Andhra Pradesh Medical Services And Infrastructure Development Corporation Tender

Supply and fixing powder coated aluminium door with door using aluminium sections of 63.50 mmm x 38.10mm , 1.50 mm thick for frame and door shutter made Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) Double extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It the frame using 3 inch /4 inch hinges. A will be fixed to minimum of 4 hinges will be required for fixing the door with the frame, complete. as approved by Engineer-in-Charge including supply and fixing ISI marked powder coated aluminium fixtures of 3 Nos. of butt hinges (IS:205) of 100mm long(for each shutter), 1 Nos.tower bolts 10mm bolt (IS:204) 125mm long , 2 Nos.alluminium handles (IS:208) 150mm dia and 1 Nos. aldrops (IS:2681) 250mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc., t complete for finished item of work. (The Aluminium section used shall be standard make confirming to IS 1948 – 1961) and as approved by the Engineer) (Toilet Door - 750mm x 2100mm)

Supply and fixing powder coated alimunium sliding window with fixed fan light at top as per approved drawings with all required accessories such as stoppers,bolts,weather stripping etc. for all sizes and sections in accordance with approved drawings and as per IS 1948-1961 with top section of window of size 62mm x 32mm ,1.47mm thick, window side frames of size 61.85mm x 31.75mm,1.50mm thick and bottom frame size 61.85mm x 31.75mm,1.50mm thick sloping outwards for drainage and fixed and sliding shutters with bottom,sides and top with section of 40mm x 18mm ,1.70mm thick,inter locking section 40mm x 28mm x 18mm,1.60mm thick inter locked for weather scaling and mounted on nylon rollers of lift type and fan light top &side sections of size 63.50mmx38.10mm,1.53mm thick, powder coating of all alluminium sections 25mm microns thick and fixing 5mm thick plain glass in fan light and 5mm thick ground glass for shutters fitted with alluminium glazing clips and rubber beading, powder coating of all alluminium sections 25mm microns thick including cost and conveyance to site of powder coated aluminium sections, glass, rubber beading , fixtures etc., including labour charges for manufacturing window, fixing in position using wooden blocks and sheet metal screws, overheads & contractors profit etc., complete for finished item of work. (The aluminium sections used shall be standard make confirming to IS 1948-1961 and as approved by the Engineer and fixtures shall be of ISI marked) (1200mm x 1800mm)