Andhra Pradesh Industrial Infrastructure Corporation Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Industrial Infrastructure Corporation - APIIC Tender
Civil And Construction
Building Construction
Opening Date15 Feb 2024
Closing Date29 Feb 2024
Tender Amount₹ 76,38,926
Costs
EMD
₹ 77,000Document Cost
Refer DocumentsTender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
722654Bid Award Id
ViewTender No
43/CE-III/APIIC/2023-24, Dated:14.02.2024Tender Authority
Andhra Pradesh Industrial Infrastructure Corporation ViewPurchaser Address
-Website
http://https://www.apiic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of hindustan/Neycer or parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern parryware or equivalent with internal components and CP short bend and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated and 12.70mm dia. NP Bib tap 400 grams seiko or equivalent and angle stop cock complete including cost and conveyance of all materials to site, for finished item of work for all floors.
1
5892
5892.07
... More
Supply and laying of 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs etc., complete for entry of cable along road crossings/central median at a depth of 900.00 mm and at culvert crossings or wherever necessary including cost, conveyance of all accessories and labour charges etc., complete. [Makes: Tata/Zenith or approved equivalent]
6
5514
919
... More
RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering as directed by Engineer -In -Charge.
-
-
-
... More
Supply and fixing of CO2 type Fire Extinguishers 4.5 kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1.0 m discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warrant, including transportation, all taxes and all labour charges etc complete. [Makes: Safex/Kanex/Bharat/Reliance/NewTech]
3
36768
12256
... More
Supplying & fixing CI Nahany traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs complete for finished item of work in all floors as directed by the Engineer-In-Charge.
5
2158
431.74
... More
Acoustic Enclosure: Weatherproof, powder coated Acoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183. The doors are fabricated from 1.6 mm CRCA sheet packed with acoustic material, floor of MS chequered plate 5.0 mm thick, all doors/ opening are sealed with neoprene/ EPDN gaskets. The DG Set shall be maintained for two years after commissioning by the supplier including regular servicing, cost of consumables etc complete as specified by the OEM along with warranty for two years.
-
-
-
... More
Supplying & fixing Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete for finished item of work as directed by the Engineer-In-Charge
40
15088
377.2
... More
g) Lintels(RCC)
1
13144
13144.4
... More
Supply and erection of 60/63A, 4 pole, 415 V, 50 Hz Cubical type L.T heavy duty ON LOAD change over switch in sheet steel enclosure conforming to IS 13947-3-1993 with all accessories etc., complete on existing control panel. [Makes: L&T/Schneider/C&S/ABB/SIEMENS]
1
8844
8844
... More
Supply & fixing of Prince/sudhakar made or equivalent quality of PVC/SWR 110 dia pipe 6kg/cm2 including cost and conveyance of all materials to site and all labour charges to finished item of work.
-
-
-
... More
INTERNAL AND EXTERNAL ELECTRIFICATION
-
-
-
... More
Supplying and fixing of 25.4mm dia , 609.6mm long aluminium anodized towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges , for finished item of work as directed by the Engineer-In-Charge.
2
481
240.86
... More
Plastering 12 mm thick for INTERNAL WALLS in two coats, base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing including cost and conveyance of all materials like cement,sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing and all taxes etc., complete for finished item of work., as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904).
600
281544
469.24
... More
The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50°C. All controls for operation of DG set are from outside the enclosure with DG control panel having processor based genset monitoring and control system MCCB/ACB Ammeter, voltmeter, PF meter, frequency meter, KWH meter, Ind. Lamps etc., mounted inside enclosure, visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level is less than 75 db (A) at a distance of 1 Mtrs as per CPCB-II norms, complete in all respect of following capacity: [Engine Makes : Cummins/Koel Green/Sterling/mahindra/Elmot Power Gen/Ashok Leyland/Greaves; Alternator Makes : Stamford/ Kirloskar/CromptonGreaves/Leroysomer]
-
-
-
... More
Supply and fixing of Metal Enclosure as per IEC 61439-3, suitable for Flush Mounting and Surface Mounting, protection of appliances like AC/Geyser etc., with Neutral link, Plug and Socket (2P+E) and 1No. 10/20A-10kA SP MCB (C-Curve) including cost, conveyance and all materials and labour charges etc., complete. [Make: Legrand (Ekinox) : Cat no. 5078 11]
5
12420
2484
... More
d) Columns
8
103637
12954.67
... More
Wiring with 3 runs of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R.L.S flexible copper wires (ISI MARK) of 1100 V grade as per IS: 694/1990 & IS:17048/2018 as phase, neutral and earth in existing pipe with 6A/10A-1 Way-1 Module Modular Switch, 3 Plate Jumbo ceiling rose, and 8 Modular Horizontal/Vertical Cover plate (frame) covering to 8/9 module Hot dip Galvanized 18 SWG GI Module Switch Control box with earthing terminal, including cost, conveyance and labour charges etc., complete for light, fan and exhaust fan points in non residential buildings. [Cable makes: RR kabel/Havells/Polycab; Switches/GI Box/Frame makes: Legrand (Arteor/Myrius)/Schneider (Clipsal X/Livia AB)/Goldmedal (GIFA)]
50
58650
1173
... More
Supply of PVC 110 dia pipe for discharging of Terace rain water including cost and conveyance of all materials to site and all labour charges to finished item of work as directed by the Engineer-In-Charge.
50
16474
329.48
... More
and 40 kg Charcoal in layers of 150 mm height or 40 kg bentonite powder including all accessories like nuts bolts reducer, nipple, wire meshed G.I funnel and CC finished chamber of width: 320 mm, Length: 320 mm, Height: 192 mm, Weight 30 kg and load bearing Capacity: 5000 kg, covered with SMC-Fibre Reinforced Polymer (FRP) 5 Tons capacity manhole cover of size 300 X 300 mm, including cost, conveyance and labour charges etc., complete.
-
-
-
... More
Supply and run of the following ISI marked FRLS/FRLS-H/HFFR/ZHFR PVC insulated flexible copper cables of 1100 V grade as per IS: 694/1990 IS:17048/2018 Specifications for Phase, Neutral and Earth in existing PVC conduit for mains/circuit mains including labour charges etc., complete [Makes: RR kabel/Havells/Polycab/RR Kabel]
-
-
-
... More
Supply, laying, testing & commisioning of 4-pair, Cat-6 Solid (Third party ETL Intertek tested 600 MHz above) to support 1Gbps with Cross (+) filler pair seperator & PVC sheath 23 AWG, UTP Cable, Meets or exceeds ANSI/TIA- 568-C.2 and UL Listed & RoHS Compliant in the existing raceways / PVC conduits including making connections to information outlets and patch panels with ferruling at both ends for identifiation with necessary tools for punching, stripping, crimping and testing required etc complete. [Makes: Systimax /AMP/Panduit/ Siemond/ Molex/ Legrand]
150
7650
51
... More
Supply and laying of the following G.I wire Earth wire/Strip in horizontal/ Vertical run in Ground/ surface/Recess including, revitting, soldering, saddles, making connections etc., as required.
-
-
-
... More
1 m/3 ft. Patch Cord
10
2870
287
... More
Providing and fixing 30mm thick BRAND FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded “Rajshri” Prelam Pac ‘C’ channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ‘C’ channel using Pac solvent cement adhesive etc. complete as per direction of Engineer – in-charge, manufacture specification and drawing : Toilet door
2
6703
3351.64
... More
Supply and fixing of 6A/10A - 3/2 Pin 2 Module Modular Type Socket with Shutter Pin with 6A/10A -1 Way 1 Module Modular Switch mounted on 4 module Hot Dip galvanized 18 SWG Module metal box for Switch Board with earthing terminal and covered with an appropriate modular cover frame, including cost, conveyance and labour charges etc., complete. [Makes : Legrand (Arteor/Myrius)/Schneider (Clipsal X/Livia AB)/Goldmedal (GIFA)/Crabtree (Murano/Athena)]
6
2814
469
... More
Supply and fixing of Batten holder/Slanting holder in lieu of ceiling rose of light point with 7 W LED bulb (for new installation) with connections including cost, conveyance and labour charges etc., complete. [Holder makes: Gold Medal Olive/Anchor/Havells Reo; Lamp makes: Philips/Crompton/Havells]
