Andhra Pradesh Tourism Development Corporation Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Tourism Development Corporation - APTDC Tender
Civil And Construction
Civil Works Others
Building Construction
Opening Date11 Jan 2022
Closing Date25 Jan 2022
Tender Amount₹ 6,74,34,379
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 20,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
469574Tender No
NIT No:09/SE/APTDC/Engg/2021-22, Dt: 11.01.2022 (2nd call)Tender Authority
Andhra Pradesh Tourism Development Corporation ViewPurchaser Address
-Website
http://https://tourism.ap.gov.in/home
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Uppada;Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Liters/ Sqm of the vertical surface & @ 5.0 Liters/ Sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc complete for finished item of work as per the approval of the Engineer-in-Charge
1745
-
586320
Uppada;Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140)
46
-
243441
Uppada;Filling with Carted earth in trenches, sides of foundations & basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of sand / gravel for finished item of work. (APSS No 309 & 310).
2050
-
738000
Uppada;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66
-
-
-
Uppada;PLINTH BEAMS
75
-
854250
Uppada;PCC - STEPS
7
-
48664
Uppada;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch)
-
-
-
Uppada;COLUMN GROUND FLOOR 4.27 M
96
-
1077869
Uppada;COLUMN FIRST FLOOR 4.27 M HEIGHT
82
-
968296
Uppada;COLUMNS FLOOR TERRACE 4.27 M
9
-
111503
Uppada;LINTELS 3.66 M
-
-
-
Uppada;LINTELS 3.66 M GROUND FLOOR
10.2
-
110869
Uppada;LINTELS 3.66 M FIRST FLOOR
12.1
-
137377
Uppada;LINTELS 3.66 M SECOND FLOOR TERRACE
1
-
11837
Uppada;RCC WALL 300 mm thick
-
-
-
Uppada;GROUND FLOOR
51
-
142762
Uppada;FIRST FLOOR
37
-
118030
Uppada;WATER TANK TERRACE SECOND FLOOR
30
-
107423
Uppada;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 using Batching Plant at 20 Cum per hour,Transit mixer 4Cum capacity and concrete Pump with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for RCC SLABS, BEAMS
-
-
-
Uppada;Roof Beam ground floor 4.27 M Height
58.3
-
590010
Uppada;Roof beam first floor 4.27 M Height
58.3
-
612851
Uppada;Head room TERRACE 2nd floor for staircases 3.66M height
10.6
-
108916
Uppada;Beam ground floor 3.66M Height
16.25
-
155168
Uppada;Beam First floor 3.66M Height
16.25
-
161053
Uppada;Ground floor roof slab 150 MM THICK 4.27 M HEIGHT
1766
-
2438824
Uppada;First floor roof slab 150 MM THICK 4.27 M HEIGHT
1766
-
2807691
Uppada;TERRACE floor roof slab 150 mm THICK
61.1
-
109821
Uppada;TERRACE FLOOR WATER TANK 175 MM THICK BOTTOM SLAB 3.66M Height
133
-
251759
Uppada;TERRACE FLOOR WATER TANK 100 MM THICK TOP SLAB
133
-
188721
Uppada;Waist slab 175 MM THICK
-
-
-
Uppada;Ground floor
32
-
47400
Uppada;First floor
32
-
53968
Uppada;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.for:-Sun Shade-Slab thk 62.50
-
-
-
Uppada;SUNSHADES GROUND FLOOR
91
-
72681
Uppada;SUNSHADES FIRST FLOOR
112
-
112698
Uppada;SUNSHADES TERRACE FLOOR
1.46
-
1775
Uppada;Supplying, fitting and placing HYSD (Fe 500/ tmt grade as per IS 1786-1985) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work
-
-
-
Uppada;HYSD - GROUND FLOOR
35
-
2638782
Uppada;HYSD - FIRST FLOOR
25.5
-
1940794
Uppada;HYSD -TERRACE second FLOOR
4.53
-
348019
Uppada;Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No 501 & 504).
-
-
-
Uppada;GROUND FLOOR
285
-
1864185
Uppada;FIRST FLOOR A & E BLOCK
282
-
1996278
Uppada;TERRACE FLOOR HEAD ROOM
77
-
564179
Uppada;Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No of 501 & 509)
-
-
-
Uppada;GROUND FLOOR
436
-
347526
Uppada;FIRST FLOOR
373
-
346272
Uppada;Plain Cement Concrete (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size nominal aggregate machine crushed hard granite metal (coarse aggregate) from approved quarry from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all materials and including all charges for mixing, laying concrete, curing etc., complete for finished item of work. (APSS No 402) for:-Hand Mix-PCC (1:3:6) NOMINAL MIX
-
-
-
Uppada;GROUND FLOOR
1.5
-
7538
Uppada;FIRST FLOOR
1.6
-
8055
Uppada;Plastering 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for External & Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 20 mm
-
-
-
Uppada;GROUND FLOOR
1187
-
482802
Uppada;FIRST FLOOR
1366
-
617786
Uppada;TERRACE FLOOR
351
-
172367
Uppada;Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 12 mm
-
-
-
Uppada;GROUND FLOOR
1247
-
484538
Uppada;FIRST FLOOR
1436
-
623340
Uppada;TERRACE FLOOR
351
-
165986
Uppada;Ornamental plastering to ceiling 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Ceiling Plastering 2/c in CM (1:3) & (1:5): 12 mm
-
-
-
Uppada;GROUND FLOOR
1890
-
742974
Uppada;FIRST FLOOR
1910
-
859388
Uppada;SECOND FLOOR (TERRACE)
133
-
65526
Uppada;Providing impervious coat to exposed RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like sand, water proofing compound, water etc., to site, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including providing 4" coving with cement concrete in (1:2:4) prop. rounding off the wall and slab junction etc., complete for finished item of work. (APSS No 901 & 903) for:-Impervious coat CM(1:3), 20mm
-
-
-
Uppada;GROUND FLOOR
166
-
71668
Uppada;FIRST FLOOR
41.04
-
19120
Uppada;SECOND FLOOR SLAB (TERRACE)
1914.01
-
957154
Uppada;Providing and laying cinder concrete in cement cinder mix (1:15) prop. using 12.5 mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials, water to work site, and all operational, incidental, labour charges, such as mixing cement & cinder etc. complete for finished item of work
-
-
-
Uppada;FIRST FLOOR
6.21
-
16493
Uppada;Flooring with Vitrified tiles of size 600 x 600 mm not less than 8 to 10mm thick normal colour 1st quality set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with 3mm Nylon spacers at each corner of the tile andn joints grooted with laticrete epoxy grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed)cost of on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No707 & 701)
-
-
-
Uppada;GROUND FLOOR
861
-
1023224
Uppada;FIRST FLOOR
861
-
1056039
Uppada;Skirting with Vitrified tiles of size 600 x 600 mm not less than 8 to 10mm thick normal colour 1st quality thick internal wall to 12.5cm height with length equal to flooring stones and matching the flooring joint lines and set over a base coat of CM (1:5) prop. 12mm thick and filling the joints with laticrete epoxy grout of approved shade pigment match the lines of tiles slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed)cost of on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No707 & 701)
-
-
-
Uppada;GROUND FLOOR
36.5
-
42962
Uppada;FIRST FLOOR
36.5
-
44354
Uppada;Flooring with non-skid ceramic tiles of size 300 x 300 mm not less than 7.3 mm thick set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed)cost of on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No707 & 701)
-
-
-
Uppada;GROUND FLOOR
87
-
76605
Uppada;FIRST FLOOR
42
-
38582
Uppada;Dadooing to walls with Glazed coloured Tiles of any size Ist Quality as approved by Engineer, 7mm thick, shade and make set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per Sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, cost of on materials and all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.
-
-
-
Uppada;GROUND FLOOR
226
-
180766
Uppada;FIRST FLOOR
123
-
99559
Uppada;Flooring with Granite Floor tiles of size 600 x 300 mm not less than 8 mm thick of premium quality set over a base coat of CM (1:6) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed)cost of on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No707 & 701)
-
-
-
Uppada;GROUND FLOOR
343
-
476992
Uppada;FIRST FLOOR
343
-
484696
Uppada;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of granite over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, granite slabs, white cement etc., to site (excluding cost of C.C. bed)cost of on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No707 & 701)
-
-
-
Uppada;GROUND FLOOR
14.4
-
52059
Uppada;FIRST FLOOR
14.4
-
53074
Uppada;S&F with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) other than black and regular colours in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per Sqm including cost and conveyance of all materials like cement sand, water flooring stones etc. to site cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges etc. complete for finished item of work for Risers and Treads of stair cases (APSS No701 & 707) Risers of 0.15m height
-
-
-
Uppada;Risers of 0.15m height
-
-
-
Uppada;GROUND FLOOR
12.42
-
46792
Uppada;FIRST FLOOR
12.42
-
46955
Uppada;S&F with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) other than black and regular colours in single piece with edges Rounded and set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per Sqm including cost and conveyance of all materials like cement sand, water flooring stones etc. to site and cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges etc. complete for finished item of work for Treads & Window Sills & platform tops in the floor (APSS No701 & 707) Treads of 0.3 m height
-
-
-
Uppada;Treads of 0.3 m height
-
-
-
Uppada;GROUND FLOOR
25
-
109042
Uppada;FIRST FLOOR
25
-
109700
Uppada;Supplying and fixing stainless steel hand railing, balustrade etc using 304 or 202 grade stainless steel pipes of 50 mm dia nominal bore for hand railing at 3'0" high from ground level and 40 mm dia nominal bore for vertical supports placed at 5'0" c/c and two numbers 25 mm dia nominal bore for horizontal pipes placed below hand railing pipe as per the approved drawing including cost and conveyance of all materials buffing charges polishing charges etc complete for finished item of work. (50mm dia @4.57kg/Rmt, 40mm dia @3.61kg/Rmt and 25mm dia @2.46kg/Rmt
-
-
-
Uppada;GROUND FLOOR
37
-
218308
Uppada;FIRST FLOOR
61
-
359913
Uppada;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) openable doors with openable shutters duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.0 mm for outer frames, 70 mm x 60 mm x 2.25 mm for mullion sections as per the need and 102 mm x 60 mm x 2.0 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant and accessories for openable door - hinges of stainless steel grade 304- 3 Nos., per shutter handle with mazak alloy casting 1 No per shutter, locking system suitably concealed 1 No, with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work
29
-
270737
Uppada;Supply and fixing Teak Wood framed FLUSH Doors single shuter door with flush shutter as per approved drawings with best quality 2nd class teakwood frame of size 115x65mm and flush door shutters of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping as per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost of Powder Coated/ Chromium Plated Mild Steel fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm, 2 No tower bolt of 250x12mm dia, 1 No CP Aldrops - 300 mm long and 2 Nos. CP handles of 150 mm size & 1 No 63 mm long door stopper including fixing the fixtures to door with required Noof brass screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002
104
-
708355
Uppada;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows two track sliding duly manufactured using UPVC reinforced profiles of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.0 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No, per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item
-
-
-
Uppada;Ground floor
242
-
2215533
Uppada;First floor
288
-
2636668
Uppada;Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 x 55 mm with reinforcement of 1 mm thickness and Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm thickness. Ventilator shall be provided with 4.5 mm Pin Head glass,
6.68
-
44268
Uppada;Providing Mild Steel, Structural Steel, I.e., Angles, Channels and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welede joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position etc. complete for finished item of work.
2720
-
265845
Uppada;Supplying and finishing (Two coats of HI-BOND Wall Putty Super Fine (Water Resistant) or Equivalent) to interior faces of new walls and ceiling of approved colour as per manufacturers specification including cost and conveyance of materials to site and labour charges such as preparing the wall, applying primary coat etc, complete including of Painting with Acrylic emulsion paint of dulux supreme 3 in a or equivalent brand to interior faces of new walls and ceiling with two coats of approved make, shade and colour over a base coat of primer approved make including cost and conveyance of materials like Acrylic emulsion etc., to site and labour charges such as preparing the wall, applying primary coat, applying two coats of Acrylic emulsion etc., sales and other taxes on cost of all materials, complete for finished item of work in all floors as directed by Engineer-in-charge.
7900
-
1982900
Uppada;Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats
3925
-
737900
Uppada;Painting to new wood works with 2 coats of approved synthetic enamel paint of approved brand and shade over 1 coat of wood primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to wood work - Synthetic enamel paint to New Wood Work - 2 coats + 1 coat wood primer Cellar
95
-
14820
Uppada;Painting to new iron works with 2 coats of synthetic enamel paint of approved brand and shade over 1 coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats + 1 coat Iron primer
175
-
25200
Uppada;Supply of Paving tiles high strength Cement Concrete interlocking Designer Pavers of 60 mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour pigmentation with imported colours and white cement to get required reflective glazing inclusive of all taxes and set over a base coat of Sand bed 12mm thick including cost and conveyance of all materials like sand, water, tiles, etc., to site, cost of on materials and all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work PHOENIX or Equivalent as directed by Engineer-in-charge.
120
-
66360
Uppada;Designing, providing and fixing Top Hung shutters in Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ?D? quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72 mm and the glass holding section made of 304 grade stainless steel of 0.6 mm thick, duly providing stiffeners inside the colour coated steel/powder coated sections as per the design requirement, calculations to suit wind pressures as given in IS 875 and primer coat with epoxy primer of 5-7 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick and the outer frame of 20 mm x 58 mm x 0.6 mm, shutter sections of 58 mm x 33 mm x 0.72 mm, stiffener sections of 56 mm x 31 mm x 1mm, hinges ? 2 Nos for each shutter and aluminium Stays ? 2 Nos. for each shutter, aluminium Handle ? 1 No for each shutter including cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and scaffolding charges, form work etc. complete for finished item of work
17
-
103428
Uppada;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.
-
-
-
Uppada;GROUND FLOOR
55
-
52528
Uppada;FIRST FLOOR
152.78
-
145906
Uppada;INTERNAL SANITARY FITTINGS & FIXTURES
-
-
-
Uppada;Supply, Installation and commissioning approved make floor mounted EWC (suit) CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour
19
-
186865
Uppada;Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm duly providing constructing Brick masonry seat and CC Squatting plate including cost and conveyance of all materials and labour charges etc complete as per standard practice for finished item of work
19
-
43415
Uppada;Supplying and fixing of PVC Low Level System Parry ware/ slim line with complete internal components, short bend 10 Litres capacity Single Flush & 15 mm PVC Nylon connection with checknuts and 15 mm Angular CP Stop cock
19
-
39539
Uppada;Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make (HSW/Parry/Neycer) : 410 x 265 x 305 mm
9
-
25551
Uppada;S & F 38.1 mm C.P waste coupling Half or Full Thread 1st Quality Indian make Parryware or equivalent
9
-
2196
Uppada;Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality
9
-
234
Uppada;Supplying & fixing 4 " x 24 " (101.6x609.6mm) white glazed porcelain channel fixed in brick masonry white cement pointing
6
-
2436
Uppada;Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: including cost of 50mm dia pvc pipe, 12.7 mm PVC connection with brass union nut C.P coated and concealed stop cock 12.7 mm (1/2") etc compete for 550 x 400 mm - Single C.P. Pillar cock
9
-
24516
Uppada;Supplying and Fixing Pedestal for Wash Hand Basin (H.S.W / Parry / Earthenware) including Labour charges only for fixing pedestal for wash hand basin
9
-
11619
Uppada;Supplying & fixing of 1st quality 3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand)
37
-
3737
Uppada;INTERNAL DRAINAGE PIPE LINE
-
-
-
Uppada;Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No 1302 1319 & 1326) For 75mm dia
64
-
12470
Uppada;Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No 1302 1319 & 1326) For 110mm dia
338.74
-
97625
Uppada;EXTERNAL SANITARY/DRAINAGE ARRANGEMENTS
-
-
-
Uppada;Supplying and fixing 152.40 mm (6") x 101.60 mm (4") SWG gully trap of 1st class traps of ISI make conforming to IS: 651 & IS: 4127with C.I. grating and constructing single brick masonry wall chamber of size 20" x 14" x 12" in CM (1:6) pro. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost & conveyance to site, labour charges, etc. complete for finished item of work. (APSS No 1326)
9
-
5193
Uppada;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
10
-
67830
Uppada;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
8
-
85392
Uppada;Cutting holes in stone masonry & basement and repairs Labour charges only for drainage pipe lines
3
-
258
Uppada;Cutting holes in Brick masonry & repairs Labour charges only for water supply pipelines
3
-
171
Uppada;Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4mm (3'.0") depth and refilling watering and tamping etc complete for finished item of work 101.4 mm (4") dia
100
-
44800
Uppada;INTERNAL WATER SUPPLY FITTINGS & FIXTURES
-
-
-
Uppada;Supply and fixing tested Chromium plated Short Body Bib Cock of fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent approved make chromium plated 400 grams with CP Wall flanges complete for all floors, including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge.
47
-
29375
Uppada;Supply & fixing towel rod (CP) of 24" long and 3/4 " dia
30
-
12180
Uppada;Supplying and fixing Glass frameless mirror and plywood back with CP screws of size 609.6 mm x 457 .2 mm (24" x 18") Indian make best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
9
-
4851
Uppada;S & F angle stop cock 12.7 mm dia first quality Indian Make heavy duty Seiko/ Senior/ Nice or equivalent
9
-
4374
Uppada;INTERNAL WATER SUPPLY PIPE LINE
-
-
-
Uppada;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
-
-
-
Uppada;22.20mm OD pipe BMW-I.227/821
74
-
5402
Uppada;28.60mm OD pipe BMW-I.228/822
81
-
13932
Uppada;34.90mm OD pipe
92
-
25116
Uppada;41.30mm OD pipe
154
-
57596
Uppada;Supplying & fixing tested gun metal peet valve of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. 25 mm Nominal Bore
9
-
11259
Uppada;Supplying & fixing tested gun metal peet valve of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. 32 mm Nominal Bore
5
-
9495
Uppada;Supplying & fixing tested gun metal peet valve of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. 40 mm Nominal Bore
1
-
2565
Uppada;Supply & fixing of Sintex /Aqua tech or equivalent Polyethylene water storage tank double layer confirming to ISI 12701/96 mark with lid.
5000
-
35000
Uppada;Providing 110 mm Dia ISI marked PVC (Sudhakar / Nandhini) down water take pipes with socket , 2.5mm thick 2.5kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., complete for finished item of work. (APSS No 1328)
48
-
17472
Uppada;HOSTEL BLOCK
-
-
-
Uppada;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS 20B (ApSS 308) in Ordinary Soil-Mechanical Means-Upto 3M depth
1073
-
217437
Uppada;Filling with Quarried stone 150 - 200 mm size for Hand Broken in trenches, sides of foundations & basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance for finished item of work. (APSS No 309 & 310).
105
-
91251
Uppada;Filling with Sand in trenches, sides of foundations & basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of sand / gravel for finished item of work. (APSS No 309 & 310).
160
-
82880
Uppada;Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for foundation levelling courses and below flooring beds using 40mm size (SS5) hard Granite metal upto Plinth level from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all materials and including all charges for mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No 402) for:-Machine Mix-PCC (1:4:8) NOMINAL MIX
85
-
369325
Uppada;Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site,cost of on all materials and all incidental and operational, labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140)
23
-
107134
Uppada;Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS No 309 & 310)
510
-
14669
Uppada;Filling with Carted SELETED earth in trenches, sides of foundations & basement from approved quarry consolidating deposited layer by watering and ramming, including all operational, incidental, labour charges, complete including cost and conveyance of sand / gravel for finished item of work. (APSS No 309 & 310).
600
-
215999
Uppada;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for FOUNDATIONS, PLINTH, PEDESTALS, STEPS Design Mix : M 25(Weigh Batch) Centering with Steel upto 3.66
-
-
-
Uppada;FOOTING
134
-
1206536
Uppada;Pedestals
23.25
-
220945
Uppada;PLINTH BEAMS
30.7
-
349671
Uppada;PCC - STEPS GF
4.62
-
32097
Uppada;Supply and placing of the M-25 Grade Vibrated reinforced Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS for:-Design Mix : M 25(Weigh Batch)
-
-
-
Uppada;COLUMN BELOW GROUND LEVEL 3.66
9
-
97437
Uppada;COLUMN GROUND FLOOR 4.27 M
27.22
-
305621
Uppada;COLUMN FIRST FLOOR 4.27 M HEIGHT
27.22
-
321380
Uppada;COLUMNS FLOOR TERRACE 4.27 M
4
-
49557
Uppada;LINTELS 3.66 M
-
-
-
Uppada;GROUND FLOOR
4.73
-
51443
Uppada;FIRST FLOOR
4.73
-
53733
Uppada;TERRACE
1
-
11837
Uppada;RCC WALL 300 mm thick
-
-
-
Uppada;GROUND FLOOR
48
-
134364
Uppada;First floor
37
-
118030
Uppada;WATER TANK TERRACE FLOOR SF
30
-
107423
Uppada;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 using Batching Plant at 20 Cum per hour,Transit mixer 4Cum capacity and concrete Pump with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete including HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete for finished item of work. for RCC SLABS, BEAMS
-
-
-
Uppada;Roof Beam ground floor 4.27 M Height
36
-
364328
Uppada;Roof Beam first floor 4.27 M Height
37.65
-
395803
Uppada;Head room TERRACE floor for staircases 3.66M height
17.22
-
187753
Uppada;Ground floor roof slab 150 MM THICK 4.27 M HEIGHT
480
-
662874
Uppada;First floor roof slab 150 MM THICK 4.27 M HEIGHT
480
-
763132
Uppada;TERRACE floor roof slab 100 mm THICK
70
-
99327
Uppada;Waist slab 175 MM THICK
-
-
-
Uppada;Ground floor
46
-
68137
Uppada;First floor
46
-
77580
Uppada;Supply and placing of the M-25 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete including Adjustable Jack screw Props and Acro span HIRE CHARGES FOR CENTERING & SCAFFOLDING but excluding cost of steel and its fabrication charges for finished item of work (APSS No 402) with minimum cement content as per IS code including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.for:-Sun Shade-Slab thk 62.50
-
-
-
Uppada;SUNSHADES GROUND FLOOR
22.82
-
18226
Uppada;SUNSHADES FIRST FLOOR
22.82
-
22963
Uppada;SUNSHADES TERRACE FLOOR
2.4
-
2910
Uppada;Supplying, fitting and placing HYSD (Fe 500/ tmt grade as per IS 1786-1985) bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including cost and conveyance of bars from approved sources to site of work, binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes, on cost of all materials complete for finished item of work
-
-
-
Uppada;HYSD - GROUND FLOOR
39.5
-
2978054
Uppada;HYSD - FIRST FLOOR
18.5
-
1408027
Uppada;HYSD -TERRACE FLOOR
4.7
-
361079
Uppada;Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No 501 & 504).
-
-
-
Uppada;GROUND FLOOR
88
-
575608
Uppada;FIRST FLOOR A & E BLOCK
66.4
-
470021
Uppada;TERRACE FLOOR HEAD ROOM
47.47
-
347831
Uppada;Reinforced Brick Masonry for partition walls (11.0 cm thick) in CM (1:4) prop. (Cement : Screened sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 Nos. of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental charges such as labour charges for mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., and overheads & contractors profit but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No of 501 & 509)
-
-
-
Uppada;GROUND FLOOR
440
-
350714
Uppada;FIRST FLOOR
284.32
-
263942
Uppada;Plain Cement Concrete (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size nominal aggregate machine crushed hard granite metal (coarse aggregate) from approved quarry from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all materials and including all charges for mixing, laying concrete, curing etc., complete for finished item of work. (APSS No 402) for:-Hand Mix-PCC (1:3:6) NOMINAL MIX
-
-
-
Uppada;GROUND FLOOR
0.4
-
1994
Uppada;Plastering 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for External & Uneven Surfaces of Brick Wall and RCC exposed surfaces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 20 mm
-
-
-
Uppada;GROUND FLOOR
770
-
313191
Uppada;TERRACE FLOOR
220
-
108036
Uppada;Plastering 12 mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for Internal & Even faces of Brick Wall and RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Plastering 2/c in CM (1:4) & (1:6): 12 mm
-
-
-
Uppada;GROUND FLOOR
790
-
306965
Uppada;TERRACE FLOOR
220
-
104037
Uppada;Ornamental plastering to ceiling 12 mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for RCC exposed faces for finished item of work. (SS 901,903 & 904) for:-Ceiling Plastering 2/c in CM (1:3) & (1:5): 12 mm
-
-
-
Uppada;GROUND FLOOR
550
-
216209
Uppada;FIRST FLOOR
548.82
-
246937
Uppada;FLOOR (TERRACE)
72
-
35473
Uppada;Providing impervious coat to exposed RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like sand, water proofing compound, water etc., to site, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including providing 4" coving with cement concrete in (1:2:4) prop. rounding off the wall and slab junction etc., complete for finished item of work. (APSS No 901 & 903) for:-Impervious coat CM(1:3), 20mm
-
-
-
Uppada;GROUND FLOOR
166
-
71668
Uppada;Flooring with Vitrified tiles of size 600 x 600 mm not less than 8 to 10mm thick normal colour 1st quality set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with 3mm Nylon spacers at each corner of the tile andn joints grooted with laticrete epoxy grout of pigment of approved shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed)cost of on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No707 & 701)
-
-
-
Uppada;GROUND FLOOR
383
-
455162
Uppada;Skirting with Vitrified tiles of size 600 x 600 mm not less than 8 to 10mm thick normal colour 1st quality thick internal wall to 12.5cm height with length equal to flooring stones and matching the flooring joint lines and set over a base coat of CM (1:5) prop. 12mm thick and filling the joints with laticrete epoxy grout of approved shade pigment match the lines of tiles slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed)cost of on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No707 & 701)
-
-
-
Uppada;GROUND FLOOR
35
-
41197
Uppada;Flooring with non-skid ceramic tiles of size 300 x 300 mm 8 to 10 mm thick set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed)cost of on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No707 & 701)
-
-
-
Uppada;GROUND FLOOR
37
-
32579
Uppada;FIRST FLOOR
36.96
-
33953
Uppada;Dadooing to walls with Glazed coloured Tiles of any size Ist Quality as approved by Engineer, 8 to 10 mm thick, shade and make set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per Sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand, water, tiles, coloured cement etc., to site, cost of on materials and all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.
-
-
-
Uppada;GROUND FLOOR
192
-
153571
Uppada;Flooring with Granite Floor tiles of size 600 x 300 mm 10 to12 mm thick of premium quality set over a base coat of CM (1:6) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed)cost of on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No707 & 701)
-
-
-
Uppada;GROUND FLOOR
165
-
229457
Uppada;Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) other than black and regular colours set over a base coat of CM (1:8) prop. 12mm thick and filling the joints with white cement mixed with pigment of matching shade to match the shade of granite over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand, water, granite slabs, white cement etc., to site (excluding cost of C.C. bed)cost of on all materials cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete for finished item of work. (APSS No707 & 701)
-
-
-
Uppada;GROUND FLOOR
10
-
36152
Uppada;S&F with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) other than black and regular colours in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per Sqm including cost and conveyance of all materials like cement sand, water flooring stones etc. to site cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges etc. complete for finished item of work for Risers and Treads of stair cases (APSS No701 & 707) Risers of 0.15m height
-
-
-
Uppada;Risers of 0.15m height
-
-
-
Uppada;GROUND FLOOR
9.72
-
36620
Uppada;S&F with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) other than black and regular colours in single piece with edges Rounded and set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per Sqm including cost and conveyance of all materials like cement sand, water flooring stones etc. to sitecost of cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges etc. complete for finished item of work for Treads & Window Sills & platform tops in the floor (APSS No701 & 707) Treads of 0.3 m height
-
-
-
Uppada;Treads of 0.3 m height
-
-
-
Uppada;GROUND FLOOR
20
-
87234
Uppada;Supplying and fixing stainless steel hand railing, balustrade etc using 304 or 202 grade stainless steel pipes of 50 mm dia nominal bore for hand railing at 3'0" high from ground level and 40 mm dia nominal bore for vertical supports placed at 5'0" c/c and two numbers 25 mm dia nominal bore for horizontal pipes placed below hand railing pipe as per the approved drawing including cost and conveyance of all materials buffing charges polishing charges etc complete for finished item of work. (50mm dia @4.57kg/Rmt, 40mm dia @3.61kg/Rmt and 25mm dia @2.46kg/Rmt
-
-
-
Uppada;GROUND FLOOR
30
-
177006
Uppada;Supply and fixing Teak Wood framed FLUSH Doors double shutter door with flush shutter as per approved drawings with best quality 2nd class teakwood frame of size 115x65mm and flush door shutters of 35 mm thick solid bond wood block board type with both side commercial ply (BSC) teak wood internal lipping as per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost of Brass fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm, 1 No tower bolt of 250x10mm dia, 1 No Aldrops - 300 mm long and 1 No fancy handles of 150 mm size & 1 No 63 mm long door stopper to each shutter including fixing the fixtures to door with required Noof screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002
18.96
-
126592
Uppada;Supply and fixing Teak Wood framed FLUSH Doors single shuter door with flush shutter as per approved drawings with best quality 2nd class teakwood frame of size 115x65mm and flush door shutters of 30 mm thick solid bond wood block board type with teak veneer on one face and commercial ply on another face (One side Teak) teak wood internal lipping as per drawing including fixing of 6 Nos. MS Z hold fasts of size 300 x 40 x 5mm size including cost of Powder Coated/ Chromium Plated Mild Steel fixtures of 3 Nos. butt hinges 150 x 31.75 x 3.5 mm, 2 No tower bolt of 250x12mm dia, 1 No CP Aldrops - 300 mm long and 2 Nos. CP handles of 150 mm size & 1 No 63 mm long door stopper including fixing the fixtures to door with required Noof brass screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002
99.75
-
679408
Uppada;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows two track sliding duly manufactured using UPVC reinforced profiles of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.0 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No, per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item
124.8
-
1142556
Uppada;Ventilators: Fixed louvers 2'-0" x 2'-0" (609.6x609.6mm)(Box section) outer frame section size of 33 x 57 mm
12.96
-
85844
Uppada;Providing Mild Steel, Structural Steel, I.e., Angles, Channels and I sections.of different diameters, cutting and fabricating to required sizes and shapes,placing in position as per approved designs and drawings to be supplied at the time of execution of work, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welede joints, etc., and all operational, incidental, Labour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, including cost of Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position etc. complete for finished item of work.
3000
-
293212
Uppada;Supplying and finishing (Two coats of HI-BOND Wall Putty Super Fine (Water Resistant) or Equivalent) to interior faces of new walls and ceiling of approved colour as per manufacturers specification including cost and conveyance of materials to site and labour charges such as preparing the wall, applying primary coat etc, complete including of Painting with Acrylic emulsion paint of dulux supreme 3 in a or equivalent brand to interior faces of new walls and ceiling with two coats of approved make, shade and colour over a base coat of primer approved make including cost and conveyance of materials like Acrylic emulsion etc., to site and labour charges such as preparing the wall, applying primary coat, applying two coats of Acrylic emulsion etc., sales and other taxes on cost of all materials, complete for finished item of work in all floors as directed by Engineer-in-charge.
