Andhra Pradesh Township And Infrastructure Development Corporation Tender

Designing,Supply and Delivery of Online Alum dozing pump of capacity :- 0 - 15 Liters/ Hour max pressure 6 Kg/cm with 5MM Neylon pipe 10m E & C Make

Supply,delivery and Fixing of of 100mm dia hose pipe for suction including specials like ms flange ,ms nipple including CI foot valve and labour charges etc complete as directed by the departmental authorities.

Providing , laying, testing & Commissioning of following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees,flanges, tapers, nuts, bolts, gaskets etc., complete.Makes as directed by the Departmental Authorities.150mm Dia

Manufacture, Supply and Delivery of 160mm dia Unplasticised 6 Kgs/cm2 PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding excise duty and sales tax etc.,.

Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts,Washers, gaskets, conforming to IS 13095 of following sizes as required.Makes : As per list of recommended brands.150mm dia

Supply of 3 core 4.0 SqmmPVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 Makes : As per list of recommended brands as category I as directed by the Departmental Authorities.

Supply of 3 core 6 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990 Makes : As per list of recommended brands as category I as directed by the Departmental Authorities

Supply and delivery of D.I. Double Flanged swing check type (Reflux Valves) Non Return Valves of 150 mm Dia. conforming to IS-5312 (Pts.1&2 with amendments upto date, if any) having body, cover, door, bearing holder with D.I., Hinge pipe, Door pin, door suspension pin with stainless steel (IS.6603), body seat ring, door face ring, bearing bushes, plugs for hinge pin with leaded tin bronze (IS.318), bolts, nuts with carbon steel, gaskets with rubber, hinges with cast steel inlcuding cost and conveyance of all materials to work site and loading, unloading, transportation etc., complete as directed by the Departmental Authorities.

Fabrication ,transportation and fixing supply of wall mounted control panelboard of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T /Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.Makes : As per list of recommended brands .Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No.Single phase preventor of suitable range - 1No.32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set Voltmeter & Ammeter selector switch - 2 Nos For 20 HP with Automatic Star Delta Starter including fixing etc., complete and as directed by the Departmental authorities.

Manufacture, Supplying and delivery of 160mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.

Manufacture, Supplying and delivery of 110mm Dia. M.S. Flanges conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., complete as directed by the Departmental Authorities.

Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values as directed by the Departmental Authorities.

Supply and delivery of Rubber Packing 6mm thick including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .) for D/F Joints as directed by the Departmental Authorities.

Manufacturing and supply of MSspecials using 5mm thick ms plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths to suit the site conditions as directed by the departmental officers, including Hydraulic testing at 24 Kg/Sq cm pressure at factory including painting with epoxy in tow coats over a premary coat of red oxide including cost of MS Plates , welding rods and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with wire mesh and cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers

Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, inD.Idental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work for Water Supply Main Lines.

Filling with SAND in trenches sides of Foundations and Basements with initial lead in layeing not excuding 15cms thick consolidating each deposited layer by watering and ramming includings cost and conveyanced water to wrok site and all operational, inD.Idental, labour charges, hire charges & T& P etc., complete for finished item of work (APSS No.309 & 310).

Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.

RCC M- 20 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing,centering and shuttering etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, and as directed by the Departmental authorities

Lowering and keeping in position of 150 mm Dia. Non Return VALVE including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .

Labour charges for jointing D.I pipes and valves with flanged ends excluding cost and joints materials such as bolts, nuts rubber packing, whilte lead including filling with water conveyance and all other chrges etc.,complete for 150mm Dia. Non Return Valve.

Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities

Lowering, laying, jointing and testing to hydralic test pressure including cost of water with minimum water lead of 500m for 160mm dia UPVC pressure pipes in ready made trenches true to alignment and gradient including all sundries but excluding cost & conveyance of pipes from source of supply and jointing materials as per BIS No. 7634 - Part III - 1975 etc., complete for finished item of work and as per departmentl authorities.