Andhra Pradesh Township And Infrastructure Development Corporation Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Township And Infrastructure Development Corporation - APTIDCO Tender
Civil And Construction
Civil Works Others
Opening Date4 Mar 2022
Closing Date25 Mar 2022
Tender Amount₹ 26,75,89,973
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 30,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
484099Bid Award Id
ViewTender No
16/Dy.CTO/VSP/APTIDCO/21-22, Dated:02.03.2022Tender Authority
Andhra Pradesh Township And Infrastructure Development Corporation ViewPurchaser Address
-Website
http://https://www.aptidco.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Physical and Trunk Infra Structure for RT Works;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.
1843.76
-
3460083
... More
Physical and Trunk Infra Structure for RT Works;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
1686.7
-
9732073
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for Block approach
31.5
-
171392
... More
Physical and Trunk Infra Structure for RT Works;Filling with quarry dust for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
31.5
-
16609
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
1.32
-
108963
... More
Physical and Trunk Infra Structure for RT Works;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
0.96
-
74842
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
11504.66
-
878956
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
2107.03
-
244036
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
276.79
-
165028
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
276.79
-
1028521
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain Bed
276.79
-
1339147
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain Walls
422.34
-
3140344
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Drain slab.
234.95
-
1395791
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
17.62
-
1449756
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
2107.03
-
160977
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
69.16
-
8010
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
10.92
-
6511
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
7.28
-
27052
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities., for Culvert Bed
7.28
-
35222
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities., for Culvert Walls
18.72
-
139195
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
14.35
-
85262
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
1.15
-
94463
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
437.2
-
50637
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
27.47
-
16377
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
27.47
-
102071
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR BOTTOM SLAB.
22.97
-
148444
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR SIDE WALLS(Wall Thickness 0.2M).
30.01
-
468976
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR TOP RING BEAM. (Wall thickness 0.30 M).
2.91
-
32434
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR TOP DOME SLAB.
10.95
-
169984
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
8.02
-
659944
... More
Physical and Trunk Infra Structure for RT Works;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
237.03
-
117138
... More
Physical and Trunk Infra Structure for RT Works;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls
120.45
-
27747
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with 8mm Dia. nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finiahed item of work.
2
-
1507
... More
Physical and Trunk Infra Structure for RT Works;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 : 1994 of category 1 Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarsha of suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H-type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
4
-
189662
... More
Physical and Trunk Infra Structure for RT Works;Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarsha of suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H-type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
100
-
21016
... More
Physical and Trunk Infra Structure for RT Works;Supply of 125A 4 Pole MCCB, Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted of category I Makes :Makes: L&T- D shine / Schneider-CVS/Legrand -DP X3/ Siemens- 3VL / Hager-h3/C&S -Winbreak2/HPL-Techno
4
-
49199
... More
Physical and Trunk Infra Structure for RT Works;Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , paintedwith two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cableclamp etc complete for 3 phase motor pump sets. Makes : Voltmeter ;. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco /RishabAmmeter Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco /RishabSingle phase preventor Makes: L&T / Minilec / Powertec.32 A TP, 10KA MCB. Makes: Legrand /Schneidercapacitor Makes: L&T / Siemens / Schneider / Epcos/Havells.Voltmeter ; 0-500 V 96x96mm size.0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No.Single phase preventor of suitable range - 1No.32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set
4
-
73191
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
60
-
51945
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
101.14
-
31027
... More
Physical and Trunk Infra Structure for RT Works;with two coats of Red oxide primer and two coats of Grey paint, lock and
1
-
4302
... More
Physical and Trunk Infra Structure for RT Works;key arrangements two side lovures with weld mesh inside etc., complete
6.4
-
741
... More
Physical and Trunk Infra Structure for RT Works;consisting of the following equipment with all internal wiring using L&T /
7.45
-
1689
... More
Physical and Trunk Infra Structure for RT Works;Finolex copper FRLS cables of suitable size and capacity and cable
1.15
-
4273
... More
Physical and Trunk Infra Structure for RT Works;clamp etc complete for 3 phase motor pump sets.
0.49
-
4204
... More
Physical and Trunk Infra Structure for RT Works;Makes : Voltmeter ;. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco /
0.63
-
7051
... More
Physical and Trunk Infra Structure for RT Works;Rishab
0.92
-
10782
... More
Physical and Trunk Infra Structure for RT Works;Ammeter Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco /Rishab
0.63
-
6846
... More
Physical and Trunk Infra Structure for RT Works;Single phase preventor Makes: L&T / Minilec / Powertec.
1.4
-
16392
... More
Physical and Trunk Infra Structure for RT Works;32 A TP, 10KA MCB. Makes: Legrand / Schneider
12.54
-
6197
... More
Physical and Trunk Infra Structure for RT Works;capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells.
7.4
-
45873
... More
Physical and Trunk Infra Structure for RT Works;Voltmeter ; 0-500 V 96x96mm size.
0.07
-
789
... More
Physical and Trunk Infra Structure for RT Works;0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No.
0.05
-
558
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.29
-
24262
... More
Physical and Trunk Infra Structure for RT Works;32 A TP, 10KA MCB. - 1No
1
-
7689
... More
Physical and Trunk Infra Structure for RT Works;0.60 x 0.90 m Window::- Providing and Fixing of openable windows made of Pre-painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5-7 microns thick. finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3523
... More
Physical and Trunk Infra Structure for RT Works;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102
... More
Physical and Trunk Infra Structure for RT Works;Plastering 12 mm thick Single coat with C.M. (1:3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
2590
... More
Physical and Trunk Infra Structure for RT Works;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities. for Internal And External Walls.
64.62
-
21809
... More
Physical and Trunk Infra Structure for RT Works;Painting to Doors and M.S.Grills with primer and two coats with Synthetic enamel paint in all shades of Grade-I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
306
... More
Physical and Trunk Infra Structure for RT Works;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls
64.62
-
14885
... More
Physical and Trunk Infra Structure for RT Works;Supply and Transportation of 5-10 phase 3HP motor,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well of category 1 Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/AryenVarsha/Falcon
10
-
446666
... More
Physical and Trunk Infra Structure for RT Works;Supply of 4 Sqmm FRLS / FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Category II Makes : Makes: V-Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/Rhino/ Standard / Vimal
1000
-
210165
... More
Physical and Trunk Infra Structure for RT Works;Supply of 125A 4 Pole MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity ,25 KA. with thermal magnetic release Panel Mounted of category I Makes : L&T- D shine / Schneider-CVS/Legrand -DP X3/ Siemens- 3VL / Hager-h3/C&S -Winbreak2/HPL-Techno
10
-
141809
... More
Physical and Trunk Infra Structure for RT Works;Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH /KSP(Karunya) /Crompton. complete.,.
10
-
82996
... More
Physical and Trunk Infra Structure for RT Works;Drilling of Bore Wells with DTH Righ:- Drilling of Bore well by down the hole hammer with DTH Rig to a finished dia of 165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation , all cosolidated formation etc, and remaing the bore to subinsertion of required casing pipe etc. including insertio of casing pipe with coup;ings, caps any other relevant material upto required depth as directed by the department, transportion of drilling rigs and supporting vehicle and including bore development . Flushing of Bore Well at an average pressure of 150 PSI conducting yield test. Crew charges done to the satisfaction of the department and includin gall labour charges and all taxes , but excluding the cost of casing pipe etc., The entire work should be carried out as per IS- 2800 Part I &II 1979 and IS 11189 of 1985 and amended from time to time.
600
-
282000
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,supply and delivery of 250 mm dia PVC pipes 6 KG/SQCM conforming to IS: 4985/2000 including transportation to the site including taxes complete for casing pipe
180
-
357683
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,supply and delivery of 180 mm dia PVC pipes 6 KG/SQCM conforming to IS: 4985/2000 including transportation to the site including taxes complete for casing pipe
600
-
595115
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 63mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges, loading, unloading, forwarding charges, labour charges complete for finished item of work but excluding cost of Specials
600
-
70214
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. From Bore wells to Sump
5000
-
710094
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation and depositing on bank for all lifts and with an initial lead of 10mts incluidng all operational, incidental, labour charges, such as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work by mechanical means up to 3.00 Mts depth.
2025
-
234536
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for Slotting of pipes including all labour charges and sloting as per the directions of the department officers etc. Compelte for 165 mm dia bore wells.
180
-
61560
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of Borewell caps including all charges etc., complete 165mm/180mm dia Borewell.
10
-
3150
... More
Physical and Trunk Infra Structure for RT Works;Geological Survey Charges
10
-
13000
... More
Physical and Trunk Infra Structure for RT Works;Construction of 350 KL capacity 25 m staging OHSR for finished work including 2 coats of snowcem painting,lettering, fixing of all required fixtures, pipes, bends, valves, etc. complete as per departmental designs and drawings.Fixtures include:a) RCC or Aluminium ladder inside 0.60 m wide. b) spiral staircase on the outside shall be provided upto 200KL ELSR. Above 200KL ELSR Capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing upto 1.0 height. c) Lightening arrestor, including conductor and earthing etc with relevant IS codes. d) RCC ventilators with copper or stainless steel fly proof mesh. e) D.I Manholes frame and cover 0.60 x 0.60 m as per IS specifications (light duty) - 2 Nos. f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No. g) The ladder shall be with Aluminium and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only. h) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1mts I)The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts. J)The dog legged staircase shall be enclosed with brick / CRS wall on three sides and front side with PVC door of standard maker up to 1st brace level from ground level to prevent unauthorized entry. K) D.I swan neck ventilators shall be provided in top dome and slab of M30grade of 25mt staging
350000
-
7961160
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities . OD 347mm pipe
150
-
187295
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities . OD 295mm pipe
310
-
290569
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities . OD 235mm pipe
855
-
513872
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities . OD 180mm pipe
408
-
148337
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities. OD 347mm pipe
150
-
54716
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities. OD 295mm pipe
310
-
85244
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities. OD 235mm pipe
855
-
150343
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities. OD 180mm pipe
408
-
43501
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
18
-
122091
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
26
-
277527
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, incidental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for for finished item of work for Foundation of Buildings.
1372.8
-
158998
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
208.28
-
124178
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
291.07
-
22238
... More
Physical and Trunk Infra Structure for RT Works;Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K7 suitable for push-on-joint (rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation, taxes and duties. 200 MM Dia
250
-
559373
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
380
-
275017
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
950
-
329204
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 63mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
560
-
63627
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 200mm dia(PN-1.0 MPA)
5
-
143036
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 150mm dia(PN-1.0 MPA)
11
-
242504
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 100mm dia(PN-1.0 MPA)
16
-
226757
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of 50 mm dia Gunmetal gate valve (GM Peet) as per IS-778 Class-I Indian make heavey type
62
-
232879
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 200mm Dia. DI double socket bends conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
8
-
34472
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 160mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
12
-
21023
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 63mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
61
-
11850
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 200mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
16
-
11143
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 160mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
42
-
16034
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 110mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
20
-
3908
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1571.8
-
182046
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
229.5
-
136832
... More
Physical and Trunk Infra Structure for RT Works;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
380
-
26079
... More
Physical and Trunk Infra Structure for RT Works;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
950
-
43615
... More
Physical and Trunk Infra Structure for RT Works;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
560
-
18676
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
5
-
2686
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 150 mm Dia. Sluice Valve including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
11
-
3582
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 100 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
16
-
3074
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 200mm dia D.I. Sluice Valve.
10
-
5271
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 150mm Dia.Sluice Valve.
22
-
10702
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for jointing D.I pipes and valves with flanged ends excluding cost and joints materials such as bolts, nuts rubber packing, whilte lead including filling with water conveyance and all other chrges etc.,complete for 100mm Dia. Sluice Valve.
32
-
10123
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
42
-
284878
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values. ( No.of Bolts for each valve 8 Nos. and total weight of Bolts 1.50 Kg./8 Nos.)
63
-
7944
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of Rubber Packing including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .)
37.8
-
3994
... More
Physical and Trunk Infra Structure for RT Works;Supplying and delivery of 160mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
12
-
4322
... More
Physical and Trunk Infra Structure for RT Works;Supplying and delivery of 63mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
16
-
1218
... More
Physical and Trunk Infra Structure for RT Works;Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with flanged ends carefully into trench and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Reference to specifications. BIS No.3114/1994) for 200mm dia
250
-
37396
... More
Physical and Trunk Infra Structure for RT Works;Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete (PHE-JCIR-4) for 200mm dia
43
-
13194
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 140mm x 160mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work.
