Andhra Pradesh Solar Power Corporation Private Limited Tender

Office Building;Constrcution of Brick Masonry in CM (1:6) with 2nd class Bricks in all floors including cost and conveyance of all matreials., labour charges, Curing, all leads and lifts etc., complete for finished item of work as directed by the Engineer-in-charge.

Office Building;Providing plastering with CM (1:5), 12 mm thick for INSIDE FACE OF WALLS in all floors of super structure in all heights including cost and conveyance of all materials, scaffolding, curing, labour charges, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Providing impervious coat to exposed RCC roof slab surfaces to required slopes in CM (1:3) 20 mm thick mixed with water proofing compound (Acco proof or equivalent) at 1 Kg per one bag of cement laid over slab when it is green rendered smooth with a floating coat of neat cement and thread lining at regular intervals of 45 X 45 cms including cost and conveyance of all materials, all labour charges, mixing mortar, finishing, rounding off junctions of wall and slab, all leads and lifts, curing etc., complete for finished item of work.

Office Building;Providing Ceiling plastering with CM (1:4), 12 mm thick for rooms other than covered under false ceiling in all heights including cost and conveyance of all materials, scaffolding, curing, labour charges, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Providing plastering in 20 mm thick in two coats: 1st coat in CM(1:6) 16 mm and 2nd coat CM (1:4) 4 mm thick for OUTSIDE FACE OF WALLS of super structure in all heights including cost and conveyance of all materials, scaffolding, curing, labour charges, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Providing and applying wall care putty of white cement or polymer or cement based, average 1 to 2 mm thickness in 2 coats over plastered surface for plastered walls to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials, labour etc. complete for finished item of work for Internal walls.

Office Building;Painting the internal walls with two coats of Plastic Emulsion paint of Grade I of approved make and shade over one coat of white cement primer water base interior grade-1 (Asian/Berger/Nerolac) including cost and conveyance of cement primer and all materials, incidental charges, all leads and lifts at all heights for all floors etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Painting the external walls with two coats of Exterior Emulsion paint of Grade I of approved make and shade over one coat of white cement primer water base exterior grade-1 (Asian/Berger/Nerolac) including cost and conveyance of cement primer and all materials, incidental charges, all leads and lifts at all heights for all floors etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Flooring with PORCELAIN VITRIFIED FLOOR TILES (Nano/stain free) of size 600 x 600 mm and thickness between 8 - 10 mm and normal colours of 1st quality of approved make and colour, set over base coat of cement mortar (1:8), 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work.

Office Building;Flooring in toilets with ceramic non skid tiles of first quality make as approved by Engineer-in-charge Non-skid red or white full body Ceramic floor tiles of size 400 x 400 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM(1:8) 20 mm thick over CC bed already laid including neat cement slurry of honey like consistency spread at the rate of 3.3Kgs per Sqm and filling the joints with white cement paste (but excluding basic cost of cement) cost and conveyance of sand, water, ceramic tiles, white cement etc., to work site, seignorage charges, cost of base coat, all labour charges for mixing of cement mortar laying tiles to required slope, curing,, all incidental charges and operational charges,all leads and lifts etc., complete for finsihed item of work.

Office Building;Dadoing to walls with first quality coloured glazed tiles of approved make and design as approved by Engineer in charge of glazed red or white full body ceramic wall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs in bath rooms, toilets and kitchen set over a base coat of CM (1:5) 12 mm thick and neat grey cement slurry of honey like consistency spread at the rate of 3.3 Kg/Sqm and jointed with white cement paste mixed with pigments of matching shade to match the shade of tiles including conveyance charges of cement (but excluding basic cost of cement) including cost and conveyance of all materials and water to work site, seigneorage charges, all labour charges for mixing of cement mortar, fixing in position, lift charges, curing, cutting the brick masonry and re-doing the same such that the top surface of the tiles is to be flushed with plastered surface, all incidental charges and operational charges all leads and lifts etc., complete for finished item of work.

