Andhra Pradesh Industrial Infrastructure Corporation Tender
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Industrial Infrastructure Corporation - APIIC Tender
Civil And Construction
Civil Works Others
Construction Works
Opening Date9 Feb 2022
Closing Date24 Feb 2022
Tender Amount₹ 15,70,52,995
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
477749Bid Award Id
ViewTender No
T No 48/CE-II/APIIC/2021-22 Dt:08.02.2022Tender Authority
Andhra Pradesh Industrial Infrastructure Corporation ViewPurchaser Address
-Website
http://https://www.apiic.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Filling with Dust in basement or foundation trenches with all leads in layers not exceeding 15 cms, consolidtaing each deposited layer by watering and ramming, all operational incidentil, labour charges, including cost and conveyance of water, to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
1802
-
1012
PCC (1:3:6)
-
-
-
Plain Cement Concrete (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402)
173
-
4818
PCC(1:4:8)
-
-
-
Plain Cement Concrete (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402)
1093
-
4575
Borrowed Earth
-
-
-
Filling with borrowed earth obtained from local sources spreading in layers to low lying area not more than 150mm thick including watering and compacting each layer to OMC compaction including cost and conveyance of all materials, water, etc., complete as directed by the engineer in charge.
10380
-
534
RCC Work
-
-
-
Supply and placing of the Design Mix Concrete of grade M-30 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. with minimum cement content as per IS code from standard suppliers approved by the department including centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
-
-
-
FOUNDATIONS
-
-
-
Footing
460
-
9644
PLINTH BEAMS
128
-
12266
Pedestal
95
-
10242
LINTELS
75
-
12788
Sun Shades
170.4
-
1066
Slab For Ramps
6.6
-
6736.9
Beam For Toilet
7
-
12022
Reinforcement FE 500
-
-
-
Providing High Yield Strength Deformed steel bars (Fe 500 grade as per IS 1786-1979) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales etc., complete at all heights for finished item of work. (APSS No.126)
116
-
78675
Antitermite treatment
-
-
-
Providing Antitermite treatment as per IS 6315 (Part - 2) 2001 (Pre-constructional chemical treatment measures) along the internal & external vertical faces of the columns, plinth beams, basement and top surface of the basement filling below flooring bed as per the specified procedure conforming to IS 6315 (Part-2) 2001 and other relevant approved specification duly using Chlorpyriphos/ Lindane emulsifiable concentrate 20% with 1% concentration @ 7.5 Litres/ sqm of the vertical surface & @ 5.0 Litres/ sqm of the horizontal surface of the substructure to a depth of 500 mm around columns & 300 mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. & cost & conveyance of all materials to the site, cost of labour for spraying, rodding etc. complete for finished item of work as per the approval of the Engineer-in-Charge.
9828
-
373
Brick Work
-
-
-
Brick Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using Flyash solid blocks of size 290mmx225mmx140mm and having minimum compressive strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, Flyash solid blocks, water etc., to site, including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete at all heights for finished item of work. (APSS No. 501 & 504).
451
-
6536
Internal & External plastering
-
-
-
Plastering to walls 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for finished item of work for all heights. (SS 901,903 & 904)
2146
-
466
Plastering to walls 20 mm thick in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for finished item of work for all heights. (SS 901,903 & 904)
2146
-
480
Painting, Priming Coat on External Plastered Surface
-
-
-
Painting with plastic emulsion Grade-I paint to exterior faces of new walls with two coats of approved make shade and colour over a prime coat including cost and conveyance of materials like Plastic Emulsion paint of Grade - I to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying two coats of Plastic Emulsion one coat of primer, total three coats etc., complete for finished item of work (APSS No.910, 911&1201) in all floors.
2146
-
184
Qty for external plaster
-
-
-
Internal Paint
-
-
-
Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls
2146
-
138
Qty from internal plaster
-
-
-
Window
-
-
-
Providing and fixing factory made uPVC Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm). white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc.
242.55
-
7015
Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.
-
-
-
Providing and fixing welded M.S. grills with MS 12mm Square bars for window / ventilator openings including welding and rounding the noses and grinding smooth the joints and fixing with necessary screws, bolts including two coats of first quality synthetic enamel paint over a coat of zinc chromate primer, etc. complete, for Finished item of work including cost of all incidentals and T&P and as directed by Engineer -In -Charge.
3748.5
-
103
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by endlocks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
8.9
-
3976
GEAR ROLLING SHUTTER
-
-
-
Providing fabricating and fixing in position MS rolling shutter with Gear as per IS 6248-1979, with following specifications as directed by engineer incharge etc complete. Rolling shutter to be made of 1.20mm x 75mm MS Lath of convex corrugations. Lock plate with MS sheet of min. 3.15mm thickness with strengthening angle 35mm x 35mm x 2mm size. The locking plate should be provided with 2 pulling handles on both inside and outside. The guiding channels on both sides should be of min. 75mm depth made in 3.15mm MS sheet. The curtain should project min. 60 mm width clearances of 10mm. The guide channels should be fixed to column / wall with min. 3 supporting cleats / bolts / screws a dowel / hook / pins for embedding in walls. Spacing of these should not be more than 0.75m.Bracket plates should be of min. 450mm x 450mm x 6mm size. 40mm x 40mm x 6mm angle min. 200mm long split at end as hold fast should be welded to bracket plate. The suspension shaft of the roller shall be made of 50mm dia. Nominal bore steel pipe confirming to IS 1161-1968.The pipes of suspension shaft which are clamped to brackets shall be fitted with rotatable cast-iron pulleys to which curtain is attached. The pulleys shall be interconnected with a cage formed out of MS flats so that torque is distributed uniformly. Self aligning two row ball bearings shall be provided with special cast-iron casting at the extreme pulleys at either ends.
208
-
5329
The casting rings shall have min. spacing of 15cm and there shall be at least 4 nos. flats running throughout the length of the roller. Hood cover shall be hexagonal or square in shape made of min. 0.90mm thick MS sheet with necessary stiffening by MS angles. All gears, worms, etc used in the assembly of the rolling shutters shall be machine-cut. Worm gear wheels shall be of high grade cast iron or mild steel or phosphor bronze. The worms shall be of mild steel or gun-metal or phosphor bronze. All safety devices like anchoring rods, central hasp and staple should be fixed to bottom lock plate.
-
-
-
The rate should include supplying and fixing of all accessories like locking, arrangements, pulling hooks, handles, sliding locks, stoppers. All the components of rolling shutter shall be given are coat of brushing quality ready mixed primer.The rate is for finished product all inclusive of cost of material like hood cover and springs, bearings, locks, ball bearings, all accessories etc., complete including transportation labor charges for manufacturing transportation and fixing in place to line and grade, cost and operational charges of T&P, overheads all incidentals etc complete for finished item of work as spl spn 1108.
-
-
-
Providing and laying Vaccum Dewatered flooring of 100mm thick with M20 Design Mix cement concrete minimum 350 kgs of cement and 15mm and below size graded aggregate with top 15 mmthick wearing coat above 85 mm thick M20 with one part of cement and 1:1 1/2 parts of crushed stone chips (6mm size) laid in line & grade as per drawings and directions including shuttering machine mixing, laying, compacting, vaccum dewatering and curing, use of coarse aggreagte and fine aggregate in specified proportion, vibrating and finishing with a neat cement float finish on top and dewatering using vaccum dewatering machine, curing etc., complete for finished item of work for flooring of Godown. The construction joint to be formed by cutting with mechanical saw in both direction at 4X4 m. interval the size of groove shall be 3 mm x 100 mm portion with polysulphide joint sealant be provided as directed by Engineer in charge
9828
-
1270
Structural steel
-
-
-
Designing, providing, fabrication and erection/fixing in position PEB structure for PEB Roofing System as per following specification. The structure should be designed as per relevant codes for dead load, live load of 0.57KN/M2 (To take care of the firefighting pipe loads whichever is higher), wind load of 50m/sec, seismic loads as per IS 1893 and its combinations as per codes. The structural designs and drawings should be submitted along with design calculations and basis of design, incorporating the actual site dimensions and get approved by the engineer in charge. The clear dimensions of the godown to be 52m x 90.00m. The average floor level of godown is 0.45 m above the finished ground level.
