Andhra Pradesh Medical Services And Infrastructure Development Corporation Tender

1 .Manman Drilling Handpiece. 2. Reaming Handpiece. 3. Sagittal saw Handpiece. 4 . K wire driver attachment handpiece.

1. Microcontroller based isolated Electrosurgical Generator having both Monopolar and Bipolar outputs designed for all surgical procedures. 2. Smart generator should be able to monitor changes in tissue impedance continuously and adjusts power. 3. Monopolar outputs should have three cutting modes: a) Low cut for delicate tissue or Laproscopic cases having maximum power of 300w. b) Pure cut for clean, precise cut in general surgery having maximum power of 200W. c) Blend mode for cutting with homeostasis having maximum power of 200W. 4. It should have three Coag Modes with maximum power of 120W. a. Desiccate mode for low voltage contact coagulation suitable for Laproscopic and delicate tissue work. b) Fulgurate mode for efficient non-contact coagulation in most applications. c) Spray mode should have randomized spray effect of varying amplitude and frequency for coagulating large tissue areas with minimum depth of necrosis. 5. It should have three bipolar modes with maximum power of 70W. a) Precise mode have fine control of desiccation in delicate tissue. b) Standard mode for applications at low voltage to prevent sparking. c) Macro mode for applications on tissue with high resistance. 6. It should have patient plate monitoring facility and should give audiovisual alarm and deactivate output if contact between patient and patient plate is not proper to eliminate the risk of patient burns. 7. The unit should have two hand switching and two Footswitch Monopolar outputs and one hand switching and footswitching bipolar output. 8. It should have membrane keyboard for power settings. 9. The unit should have individual digital display of power for Bipolar, Monopolar cut and Monopolar Coag. 10. The unit should not have RF Leakage current more than 150mA.

Cuff PressureRange : 100 to 450 mmHg. Pressure Regularion : 1 to 10 mmHg. Online Settings : Increase and decrease in pressure settings in the range : 1 to ± 10 mmHg. Timer : Range from 3 hours to 20 minutes. Internal Least Count : 20 minutes to 03 hours. Alarm : Guides audible alarm on timer reaching set value. Quick Release : Pressure is released from the cuff without effecting the timer. Memory : Pressure set in earlier session is stored and displayed when the machine is switched on again. Cuffs : 2 sets of different sizes of cuffs-washable and easy fitting (Paediatric, small, medium,big & large). Big & large cuffs are conical shape. Should be autoclavable. Should be provided with Dual Channel tourniquet where 2 cuffs can be connected independently.

Fogger Machine

Manual Hydralic Table

0 ° Degree – 4mm and 70°- 4mm Thickness.

1. Test Frequencies : 125,250,500,750,1000,1500,2000,3000,4000,6000,8000 HZ. Hearing Level Range : 10dBHL to 100 dBHLin 1 and 5 dB steps.