Andhra Pradesh Medical Services And Infrastructure Development Corporation Tender

Panel board and Cable, GGH, Kadapa;Supply Installation Testing & commissioning of free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated/epoxy/PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness,separate detachable, gland plate M.S. base channel, hinged door with locking arrangement for equipment/ switchgear. Thickness of sheet shall not be less than 1.6mm up to 600mm length/width of any compartment and be of 2.0mm above 600mm. Load bearing structure shall be of 2.0mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure, with required size of G.I. earth bus bar etc., complete. (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator). Incomer :- 250A Four Pole, MCCB of adjustable, confirms to IEC - 1no, Outgoing feeders:- Supply of 125A, 3 Pole, Adjustable, Confirms to IEC - 8 Nos , Supply of 63/60A, 3 Pole, Adjustable, Confirms to IEC - 2 Nos , Metering:- Supply and Fixing of (0-500) V range Volt meter on existing panel - 1 No,, Supply and Fixing of CT operated direct reading type Ammeter, below 500A, on existing panel - 1 No, Supply and Fixing of Current Transformer - 3 Nos, 240/220 V, LED (22.5 mm dia) Pilot lamp Red & Yellow Colour with integral circuit, terminal block, - 2 Nos, 240/220 V, LED (22.5 mm dia) Pilot lamp Blue Colour with integral circuit, terminal block, - 1 No, selector switch for voltmeter (4 position)- 1no, Supply and Fixing of CT linked selector switch of 10 A for Ampere meter - 1 No, 10 kA - 6-32A range SP MCBs. - 6nos, Bus Bars:- Supply and fixing of Electrolytic grade aluminium bus bars by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves, For Phases & Neutral ((40x8x1.5x2.7)/1000) x 4 = 5.18 Kg, Links for outgoing MCCBs ((25x8x0.8x2.7)/1000) x 4 x 8 = 13.82 Kg , Control wiring with suitable size of approved make FRLS PVC flexible copper wires, Earth Bus Bar, Door Loop earhtings, Ferrules, Feeder identifications, danger plate, door locks etc., labour charges for errection of switch gears, panels boards, with all other accessories including all labour charges etc with connections for finished item of work including transportation charges @ 5%,

Panel board and Cable, GGH, Kadapa;Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel/RPG / Finolex / V-Guard , 3.5 core, 70 Sq.mm

Panel board and Cable, GGH, Kadapa;Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster / Polycab /RR Kabel/RPG / Finolex / V-Guard , 3.5 core, 120Sq.mm