-
-
-
Fabrication should be done as per relevant IS code and approved drawing and the structural system should be designed, fabricated and erected as per the actual site dimensions of the Godowns and canopy. as directed by Engineer in charge. The rates of structural steel should include cost and erection and painting of main structure bracings purloins, steel substructure etc at site. The fabrication should be as per actual site alignment of the columns and their spacing. The rate should be inclusive of providing and applying one coat of red-oxide paint and minimum two coats of industrial quality synthetic enamel paint to the steel structure to give a finished look. The rates should also include one coat of enamel touch-up paint to the supporting structure after erection of the structure. The payment will be made for the actual work executed on weight basis. The rate is inclusive of transportation, fabrication, painting ,erection both with tripod and mechanical crane, incidentals, hire and operational charges of tools and plants, getting temporary power supply, design and drawing preparation charges all-inclusive for finished item of work.
532
-
128880
For all structural items like builtup beams, columns, purlins, grids, bracings,hardware and other accessories
-
-
-
Structural steel requried for ACP panles support i.e. Bracket projection from main shed, stub columns upto ridge height, cladding memebers, bracing members etc.
-
-
-
MS louvers
-
-
-
Providing 10mm thick UV resistant multiwall polycarbonate sheets fixed to the purlins with aluminum universal glazing set 40mm wide for jointing and fixing sheets and 14 size self-drilling screws with neoprene washer. Side laps are stitched with self-tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape including cost and conveyance of all materials and labour charges, overheads and contractor's profits , etc. complete for finished item of work
104
-
1807.98
Roofing
-
-
-
Supply and installation of Pre-Painted Galvalume Trapezoidal Profile Roofing Sheets with 0.50mm thickness ,coating :Alu-Znic coating AZ150 GSM .TensileStrength :550 MPA .Paint coating: Regular Modified Polyester Painting .Painting Thickness (Top):18 to 20 Microns ,(Bottom):5 to 7 Microns .Sheet width :1.020,Length:Maximum 12 Meters with Regular Range Colours The sheet and the ridges should be colour coated galvalume AZ 150 (min 150 gms/sq.mt. total on each sides) profiled sheets for roofing . The feed material is manufactured out of nominal 0.45 mm base metal thickness (BMT) (0.5 mm TCT)confirming to ASTM A792, hi-strength steel with min.550 MPa yield strength metallic hot dip coated with aluminium -Zinc alloy (55 % aluminium 43.4% zinc 1.6% silicon) with COLORBOND are equivalent steel quality super durable polyester paint coat (with inorganic pigment).
10296
-
625
The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um, exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with suitable square fluting in the five pan at nominal 180-250 mm center to center. The end rib shall be designed for anti-capillary groove & return leg. The feed material should have coil manufactures product details marked at regular interval. Including fasteners with min. fastened with min.25 um zinc-tin alloy coated, hex head, self-drilling screw etc. complete (Min Weight of profile 4.52 Kg/Sqm). The sheet should be provided with sky light with min 2mm thick embossed clear polycarbonate sheet with guard mesh(for 5% of roof area) complete with tappipng screws with EPDM bonded GI washers all as per specifications and codes to provide a leak-proof roof and roof drainage system directed by Engineer in charge. The payment for finished item will be made on the basis of sheet area measured actual and area of canopy if provided will be measured in plan.
-
-
-
Side Cladding
-
-
-
Supply and installation of Pre-Painted Galvalume Trapezoidal Profile Roofing Sheets with 0.50mm thickness ,coating :Alu-Znic coating AZ150 GSM .TensileStrength :550 MPA .Paint coating: Regular Modified Polyester Painting .Painting Thickness (Top):18 to 20 Microns ,(Bottom):5 to 7 Microns .Sheet width :1.020,Length:Maximum 12 Meters with Regular Range Colours The sheet and the ridges should be colour coated galvalume AZ 150 (min 150 gms/sq.mt. total on each sides) profiled sheets for roofing . The feed material is manufactured out of nominal 0.45 mm base metal thickness (BMT) (0.5 mm TCT)confirming to ASTM A792, hi-strength steel with min.550 MPa yield strength metallic hot dip coated with aluminium -Zinc alloy (55 % aluminium 43.4% zinc 1.6% silicon) with COLORBOND are equivalent steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um, exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with suitable square fluting in the five pan at nominal 180-250 mm center to center. The end rib shall be designed for anti-capillary groove & return leg. The feed material should have coil manufactures product details marked at regular interval. Including fasteners with min. fastened with min.25 um zinc-tin alloy coated, hex head, self-drilling screw etc. complete (Min Weight of profile 4.52 Kg/Sqm). The sheet should be provided with sky light with min 2mm thick embossed clear polycarbonate sheet with guard mesh(for 5% of roof area) complete with tappipng screws with EPDM bonded GI washers all as per specifications and codes to provide a leak-proof roof and roof drainage system directed by Engineer in charge. The payment for finished item will be made on the basis of sheet area measured actual and area of canopy if provided will be measured in plan.
2917
-
625
Insulation
-
-
-
Towards supply and fixing 50mm thick 48kg/Cum density Rockwool insulation with one aluminium backing and GI wire mesh of 50x50x1.6mm complete for roof area only with requisite fasteners and as per the specified parameters and codes as directed by the enginer incharge.
9720
-
650
Supply and fixing of ALLUMINIUM TURBO VENTILATORS on sky light roof sheet inner dia 600mm dia and outer dia of 800mm with 2 sets of 12G - 14x25 SDTS - 6 Screws FRP lining, rubbers gasket, GI Strrup 2mm thick 12G-14x25 SDTS @ 50C/c installed as per approved drawing at site etc. including cost and conveyance, taxes of all materials, accessories, labour charges etc., complete for finsihed item of work with roof sheet 2mm thick of size 1.5x1.00M.
20
-
7450
Painting two coats with synthetic enamel paint first grade to new iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (SS No. 1201, 1212 & 1207).
8487.6
-
129
Supply of Roof Accessories medium size:Ridge, Barge Cap, Corner Trim, L Flashing,Down Pipes, Gutter etc.,with0.47mmthick,Width:0.585,Length:Maximum 2½Meters
858
-
357
Reinforced Brick Masonary
-
-
-
Reinforced Masonry for partition walls (115mm thick) in CM (1:4) prop. (Cement : Sand) using Flyash lime solid blocks of size 290mm x 115mm x 140mm having minimum compressive strength of 50 Kg/Sq.cm and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, Flyash solid blocks, water etc., to site, all operational, incidental charges such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., but excluding cost of steel and its fabrication charges complete for finished item of work. (APSS No. of 501 & 509)
131
-
713
Non Skid Ceramic Tiles
-
-
-
Flooring with Non-skid Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of first quality of make set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid including neat cement slurry of honey like consistency spread at the rate of 3.3 kgs per Sqm. and filling the joints with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles, white cement etc., to site, (excluding cost of C.C. bed) including cost of on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge curing etc., complete for finished item of work in all floors. (APSS No.701 & 707)
192
-
953
Dadooing
-
-
-
Dadooing to walls with ISO accredited coloured glazed tiles of make as approved by Engineer-in-charge of size not less than 300mmx200mm size and top border tiles of size 200mmx100mm set over 12mm thick CM (1:5) base coat and neat grey cement slurry of honey like consistency at the rate of 3.3 kg.s per sq.mt and jointed with white cement paste mixed with pigment of matching shade to match the shade of tiles including cost and conveyance of all materials and water to work site cost of base coat, all operational, incidental, and labour charges such as mixing mortar, fixing in position, including lift charges, curing etc., complete for finished item of work in all floors. (APSS No.701 & 707)
555
-
1039
Doors - 1200mm x 2100mm
-
-
-
Supply and fixing of doors as per approved drawings with 2nd class teak wood frame of section 125mm x 75 mm and ISI marked flush door shutter of 40mm thick single shutters with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides and fixed with 1mm thick laminate matt finish both sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked aluminium fixtures of 4 Nos butt hinges 150mm long , 1 No. aldrop 300mm x 16 mm dia, 1 Nos. tower bolt of 300 mm x 12 mm dia at top, 2 Nos.150mm long handle, including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2100mm)
16
-
6782
PVC Doors
-
-
-
Providing and fixing of Polyvinyl chloride (PVC) Doors with a Frame size of 50 x 47mm with a wall thickness of 5mm, made out of extruded 10 mm rigid PVC foam sheet and 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness, Aluminium+ door handles of 150mm long and Aluminium tower bolts of 150 mm long including all labour charges for fixing, cost of fixtures with required no.of screws, bolts and nuts for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work
45
-
4377
UPVC Ventilators
-
-
-
Providing, supplying & fixing of Top hung Ventilator made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60 x 55 mm with reinforcement of 1 mm thickness, Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 x 60 mm with reinforcement of 1.5 mm thickness. Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded with gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware, single point locking and friction stays. Wall thickness of frame, mullion and sash shall be 2.0 mm Single openable ventilator shuttersize of 2’ 0” x 2’ 0” (609.6 x 609.6mm) frame section size of80x45mm,shutt er frame section size of 52 x 25mmthick
11
-
6305
IWC
-
-
-
Supplying and fixing 630mm x 450mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, angle stop cock 12.70mm dia. first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges overheads & contractors profit etc., complete for finished item of work.
10
-
4295
EWC
-
-
-
Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 ofwhite glazedwith 'P' trap with PVC low level flush tank, seat cover of approved make with rubber buffer and cap 15 mm angle stop cock 450mm long PVC inter connection pipe wall flanges all of approved make,,etc. complete for finished item of work in all respects:
10
-
4529
Wash Basin
-
-
-
Supplying & Fixing Indian make Flat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Double C.P. Pillarcock
8
-
2565
Soap Dish
-
-
-
Supply & fixing NP soap dish heavy type complete including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
8
-
247
TV Shape Mirror
-
-
-
Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm , plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
8
-
538
Bib Cock
-
-
-
Supplying and fixing Long body bib cock fancy type of size 12.70mm dia of Indian make heavy duty as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
26
-
651
PVC Pipes
-
-
-
Supplying and fixing of SWR PVC pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)
-
-
-
160mm Dia
300
-
738
110mm Dia
80
-
271
75mm Dia
120
-
195
Supplying and fixing of SWR PVC fittings (Prince/ Sudhakar/ Kisan/ Supreme or any ISI brand) as per site requirement, including cost and conveyance of all materials to site, labour charges, etc, complete for finished item of work at all floor levels.
-
-
-
110mm Dia T-Bends
21
-
107.93
110mm Dia Offsets
41
-
69.31
75mm Dia T-Bends
4
-
59.08
75mm Dia Offsets
11
-
38.63
75mm Dia L Bends
5
-
49.99
Urinals
-
-
-
Supplying& Fixing white glazed flat back half stall urinals of size :590x375x390mm 1st quality conforming to IS:2556-1995 with standard C.P.Spreader of overall size 95 x 95 x 57 mm conforming to IS:2556-Part 6,Sec-6-1974 fixed with screws complete Indian make, Chrome plated along with bottle trap of jaquar make including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.
10
-
3616
Urinals
-
-
-
Supplying and fixing white glazed Ladies urinals with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.
10
-
2250
Marble Partitions
-
-
-
Supplying and fixing of 600 to 900 mm size and 16mm to 20 mm thick polished marble slab partitioins for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
8
-
1857.53
Porcelian Channels
-
-
-
Supplying & fixing 4 " x 24 " (101.6x609.6mm) white glazed porcelain channel fixed in brick masonry white cement pointing.
16
-
560
CPVC Pipes
-
-
-
Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels.
-
-
-
28.60mm OD
180
-
146
22.20mm OD
50
-
101
Health Faucet
-
-
-
Supplying and fixing Chrome plated bib cock cum health faucet with 1m long flexible tube and wall hook of Jaquar make queen series/Jupiter Aqua Lines-JAL-make Nira as approved by Engineer-In-Charge with 7 years warranty with necessary fittings etc., complete including cost and conveyance of all materials, labour charges , overheads & contractor profit complete for finished item of work in all floors
12
-
3297
PVC Cowl Vents
-
-
-
Supply and fixing of SWR PVC Cowl vents
-
-
-
110mm Dia
8
-
19
75mm Dia
8
-
13
Water Tank
-
-
-
Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks
4000
-
5.68
Drilling of Tube/Bore wells by down the hole manner to a finished diameter of 163mm dia in all formations/stratas such as medium hard rock formation, consolidation formations etc., including drilling in over burdern soils to a diameter of not less than 200mm including insertion of 180mm diameter including the insetion of unplasticized PVC pipe with work presure not less than 6 Kg/Sqm as casing pipe conforming to IS specification No.4965/1988 with ISI Mark up to a depth as directed by the department and flusing 8 hours for Bore development conducting yield test including transportaion of drilling rigs supporitng vehicles including crew charges and all other charges as required etc., complete all done to the satisfactioin of department and as stipulated in the technical specification enclosed to this schedule but excluding the cost of PVC casing pipes, couplingts and cap, the entire work should be carried out as per IS2800 part I and II/1979. The rate is exclusive of all taxes in rural and urban areas.
330
-
397
Suppy&Delivery of 180mm dia. PVC Pipes with working pressure of 6Kg/sqcm as casing pipe for borewells confirming to IS Specificatioin No.4985/2000 with ISI mark. The rate is exclusive of all taxes.
50
-
991
Supply and erecting ISI Mark submersible 5.00HP, 3Phases, 8 stages 5 star Pmpset suitable for 156mm dia bore well with high quality wear resistence and dynamically balanced bronze impeller with stainless stell shaft sleeves, pump coupling and pivot of 3 phase 415V, 50HZ AC power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in nwater and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength including cost, conveyance and labour charges etc., complete.
1
-
45218
PVC Bore cap suitable for 180mm dia PVC pipe used for bore wells. The rate is exclusive of all taxes.
1
-
227
Supply & Fixing of 50 mm dia Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete For Borewell
150
-
519
Supply and fixing of Toilet signage boards in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton.
4
-
1200
Fasade
-
-
-
Providing and installation of Illuminated signage board - Acrylic material YSR EMC, letters of height 1.35 mtr finished complete with Jointing, Fixing etc. for finished item of work as directed by the Engineer
8
-
50000
Providing and installation of Illuminated signage board - Acrylic material Shed No, letters of height 1 mtr finished complete with Jointing, Fixing etc. for finished item of work as directed by the Engineer
8
-
45000
Supplying and fixing aluminium composite cladding with skin material 0.5 mm thick aluminium sheet cover material natural polyethylene aluminium cladding panel surface wooden finishing fixed with extruded aluminium basis frame (50x25x1.5mm) angle cleats,weather sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel work including necessary accessories complete in all respects including all scaffolding and labour charges etc., complete for finished item of work but excluding cost of structural steel fabrication, if any, ACP Cladding - 4 mm thk
3000
-
3042.61
Fire Fighting Sump
-
-
-
Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308).and as directed by the Engineer-in-charge upto 3m depth - By Mechanical means
248.75
-
116
Filling with Dust in basement or foundation trenches with all leads in layers not exceeding 15 cms, consolidtaing each deposited layer by watering and ramming, all operational incidentil, labour charges, including cost and conveyance of water,sand to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
33.62
-
1012
Plain Cement Concrete (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402) {BLD-CSTN-3-10}
10.08
-
4818
Supply and placing of the Design Mix Concrete M 30 grade corresponding to IS 456 with minimum cement content of 400 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) and as directed by the Engineer-in-charge.
-
-
-
Bottom Slab 300 mm thick
63.02
-
2653
Top Slab 140 mm thick
49.54
-
1529
Sump Walls 280 mm thick
98.88
-
3764
Providing High Yield Strength Deformed steel bars (Fe 500 grade as per IS 1786-1979) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales etc., complete at all heights for finished item of work. (APSS No.126)
5.48
-
78675
Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P. F.O.R. destination including, loading, unloading & stacking at site but excluding central excise duty, sales tax, octroi and other Govt levies etc., as applicable. I.S.I Mark
2
-
2423
Plastering to walls 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for finished item of work for all heights. (SS 901,903 & 904)
227.02
-
466
Pump Room (24,000 Litres Capacity)
-
-
-
Earth work excavation by Mechanical means for Sump/OHT/Pump Room & Pipe Line and depositing on bank in all types of soils like morum, red earth, gravely soils, ordinary soils upto SDR in all conditions including hire & operational charges of machinary, labour charges for setting out, construction of shoring and bracing, removal of stumps and other deletarious matter, dressing on sides & bottom of trench in all conditions viz dry, wet and slushy etc. complete for finished item of work as per SS 20 B (APSS 308)
265.36
-
116
Filling with Dust in basement or foundation trenches with all leads in layers not exceeding 15 cms, consolidtaing each deposited layer by watering and ramming, all operational incidentil, labour charges, including cost and conveyance of water,sand to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
27.94
-
1012
Plain Cement Concrete (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) for levelling course in foundations using 40mm size (SS5) hard,machine crushed HBG metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all charges for machine mixing, laying concrete in foundations ramming in 15 cm layers finishing top surface smooth to the required level curing etc., complete for finished item of work. (APSS No. 402)
32.19
-
4818
Supply and placing of the Design Mix Concrete of grade M-30 corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc. with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
-
-
-
Footings
32.52
-
9644
Columns - GF
20.8
-
12772
Plinth Beams
11.32
-
12266
Pump room Roof Slab Beam - GF
14.36
-
12022
Water tank base beam - FF
4.41
-
12022
Water Tank Roof Beams SF
1.63
-
12022
RCC Slab GF (125mm Thick)
49.5
-
1457
Staircase
31.88
-
1457
Providing High Yield Strength Deformed steel bars (Fe 500 grade as per IS 1786-1979) of different diameters, including labour charges for cutting, bending to required sizes and shapes placing in position with cover blocks of approved materials and size and tying with binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales etc., complete at all heights for finished item of work. (APSS No.126)
7.09
-
78675
RR masonry in CM(1:6) prop. using hard granite stone from approved quarry including cost and conveyance of all materials to site, seigniorage charges, all labour charges for dressing stones to required size and shape, mixing of cement mortor, stone wall construction, curing, all taxes, etc. complete for finished item of work.
19.3
-
4441
Filling with borrowed earth obtained from local sources spreading in layers to low lying area not more than 150mm thick including watering and compacting each layer to OMC compaction including cost and conveyance of all materials, water, etc., complete as directed by the engineer in charge.
58.85
-
534
Brick Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using Flyash solid blocks of size 290mmx225mmx140mm and having minimum compressive strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, Flyash solid blocks, water etc., to site, including labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete at all heights for finished item of work. (APSS No. 501 & 504).
77.54
-
6536
Plastering to walls 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer - in - charge etc., complete for finished item of work for all heights. (SS 901,903 & 904)
290.26
-
466
Providing Ornamental Plastering to ceiling 12mm thick in two coats with base coat of 9mm thick in CM (1:4) and top coat of 3mm thick in CM (1:4) prop. using fine sand including neat finishing, including cost and conveyance of all materials like cement, sand, water, etc., to site, and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting of grooves wherever necessary and all taxes, etc., complete for finished item of work.
43.2
-
466
Painting to new walls with 2 coats of ready mixed oil bound washable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls
-
-
-
Same as plastering
290.26
-
138
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
3.6
-
7015
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by endlocks, mounted on specially designed pipe shaft of 50mm dia nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spn: 1108
12
-
3976
Providing structural steel work in tubular trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting complete.etc,
0.81
-
128880
Providing and laying Vaccum Dewatered flooring of 100mm thick with M20 Design Mix cement concrete minimum 330 kgs of cement and 20 mm and below size graded aggregate laid in line & grade as per drawings and directions including shuttering machine mixing, laying, compacting, vaccum dewatering and curing, use of coarse aggreagte and fine aggregate in specified proportion, vibrating and finishing with a neat cement float finish on top and dewatering using vaccum dewatering machine, curing etc., complete for finished item of work for flooring of Godown. The construction joint to be formed by cutting with mechanical saw in both direction at 4X4 m. interval the size of groove shall be 3 mm x 50 mm portion with polysulphide joint sealant be provided as directed by Engineer in charge The construction joint to be formed by cutting with mechanical saw in both direction at 4 m. interval the size of groove shall be 3 mm x 10 mm portion with polysulphide joint sealant be provided as directed by engineer-in-charge.
33.29
-
1270
Providing and fixing welded M.S. grills with MS 12mm Square bars for window / ventilator openings including welding and rounding the noces and grinding smooth the joints and fixing with necessary screws, bolts including two coats of first quality synthetic enamel paint over a coat of zinc chromate primer, etc. complete, for Finished item of work including cost of all incedentals and T&P and as directed by Engineer -In -Charge.
66.24
-
103
No. of BOQ items: 80 (Eighty) only
-
-
-
(Rupees : Fifteen Crores Seventy Lakhs Seventy One thousand Nine Hundred and Fifty Nine Only)
-
-
-
The rates mentioned in schedule 'A' are including overhead charges & Contractors Profit for all items.
-
-
-
The overhead charges includes Labour Amenitites and Labour Importation / Compensation / Site Supervision / Quality Control Charges and Bankers Charges, etc. Hence the contractros quoted percentage is inclusive of all the above including Technical persons and work insurance and no reimbursement for these will be made. The rates given in Schedule 'A' are exclusive of GST and Seigniorage charges.
-
-
-
The rates given in Schedule 'A' are exclusive of GST and Seigniorage charges.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements