Andhra Pradesh Medical Services And Infrastructure Development Corporation Tender

Supply and fixing of 15 mm dia. Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vaccum, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all mateials, taxes, transportation chrges, fixing charges and testing charges and all labour charges etc. comlete for finished item of work.

Supply and fixing of Line Pressure Gauge for Oxygen with ‘T’ adaptor along with necessary accessories

Supply and fixing of BPC flow Meter with Humidifier Bottle and L adapter near out let point, flow meter body made of brass material and should be back pressure compensated suitable for accurate gas flow measurement and control within a range of 0-13 litres per minute, flow tube and components should be made of clear impact resistant polycarbonate and Humidifier should have built in safety valve and should be made of unbreakable polycarboneate matrial and autoclavable at 134 degrees centigrade, including cost and conveyance of materials, errection charges, commissioning charges etc., for finished item of work

Supply and fixing of Copper Pipe Lines of 22 mm dia. 0.9 mm thick for distribution, pipes shall be half drawn, tempered, seamless,phosphorous deoxidized, non arsenic and dereased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2, including cost with Lloyd Test Certification and conveyance of pipes, necessary specials, made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges, including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work Make: Mexflow

Supply and fixing of Suction Jars of 600 ml Capacity at Outlet points with regulator and pressure pipe connections made of unbreakble poly carbonate material which is fully autoclavable at 134 degrees Centigrade including cost and convayance of all materials, errection, Commissioning charges and all labour charges charges etc. complete for finished item of work. Safety trap shall be provided inside the jar to safeguard the regulator from overflowing.The vacuum regulator shall be adjustable and have vacuum gauge which indicates suction supplied by the regulator. Product should be CE/BIS approved Manufacturer should be ISO 13485 certified.

Supply and fixing Gas Outlet Points for Oxygen / Air / Vaccum with S Brackets, self ceiling bross valves / din type outlets with nut and cap and it shuld be 100% self sealing type , so that at the time of removal of probe, it shuld stop gas flow automatically, out let shuld be single hand insertion, non inter changeable for specific gas, it should accept only correct medical gas adapter. with down tube of the specific gas should be brazed with brass bracket of the outlet, there after brass bracket should be fixed in wall with the help of the steel screw, with self sealing valve which should be screwed with the front portion of brass bracket and there after it should be covered by plastic cover duly colour coded as per specific gas, design of outlet should be such that it can be installed vertically on wall, horizontally on ICCU panel and also vertical to fit in pendants including cost and conveyance of all materials, errection charges, commissioning charges and all other labour charges etc, complete for finished item of work.

Sizes: 72"*36" Make:Cenflex with Rexine cloth , Combination: Solid Flexible PU Foam, Super-Soft Foam, PU+EPE Foam. Coir+Foam etc. Thickness: 2 Inch, 3 Inch, 4 Inch, 5 Inch, 6 Inches etc. Fabric Covers: ST Rexine Fabric Foam Density: 28 Density, 32 Density, 40 Density

Supply and fixing of 22 mm dia. Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc. Hg. Vaccum, Non Ferrous, Non Lubricated with 90 degrees turn, Hand lever operated of standard make of valves including cost and conveyance of all mateials, taxes, transportation chrges, fixing charges and testing charges and all labour charges etc. comlete for finished item of work.

Supply and fixing of Copper Pipe Lines of 15 mm dia. 0.9 mm thick for distribution, pipes shall be half drawn, tempered, seamless,phosphorous deoxidized, non arsenic and dereased confirming to BS 2871-1971 Part-1 (Table-X) and the chemical compositions shall be as per BS 6017 of 1981 table-2, including cost with Lloyd Test Certification and conveyance of pipes, necessary specials, made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges, including laying and jointing, testing, commissioning and all other labour charges etc. complete for finished item of work Make: Mexflow