Andhra Pradesh Industrial Infrastructure Corporation Tender

Supply, fabrication, transportation and erection of single section hot dip galvanized continuously tapered 7.5 m long Octagonal Pole with BSEN-10025 grade S 355 JO steel plate for shaft (3 mm thick) having bottom dia. of 130 mm A/F and top dia. 70 mm A/F, Steel plate conforming to IS 2062 for base plate of size 220 mm (L) x 220 mm (B) x 12 mm (T) welded to bottom of the pole with camouflaged junction box having reinforced and weather proof door with opening arrangements, suitable to withstand wind speed of 180 kmph along with fixing 1.0 m long single arm bracket fabricated from MS galvanized pipe of 40 mm dia (NB) including excavation of pit in soil to a depth of 1.0 m for casting M 20 grade vibrated cement concrete pedestal of size 0.45 m (Length) x 0.45 m (Breadth) x 1.2 m (Height) with HYSD steel reinforcement of weighing around 10 kg bearing 8 nos. of 10 mm dia rods (Main Bars Column) and 8 nos. of 8 mm dia stirrups duly embedded with 4 nos. of M 20 x 700 mm long 'J' type Anchor bolts (EN 8 grade), and suitable HDPE/PVC pipe for entry and exit of UG cable, curing for 7 days, fixing 6A-10 kA-SP MCB, 63A-500 V-4 Way Bakelite power block connector etc., mounted on 3 mm thick Bakelite Sheet fixed inside junction box and labour charges for erection of pole on pedestal with M 20 nuts and M 20 plane washers, providing coil earthing, maintaining pole number and circuit number on pole etc., as directed by field engineers during execution for finished item of work, including cost of all materials, conveyance to site, centring, hire and operational charges of all T&P, labour for fabrication and other operations etc., complete. [Octagonal pole makes: Bajaj /Valmont/Transrail/ Skipper/Consoul]

Supply, fabrication, transportation and erection of single section hot dip galvanized continuously tapered 5 m long Octagonal Pole with BSEN-10025 grade S 355 JO steel plate for shaft (3 mm thick) having bottom dia. of 130 mm A/F and top dia. 70 mm A/F, Steel plate conforming to IS 2062 for base plate of size 200 mm (L) x 200 mm (B) x 12 mm (T) welded to bottom of the pole with camouflaged junction box having reinforced and weather proof door with opening arrangements, suitable to withstand wind speed of 180 kmph along with fixing 1.00 m long single arm bracket fabricated from MS galvanized pipe of 40 mm dia (NB) with 10 degrees tilt including excavation of pit in soil to a depth of 1000 mm for casting M 20 grade vibrated cement concrete pedestal of size 450 mm (Length) x 450 mm (Breadth) x 1200 mm (Height) with HYSD steel reinforcement of weighing around 10 kg bearing 8 nos. of 10 mm dia rods (Main Bars Column) and 8 nos. of 8 mm dia (stirrups) duly embedded with 4 nos. of M 16 x 650 mm long 'J' type Anchor bolts (EN 8 grade), and suitable HDPE/PVC pipe for entry of UG cable, curing for 7 days, fixing 6A-10 kA-SP MCB, 63A-500 V-4 Way Bakelite power block connector etc., mounted on 3 mm thick Bakelite Sheet fixed inside junction box and labour charges for erection of pole on pedestal with M 16 nuts and M 16 plane washers, providing coil earthing, maintaining pole number and circuit number on pole etc., as directed by field engineers during execution for finished item of work, including cost of all materials, conveyance to site, centring, hire and operational charges of all T&P, labour for fabrication and other operations etc., complete. [Octagonal pole makes: Valmont/Laasma/Consoul]]

Supply, installation, testing and commissioning of 60 W rated LED Street light luminaire with housing fabricated from Pressure die cast or extruded Aluminium with a grey paint/powder coating, an extra clear toughened glass conforming to IP 66, High power LED's with Secondary optic lens achieving system luminous flux 6000 lm @ CCT of 5700 K/3000 K (ANSI), CRI (Ra) ≥ 70, Junction temp. 70 deg. C, lifetime residual flux of 70% (L70) @ 50,000 burning hours at Ta = 35 deg. C, powered by Potted (Constant Current) Driver having efficiency 90%, input voltage : 120 V-270 V AC, freq.: 50/60 Hz, P.F 0.9, T.H.D 10%, built-in 4 kV (min.) surge protection (in DM and CM) and 10 kV external surge protector (in DM and CM) with luminaire performance complying to IS 10322 (Part 5/Sec-3) etc., compatible for mounting on pole with bracket outer dia of 50 mm along with run of PVC insulated 3 Core x 2.5 Sq.mm Sheathed flexible copper cable of 1.1 kV grade as per IS 694/1990 for ext. of supply with connections as required, including cost of all materials, conveyance, labour and all incidental charges. [Luminaire makes:Wipro(Skyline) / Philips (Green line) / GE-Venture / Crompton(Neo Series) / Bajaj (Edge) / Halonix(Lumos - Super) / Havells (Endura Series) /Keselec ; LED makes: PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG]; 3 x 1.5 Sq.mm sheathed flexible Copper cable makes : Finolex/Polycab/Havells]