Andhra Pradesh Power Generation Corporation Limited Tender

Supply of good quality cattle manure for plants, the rate includes cost and conveyance of all materials and stacking the same at specified locations in colony area as directed by the Engineer in charge.

Collection and supply of good quality Red soil for plant pits in colony area, the rate includes cost and conveyance of red soil, labour for filling, watering and tamping, all leads and lifts etc., complete for finished item of work as directed by the Engineer in charge. Red soil for plants shall be certified by agricultural/ horticulture specialist.

Excavation in loamy,clayey and sandy soils for plant pits whereever necessary and refilling the pits with excavated material after planting plants etc., complete for finished item of work as directed by the Engineer-in-charge. Excavation and backfilling shall be as per APSS 1317.

Supply and planting of flowering shrubs of different varieties like bougainvillae, nerium, kasturi, Ixora, Temple tree etc., of 1' to 2' height (for replacing casualities due to adverse weather conditions / any unintended reasons etc.) the rate includes cost and conveyance of plant, all labour charges, all leads and lifts, initial maintenance etc., complete for finished item of work and as directed by the Engineer-in-charge. Flowering plants shall be from accredited nurseries by Govt. of AP and certified by agricultural/horticulture specialist.

Supply and applying of Fungicides and insecticides once in 3 months for good growth of lawns, all varieties of flowering, fruit bearing plants, avenue plants etc., in colony open areas. The rate includes conveyance of all materials, T&P etc., complete for finished item of work as directed by the Engineer - in -Charge. (Insecticide-Monochrotophas/ Chlorophyriphos 20%-5 lts; Fungicide - Mancozeb M45 / Carbendazim 50% WP Fungicide/ Inorganic Fungicide -5 Kgs). Chlorophyriphos EC 20% shall confirm to IS 8944:2005 RA 2015. Monochrotophos SL 36% shall confirm to IS 8074 :1990 RA 2012, Mancozeb WP shall confirm to IS 8708:2006 RA 2015, Carbendazim (MBC) WP shall confirm to IS 8446:1991 RA 2017.

Replacement of the existing damaged cup board frame/shutter and fixing with new cupboard shutter of MDF board make greenply/newwood or equivalant, the rate includes cost and conveyance of all materials, labour charges, all necessary fixtures, removing charges, all leads and lifts etc., complete for finished item of work and as directed by the Engineer-in-charge. (Measurement will be area of MDF Board). Pre-laminated medium density particle board shall confirm to IS 14587: 1998; Grade 1, Type 1 or 2; both side laminated, Formaldehyde class E1. Note.: Colour and finish (glossy, matt, textured) will be specified based on requirement).

Supplying and fixing well seasoned sal wood/country wood/neem door frame made out of 75mmx100mm thick scantlings for main frame and painting the new wood work with two coats of enamel paint of grade I over one coat of wood primer and painting the wood surface in contact with masonry with one coat of solignum paint, the rate includes cost of wood, paints, all labour charges, hold fasts, all required fixtures and fittings, hire charges of T&P, conveyance charges etc., complete for finished item of work at all floors as directed by the Engineer-in-charge. Wooden door frame work shall be as per APSS 1002.

SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT): Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-in-charge. PVC material shall meet the requirements of IS 15226:2002 RA 2018-rigid PVC compounds- Code E, PVC extruded PVC profiles shall be as per ASTM D4726 18; fabricated door frame shall meet the requirements of IS 4021:1995 RA 2017.

SINGLE SIDE PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT): Providing and fixing factory made Pac single side Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two vertical door profiles are to be reinforced with 19X19mm MS. square tube of 19guage. The door frame shall be fixed to the wall using 65/100mm long MS. Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to be provided for each vertical member and minimum 2nos. for horizontal member etc. complete as per manufacture specification and direction of Engineer-in-charge. PVC material shall meet the requirements of IS 15226:2002 RA 2018-rigid PVC compounds- Code E, PVC extruded PVC profiles shall be as per ASTM D4726 18; fabricated door frame shall meet the requirements of IS 4021:1995 RA 2017.

Providing and fixing factory made solid Wood Polymer Composite (WPC shall confirm to ISO 20819-1: 2020 Type R40, Ex2) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 45x90 MM. The two Vertical members are to be joined together with the horizontal member using 8x60 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/ assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no's for horizontal member.

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite (WPC shall confirm to ISO 20819-1: 2020 Type R40, Ex2) single extruded door shutter with 3MMtop and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame.

Replacement of damaged glasses and rubber beedings of the existing windows/Cup boards with 5 mm thick plain glass and rubber beedings etc., the rate includes cost and conveyance of all materials like glass, rubber beeding, carpenter charges, tranportation charges etc., complete for finshed item of work as directed by the department. Plain glass shall confirm to IS 14900:2018

Cleaning of kitchen waste water pipe line jams and utility waste water pipe line jams by using suitable tools and tackles like bamboo sticks/ GI spiral etc., The rate includes all labour charges, supervision charges, safety amenities, hire charges of all T&P and other incidental charges if any etc., complete for finished item of work as directed by the Engineer-in-charge.

Repairs to the brush cutter, spraying machine, blades sharpening, motor repairs if any, replacing blades when damaged etc., complete for finished job work as directed by the Engineer in charge. Blade sharening shall be accompanied by checking/balancing to avoid vibrations.

Removing of natchu, goobi, thooti etc., once in three months from drains/ channels in all locations of B-colony incl. new F-type quarters,towards canal at Auditorium back side and wherever required including clearance if not more than 1 metre depth of water, rate includes all labour charges, materials etc., complete for finished job work as per APSS 301 and as directed by the Engineer in charge.

Attending repairs to the existing polyethylene water storage tanks provided at Terrace in all blocks by using polyethylene material and melting. Rate includes preparing the cracked surface, cleaning, melting the polyethylene strips using required tools, cost and conveyance of all materials, labour charges, all leads & lifts etc., complete for finishe ditem of work as directed by the Engineer in charge.

Hire charges of rotavator for levelling the vacant and open areas inside Swarnamukhi colony and removal of weeds/grass etc., the rate includes cost of fuel, wages of driver, repair charges etc., complete for finished item of work as directed by Engineer-in-charge.

Labour charges for removal of plants grown along the toilet drain pipes outside of the quarters at 2nd floor to 5th floor level by using ropes, application of acid/ cement to avoid further growth of plants, rate includes all labour charges, materials cost etc., complete for finished item of work as directed by the Engineer in charge.