61
-
52048
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
255.75
-
19540
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation and depositing on bank for all lifts and with an initial lead of 10mts incluidng all operational, incidental, labour charges, such as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work by mechanical means up to 3.00 Mts depth.
412.11
-
47731
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
47.25
-
28171
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to work site and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing and all other taxes etc., complete for finished item of work.
16.65
-
61870
... More
Physical and Trunk Infra Structure for RT Works;Plain cement concrete M 15 grade using 40,20 & 10mm metal (HBG) mechanically mixed in foundation complete and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 804, 805, 806, 807 and 900 MORD including form work, overhead charges & Contractors profit, VAT and seigniorage charges etc., complete
219.67
-
1633382
... More
Physical and Trunk Infra Structure for RT Works;Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets. Tech Specification Clause 1101 MORD ,including overhead charges & Contractors profit, VAT and seigniorage charges etc., complete - For Pipe Culverts
112.5
-
857048
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
6720
-
778310
... More
Physical and Trunk Infra Structure for RT Works;Forming embankment with Gravel by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities
4680
-
1312038
... More
Physical and Trunk Infra Structure for RT Works;Construction of granular sub-base by providing well graded material for grading-III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as directed by the Departmental Authorities
1440
-
1524758
... More
Physical and Trunk Infra Structure for RT Works;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.
1800
-
3377970
... More
Physical and Trunk Infra Structure for RT Works;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
1680
-
9693415
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
1.29
-
106429
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
148.5
-
17199
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
13.5
-
8049
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
13.5
-
50165
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain Bed
13.5
-
65315
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain Walls
41.25
-
306719
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Drain slab.
8.84
-
52517
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.66
-
54547
... More
Physical and Trunk Infra Structure for RT Works;Earthwork excavation for road surfaces as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH-For Sectioning
115.56
-
13384
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities.
28.89
-
107352
... More
Physical and Trunk Infra Structure for RT Works;Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 MORD and 1405 MORTH. including cost and conveyance of all materials complete as directed by the Departmental authorities.
173.34
-
629280
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete 0 M To 1.00 M Depth
825
-
1301380
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete 1 M To 2.00 M Depth
675
-
1525217
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete 2.00 M To 5.00 M Depth
1575
-
5341471
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete 5.00 M To 6.00 M Depth
375
-
1514756
... More
Physical and Trunk Infra Structure for RT Works;Manufacture supply delivery of 400 mm RCC perforated NP3 class pipes conforming to BIS-458/2003 including perforatation charges, cost of rubber rings, transportation including cost and conveyance of all meterials and all taxes, duties and all labour charges for laying and jointing etc., complete as directed by departmental authorities
150
-
280499
... More
Physical and Trunk Infra Structure for RT Works;Lowering the RCC S/S pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 etc., complete as directed by the departmental authorities (PHE- LRCS-9(IX)
150
-
35191
... More
Physical and Trunk Infra Structure for RT Works;Laying of 40 mm HBG metal as filter meterial as per approved section of infiltration gallery includeing all costs ans conveyance of meterials and labour charges etc.,complete as per SS
308.06
-
393996
... More
Physical and Trunk Infra Structure for RT Works;Laying of 12 to 20 mm HBG metal asn filter meterial as per approved section of infiltration gallery includeing all costs ans conveyance of meterials and labour charges etc.,complete as per SS
262.5
-
455172
... More
Physical and Trunk Infra Structure for RT Works;Laying 6 to 12 mm HBG metal asn filter meterial as per approved section of infiltration gallery includeing all costs ans conveyance of meterials and labour charges etc.,complete as per SS
337.5
-
464819
... More
Physical and Trunk Infra Structure for RT Works;Earthwork excavation and depositing on the bank in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel and soft disintegrated rock, like shelves,stonematrix, removable by pickaxes and crow bars rock boulders upto 3.0Cum Size etc for pipeline trenches by manual means and dump and as per specification drawings and as directed by the departmental officer and protecting the walls other structures etc.,so as not to disturbthe existing utility services during laying of pipeline taking all precautionary measures in the restricted areas with an initial lead of 50 M and with all lifts and delifts for pipe line trenches for laying watermains including divertion of traffic all incidental and operational charges etc., complete.
76.93
-
8910
... More
Physical and Trunk Infra Structure for RT Works;Supply and fabrication of structural steel for girders, angles includiing labour charges for cutting, welding, and all operational and incidental charges etc complete as directed by departmental authorities.
1194.65
-
108041
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.13
-
10427
... More
Physical and Trunk Infra Structure for RT Works;Providing VRCC in M 30 Grade using 20mm HBG machine crushed metal as per SS108 with necessary reinforcement including cost and conevyance of all materials and water to work site seignorage and all operational incidental, labor charges such as centering, form work, mixing concrete, laying, vibrating, curing etc complete for finished item of work as per SS 403 but excluding cost of reinforcement steel and its fabrication charges For Well Kerb
11.68
-
67808
... More
Physical and Trunk Infra Structure for RT Works;Providing VRCC in M 30 Grade using 20mm HBG machine crushed metal as per SS108 with necessary reinforcement including cost and conevyance of all materials and water to work site seignorage and all operational incidental, labor charges such as centering, form work, mixing concrete, laying, vibrating, curing etc complete for finished item of work as per SS 403 but excluding cost of reinforcement steel and its fabrication charges For Well Side Wall
245.78
-
1437498
... More
Physical and Trunk Infra Structure for RT Works;Providing VRCC in M 30 Grade using 20mm HBG machine crushed metal as per SS108 with necessary reinforcement including cost and conevyance of all materials and water to work site seignorage and all operational incidental, labor charges such as centering, form work, mixing concrete, laying, vibrating, curing etc complete for finished item of work as per SS 403 but excluding cost of reinforcement steel and its fabrication charges For Roof Slab
5.77
-
30677
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
20.36
-
1675201
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia Upto 2.0 m below GL/m
2
-
216751
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia From 2 -4 m below GL/m
2
-
270938
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia From 4 -6 m below GL/m
2
-
325126
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia From 6 -8 m below GL/m
2
-
379314
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia From 8-10 m below GL/m
2
-
433501
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia From 10 -11 m below GL/m
1
-
217035
... More
Physical and Trunk Infra Structure for RT Works;Suply and delivery and fixing of PVC Encapsulated steps for infiltration well excluding all taxes and duries etc including finishing of steps
96
-
18106
... More
Physical and Trunk Infra Structure for RT Works;Providing VRCC in M 30 Grade using 20mm HBG machine crushed metal as per SS108 with necessary reinforcement including cost and conevyance of all materials and water to work site seignorage and all operational incidental, labor charges such as centering, form work, mixing concrete, laying, vibrating, curing etc complete for finished item of work as per SS 403 but excluding cost of reinforcement steel and its fabrication charges Side Wall
27.25
-
159376
... More
Physical and Trunk Infra Structure for RT Works;Providing VRCC in M 30 Grade using 20mm HBG machine crushed metal as per SS108 with necessary reinforcement including cost and conevyance of all materials and water to work site seignorage and all operational incidental, labor charges such as centering, form work, mixing concrete, laying, vibrating, curing etc complete for finished item of work as per SS 403 but excluding cost of reinforcement steel and its fabrication charges Roof Slab
8.08
-
42961
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
2.28
-
187691
... More
Physical and Trunk Infra Structure for RT Works;Plastering 12 mm thick in CM(1:4) prop. to brick wall including cost and conveyance of all materials to site, including all labour charges and all other incidental and operational charges etc., complete
375.17
-
56797
... More
Physical and Trunk Infra Structure for RT Works;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
38.49
-
19022
... More
Physical and Trunk Infra Structure for RT Works;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls
450.03
-
103669
... More
Physical and Trunk Infra Structure for RT Works;Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 BMT-F.29 of building SSR
9
-
35789
... More
Physical and Trunk Infra Structure for RT Works;Providing and fixing of Openable Windows made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7micronsthick alkyd backer and section for outer frame of 48 x 50 mm, centre mullionof 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beadingsection should be 12 x 12 mm and the outer frame and mullions to haverebate for glazed shutter with a 20 mm provision for guard bars/grills and thesections cut to length metre joined with corner bracket, centre mullion fixedwith mullion cap, handle, stay, 2 nos. of stainless steel heavy duty pivot hingesprovided per shutter and windows fitted with 5 mm thick plain float glass withrubber gaskets including fixing the frames in concrete/masonry wall by meansof self expanding screws, Including 10mm Square guard bars with 6?(152.4mm) pitch etc., complete for finished item of work.
2
-
15054
... More
Physical and Trunk Infra Structure for RT Works;Manufacuture ,supply , delivery and fixing of M.S gantry girder with 2 Nos of 200*200 mm channel with chain pully with 3T capacity of standard make for circular and including fabrication , all labour charges etc complete
1
-
200000
... More
Physical and Trunk Infra Structure for RT Works;Add for ramp and eletrification etc
1
-
500000
... More
Physical and Trunk Infra Structure for RT Works;Supply and erection of 2 no's of pumpsets of each 30 HP at dishcarge of 25 lps having a total head of 60 m.
22.4
-
1792000
... More
Physical and Trunk Infra Structure for RT Works;Supply, transportation and delivery at site of 3 Phase, 50 Hz, oil immersed and naturally cooled, outdoor / Indoor type copper wound transformer designed and manufactured as per IS 2026-1977 and 1st filling of oil as per IS 335 of 1993, connected delta on primary side and Star on secondary side with additional neutral brought out on load side, 11000V / (433V / 415V) with HV tapping + or - 2.5% contineously rated for full load and temporature rise not exceeding 50°C in oil and 55°C rise by th resistance of the winding after contineous run on full load rating complete with the following standard mountings. Makes: KIRLOSKAR / ESENNAR / VOLTAMP / PETE / SERVOMAX 1. Rated KVA : 100 KVA (Building SSR, sl no.1356 , page no.261) 2. Service: Outdoor / Indoor 3. Mounting : Plinth. 4. Copper wound : Double. 5. Type : Core. 6. Cooling : ONAN 7. Temp . Rise : 55:C. 8. Vector Group: Dyn 11 9. Primary Connection : Delta 10. Primary Volts : 11000 11. Primry Frequency : 50 12.Primary Phases : 3 13. Primary wires: 3 14. Secondary connection : Star 15. Secondary Volts : 415 / 433V 16. Secondary phases : 3 17. Secondary wires: 4 18. Taps on primary winding for primary voltage variation : +7.5% to - 7.5% in steps of 2.5%, 19. Terminal arrangement. a. HV: Bare Busings / Cable end box b. LV : Cable box 20. LV : One separate terminal for earthing. 20. No load losses (Watts): ..........As per IS specification 21. Load losses (Watts): ............As per IS specification 22. Impedance(Z%) : .............As per IS specification 21. Fittings & Accessories. a. Rating and terminal marking plate b. Earthing terminals c. Lifting Lugs d. Conservator with drain plug. e. Oil level Indicator f. Dehydrating silicagel breather g. Air release device h. Drain cum filter wall i. Explosion vent with diaphragm j. Radiators (Attachable) k. Seperate neutral bushing l. Uni directional flat rollers.
2
-
818028
... More
Physical and Trunk Infra Structure for RT Works;Cutting open bituminous tar road surface including depositing of excavated materials for trench work including labour charges and all incidental and operational charges etc., complete. SSR Sl.No.25a (PH SSR).
630
-
65350
... More
Physical and Trunk Infra Structure for RT Works;Cutting open cement concrete road surface including depositing of excavated materials for trench work including labour charges and all incidental and operational charges etc., complete. SSR Sl.No.25b (PH SSR).
63
-
199558
... More
Physical and Trunk Infra Structure for RT Works;RBR - FNDN-1 - (i-B) - In ordinary soils, by Mechanical means: Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material, dressing of sides and bottom as per Technical Specification 304 MORTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Pipe Lines by mechanical means.
8190
-
948566
... More
Physical and Trunk Infra Structure for RT Works;PHE-BHLW-26; Barricading, hoarding, lighting and watching etc., for water supply and sewerage works for trenches of depths upto 6?-0? (2 Meter) below G.L
3500
-
639030
... More
Physical and Trunk Infra Structure for RT Works;Bailing out water by using oil driven pumpset inlcuding cost and conveyance, hire charges, crew charges etc complete.