6
1476
246
... More
NETWORKING
-
-
-
... More
Supply, transportation and laying of 16 Sq.mm x 4 Core XLPE insulated 1100 V grade Armoured Aluminium UG cable as per specification conforming to IS: 7098 (Part-I)/1554-I in existing G.I/HDPE pipe laid along the dug out cable trench including cost, conveyance, testing, and labour charges etc., complete. [Makes: Universal/Havells/KEI/Polycab]
50
12750
255
... More
g) Roof Beams
12
147160
12263.36
... More
Supply and fixing of 20 mm outer dia (1.40 -1.55) mm thickness MEDIUM grade PVC conduit pipe with IS:9537 Part-3 FRLS rigid PVC pipe (ISI Mark) concealed in wall/run on surface above false ceiling if necessary with all required accessories including chisiling the wall wherever necessary, masonry work for Light/Fans/exhaust fan points/call bell points and separate plug points & including all labour charges etc., complete. [Makes: Sudhakar/Precision/GM/Polycab/AKG]
300
30000
100
... More
SANITARY & WATER SUPPLY
-
-
-
... More
f)Stair case waist slab (150 mm Thk)
20
33861
1693.06
... More
Supplying and fixing of window size 1.6 X 1.4m with sal wood frame of size 75 X 100mm and sal wood shutters made with styles & rails of 100mm X 30mm thick with S/F of 4 nos MS hold fasts, 6nos MS TOWER BOLTS 100MM LONG, 9 NOS ms HINGES 100mm long, 2nos MS handles , 3nos window stays including all labour charges and fixing Iron Grill with Flats and square bars .
11
180045
16367.73
... More
Supply and installation of 1.0 Ton 5 Star capable of delivering 12000 BTU/hr and above, operating on refrigerant R-32/R 410A INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50 Hz, 1 Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4.0 m of 4 core copper flexible chord with cordless remote control, dual barrier coating in order to protect coil from oxidation and 5.0 kVA Stabilizer, MS bracket for fixing outdoor unit of Split AC unit etc., including cost, conveyance and labour charges etc., complete. [Makes: Daikin/LG/Llyod]
2
108834
54417
... More
e) Roof Slabs (125 m Thk)
260
387407
1490.03
... More
2 Runs of 6 Sq.mm (P, N) and 1 Run of 4 Sq.mm (E) copper cables
100
24900
249
... More
4 Runs of 10 Sq.mm (R, Y, B, N) and 1 x 6 Sq.mm (E) copper wire
50
29150
583
... More
(Rupees Seventy Six lakhs Thirty Eight thousand Nine hundred and Twenty Six Only)
-
-
-
... More
Supplying and fixing Indian make Wash Hand Basin (HSW/Parryware/Neyser)1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams seiko/senior/nice/Esso or equivalent complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 no.12.70mm dia. NP bib tap 400 Gms seiko or equivalent 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality and angle stop cock including cost and conveyance of all materials to site, labour charges , complete for finished item of work as directed by Engineer-In-Charge.
5
14139
2827.88
... More
25mm x 3mm GI Flat (0.656 kg/m)
10
620
62
... More
Supply and installation of 10W LED Bulkhead fitting with Pressure die cast Aluminum with opal diffuser with IP 65 protection etc., complete. [Makes : Philips/Bajaj/ Crompton/ Havells]
3
3531
1177
... More
Supply, Installation, Testing and Commissioning of 6 U (44 mm) Wall mounted Communication rack in two sections viz rear wall mount Section and hinged front section with glass doors, swing handles, lock, Top and Bottom Cable entries, supports for mounting rack on wall, Cable managers, Fan tray with 2 x 230 Volt fans, Equipment mounting hardware, wire managers, power supply box for supplying power to hubs, fans etc., along with earth continuity kit, MCB, indicator, moulded power supply cable, Blank panels, sliding shelves etc.., complete. [Makes: APW/HCL/Valrack/Netrack]
1
7090
7090
... More
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick masonary inspection chamber as per IS-4111:Part-1:1986 with cement mortar(1:6) prop using 2nd class clay bricks of 225mm thick approved source having a minimum crushing strength of 5 n/sq.mm including plastering with cement mortar 1:3 prop 1/2" thick both inside and outside fitted with 20"dia RCC manhole cover and frames including excavating pits upto a depth of 904mm (3'-0") in all sorts of soil (excluding rock) and laying cement concrete (1:4:8) 150mm thick using 40mm HBG metal and P.C.C 1:2:4 benching and channel 100mm thick as per standard specifications and including cost and conveyance of all materials like cement, sand,bricks,water etc., on all materials and all incidental and operational, labour charges like mixing cement mortar, construction masonary,lift charges,curing etc., complete for finished item of work as per standard specifications.
