Andhra Pradesh Medical Services And Infrastructure Development Corporation Tender

Brick masonry for panel walls in superstructure with CM (1:8) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Flooring with soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) Second Floor

Providing and fixing in true horizontal level 15 mm - Mineral Fiber Ceiling tile of 595 x 595 (Square edge Fissura fine model) using hot dipped Galvanized Steel section exposed surface with pre-coated capping, main Tee of size 24 x 32 mm at every 1200 mm c/c maximum and rotary stitched cross tee of size 24 x 27 mm at every 600 mm c/c and sub-cross tee of size 24 mm x 25 mm at 1200 mm c/c and wall angle of size 19 x 19 mm fixed to periphery of the wall and the above grid is suspended at every 1200 mm c/c in both directions using 2.0 mm thick pre-straightened GI Wire including cost and conveyance of all materials and labour charges such as cutting , fixing of standing of frame work exposing roof making, overheads & contractor profit etc., complete for finished item of work in all floor in all floors. Second Floor

Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows three track - two glass shutters sliding and one mesh shutter duly manufactured using UPVC reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing, overheads and contractors profit etc., complete for finished item of work

Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm.,including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site, overheads and contractor profit etc., complete for finished item of work.

Supply & application of two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Supply and Fixing of 25mm dia 2.0mm thick surface P.V.C. pipe (ISI MARK) with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains. Make sudhakar/Modi

Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose/BH/SBH Modular switches with cover plate including all labour charges etc., complete for Light, Fan, Exhaust Fan etc., complete. (for Non Residential Building) Makes of wires:- Finolex / RR kabel / Havells /KEI / Gloster/ Polycab / Bonton / V-Guard / GM / Million /HPL / Goldmedal / Finecab /Fortune Art / Kundancab/ Sudhakar/ Orbit/ Standard/ Tamra/ Anchor Makes of switches:- Legrand Arteor / chneider Zen celo/ CrabtreeMurano or Amare/L&T-englaze / GM-Zenova/ Goldmedal(i- Push) Legrand Myrius / Crabtree verona / L&T/ HPL/Schneider Livia/ GM- Zicono/ C&S/Goldmedal(Curve/Air) /Million Mway / Logus Platina/ Panasonic Vision / SalzerS90series/ Precision/ Koncept (Samrat/Qura) / Ploycab(Levana) / Anchor-Roma/ Amron/IndoAsian/Pointer

Wiring with 2 runs of 22/0.3mm ( 1.5 Sq.mm) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch, Ceiling rose/BH/SBH Modular switches with cover plate including all labour charges etc., complete for Light, Fan, Exhaust Fan etc., complete. (for Residential Building) Makes of wires:- Finolex / RR kabel / Havells /KEI / Gloster/ Polycab / Bonton / V-Guard / GM / Million /HPL / Goldmedal / Finecab /Fortune Art / Kundancab/ Sudhakar/ Orbit/ Standard/ Tamra/ Anchor Makes of switches:- Legrand Arteor / chneider Zen celo/ CrabtreeMurano or Amare/L&T-englaze / GM-Zenova/ Goldmedal(i- Push) Legrand Myrius / Crabtree verona / L&T/ HPL/Schneider Livia/ GM- Zicono/ C&S/Goldmedal(Curve/Air) /Million Mway / Logus Platina/ Panasonic Vision / SalzerS90series/ Precision/ Koncept (Samrat/Qura) / Ploycab(Levana) / Anchor-Roma/ Amron/IndoAsian/Pointer

Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits including labour charges etc., complete as required for switch boards. Makes of wires:- Finolex / RR kabel / Havells / APAR E-beam / KEI / Polycab / Bonton / V-Guard / GM / Million / HPL / Goldmedal / Finecab / Vimal / Fortune Art / Gloster / Kundan cab/Sudhakar

Supply, Fixing and Transportation of 18W/20W, 1200mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF0.9, Surge protection: 2KV,THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, .etc., complete. with Fixing of 18W/20W LED luminaire on wall / Ceiling with / TW round blocks with all accessories including giving connections and all labour charges etc., complete. Makes: Wipro / Phillips /Lighting Technologies(LT) / GEVenture / Crompton / Bajaj / VIN /Halonix/Jaquar/HPL/Havells/GM / Surya / Pharox/ C&S / Greenlites / Fortune Art / Capart / Ib LED/Promtec/Eveready / Goldmedal / Syska /Stanjo/ Enrich/Opple b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / EVERLIGHT/ San'an

Supply and Transportation of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with double ball bearings without Regulator. Makes: Crompton HS Decora / Bajaj Regal Star / Havells ES Plus / Orient summer crown / Usha technix decorative

Supply and fixing of Modular type Electronic fan regulator hum free step type socket size in the existing switch board.

Labour charges for fixing of ceiling fan with regulator including transportation, 3 core wire leads etc complete

Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete

Supply and installation testing and commissioning of 15 Watt column speaker (Makes: Philips/eqvt) including cost all taxes etc complete for finished item of work as directed by the engineer-in-charge.

Supply of wire less Hand Held Microphone with receiver Model No: PVD-57 ( H) etc.Make : Mega.

Supply and laying of shielded twin twisted pair 1.0 sqmm cable in existing conduit.

Supply, installation, testing and commissioning of 120W amplifiers for public addressing system suitable for operation on 230V, 50 Hz single phase Ac supply including all labour charges etc., complete.,

Testing and commissioning of the Public Address system

Supply and Fixing of High brightness DLP projector with 5,000ANSI Lumens for lights-on presentations in large area. Make:- Hitachi/BenQ/Sony/Panasonic/LG

120" Motorized projection screen with remote control (Make:Pro lite)

Supply and fixing of 18W Pin type CFL Lamp. Makes: Wipro / G.E. / Phillips / Crompton / Bajaj / Havells / Surya / HPL / Halonix.

Supply and fixing of 24" (600mm) Wall mounting / Pedestal Air Circulators. Makes: Crompton / Havells Turbo Force / Almounard.