280
-
19793
... More
Physical and Trunk Infra Structure for RT Works;Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 & K7 suitable for push-on-joint (rubber gasket jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation,.
7000
-
26145000
... More
Physical and Trunk Infra Structure for RT Works;PHE-LCIS-1: Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994) for 20mm dia
7000
-
1089480
... More
Physical and Trunk Infra Structure for RT Works;Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete (PHE-JCIR-4) for 250 mm dia
1273
-
402815
... More
Physical and Trunk Infra Structure for RT Works;Manufacturing and supply of MS pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths including painting with epoxy in tow coats over a premary coat of red oxide including cost of MS Plates , welding rods and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches for 250 mm dia MS pipe
27000
-
2484760
... More
Physical and Trunk Infra Structure for RT Works;Manufacturing and supply of MS pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths including painting with epoxy in tow coats over a premary coat of red oxide including cost of MS Plates , welding rods and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches for 800 mm dia MS pipe
7800
-
717820
... More
Physical and Trunk Infra Structure for RT Works;Lowering MS pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with wire mesh and cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers for 250 mm dia MS pipe
300
-
164730
... More
Physical and Trunk Infra Structure for RT Works;Lowering MS pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with wire mesh and cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers for 800 mm dia MS pipe
30
-
53450
... More
Physical and Trunk Infra Structure for RT Works;Painting with epoxy paint for MS Pipes in two coats over a epoxy primer including cost and conveyance of all materials cost of brushes and sundries etc complete as directed by departmental authorities.
1293.18
-
308539
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 250mm dia(PN-1.6 MPA)
4
-
182403
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 150mm dia(PN-1.6 MPA)
4
-
97350
... More
Physical and Trunk Infra Structure for RT Works;Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes
2
-
120727
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 150 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
4
-
1302
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 250 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
6
-
4580
... More
Physical and Trunk Infra Structure for RT Works;PHE-JCIF-5-: Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) 150mm dia Sluice Valves
12
-
5841
... More
Physical and Trunk Infra Structure for RT Works;PHE-JCIF-5-: Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) 250mm dia Sluice Valves
18
-
13470
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality.S Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538.
14
-
385802
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete. 80mm dia air valve
14
-
5192
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
22
-
234831
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
12.92
-
48009
... More
Physical and Trunk Infra Structure for RT Works;Vibrated cement concrete M20 using graded HBG metal including cost and conveyance of all materials land labour charges for centering, machine mixing, laying, vibrating and curing etc. including all other incidental charges of all T&P etc. for finished item of work as per MoRTH apecifications 1500, 1700, 2100 and 2702 and as directed by the depermental engineers in charge. RBR - FNDN Vol 4 B ii
77.49
-
633788
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
3.87
-
318755
... More
Physical and Trunk Infra Structure for RT Works;Railway crossing/Road crossing/Canal crossing by adopting trenchless technology tunneling work through specialized pipe jacking method by erecting the equipment true to the alignment and gradient, by hydraulic pipe jacking technique complete including tunneling, excavation in all types of soils except hard rock and construction of RCC chambers suitable to casing pipe pits, and conveyance charges of machinery and other required materials but including cost of encasing pipe, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in ? Charge.
30
-
930507
... More
Physical and Trunk Infra Structure for RT Works;RBR-STCL-7 : Dismantling Stone Masonry as per Technical Specification Clause 202 : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH - Rubble Stone Masonry in Cement Mortar
43.2
-
25395
... More
Physical and Trunk Infra Structure for RT Works;RBR-STCL-5 : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH
14.4
-
10799
... More
Physical and Trunk Infra Structure for RT Works;Filling with quarry dust (HBG stone chips of 2.36mm and below) for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
504
-
279045
... More
Physical and Trunk Infra Structure for RT Works;Construction of plain cement concrete M30 grade including coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, spreading the concrete with sholvels, rakes, compacted using plate vibrators and finished in continuous operation , admixtures as approved, curing of concrete slabs for 21- days, curing compound (where specified) and water finishing to lines and grade etc complete
84
-
483297
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
5260.2
-
609236
... More
Physical and Trunk Infra Structure for RT Works;Forming embankment with Gravel by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (4th revision) - with a lead beyond 1000m as directed by the Departmental Authorities
2941.25
-
824580
... More
Physical and Trunk Infra Structure for RT Works;Construction of granular sub-base by providing well graded material for grading-III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as directed by the Departmental Authorities
686.11
-
856207
... More
Physical and Trunk Infra Structure for RT Works;Providing, laying, spreading and compacting graded HBG Crushed stone aggregate to wet mix macadam specification including cost, seigniorage of all material and including premixing the material with water at OMC in mechanical mixer Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in base course on well prepared surface and compacting with Vibratory roller of 80 to 100 KN to achieve the desired density etc., as directed by the Engineer-in-Charge and as per MORTH & H Specification for finished item of work.
848.56
-
1757887
... More
Physical and Trunk Infra Structure for RT Works;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
782.3
-
4648730
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for Block approach
23.4
-
131355
... More
Physical and Trunk Infra Structure for RT Works;Filling with quarry dust for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
23.4
-
15829
... More
Physical and Trunk Infra Structure for RT Works;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
0.36
-
28005
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.58
-
47988
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
5260.2
-
401880
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
778.67
-
90186
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
116.77
-
84093
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
116.77
-
453456
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain Bed
116.77
-
585273
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain Walls
178.17
-
1354634
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Drain slab.
77.75
-
466215
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
5.83
-
479755
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
778.67
-
59490
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
34.58
-
4005
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
5.46
-
3932
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course
3.64
-
14135
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities., for Culvert Bed
3.64
-
18245
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities., for Culvert walls.
9.36
-
71165
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
7.18
-
43030
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.57
-
47231
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
367.64
-
42580
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
33.91
-
24422
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course
33.91
-
131691
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR BOTTOM SLAB.
28.33
-
187368
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR SIDE WALLS (Wall thickness 0.20 M)
19.01
-
299853
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR TOP RING BEAM. (Wall thickness 0.30 M)
3.2
-
36058
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 gradeConcrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR TOP DOME SLABS.
12.87
-
201652
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
7.61
-
626035
... More
Physical and Trunk Infra Structure for RT Works;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
237.78
-
117913
... More
Physical and Trunk Infra Structure for RT Works;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls
93.15
-
21459
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with 8mm Dia. nominal reinforcement as directed by the department and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finiahed item of work.
2
-
1507
... More
Physical and Trunk Infra Structure for RT Works;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 : 1994 of category 1 Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarsha of suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H-type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
4
-
189662
... More
Physical and Trunk Infra Structure for RT Works;Supply of 4 Sqmm FRLS / FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Category II Makes : Makes: V-Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/Rhino/ Standard / Vimal
100
-
21016
... More
Physical and Trunk Infra Structure for RT Works;Supply of 125A 4 Pole MCCB, Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted of category I Makes :Makes: L&T- D shine / Schneider-CVS/Legrand -DP X3/ Siemens- 3VL / Hager-h3/C&S -Winbreak2/HPL-Techno
4
-
49199
... More
Physical and Trunk Infra Structure for RT Works;Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , paintedwith two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cableclamp etc complete for 3 phase motor pump sets. Makes : Voltmeter ;. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco /RishabAmmeter Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco /RishabSingle phase preventor Makes: L&T / Minilec / Powertec.32 A TP, 10KA MCB. Makes: Legrand /Schneidercapacitor Makes: L&T / Siemens / Schneider / Epcos/Havells.Voltmeter ; 0-500 V 96x96mm size.0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No.Single phase preventor of suitable range - 1No.32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set
4
-
73191
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
60
-
51945
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
101.14
-
31027
... More
Physical and Trunk Infra Structure for RT Works;with two coats of Red oxide primer and two coats of Grey paint, lock and
1
-
4302
... More
Physical and Trunk Infra Structure for RT Works;key arrangements two side lovures with weld mesh inside etc., complete
6.4
-
741
... More
Physical and Trunk Infra Structure for RT Works;consisting of the following equipment with all internal wiring using L&T /
7.45
-
1689
... More
Physical and Trunk Infra Structure for RT Works;Finolex copper FRLS cables of suitable size and capacity and cable
1.15
-
4466
... More
Physical and Trunk Infra Structure for RT Works;clamp etc complete for 3 phase motor pump sets.
0.49
-
4277
... More
Physical and Trunk Infra Structure for RT Works;Makes : Voltmeter ;. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco /
0.63
-
7145
... More
Physical and Trunk Infra Structure for RT Works;Rishab
0.92
-
10919
... More
Physical and Trunk Infra Structure for RT Works;Ammeter Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco /Rishab
0.63
-
6939
... More
Physical and Trunk Infra Structure for RT Works;Single phase preventor Makes: L&T / Minilec / Powertec.
1.4
-
16601
... More
Physical and Trunk Infra Structure for RT Works;32 A TP, 10KA MCB. Makes: Legrand / Schneider
12.54
-
6218
... More
Physical and Trunk Infra Structure for RT Works;capacitor Makes: L&T / Siemens / Schneider / Epcos/Havells.
7.4
-
45933
... More
Physical and Trunk Infra Structure for RT Works;Voltmeter ; 0-500 V 96x96mm size.
0.07
-
799
... More
Physical and Trunk Infra Structure for RT Works;0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No.
0.05
-
565
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.29
-
24262
... More
Physical and Trunk Infra Structure for RT Works;32 A TP, 10KA MCB. - 1No
1
-
7689
... More
Physical and Trunk Infra Structure for RT Works;0.60 x 0.90 m Window::- Providing and Fixing of openable windows made of Pre-painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5-7 microns thick. finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3523
... More
Physical and Trunk Infra Structure for RT Works;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, fixing, laying and all labour charges, curing etc., complete for finished item of work as directed by the departmental authorities
0.35
-
102
... More
Physical and Trunk Infra Structure for RT Works;Plastering 12 mm thick Single coat with C.M. (1:3) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete for finished item of work etc., complete. for Ceiling as directed by the Departmental Authorities.
7.5
-
2599
... More
Physical and Trunk Infra Structure for RT Works;Plastering 12 mm thick Single coat with C.M. (1:4) Prop. with smooth finishing including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hacking surface, scaffolding, leads, lifts , curing etc., complete. for Ceiling as directed by the Departmental Authorities. for Internal And External Walls.
64.62
-
21887
... More
Physical and Trunk Infra Structure for RT Works;Painting to Doors and M.S.Grills with primer and two coats with Synthetic enamel paint in all shades of Grade-I aprpoved brand and colour including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
306
... More
Physical and Trunk Infra Structure for RT Works;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls
64.62
-
14885
... More
Physical and Trunk Infra Structure for RT Works;Construction of 250 KL capacity 25 m staging OHSR for finished work including 2 coats of snowcem painting,lettering, fixing of all required fixtures, pipes, bends, valves, etc. complete as per departmental designs and drawings.Fixtures include:a) RCC or Aluminium ladder inside 0.60 m wide. b) spiral staircase on the outside shall be provided upto 200KL ELSR. Above 200KL ELSR Capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing upto 1.0 height. c) Lightening arrestor, including conductor and earthing etc with relevant IS codes. d) RCC ventilators with copper or stainless steel fly proof mesh. e) D.I Manholes frame and cover 0.60 x 0.60 m as per IS specifications (light duty) - 2 Nos. f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No. g) The ladder shall be with Aluminium and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only. h) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1mts I)The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts. J)The dog legged staircase shall be enclosed with brick / CRS wall on three sides and front side with PVC door of standard maker up to 1st brace level from ground level to prevent unauthorized entry. K) D.I swan neck ventilators shall be provided in top dome and slab of M30grade of 25mt staging
250000
-
6415000
... More
Physical and Trunk Infra Structure for RT Works;Supply and Transportation of 5-10 phase 3HP motor,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well of category 1 Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/AryenVarsha/Falcon
6
-
268000
... More
Physical and Trunk Infra Structure for RT Works;Supply of 4 Sqmm FRLS / FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Category II Makes : Makes: V-Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/Rhino/ Standard / Vimal
600
-
126099
... More
Physical and Trunk Infra Structure for RT Works;Supply of 125A 4 Pole MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity ,25 KA. with thermal magnetic release Panel Mounted of category I Makes : L&T- D shine / Schneider-CVS/Legrand -DP X3/ Siemens- 3VL / Hager-h3/C&S -Winbreak2/HPL-Techno
6
-
85085
... More
Physical and Trunk Infra Structure for RT Works;Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH /KSP(Karunya) /Crompton. complete.,.
6
-
49797
... More
Physical and Trunk Infra Structure for RT Works;Drilling of Bore Wells with DTH Righ:- Drilling of Bore well by down the hole hammer with DTH Rig to a finished dia of 165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation , all cosolidated formation etc, and remaing the bore to subinsertion of required casing pipe etc. including insertio of casing pipe with coup;ings, caps any other relevant material upto required depth as directed by the department, transportion of drilling rigs and supporting vehicle and including bore development . Flushing of Bore Well at an average pressure of 150 PSI conducting yield test. Crew charges done to the satisfaction of the department and includin gall labour charges and all taxes , but excluding the cost of casing pipe etc., The entire work should be carried out as per IS- 2800 Part I &II 1979 and IS 11189 of 1985 and amended from time to time.
360
-
169200
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,supply and delivery of 250 mm dia PVC pipes 6 KG/SQCM conforming to IS: 4985/2000 including transportation to the site including taxes complete for casing pipe
108
-
214610
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,supply and delivery of 180 mm dia PVC pipes 6 KG/SQCM conforming to IS: 4985/2000 including transportation to the site including taxes complete for casing pipe
360
-
357069
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work.
360
-
51127
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. From Bore wells to Sump
3000
-
426056
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation and depositing on bank for all lifts and with an initial lead of 10mts incluidng all operational, incidental, labour charges, such as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work by mechanical means up to 3.00 Mts depth.
1215
-
140721
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for Slotting of pipes including all labour charges and sloting as per the directions of the department officers etc. Compelte for 165 mm dia bore wells.
108
-
36936
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of Borewell caps including all charges etc., complete 165mm/180mm dia Borewell.
6
-
1890
... More
Physical and Trunk Infra Structure for RT Works;Geological Survey Charges
6
-
7800
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities of OD 347mm Dia. DWC Pipe (300 I.D)
100
-
124863
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities of OD 295mm Dia. DWC Pipe (250 I.D)
334
-
313065
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities of OD 235mm Dia. DWC Pipe (2010 I.D)
322
-
193528
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities of OD 180mm Dia. DWC Pipe (150 I.D)
250
-
90893
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities of OD 347mm Dia. DWC Pipe (300 I.D)
100
-
36477
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities of OD 295mm Dia. DWC Pipe (250 I.D)
334
-
91843
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities of OD 235mm Dia. DWC Pipe (2010 I.D)
322
-
56620
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities of OD 180mm Dia. DWC Pipe (150 I.D)
250
-
26655
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
10
-
67828
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
15
-
160112
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
836.78
-
96916
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
122.85
-
88472
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
175.44
-
13403
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 200mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
100
-
112592
... More
Physical and Trunk Infra Structure for RT Works;Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K7 suitable for push-on-joint (rubber gasket and jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, excluding transportation, taxes and duties. 200 MM Dia K7 Pipe
100
-
223749
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
320
-
231594
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
290
-
100494
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 63mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
260
-
29541
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 200mm dia (PN-1.0 MPA)
8
-
228857
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 150mm dia(PN-1.0 MPA)
10
-
220459
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 100mm dia(PN-1.0 MPA)
12
-
170068
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of 50 mm dia Gunmetal gate valve (GM Peet) as per IS-778 Class-I Indian make heavey type
41
-
154001
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 200mm Dia. DI double socket bends conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
5
-
21545
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 160mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
6
-
8739
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 160mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
8
-
14016
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 63mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
52
-
10103
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 200mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
16
-
11143
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 160mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
20
-
7635
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 110mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
10
-
1954
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, inD.Idental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work for Water Supply Main Lines.
854.7
-
98991
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
114.6
-
82530
... More
Physical and Trunk Infra Structure for RT Works;Lowering, Laying and Jointing of 200mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
100
-
10136
... More
Physical and Trunk Infra Structure for RT Works;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
320
-
21962
... More
Physical and Trunk Infra Structure for RT Works;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
290
-
13314
... More
Physical and Trunk Infra Structure for RT Works;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
260
-
8671
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
8
-
4297
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 150 mm Dia. Sluice Valve including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
10
-
3256
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 100 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
5
-
961
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 200mm dia D.I. Sluice Valve.
16
-
8430
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 150mm Dia.Sluice Valve.
20
-
9725
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for jointing D.I pipes and valves with flanged ends excluding cost and joints materials such as bolts, nuts rubber packing, whilte lead including filling with water conveyance and all other chrges etc.,complete for 100mm Dia. Sluice Valve.
10
-
3162
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
27
-
183136
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values. ( No.of Bolts for each valve 8 Nos. and total weight of Bolts 1.50 Kg./8 Nos.)
40.5
-
5107
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of Rubber Packing including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .)
24.3
-
2568
... More
Physical and Trunk Infra Structure for RT Works;Supplying and delivery of 160mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
6
-
2161
... More
Physical and Trunk Infra Structure for RT Works;Supplying and delivery of 63mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
5
-
381
... More
Physical and Trunk Infra Structure for RT Works;Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with flanged ends carefully into trench and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Reference to specifications. BIS No.3114/1994)
100
-
14958
... More
Physical and Trunk Infra Structure for RT Works;Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), excluding the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete Reference to specifications IS 3114/1994/12888/1987
18
-
5237
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 140mm x 160mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work.
52
-
44369
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
130.88
-
9999
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
1039.5
-
120395
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
94.5
-
68055
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Drains.
94.5
-
366975
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain Bed
94.5
-
473660
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain Walls
288.75
-
2195383
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Drain slab.
53.84
-
322843
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
4.04
-
332219
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete 0 M To 1.00 M Depth
660
-
1041104
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete 1 M To 2.00 M Depth
540
-
1220173
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete 2.00 M To 5.00 M Depth
1260
-
4273177
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete 5.00 M To 6.00 M Depth
300
-
1211805
... More
Physical and Trunk Infra Structure for RT Works;Manufacture supply delivery of 400 mm RCC perforated NP3 class pipes conforming to BIS-458/2003 including perforatation charges, cost of rubber rings, transportation including cost and conveyance of all meterials and all taxes, duties and all labour charges for laying and jointing etc., complete as directed by departmental authorities
120
-
224399
... More
Physical and Trunk Infra Structure for RT Works;Lowering the RCC S/S pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 etc., complete as directed by the departmental authorities (PHE- LRCS-9(IX)
120
-
28152
... More
Physical and Trunk Infra Structure for RT Works;Laying of 40 mm HBG metal as filter meterial as per approved section of infiltration gallery includeing all costs ans conveyance of meterials and labour charges etc.,complete as per SS
246.44
-
351583
... More
Physical and Trunk Infra Structure for RT Works;Laying of 12 to 20 mm HBG metal asn filter meterial as per approved section of infiltration gallery includeing all costs ans conveyance of meterials and labour charges etc.,complete as per SS
210
-
395155
... More
Physical and Trunk Infra Structure for RT Works;Laying 6 to 12 mm HBG metal asn filter meterial as per approved section of infiltration gallery includeing all costs ans conveyance of meterials and labour charges etc.,complete as per SS
270
-
411734
... More
Physical and Trunk Infra Structure for RT Works;Earthwork excavation and depositing on the bank in all types of soils like black cotton soil, red earth, and ordinary gravel, hard gravelly soils, mixture of gravel and soft disintegrated rock, like shelves,stonematrix, removable by pickaxes and crow bars rock boulders upto 3.0Cum Size etc for pipeline trenches by manual means and dump and as per specification drawings and as directed by the departmental officer and protecting the walls other structures etc.,so as not to disturbthe existing utility services during laying of pipeline taking all precautionary measures in the restricted areas with an initial lead of 50 M and with all lifts and delifts for pipe line trenches for laying watermains including divertion of traffic all incidental and operational charges etc., complete.
76.93
-
8910
... More
Physical and Trunk Infra Structure for RT Works;Supply and fabrication of structural steel for girders, angles includiing labour charges for cutting, welding, and all operational and incidental charges etc complete as directed by departmental authorities.
1194.65
-
108041
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.13
-
10427
... More
Physical and Trunk Infra Structure for RT Works;Providing VRCC in M 30 Grade using 20mm HBG machine crushed metal as per SS108 with necessary reinforcement including cost and conevyance of all materials and water to work site seignorage and all operational incidental, labor charges such as centering, form work, mixing concrete, laying, vibrating, curing etc complete for finished item of work as per SS 403 but excluding cost of reinforcement steel and its fabrication charges For Well curb
11.68
-
69764
... More
Physical and Trunk Infra Structure for RT Works;Providing VRCC in M 30 Grade using 20mm HBG machine crushed metal as per SS108 with necessary reinforcement including cost and conevyance of all materials and water to work site seignorage and all operational incidental, labor charges such as centering, form work, mixing concrete, laying, vibrating, curing etc complete for finished item of work as per SS 403 but excluding cost of reinforcement steel and its fabrication charges For Well Side Wall
245.78
-
1482767
... More
Physical and Trunk Infra Structure for RT Works;Providing VRCC in M 30 Grade using 20mm HBG machine crushed metal as per SS108 with necessary reinforcement including cost and conevyance of all materials and water to work site seignorage and all operational incidental, labor charges such as centering, form work, mixing concrete, laying, vibrating, curing etc complete for finished item of work as per SS 403 but excluding cost of reinforcement steel and its fabrication charges For Roof Slab
5.77
-
31644
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
20.36
-
1675201
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia Upto 2.0 m below GL/m
2
-
216751
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia From 2 -4 m below GL/m
2
-
270938
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia From 4 -6 m below GL/m
2
-
325126
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia From 6 -8 m below GL/m
2
-
379314
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia From 8-10 m below GL/m
2
-
433501
... More
Physical and Trunk Infra Structure for RT Works;Well sinking in sandy and other loose soils under water either by manual labour,divers or dredgers,weighting the top of steining to assist sinking etc.,including dewatering and other incidental charges such as hire charges for mechanical equipment etc., complete upto 6.0 m internal dia From 10 -11 m below GL/m
1
-
217035
... More
Physical and Trunk Infra Structure for RT Works;Suply and delivery and fixing of PVC Encapsulated steps for infiltration well excluding all taxes and duries etc including finishing of steps
96
-
18106
... More
Physical and Trunk Infra Structure for RT Works;Providing VRCC in M 30 Grade using 20mm HBG machine crushed metal as per SS108 with necessary reinforcement including cost and conevyance of all materials and water to work site seignorage and all operational incidental, labor charges such as centering, form work, mixing concrete, laying, vibrating, curing etc complete for finished item of work as per SS 403 but excluding cost of reinforcement steel and its fabrication charges Side Wall
27.25
-
164395
... More
Physical and Trunk Infra Structure for RT Works;Providing VRCC in M 30 Grade using 20mm HBG machine crushed metal as per SS108 with necessary reinforcement including cost and conevyance of all materials and water to work site seignorage and all operational incidental, labor charges such as centering, form work, mixing concrete, laying, vibrating, curing etc complete for finished item of work as per SS 403 but excluding cost of reinforcement steel and its fabrication charges Roof Slab
8.08
-
44314
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
2.28
-
187691
... More
Physical and Trunk Infra Structure for RT Works;Plastering 12 mm thick in CM(1:4) prop. to brick wall including cost and conveyance of all materials to site, including all labour charges and all other incidental and operational charges etc., complete
375.17
-
57251
... More
Physical and Trunk Infra Structure for RT Works;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
38.49
-
16456
... More
Physical and Trunk Infra Structure for RT Works;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls
450.03
-
103669
... More
Physical and Trunk Infra Structure for RT Works;Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108 BMT-F.29 of building SSR
9
-
35789
... More
Physical and Trunk Infra Structure for RT Works;Providing and fixing of Openable Windows made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7micronsthick alkyd backer and section for outer frame of 48 x 50 mm, centre mullionof 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed glass beadingsection should be 12 x 12 mm and the outer frame and mullions to haverebate for glazed shutter with a 20 mm provision for guard bars/grills and thesections cut to length metre joined with corner bracket, centre mullion fixedwith mullion cap, handle, stay, 2 nos. of stainless steel heavy duty pivot hingesprovided per shutter and windows fitted with 5 mm thick plain float glass withrubber gaskets including fixing the frames in concrete/masonry wall by meansof self expanding screws, Including 10mm Square guard bars with 6?(152.4mm) pitch etc., complete for finished item of work.
2
-
15054
... More
Physical and Trunk Infra Structure for RT Works;Manufacuture ,supply , delivery and fixing of M.S gantry girder with 2 Nos of 200*200 mm channel with chain pully with 3T capacity of standard make for circular and including fabrication , all labour charges etc complete
1
-
200000
... More
Physical and Trunk Infra Structure for RT Works;Add for ramp and eletrification etc
1
-
500000
... More
Physical and Trunk Infra Structure for RT Works;Supply and erection of 2 no's of pumpsets of each 12 HP at dishcarge of 19 lps having a total head of 40 m
9
-
720000
... More
Physical and Trunk Infra Structure for RT Works;Supply, transportation and delivery at site of 3 Phase, 50 Hz, oil immersed and naturally cooled, outdoor / Indoor type copper wound transformer designed and manufactured as per IS 2026-1977 and 1st filling of oil as per IS 335 of 1993, connected delta on primary side and Star on secondary side with additional neutral brought out on load side, 11000V / (433V / 415V) with HV tapping + or - 2.5% contineously rated for full load and temporature rise not exceeding 50°C in oil and 55°C rise by th resistance of the winding after contineous run on full load rating complete with the following standard mountings. Makes: KIRLOSKAR / ESENNAR / VOLTAMP / PETE / SERVOMAX 1. Rated KVA : 100 KVA (Building SSR, sl no.1356 , page no.261) 2. Service: Outdoor / Indoor 3. Mounting : Plinth. 4. Copper wound : Double. 5. Type : Core. 6. Cooling : ONAN 7. Temp . Rise : 55:C. 8. Vector Group: Dyn 11 9. Primary Connection : Delta 10. Primary Volts : 11000 11. Primry Frequency : 50 12.Primary Phases : 3 13. Primary wires: 3 14. Secondary connection : Star 15. Secondary Volts : 415 / 433V 16. Secondary phases : 3 17. Secondary wires: 4 18. Taps on primary winding for primary voltage variation : +7.5% to - 7.5% in steps of 2.5%, 19. Terminal arrangement. a. HV: Bare Busings / Cable end box b. LV : Cable box 20. LV : One separate terminal for earthing. 20. No load losses (Watts): ..........As per IS specification 21. Load losses (Watts): ............As per IS specification 22. Impedance(Z%) : .............As per IS specification 21. Fittings & Accessories. a. Rating and terminal marking plate b. Earthing terminals c. Lifting Lugs d. Conservator with drain plug. e. Oil level Indicator f. Dehydrating silicagel breather g. Air release device h. Drain cum filter wall i. Explosion vent with diaphragm j. Radiators (Attachable) k. Seperate neutral bushing l. Uni directional flat rollers.
2
-
818028
... More
Physical and Trunk Infra Structure for RT Works;Cutting open bituminous tar road surface including depositing of excavated materials for trench work including labour charges and all incidental and operational charges etc., complete. SSR Sl.No.25a (PH SSR).
567
-
58815
... More
Physical and Trunk Infra Structure for RT Works;Cutting open cement concrete road surface including depositing of excavated materials for trench work including labour charges and all incidental and operational charges etc., complete. SSR Sl.No.25b (PH SSR).
113.4
-
359205
... More
Physical and Trunk Infra Structure for RT Works;RBR - FNDN-1 - (i-B) - In ordinary soils, by Mechanical means: Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material, dressing of sides and bottom as per Technical Specification 304 MORTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Pipe Lines by mechanical means.
6804
-
788039
... More
Physical and Trunk Infra Structure for RT Works;PHE-BHLW-26; Barricading, hoarding, lighting and watching etc., for water supply and sewerage works for trenches of depths upto 6?-0? (2 Meter) below G.L
1260
-
230051
... More
Physical and Trunk Infra Structure for RT Works;Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 & K7 suitable for push-on-joint (rubber gasket jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation,.
6100
-
17294171
... More
Physical and Trunk Infra Structure for RT Works;PHE-LCIS-1: Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994)
6100
-
702720
... More
Physical and Trunk Infra Structure for RT Works;Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete (PHE-JCIR-4)
1109
-
313381
... More
Physical and Trunk Infra Structure for RT Works;Manufacturing and supply of MS pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths including painting with epoxy in tow coats over a premary coat of red oxide including cost of MS Plates , welding rods and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches for 250 mm dia MS pipe
16000
-
1472450
... More
Physical and Trunk Infra Structure for RT Works;Lowering MS pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with wire mesh and cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers for 250 mm dia MS pipe
200
-
87856
... More
Physical and Trunk Infra Structure for RT Works;Painting with epoxy paint for MS Pipes in two coats over a epoxy primer including cost and conveyance of all materials cost of brushes and sundries etc complete as directed by departmental authorities.
552.64
-
131854
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 200mm dia(PN-1.6 MPA)
3
-
107277
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 150mm dia(PN-1.6 MPA)
3
-
73013
... More
Physical and Trunk Infra Structure for RT Works;Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) of following dia. conforming to IS- 5312 (Pts-1&2) (with amendments up to date, if any) having Body, Cover, Door, Bearing holder with D.I; Hinge pin, Door pin, Door suspension pin with Stainless Steel (IS 6603); Body seat ring , Door face ring, Bearing bushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel; Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxes
1
-
43961
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 150 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
3
-
977
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
4
-
2149
... More
Physical and Trunk Infra Structure for RT Works;PHE-JCIF-5-: Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.)150mm dia Sluice Valves
9
-
4380
... More
Physical and Trunk Infra Structure for RT Works;PHE-JCIF-5-: Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) 200mm dia Sluice Valves
12
-
6330
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality.S Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538.
12.6
-
202546
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete.
12.6
-
3986
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
20
-
213483
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities
15.01
-
58289
... More
Physical and Trunk Infra Structure for RT Works;Vibrated cement concrete M20 using graded HBG metal including cost and conveyance of all materials land labour charges for centering, machine mixing, laying, vibrating and curing etc. including all other incidental charges of all T&P etc. for finished item of work as per MoRTH apecifications 1500, 1700, 2100 and 2702 and as directed by the depermental engineers in charge. RBR - FNDN Vol 4 B ii
97.53
-
816936
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
4.88
-
401190
... More
Physical and Trunk Infra Structure for RT Works;Railway crossing/Road crossing/Canal crossing by adopting trenchless technology tunneling work through specialized pipe jacking method by erecting the equipment true to the alignment and gradient, by hydraulic pipe jacking technique complete including tunneling, excavation in all types of soils except hard rock and construction of RCC chambers suitable to casing pipe pits, and conveyance charges of machinery and other required materials but including cost of encasing pipe, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in ? Charge.
30
-
930507
... More
Physical and Trunk Infra Structure for RT Works;RBR-STCL-7 : Dismantling Stone Masonry as per Technical Specification Clause 202 : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH - Rubble Stone Masonry in Cement Mortar
43.2
-
25395
... More
Physical and Trunk Infra Structure for RT Works;RBR-STCL-5 : Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH
14.4
-
10799
... More
Physical and Trunk Infra Structure for RT Works;Filling with quarry dust (HBG stone chips of 2.36mm and below) for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
453.6
-
318803
... More
Physical and Trunk Infra Structure for RT Works;Construction of plain cement concrete M30 grade including coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, spreading the concrete with sholvels, rakes, compacted using plate vibrators and finished in continuous operation , admixtures as approved, curing of concrete slabs for 21- days, curing compound (where specified) and water finishing to lines and grade etc complete
75.6
-
448005
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
4502.18
-
521442
... More
Physical and Trunk Infra Structure for RT Works;Formation of Embankment by Dozing, levelling and Compacting of the available excavated earth by machinery to required profile in the low level areas in layers of 25 to 30 cm before compaction including cost of all machinery, labour, all operations such as watering, compacting to density control of not less than 95 percent or as stipulated using 8T roller etc., complete for the project including all charges
1204.35
-
67462
... More
Physical and Trunk Infra Structure for RT Works;Construction of granular sub-base by providing well graded material for grading-III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as directed by the Departmental Authorities
964.75
-
1058015
... More
Physical and Trunk Infra Structure for RT Works;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.
1205.94
-
2310123
... More
Physical and Trunk Infra Structure for RT Works;Construction of un-reinforced, dowel jointed at expansion and construction joint only, Design Mix M30 Grade cement concrete pavement, 200 mm thick, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using concrete mixcer , laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle vibrator and finished in continuous operation including Cost and conveyance of all materials, all hire and operational charges of T&P etc., provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days as per design & drawing and Technical Specification Clause 1501 MORD excluding cost of Mild steel round bars(dowel bars) as directed by the Departmental Authorities.
1125.54
-
6597101
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for Block approach
14.4
-
79666
... More
Physical and Trunk Infra Structure for RT Works;Filling with quarry dust for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
14.4
-
8022
... More
Physical and Trunk Infra Structure for RT Works;Providing Mild Steel Round bars( Dowel bars) including labour charges for straightening,cutting, bending to required sizes and shapes, placing in position of approved materials and size as per approved designs and drawings including cost and conveyance of steel bars, all wastage, and all incidental, Operational labour charges such as cutting, bending,placing in position,etc., complete and as directed by the Departmental authorities for CC pavement.
0.98
-
76870
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.86
-
70598
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
3297.83
-
251955
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
1412.9
-
163642
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
160.79
-
96088
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities
160.79
-
611742
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
160.79
-
792767
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
307.57
-
2314289
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Drain slab.
121.1
-
717342
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
9.08
-
747246
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
1412.9
-
107946
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
53.2
-
6162
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
8.4
-
5020
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course for Culvert
5.6
-
21306
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Culvert bed.
5.6
-
27610
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Culvert walls.
14.4
-
108350
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Culvert slab.
11.04
-
65396
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.88
-
72664
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
190.1
-
22017
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
17.82
-
10652
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities
17.82
-
67817
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR BOTTOM SLAB.
14.93
-
97676
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR SIDE WALLS (Wall thickness 0.20 M)
15.18
-
238405
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete b for finished item of work for,for GLSR TOP RING BEAM. (Wall thickness 0.30 M)
1.62
-
18168
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for GLSR TOP DOME SLAB.
7
-
109200
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed STEEL bars / TMT ( Fe.500 Grade as per IS1786 and as amended upto date) of different of diameters including labour charges for cutting, bending to required size, shapes, placing in position with cover blocks of approved materials and size and tying firmly with M.S.Binding wire of 20 SWG forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of mild steel bars, including all wastage, such as over laps, welding joints, chairs, space bars and all incidental, Operational labour charges, including sales and other taxes on all materials etc., complete for finished item of work in all floors (payment will be made on the basis of wieght of fabrication deformed bars only. No re-rolled steel shall be allowed) complete for (8mm to 40mm).
4.65
-
382383
... More
Physical and Trunk Infra Structure for RT Works;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
176.46
-
87744
... More
Physical and Trunk Infra Structure for RT Works;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls
75.24
-
17332
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of RCC Cover of 22" Dia. of 3" thick with nominal reinforcement and hooks for lifting including cost and conveyance of all materials to work site and operational, incidental and all labour charges for fixing charges etc., complete for finiahed item of work.
2
-
1507
... More
Physical and Trunk Infra Structure for RT Works;Supply and erecting 3 Phase, 10.00 HP ISI make submersible pumpset confirming to IS 14220 : 1994 of category 1 Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi /PSG/ AryenVarsha of suitable for erection in open well with water resistant dynamically balanced impeller with stainless steel shaft sleeves, pump coupling and pivot with squirrel cage Induction Motor of 3 phase, 415V, 50Hz.., A.C.Supply, heavy copper windings with water proof insulation and high precision strength not to be effected by chemicals in water with suitable bronze bearings, 10 HP pump erected with necessary H-type clamps of suitable size and strength including cost of all materials, Transportation and labour charges etc., complete and as directed by the Departmental authorities
3
-
142247
... More
Physical and Trunk Infra Structure for RT Works;Supply of 4 Sqmm FRLS / FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Category II Makes : Makes: V-Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/Rhino/ Standard / Vimal
75
-
15762
... More
Physical and Trunk Infra Structure for RT Works;Supply of 125A 4 Pole MCCB, Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted of category I Makes :Makes: L&T- D shine / Schneider-CVS/Legrand -DP X3/ Siemens- 3VL / Hager-h3/C&S -Winbreak2/HPL-Techno
3
-
36899
... More
Physical and Trunk Infra Structure for RT Works;Fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , paintedwith two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cableclamp etc complete for 3 phase motor pump sets. Makes : Voltmeter ;. Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco /RishabAmmeter Makes: L&T / C&S / SALZAR / HPL/ AEI / Meco /RishabSingle phase preventor Makes: L&T / Minilec / Powertec.32 A TP, 10KA MCB. Makes: Legrand /Schneidercapacitor Makes: L&T / Siemens / Schneider / Epcos/Havells.Voltmeter ; 0-500 V 96x96mm size.0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No.Single phase preventor of suitable range - 1No.32 A TP, 10KA MCB. - 1No Indication lamps (R-Y-B) with switch control - 1set
3
-
54893
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of 100mm Dia. B class G.I. Pipe properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete for connecting Motor at Sump to Panel Board and as directed by the Departmental authorities
45
-
38959
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of 25mm Dia. Nominal Bore G.I. Pipe Medium Grade properties and weight as per IS.1239 with fittings such as elbows, tees, couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for G.I. bends, unions and GI connectors with checkout and socket of Tata/Zenith make or equivalent etc., complete including cost and conveyance of all materials to work site, Transportation and all labour charges etc., complete. for sump railings and inside and outside ladders and as directed by the Departmental authorities
71.69
-
21992
... More
Physical and Trunk Infra Structure for RT Works;Providing Independent Earthing from Main switch Board for earth continuity with No.8, G.I wire including excavation of earth in hard gravel/hard desintegrated rock upto 5'-6'' depth below ground level of section 5'x2'x3' duly providing 40mm Dia G.I Pipe of 2mts, length using GI bolts&nuts and fixing earth wire including supply and fixing 1'-6'' dia 0'-8'' depth hume pipe ring and refilling the pit with 4 Kgs hard coke, 20Kgs salt and excavated earth including all labour charges etc., complete for finished item of work.
1
-
4302
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
6.4
-
741
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course forPump Room.
1.15
-
4375
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Foottings.
0.49
-
4243
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities,for Plinth Beam.
0.63
-
7101
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities,,for Columns
0.92
-
10855
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities,for Beams.
0.63
-
6895
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities,for SLABS.
1.4
-
16479
... More
Physical and Trunk Infra Structure for RT Works;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyanceof all materials, all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work and as directed by the Departmental authorities
12.54
-
6235
... More
Physical and Trunk Infra Structure for RT Works;Brick Masonry in C.M.(1:6) Prop. with Fly Ash cement solid blocks of size 290x225x140mm for manufacturing with compressive strength of 50 Kg/Sq.cm using fly ash, cement, gypsum and stone dust including cost and conveyance of all materials and water to work site, scaffolding and all labour charges,curing etc.,complete.
7.4
-
45897
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authoritiesfor Lintels.
0.07
-
795
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Chajjas
0.05
-
561
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.29
-
24262
... More
Physical and Trunk Infra Structure for RT Works;DOOR of SIZE 0.90 x 2.00 m:- Providing and fixing Door Frames fabricated from sections made of galvanized Stell powder coated (base steel as per IS-513, galvanized as per IS-277 with zinc of 120 grams/square meter), the factory made section are powder coated with pure polyester powder of 50-60 microns thick with total coated thickness of 1.25mm, size of Door Frame section of 105x60mm with a rebate of 38mm to accommodate 35mm thick Door Shutter with groove to insert gasket in the frame section, frame sectiion filled with polyurethane foam, cut to length and joined by way of welding each frame provided with :: (a) 2mm thick MS powder coated butt hinges of 100mm long - 3 Nos for Single Shutter, 6 Nos., for double shutter (b) CRCA electroplates stiffeners of 6 Nos - 3 in each vertical (c) 40mm x 200mm x 1.20mm hold fasts screwd to stiffeners - 6 Nos. with split end tail (d) Nylon Aldrops Receiver - 1 No. for Single shutter frame (e) Tie Road - 1 No. and supplying and fixing of Single Leaf Flush Door Shutter Solid bond Wood black Board type with Commercial ply on both faces of 30mm thick conforming to IS.2202 including cost of fixtures such as (i) 2 Nos.-250mm long M.S.powder coated Aldrops, (ii) 1 No.-250mm long 10mm Dia. M.S.Powder Coated Tower Bolt, (iii) 2 Nos.-125mm long M.S.powder coated Door Handles and (iv) 1 No. M.S.Powder coated Door Stopper and including cost and conveyance of all materials to work site and all labour charges etc., complete as directed by the departmental authorities
1
-
7689
... More
Physical and Trunk Infra Structure for RT Works;0.60 x 0.90 m Window::- Providing and Fixing of openable windows made of Pre-painted steel (base steel as per IS 513 of 0.58mm thick Galvanized as per IS 277 with zinc of 120 GSM ) primer coated with epoxy primer of 5-7 microns thick. finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48 x 50mm, centre mullion of 48 x 50 mm section for shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars/grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stairless steel heavy duty pivot hinges provided per shutter and windows fitted with 5mm thick plain float glass with rubber gaskets including fixing the frames in concrete/masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch etc., complete for finished item of work. (Single shutter window 2'0" x 4'0" (609.6mm x 1219.2mm). Outer frame section size of 48 x 50mm shutter frame section size of 48 x 25mm and as directed by the Departmental Authorities
1
-
3523
... More
Physical and Trunk Infra Structure for RT Works;Supply and fixing to Cement JALLIES 40mm thick including cost and conveyance of all materials and water to work site and all operational, incidental charges, mxing, laying and all labour charges, curing with neat finishing etc., complete for finished item of work as directed by the dept.
0.35
-
102
... More
Physical and Trunk Infra Structure for RT Works;Plastering 12mm thick in Single Coat in CM(1:3)Prop. with sponge finishing including cost and conveyance of all materials and water to site of work and all operational, incidental charges, scaffolding charges, hacking surface and all labour charges, curing etc.,complete for finished item of work to the required strength as directed by the dept.,for CEILING
7.5
-
2607
... More
Physical and Trunk Infra Structure for RT Works;Plastering 12mm thick in Single Coat in CM(1:4)Prop. with sponge finishing including cost and conveyance of all materials and water to site of work and all operational, incidental charges, scaffolding charges, hacking surface and all labour charges, curing etc., complete for finished item of work to the required strength as directed by the dept., for INTERNAL WALLS and EXTERNAL WALLS..
64.62
-
21949
... More
Physical and Trunk Infra Structure for RT Works;Painting to New Wood Work / Iron Work in two coats with Synthetic Enamel Paint in all shades of Grade-I having V&C (Volatile Organic Compound) content less than 50 grams/Liter of aprpoved brand and colour over one coat of Primary coat including cost and conveyance of all materials to work site and all operational, incidential and all labour charges such as sand paper, cleaning the surface, cost of brushes etc., complete for finished item of work as directed by the department (Three coats).
1.78
-
306
... More
Physical and Trunk Infra Structure for RT Works;Painting to new walls with 2 coats of water proof cement paint of apporved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls
64.62
-
14885
... More
Physical and Trunk Infra Structure for RT Works;Construction of 200 KL capacity 17 m staging OHSR for finished work including 2 coats of snowcem painting,lettering, fixing of all required fixtures, pipes, bends, valves, etc. complete as per departmental designs and drawings.Fixtures include:a) RCC or Aluminium ladder inside 0.60 m wide. b) spiral staircase on the outside shall be provided upto 200KL ELSR. Above 200KL ELSR Capacity dog legged staircase shall be provided with staircase flight width of 1.0mts and landing width of 1.20mts with S.S railing upto 1.0 height. c) Lightening arrestor, including conductor and earthing etc with relevant IS codes. d) RCC ventilators with copper or stainless steel fly proof mesh. e) D.I Manholes frame and cover 0.60 x 0.60 m as per IS specifications (light duty) - 2 Nos. f) Water level indicator of good quality with ebonite/ copper float approved pattern - 1 No. g) The ladder shall be with Aluminium and Verticals with HDPE of 10kg/Sqcm shall be provided for single column OHSRs only. h) The railing provided to the gallery and staircase shall be with stainless steel of grade 304 for a height of 1mts I)The railing provided to the gallery and stair case shall be with stainless steel of grade 304 for a height of 1.20mts. J)The dog legged staircase shall be enclosed with brick / CRS wall on three sides and front side with PVC door of standard maker up to 1st brace level from ground level to prevent unauthorized entry. K) D.I swan neck ventilators shall be provided in top dome and slab of M30grade of 17mt staging
200000
-
5095386
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities of OD 347mm Dia. DWC Pipe (300 I.D)
150
-
187295
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities of OD 295mm Dia. DWC Pipe (250 I.D)
260
-
243703
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities of OD 235mm Dia. DWC Pipe (2010 I.D)
230
-
138235
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,Supply and Delivery of Double wall Corrogated structured wall polyethelene/polypropylne piping system class SN-8 with non smooth external annual corrugated &smooth internalsurface (double wall)for non pressure sewage and drainage application pipes of standard length 6m, grade confirming to IS 16098 (part-II-2013) including rubber gasket,transportation to worksite including loading , unloading charges but excluding all taxes etc., complete as directed by the Departmental authorities of OD 180mm Dia. DWC Pipe (150 I.D)
180
-
65443
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities of OD 347mm Dia. DWC Pipe (300 I.D)
150
-
39083
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities of OD 295mm Dia. DWC Pipe (250 I.D)
260
-
71495
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities of OD 235mm Dia. DWC Pipe (2010 I.D)
230
-
40443
... More
Physical and Trunk Infra Structure for RT Works;Lowering,Laying of Class SN 8 Double wall corrogated(DWC) Pipping systemin into ready made trenches,laying true to line and level and perfect linking at joints, encasing the pipe alround with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work as directed by the Departmental authorities of OD 180mm Dia. DWC Pipe (150 I.D)
180
-
19192
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
9
-
61045
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
13
-
138764
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
719.2
-
83298
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
101.25
-
60507
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
147.74
-
11287
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmentalal Authorities
38776.88
-
4491061
... More
Physical and Trunk Infra Structure for RT Works;Supply and Transportation of 5-10 phase 3HP motor,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well of category 1 Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/AryenVarsha/Falcon
5
-
223333
... More
Physical and Trunk Infra Structure for RT Works;Supply of 4 Sqmm FRLS / FRLS-H / HFFR / ZHFR PVC insulated 1100V grade as per IS : 694 / 1990 specification for Copper cable of Category II Makes : Makes: V-Guard/Bonton /Finecab/ HPL / Million /Fortune Art / Sudhakar/Orbit/ Tamra/ Anchor/Plaza/ Vihan/Ollvin/Laser/Beljin/Rhino/ Standard / Vimal
500
-
105083
... More
Physical and Trunk Infra Structure for RT Works;Supply of 125A 4 Pole MCCB Adjustable, Confirms to IEC 60947-2 and IS 13947- Part 1&2 having Breaking Capacity ,25 KA. with thermal magnetic release Panel Mounted of category I Makes : L&T- D shine / Schneider-CVS/Legrand -DP X3/ Siemens- 3VL / Hager-h3/C&S -Winbreak2/HPL-Techno
5
-
70904
... More
Physical and Trunk Infra Structure for RT Works;Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/Seimens/BCH /KSP(Karunya) /Crompton. complete.,.
5
-
41498
... More
Physical and Trunk Infra Structure for RT Works;Drilling of Bore Wells with DTH Righ:- Drilling of Bore well by down the hole hammer with DTH Rig to a finished dia of 165mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation , all cosolidated formation etc, and remaing the bore to subinsertion of required casing pipe etc. including insertio of casing pipe with coup;ings, caps any other relevant material upto required depth as directed by the department, transportion of drilling rigs and supporting vehicle and including bore development . Flushing of Bore Well at an average pressure of 150 PSI conducting yield test. Crew charges done to the satisfaction of the department and includin gall labour charges and all taxes , but excluding the cost of casing pipe etc., The entire work should be carried out as per IS- 2800 Part I &II 1979 and IS 11189 of 1985 and amended from time to time.
300
-
141000
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,supply and delivery of 250 mm dia PVC pipes 6 KG/SQCM conforming to IS: 4985/2000 including transportation to the site including taxes complete for casing pipe
30
-
59614
... More
Physical and Trunk Infra Structure for RT Works;Manufacture,supply and delivery of 180 mm dia PVC pipes 6 KG/SQCM conforming to IS: 4985/2000 including transportation to the site including taxes complete for casing pipe
300
-
297558
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work.
250
-
35505
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 8.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. From Bore wells to Sump
2500
-
355047
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation and depositing on bank for all lifts and with an initial lead of 10mts incluidng all operational, incidental, labour charges, such as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work by mechanical means up to 3.00 Mts depth.
303.75
-
35180
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for Slotting of pipes including all labour charges and sloting as per the directions of the department officers etc. Compelte for 165 mm dia bore wells.
90
-
30780
... More
Physical and Trunk Infra Structure for RT Works;Supplying and fixing of Borewell caps including all charges etc., complete 165mm/180mm dia Borewell.
5
-
1575
... More
Physical and Trunk Infra Structure for RT Works;Conducting Yeild test to source (Bore well) as per " Draw Down Method" duly engaging yield test equipment and supporting vehicles duly engaging necessary skilled and unskilled labour including cost of all materials, hire charges of all equipment cost of fuels and other consumables. transportion charges inclulding all labour charges , taxes etc, complet for test. (Bore Yeild Test)
5
-
6500
... More
Physical and Trunk Infra Structure for RT Works;Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 55.5 & 6 meter for classification K9 suitable for push-on-joint (rubber gasket d jointing) with cement mortar lining inside the pipes with outside zinc coating. Ratesare ex-factory, excluding transportation, taxes and duties. 150 MM Dia
150
-
257400
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 160mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (above 90mm dia. straight length in 6mts.)
100
-
72373
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 110mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (above 90mm dia. straight length in 6mts.)
280
-
97028
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 63 mm Dia. HDPE Pipe of Pressure 6.00 Kg./Sq.Cm. conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work. (above 90mm dia. straight length in 6mts.)
200
-
22724
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 200mm dia(PN-1.0 MPA)
1
-
28607
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 150mm dia(PN-1.0 MPA)
1
-
22046
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 100mm dia(PN-1.0 MPA)
1
-
14172
... More
Physical and Trunk Infra Structure for RT Works;Supply ,delivery and fixing of 50 mm dia Gunmetal gate valve (GM Peet) as per IS-778 Class-I Indian make heavy type including cost and conveyance of all materials to work site, loading, unloading transportation charges etc., complete as directed by the Departmental Authorities
23
-
86391
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 200mm Dia. DI double socket bends conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
8618
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 110mm Dia. HDPE BENDS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
3
-
1507
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 200mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
2
-
6542
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 160mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
3504
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 63mm Dia. HDPE TEES conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
16
-
3108
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 200mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
2
-
1393
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 160mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work
2
-
764
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of 110mm Dia. M.S. FLANGES for jointing conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
6
-
1173
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation and depositing on bank with an initial lead of 10mts and lift of 2mts in sand or loose soils, wet Sand not under water, silt in canals, channels and drains etc., and incluidng all operational, inD.Idental, labour charges, shuch as shoring, sheeting, planking, strutting and dewatering charges etc., complete for finished item of work for Water Supply Main Lines.
554
-
64164
... More
Physical and Trunk Infra Structure for RT Works;Lowering, Laying and Jointing of 160mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
100
-
6863
... More
Physical and Trunk Infra Structure for RT Works;Lowering, Laying and Jointing of 110mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
280
-
12855
... More
Physical and Trunk Infra Structure for RT Works;Lowering, Laying and Jointing of 63mm Dia. HDPE Pipes by butt fusion welding as per IS:7634/Part-II/1975 as amended from time to time to the alighment and gradient and testing the pipe line to the required prpessure including cost and conveyance of all materials to work site and all operational, inD.Idential and all labour charges etc., complete for finished item of work.
200
-
6670
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 200 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
1
-
537
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 150 mm Dia. Sluice Valve including conveyance of all materials to work site, nuts and bolts, rubber packing and white lead and all other charges etc., complete as per the direction of the department for finihsed item of work .
1
-
326
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 100 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
3
-
576
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 200mm dia D.I. Sluice Valve.
2
-
1054
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for jointing DI pipes and valves with Double flanged ends including cost of jointing materials such as bolts, nuts, rubber insertion, white lead and including filling with water with a lead upto 500 Mts. and testing to required pressure and including cost and conveyance of all materials to site of work and all other chrges etc.,complete for 150mm Dia.Sluice Valve.
2
-
972
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for jointing D.I pipes and valves with flanged ends excluding cost and joints materials such as bolts, nuts rubber packing, whilte lead including filling with water conveyance and all other chrges etc.,complete for 100mm Dia. Sluice Valve.
6
-
1897
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
5
-
33914
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of Bolts & Nuts with double washers including cost and conveyance of all materials to site of work, shallok/White lead etc., for flanged joints excluding labour charges for fixing values. ( No.of Bolts for each valve 8 Nos. and total weight of Bolts 1.50 Kg./8 Nos.)
7.5
-
946
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of Rubber Packing including cost and conveyance of all materials to site of work etc., complete ( weight 0.44 Kgs. per joint .)
4.5
-
475
... More
Physical and Trunk Infra Structure for RT Works;Supplying and delivery of 160mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
4
-
1441
... More
Physical and Trunk Infra Structure for RT Works;Supplying and delivery of 63mm Dia. HDPE END CAPS conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading , forwarding charges, labour charges etc., but excluding ExD.Ise duty, Sale Tax and speicals etc., complete for finished item of work.
3
-
228
... More
Physical and Trunk Infra Structure for RT Works;Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with flanged ends carefully into trench and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply. (Reference to specifications. BIS No.3114/1994) for 200mm dia
200
-
22999
... More
Physical and Trunk Infra Structure for RT Works;Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete (PHE-JCIR-4) complete as directed by departmental authorities for 200mm dia
26
-
7123
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, Supplying and delivery of OD 140mm x 160mm Dia. HDPE Reducers conforming to IS.4984-1995 including transportation charges to work site and including cost and conveyance of all materials to work site and loading,unloading, forwarding charges, labour charges etc., but excluding Excise duty, Sale Tax and speicals etc., complete for finished item of work.
34
-
29011
... More
Physical and Trunk Infra Structure for RT Works;Carting of excess excavated material after using the material in filling with in a lead of 4KM
10
-
764
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
1707.75
-
197792
... More
Physical and Trunk Infra Structure for RT Works;Filling with Sand for Foundations with initial lead in layers not exceeding 15 Cm. thick consolidating each deposited layer by watering and ramming including cost and conveyance of all materials and water to work site and all operational, incidental charges and all labour charges, hire charges of T&P etc., complete for finished item of work and as directed by the Departmental Authorities.
155.25
-
92777
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities
155.25
-
590664
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete as directed by the Departmental authorities for Drain bed.
155.25
-
765442
... More
Physical and Trunk Infra Structure for RT Works;P.C.C. work of mix M15 (1:2.5:5) Prop.20 mm Graded hard broken granite machine crushed graded metal incluidng cost and conveyance of all materials and water to work site and all labour charges, and all operational charges incidental machine mixing charges, laying, curing etc., complete including formwork/ centering charges, as directed by the Departmental authorities for Drains walls.
474.38
-
3569351
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M 20 Grade Concrete for RCC works corresponding to IS 456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete with minimum cement content as per IS code from standard suppliers approved by the department and also including centering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work as per directed by the Departmental authorities for Drain slab.
87.6
-
518903
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
6.57
-
540535
... More
Physical and Trunk Infra Structure for RT Works;Construction of granular sub-base by providing well graded material for grading-III spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.(CBR Value Minimum 30) including Cost and conveyance of all materials, all hire and operational charges of T&P etc., complete for finished item of work as directed by the Departmental Authorities
819.38
-
898589
... More
Physical and Trunk Infra Structure for RT Works;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.
977.5
-
1872519
... More
Physical and Trunk Infra Structure for RT Works;Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means as per MORTH specification and as directed by the Engineer-in-Charge.
4887.5
-
166224
... More
Physical and Trunk Infra Structure for RT Works;Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom for finished item of work as per MORTH & H and as directed by the Engineer-in-Charge.
4312.5
-
32214
... More
Physical and Trunk Infra Structure for RT Works;Providing and laying of 50mm thick bituminous macadam with HOT Mix Plant producing an average output of 37.50 tonnes per hour using hard blasted granate crushed aggregates of Grade.II premixed with bituminous binder of V.G. 10 (80/100) grade @ 3.30% by weight of total mixer, transported to site laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and operational charges all T&P and all other contingent charges necessay including cost of seigniorage charges on all materials etc., complete and as per MORTH Specification.Note: Quantity of bitumen is proposed for rate analysis only. The actual quantity will deperd upon job mix formula.
215.63
-
1420823
... More
Physical and Trunk Infra Structure for RT Works;Providing 25mm thick compacted semi dense bituminous concrete by hot mix plant using hard blasted granite crushed aggregate of grading-II premixed with bituminous binder V.G.30 (60/70) grade @ 4.5 per cent of mix and filler, transporting the hot mix to work site, laying with a Mechnical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification complete for finished item of work in all respects as directed by Engineer-in-charge.Note: The percent of bitumen is proposed for rate analysis only. The actual percent shall be arrived based on job mix formula.
107.81
-
861008
... More
Physical and Trunk Infra Structure for RT Works;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH as directed by the Departmental Authorities
939.3
-
108790
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course.
93.93
-
357366
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities for Foottings.
303
-
2623738
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of VRCC. M20 grade design mix concrete corresponding to IS-456 using CONCRETE MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing,centering, laying concrete, vibrating,curing etc.,complete but excluding cost of steel and its fabrication charges with minimum cement content as per IS code from standard suppliers approved by the department etc. complete for finished item of work as directed by the Departmental authorities,,for WALL
454.5
-
5335240
... More
Physical and Trunk Infra Structure for RT Works;Providing weep holes with 75 mm dia . Of required length with PVC pipe of make (Sudhakar/nandi/prince) conforming to IS 49851:2000 of 4.00 kg/sq cm pressure and bell mouth finishing at inlet including cost , all taxes and all labour charges for conveyance to site cutting into required sizes , placing in position maintaing slopes as diorected by engineer in charge etc.. inncluding metal spall backing x 30 cms size in rear complete for weep holes in all respects as per the specification and dirtection of engineer in charge for retaining walls. (RM)
533.28
-
45441
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
68.17
-
5608973
... More
Physical and Trunk Infra Structure for RT Works;Construction well curb in RCC M30 Grade design mix including cost and conveyance of all materials and labour charges from work curing and complete , but excluding cost of steel for reinforcement as directed by departmental authorities
3.61
-
21278
... More
Physical and Trunk Infra Structure for RT Works;Construction well steining in RCC M30 Grade design mix including cost and conveyance of all materials and labour charges from work curing and complete , but excluding cost of steel for reinforcement as directed by departmental authorities
48
-
285419
... More
Physical and Trunk Infra Structure for RT Works;Sinking of wells 4.00 m internal dia in sandy and other loose soils under water either by manual labour divers or by dredgers weighing the top of staining to assist the sinking etc., including dewatering to the extent necessary mechanical equipment crew charges etc., complete for the infiltration wells for the following depths for finished item of work as directed by departmental authorities for 0 to 2 mts below water level
2
-
70146
... More
Physical and Trunk Infra Structure for RT Works;Sinking of wells 4.00 m internal dia in sandy and other loose soils under water either by manual labour divers or by dredgers weighing the top of staining to assist the sinking etc., including dewatering to the extent necessary mechanical equipment crew charges etc., complete for the infiltration wells for the following depths for finished item of work as directed by departmental authorities for 2 mts to 4 mts below water level
2
-
319733
... More
Physical and Trunk Infra Structure for RT Works;Sinking of wells 4.00 m internal dia in sandy and other loose soils under water either by manual labour divers or by dredgers weighing the top of staining to assist the sinking etc., including dewatering to the extent necessary mechanical equipment crew charges etc., complete for the infiltration wells for the following depths for finished item of work as directed by departmental authorities for 4 mts to 6 mts below water level
2
-
356800
... More
Physical and Trunk Infra Structure for RT Works;Sinking of wells 4.00 m internal dia in sandy and other loose soils under water either by manual labour divers or by dredgers weighing the top of staining to assist the sinking etc., including dewatering to the extent necessary mechanical equipment crew charges etc., complete for the infiltration wells for the following depths for finished item of work as directed by departmental authorities for 6 mts to 8.00 mts below water level
2
-
360555
... More
Physical and Trunk Infra Structure for RT Works;Sinking of wells 4.00 m internal dia in sandy and other loose soils under water either by manual labour divers or by dredgers weighing the top of staining to assist the sinking etc., including dewatering to the extent necessary mechanical equipment crew charges etc., complete for the infiltration wells for the following depths for finished item of work as directed by departmental authorities for 8.00 mts to 10.00 mts below water level
2
-
409917
... More
Physical and Trunk Infra Structure for RT Works;Sinking of wells 4.00 m internal dia in sandy and other loose soils under water either by manual labour divers or by dredgers weighing the top of staining to assist the sinking etc., including dewatering to the extent necessary mechanical equipment crew charges etc., complete for the infiltration wells for the following depths for finished item of work as directed by departmental authorities for 10.00 mts to 11.00 mts below water level
1
-
205242
... More
Physical and Trunk Infra Structure for RT Works;Sinking of wells 4.00 m internal dia in sandy and other loose soils under water either by manual labour divers or by dredgers weighing the top of staining to assist the sinking etc., including dewatering to the extent necessary mechanical equipment crew charges etc., complete for the infiltration wells for the following depths for finished item of work as directed by departmental authorities for 11.00 mts to 11.85mts below water level
0.85
-
174697
... More
Physical and Trunk Infra Structure for RT Works;Providing plugging of well with 40 mm HBG chips including cost and conveyance of all materials and labour charges etc., complete as directed by departmental authorities
9.42
-
12326
... More
Physical and Trunk Infra Structure for RT Works;Providing plugging of well with 12 to 20 mm HBG metal including cost and conveyance of all materials and labour charges etc., complete as directed by departmental authorities
10.89
-
19205
... More
Physical and Trunk Infra Structure for RT Works;Supply and placing of the Design Mix M30 grade Concrete corresponding to IS 456 using Cocrete MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work for,for Roof slab
2.49
-
13929
... More
Physical and Trunk Infra Structure for RT Works;Supply and fabrication of structural steel for girders, angles includiing labour charges for cutting, welding, and all operational and incidental charges etc complete as directed by departmental authorities.
288.8
-
26118
... More
Physical and Trunk Infra Structure for RT Works;Supply and fixing of man hole FRC frame and covers etc., complete as directed by departmental authorities
2
-
5194
... More
Physical and Trunk Infra Structure for RT Works;Supply and fixing of 32 mm dia PVC of 6kg/sqcm at 150 mm C/C including fixing in steining wall in Zigzag manner as directed by departmental offficers
112.5
-
2045
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.15
-
12537
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.36
-
29699
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.2
-
16388
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
5.28
-
434386
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete as directed by departmental authorities 0 M To 1.00 M Depth
275
-
433793
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete as directed by departmental authorities 1 M To 2.00 M Depth
225
-
508406
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete as directed by departmental authorities 2.00 M To 5.00 M Depth
525
-
1780490
... More
Physical and Trunk Infra Structure for RT Works;Earth work excavation for infiltration gallery in all soils under water including all leads shoring strutting bailing out of water and removal of shoring after completion of pipeline work includeing all labour charges etc., complete as directed by departmental authorities 5.00 M To 6.00 M Depth
125
-
504919
... More
Physical and Trunk Infra Structure for RT Works;Manufacture supply delivery of 400 mm RCC perforated NP3 class pipes conforming to BIS-458/2003 including perforatation charges, cost of rubber rings, transportation including cost and conveyance of all meterials and all taxes, duties and all labour charges for laying and jointing etc., complete as directed by departmental authorities
50
-
93500
... More
Physical and Trunk Infra Structure for RT Works;Lowering the RCC S/S pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 etc., complete as directed by the departmental authorities (PHE- LRCS-9(IX) complete as directed by departmental authorities
50
-
11730
... More
Physical and Trunk Infra Structure for RT Works;Laying of 40 mm HBG metal as filter meterial as per approved section of infiltration gallery includeing all costs ans conveyance of meterials and labour charges etc.,complete as per SS
102.69
-
134370
... More
Physical and Trunk Infra Structure for RT Works;Laying of 12 to 20 mm HBG metal asn filter meterial as per approved section of infiltration gallery includeing all costs ans conveyance of meterials and labour charges etc.,complete as per SS
97.31
-
171609
... More
Physical and Trunk Infra Structure for RT Works;Laying 6 to 12 mm HBG metal asn filter meterial as per approved section of infiltration gallery includeing all costs ans conveyance of meterials and labour charges etc.,complete as per SS
215.19
-
302725
... More
Physical and Trunk Infra Structure for RT Works;Supply and erection of 2 no's of pumpsets of each 11.20 KW at dishcarge of 11 lps having a total head of 61 m. omplete as directed by departmental authorities
22.4
-
896000
... More
Physical and Trunk Infra Structure for RT Works;Earthwork excavation in all kinds of soil for Pipe line trenches as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material, dressing of sides and bottom as per Technical Specification 304 MORTH and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying sewer/water lines including divertion of traffic and backfilling in trenches with excavated suitable material and disposal of remaining earth upto a lead of 50 m, including all incidental and operational charges etc., complete for Pipe Lines by mechanical means. Complete as directed by departmental authorities
1075.2
-
124530
... More
Physical and Trunk Infra Structure for RT Works;RBR-FNDN-1- (iv) - In hard rock blasting required : Earthwork excavation in hard rock with blasting for Pipe line trenches as per drawings and technical specifications including setting out, construction of shoring and bracing, removal of stumps and other deleterious material, dressing of sides and bottom as per Technical Specification 304 and as directed by the departmental officer including protecting the existing utility services wherever it is possible during the execution and taking all precautionary measures in the restricted areas for laying water lines including divertion of traffic including all incidental and operational charges etc., complete as directed by departmental authorities
268.8
-
262849
... More
Physical and Trunk Infra Structure for RT Works;Centrifugally cast (Spun) Ductile Iron pressure pipes for water, gas and sewage with Socket Spigot ends conforming to IS.: 8329/2000 in standard working lengths of 4, 5, 5.5 & 6 meter for classification K9 & K7 suitable for push-on-joint (rubber gasket jointing) with cement mortar lining inside the pipes with outside zinc coating. Rates are ex-factory, including transportation,. complete as directed by departmental authorities
1600
-
2884640
... More
Physical and Trunk Infra Structure for RT Works;PHE-LCIS-1: Lowering C.I. / D.I. Pipes (all classes) and specials (fittings) with s/s ends carefully into trenches and laying them true to alignment and gradient including all sundries but excluding cost and conveyance of pipes from source of supply (Ref to specifications. BIS No.3114/1994) complete as directed by departmental authorities for 150mm dia
1600
-
126784
... More
Physical and Trunk Infra Structure for RT Works;Jointing C.I., D.I. pipes and fittings with rubber gasket (push-on-joint), including the cost of the gasket but including all sundries filling with water, with a water lead up to 500m and testing to required pressure, etc. complete (PHE-JCIR-4) complete as directed by departmental authorities for 150mm dia
291
-
73108
... More
Physical and Trunk Infra Structure for RT Works;Manufacturing and supply of MS pipes using MS plate manufactured with electric - resistance welding (ERW) or submerged arc welding (SAW) process longitudinally or spirally welded from MS plates confirming to IS:2062, Grade-`A'/ 'B' in suitable lengths including painting with epoxy in tow coats over a premary coat of red oxide including cost of MS Plates , welding rods and all other required materials, and inclusive of all taxes and duties and delivery of fabricated inlined and outcoated pipes to site and hoisting and carefully lowering the pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with wire mesh and cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers for 150 mm dia MS pipe
1800
-
165651
... More
Physical and Trunk Infra Structure for RT Works;Lowering MS pipes into ready made trenches or keeping in position on ready built pedestals or supports and laying them true to alignment and gradient and perfect lining by jacking and joinitng with three run arc welding and inlining and outcoating of field welded joints with wire mesh and cement mortar as per the above specification inclusive of cost of all jointing materials, labour charges and other incidental and operational charges etc., complete as directed by departmental officers for 150 mm dia MS pipe
30
-
9884
... More
Physical and Trunk Infra Structure for RT Works;Painting with epoxy paint for MS Pipes in two coats over a epoxy primer including cost and conveyance of all materials cost of brushes and sundries etc complete as directed by departmental authorities.
60.29
-
14384
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 150mm dia(PN-1.6 MPA)
1
-
24338
... More
Physical and Trunk Infra Structure for RT Works;Supply and delivery of "Resilient Seated Soft Sealing" Gate Valves (Sluice Valves) with Body and Bonnet of Ductile Iron GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 and Wedge fully Rubber Lined with food grade quality grade W270 grade EPDM, Replaceable Spindle Nut without gland packing with 3-O ring protection system on the Shaft and Seals of NBR. The Valves should be Vacuum tight and 100% leak proof with face to face dimensions as BS:5163 Type A/IS:14846. All the valves should be with fusion bonded Electrostatic Powder coating both inside and outside (Min 250 Microns)- RAL 5005 with Pocket Less Straight through body Passage conforming to Design standards of DIN-3202F4/BS:5163 Type A Flange drilling as per IS - 1538 excluding all taxes, duties and transportation. for 100mm dia(PN-1.6 MPA)
1
-
15457
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 100 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
1
-
192
... More
Physical and Trunk Infra Structure for RT Works;Lowering and keeping in position of 150 mm Dia. Sluice Valve including conveyance of all materials to work site and nuts and bolts,rubber packing and shallock and all other charges etc., complete as per the direction of the department for finihsed item of work .
1
-
326
... More
Physical and Trunk Infra Structure for RT Works;PHE-JCIF-5-: Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) complete as directed by departmental authorities. 100mm dia Sluice Valves
3
-
949
... More
Physical and Trunk Infra Structure for RT Works;PHE-JCIF-5-: Jointing DI pipes, fittings and valves with flanged ends including cost of jointing materials such as bolts, rubber insertion, white lead including filling with water, with lead up to 500 meters and testing to required pressure complete. (Reference to specifications. BIS No.3114/1994.) complete as directed by departmental authorities. 150mm dia Sluice Valves
3
-
1460
... More
Physical and Trunk Infra Structure for RT Works;Manufacture, supply and delivery of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality.S Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538. complete as directed by departmental authorities. 50mm dia Air Valves
3.2
-
51440
... More
Physical and Trunk Infra Structure for RT Works;Labour charges for fixing Kinetic Air Valves with isolating Sluice valves, Double Air valves/ Air Cushion valve excluding cost of jointing materials such as bolts, nuts and rubber insertions etc., complete as directed by departmental authorities. 50mm dia Air Valves
3.2
-
1012
... More
Physical and Trunk Infra Structure for RT Works;Constructing 904.0mm (3?0?)dia solid block masonry inspection chamber as per IS-4111:Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10N/sq.mm including plastering with cementmortar 1:3 prop; ½? thick both inside and outside fitted with20?diaRCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sortsof soils (excluding rock) and laying cement concrete (1:4:8)150 mmthick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel100mm thick as per Standard specifi cationandincludingcostandconveyanceofall materials like cement,sand,bricks,water etc.,tosite,cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar,constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
5
-
53371
... More
Physical and Trunk Infra Structure for RT Works;Laying PCC work of mix (1:4:8) Prop.using 40mm gauge hard broken granite machine crushed metal including cost and conveyance of all materials and water to worksite and all operational, incidental, labour charges, machine mixing, laying, levelling, tamping, curing,etc., complete as directed by the Departmental authorities for Levelling course.
3.11
-
11832
... More
Physical and Trunk Infra Structure for RT Works;Vibrated cement concrete M20 using graded HBG metal including cost and conveyance of all materials land labour charges for centering, machine mixing, laying, vibrating and curing etc. including all other incidental charges of all T&P etc. for finished item of work as per MoRTH apecifications 1500, 1700, 2100 and 2702 and as directed by the depermental engineers in charge. RBR - FNDN Vol 4 B ii
18.63
-
154583
... More
Physical and Trunk Infra Structure for RT Works;Providing High Yield Strenth Deformed (HYSD)/Thermo Mechanically Treated (TMT) Steel bars ( Fe.500 grade as per IS1786 and as amended upto date) of different of diameters for RCC works, including labour charges for srraightening,cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of steel bars, all wastage, such as over laps, couplings, chairs, spacer bars, binding wire,cover blocks and all incidental, Operational labour charges such as cutting, bending,placing in position, tying etc., complete for finished item of work as directed by the Departmental authorities
0.93
-
76635
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements