Andhra Pradesh Medical Services And Infrastructure Development Corporation Tender

Supply and erecting fully automatic line voltage stabilizer for operation on input voltage 200V to 250V rated for 1 KVA maximum load and time delay model with 16A, 3-way connector/ socket for output and with 3 core flexible chord and 3 pin 6/16A plug top for input suitable for refrigerator for continuous operation including cost and conveyance of all mateials and all labour charges etc., complete. Stabilizer Capacity : 4 KVA Stabilizer Makes : V-Guard/Real Guard/Uni Stab/ITL

Supply, Transportation, Installation, Testing and Commissioning of the following Inverter model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat, cool, dehumidifying, air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord with cordless remote control etc., dual barrier coating in order to protect coil form oxidigation and with copper condenser only. 1.5 TR 5 star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32/ R-410A, COP not less than 4.5 Makes: Mitsubishi MSGN18VF /OGeneralASGA18JCC/ ToshibaRAS18N3KCV/Blue Star PAFU-DAFU series /Daikin FTKC50NVM / Hitachi / Carrier or their prevailing models with above specifictions.

Supply, Fabrication of 1set MS bracket suitable for fixing out door unit of split AC unit.

Supply and Fixing of single phase DB in sheet steel enclosure as per IS 8623; IS 13032; IEC 61439-3 with metalic plug and socket with 1 No. 20/32A,10KA 'c' curve SPMCB control including labour charges and giving connections etc., complete concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager-Novello+/Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ L&T-AU .

Supply, Transportation and Fixing of 60W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, supply Input voltage 120-270 V AC, P.F0.90, high power LEDs having system efficacy120 lm/W and junction temprature70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5/Sec-3), Driver surge protection 4KV, external Surge protection 10 KV with optics distribution, THD 10% at 110 Volts AC, driver efficiency 90%, CCT:3000K-5700K, minimum CRI70, etc., complete including fixing of luminaire on wall/Pole with 1.0 mt of 40mm dia GI pipe bracket and anti-tilting MS flat, 3 core 1.5 Sq.mm sheathed flexible round copper cable including all labour charges and giving connections etc., complete with 5years warranty. a) Luminaire make: Wipro(Skyline)/Philips (Green line) / GE-Venture / Crompton(Nexus star) / Bajaj (Edge) / Havells (Endura Pearl) b) LED make:Philips Lumileds/ Cree/Nichia/ Osram/Samsung/LG LEDs

Labour Charges for Stringing, binding and Jumpering etc., of Existing Conductors of L.T. Over head lines including Scaffolding charges Etc., Complete

Total:

Oxyzen Lines

Supply and fixing of Copper Pipe Lines of 15 mm dia. 0.9 mm thick for distribution, pipes shall be half drawn, tempered, seamless,phosphorous deoxidized, non arsenic and dereased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2, including cost with Lloyd Test Certification and conveyance of pipes, necessary specials, made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges, including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work Make: Mexflow(Rate approved in SE/APMSIDC Eluru District Hospital Machilipatnam)

Supply and fixing of Copper Pipe Lines of 12 mm dia. 0.7 mm thick for distribution, pipes shall be half drawn, tempered, seamless,phosphorous deoxidized, non arsenic and dereased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2 with Lloyd Test Certificaton, including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work Make: Mexflow (Rate approved in SE/APMSIDC Eluru District Hospital Machilipatnam)

Supply and fixing of All dia Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vaccum, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all mateials, taxes, transportation chrges, fixing charges and testing charges and all labour charges etc. comlete for finished item of work.Make Conex/Pex. Manufacturer should be ISO certified, Products should be NFPA 99/HTM compliant with CE/BIS approval. The valve should be factory degreased before supply. Certificate from the manufacturer should be attached.(Rate approved in SE/APMSIDC Eluru District Hospital Machilipatnam)

Supply and fixing Gas Outlet Points for Oxygen Air and Vaccum with S Brackets, self ceiling bross valves with nut and cap and it shuld be 100% self sealing type , so that at the time of removal of probe, it shuld stop gas flow automatically, out let shuld be single hand insertion, non inter changeable for specific gas, it should accept only correct medical gas adapter. with down tube of the specific gas should be brazed with brass bracket of the outlet, there after brass bracket should be fixed in wall with the help of the steel screw, with self sealing valve which should be screwed with the front portion of brass bracket and there after it should be covered by plastic cover duly colour coded as per specific gas, design of outlet should be such that it can be installed vertically on wall, horizontally on ICCU panel and also vertical to fit in pendants including cost and conveyance of all materials, errection charges, commissioning charges and all other labour charges etc, complete for finished item of work. (Oxygen-323, Nitrous Oxide-15, Air -145 & Vacuum -161) Rate Approved in SE/APMSIDC Eluru District Hospital Machilipatnam

Supply and fixing of BPC Flow meter with Humidifier bottle and L adapter near out let point, flow meter body made of brass material and should be back pressure compensated suitable for accurate gas flow measurement and control within a range of 0-13 litres per minute, flow tube and components should be mae of clear impact resistant polycarbonate and Humidifier shuld have built in safety valve and should be made of unbreakable polycarbonate material and autoclavable at 134 degrees centigrade, including cost and conveyance of materials, errection chages, commissioning charges etc. for finished item of work Rate Approved in SE/APMSIDC Eluru District Hospital Machilipatnam

Supply and fixing of Suction Jars of 600 ml capacity at outlet points with regulator and pressure pipe connections made of unbreakable poly carbonate material which is fully autoclavable at 134 degrees centigrade including cost and conveyance of all materials, errection, commissioning chages and all labour charges etc. complete for finished item of work.

Total:

Plumbing

Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors. Flush Tank

Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern with internal components and fixed using required size of nails and screws, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors. Flush Tank Livers

Supplying and Fixing of 1/2 inch PVC taps including Labour charges complete

Supplying and Fixing of 1/2 inch PVC inlet including Labour charges complete

Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia. first quality Indian make heavy duty, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges, overheads & contractors profit etc., complete for finished item of work. Angle Valves

Supplying and fixing Bib cock Jaquar Continental series Chrome finish as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors. Pillar Cock

Supplying and fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work 31.75mm dia. PVC flexible waste pipe

Total:

Furniture:

Bed Side Lockers ( ABS):- Made of Abs (Acrylonitrile Brtadiene Styrene) size: 450X450X760, one drawer, One towel Rail, 50mm Castors, Tower hangers both sides Certificates: Manufacturer should have IOS:9001

Chairs for Doctor :- Comfortable Executive Chair upholstered in Bonded leather and PVC Peadded seat and back for all-day comfort and support pneumattic seat height adjustment; 360 degree swivel; smooth rolling caters Measures 29.13 by 25.59 by 41.34 to 45.08 inches (L X W X H) maximum weight capacity 124.7 KGS Base: 700 mm Dia nylon base with 50mm castors for stability and easy Pneumatic height: Change the height of the chair relative to the floor by 100mm. Certificates: IOS 9001, BIS/Notified CE

Dressing Trolley:- Standard dressing trolley of dimensions Approx 765 mm X 450 mm X 820 mm. framework made of SS Tubes and SS Shelves SS Grade 304. on the side of shelf two SS rings of diameter 200 mm-250 mm for placing wash basin and bucket. On top shelf in one corner a rectangular SS holder of 150 mm X 100 mm. robust 360 Degrees rotaing wheels of 100 mm diameter with locks in two. A variation of + or - 10mm is acceptable in point no.1 A variation of + or - 5mm is acceptable in Point no.3, 5 & 7. Certificates: BIS/Notified CE/USFDA and ISO 13485

Almirahs SS:- Internal Size of Almirah: 1850(H) X 900 (W) X 450 (D) mm, Leg Size of Almirah: 150 (H) X 120 (W) X 450 (D) mm, Rack with 5 compartments. Distance between each shelf will be 360 mm. These 4 shelves should be hanging arrangement (adjustable). One shelf should have internal door and lock. Standard lock and 2 sets of keys. The thickness of the almirah sheet shall be 18 SWG. The body of the almirah shall be manufactured from cold rolled M.S sheet for making almirah shall be free from any pitting and corrosion ect. H/D rubber bushes shall be provided to the bottom of legs of almirah. Certificates: ISO 9001 and BIS/Notified C.E

Iron Racks / L Angular Rack :- Size: 2130 (H) X 1080 (W) X 380 (D) mm Rack with 5 Compartments of 6 nos of shelves. Distance between eah shelf will be 410 mm. these 6 shelves shoul be hanging arrangement (ajustable). Racks shall be manufactured from 18 SWG thick sheet . The rack shall be essembled with G I bolt nuts and washers. slotted angel and M.S Sheet shall be madeof cold rolled with anti rust treated and shall be finished with powder coating (Color: Prince grey). H/D Rubber bushes shall be provided to the bottom of legs of slotted angle racks. The Quality of M.S sheet which is used for racks shall be free from any defect, undulations, and old paints and surface corrosion, etc Certificate: IOS 9001, BIS/CE

Wheel Chair (Foldable):- Patient Wheel Chair Foldable : Stainless Steel, Width: 23.5'' (19 seat), Length/Depth: 24'', Weight Capacity: 180 Kg. Seat Width: 19'', Seat Depth: 16", Seat to Floor height: 19" , Back Height: 17'', Arms: Fixed Full, ABS Anti-Skid hand rail. Front Riggings: Swing - away steel Footrests. 5 Cm 50 PU Density foam cushioned top and Back covered with leathered Rexene of 2 mm Thickness. Rear Axie: Single position 12 mm. All the stainless steel should be 304 Grade/16 Gauge. Certificate: Should be BIS/Notified CE/USFDA and ISO: 13485

Plastic Chairs/Chair:- The Seat and back are made or injection moulded high impact strengh polypropylene polymer compound with indoor grade UV Resistance. The powder coated (DFT50 + Microns) weled tubular frame is made from 2.22 + 0.03 cm X 0.16+/- 0.0128cm and 3.5+/-0.03 cm X 1.5+/-0.03 cm X 0.16 +/- 0.0128 cm M.S.E.R.W tub the shoes are made of high impact strength polypropylene polymer compound with indoor grade UV Resistance and pressed fitted with tubularframe. Size: (W)52.5cm*(D)55.8cm*(H)84.5cm*(Seat H) 45.0 cm. Seat Size 52.5cm(W)*53.2 cm(D). Back Size 51.6 cm (W)* 40.5 cm(H).

Wooden Tables:- Material: Wooden, Size:40L X 24W X 30H(inch), Color: Brown, Usage/Appication : Corporate Office, Thickness: 18mm, Country of Origin: Made in India Rate Approved in Online

Total:

Grand Total