6
25829
4304.87
... More
Supply and fixing doors as per drawings with Sal wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 3 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top , 2 Nos. 150 mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc.,complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm) : Room door (1000mm x 2100mm)
15
50098
3339.92
... More
Supply, installation, testing and commissioning of 48" (1200 mm) Sweep Ceiling Fan with double ball bearings, air delivery more than 200 cubic meter/min etc., with 2 Module Modular type Electronic Step type Fan Regulator, Anchor fastener with fan hook/providing MS Fan hook with grouting and cement plastering, including cost, conveyance and labour charges for fixing ceiling fan, regulator and giving connections with 23/0060 Twin Core Twisted wire/flat heavy Copper wire etc., complete. [Makes : Crompton HS Plus/Havells ES PLUS/Orient Energy Star/Halonix (Zephyr); Regulator makes : Legrand (Myrius/Lyncus)/Schneider(Clipsal X/ Livia AB)/ Crabtree (Murano/Athena)/Gold Medal (GIFA)]]
10
35040
3504
... More
8 SWG G.I Wire (0.104 kg/m)
10
110
11
... More
2 Runs of 4 Sq.mm (P, N) and 1 Run of 2.5 Sq.mm (E) copper cables
150
26850
179
... More
Plastering 20 mm thick for EXTERNAL WALLS in two coats, base coat in CM (1:6), 16 mm thick and top coat in CM (1:4), 4mm thick with sponze finishing including cost and conveyance of all materials like cement,sand,water etc, to site all labour charges for mixing cement mortar finishing scaffolding curing etc., complete for finished item of work., as directed by Engineer-in-charge
400
197540
493.85
... More
Providing Brick masonry for superstructure of all thickness in CM(1:6) prop. Using Fly ash bricks of size 290x225x140mm obtained from approved source having crushing strength not less than 50kg/sqcm and water absorption not exceeding 20% by weight ,including cost, and conveyance of all materials like cement,sand, bricks, water etc., to site including all labour charges like mixing cement mortor,wall construction,scaffolding charges,curing etc., complete for finished item of work for all heights.
85
646502
7605.91
... More
Ornamental Plastering to Ceiling 12mm thick in single coat in CM(1:5) with dubara sponge finishing including cost and conveyance of all materials like cement, sand (screened), water etc., to site all materials and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing scaffolding,lift charges, curing including cutting grooves as directed by Engineer-in-charge etc., complete for finished item of work.
260
46891
180.35
... More
Painting walls with snowcem or other equal and approved water proof cement paint over priming coat,2 coats of approved brand and shade to give an even shade after thoroughly brushing the surface to nremove all dirt and remains of loose powdered materials including cost and conveyance of all materials to work site and all operations ,incidental,labour charges etc.., complete for finished item of work.(All colours) as directed by Engineer -In -Charge.
400
88332
220.83
... More
Supply, transportation and laying of double walled corrugated (DWC) 50 mm outer dia and inner dia 38 mm HDPE pipe having corrugation on the outer wall and plain surface inner wall conforming to BSEN-500 86/IS : 14930 Part - II along the cable trench dug out in soil for safeguarding UG cable with all accessories like couplers, bends, end caps, Tees etc., complete, including cost, conveyance, and labour charges etc., complete but, excluding charges for soil excavation and back filling charges. [Makes : DURA LINE (Dura Guard) or approved equivalent]
90
12330
137
... More
Filling with useful available excavated earth(Excluding rock) in trenches sides of foundation and basement with initial lead in layers not exceeding 15cm thick,consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges of T&P etc., complete for finished item of work as directed by Engineer -In -Charge.
160
5312
33.2
... More
Dadoing to walls with coloured glazed tiles of first quality of approved make and shade as directed by the Engineer in charge set over a base coat of CM(1:4) 12mm thick or jointed with cement mixed with the required quanitiy of colour pigment to match the shade of tiles including cost of all materials like tiles, cement, sand and water etc., including all labour charges, complete for finished item of work and as directed by Engineer -In -Charge.
40
24480
612.02
... More
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges etc., complete for finished item of work as directed by the Engineer-In-Charge.
2
2760
1380.42
... More
h) Sun Shades of 0.6 mtrs of avearage thick of 0.0625 mtrs
22
27413
1246.05
... More
Supplying and fixing NP soap dish heavy type with NP screws including cost and conveyance of all materialscomplete for finished item of work in all floors as directed by the Engineer-In-Charge.
2
556
278.36
... More
Pipe Clamp/Clips
15
289
19.31
... More
Supply, Installation, Testing and Comissioning of Rack mounted 19", Cat 6 UTP,1.5-1.6 MM CRS chasis, powder coated Modular Patch Panels 24 Port (upgradable to intelligent panels with use of sensor strips) with collapsible shutters on jacks to support latest ammendments of TIA / EIA Cat 6 Specifications in existing Communication Rack along with necessory connections of Cat 6 UTP Cables, With Rear Cable management trays and clamps. [Makes: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand]
1
8333
8333
... More
Y Bend
2
286
143.15
... More
Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x 315 mm with internal flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.70mm PVC connections with brass plumber unionnuts CP coated, 12.70mm push cock 1st quality of approved make, 31.75 mm dia PVC flexible pipe of 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work as directed by the Engineer-In-Charge.
3
12996
4332.14
... More
Supply, installation, testing and commissioning of 15 kVA at 0.8 pf 415V 50Hz 3-Ø Radiator Cooled and Turbocharged DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled. Alternator: It shall be self-regulated, self-excited and confirms to IS: 13364/1992 or latest version with regulation of +5% from No load to full load, IP23, with standard Alternator Protection (over voltage, over speed & under voltage).
1
386291
386291
... More
Supply and making one end termination with heavy duty single Compression Brass Gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminium lugs duly crimped with crimping tool, PVC tape etc., for 4 core x 16 Sq.mm/10 Sq.mm Armoured PVC insulated & PVC sheathed/XLPE Aluminium conductor cable of 1100 volt grade as required. [Makes: Dowells/Comet/SMI]
2
234
117
... More
Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminium lugs duly crimped with crimping tool, PVC tape etc., for 3.5 Core x 25 Sq.mm Armoured PVC insulated & PVC sheathed/XLPE Aluminium conductor cable of 1100 volt grade as required. [Makes: Dowells/Comet/SMI]
2
274
137
... More
Supply and fixing of 3 Nos. 6A/10 A - 3/2 Pin 2 Module Modular Socket with Shutter pin with 2 Nos. 6A/10A, 1 Way, 1 Module, Modular Switches mounted on 8/9 module Hot Dip galvanized 18 SWG Module metal box with earthing terminal and covered with an appropriate modular cover frame, including cost, conveyance and labour charges etc., complete. [Makes : Legrand (Arteor/Myrius)/Schneider (Clipsal X/Livia AB)/Goldmedal (GIFA)/Crabtree (Murano/Athena)]
10
11660
1166
... More
Supplying and fixing NP bib taps of size 12.70mm dia of Indian make Seiko or Equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors as directed by the Engineer-In-Charge.
4
1277
319.26
... More
Supply and fixing of 16A/6A 1 way Combi Modular Socket with shutter with 16A modular switch mounted on 3 module Hot Dip galvanized 18 SWG Module metal box for Switch Board with earthing terminal and covered with an appropriate modular cover frame, including cost, conveyance and labour charges etc., complete. [Makes: Legrand (Arteor/Myrius)/Schneider (Clipsal X/Livia AB)/Goldmedal (GIFA)/Crabtree (Murano/Athena)]
3
1965
655
... More
Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks complete for finished item of work as directed by the Engineer-In-charge.
1000
10790
10.79
... More
Providing independent earthing by excavating a pit to a depth of 2.1 m with 0.3 m dia in soil using 40 mm dia 'B' Class GI pipe as per IS 1239 (ISI mark) of 2.5 m length having staggered holes with tapered casting at the lower end, filling up the surrounding space around the pipe with Bentonite powder of 77 kg up to 1.8 m from the bottom and remaining space of the pit with loose earth and fixing hume pipe ring (3 mm Thick) with necessary accessories and proper connections including cost, conveyance of all materials, and labour charges etc., complete.
4
10756
2689
... More
Supply and run of 32 mm outer dia (1.90 - 2.10) mm thick ISI marked Medium grade with IS:9537-Part 3 rigid PVC Conduit concealed in wall/slab with all required accessories, including chisiling the wall wherever necessary, masonry work for Light/Fans/Exhaust fan points and Seperate plug points, including cost, conveyance and labour charges with all incidental expenses etc., complete. [Makes: Sudhakar/Precision/GM/Polycab/AKG]
200
23400
117
... More
CIVIL WORKS
-
-
-
... More
REFRIGERATION
-
-
-
... More
a) Column footings
20
204756
10237.81
... More
surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes) with luminaire performance complying to IS 10322 (Part 5/Sec-3) with warranty not less than two years etc., compatible for mounting on 1.5 m long 40 mm Nominal Bore GI pipe with light grade properties & weight as per IS 1239 ISI mark with suitable bent and MS Clamps for fixing luminaire on WALL, including cost of all materials, conveyance, labour and incidental charges etc., complete. [a) LUMINAIRE MAKES : Wipro (Skyline Plus)/Signify(City Star)/GE-Venture (Blue Hill-R1)/Crompton (Raptor Neo)/Kesslec; b) LED MAKES : PHILIPS LUMILEDS/CREE/NICHIA/ OSRAM/ SAMSUNG/LG; 3 Core x 1.5 Sq.mm Wire: Finolex/RR kabel/Polycab/Havells]
-
-
-
... More
Supply and installation of 1.5 Ton 3 Star capable of delivering 18000 BTU/hr and above, operating on refrigerant R-32/R 410A INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50 Hz, 1 Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3 mts of copper piping, insulation kit and 4.0 m of 4 core copper flexible chord with cordless remote control, dual barrier coating in order to protect coil from oxidation and 5.0 kVA Stabilizer, MS bracket for fixing outdoor unit of Split AC unit etc., including cost, conveyance and labour charges etc., complete. [Makes: Daikin/LG/Llyod]
3
180567
60189
... More
Diesel Engine: It shall have residential silencer, up to 10 M exhaust piping, electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank & piping, control panel (16 G) with SPN (For 5KVA)/TPN MCCB of required rating (25/36/50 KA) with PLC based Engine controller supplied by OEM, Ammeter, Voltmeter, Frequency Meter or Multi-function meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and Automatic Voltage Regulator. The diesel engine shall be capable of providing 10% overload for 1 Hr for every 11 Hrs of continuous running at full load. The DG set shall be supplied with initial filling of fuel, lube oil, coolant oil as per OEM specifications and shall be tested at site.
-
-
-
... More
Supply, fitting and placing TMT bar reinforcement (Fe 415) including decoiling, bending, cracking and tying them after placing in position as directed by the Engineer-In-Charge including cost and conveyance of steel and binding wire labour charges for all operations etc complete for finished item of work as directed by the Engineer in Charge and as per technical specification 1160 & 1600 Morth.
30
2567858
85595.27
... More
Door Bends
2
227
113.62
... More
Providing Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 402) and as directed by the Engineer-in-charge
35
182847
5224.21
... More
Excavation of earth for a trench of size 0.3 m (Width) x 0.9 m (Depth) x 1.0 m (Length) in soil for laying HDPE pipe and refilling the trench with excavated soil to original position, including cost, conveyance, and labour charges etc., complete.
100
11800
118
... More
Providing 2 runs of 1/2" x 1/4" Copper tubes for suction and liquid between indoor and outdoor unit for Split/Cassette Air- Conditioner including foaming etc., complete.
10
11130
1113
... More
Supply & fixing of Prince/sudhakar made or equivalent quality of PVC/SWR 110 dia pipe 6kg/cm2 including cost and conveyance of all materials to site and all labour charges to finished item of work as directed by the Engineer-In-Charge.
20
6392
319.64
... More
Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & cost. brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of including labour charges for fixing and laying the SWG Junctions/Plugs/bends of any dia with air tight cement joints as per standard junctions complete for finished item of work as directed by the Engineer-In-Charge.
2
1161
580.57
... More
FIRE FIGHTING
-
-
-
... More
c) Plinth Beams
10
126237
12623.73
... More
Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm including cost and conveyance of all materials, complete for finished item of work in all floors as directed by the Engineer-In-Charge.
5
3601
720.32
... More
Supply and run of 25 mm outer dia (1.60 - 1.80) mm thick ISI marked Medium grade with IS:9537-Part 3 rigid PVC Conduit concealed in wall/slab with all required accessories, including chisiling the wall wherever necessary, masonry work for Light/Fans/Exhaust fan points and Seperate plug points, including cost, conveyance and labour charges with all incidental expenses etc., complete. [Makes: Sudhakar/Precision/GM/Polycab/AKG]
600
67200
112
... More
Supply and fixing of 6A/10A - 3/2 Pin 2 Module Modular Type Socket with Shutter Pin with 6A/10A -1 Way 1 Module Modular Switch on a Common Switch board, including cost, conveyance and labour charges etc., complete. [Makes : Legrand (Arteor/Myrius)/Schneider (Clipsal X/Livia AB)/Goldmedal (GIFA)/Crabtree (Murano/Athena)]
8
2616
327
... More
Supply and fixing of "Sheet Moulding Compound (SMC) Box" with min. internal dimensions of 700 mm [H] x 480 mm [W] x 215 mm [D], single hinged door fixed to base with hinges incorporating 3 nos. 100A/415V Porcelain re-wirable fuse units, and Brass Neutral link mounted on plywood, wired with 6 Sq.mm FRLS PVC insulated 1.1 kV grade copper wire with necessary locking arrangments, riveting the SMC box on wall including cost, conveyance of all materials, and labour charges etc., complete. [Makes:- SMC Box : Sintex: GSJB 7450/Sadhrish SRJB 8060]
1
8387
8387
... More
Earth work excavation for foundations and depositing on bank for all leads & lifts including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc incl all taxes expect GST complete for finished item of work including dewatering charges etc as per SS - 20 B (APSS 308).and as directed by the Engineer-in-charge
140
11803
84.31
... More
Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls as directed by Engineer -In -Charge.
600
80724
134.54
... More
Flooring with Non-skid Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of first quality of make set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid including neat cement slurry of honey like consistency spread at the rate of 3.3 kgs per Sqm. and filling the joints with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site, (excluding cost of C.C. bed) including cost of on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge curing etc., complete for finished item of work in all floors. (APSS No.701 & 707)
10
9904
990.47
... More
Painting two coats with synthetic enamel paint first grade to new wood work including cost and conveyance of all materials to site, incidental, operational and all labour charges etc., complete for finished item of work as directed by Engineer -In -Charge.
50
9211
184.22
... More
Supply, installation, testing & commisioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 Nos. of RJ-45 connectors with strain relief boots Compatible to T568A, T568B specifications including making connections to information outlets. [Make: Systimax /AMP/ Panduit/ Siemond/ Molex/Legrand]
-
-
-
... More
No. of BOQ items: 80(Eighty) only
-
7638925
-
... More
Plain Bends
6
524
87.48
... More
Vent Cowl
3
61
20.45
... More
b) Column Pedastals
2
21473
10736.58
... More
Supply and fixing of 4 Way TPN Distribution board with IP-43 protection (Metal Door) suitable for 63 A, 10 kA FP MCB (C-Curve) as Incomer and 12 Nos. 6 to 32 A range 10 kA SP MCBs (C-Curve) as outgoers as per IS 8623; IS 13032; IEC 61439-3 including cost, conveyance and labour charges for surface/flush mounting with internal connections etc., complete. [Makes: Legrand (Ekinox 3)/Schneider-Acti9/Hager-Novello+/Seimens/L&T-Newrange]
1
11023
11023
... More
Providing independent earthing as per IS 3043 with Copper earth plate of size 600 mm (L) x 600 mm (B) x 3.15 mm (Thick) by embodying 3.0 m to 4.0 m below the ground level with 40 mm dia 'B' Class G.I Pipe with staggered holes and tapered bottom by excavating a pit to a depth of 3 to 4 m in all soils for Sophisticated Electronic equipment as per National Electric Code and earth connection from electrode Copper strip of 25 mm x 5 mm of 200 mm length to be bolted with nut bolts to G.I. pipe including 25 mm x 3 mm copper strip of 6.0 m length connected from plate to Copper strip including filling with 20 kg Salt
2
41004
20502
... More
Flooring with vitrified tiles of 1st quality of size 600x600 and 8mm-10mm thick glossy finish permium colours, set cover base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work and as directed by Engineer -In -Charge.
230
295846
1286.29
... More
Supply, transportation and laying of 3.5 core 25 Sq.mm XLPE insulated, 1100V grade armoured UG Aluminium cable as per specification confirming to IS : 7098 (Part-I)/1554-I including all labour charges for laying the cable in DWC HDPE pipe etc., complete. [Makes: Universal/Havells/KEI/Polycab]
60
18420
307
... More
Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work.
20
18996
949.82
... More
Reinforced brick masonry with half brick walls in CM (1:4) using solid cement flyash brick of 290x112x140mm size of approved make having crushing strength of not less than 50Kg/Sqcm and water absorption not exceeding 20% by weight and placing 2nos of 6mm MS roads in every 3rd layer including cost and conveyance of all materials like cement sand bricks water etc., to site, and all incidental and operationalcharges, labour charges like mixing cement mortar, construction of wall, scaffolding charges, curing, all taxes, etc., complete for finished item of work, but excluding cost of steel and as directed by Engineer -In -Charge.
30
228582
7619.42
... More
2 m/ 7ft. patch cord
6
2034
339
... More
Supply, installation, testing and commissioning of 60 W rated power (max.) LED Street light luminaire with housing fabricated from Pressure die cast or extruded Aluminium with a grey paint/powder coating, an extra clear toughened glass/PC diffuser, Mech. impact resistance IK ≥ 07 [2 J reinforced], Conforming to IP66 [Dust penetration-protected, jet-proof], Protection class IEC : Safety Class-I, High power LEDs with Secondary optic lens achieving overall system efficacy 120 lm/W @ CCT 5700 K (ANSI), CRI (Ra) ≥ 70, Junction temp. 70 deg. C, Optic Type Outdoor : Distribution Symmetric Wide, Beam angle of light source: 120 Degrees, Luminaire light beam spread 130° x 88°, lifetime residual flux of 70% (L70) @ 50,000 burning hours at Ta = 30 deg. C, powered by BIS certified Potted (Constant Current) Driver having efficiency 90%, input voltage : 120 V-270 V AC, freq.: 50/60 Hz, P.F 0.9, T.H.D 10% at 110 V AC, internal surge protection of 4/4 kV and an additional
6
41604
6934
... More
Gronolithic Concrete Flooring 50 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal, sand and water etc., complete for finished item of work.
35
14294
408.42
... More
Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia. first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges etc., complete for finished item of work.
1
5133
5133.13
... More
Supply and fixing of 18-20W, not less than 1100 mm length LED batten light with extruded Aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy 120 lumens/watt , PF 0.9, Surge protection: 2KV, THD 15%, with inbuilt driver and frosted cover CCT: 5700 K, minimum CRI 70, etc., complete with earth connection and not less than two years warranty. a) LUMINAIRE MAKES : Philips/GE-Venture/Crompton/Wipro/Havells; LED Makes: PHILIPS LUMILEDS/CREE/NICHIA/OSRAM/ SAMSUNG/Everlight]
28
21056
752
... More
Supply and fixing doors as per drawings with Sal Wood frame of section 100mm x 65 mm and ISI marked flush door shutters of 30 mm thick double shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150 mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1500mm x 2100mm) Main door (1500mm x 2100mm)
7
22582
3226.03
... More
Providing skirting to internal walls to 15 cm height with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,complete for finished item of work.(APSS No.701 &707) as directed by Engineer -In -Charge.
26
33082
1272.42
... More
Supply, Installation, testing and Commissioning of 12-Way SPN Horizontal DB with IP43 Protection (Metal Door) suitable for installation of 1 No. 40 A, 10 kA, Double Pole MCB (C-Curve) as Incomer, and 10 Nos. 6-32 A range, 10 kA SP MCBs (C-Curve) as Outgoers as per IS 8623; IS 13032; IEC 61439-3 including cost, conveyance and labour charges for surface/flush mounting with internal connections etc., complete. [Makes: Legrand (Ekinox 3)/Schneider-Acti9/Hager-Novello+/Seimens/L&T-Newrange]
2
14738
7369
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements