Andhra Pradesh Medical Services And Infrastructure Development Corporation Tender

Supply & application of one coat water based cement primer of interior grade I and two coats of synthetic polymer luxury plastic emulsion paint of superior grade having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work in all floors.

Supply & Fixing of Lead Lined Stainless steel Clean room door frames and shutters made of Stainless steel grade of 304 hairline finish, frame with 1.60mm (16SWG) thick hairline finish Stainless steel grade of 304 formed to Single/double rebate profile of size 100 mm x 58mm/ 143 x 58 mm, door frames with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level, the shutter with 1.2 mm thick hairline finish Stainless steel grade of 304 formed to provide a 46mm thick fully flush, double skin door shell with Lock Seam joints at stile edges with a single / multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on radiation level. The lead sheets extend the full width and height of the door. Lead thickness is to be equal to the shielding in the adjacent wall. Hardware can be provided with Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter etc., including overheads and contractor profit etc., complete for finished item of work in all floors

Supply and fixing Gas Outlet Points for Oxygen / Air / Vaccum with S Brackets, self ceiling bross valves / din type outlets with nut and cap and it shuld be 100% self sealing type , so that at the time of removal of probe, it shuld stop gas flow automatically, out let shuld be single hand insertion, non inter changeable for specific gas, it should accept only correct medical gas adapter. with down tube of the specific gas should be brazed with brass bracket of the outlet, there after brass bracket should be fixed in wall with the help of the steel screw, with self sealing valve which should be screwed with the front portion of brass bracket and there after it should be covered by plastic cover duly colour coded as per specific gas, design of outlet should be such that it can be installed vertically on wall, horizontally on ICCU panel and also vertical to fit in pendants including cost and conveyance of all materials, errection charges, commissioning charges and all other labour charges etc, complete for finished item of work.

Supply and fixing of Copper Pipe Lines of 12 mm dia. 0.9 mm thick for distribution, pipes shall be half drawn, tempered, seamless,phosphorous deoxidized, non arsenic and dereased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2, including cost with Lloyd Test Certification and conveyance of pipes, necessary specials, made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges, including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work Make: Mexflow

Supply and fixing of Copper Pipe Lines of 15 mm dia. 0.9 mm thick for distribution, pipes shall be half drawn, tempered, seamless,phosphorous deoxidized, non arsenic and dereased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2, including cost with Lloyd Test Certification and conveyance of pipes, necessary specials, made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges, including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work Make: Mexflow

Supply and fixing of Copper Pipe Lines of 28 mm dia. 0.9 mm thick for distribution, pipes shall be half drawn, tempered, seamless,phosphorous deoxidized, non arsenic and dereased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2, including cost with Lloyd Test Certification and conveyance of pipes, necessary specials, made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges, including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work Make: Mexflow

Supply and fixing of 15 mm dia. Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vaccum, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all mateials, taxes, transportation chrges, fixing charges and testing charges and all labour charges etc. comlete for finished item of work.

Supply and fixing of 28 mm dia. Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vaccum, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all mateials, taxes, transportation chrges, fixing charges and testing charges and all labour charges etc. comlete for finished item of work.

Supply and fixing of Oxygen flow meters with Humidifier bottles

Supplying & Fixing of 3mm thick foam boards as per direction of Engineering - in-Charge, including cost and conveyance of all materials and labour charges such as Design ,Printing & cutting , overheads & contractor profit etc., complete for finished item of work in all floor in all floors.

Supply and fixing of Aluminium Architectural cartain walls using 5mm thick Tinted-Bronze /brown plain glass to full height and all round outer frame powder coated aluminium section 50mmx50mm, 1.5mm thick , Verticla & Horizontal (Internal) powder coated aluminium section 50mmx50mm,1.5mm thick, window using powder coated alluminium section 50mmx25mm, 1.5mm thick including labour charges for manufacturing window, fixing thewindow with required No.of screws etc., including overheads & Contractors profit complete for finished item of work. (The Alluminium section used shall be standard make conforming to IS 1948-1961) and as approved by the Engineer) (7.25 m x 3.40 m).

Supply and fixing of Aluminium Architectural cartain walls using 5mm thick Tinted-Bronze /brown plain glass to full height and all round outer frame powder coated aluminium section 50mmx50mm, 1.5mm thick , Verticla & Horizontal (Internal) powder coated aluminium section 50mmx50mm,1.5mm thick, window using powder coated alluminium section 50mmx25mm, 1.5mm thick including labour charges for manufacturing window, fixing thewindow with required No.of screws etc., including overheads & Contractors profit complete for finished item of work. (The Alluminium section used shall be standard make conforming to IS 1948-1961) and as approved by the Engineer) (4.75 m x 3.40 m).

Supply and Fixing of 25mm outer dia (1.60 to 1.80)mm thicknes medium grade with IS:9537 part 3 FRLS rigid P.V.C. pipe (ISI marked) on wall with all required MS junction boxes and all accessories for run of mains including all labour charges etc., complete. Makes : Precision/ Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Polycab/AKG

Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges etc., complete as required including labour charges for 16A sockets & AC plugs.Makes of wires:- Finolex / RR kabel/ Havells/KEI/Polycab/ Goldmedal/GM/Million

Supply & run of 5 of 10.0 Sqmm (phases, neutral and earth) FRLS / FRLSH / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in the existing conduict pipe for run of mains from Power panel board to TPN DB"s with pin type lugs and connections etc., complete. [for PDBs] Makes of wires:- Finolex / RR kabel/ Havells/KEI/Polycab/ Goldmedal/GM/Million

Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 2.5 mtr length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode with Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip with all accessories and labour charges complete as per IS specification 732/1982 (Part II).

Supply and Run of No. 8 SWG copper wire including cost of all accessories and labour charges etc., complete.

Supply and Fixing of single phase DB in sheet steel enclosure as per IS 8623; IS 13032; IEC 61439-3 with metalic plug and socket with 1 No. 20/32A,10KA 'c' curve SPMCB control including labour charges and giving connections etc., complete concealed in wall. Makes for DBs: Legrand(Ekinox 3) / Schneider-Acti9/Hager-Novello+/Seimens/L&T-Newrange and Makes for MCBs: Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ L&T-AU .

Supply and Fixing of of 16A/6A, 2 in one, modular type power socket outlet with 16A switch (ISI marked) modular type and 1 No of 6A modular type sockets with 6A modular type (ISI marked) switch control with front cover plate on hot dip galvanized 20/18 SWG MS modular metal switch box with earthing terminal including all labour charges, giving all connections etc., complete with following configurations 1) 16A Socket - 1 No 2) 16A Switch - 1 No 3) 6A socket - 1 No. 4) 6A switch - 1 No Makes of Switches/Sockets:- Legrand (Arteor/Myrius) / Schneider (Clipsal X/ Livia AB)/ Crabtree Murano or Ducor/L&T-englaze/ GM-(Four-Five)/ Goldmedal(GIFA)/ Million (M-VEE)

Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part-I)/1554-I Makes: Torent / Universal / Unicab / Havells / KEI / Gloster/Finecab / Polycab /RR Kabel 3.5 core, 50 Sq.mm

Labour charges for run of U.G cables upto 50 sq.mm on wall with necessary fixing arrangments such as saddles, clamps etc., as directed by department including cost and conveyance of all materials etc., complete.

Supply and Installation of 125A FP, MCCB, 25KA on wall with suitable sheet steel enclosure with cable end boxes on angle iron frame work including all labour charges, massonry work etc complete with connections. Make: L&T- D sine / Schneider-CVS/ Legrand (DP X3/DRX)/ Siemens-3VL/ C&S-Winbreak.