Andhra Pradesh Power Generation Corporation Limited Tender

Providing Brick masonry in CM(1:5) for superstructure on ground floor using second class traditional size bricks 23 x 11 x 7 cms including cost and conveyance of all materials, seigniorage charges,labour and all operations for constructing brick masonry, mixing cement mortar,curing etc., complete for finished item of work as directed by the Engineer-in-charge at site.

Plastering to the external walls with CM(1:4), 20 mm thick for the external faces of brick masonry walls,including neat finishig and sponging,cost and conveyance of cement and all materials, all labour charges ,curing all leads and lifts, scaffolding charges, other incidental charges,etc.,Complete for finished item of work as directed by the engineer-in-charge.

Flooring with non-skid fully vitrified floor tiles of 1st quality tiles of approved make (Johnson or equivalent),and size of 600x600mm and thickness between 8-10mm 1st quality of approved colour and finish in all shades and designs or any other size as specified by the Engineer in Charge, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including providing beading to the cladding wherever necessary, dismantling of existing damaged tiles/shahbada stone flooring, cost of all materials like cement, sand water and tiles etc., complete, including seignorage charges, etc., complete for finished item of work.

Painting the external walls with weather proof water based ACRILIC EMULSION PAINT EXTERIOR GRADE (APEX ULTIMA or Berger weather gaurd or equivalent ) in two Coats over existing wall surface in all heights including cost and conveyance of all materials, T&P,sealing of cracks on walls neatly with cement putty and painting the wall surface with one coat of cement primer at wherever necessary,all labour charges with all leads and lifts,scaffolding charges, cost of brushes,cement primer and paint,wall putty etc., complete as directed by the Engineer-in-charge for finished item of work.

Painting the internal wall surface with two coats of acrylic based oil bound washable distemper Asian or Berger make or approved make and shade in all heights including cost and conveyance of all materials, T&P,sealing of cracks on walls neatly with cement putty and painting the wall surface with one coat of cement primer at wherever necessary,all labour charges with all leads and lifts,scaffolding charges, cost of brushes,cement primer and paint,wall putty etc., complete as directed by the Engineer-in-charge for finished item of work.

Providing & Fixing of Galvanized powder coated Casement Windows with openable shutters duly manufactured using pressed steel sections in mild steel conforming to IS 513 of having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment with pure polyester powder coating of 30-40 microns thick and section for outer frame of 60x50mm, centre for mullion of 62x50mm, section for shutter of 52 x 22 mm, outer frame and mullions to have one side rebate for glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2 nos of stainless steel heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick powder coated aluminium 'U' channel and window frames fixing to the concrete/masonry wall arrangement with self expanding screws, complete for finished item of work - 1530 x 1372 or above size including cost and conveyance of all materials with all leads and lifts,labour charges for fixing etc.,complete for finished item of work as directed by the Engineer-in-charge for finished item of work.

Supplying,Jointing,Testing and fixing of 110 mm PVC pipes of Prince/Sudhakar/equivalent ISI make with pressure 6 Kg/Cm2 for connecting to sewerage , rain water , WC and Nahani traps to Man holes and main sewage tank and caulking the joints with Gum inclduing dismantling of old pipe including cost and conveyance of all materials like cost of pipes, 160mmx110mm UPVC Internal reducers,110mm PVC T-Joints,PVC bends etc, all leads and lifts, labour charges etc., complete as directed by the Engineer-in-charge for finished item of work.

Supply and Fixing of Premium or equivalent approved make CPVC Pipes of 54 mm OD pipe-SDR 13.5 and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007 including the cost and conveyance of all materials, all labour charges, all leads and lifts etc., complete as directed by the Engineer-in-charge for finished item of work.

Supply and Fixing of Premium or equivalent approved make CPVC Pipes of 28.60 mm OD pipe-SDR 13.5 and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007 including the cost and conveyance of all materials, all labour charges, all leads and lifts etc., complete as directed by the Engineer-in-charge for finished item of work.

Supply and Fixing of Premium or equivalent approved make CPVC Pipes of 15.90 mm OD pipe-SDR 13.5 and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007 including the cost and conveyance of all materials, all labour charges, all leads and lifts etc., complete as directed by the Engineer-in-charge for finished item of work.

Supply and fixing of 50mm NB size GM gate valve as per IS - 778 Class - I, Indian make heavy type or equivalent (ISI) make including cost and conveyance of gate valve, labour charges for fixing incidental charges, all leads and lifts etc., complete as directed by the Engineer-in-charge for finished item of work.

Supply and fixing of 25mm NB size GM gate valve as per IS - 778 Class - I, Indian make heavy type or equivalent (ISI) make including cost and conveyance of gate valve, labour charges for fixing incidental charges, all leads and lifts etc., complete as directed by the Engineer-in-charge for finished item of work.

Supply and fixing of 15mm NB size GM gate valve as per IS - 778 Class - I, Indian make heavy type or equivalent (ISI) make including cost and conveyance of gate valve, labour charges for fixing , incidental charges, all leads and lifts etc., complete as directed by the Engineer-in-charge for finished item of work.

Supply, Installation and commissioning approved make floor mounted close coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: Special Colour - Grade - III,bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series with 7 years warranty Chrome plated etc cost and conveyance of all materials,all taxes,including dismantling existing water closet, all labour, at all elevations etc., complete as directed by the Engineer-in-charge for finished item of work.

Supplying & Fixing Indian make Flat Back Wash Hand Basin with pedestal 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including cost of all metarials wooden block: 660 x 460 mm - Single C.P. Pillar cock,dismantling the existing wash basin etc., complete as directed by the Engineer-in-charge for finished item of work.

Supplying & Fixing white glazed flat back half stall urinals 1stquality conforming to IS:2556-1995 with standard C.P.Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indianmake : 410 x 265 x 305 mmincluding cost and conveyance of all materials, dismantling the existing urinal, all labour charges etc., complete for finished item of work as directed by the Engineer in Charge

Providing & Placing on Terrace 1000 Lts capacity polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes including cost, conveyance and lifting charges,check nuts for incoming, delivery and over flow pipe, S & F 25.4 mm copper ball cock ith PVC ball Indian make ISI mark to avoid over flow including cost and conveyance of all materials, dismantling the existing water tank and conveying to low laying area,all labour charges, incidental charges, all leads and lifts etc., complete as directed by the Engineer-in-charge for finished item of work.

SPECIALISED FIVE LAYER SYSTEM OF WATERPROOFING TREATMENT TO THE TERRACE WITH MIXGUARD HR5 System. Providing and laying five layers waterproofing cum heat reflective treatment (MIXGUARD HR5 or equivalent) over the old / new roof slab/ terrace, all as directed by Department Engineer-in-charge with the following specification and should be complain with the following technical parameters for the system - Density: 1.3 Gm/cc, Solids content: 68% ± 2% by weight, a)First Layer - Supply and Apply penetrative cum bonding primer as base primer cum sealer coat using MIXPRIME AC100 or equivalent modified with water and cement at the ratio 2:1:3 (MIXPRIME AC 100 : water : cement) by volume with a slow speed mixer machine. This compound shall be applied with sufficient thickness to cover the holes/pores/cracks @ 1.000 Liter / SQM (0.350 Lt of MIXPRIME AC100 / SQM) and the raw primer should be complain with ASTM 4541 and the Solid content 49% +2% b)Second Layer – Supply and apply of 2 x 2 mm welded with alkaline resistant coated / non-woven 40 Gsm verging fiber mesh MIXMAT GFM 50 or equivalent for a minimum over lap of 100 mm embedded in the primer coat c)Third Layer - Supply and apply of bonding cum water tight acrylic high viscous white primer MIXPRIME AC or equivalent @ 0.250 Kg / SQM d)Fourth Layer – Supply and apply of high elastomeric acrylic waterproofing cum weather proof high viscous white liquid membrane MIXGUARD HR or equivalent @ 0.500 Kg / SQM e) Fifth Layer - Supply and apply of fiber reinforced flexible high bride pure acrylic modified waterproofing cum heat reflective high viscous white liquid membrane MIXGUARD HRXtra or equivalent @ 0.500 Kg / SQM incliding all materials labour, leads and lifts etc complete.

Providing and fixing of stainless steel lettering of the organisation's Emblem 24"x24" and names with 18",12" and 8" size letters on the parapet wall of Turbine floor Building in Mini Hydel plant at Chettipeta with 20 guage SS sheet of 304 grade steel for front portion and 202 grade of 22 gauge SS steel for back portion of letters, including fitting charges at 13m EL, cost and conveyance of all materials , labour charges, scaffording charges for 13m EL with all leads and lifts charges etc., complete for finished item of work as directed by the Engineer-in-charge at site.

Replacement of rubber beading/glass putty/Alluminium clips to glass windows of 2.50mx1.5m size including labour charges for removing of existing glass carefully from windows,dismantling the damaged glass putty/rubber beading and refixing the glass with new rubber beading /glass putty/Alluminium clips,cost of rubber beading,glass putty,Alluminium clips etc., complete for finished item of work as directed by the Engineer-in-charge at site.

Supply and fixing glass panes of 5mm thickness to the existing door / window panes including fixing the beading,Alluminium clips ,cost of 5mm thick plain glass,cost of rubber beading,Alluminium clips etc., complete for finished item of work as directed by the Engineer-in-charge at site.

Providing and placing of 6'x6'x8' Height SECURITY CABIN made with 1) Iron structure 4" c chanal 4mm side sq pipes 60mm side posts and top section ,side walls and top 16 gauge G.I sheets(JSW) and 20x40 size pipes for supports and floor bord 18mm thick visakha cement particle board 2)1 door, 2 windows size 4'wx3'h with grills and base support 1feet ,sun shade 5x18"w 3) container roof & side wall paneling with 16mm fine wood seats & alluminium foil and flooring with pvc mat 4) Electrical wiring, 2 switch boards,2 led SQ LIGHT 1 NOS tube lights,1 NOS bulk head door light, 1 FAN (ceiling fan Crompton make) 5) Painting the outside cabin with recommended colour enamel paint 2 coatings and shellok wood polishing for interior wood with all leads and lifts,all labour charges for fabrication and fitting works,cost and conveyance of all materials as directed by the Engineer-in-charge at site for finished item of work.