Andhra Pradesh State Seeds Development Corporation Limited Tender

Renovation additional facilities;Supply and placing of the VRCC M-20 Grade Design Mix Concrete corresponding to IS 456 using Batching Plant with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-14)including contractors profit and over head charges but excluding GST and Seigniorage charges FOR LINTELS

Renovation additional facilities;Providing High Yield Strength Deformed (HYSD/) Thermo Mechanically Treated (TMT) Mild Steel (MS) steel bars Fe- 500 D grade as per IS 1786 of different diameters for RCC works, including labour charges for staightening ,cutting,bending to required size and shape s, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG ,forming grills for reinforcement work as per approved designs and drawings,including cost and conveyance of steel bars, including all wastages such as verlaps ,couplings,chairs,spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting ,bending,placing in Postion, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.(Apssno.126)

Renovation additional facilities;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including cost and conveyance of all materials, and all operational, incidental charges on materials and including all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., complete for finished item of work. (SS 901,903 & 904)

Renovation additional facilities;Painting to new walls with 2 coats of Plastic emulsion paint of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls

Renovation additional facilities;Providing and fixing COMPOSITE SLIDING WINDOW fabricated from roll formed sections made of Galvanized Steel colour Coated/Powder Coated (Base Steel as per IS 513 ?D? quality, Galvanized as per IS 277 with Zinc of 120 grams /Sq.Mtr.) with total coated thickness of 0.58 mm, powder coated with pure Polyester Powder up to 50-60 microns thick and the section for external frame bottom of 68 x 25mm (Aluminium), External frame sides & Top of 68 x 25 mm (Aluminium), section for shutter of 59 x 23mm and Lap Strip of 30 x 7.5mm (uPVC) cut to length and mitre joined with L-bracket and 5 mm plain float Galss with Ethyl Propylene Diamine Monomer (EPDM) gasket, the corner bracket for external frame made of Aluminium ?L?-Angle, Corner Bracket for internal frame made of Polyproylene, Crescent Latch, Rollers, & EPDM Gaskets for shutters, wool pile for lap strip, Bump Stop Base & Rubber for shutter stopper including fixing to brick/concrete masonry using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames and fixing 10mm square guard bars with 6? pitch centre to centre (152.4mm) completed for finished item of work .

Renovation additional facilities;Painting with Synthetic Enamel paints - 2 Coats - For Wood Work.

Renovation additional facilities;Flooring with Non-skid Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, .

Renovation additional facilities;Providing dadooing to internal walls with glazed ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges, etc., complete for finished item of work

Renovation additional facilities;Flush door for toilet: supply and fixing of 35 mm thick flush door shutter, solid bond wood block board type with commercial ply on both faces to the existing door frame with 4 nos. of 125 mm butt hinges, 2 nos. 125 mm long door handles, 1 no. aldrop of size 250 mm long, 2 nos. of 200 mm long tower bolts, including providing kick plate with 24 guage aluminium sheet up to 230 mm height on front face & full height on rear face including bottom edge of the shutter with bolts, nuts, nf screws including cost and conveyance of all materials to site, labour charges for making the frame and shutter and fixing etc., including minor extra fixtures required if any as directed by the engineer-in-chrge of the work complete for finished item of work. (all fittings and fixtures should be of alluminum, isi mark, got approved by the engineer-in-charge) (apssno:1001&1002) .

Renovation additional facilities;Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft paper used to give the required rigidity and effective acoustic insulation with 6? Tower bolt ? 2 Nos., 6? D handles ? 2 Nos., 10? Aldrop ? 1 No., Butt Hinges ? 6 Nos, Mortise Lock of approved quality ? 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Double leaf Door

Renovation additional facilities;Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch complete for finished item of work.

Renovation additional facilities;SANITARY ARRANGEMENTS 12.7mm Angle Stop Cock - 400 Grams

Renovation additional facilities;12.7mm NP Bib Tap - 400 Grams

Renovation additional facilities;12.7mm CP Long body bib cock - 400 grams

Renovation additional facilities;S&F CPVC Pipes-22.20 MM O.D - SDR 13.5

Renovation additional facilities;Boxing of Nahany Traps in RCC floors(BMW-C.43)

Renovation additional facilities;S & F NP soap dish heavy type with NP SCREWS

Renovation additional facilities;Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Single C.P. Pillar cock

Renovation additional facilities;Supply and fixing white glazed flat back half stall urinals of 1 st quality conforming to is2556-1995 with standard cp spreader of overall size 95x95x57 mm conforming to is 2556-part 6 ,sec-6-1974 fixed with screws completre indian make of size 590 x375 x390 mm including 12.70 mm pvc connection with brass union nuts c.p coated, 38.10 mm c.p waste coupling, 38.10 mm pvc solid waste pipe outlet, cost and conveyance of all materials to site, labour charges etc., complete.

Renovation additional facilities;Supply and fixing in position european type water closet of best indian make white glazed with 100 mm 'p' trap, plastic seat and lid for european water closet and buffers as per is 2548-1963 and providing pvc low level flushing system of 8 litres capacityof parryware slimline (white) with internal components and short bend, 12.70 mm pvc connection with brass union nuts c.p coated, including cutting the walls and floors and making good the same, cost and conveyance of all materials to site, labour charges etc., complete.