Andhra Pradesh Industrial Infrastructure Corporation Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Industrial Infrastructure Corporation - APIIC Tender
Civil And Construction
Civil Works Others
Opening Date27 Dec 2023
Closing Date10 Jan 2024
Tender Amount₹ 6,39,85,223
Costs
EMD
₹ 6,40,000Document Cost
Refer DocumentsTender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
704295Bid Award Id
ViewTender No
35/CE(N)/APIIC/2023-24, Dated:22.12.2023Tender Authority
Andhra Pradesh Industrial Infrastructure Corporation ViewPurchaser Address
-Website
http://https://www.apiic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit, all taxes except GST complete for fnished item of work (APSS NO.309 & 310)
597.5
111768
187.06
Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310) - Filling with Murum
541.93
263247
485.76
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement,fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work. (APSS No. 402)
44.66
227104
5085.18
Providing Antitermite treatment as per BIS - IS 6313 (Part 2) 2013 code specification (Pre-constructional chemical tretament measures) & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry lmidacloprid 30.5% SC ((IS63131) dissolve 2.1 Ml/1 litre of water and apply emulsion / solution @ 7.5 litres /sqm of internal and external verticle surface of the columns, plinth beams (back filling) walls and floor junction, external perimeters along retaining wall @ 5 litres / sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (plinth) and @ 2.0 litres / line metre at expansion joints. The substructure of a depth of 500 mm around columns & 300 mm deep around plinth beams, basement & floor filling area including excavation channel along the wall & rodding, etc., cost and conveyance of all materials to the Site, cost of labour for spraying, rodding, etc., complete for finished item of work as per the approval of the Engineer-in-Charge (plinth area measurements will be taken for measurements). BMT-H. 66
525.68
102728
195.42
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement,fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work. (APSS No. 402)
-
-
-
Footings
32.08
163132
5085.18
base ment
179.95
915078
5085.18
Construction of RR masonry in CM (1:6) proportion using OTG stone from approved quarry including cost and conveyence of all materials like cement, sand, water, garnite stone, etc., including labour, mixing of cement mortar construction, scaffolding charges, etc., complete for finished item of work except GST and Seneiorage charges.
205.06
1015510
4952.26
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, except GST and Seneiorage charges complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
a) Footings
104.98
1137041
10831.03
b) Column Pedastals
34.99
399207
11409.2
c) Plinth Beam
59.14
792862
13406.54
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, except GST and Seneiorage charges complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
Columns
-
-
-
Ground Floor
30.98
431778
13937.32
First Floor
30.98
441774
14260
Second Floor
30.98
452791
14615.61
Staircase Headroom Portion
3.24
47354
14615.61
Lintels
-
-
-
Ground Floor
3.84
53714
13988.05
First Floor
3.92
55734
14217.87
Second Floor
3.92
56725
14470.67
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials , centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903), Except GST and Seneiorage charges etc., for Chajja / Sunshade
-
-
-
Sunshade
-
-
-
Ground Floor
27
39645
1468.35
First Floor
28
41545
1483.78
Second Floor
28
42561
1520.07
Plastered band with 15mm thick with width 10 cm moulded cement mortar band in CM(1:4) (1 Cement:4 Sand) upto 100mm in width raised band including cost and conveyance of all materials like cement, sand , water etc. and all operational, incidental charges on materials & including cost of all labour charges for mixing mortar, finishing, scafollding, lift charges, curing including cutting as directed by the Engineer-in-Charge etc., complete for finished item of work of all heights (SS 901,903,904). Except GST and Seneiorage charges etc.
2.9
427
147.27
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Except GST and Seneiorage charges etc.
-
-
-
Beams
-
-
-
Ground Floor
54.98
678562
12341.98
First Floor
53.25
668394
12552
Staircase Headroom Portion
4.32
54224
12552
Second Floor
53.25
683956
12844.25
Staircase Headroom Portion
4.32
56752
13137.25
RCC Slabs - 125 mm Thick
-
-
-
Ground Floor
1175.52
2140469
1820.87
First Floor
1135.03
2096547
1847.13
Staircase Headroom Portion
70.13
129539
1847.13
Second Floor
1135.03
2135922
1881.82
Staircase Headroom Portion
70.13
131972
1881.82
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
119.28
10633547
89147.78
Painting with two coats of synthetic enamel paint of first garde for new iron works including cost and conveyance of all materials to Site, incidnetal, operational and labour charges complete for finished item of work.
239.04
19983
83.6
Painting with two coats of synthetic enamel paint of first garde for new iron works including cost and conveyance of all materials to Site, incidnetal, operational and labour charges complete for finished item of work.
239.04
35052
146.64
Supplying and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks,EPDM gasket, wool pile, zinc alloy (white)Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels)made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm). including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. Except GST.
174.3
1782278
10225.35
Brick Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes except GST on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes except GST for finished item of work. (APSS No. 501 & 504).
-
-
-
Ground Floor
354.73
2707952
7633.84
First Floor
369.38
3126487
8464.15
Seocnd Floor
369.38
3216782
8708.6
Terrace
52.9
473754
8955.66
Brick Masonry for partition walls 0f 11.5 cm thick for superstructure in CM (1:3) prop. (Cement : Screened sand) using second class traditional size bricks as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm including cost and conveyance of all materials, labour and all operations for constructing half brick masonry, mixing cement mortar, curing, etc., complete for finished item of work. Except GST.
-
-
-
Ground Floor
155.45
208410
1340.69
First Floor
155.45
268598
1727.88
Seocnd Floor
155.45
280263
1802.92
Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls.
-
-
-
Ground Floor
1732
916383
529.09
First Floor
1797
1057211
588.32
Seocnd Floor
1797
1074390
597.88
Terrace
235.11
142923
607.9
Plastering 12 mm thick to Internal surfaces of masonry walls in two coats with base coat of 8 mm thick in CM (1:5) and top coat of 4 mm thick CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work for Internal Walls
-
-
-
Ground Floor
1732
891893
514.95
First Floor
1797
1031819
574.19
Seocnd Floor
1797
1048980
583.74
Terrace
235.11
139598
593.76
Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler y putty knife / muslin pad, air dry for 2 -3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls
-
-
-
Ground Floor
1732
395173
228.16
First Floor
1797
432555
240.71
Seocnd Floor
1797
441307
245.58
Terrace
235.11
58885
250.46
Providing and applying wall putty of white cement or polymer or cement based of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty / texure paint filler by putty nife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work for External walls.
-
-
-
Ground Floor
1732
721100
416.34
First Floor
1797
770697
428.88
Seocnd Floor
1797
779466
433.76
Terrace
235.11
103126
438.63
Painting to ceiling with one coat of cement paint of approved brand and shade over a base coat of approved cement primer grade making 2 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labor charges and incidental such as scaffolding lift charges etc., and overheads and contract profit complete for finished item of work including conveyance of all materials in all floors.
-
-
-
Ground Floor
1175.52
161316
137.23
First Floor
1135.03
155760
137.23
Seocnd Floor
1135.03
155760
137.23
Staircase Headroom Portion
70.13
9623
137.23
Ceiling plastering single coat in CM (1:4) 8 mm thick including cost and conveyance of all materials like cement , sand water etc., to site including sales and other taxes on all materials, and all operational incidental charges on materials and including cost of all labour charges for mixing mortar, finishing curing as directed by Engineer - In - Charge etc., and overheads & contractors profit complete for finished item of work (SS 901, 903 & 904)
-
-
-
Ground Floor
1175.52
180794
153.8
First Floor
1135.03
228492
201.31
Seocnd Floor
1135.03
240694
212.06
Painting two coats to newly plastered external walls with acrylic exterior emulsion paint having VOC (volatile Organic Compound) content less than 50 grams/liter of approved colour and brand over a primary coat (total 3 coats) including cost and conveyance of all materials like acrylic exterior emulsion paint to site including cost of brushed scaffolding charges lift charges and labour charges such as preprinting the wall applying three coats of plastic emulsion etc., complete for finished item of work (APSS No. 910,911 & 1201) Note all paints should be with low emitting materials with conform to LEED criteria.
5561.11
647591
116.45
Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls.
9077.3
2335952
257.34
Providing and laying Vacuum dewatered flooring of 50mm thick with M20 Design Mix Cement concrete minimum 330kgs of cement laid in alternate panels to line & grade as per drawings and directions including shuttering machine mixing laying, compacting, vacuum dewatering and curing, using of coarse aggregate and find aggregate in specified proportion vibrating and finishing with a neat cement float finish on top and dewatering using vacuum dewatering machine curing etc., complete for finished item of work for flooring for parking.
-
-
-
Ground Floor
708.48
500732
706.77
First Floor
691.2
488519
706.77
Seocnd Floor
691.2
488519
706.77
Flooring with polished Granite (Tandur) 15 to 18 mm thick set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost of all materials complete for finished item of work.
-
-
-
Ground Floor
436.98
318728
729.39
First Floor
436.98
318728
729.39
Seocnd Floor
436.98
318728
729.39
Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.
-
-
-
Ground Floor
39.79
41718
1048.46
First Floor
39.79
41718
1048.46
Seocnd Floor
39.79
41718
1048.46
Providing dadooing to walls with glazed plain coloured wall tiles 1st quality of size not less than 300mm X 200mm with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) 12mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractor profit complete for finished item of work.
-
-
-
Ground Floor
74.68
64667
865.93
First Floor
74.68
64667
865.93
Seocnd Floor
74.68
64667
865.93
Providing impervious coat to exposed RCC roof slab and surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903).
70.13
39760
566.96
Supply and fixing of doors as per approved drawings with 2nd class teak wood frame of section 125mm x 75 mm ISI marked flush door shutter of 40mm thick single shutters with bond wood solid block board type Core having cr bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory m conforming to IS 2202-1991 (Part-1) both sides commercial ply with internal lipping on all sides and fixed with 4mm th veneer finish both sides including cost and conveyance to site of teak wood frame, flush shutter including supply fixing 4nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 4Nos brass hinges 150mm long, 2Nos. brass tower bolt of 300 mm x 12 mm dia at top & bottam, 1 Nos heavy duty door stopp Heavy duty mortise lock 6/7 levers with brass heavy handles including fixing the fixtures to door with required numbe screws, bolt and nuts including Melamine polish & labour charges for fixing the frame in position, fixing the shutter to frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded
45
387590
8613.13
Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles,and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side,and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Paneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specific (Output 1.725 SQM)
56.93
191352
3361.19
Providing, supplying & fixing of Top hung Ventilator Double openable ventilator shutter window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame section size of 100 x 45mm, Glazed and flymesh shutter frame section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
14.04
127708
9096.02
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including costof hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec:1108
180
882243
4901.35
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & ase support for tanks
40000
386400
9.66
STAIRCASE
-
-
-
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Except GST and Seneiorage charges etc.
-
-
-
Waist Slab 0f 175 mm thick
-
-
-
Ground Floor
45.49
99058
2177.58
First Floor
45.49
100730
2214.34
Second Floor
45.49
102417
2251.42
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
2.92
260311
89147.78
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Except GST and Seneiorage charges etc.
-
-
-
Ground Floor (Beams)
0.46
5677
12341.98
First Floor (Beams)
0.46
5773
12552
Second Floor (Beams)
0.46
5908
12844.25
Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length upto 2.43 mts set over base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges,Machine cutting charges, half rounding the edges of treads , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special)
-
-
-
Treads of 0.30m wide:
-
-
-
Ground Floor
44.96
241746
5376.92
First Floor
47
252715
5376.92
Second Floor
44.96
241746
5376.92
Risers of 0.15 m height:
-
-
-
Ground Floor
23.97
90997
3796.32
First Floor
23.97
90997
3796.32
Second Floor
23.97
90997
3796.32
Supplying and fixing of stainless steel (Grade 304) hand railing, Balustrade, etc., handrailing at 90 cm heigh as per approved drawing with top rail of 32mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit,for finished item of work.
-
-
-
Ground Floor
196
1179678
6018.77
First Floor
196
1179678
6018.77
Second Floor
196
1179678
6018.77
SEPTIC TANK
-
-
-
Earth work excavation for foundations for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding dewatering charges etc., as per SS 20B (APSS 308). for Ordinary Soil - Mechanical Means
32.08
4077
127.1
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement,fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work. (APSS No. 402)
0.44
2237
5085.18
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Except GST and Seneiorage charges etc.
-
-
-
Bottom Slab 300 mm thick
4.6
13920
3026.12
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } , coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)
-
-
-
Side Wall 300 mm thick
18
85918
4773.25
Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Except GST and Seneiorage charges etc.
-
-
-
Top Slab 200 mm thick
4.6
10797
2347.29
Roof Beam
0.46
5677
12341.98
Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)
1.38
123023
89147.78
Providing impervious coat to exposed RCC roof slab and surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903).
5
2834
566.96
Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310) - Filling with Murum
21.22
10307
485.76
WATER SUPPLY & SANITARY
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) of Jaquar/ equivalent type with 100mm sand cast iron P or S trap, Dual flush low level white flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :(data approved sl.no1 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
20
90892
4544.6
Supplying and fixing Indian make Wash Basin jaquar/ equavalent make 1st quality conforming to IS:2556-Part-4:1972 of 560 x 430 x 185mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make heavy duty complete with standard CI brackets including wooden blocks ,1 No.12.70mm PVC connection with brass union nuts CP coated , angle stop cock 12.70mm dia. first quality Indian make heavy duty, 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work CNS-WHT-811(data approved sl.no.3 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
20
51513
2575.65
Supplying and fixing of stainless steel sink of size 914.4 mm x457.2mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces overheads & contractors profit complete.for finished item of work in all floors.(data approved sl.no.4 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
20
163038
8151.9
Providing and fixing of liquid soap container NP metallic with NP brackets and screws.(data approved sl.no.5 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
20
5366
268.3
Supplying and fixing white glazed urinals of size 345mm x 355 mm x 535 mm with Senotronic sens Flushing Valve for urinal with Complete kit (SNR-STL-51083)integral flushing rim fixed with screws complete Indian make jaquar/Equivalent) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.URS-WHT-13261(data approved sl.no.6 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
5
61721
12344.3
Supplying and fixing of 8mm thick Toughned glass partitioins of size 4' 0" x 2' 0"with etching the glass including fixing at site for urinals including full rounding the edges , fixing in position, , including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.(data approved sl.no.53 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
5
13097
2619.45
Providing and fixing UPVC) Rain Water Pipe 4985 , 10kg/sq.cm with one end plain and other and socketed with injection moulded / hopper connect to gutter fabrication/ Fittings such as tees, bends, doors, cleanout plug jointing and provided with square grooved and alongwith 'V' shaped rubber ring including making the wall and flooring wherever necessary. The wall thickness of the and other technical characteristics shall be conforming to IS: 4985'. The jointing to be completed with rubber lubricant.
-
-
-
75mm dia
30
7227
240.9
110 mm dia
25
12782
511.3
160mm dia
30
32484
1082.8
200mm dia
25
42180
1687.2
32 mm dia
30
1500
50
40 mm dia
25
1903
76.15
50 mm dia
25
2955
118.2
Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.(data approved sl.no.37 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
1
6950
6950.97
Supplying and fixing of 3" (76.2mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.(data approved sl.no.40 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
33
3498
106
Providing and fixing soap dish Jaquar make Continental series, Chrome Finish with 7 years warranty(data approved sl.no.44 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
33
46828
1419.05
S & F CP Short body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make
33
21821
661.25
Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.(data approved sl.no.50 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
-
-
-
15.90mm OD pipe BMW-I.220
30
2010
67.03
22.20mm OD pipe BMW-I.221
30
3204
106.8
28.60mm OD pipe BMW-I.222
30
7294
243.14
41.30mm OD pipe BMW-I.224
30
10054
335.16
54.00mm OD pipe BMW-I.225
30
16530
551.03
Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work.(data approved sl.no.12 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
-
-
-
15mm Nominal bore
10
6862
686.25
20mm Nominal bore BMW-F.19,20
10
9226
922.6
25mm Nominal bore BMW-F.17,18
10
13236
1323.65
40mm Nominal bore BMW-F.25,26
10
27143
2714.3
50mm Nominal bore BMW-F.27,28
10
39743
3974.3
65mm Nominal bore BMW-F.29,30
10
61329
6132.95
80mm Nominal bore BMW-F.31,32
10
90835
9083.55
Supplying & fixing GI pipe Medium Grade properties & weight as per IS 1239 ISI mark in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.(data approved sl.no.13. for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
-
-
-
15mm Nominal Pipe BMW-F.79,80
30
6783
226.1
20mm Nominal Pipe BMW-F.81,82
30
7500
250
25mm Nominal Pipe BMW-F.83,84
30
9748
324.95
32mm Nominal Pipe BMW-F.85,86
30
13566
452.2
40mm Nominal Pipe BMW-F.87,88
30
15135
504.5
50mm Nominal Pipe BMW-F.89,90
30
16497
549.9
65mm Nominal Pipe BMW-F.91
30
28530
951
Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0" for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.(data approved sl.no.52 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
8
18606
2325.85
Supplying and fixing of 101.60mm x 609.60mm white glazed porcelain channels 1st quality fixed in brick masonry to the required slopes , white cement pointing including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.(data approved sl.no.54 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
8
7783
972.89
Construction of brick masonry support for GI pipe of size 304.80mm x 228.60mm x 228.60 mm in CM (1:8) prop including plastering and finishing with 12mm thick in CM (1:5) including cost and conveyance of all materials and all labour charges, overheads & contractors profit complete for finished item of work for all floors.(data approved sl.no.55 for sanctioned estimate of construction of millenium tower -A at plot no 16 & 17 AT Hill no.03 of Madhurawada, visakhaptnam districtvide CR No.01/CE-II/APIIC/2016-17 dt:04.4.2016
1
86
86.35
Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook of Jaquar make queen series with 7 years warranty Chrome plated
10
47332
4733.25
Supply & fixing pillar cock Jaquar make Queen series with 7 years warranty: Chrome plated
10
19621
1962.15
Supply & fixing Angular stop cocks with wall flange Jaquar make Queen series with 7 years warranty: Chrome plated
10
47332
4733.25
Supply & fixing of Bottle trap Jaquar make with 7 years warranty: Chrome plated
10
18508
1850.8
Supply & fixing soap dish Jaquar make queen series: with 7 years warranty: Chrome plated
10
18201
1820.15
Supply & fixing of toilet paper holder Jaquar make queen series: with 7 years warranty: Ivory Gold
10
14668
1466.8
No. of BOQ items: 73(Seventy Three) only
-
63985222
-
(Rupees Six Crores Thirty Nine lakhs Eighty Five thousand Two hundred and Twenty Three Only)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements