.Overflow Pipe:- 300mm dia
-
-
-
... More
s1;GLSR Top Ring Beam
1.71
-
19686
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 160x180 mm Dia. Reducers
10
-
11793
... More
s1;Plinth Beam
0.63
-
7300
... More
s1;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
39.74
-
240147
... More
s1;GLSR Top Ring Beam
1.71
-
19339
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
204.44
-
246818
... More
s1;Labour charges for Lowering and keeping in position of 250 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
763
... More
s1;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
12
-
2345
... More
s1;Pump Room Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.58
-
762
... More
s1;Flooring with polished Shahabad slabs of 15mm to 18mm thick set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
7.5
-
4669
... More
s1;
-
-
-
... More
s1;Storm water drains Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
5124
-
593462
... More
s1;Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
1527
... More
s1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item work as directed by the Departmental Authorities.
-
-
-
... More
s1;Lintels
0.41
-
4887
... More
s1;Manufacture, Supplying and delivery of OD 250mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1
-
5508
... More
s1;Chajjas
0.04
-
535
... More
s1;Manufacture, Supplying and delivery of OD 160mm x 200mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Supply and Transportation of 5 HP, 5-10 Stage, 5 star rated vertical Submersible Motor Pumpset, confirming to IS.8034 and motor confirming to IS.9283 with water proof winding, Pump shall be suitable for various delivery dead and dischage with stainles steel shaft, Motor suitable for wrking on 415V (+)/(-) 10%, Three Phase 50 Hz AC supply, etc., complete for 6" Bore Well. Makes: Kirloskar/Crompton/Texmo/ CRI/KSB/Lubi/PSG/ Aryen Varsha
10
-
457989
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
4.09
-
6944
... More
s1;Footings
1.35
-
12172
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
2
-
2913
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors. (payment will be made on the basis of wieght of fabrication deformed bars only. No re-rolled steel shall be allowed complete for 8mm to 40mm).
10.21
-
839762
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1260
-
911900
... More
s1;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
432
-
14407
... More
s1;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
116.66
-
58482
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Key Walls.
54.86
-
448314
... More
s1;Lowering, Laying and Jointing of 250mm Dia. HDPE Pipes by butt fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete for finished item of work as directed by the Department authorities
324
-
38096
... More
s1;Painting to Doors and M.S.Grills with primer and two coats with Synthetic enamel paint in all shades of Grade-I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
2.34
-
400
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.73
-
59749
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
3.51
-
288974
... More
s1;Effluent Lines Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities
-
-
-
... More
s1;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes.
4
-
10389
... More
s1;Construction of granular sub-base by providing well graded material for grading-III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as directed by the Departmental Authorities
1081.73
-
1554414
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
56.16
-
431002
... More
s1;Roof Beams
0.63
-
7247
... More
s1;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
2
-
1004
... More
s1;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete for D/F Joints
0.9
-
95
... More
s1;Lowering, Laying and Jointing of 250mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
3204
-
376726
... More
s1;Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete for D/F Joints
0.9
-
95
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
4.37
-
359685
... More
s1;Supply and Erection of Panel Mounting 125-A, 4 Pole, 25-KA, MCCB with thermal magnetic setting/Microprocessor based release arrangement with all connections etc., and supply of 125A 4 pole MCCB adjustable confirms to IS/IEC 60947-2 having breaking capacity 25-KA with Thermal Magnetic setting based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the dept., of make L&T/Schneider/Siemens/ Hager.
10
-
123021
... More
s1;Cost of OD 295mm Dia. DWC Pipe (250 I.D)
-
-
-
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
47.25
-
80120
... More
s1;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS-5312 (Pts.1&2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
504
-
364760
... More
s1;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
223.88
-
368106
... More
s1;Compound Wall: Construction of compound wall including ornamental M.S Gate of Size of 3.0X 2.40m is included in the basic rate of ELSRs.length of compound wall hall is maximum of 150m Min. height of the compound wall shall be 1.80m above plinth and thickness 230mm in brick masonry in CM(1:6).The compound wall shall be constructed including earth work excavation in all types of soils for plinth beam of 230mmX300mm and 0.75X0.75X1.20m size fo coloumn footing portions.The footing shall be of 0.75X0.75X0.25m in VRCC M20 grade and constructed over a C.C(1:4:8)prop bed of100mm thick.The coloumns shall be 230X230 mm in size with VRCC M20 Grade at 3.00m c/c spacing having depth of size of 1.20m below ground level and height of 2.00m above GL.The plinth beam of size of 230X300mm shall be constructed in VRCC M20 grade at ground level, over a bed of CC(1:4:8)-100mm thick.450X450mm size coloumns in M20Grade shall be constructed for gate pillars.All the materials shall be followed as per the standards
-
-
-
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
149.7
-
114765
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Key Walls.
30.02
-
237241
... More
s1;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
-
-
-
... More
s1;Manufacture, Supplying and delivery of OD 63mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
777
... More
s1;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
2
-
1004
... More
s1;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
28.15
-
247636
... More
s1;Labour charges for Lowering and keeping in position of 250 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work.excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
1527
... More
s1;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
29.91
-
6890
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors. (payment will be made on the basis of wieght of fabrication deformed bars only. No re-rolled steel shall be allowed complete for 8mm to 40mm).
25.27
-
2079405
... More
s1;Cost of OD 180mm Dia. DWC Pipe (150 I.D)
1275.73
-
463817
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
1.06
-
1283
... More
s1;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory Roller 80-100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T&P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
1610.36
-
3273234
... More
s1;Supply and placing of the Design Mix Concrete M30 grade for RCC works corresponding to IS 456 using Concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water to site, all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges and seignorage charges for finished item of work and as directed by the Departmental authorities.
-
-
-
... More
s1;Footings
1.35
-
12442
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 160x180 mm Dia. Reducers
5
-
5897
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
429
-
517920
... More
s1;Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
12
-
2345
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 250x225 mm Dia. Reducers
5
-
12753
... More
s1;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
2448
-
848305
... More
s1;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
720
... More
s1;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
29.91
-
6890
... More
s1;GLSR Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
135.64
-
15710
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
402
-
2253093
... More
s1;VRCC. M20 grade Nominal mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm and 12.50mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work..
359.68
-
2490588
... More
s1;Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for 4kg potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.
24
-
6081
... More
s1;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
685.6
-
79406
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
7.54
-
5777
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course forPump Room.
1.61
-
6402
... More
s1;Manufacture, Supplying and delivery of 160mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
720
... More
s1;180mm dia. PVC Casing pipe perforation charge
250
-
85500
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 250x225 mm Dia. Reducers
10
-
25507
... More
s1;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities
-
-
-
... More
s1;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
1
-
326
... More
s1;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
4.97
-
31272
... More
s1;Storm water drains Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
729.35
-
84473
... More
s1;Roof Beams
0.63
-
7120
... More
s1;Manufacture, Supplying and delivery of 250mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
2063
... More
s1;Supplying and fixing of approved make Automatic Star Delta Starter of make C&S/Crompton / L&T / Siemens/BCH suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete and as directed by the Departmental authorities
2
-
36595
... More
s1;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
651
... More
s1;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
2
-
1507
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
39.78
-
314372
... More
s1;GLSR Top dome Slab
1.62
-
25417
... More
s1;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
1272
-
58398
... More
s1;Laying & Jointing ofOD 120mm Dia. DWC Pipe (100 I.D)
-
-
-
... More
s1;Culverts Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
61.88
-
7167
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
311.2
-
1237163
... More
s1;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
1298.8
-
8100524
... More
s1;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS-5312 (Pts.1&2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors. (payment will be made on the basis of wieght of fabrication deformed bars only. No re-rolled steel shall be allowed complete for 8mm to 40mm).
18.71
-
1539454
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 250mm Dia. Sluice Valve. as directed by the Departmental Authorities.
2
-
1478
... More
s1;Geological Survey charges excluding taxes for Plain Area
10
-
13000
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 200x180 mm Dia. Reducers
10
-
15236
... More
s1;Painting to Doors and M.S.Grills with primer and two coats with Synthetic enamel paint in all shades of Grade-I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
2.34
-
425
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
1.06
-
1802
... More
s1;Manufacture, Supplying and delivery of OD 250mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading,forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
1
-
6358
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., Complete as directed by the Departmental Authorities
2
-
2913
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
26.4
-
2172012
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Key Walls and Block approaches
160.09
-
672969
... More
s1;Bore Well: Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely.
1600
-
2176000
... More
s1;Supplying and fixing of approved make Semi Automatic Star Delta Starter fitted in CRCA sheet enclosure suitable for 3 Phase, 415-V, 50 Hz Motor Pump set, suitable for 7.50 HP to 12.50 HP automatic Star Delta Starter Motor totally enclosed with over load protection and No-volt relay to complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete.
10
-
183011
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
7.02
-
55792
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
23.2
-
28015
... More
s1;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
116.66
-
60119
... More
s1;Manufacture, Supplying and delivery of OD 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
-
-
-
... More
s1;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
8
-
609
... More
s1;Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for 4kg potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.
24
-
6081
... More
s1;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
884.25
-
1453925
... More
s1;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
1771.8
-
10634078
... More
s1;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS-5312 (Pts.1&2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;E).RCC Finial ventilator with fly/bird protection with GI Mesh-1No's DI Manhole frame and cover 0.6 X 0.6m as per IS specfications(Light duty)-2No's.
-
-
-
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
3.48
-
286488
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 160x140 mm Dia. Reducers
10
-
8532
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.55
-
44961
... More
s1;Forming embankment with 50% of Gravel and 50% of Sand by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities
2008.77
-
717211
... More
s1;Supply and placing of the Design Mix Concrete M30 grade for RCC works corresponding to IS 456 using Concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water to site, all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges and seignorage charges for finished item of work and as directed by the Departmental authorities.
-
-
-
... More
s1;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 : 1994 of Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarshaof suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H-type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
2
-
94831
... More
s1;Bore Well: Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe/175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burled channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebuIlled pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, damps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per 1SI specification used for rotary tube well. The pebbled gravel acking should be carried out in such a way that the theoretical quantity consumed completely.
1200
-
1632000
... More
s1;Roof slab
1.79
-
21349
... More
s1;Manufacture, Supplying and delivery of OD 140mm x 160mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Lowering and keeping in position of 150 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
2
-
651
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn-1.0 (MPa) as directed by the Departmental Authorities
-
-
-
... More
s1;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in all soils upto 5'-6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 21 MTs, length using GI bolts&nuts and fixing earth wire including supply and fixing 1'-6'' dia 0'-8'' depth hume pipe ring and refilling the pit with 40 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work and as directed by the Departmental authorities
1
-
4302
... More
s1;Construction of 904m (3'-0") Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 50 Kg/Sq.Cm.including plastering with CM(1:3)Prop., 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 1524mm (5'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work, and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
11
-
117415
... More
s1;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work.
30
-
50870
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1104
-
798998
... More
s1;Supplying and Run of 4 of 56/0.3mm (4.0 Sq.mm.) insulated flexible copper cable of Gold medal/ standard/million/suncab make in the existing metalic/Non metalic conduit pipe including all materials and all labour charges etc., complete for Motors connection.
1950
-
409955
... More
s1;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities
-
-
-
... More
s1;Manufacture, Supplying and delivery of OD 63mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
6
-
1166
... More
s1;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
82.83
-
19082
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
1.06
-
815
... More
s1;B. Doglegged stair case shall be provided with stair case flight with of 1.2m and landing width of 1.2m with SS railing upto 1m height
-
-
-
... More
s1;Forming embankment with 50% of Gravel and 50% of Sand by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities
5602.06
-
4033091
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
3504
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
2.73
-
224803
... More
s1;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
504
-
34590
... More
s1;Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 100 mm Dia. conforming to IS-5312 (Pts.1&2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Construction of 904.0 m (3'-0")Dia. Solid block Masonry INSPECTION CHAMBER as per IS.4111, Part-I-1986 with CM(1:6)Prop. Fly-Ash blocks of 225mm thick from approved source having a minium crushing strength of 10 N/Sq. mm. Including plastering with CM(1:3)Prop. 1/2" thick both inside and outside and fitted with 20" Dia. RCC Manhole Covers and Frames including excavating pits upto a depth of 904.00 mm (3'-0") in all sorts of soils (excluding rock) and laying CC(1:4:8) Prop. 150mm thick using 40mm HBG metal and PCC(1:2:4)Prop. benching and channel 100mm thick as per standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site of work and all operational, incidental, labour charges like mixing cement mortar, construcing masonry, lift charges, curing etc., complete for finished item of work as per standard specification as directed by the Departmental authorities
35
-
237399
... More
s1;Supplying and fixing of 65mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for finished item of work for connection to GLSR
5750
-
5167494
... More
s1;GLSR Top dome Slab
1.62
-
26134
... More
s1;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
30
-
25973
... More
s1;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
2448
-
112388
... More
s1;Lintels
0.41
-
5070
... More
s1;Cost of OD 295mm Dia. DWC Pipe (250 I.D)
425
-
398361
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
21.84
-
111091
... More
s1;Manufacture, Supplying and delivery of OD 110mm x 125mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Construction of un-reinforced, design mix M 30 grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., curing of concrete slabs for 14- days as per Design & drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
31.05
-
184877
... More
s1;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory Roller 80-100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T&P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
3093.6
-
7353333
... More
s1;Manufacture, Supplying and delivery of 200mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Allagadda physical infrastructure ROADS : Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
4284.66
-
496249
... More
s1;Water Supply : Manufacture, Supplying and delivery of OD 250mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
3204
-
5722440
... More
s1;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
357.34
-
273951
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
311.2
-
1582950
... More
s1;Supply and placing of the Design Mix Concrete M30 grade for RCC works corresponding to IS 456 using Concrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water to site, all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges and seignorage charges for finished item of work and as directed by the Departmental authorities.
-
-
-
... More
s1;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
105
-
32210
... More
s1;Laying & Jointing of OD 295mm Dia. DWC Pipe (250 I.D)
-
-
-
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
15.47
-
65031
... More
s1;Laying & Jointing ofOD 120mm Dia. DWC Pipe (100 I.D)
672
-
43976
... More
s1;Cost of OD 295mm Dia. DWC Pipe (250 I.D)
257
-
240891
... More
s1;Water Supply : Manufacture, Supplying and delivery of OD 250mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
192
-
342918
... More
s1;Filling with Sand with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities for pipeline bed.
33.96
-
57584
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 150mm Dia. Sluice Valve. as directed by the Departmental Authorities.
4
-
1945
... More
s1;GLSR Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
135.64
-
15710
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 160x140 mm Dia. Reducers
5
-
4266
... More
s1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
82.83
-
29236
... More
s1;GLSR Bottom Slab
11.86
-
81252
... More
s1;Chajjas
0.04
-
544
... More
s1;Cost of OD 180mm Dia. DWC Pipe (150 I.D)
260
-
94528
... More
s1;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities
-
-
-
... More
s1;Manufacture, Supplying and delivery of 250mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
4
-
4126
... More
s1;Pump Room Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.58
-
762
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
3504
... More
s1;Water Supply : Manufacture, Supplying and delivery of OD 250mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
324
-
578674
... More
s1;Supply and Erection of PANEL MOUNTING 125-A, 4 Pole, 25-KA, MCCB adjustable of make L&T/Schneider/Siemens/Legrand/Hager confirms to IS/IEC 60847-2 having breaking capacity 35/36-KA with Thermal Magnetic setting/ Microprocessor based release arrangement with all connections etc., complete on existing Panel Board including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental Authorities.
2
-
24600
... More
s1;Geological Survey charges excluding taxes for Plain Area
10
-
13000
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538Supply and delivery of .D.I. Double Flanged Sluice Valves of 250mm Dia.including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete (pn-1.0 (MPa) as directed by the Departmental Authorities
1
-
36481
... More
s1;Construction of un-reinforced, design mix M 30 grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixer laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., curing of concrete slabs for 14- days as per Design & drawing and Technical Specification Clause 1501 MORD.(As per APDSS and as directed by the Departmental Authorities) for Block Approaches.
150.08
-
886679
... More
s1;Cost of OD 235mm Dia. DWC Pipe (200 I.D)
310
-
186316
... More
s1;Cost of OD 120mm Dia. DWC Pipe (100 I.D)
259
-
52968
... More
s1;GLSR Bottom Slab
11.86
-
78846
... More
s1;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
32.76
-
25115
... More
s1;Cost of OD 120mm Dia. DWC Pipe (100 I.D)
-
-
-
... More
s1;Laying & Jointing ofOD 235mm Dia. DWC Pipe (200 I.D)
195
-
24991
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn-1.0 (MPa) as directed by the Departmental Authorities
-
-
-
... More
s1;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE TEEs conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
2
-
3504
... More
s1;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (T1 MT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.73
-
59749
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 160x180 mm Dia. Reducers
10
-
11793
... More
s1;Manufacture, Supplying and delivery of OD 250mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
2
-
9993
... More
s1;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
589.5
-
2637211
... More
s1;Effluent Lines Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities
-
-
-
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
661.5
-
5406248
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
168.13
-
1336222
... More
s1;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by but fusion welding as per IS.7634-Part-II/1975 as amended from time to time to the alignment and gradient and testing the pipe line to the required pressure including cost and conveyance of all materials to work site and all operational, incidential and all labour charges etc., complete as directed by the Departmental Authorities.
90
-
6177
... More
s1;Manufacture, Supplying and delivery of 63mm Dia. HDPE End Caps conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.
8
-
609
... More
s1;Roof slab
1.79
-
21713
... More
s1;F).RCC Precast ladders of 0.6m width-2No's
-
-
-
... More
s1;Flooring with polished Shahabad slabs of 15mm to 18mm thick set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat, water charges etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)
7.5
-
4753
... More
s1;Manufacture, Supplying and delivery of HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities 200x180 mm Dia. Reducers
10
-
15236
... More
s1;ELSR: Constuction of OHSR / ELSR of 500 KL capacity with staging of 221 MTs. including fixtures and all the Concrete members shall be designed with M30 grade design mix with Raft Footings including 3 Coats of eppoxy paint food grade of best quality to inner surface of reservoir including roof and 2 Coats of weather proof Emulsion painting for external surfaces, lettering, all required fixtures, Pipes, Bends,Valves etc.,for pipe connections including cost of pipes Bends and Valves as per departmental designs and drawings and The ELSR shall be designed with minimum 2 Rows of Coloumns including cost and conveyance of all materials to work site and the above rate inclusive of following fixtures:
500
-
13807900
... More
s1;Manufacture, Supplying and delivery of OD 250mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1
-
5508
... More
s1;Supplying and Run of U/S Circuit Mains by mean run of 4 of 56/0.3mm (4.00Sqmm) FRLS/HFFR/ ZHFR pvc insulated 1100V grade as per IS.694/1990 specification for Copper Wire make KEI/ Polycab/Havells/GM/Gold Medal/Million/HPL/Power Flex/RPG/Anchor/Great White/Sun Cab/ Fortune Art/Great white/Orbit/V-Guard in the existing metalic/Non metalic conduit pipe for run of mains including all labour charges etc,complete and as directed by the Departmental authorities
50
-
10508
... More
s1;Supply and delivery of " Resilient Seated Soft Sealing "Gate valve (Sluice valves) with body and bonet of Ducitle Iron GGG-40/SG-400/15 or GGG 50/SG-500/7 or equivalent as per I S1865, IS:3896-2, and Wedge fully rubber line with food grade quality grade -W 270 , grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the shaft and Seals of NBR. The Valves should be Vacume tight and 100% leak proof with face to face dimensions as BS:5163 type -A/IS:14846. All the valves should be with fusion bonded electrostatic powder coating both inside and outside (Min 250 microns)-RAL5005 with Packet Less straight through body passage conforming to design standards of DIN-3202 F4/BS:5163 Type A flange drilling as per IS-1538 D.I. Double Flanged Sluice Valves of 100mm Dia. (Scour Valve) , including cost and conveyance of all materials to work site, loading, unloading transportation charges and excluding all other connected taxes etc., complete .(pn-1.0 (MPa) as directed by the Departmental Authorities
-
-
-
... More
s1;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
1.99
-
151956
... More
s1;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values.
1000
-
126100
... More
s1;Lowering and keeping in position of 100 mm Dia. Sluice valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .excluding cost of Jointing materials like bolts, nuts rubber insertion etc.,as directed by the Departmental Authorities.
-
-
-
... More
s1;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
5.71
-
446754
... More
s1;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
535
-
60787
... More
s1;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
41.8
-
9629
... More
s1;GLSR Bottom Slab
11.86
-
84098
... More
s1;Painting to new walls with approved water proof cement paint 2 coats over priming coat with approved exterior grade cement making 3 coats in all colours including cost of priming coat and cost and conveyance of all materials, labour charges etc; complete for finished item of work and as directed by the Departmental authorities
82.83
-
19082
... More
s1;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc.,complete as directed by the Departmental Authorities.
-
-
-
... More
s1;Septic Tank: Excavation in ordinary soil by Mechanical Means up to 3m depth with an initial lead of 10 1 MTs including all operational, incidental, labour charges etc cmplete for finished item of work excluding seigniorage excluding and dewatering charges etc as per SS-20B (APSS 308).
250
-
28955
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 250mm Dia. Sluice Valve. as directed by the Departmental Authorities.
2
-
1478
... More
s1;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including cost and transportation charges to work site and loading,unloading , forwarding charges, labour charges etc., complete as directed by the Departmental Authorities
1272
-
440786
... More
s1;Culverts Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
10.92
-
1265
... More
s1;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finished item of work.
2
-
1507
... More
s1;DOOR of SIZE 0.90 x 2.00 m:- Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS-513, galvanized as per IS-277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with :: (a) 2mm thick MS powder coated butt hinges of 100mm long - 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos - 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners - 6 Nos. with split end tail (d) Nylon Aldrops Receiver - 1 No. for Single shutter frame (e) Tie Road - 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7689
... More
s1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities.
82.83
-
28605
... More
s1;Labour charges for jointing Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket , filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987 including cost and conveyance of all materials etc.,complete for 100mm Dia. Sluice Valve. as directed by the Departmental Authorities.
12
-
3970
... More
s1;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
286
-
1522653
... More
s1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item work as directed by the Departmental Authorities.
-
-
-
... More
s1;Construction of granular sub-base by providing well graded material for grading-III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as directed by the Departmental Authorities
1447.35
-
1751438
... More
s1;Forming embankment with 50% of Gravel and 50% of Sand by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities
2535.01
-
1138397
... More
s1;Brick Masonry in C.M.(1:6) Prop. with Fly Ash cement solid blocks in size 290x225x140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials , and all labour charges,scaffolding, curing etc., complete with a compresive streangth not less than 50 kg/sqm for walls for Superstructure Walls as directed by the Departmental Authorities.
6.44
-
40507
... More
s1;E. DI Manhole frame and cover 0.6 X 0.6m as per IS specfications(Light duty)-2No's.
-
-
-
... More
s1;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item work as directed by the Departmental Authorities.
-
-
-
... More
s1;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory Roller 80-100 kN weight to achieve the desired density including Cost and conveyance of all materials, all hire and operational charges of T&P etc., lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH. as directed by the Departmental Authorities.
593.93
-
1195646
... More
s1;0.60 x 0.90 m Window::- Providing and Fixing of openable windows made of Pre-painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5-7 microns thick. finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3523
... More
s1;Supply & Fixing of 180mm dia. PVC Bore Cap
10
-
3150
... More
s1;Painting to Doors and M.S.Grills with primer and two coats with Synthetic enamel paint in all shades of Grade-I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
2.34
-
425
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements