Andhra Pradesh Power Generation Corporation Limited Tender

Supply of 12 mm HBG metal as per APSS 108 as per the indian standard code of practice, including conveyance and seigniorage charges, loading, unloading, stacking neatly, in the designated storage area as per the directions of engineer incharge complete for finished item of work.

Supply of .20 mm HBG metal as per APSS108 as per the indian standard code of practice, including conveyance and seigniorage charges, loading, unloading, stacking neatly, in the designated storage area as per the directions of engineer incharge complete for finished item of work

Supply of Sand for concrete as per APSS.110 as per the indian standard code of practice, including conveyance and seigniorage charges, loading, unloading, stacking neatly, in the designated storage area as per the directions of engineer incharge complete for finished item of work.

Supply of Sand for Mortar as per APSS.110 as per the indian standard code of practice, including conveyance and seigniorage charges, loading, unloading, stacking neatly, in the designated storage area as per the directions of engineer incharge complete for finished item of work.

Supply of Gravel confirming to APSS 138, as per the indian standard code of practice, including conveyance and seigniorage charges, loading, unloading, stacking neatly, in the designated storage area as per the directions of engineer incharge complete for finished item of work.

Soiling with hard stone of 150-225mm shall confirming to APSS 106 including 25% of Metal of 40 to 80mm size confirming to APSS 108 for packing and 20% gravel for filling interstices and compacting with 80-100KN Power Roller including hire charges of Power Roller, watering etc,. Complete for finished item of work as per APSS 619.3 and APSS 619.4

Brick Masonry in CM (1:6) with fly ash cement Bricks as per IS 12894-2002 class-5 , size 290 x 225x140 mm with compressive strength not less than 50kg /sqcm including cost and conveyance of all materials,labour charges,all leads&lifts, scaffolding charges etc complete for finished item of work as per APSS 504 and as per directed by engineer in charge.(Cement will be issued by Department)

Laying P.C.C (1:4:8) using 20 mm HBG machine crushed metal, the rate includes cost and conveyance of all materials including seignorage charges at site, labour charges, hand mixing charges, curing and all leads & lifts etc., complete for finished item of work as per APSS 402 and as directed by Engineer-In-Charge.(Cement will be issued by Department at free of cost from departmental stores

Cutting, bending, placing in position and tying of reinforcement steel of all sizes of Fe 500 grade HYSD bars as per IS 1786-1979 for Footings, pedestals, beams and slabs,drain walls etc., the rate includes cost and conveyance of all materials, all labour charges, T&P, all leads and lifts etc., complete for finished item of work as per r APSS 403 and as directed by the Engineer-in-charge. (Steel will be issued by the Department at free of cost from departmental stores)

RCC M- 20 nominal mix (cement, fine aggregate, coarse aggregate) for corresponding to the table of IS 456 using 50% of 20 mm & 50% of 12 mm machine crushed hard granite metal (coarse aggregate) from approved quarry, the rate includes cost and conveynace of all materials like cement, fine aggregate, coarse aggregate, water etc., to site including seigniorage charges, all operational and incidental charges, labour charges such as laying concrete, curing, machine mixing charges, shuttering and centering charges etc., complete for finished item of work as per APSS 403 and as directed by the Engineer-In-Charge. (But exculding cost of cement, steel and its fabrications charges.)

Plastering with CM (1:4) 12 mm thick including cost and conveyance of all materials, labour charges, scaffolding, curing, all leads and lifts etc., complete for finished item of work as per APSS 903 and as directed by the Engineer in charge.(Cement will be issued by Department at free of cost)

Painting to walls with 2 coats of acrylic emulsion water proof weather proof paint for external walls with approved brand (Berger or equivalent ) shall conform minimum to IS 15489:2013 RA 2018; Type 2 and shades after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, the rate includes cost and conveyance of all materials to work site, labour charges, all operational & incidental charges etc,. complete for finished item of work as per APSS 1216 and as directed by Engineer-in-charge.

Painting to walls with one coat of Plastic emulsion paint ( Berger Easy clean) shall conform minimum to IS 15489:2013 RA 2018; Type 1 for internal walls and approved shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, the rate includes cost and conveyance of all materials to work site, labour charges, all operational & incidental charges etc., complete for finished item of work as per APSS 1216 and as directed by Engineer-in-charge.

Painting to walls with two coats of plastic emulsion paint of (Berger Easy clean) shall conform minimum to IS 15489:2013 RA 2018; Type 1 for internal walls and approved shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, the rate includes cost and conveyance of all materials to work site, labour charges, all operational & incidental charges etc., complete for finished item of work as per APSS 1216 and as directed by Engineer-in-charge.

White Washing two coats with lime of approved quality confirming to IS 712:1984 to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials upto 3.66m height including cost of all materials ,labour charges and incidental charges such as, lift charges etc., complete as per IS 6278:1971fro finished item of work and as directed by Engineer-in-charge.

White Washing two coats with lime of approved quality confirming to IS 712:1984 to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials in first floor including cost of all materials ,labour charges and incidental charges such as scaffolding,lift charges etc., complete as per IS 6278:1971fro finished item of work and as directed by Engineer-in-charge.

Painting to old metal surfaces by surface cleaning of old metal surfaces with hand and power tool cleaners and removing dust. After cleaning, applying primary coat with one coat of Epoxy Primer paint shall condorm to IS14589: 1999 RA2014, Grade2, followed by one finish coat of high built epoxy paint MIO shall conform to IS 16943:2019, with all scaffolding and safety arrangements including all material except paints and thinner, all labour charges, all accessorioes, at all elevations etc., complete for finished item of work as per APSS 903 and as directed by the Engineer-in-Charge. (The paints including Thinner will be issued by the department at free of cost from departmental stores)

Painting to walls with one coat of primer, Red oxide shall confirm to 2074:2015 and one coat of synthetic enamel paint shall confirm to IS 2932: 2013 for external walls/ shoulder kerbs with approved shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, the rate includes cost and conveyance of all materials to work site, labour charges, all operational & incidental charges etc., complete for finished item of work as per APSS 1212 and as directed by Engineer-in-charge. (The paints including Thinner will be issued by the department at free of cost from departmental stores)

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13712, IS:13630 (Parts 1 to 15), IS Code 15622:2017 (Pressed Ceramic Tiles- Specifications) of any colour and finish in all shades (as specified by the engineer incharge) and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like sand, tiles, all labour charges etc., complete for finished item of work as per APSS 707and as directed by Engineer-in-charge. (Cement will be issued by Department at free of cost)

Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specification including premixing the material with water at OMC in machanical mixer ( Pug Mill), carriage of mixed materials by tipper to site, laying in uniform layers in two layers in base course on a well prepared sub.base and compacting with 80 -100 kN weight vibratory roller to achieve the desired density including lighting, barricading and maintenance of diversion etc as per table 400.11&400.12 and technical specification clause 406 MORD/MORTH.