Office Building;Supply and fixing of false ceiling using 12 mm thick plaster of paris boards with standard GI ceiling angles, Sections, perimeter channels including cost and conveyance of all materials and labour charges, leads & lifts, other incidental charges etc complete as directed by the engineer-in-charge.

Office Building;Supply and fixing of well seasoned best quality BALARSHA TEAK WOOD PANELED DOOR with 75x100 mm thick outer frame and 35 mm thick teak wood shutter including cost and conveyance of wood, painting the wood surface in contact with masonry with one coat of solignum paint, fixtures and fittings like MS hold fasts, brass butt hinges, brass tower bolts, brass mortice locks , brass door stoppers, rubber door bushes etc., as per the statement/requirement, labour charges, all leads and lifts etc. complete for finished item of work for single/double leaf door opening size of 1.06 M x 1.98 M.

Office Building;Supply and fixing of well seasoned BALARSHA TEAK WOOD FRAME and FLUSH DOORS of various sizes with 75x100 mm thick outer frame and 40 mm thick flush door shutters made up of solid bond wood block board type with teak ply on both faces conforming to IS:2202 of approved make including cost and conveyance of wood, painting the wood surface in contact with masonry with one coat of solignum paint, fixtures and fittings like MS hold fasts, Brass butt hinges, Brass tower bolts, Brass mortice locks, Brass fancy door handles, Brass door stoppers and rubber door bushes etc., as per the statement/requirement, labour charges, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge for single leaf door of size 0.91 M x 1.98 M.

Office Building;Supply and fixing of toilet door of size ( 2'6"x6'0") with 75x100 mm thick frame made up with well seasoned BALARSHA TEAK WOOD 40 mm thick flush door shutters made up of solid bond wood block board type with teak ply on both faces conforming to IS:2202 of approved make cladding with PVC on inner side side including cost and conveyance of wood, painting the wood surface in contact with masonry with one coat of solignum paint, fixtures and fittings like MS hold fasts, Brass butt hinges, Brass tower bolts, mortice lock or other approved locking facility, Brass fancy door handles, Brass door stoppers and rubber door bushes etc., as per the statement/requirement, labour charges, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge for double leaf door of size 0.76 M x 1.98 M.

Office Building;Supply & applying Poly-Urethane Water Proof Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, applying two component wood sealer, after the surface preparation applying one coat of approved spraying PU thinner (for spraying) and apply one coat of PU by spray, air-dry overnight, Sand again with 180 No. emery paper and removing dust, applying second coat of PU, air drying for 4 - 6 Hrs, Sand with 320 No emery paper, and applying (with spray) two coats of approved brand PU including cost & labour charges, emery papers, cost of thinner & PU of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., complete for finished item.

Office Building;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement windows openable shutters duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 2.0 mm for outer frames, 70 mm x 60 mm x 2.0 mm for mullion sections for two or more openable shutters/sliding shutters 70 mm x 60 mm x 2.0 mm for openable shutter frame capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant and accessories for casement window - friction stay hinges of stainless steel grade 304- 2 Nos., per sash, handle with mazak alloy casting 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work

Office Building;Providing stainless steel hand railing by running with styles made with 50 mm dia 304 grade of 900 mm long at 1 m interval, horizontal supports of 3 Nos 20 mm dia 304 grade pipes and hand railing with 50 mm stainless tubes including cost and conveyance of all materials, labour charges for fabrication and errection, welding with stainless steel welding rods including buffing, ornamental attachments for vertical posts at top, polishing to present seamless finish etc. for finished item of work as directed by the engineer in charge.

Office Building;Supply and erection of approved ISI make polyethylyne water storage tank of 1000 lts capacity double layer conforming to ISI 12701/96 with lid including cost and conveyance of all materials, all fixtures, all leads and lifts complete as per the directions of the Engineer in charge for the finished item of work.

Office Building;Supply and fixing of Ashirvad/Ajay/Astral Flowguard or equivalent CPVC pipes of 22.20 mm OD including cost and conveyance of CPVC pipes, specials like Tees, Elbows, unions etc, clamps, solvent cement, concealing in walls where ever required, incidental charges, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Supply and fixing of Ashirvad/Ajay/Astral Flowguard or equivalent CPVC pipes of 28.60 mm OD including cost and conveyance of CPVC pipes, specials like Tees, Elbows, unions etc, clamps, solvent cement, concealing in walls where ever required, incidental charges, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Supplying , laying, jointing and testing PVC 1st class pipes of 160 mm dia for main sewer lines with all necessary specials and fittings including cost and conveyance of all materials, caulking the joints air tight with jute and CM (1:2), curing at all heights of building, incidental charges, all leads and lifts, labour charges etc., complete for finished item of work and as directed by the Engineer in charge.

Office Building;Supplying , laying, jointing and testing PVC 1st class pipes of 110 mm dia for connecting WC and nahani traps to main sewer lines with all necessary specials and fittings including cost and conveyance of all materials, caulking the joints air tight with jute and CM(1:2), curing at all heights of building, incidental charges, all leads and lifts, labour charges etc., complete for finished item of work and as directed by the Engineer in charge.

Office Building;Supply and fixing of 150 mm and 100 mm SWG/PVC gully trap of ISI make with CI gratings and construction of brick masonry in CM 1:6 and fitted with 304.80mm X 288.60mm CI Frame and hinged cove. Curing, all leads and lifts, labour charges etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Supply and fixing 3"(76.2mm) dia C.I Nahany traps 1st quality with CI grating in toilets, dining hall and kitchen etc., including cost and conveyance of all materials, labour charges for fixing, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Supply and fixing of 12.7 mm dia N.P bib tap indian make of heavy duty of standard quality (ISI) with specials including cost and conveyance of taps, other accessories, labour charges for fixing, all leads and lifts etc., complete for finished item of work.

Office Building;Supplying & fixing SINGLE BOWL stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with all accessories, cost of pillar cock, labour charges for fixing including cost and conveyance of all materials, incidental charges etc complete for finished item of work.

Office Building;Supply and fixing approved make pedestal type wash basin 1st quality conforming to IS 2556-part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread confirming to IS:2963-1979, fitted with angular stop cock of jaguar make and fitted with 15 mm nominal bore CP pillar tap of Jaquar or equivalent make complete with standard CI brackets including wooden block: 630 x 450 mm - Single CP pillar cock with all accessories, labour charges for fixing including cost and conveyance of all materials, incidental charges, all leads and lifts etc., complete for finished item of work

Office Building;Providing and fixing of White glazed European style water closets of Hindustan/Neycer/Parry ISI standard make with ?S? trap including plastic seat and lid, Jaguar make angular stop cock, Jaquar make CP bib cock cum health faucet with 1 m long flexible tube, 10 lits capacity PVC low level single flush tank with all internal components & short bends, PVC pipe connector, cost and conveyance of all material, labour charges etc,. complete for finished item of work as directed by the Engineer-in-charge.

Office Building;Supply and fixing TV shape mirror with plastic frame of size 609.6mmX457.2mm including cost and conveyance of all materials, incidental charges, all leads and lifts etc., complete for finished item of work, as directed by the engineer in charge.

Office Building;Supplying and fixing of soap dish of ISI mark of standard size, rate including cost and conveyance all materials, all leads and lifts, all labour charges, all incidental charges, fixing charges etc. complete for finished item of work as directed by the Engineer-in-charge.

Office Building;Supply & Fixing of towel rail 24'' Jaquar make Continental series, Chrome finish with specials including cost and conveyance of towel rail, specials, labour charges for fixing, incidental charges,all leads and lifts etc., complete for finished item of work.

Office Building;Supply and fixing of 25 mm dia of GM gate valves life make ( ISI) mark including cost and conveyance of gate valve, labour charges for fixing, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Supply and fixing of 20 mm dia of GM gate valves life make ( ISI) mark including cost and conveyance of gate valve, labour charges for fixing, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Supply and fixing of 20 mm dia 1.55 mm thick PVC conduit pipes of ISI standard Sudhakar / finolex or approved equavalent quality for concealed electrification inside walls and roof slab with necessary GI wire to draw electric wires at a later date including cost and conveyance of pipes, junction boxes ,incidental charges,all leads and lifts, required accessories,including masonry work and labour charges etc., complete for finished item of work as directed by the engineer in charge.

Office Building;Supplying and fixing switches of apporved make including wiring with 2 runs of 22/0.3mm ( 1.5 Sqm) P.V.C. insulated F.R flexible copper cable (ISI MARK) in existing pipe with 6A/10A modular switch (Anchor, finolex, Legrand other approved make by engineer-in-charge), Ceiling rose including all labour charges, incidental charges, all leads and lifts, fixing of concealed metal box and modular cover frame etc., complete in all floors for light, bell, fan and exhaust fan points etc., in buildings for finished item of work including cost of metal box complete in all respects.

Office Building;Supplying and fixing 3/2 Pin sockets including wiring with 2 runs of 36/0.3 mm (2.5 Sqm) P.V.C. insulated F.R flexible copper cable ( Finolex, Legrand or other ISI MARK) in existing pipe with 6A Mini Modular switch control and 3/2 pin sockets fixing on modular switch board including all labour charges, incidental charges, all leads and lifts etc., complete in all floors for finished item of work

Office Building;Supply and laying of 2 of 56/0.3mm ( 4 Sqmm) F.R P.V.C insulated flexible copper cable of ISI standard PHINOLEX or equalent approved quality in the existing concealed PVC pipes for mains including all labour charges, ,incidental charges,all leads and lifts etc., complete for finished item of work.

Office Building;Supply and fixing of 20A modular socket along with 20 A modular switch (Anchor, Legrand or other approved make by engineer-in-charge) with indicator including earth connections and all labour charges, incidental charges,all leads and lifts etc., fixing of concealed metal box and modular cover frame etc.complete for finished item of work as directed by the engineer in charge.

Office Building;Supply, Transportion and fixing of 26 W LED tube light set of make / Wipro / Philips including all accessaries, all incidental charges, all leads and lifts etc., complete for finished item of work

Office Building;Supply, Transportation and fixing of 30W LED Down lighter, suitable for Recessed / Surface mounting made of diecast alluminium body with powder coating, acrylic diffuser with Driver, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high power LED's having efficacy of > 120 lumins / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., a) complete Makes:PHILIPS. b) LED MAKE : PHILIPS LUMILEDS (Model Num RC140 or equivalent) Complete as directed by Engineer In charge.

Office Building;Supply and fixing of batten holder/ slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges of ISI standard PHILIPS make including fixing charges, incidental charges,all leads and lifts etc., complete for finished item of work as directed by the engineer in charge.

Office Building;Supply and fixing of 1200 mm (48") sweep 230V, A.C 50 Hz.Celling fan with 3 Blades and double ball bearings with all standard accessories of ISI standard CROMPTON high speed /USHA Astra / BAJAJ Ultima make with necessary down rods of stem type including cost and conveyance of all materials, cost of electronic fan regulator, labour charges, incidental charges, all leads and lifts etc., complete for finished item of work as directed by the engineer in charge.

Office Building;Supply and fixing of 12" ( 300 mm ), ISI, 900 RPM heavy duty exhaust fans with metallic blades of approved make Crompton, Almounard / Havells turbo force including cost and conveyance of material, labour charges, incidental charges, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge.

Office Building;Supply and erection of Panel mounting cubical type 60 / 63A TPN 415V,50 HZ. Switch disconnector fuse unit complete of make L&T/GE/C & S with front drive mechanism with door inter lock, padlocking arrangement, all leads and lifts etc.,complete with HRC fuse links on existing control panel for finished item of work.