1649
-
413899
Uppada;Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats
1012
-
190256
Uppada;Painting to new wood works with 2 coats of approved synthetic enamel paint of approved brand and shade over 1 coat of wood primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to wood work - Synthetic enamel paint to New Wood Work - 2 coats + 1 coat wood primer Cellar
71.55
-
11161
Uppada;Painting to new iron works with 2 coats of synthetic enamel paint of approved brand and shade over 1 coat of red oxide primer of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats + 1 coat Iron primer
38.4
-
5530
Uppada;Supply of Paving tiles high strength Cement Concrete interlocking Designer Pavers of 60 mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour pigmentation with imported colours and white cement to get required reflective glazing inclusive of all taxes and set over a base coat of Sand bed 12mm thick including cost and conveyance of all materials like sand, water, tiles, etc., to site, cost of on materials and all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work PHOENIX or Equivalent as directed by Engineer-in-charge.
111.97
-
61919
Uppada;Designing, providing and fixing Top Hung shutters in Structural Glazing fabricated from Roll formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ?D? quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72 mm and the glass holding section made of 304 grade stainless steel of 0.6 mm thick, duly providing stiffeners inside the colour coated steel/powder coated sections as per the design requirement, calculations to suit wind pressures as given in IS 875 and primer coat with epoxy primer of 5-7 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick and the outer frame of 20 mm x 58 mm x 0.6 mm, shutter sections of 58 mm x 33 mm x 0.72 mm, stiffener sections of 56 mm x 31 mm x 1mm, hinges ? 2 Nos for each shutter and aluminium Stays ? 2 Nos. for each shutter, aluminium Handle ? 1 No for each shutter including cost and conveyance of all materials to site, all labour charges, incidental charges, cost of all consumables etc. and scaffolding charges, form work etc. complete for finished item of work
18
-
109512
Uppada;Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for external walls - including cost of access scaffolding for:-External Colouring - Providing Putty/ Texture to External walls
61.71
-
26413
Uppada;Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat complete for finished item of work as per Idia Gypsum Ltd specification.
36.18
-
34550
Uppada;WATER SUPPLY SANITARY ITEMS
-
-
-
Uppada;Supply, Installation and commissioning approved make floor mounted EWC (suit) CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour
5
-
49175
Uppada;Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm duly providing constructing Brick masonry seat and CC Squatting plate including cost and conveyance of all materials and labour charges etc complete as per standard practice for finished item of work
5
-
11425
Uppada;Supplying and fixing of PVC Low Level System Parry ware/ slim line with complete internal components, short bend 10 Litres capacity Single Flush & 15 mm PVC Nylon connection with checknuts and 15 mm Angular CP Stop cock
5
-
10405
Uppada;Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make (HSW/Parry/Neycer) : 410 x 265 x 305 mm
5
-
14195
Uppada;S & F 38.1 mm C.P waste coupling Half or Full Thread 1st Quality Indian make Parryware or equivalent
5
-
1220
Uppada;Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality
5
-
130
Uppada;Supplying & fixing 4 " x 24 " (101.6x609.6mm) white glazed porcelain channel fixed in brick masonry white cement pointing
5
-
2030
Uppada;Supplying & Fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: including cost of 50mm dia pvc pipe, 12.7 mm PVC connection with brass union nut C.P coated and concealed stop cock 12.7 mm (1/2") etc compete for 550 x 400 mm - Single C.P. Pillar cock
5
-
13620
Uppada;Supplying and Fixing Pedestal for Wash Hand Basin (H.S.W / Parry / Earthenware) including Labour charges only for fixing pedestal for wash hand basin
5
-
6455
Uppada;Supplying & fixing of 1st quality 3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe fittings (Prince/Sudhakar or any ISI Brand)
17
-
1717
Uppada;INTERNAL DRAINAGE PIPE LINE
-
-
-
Uppada;Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No 1302 1319 & 1326) For 75mm dia
42
-
8184
Uppada;Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No 1302 1319 & 1326) For 110mm dia
179.44
-
51715
Uppada;EXTERNAL SANITARY/DRAINAGE ARRANGEMENTS
-
-
-
Uppada;Supplying and fixing 152.40 mm (6") x 101.60 mm (4") SWG gully trap of 1st class traps of ISI make conforming to IS: 651 & IS: 4127with C.I. grating and constructing single brick masonry wall chamber of size 20" x 14" x 12" in CM (1:6) pro. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost & conveyance to site, labour charges, etc. complete for finished item of work. (APSS No 1326)
16
-
9232
Uppada;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
10
-
67830
Uppada;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.
6
-
64044
Uppada;Cutting holes in stone masonry & basement and repairs Labour charges only for drainage pipe lines
3
-
258
Uppada;Cutting holes in Brick masonry & repairs Labour charges only for water supply pipelines
3
-
171
Uppada;Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 914.4mm (3'.0") depth and refilling watering and tamping etc complete for finished item of work 101.4 mm (4") dia
100
-
44800
Uppada;INTERNAL WATER SUPPLY FITTINGS & FIXTURES
-
-
-
Uppada;Supply and fixing tested Chromium plated Short Body Bib Cock of fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent approved make chromium plated 400 grams with CP Wall flanges complete for all floors, including cost & conveyance of all materials, labour charges, etc. complete for finished item of work as directed by Engineer-in-charge.
11
-
6875
Uppada;Supply & fixing towel rod (CP) of 24" long and 3/4 " dia
10
-
4060
Uppada;Supplying and fixing Glass frameless mirror and plywood back with CP screws of size 609.6 mm x 457 .2 mm (24" x 18") Indian make best quality glass mirror with approved make 1st quality including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
11
-
5929
Uppada;S & F angle stop cock 12.7 mm dia first quality Indian Make heavy duty Seiko/ Senior/ Nice or equivalent
11
-
5346
Uppada;INTERNAL WATER SUPPLY PIPE LINE
-
-
-
Uppada;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
-
-
-
Uppada;22.20mm OD pipe BMW-I.227/821
29
-
3190
Uppada;28.60mm OD pipe BMW-I.228/822
20
-
3440
Uppada;34.90mm OD pipe
92
-
25116
Uppada;41.30mm OD pipe
119
-
44506
Uppada;Supplying & fixing tested gun metal peet valve of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. 25 mm Nominal Bore
9
-
11259
Uppada;Supplying & fixing tested gun metal peet valve of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. 32 mm Nominal Bore
5
-
9495
Uppada;Supplying & fixing tested gun metal peet valve of 1st quality make with ISI mark screw type as approved by the Engineer including cost & conveyance of all materials, labour charges, etc. complete for finished item of work in all floors as directed by Engineer-in-charge. 40 mm Nominal Bore
1
-
2565
Uppada;Supply & fixing of Sintex /Aqua tech or equivalent Polyethylene water storage tank double layer confirming to ISI 12701/96 mark with lid.
10000
-
70000
Uppada;Providing 110 mm Dia ISI marked PVC (Sudhakar / Nandhini) down water take pipes with socket , 2.5mm thick 2.5kg/sq.cm pressure of ISI marked including cost of necessary PVC Bends, shoes, PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., complete for finished item of work. (APSS No 1328)
36
-
13104
Uppada;Septic tank
-
-
-
Uppada;Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
96
-
11391
Uppada;P.C.C. (1:4:8) using 40mm nominal size SS5 gauge hard broken Granite metal as per SS 108, machine mixed laid in position in layers not exceeding 15cm in thickness, including cost, seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as mixing concrete, laying, tamping, curing, etc. complete for finished item of work as per SS 402 for foundations.
3.2
-
13904
Uppada;Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No126)
3.13
-
235615
Uppada;Supply and placing of the M25 Grade corresponding to IS 456 using with 6mm to 20 mm size graded machine crushed hard granite metal ( Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales and other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curring etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.
-
-
-
Uppada;Raft
6.4
-
57626
Uppada;Supply and placing of the M25 Grade corresponding to IS 456 using with 6mm to 20 mm size graded machine crushed hard granite metal ( Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales and other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curring etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.
-
-
-
Uppada;Rcc walls 200mm thick
82.8
-
231778
Uppada;Slab 125mm thick
32
-
44192
Uppada;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No 901 & 903).
153.64
-
66332
Uppada;Supplying & fixing 50.8cm dia C.I.Manhole frame & cover for 91 4.4 mm dia chamber (20 Kgs- Lightweight)
2
-
2670
Uppada;SUMP
-
-
-
Uppada;Earth work excavation for foundations (Manual Means) of buildings, septic tank, sump, compound wall in ordinary soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc., as per SS 20 B(APSS 308)
36
-
4272
Uppada;P.C.C. (1:4:8) using 40mm nominal size SS5 gauge hard broken Granite metal as per SS 108, machine mixed laid in position in layers not exceeding 15cm in thickness, including cost, seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as mixing concrete, laying, tamping, curing, etc. complete for finished item of work as per SS 402 for foundations.
1.2
-
5214
Uppada;Providing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No126)
1.23
-
92734
Uppada;Supply and placing of the M25 Grade corresponding to IS 456 using with 6mm to 20 mm size graded machine crushed hard granite metal ( Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales and other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curring etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.
-
-
-
Uppada;Raft
2.4
-
21610
Uppada;Supply and placing of the M25 Grade corresponding to IS 456 using with 6mm to 20 mm size graded machine crushed hard granite metal ( Coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales and other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curring etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work.
-
-
-
Uppada;Rcc walls 200mm thick
42
-
117568
Uppada;Slab 125mm thick
12
-
16572
Uppada;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No 901 & 903).
61.8
-
26681
Uppada;Supplying & fixing 50.8cm dia C.I.Manhole frame & cover for 91 4.4 mm dia chamber (20 Kgs- Lightweight)
2
-
2670
Uppada;Bore well
-
-
-
Uppada;Drilling of borewell by rig to a finished dia of 150 mm(which may be carried out by pilot bore to a suitable diameter and reaming to required dia) in all formations for rotary drilling such as alluvial soils sand stone formation etc., including installations of 125mm dia PVC blue casing pipe conducting yield test including charges of consumables and all other charges required in fixation of pipe assembling etc., but excluding cost of 150mm blue caseing pipe etc.,incl cost drilling charges etc., complete.
60
-
31800
Uppada;Cost and supply of 125mm dia PVC(ISI) Blue casing pipe including manufacturing supply and delivery and all taxes and conveyance charges etc., complete to work spot.
60
-
54000
Uppada;Labour charges for slotting 125mm dia PVC casing pipe
60
-
18000
Uppada;Cost OF Bore Cover including manufacturing supply and delivery and all taxes and conveyance charges etc., complete to work spot.
1
-
600
Uppada;Cost and supply of clamp set including manufacturing supply and delivery and all taxes and conveyance charges etc., complete to work spot.
1
-
1000
Uppada;Supply and Transportation of 1.50HP 15 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Kirloskar / Crompton / CRI / L&T / Texmo / Varsha. ELEC - 5.4.11
1
-
30000
Uppada;Manufacture, supply, & delivery of 50mm outer dia HDPE pipes conforming to IS 4984 - 1995 at 6Kg/Sqcm. including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc.,Laying jointing of HDPE pipes as per BIS No 7634 part -II/75 and specials /fittings including excavation of trenches up to 0.5 mts depth in all soils except rock requires blasting and refilling trenches after laying and jointing of pipes as per ssr item No12 (b) complete for finished item of work for All Floors.
65
-
9230
Uppada;Supply of PVC insulated 2 core 2.5 Sqmm sheathed flexible copper cable for voltage up to 1100V as per IS 694/1991 of makes Finolex / RR Kable / KEI. For 1.5 HP Monoblock motor
130
-
9880
Uppada;ELECTRICAL
-
-
-
Uppada;Supply and Fixing of 25mm dia 2mm thick P.V.C. pipe of makes Sudhakar / Maco Plast / Avon Plast / Modi (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.
1250
-
67525
Uppada;Supply and Fixing of 32mm dia 2.5mm thick P.V.C. pipe of makes Sudhakar / Maco Plast / Avon Plast / Modi (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.
640
-
42483
Uppada;Supply and Fixing of 25mm dia 1.5mm thick P.V.C. pipe of makes Sudhakar / Maco Plast / Avon Plast / Modi (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete
1900
-
252700
Uppada;Supply and Fixing of 32mm dia 2.5mm thick P.V.C. pipe of makes Sudhakar / Maco Plast / Avon Plast / Modi (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete.
850
-
125800
Uppada;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR/FRLS) P.V.C. insulated flexible copper cable of makes Finolex / L&T (ISI MARK) in existing pipe with 6A 1 Way flush type Swich, Ceiling rose of makes Anchor / Gold Medal Olive / Million Zoom / Vimal opel / Maru Montero / Sunlight Power and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings
600
-
360000
Uppada;Supply and Run of 1 of 36/0.3mm (2.5 Sq.mm) FR / FRLS P.V.C. insulated flexible ISI mark copper cable of Finolex / L&T make in existing pipe for earth continuity inlcuding all labour charges etc., complete.
750
-
36750
Uppada;Supply and Run of 2 of 56/0.3mm (4.0 Sq.mm) FR / FRLS P.V.C. insulated flexible ISI mark copper cable of Finolex / L&T make in existing pipe for run of mains inlcuding all labour charges etc., complete.
650
-
66950
Uppada;Supply and Run of 2 of 84/0.3mm (6.0 Sq.mm) FR / FRLS P.V.C. insulated flexible ISI mark copper cable of Finolex / L&T make in existing pipe for run of mains inlcuding all labour charges etc., complete.
640
-
92160
Uppada;Supply and Run of 2 of 140 /0.3mm (10 Sq.mm) FR / FRLS P.V.C. insulated flexible ISI mark copper cable of Finolex / L&T make in existing pipe for run of mains inlcuding all labour charges etc., complete.
355
-
72775
Uppada;Supply of 12 Modular Vertical Cover Frame of Legrand Arteor / MK Blenge / Schneider Zen celo
36
-
7524
Uppada;Supply of 8 Modular Horizontal / Vertical Cover Frame of Legrand Arteor / MK Blenge / Schneider Zen celo
48
-
8208
Uppada;Supply of 3 Modular Cover Frame of Legrand Arteor / MK Blenge / Schneider Zen celo
42
-
2772
Uppada;Supply of 16A / 20A 1 Way Modular Switch of Cabtree Thames Platinum / GM / Million / Anchor Roma viola / Toyoma / L&T / Fortune Art / CPL.
190
-
24130
Uppada;Supply of 20A Modular Socket with shutter of Cabtree Thames Platinum / GM / Million / Anchor Roma viola / Toyoma / L&T / Fortune Art / CPL.
170
-
23460
Uppada;Supply of 6A / 10A 1 Way Modular Switch of Cabtree Thames Platinum / GM / Million / Anchor Roma viola / Toyoma / L&T / Fortune Art / CPL.
260
-
21580
Uppada;Supply of 6A / 10A 3/2 Pin Modular Socket with shutter of Cabtree Thames Platinum / GM / Million / Anchor Roma viola / Toyoma / L&T / Fortune Art / CPL
200
-
18800
Uppada;Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.
165
-
51645
Uppada;Supply and fixing of ding dong bell on 100 x 178 mm (4"x7") decolam block including giving connections cost of all accessories and all labour charges etc., complete.
42
-
10416
Uppada;Supply and fixing of 4 way TPN DB with IP-43 Protection with 1 No 40A FP Isolator and 12Nos 6-32 A 10kA SP MCBs of Legrand / L&T Hager / GE / Siemens / Schneider make including internal connections and labour charges for Surface Mounting etc., complete. 40A FP Isolator/ RCCB / ELCB - 1 No for incomer, 10kA-6-32A SP MCBs - 12Nos for outgoing.
18
-
136692
Uppada;Supply and fixing of 8 way TPN DB with IP-43 Protection with 1 No 80A FP Isolator and 18Nos 6-32 A 10kA SP MCBs of Legrand / L&T Hager / GE / Siemens / Schneider make including internal connections and labour charges for Surface Mounting etc., complete. 80A FP Isolator - 1 No for incomer, 10kA- 6-32A SP MCBs - 18Nos for outgoing.
8
-
86760
Uppada;Supply and fixing 8 way TPN - Vertical type Distribution board with IP -42 Protection (Metal Door) with 100A, 4Pole 25 kA MCCB as incomer with 4Nos 32A TP MCBs and 12 Nos. 10 kA SPMCBs as outgoing including internal connection and labour charges for surface / flush mounting etc., complete
8
-
131920
Uppada;Supply, Transportation and fixing of 1x28W surface pendent mounting (T5) luminaire plastic housing with integrated reflector extruded alluminium luminaire with Electronic Ballasts Including 1Nos 4'-28W tube Including fixing on wall / ceiling on TW round blocks and all standrad accessories of makes Crompton / Bajaj / Surya / Havells.
24
-
25752
Uppada;Supply, Transportation and fixing of 1x36/40W Patty type tube light luminaire with powder coated CRCA sheet steel housing with Copper Ballast Including 1No 4' - 40W tube fixing on wall / ceiling on TW round blocks and all standrad accessories of makes Crompton / Bajaj / Surya / Havells.
92
-
40572
Uppada;Supply, Transportation and Fixing of 1200mm (48") Sweep Crompton High Speed / Bajaj Ultima / Havells Velocity / Usha Ashtra / Orient Summer Pride make AC Ceiling fan with all standard accessories but without regulator including all labour charges etc., complete
90
-
214740
Uppada;Supply & Fixing of 400W Modular type Stepped electronic regulator of makes Mossaic / L&T / North West / MK / Salzer.
90
-
40590
Uppada;Supply, Transportation and Fixing of 12"(300mm) 250V light duty ISI mark of Crompton / Bajaj / Havells / Orint Make exhaust / Fresh Air fan with metallic body and blades including making hole in wall and masonary work and all labour charges etc., complete.
29
-
64844
Uppada;Supply of 2 Pair telephone copper wire of makes Gold Medal / Million / Finolex / Delton / Surabi / Polycab / Nakoda.
122
-
3416
Uppada;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
2
-
19916
Uppada;Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete.
116
-
12528
Uppada;Supply, Transportation and Fixing of 16" (400mm) Wall mounted Fan of makes Crompton SDX Gold / Bajaj Elite / Havells Swing Premia gold / Usha / Orient Wall 43. and all labour charges etc., complete.
18
-
49662
Uppada;Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 0.3mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).
3
-
44562
Uppada;Supply and erection of Panel mounting cubical type 60 / 63A TPN 415V, 50 Hz. switch disconnector fuse of makes L&T / G E / C&S / ABB / SIEMENS unit complete with front drive mechanism with door inter lock, padlocking arrangement etc., complete with fuse links on existing control panel.
16
-
44816
Uppada;Supply and erection of Panel mounting cubical type 630A TPN 415V, 50 Hz. switch disconnector fuse of makes L&T / G E / C&S / ABB / SIEMENS unit complete with front drive mechanism with door inter lock, padlocking arrangement etc., complete with fuse links on existing control panel.
18
-
441720
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements