Andhra Pradesh Industrial Infrastructure Corporation Tender

To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.

Andhra Pradesh Industrial Infrastructure Corporation - APIIC Tender

Works

Civil And Construction

Civil Works Others

Kakinada, Andhra Pradesh

Opening Date27 Dec 2023

Closing Date10 Jan 2024

Tender Amount₹ 8,43,66,460

Notes

Download

Costs

EMD
₹ 8,44,000
Document Cost
Refer Documents
Tender Fee
₹ 2,360

Description

Unlock the Tender details for free

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Tender Id
704294
Tender No
34/CE(N)/APIIC/2023-24, Dated:22.12.2023
Tender Authority
Andhra Pradesh Industrial Infrastructure Corporation View
Purchaser Address
-
Website
http://https://www.apiic.in/

Unlock the Tender details for free

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

Request Call Back

Documents

Download All

BOQ-1491.5 kBBOQ_FFC_Peddapuram...BOQ_FFC_Peddapuram_EG.xls

Document-4716.3 kBBuilding Technical...Building Technical Specification.doc

Document-3236.4 kBTenderDoc_FFC_Pedd...TenderDoc_FFC_Peddapuram_EG.docx

Document-279.6 kBTender_Detail_7042...Tender_Detail_704294.html

Document-149.3 kBSelf Declaration.d...Self Declaration.docx

Report Missing Document

BOQ Items

DO_NOT_SHOW

Quantity-

Rate-

Amount -

View all details for FREE

Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit, all taxes except GST complete for fnished item of work (APSS NO.309 & 310)

Quantity625

Rate116912

Amount 187.06

Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310) - Filling with Murum

Quantity545

Rate310873

Amount 570.41

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement,fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }, coarse aggregate, water etc. to site and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work. (APSS No. 402)

Quantity50

Rate260179

Amount 5203.59

Providing Antitermite treatment as per BIS - IS 6313 (Part 2) 2013 code specification (Pre-constructional chemical tretament measures) & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry lmidacloprid 30.5% SC ((IS63131) dissolve 2.1 Ml/1 litre of water and apply emulsion / solution @ 7.5 litres /sqm of internal and external verticle surface of the columns, plinth beams (back filling) walls and floor junction, external perimeters along retaining wall @ 5 litres / sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (plinth) and @ 2.0 litres / line metre at expansion joints. The substructure of a depth of 500 mm around columns & 300 mm deep around plinth beams, basement & floor filling area including excavation channel along the wall & rodding, etc., cost and conveyance of all materials to the Site, cost of labour for spraying, rodding, etc., complete for finished item of work as per the approval of the Engineer-in-Charge (plinth area measurements will be taken for measurements). BMT-H. 66

Quantity530

Rate103572

Amount 195.42

Quantity-

Rate-

Amount -

Footings

Quantity35

Rate182125

Amount 5203.59

base ment

Quantity185

Rate962664

Amount 5203.59

Construction of RR masonry in CM (1:6) proportion using OTG stone from approved quarry including cost and conveyence of all materials like cement, sand, water, garnite stone, etc., including labour, mixing of cement mortar construction, scaffolding charges, etc., complete for finished item of work except GST and Seneiorage charges.

Quantity210

Rate1040241

Amount 4953.53

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 }coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing etc., and overheads & contractors profit, except GST and Seneiorage charges complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Quantity-

Rate-

Amount -

a) Footings

Quantity106

Rate1159245

Amount 10936.28

b) Column Pedastals

Quantity36

Rate414520

Amount 11514.45

c) Plinth Beam

Quantity61

Rate824219

Amount 13511.8

Quantity-

Rate-

Amount -

Columns

Quantity-

Rate-

Amount -

Ground Floor

Quantity31

Rate435319

Amount 14042.57

First Floor

Quantity31

Rate445322

Amount 14365.25

Second Floor

Quantity31

Rate456346

Amount 14720.87

Staircase Headroom Portion

Quantity3.3

Rate48578

Amount 14720.87

Lintels

Quantity-

Rate-

Amount -

Ground Floor

Quantity4

Rate56373

Amount 14093.31

First Floor

Quantity4

Rate57292

Amount 14323.13

Second Floor

Quantity4

Rate58303

Amount 14575.93

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials , centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903), Except GST and Seneiorage charges etc., for Chajja / Sunshade

Quantity-

Rate-

Amount -

Sunshade

Quantity-

Rate-

Amount -

Ground Floor

Quantity28

Rate41320

Amount 1475.72

First Floor

Quantity29

Rate43243

Amount 1491.15

Second Floor

Quantity29

Rate44295

Amount 1527.44

Plastered band with 15mm thick with width 10 cm moulded cement mortar band in CM(1:4) (1 Cement:4 Sand) upto 100mm in width raised band including cost and conveyance of all materials like cement, sand , water etc. and all operational, incidental charges on materials & including cost of all labour charges for mixing mortar, finishing, scafollding, lift charges, curing including cutting as directed by the Engineer-in-Charge etc., complete for finished item of work of all heights (SS 901,903,904). Except GST and Seneiorage charges etc.

Quantity3

Rate442

Amount 147.58

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Except GST and Seneiorage charges etc.

Quantity-

Rate-

Amount -

Beams

Quantity-

Rate-

Amount -

Ground Floor

Quantity56

Rate697044

Amount 12447.23

First Floor

Quantity54

Rate683491

Amount 12657.25

Staircase Headroom Portion

Quantity5

Rate63286

Amount 12657.25

Second Floor

Quantity54

Rate699273

Amount 12949.5

Staircase Headroom Portion

Quantity5

Rate66212

Amount 13242.5

RCC Slabs - 125 mm Thick

Quantity-

Rate-

Amount -

Ground Floor

Quantity1190

Rate2182495

Amount 1834.03

First Floor

Quantity1150

Rate2139333

Amount 1860.29

Staircase Headroom Portion

Quantity75

Rate139521

Amount 1860.29

Second Floor

Quantity1150

Rate2179227

Amount 1894.98

Staircase Headroom Portion

Quantity75

Rate142123

Amount 1894.98

Supplying fitting and placing Thermo Mechanically Treated (TMT) (Fe 500 grade as per IS 1786-1979) using primary producers like TATA, SAIL, VSP, Jindal, Shyam Steel etc., of bar reinforcements below 36mm dia.s for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete all taxes except GST for finished item of work.( APSS No.126)

Quantity130

Rate11589211

Amount 89147.78

Providing and fixing welded MS grills with MS 12 mm square bars for window / ventilator openings including welding and rounding the noces and grinding smooth the joints and fixing with necessary screws, bolts including two coats of first quality synthetic enamel paint over a coat of zinc cromate primer, etc., complete for finished item of work, including cost of all incidentals and T & P as directed by Engineer-in-Charge. Except GST.

Quantity5050

Rate603323

Amount 119.47

Painting Priming Coat on new Iron Works of Red Oxide Primer of first grade including cost and conveyance of all materials to Site, incidental, operational and labour charges complete for finished item of work.( APSS No.1212) Excluding GST

Quantity250

Rate20900

Amount 83.6

Painting with two coats of synthetic enamel paint of first garde for new iron works including cost and conveyance of all materials to Site, incidnetal, operational and labour charges complete for finished item of work.

Quantity250

Rate36660

Amount 146.64

Supplying and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi chamberedframe with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks,EPDM gasket, wool pile, zinc alloy (white)Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels)made of (small series) frame 92 x 44 mm & sash 32 x 60 mmboth having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm). including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. Except GST.

Quantity180

Rate1840563

Amount 10225.35

Brick Masonry work in CM(1:6) prop (Cement : Screened sand) in superstructure with fly ash cement / of size 290mm x 225mm x 140mm for manufacturing fly ash solid blocks using fly ash from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes except GST on all materials and labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, overheads and contrctor profit etc., complete all taxes except GST for finished item of work. (APSS No. 501 & 504).

Quantity-

Rate-

Amount -

Ground Floor

Quantity370

Rate2829445

Amount 7647.15

First Floor

Quantity375

Rate3179043

Amount 8477.45

Seocnd Floor

Quantity375

Rate3270712

Amount 8721.9

Terrace

Quantity55

Rate493293

Amount 8968.97

Brick Masonry for partition walls 0f 11.5 cm thick for superstructure in CM (1:3) prop. (Cement : Screened sand) using second class traditional size bricks as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm including cost and conveyance of all materials, labour and all operations for constructing half brick masonry, mixing cement mortar, curing, etc., complete for finished item of work. Except GST.

Quantity-

Rate-

Amount -

Ground Floor

Quantity160

Rate214960

Amount 1343.5

First Floor

Quantity160

Rate276912

Amount 1730.7

Seocnd Floor

Quantity160

Rate288918

Amount 1805.74

Plastering 20 mm thick to external surfaces of masonry walls in two coats with base coat of 16 mm thick in CM (1:6) and top coat of 4 mm thick CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges seigniorage charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work. External Walls.

Quantity-

Rate-

Amount -

Ground Floor

Quantity1850

Rate983959

Amount 531.87

First Floor

Quantity1850

Rate1093553

Amount 591.11

Seocnd Floor

Quantity1850

Rate1111221

Amount 600.66

Terrace

Quantity250

Rate152670

Amount 610.68

Plastering 12 mm thick to Internal surfaces of masonry walls in two coats with base coat of 8 mm thick in CM (1:5) and top coat of 4 mm thick CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site including all operational incidental charges, all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves wherever necessary, etc., complete for finished item of work for Internal Walls

Quantity-

Rate-

Amount -

Ground Floor

Quantity1850

Rate956172

Amount 516.85

First Floor

Quantity1850

Rate1065766

Amount 576.09

Seocnd Floor

Quantity1850

Rate1083434

Amount 585.64

Terrace

Quantity250

Rate148915

Amount 595.66

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler y putty knife / muslin pad, air dry for 2 -3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Quantity-

Rate-

Amount -

Ground Floor

Quantity1850

Rate422096

Amount 228.16

First Floor

Quantity1850

Rate445313

Amount 240.71

Seocnd Floor

Quantity1850

Rate454323

Amount 245.58

Terrace

Quantity250

Rate62615

Amount 250.46

Providing and applying wall putty of white cement or polymer or cement based of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty / texure paint filler by putty nife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, etc., complete for finished item of work for External walls.

Quantity-

Rate-

Amount -

Ground Floor

Quantity1850

Rate770229

Amount 416.34

First Floor

Quantity1850

Rate793428

Amount 428.88

Seocnd Floor

Quantity1850

Rate802456

Amount 433.76

Terrace

Quantity250

Rate109657

Amount 438.63

Painting to ceiling with one coat of cement paint of approved brand and shade over a base coat of approved cement primer grade making 2 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labor charges and incidental such as scaffolding lift charges etc., and overheads and contract profit complete for finished item of work including conveyance of all materials in all floors.

Quantity-

Rate-

Amount -

Ground Floor

Quantity1190

Rate163303

Amount 137.23

First Floor

Quantity1150

Rate157814

Amount 137.23

Seocnd Floor

Quantity1150

Rate157814

Amount 137.23

Staircase Headroom Portion

Quantity75

Rate10292

Amount 137.23

Ceiling plastering single coat in CM (1:4) 8 mm thick including cost and conveyance of all materials like cement , sand water etc., to site including sales and other taxes on all materials, and all operational incidental charges on materials and including cost of all labour charges for mixing mortar, finishing curing as directed by Engineer - In - Charge etc., and overheads & contractors profit complete for finished item of work (SS 901, 903 & 904)

Quantity-

Rate-

Amount -

Ground Floor

Quantity1190

Rate184699

Amount 155.21

First Floor

Quantity1150

Rate233128

Amount 202.72

Seocnd Floor

Quantity1150

Rate245479

Amount 213.46

Painting two coats to newly plastered external walls with acrylic exterior emulsion paint having VOC (volatile Organic Compound) content less than 50 grams/liter of approved colour and brand over a primary coat (total 3 coats) including cost and conveyance of all materials like acrylic exterior emulsion paint to site including cost of brushed scaffolding charges lift charges and labour charges such as preprinting the wall applying three coats of plastic emulsion etc., complete for finished item of work (APSS No. 910,911 & 1201) Note all paints should be with low emitting materials with conform to LEED criteria.

Quantity5800

Rate675410

Amount 116.45

Painting to walls with 2 coats of water proof cement paint of approved brand and shade over a base coat of aproved cement primer grade-II making 3 coats in all to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered materials,including cost and conveyance of all materials to work site and all operational charges, incidental, all labour charges etc., complete for finished item of work as per SS 912 for internal walls.

Quantity9365

Rate2409989

Amount 257.34

Providing and laying Vacuum dewatered flooring of 50mm thick with M20 Design Mix Cement concrete minimum 330kgs of cement laid in alternate panels to line & grade as per drawings and directions including shuttering machine mixing laying, compacting, vacuum dewatering and curing, using of coarse aggregate and find aggregate in specified proportion vibrating and finishing with a neat cement float finish on top and dewatering using vacuum dewatering machine curing etc., complete for finished item of work for flooring for parking.

Quantity-

Rate-

Amount -

Ground Floor

Quantity720

Rate513136

Amount 712.69

First Floor

Quantity700

Rate498883

Amount 712.69

Seocnd Floor

Quantity700

Rate498883

Amount 712.69

Flooring with polished Granite (Tandur) 15 to 18 mm thick set over base coat of cement mortar (1:8) 20 mm thick over CC bed already laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost of all materials complete for finished item of work.

Quantity-

Rate-

Amount -

Ground Floor

Quantity450

Rate328918

Amount 730.93

First Floor

Quantity450

Rate328918

Amount 730.93

Seocnd Floor

Quantity450

Rate328918

Amount 730.93

Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630 (Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, etc., complete for finished item of work.

Quantity-

Rate-

Amount -

Ground Floor

Quantity45

Rate47250

Amount 1050.01

First Floor

Quantity45

Rate47250

Amount 1050.01

Seocnd Floor

Quantity45

Rate47250

Amount 1050.01

Providing dadooing to walls with glazed plain coloured wall tiles 1st quality of size not less than 300mm X 200mm with borders as approved by Engineer-in-Charge set over base coat of CM (1:5) 12mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads & contractor profit complete for finished item of work.

Quantity-

Rate-

Amount -

Ground Floor

Quantity75

Rate64944

Amount 865.93

First Floor

Quantity75

Rate64944

Amount 865.93

Seocnd Floor

Quantity75

Rate64944

Amount 865.93

Providing impervious coat to exposed RCC roof slab and surfaces of sump, sump side wall, sump bottom slab,in side of septic tank, in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 20 mm thick mixed with 1 kg of water proofing compound per bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including all operational, incidental and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing rounding off junctions of wall and slab etc., complete for finished item of work. (APSS No. 901 & 903).

Quantity75

Rate42732

Amount 569.76

Supply and fixing of doors as per approved drawings with 2nd class teak wood frame of section 125mm x 75 mm ISI marked flush door shutter of 40mm thick single shutters with bond wood solid block board type Core having cr bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory m conforming to IS 2202-1991 (Part-1) both sides commercial ply with internal lipping on all sides and fixed with 4mm th veneer finish both sides including cost and conveyance to site of teak wood frame, flush shutter including supply fixing 4nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 4Nos brass hinges 150mm long, 2Nos. brass tower bolt of 300 mm x 12 mm dia at top & bottam, 1 Nos heavy duty door stopp Heavy duty mortise lock 6/7 levers with brass heavy handles including fixing the fixtures to door with required numbe screws, bolt and nuts including Melamine polish & labour charges for fixing the frame in position, fixing the shutter to frame etc. complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded

Quantity45

Rate387590

Amount 8613.13

Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles,and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side,and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Paneling of 5mm thick PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-charge, manufacturer’s specific (Output 1.725 SQM)

Quantity57

Rate191587

Amount 3361.19

Providing, supplying & fixing of Top hung Ventilator Double openable ventilator shutter window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer frame section size of 100 x 45mm, Glazed and flymesh shutter frame section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.

Quantity14.04

Rate127708

Amount 9096.02

Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including costof hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec:1108

Quantity180

Rate882243

Amount 4901.35

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & ase support for tanks

Quantity40000

Rate386400

Amount 9.66

STAIRCASE

Quantity-

Rate-

Amount -

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Except GST and Seneiorage charges etc.

Quantity-

Rate-

Amount -

Waist Slab 0f 175 mm thick

Quantity-

Rate-

Amount -

Ground Floor

Quantity47

Rate103212

Amount 2196.01

First Floor

Quantity47

Rate104940

Amount 2232.77

Second Floor

Quantity47

Rate106682

Amount 2269.85

Quantity3

Rate267443

Amount 89147.78

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Except GST and Seneiorage charges etc.

Quantity-

Rate-

Amount -

Ground Floor (Beams)

Quantity0.5

Rate6223

Amount 12447.23

First Floor (Beams)

Quantity0.5

Rate6328

Amount 12657.25

Second Floor (Beams)

Quantity0.5

Rate6474

Amount 12949.5

Providing 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length upto 2.43 mts set over base coat of cement mortar (1:8), 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement, sand, water, granite slabs etc., to work site and all operational, incidental labour & lift charges,Machine cutting charges, half rounding the edges of treads , polishing charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for treads and risers (S.S.701 & special)

Quantity-

Rate-

Amount -

Treads of 0.30m wide:

Quantity-

Rate-

Amount -

Ground Floor

Quantity47

Rate252798

Amount 5378.69

First Floor

Quantity47

Rate252798

Amount 5378.69

Second Floor

Quantity47

Rate252798

Amount 5378.69

Risers of 0.15 m height:

Quantity-

Rate-

Amount -

Ground Floor

Quantity24.99

Rate94908

Amount 3797.87

First Floor

Quantity24.99

Rate94908

Amount 3797.87

Second Floor

Quantity24.99

Rate94908

Amount 3797.87

Supplying and fixing of stainless steel (Grade 304) hand railing, Balustrade, etc., handrailing at 90 cm heigh as per approved drawing with top rail of 32mm dia pipe and 2mm thick medium class and vertical posts of 25mm dia and 1.6mm thick medium class 2 Nos for each step fixed with base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges, overheads & contractors profit,for finished item of work.

Quantity-

Rate-

Amount -

Ground Floor

Quantity28

Rate168525

Amount 6018.77

First Floor

Quantity28

Rate168525

Amount 6018.77

Second Floor

Quantity28

Rate168525

Amount 6018.77

SEPTIC TANK

Quantity-

Rate-

Amount -

Earth work excavation for foundations for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit,all taxes except GST complete, for finished item of work excluding dewatering charges etc., as per SS 20B (APSS 308). for Ordinary Soil - Mechanical Means

Quantity35

Rate4448

Amount 127.1

Quantity0.44

Rate2289

Amount 5203.59

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Except GST and Seneiorage charges etc.

Quantity-

Rate-

Amount -

Bottom Slab 300 mm thick

Quantity5

Rate15288

Amount 3057.69

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, { 50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383 } , coarse aggregate, water etc., to site and seignorge charges,sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete mechanically, laying concrete, vibrating, curing, overheads & contractors profit,all taxes except GST etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)

Quantity-

Rate-

Amount -

Side Wall 300 mm thick

Quantity20

Rate96096

Amount 4804.83

Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal(coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials, centering using Steel scaffolding pipes, jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, vibrating, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402). Except GST and Seneiorage charges etc.

Quantity-

Rate-

Amount -

Top Slab 200 mm thick

Quantity5

Rate11841

Amount 2368.34

Roof Beam

Quantity0.5

Rate6223

Amount 12447.23

Quantity1.51

Rate134613

Amount 89147.78

Quantity5

Rate2848

Amount 569.76

Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit,all taxes except GST complete for fnished item of work (APSS NO.309&310) - Filling with Murum

Quantity20

Rate11408

Amount 570.41

CC Drains

Quantity-

Rate-

Amount -

Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete for finished item of work, excluding seigniorage charges, as per MoRT&H specification 304 (5th Revision) and as directed by the Engineer-in-Charge

Quantity230

Rate29251

Amount 127.18

Providing Vibrated Cement Concrete (1:4:8) mix using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below CC Pavement.

Quantity50

Rate252237

Amount 5044.74

Vibrated reinforced cement concrete M 20 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500,1600,1700 & 2100 (5th revision ) and as directed by the Engineer-in-Charge.

Quantity80

Rate570185

Amount 7127.32

Vibrated cement concrete M 30 grade using 10 to 20mm HBG crushed stone aggregate with minimum cement quantity of 406 Kgs (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., incluiding all taxes except GST and seigniorage charges, complete for finished item of work as per MoRT&H specification 1500, 1600,1700, & 2702 (5th Revision) and as directed by the Engineer-in-Charge for wearing coat.

Quantity4

Rate27439

Amount 6859.98

Pipe Culverts

Quantity-

Rate-

Amount -

Quantity35.5

Rate4514

Amount 127.18

Quantity5

Rate25223

Amount 5044.74

Quantity15

Rate106909

Amount 7127.32

Providing, laying Reinforced cement concrete Hume pipes of 1000mm / 800 mm / 600 mm Dia., NP-3 class for pipe culverts including cost and conveyance of Pipes etc., complete and Labour charges for laying, jointing of 1000 mm / 800 mm / 600 mm dia. R.C.C Hume pipes in position including lifting, aligning, lowering and hoisting etc., as per drawing and as per MoRT&H Specification 2900, 2905 and 2906 (5th Revision) and IRC Special Publication No: 13 and as directed by the Engineer-in-Charge for finished item of work.

Quantity13

Rate89383

Amount 6875.65

CC Road

Quantity-

Rate-

Amount -

Cleaning and grubbing jungle including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300 mm, removal of stumps, of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. MORTH Clause No. 201 (5th Revision).Excluding GST.

Quantity2000

Rate7680

Amount 3.84

Earth work of road in all soils up to SDR by Mechanical means including cutting and loading in tippers, trimming bottom and side slopes in accordance for lines, grades and cross section and transporation to the required location with all loads and lifts, except GST as directed by Engineer-in-Charge for finished item of work (MoRT&H specification 301(5th Revision).

Quantity1130

Rate86004

Amount 76.11

Formation of embankment with useful excavated soils obtained from Roads, drains and Culverts by mechanical means and spreading in layers as directed by the Engineer-in-Charge including sectioning and consolidation with vibratory roller of 8 to 10 Tonnes capacity @ OMC compaction to meet requirement including labour charges for all operations, hire and operational charges of T&P incluiding all taxes except GST and seigniorage charges, all water leads duly maintaining the required camber in the formation etc., complete for finished item of work as per Technical specificatiom MORTH Specification 305 (Payment will be made based on level for finished item of work).

Quantity800

Rate134776

Amount 168.47

Forming embankment with borrowed useful earth from out side by mechanical means and spreading in layers as directed by the Engineer-in-Charge including sectioning and consolidation with vibratory roller of 8 to 10 Tonnes capacity @ OMC compaction to meet requirement including labour charges for all operations, hire and operational charges of T&P incluiding all taxes except GST and seigniorage charges, all water leads duly maintaining the required camber in the formation etc., complete for finished item of work as per Technical specificatiom MORTH Specification 305 (Payment will be made based on level for finished item of work).

Quantity400

Rate146536

Amount 366.34

Compacting original ground supporting embankment Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Table 300-2 for embankment construction.

Quantity300

Rate19410

Amount 64.7

Construction of Granular sub-base by providing suitable material confirming to Grading - V of MoRT&H Table 400-1 with mechanical mix plant method to OMC, carriage of the mixed material to the work site, spreading in uniform layers with Motor grader on prepared lower sub base surface for drainage purpose and compacting with vibratory roller to achieve the desired density etc., incluiding all taxes except GST and seignioragecharges, cost and conveyance of all materials etc complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge.

Quantity140

Rate487905

Amount 3485.04

Laying Plain Cement concrete (1:4:8) Prop using 40mm size HBG machine crushed stone aggregate confirming to table 1000-1 and fine aggregate {50% of River Sand (Natural Sand) & 50% of Manufactured Sand/Crushed stone sand/Rock sand 4.75mm to 2.36 mm confirming to IS 383} conforming to table 1000-2 of MORT&H specification including cost, seigniorage conveyance of all materials (viz) cement, stone aggregate, sand, water etc., to site, labour charges for all operations, machine mixing, laying, finishing smooth to required level, curing, all other incidental and operational charges etc, complete for finished item of work as per MORT&H specification 2100 (5th revision) and as directed by the Engineer-in-charge , except GST & Seigniorage charges

Quantity140

Rate706263

Amount 5044.74

Construction of Un reinforced, dowel jointed plain cement concrete pavement over a preparted sub base with 43 grade cement @ 400 kg per cum coarse and fine aggregate conforming to IS 383, Maximum size of coarse aggregate not exceeding 25mm and confirming to clause 602.2.6.4 mixed in concrete mixer 0.28/0.4 cum capacity (6 mixers) with weigh batcher as per approved mix design laid with manual means without paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion constructions and longitudinal joints joint filler seperation membrane sealent primer joint sealent debonding strip dowel bar tie rod admixture as approved curing compound finsihing to lines and grades etc., as per MoRT&H specification No. 602 (5th Revision) and as directed by the Engineer In charge for 5.50 Mts CW

Quantity260

Rate1497652

Amount 5760.2

Providing and Spreading gravel for shoulders with side slopes 2:1 in layers including sectioning each layer to proper camber, watering compaction with vibratory roller 8 to 10 tonnes capacity including the cost and conveyance of gravel to site, cost of watering etc,labour charges for operations, hire and operational charges of power roller and other T & P, diversion of traffic, etc. incluiding all taxes except GST and seigniorage charges, complete for finished item of work. as directed by Engineer - In - Charge. MORTH Spfn No:305.

Quantity75

Rate28048

Amount 373.98

ELECTRICAL INSTALLATIONS FOR EXTENSION OF POWER SUPPLY

Quantity-

Rate-

Amount -

Supply, transportation, laying and testing of XLPE insulated [IS:7098/II/85] 3 Core 35 Sq.mm HT cable for working voltage 11 kV Earthed with Stranded Compacted Circular Aluminium Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST- 2 Outer Sheathed cable etc complete. (Makes: Havells/Polycab)

Quantity150

Rate124650

Amount 831

Supply and making the following heat shrinkable terminations for 11 kV cables with required components, preparation of cable ends, testing etc., as required. [Makes: Raychem/M seal/Denson/Multy]

Quantity-

Rate-

Amount -

Indoor Type suitable for 3 Core x 35 Sq.mm XLPE insulated 11 kV cable.

Quantity2

Rate14436

Amount 7218

Outdoor Type suitable for 3 Core x 35 Sq.mm XLPE insulated 11 kV cable

Quantity5

Rate61350

Amount 12270

Supply and erection of single pole structure with 9.1 m PSCC Pole (including earthing with 25 (Width) x 4 mm (Thick) GI flat and 4 mm GI wire duly erecting 1 No. CI pipe and 2 Nos. GI pipes), 11 kV 200A AB Switch (Tilting) including polymer type insulators, erection of 11 kV H.G Fuse set with necessary materials and pole concreting, labour and transportation charges etc., complete. (Makes: As per approved vendor list of APEPDCL and the Agency is responsible for getting approval of makes and handing over of material to APEPDCL).

Quantity1

Rate44116

Amount 44116

Supply and erection of 11 kV line (Single Circuit) with 100 Sq.mm AAA Conductor over 11 m Spun Poles at 50 m Span, 100 kg/Sq.m wind pressure, working load 350 kg with necessary materials, labour and transportation charges etc., complete. (Makes: As per the approved vendor list of APEPDCL and the Agency is responsible for getting approval of make and handing over of material to APEPDCL).

Quantity0.25

Rate297409

Amount 1189638

Supply, Transportation, Installation, Testing and Commissioning of 11/0.433 kV, 160 kVA TRANSFORMER with all test reports and Agency is responsible for getting the drawing and necessary approvals from the concerned department. The Transformer shall be designed and manufactured as per BIS Energy Efficiency Level - 2 (Star-2) at basic Insulation level conforming to IS-2026 (Part-I to Part-II) with latest ammended,and as per IS-1180 (Part-I) : 2014 latest ammended, OCTC (Off-Circuit Tap Changer) with initial filling of oil as per IS-335/1993 and consultant charges for preparation of plans and obtaining necessary approvals from CEIG etc., complete. The basic details of Transformer are as under and shall be guaranteed for 5 years from the date of supply. 1. Quantity : 1 No. 2. Rated kVA : 160 kVA 3. Service & Location: Continuous Outdoor Distribution Transformer 4. Mounting : Plinth 5. Wound : Copper Double wound, 6. Type : Core type oil immersed 7. Cooling : ONAN (Oil natural air natural), 8. Temp. Rise : The temperature rise over ambient shall not exceed the limits given: 40⁰ C in oil measured by Thermometer and 45⁰ C in Winding by resistance method

Quantity1

Rate814909

Amount 814909

9. Vector Group: Dyn 11, 10. Primary Connection : Delta, 11. Nominal Voltage (HV)/Current (HV) : 11 kV/8.4 A, 12. Highest system Voltage: 12000 V 13. Primary Frequency :50 Hz +/- 3%, 14. Number of Phases : 3, 15. Primary wires: 3, 16. Secondary connection : Star, 17. Secondary Volts/Current : 433 V - 250V/213.34 A, 18. Secondary phases : 3 19. Secondary wires: 4, 20. Taps on primary winding for primary voltage variation : +5% to - 10% in steps of 2.5% of 7 position (6 Steps), 21. Terminal arrangement. a. HV: HT terminal box as per the site condition, b. LV: Cable box suitable to receive 150 Sq.mm XLPE cable, 22. LV: One separate terminal for earthing, 23. Total Losses at 50% Loading [Watts] [Max] 570 W as per IS, 24. Total Losses at 100% Loading [Watts] [Max] 1700 W as per IS 25. Percentage Impedance at 75 deg.C at 4.5% as per IS 26. No Load current: Less than 2% of full load current.

Quantity-

Rate-

Amount -

27. Standard Fittings & Accessories. a. Rating and terminal marking plate: One b. Lifting Lugs: Two c. Off-circuit tap switch :One d. Earthing Terminals : Two e. Radiators (Attachable):Adequate f. Explosion vent with Diaphragm : One, g. Conservator with Drain plug: one, h. Oil filling hole with cap : One, i. Oil level indicator : One j. Dehydrating Silica gel Breather : One, k. Terminal Arrangement: HV With Terminal Box, l. Terminal Arrangement : LV Cable Box m. Separate Neutral Bushing : One n. Drain cum filter valve with blanking plate: One, o. Air release device : One p. Thermometer Pocket : One q. Four :Unidirectional flat rollers r. One :10 cm dial thermometer (Rigid stem type) (Makes: Schneider/Kirloskar/Voltamp/ Esennar/SSE)

Quantity-

Rate-

Amount -

Providing Transformer plinth of size 1.2 m x 1.2 m x 1.5 m with necessary excavation in ground at the bottom with 150 mm thick 1:2:4 cement concrete raft at the bottom and top and 225 mm thick wall constructed in stone masonry and remaking hallow portion shall be filled with stone chips duly plastered 20 mm thick outsides including watering etc., complete.

Quantity1

Rate13747

Amount 13747

Supply, transportation, Installation, testing and commissioning of Free standing floor/plinth mounted dust and vermin proof compartmentalized LT Kiosk panel with 400A 4-Pole MCCB, Adjustable, Confirms to IEC 60947-2 and IS 13947-Part 1&2 having Breaking Capacity 36/35 kA with thermal magnetic release. The Panel shall be made of CRCA sheet, required hardware, duly painted by two coats of zinc/red oxide primer followed by Powder coated/epoxy/PU painted with phosphatisation in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness, separate detachable, gland plate M.S. base channel, hinged door with 3 nos. of 240/220 V, LED (22.5 mm dia) "Pilot lamps with integral circuits, terminal blocks" and locking arrangement for switchgear. Thickness of sheet shall not be less than 1.6 mm up to 600 mm length/width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required. Side walls and cable alley compartments having bolted type doors with detachable extension type structure. (Panel to be fabricated from CPRI approved fabricator). [MCCB Makes: L&T- D shine/Schneider-CVS/Legrand (DP X3/DRX)/Siemens-3VL]

Quantity1

Rate64186

Amount 64186

Main LT Panel Supply, fabrication, Installation, testing and commissioning of cubical type front operated, MV switch board panel, dust and vermin proof cubicle chamber for mounting and suitable for 415V, 50 Hz, AC supply including supply and erection of all Switch gears, panel fabricated with 14 SWG CRCA Sheet Steel enclosure, 16 SWG CRCA sheet steel for "internal partitions" including cutting, welding, fabrication, including internal chamber fire barriers, door with gaskets and locking facility, painting and cleaning after 7 tank process, panel or required colour paint, suitable aluminium busbars, SMC/DMC type insulators etc., as required.

Quantity1

Rate451721

Amount 451721

The panel shall be mounted on stand fabricated with M.S L-Angles of size 50 mm x 50 mm x 6 mm duly coated with standard black enamel paint. All the PCC/panels shall have at least two spare cubicles of the maximum rating. All feeders shall be earthed with 2 Nos. GI flats of adequate size to the main earth bus of 25 x 6 mm GI Flat. Panel to be fabricated from CPRI approved fabricator and shall be extendable type only with the following equipments.

Quantity-

Rate-

Amount -

Incomer : 2 nos. 400A - 36/35 kA - 4 - Pole MCCBs with suitable termination arrangements for multi-cables and rotary handles (vary depth) for EB and DG Power [Makes: L&T (D shine)/Schneider (CVS)/Legrand (DP X3/DRX)/Siemens(3VL)] Changeover : 1 no. 400 A - 4 Pole Change Over Switch on load with Open Execution as per IS:13947 [Makes: Socomec/L&T/HPL/Havells/C&S] Metering : 2 nos. Energy analyzers (multi-function energy meters) with LCD/LED display capable of minimum 20 numbers electrical parameters display with 1A/5A CT input for LV/HV network, RS 485 communication port with 240/220 V, LED (22.5 mm dia) "Pilot lamps with integral circuits, terminal blocks" for EB and DG Power. [Makes : Elmeasure/Schneider]

Quantity-

Rate-

Amount -

Energy meter compartment : Provision for mounting 6 nos. 3-Phase energy meters on Hylam Sheets. Bus-bars : 400 A and 250 A Electrolytic grade Aluminium bus-bars with SMC/DMC type insulators in required shape and size and colour coding with heat shrinkable PVC sleeves etc., complete. Outgoers MCCBs: [Makes: Legrand-DX3/Schneider-A9/Hager-h3/Siemens-5SX4] a) 250 A - 35/36 kA - 4 Pole MCCB with Spreader links and rotary handles (vary depth) - 01 no. b) 100 A - 16 kA - 4 Pole MCCB with Spreader links and rotary handles (vary depth) - 05 nos. c) 63 A - 16 kA- 4 Pole MCCB - 06 nos.

Quantity-

Rate-

Amount -

Supply and laying of 150 mm dia RCC hume pipe NP2 class in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) etc., including cost, conveyance of all materials to site and labour charges etc., complete as required.

Quantity10

Rate4850

Amount 485

STREET LIGHTING

Quantity-

Rate-

Amount -

Supply, fabrication, transportation and erection of single section hot dip galvanized continuously tapered 7.5 m long Octagonal Pole with 1.0 m long single arm bracket fabricated from MS galvanized pipe of 40 mm dia (NB) suitable to withstand wind speed of 180 kmph with BSEN-10025 grade S 355 JO steel plate for shaft (3 mm thick), bottom dia. of 130 mm A/F, top dia. 70 mm A/F, Steel plate conforming to IS 2062 for base plate of size 220 mm (L) x 220 mm (B) x 12 mm (T) welded to bottom of the pole with reinforced camouflaged junction box and weather proof door with opening arrangements incorporating 6A-10 kA-SP MCB, 63A/500 V-4 Way Bakelite power block connector etc., mounted on 3 mm thick Hylam/Bakelite Sheet, including excavation of pit in soil to a depth of 1.00 m for casting M 20 grade vibrated cement concrete pedestal of size 0.45 m (Length) x 0.45 m (Breadth) x 1.2 m (Height) with TMT Steel reinforcement of "Fe 500 D" grade weighing around 10 kg having Main Vertical Reinforcement shall be in 8 nos. bars of 10 mm

Quantity18

Rate441702

Amount 24539

dia and Shear Reinforcement (Stirrups) shall be in 8 nos. bars of 8 mm dia @ 140 mm C/C duly embedded with 4 nos. of M 20 x 700 mm long 'J' type Anchor bolts (EN 8 grade), and 1.2 m long 78 mm OD/63 mm ID DWC HDPE pipe for entry and exit of UG cable, curing for 7 days, and labour charges for erection of pole on pedestal with M 20 nuts and M 20 plane washers, maintaining pole number and circuit number on pole and filling up the space between Base Plate and Top of Pedestal with Cement Concrete blocking access via the pole to prevent rodents and other critters etc., as directed by field engineers during execution for finished item of work, including cost of all materials, conveyance to site, centering, hire, operational charges of all T&P, labour for fabrication and other operations etc., complete. [Octagonal Pole makes: Bajaj/Valmont]

Quantity-

Rate-

Amount -

Supply, installation, testing and commissioning of 60 W rated power (max.) LED Street light luminaire with housing fabricated from Pressure die cast or extruded Aluminium with a grey paint/powder coating, an extra clear toughened glass/PC diffuser, Mech. impact resistance IK ≥ 07 [2 J reinforced], Conforming to IP66 [Dust penetration-protected, jet-proof], Protection class IEC : Safety Class-I, High power LEDs with Secondary optic lens achieving overall system efficacy 120 lm/W @ CCT 5700 K (ANSI), CRI (Ra) ≥ 70, Junction temp. 70 deg. C, Optic Type Outdoor : Distribution Symmetric Wide, Beam angle of light source: 120 Degrees, Luminaire light beam spread 130° x 88°, lifetime residual flux of 70% (L70) @ 50,000 burning hours at Ta = 30 deg. C, powered by BIS certified Potted (Constant Current) Driver having efficiency 90%, input voltage : 120 V-270 V AC, freq.: 50/60 Hz, P.F 0.9, T.H.D 10% at 110 V AC, internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes) with luminaire performance complying to

Quantity18

Rate130410

Amount 7245

IS 10322 (Part 5/Sec-3) with warranty not less than two years etc., compatible for mounting on pole bracket along with run of 1.1 kV grade PVC insulated 3 Core x 1.5 Sq.mm Sheathed flexible copper cable as per IS 694/1990 for extn. of supply with earth connection as required including cost of all materials, conveyance, labour and incidental charges etc., complete.

Quantity-

Rate-

Amount -

[a) LUMINAIRE MAKES : Wipro (Skyline Plus)/Signify(City Star)/GE-Venture (Blue Hill-R1)/Crompton (Raptor Neo)/Kesslec; b) LED MAKES : PHILIPS LUMILEDS/ CREE/NICHIA/OSRAM/ SAMSUNG/LG; 3 Core x 1.5 Sq.mm Wire: Finolex/Polycab/ Havells]

Quantity-

Rate-

Amount -

Supply and fixing of Outdoor type, Stand Mounting, Fire Retardant, Dust, Water and Vermin Proof "Feeder Pillar" having dimensions of at least 700 mm (L) x 300 mm (B) x 650 mm (H) offering IP 55 protection as per IS 12063 fabricated out of 14 SWG CRCA Sheet steel with powder coating after 7 tank process, with canopy, hinged door with pad-locking arrangement for Switch gear, detachable type gland plate, PU/Neoprene rubber gasket of not less than 3 mm thickness, 2 nos. 12 mm dia bolts as earth terminals, suitable for 433 Volt +/- 10%, 50 Hz +/- 5%, 3 Phase-4 wire system incorporating electrical accessories such as 40 A-10 kA Four Pole MCB as Incomer, 32 A-3-Pole Power Contactor, Analog Timer equipped with built-in battery charged by the network voltage, 9 nos. 20 A-10 kA SP MCBs as outgoers, LED Phase (R, Y, B) Indicators, 10 A Rotary Switch (1 Pole 2 Way), 4 nos. 4-Way 63A/500 V Bakelite Power Block Connectors, 100 A Brass Neutral link,

Quantity1

Rate52023

Amount 52023

4 Pole-4 Module-(Imax) 15 kA, (UP) 1.2 kV Voltage Surge Protector conforming to IEC/EN 61643-11, 32 A -10 kA FP MCB (C Curve), and Overvoltage release, 230 V AC, U 275 AC, 3 Phase in 1 module suitable for 3 Ph+N etc., pre-wired with suitable PVC Insulated flexible copper wires terminated upto terminal blocks with insulated lugs of appropriate size etc., with frame mounted on stand fabricated from MS L-Angles 40 mm x 40 mm x 5 mm with 4 legs each of 1000 mm height duly coated with standard black enamel paint and grouting the MS angle frame in cement concrete and providing 1 no. G.I Pipe

Quantity-

Rate-

Amount -

pit with 2.5 m long - 40 mm dia - Medium Grade G.I pipe as per IS Specifications as directed by the Engineer-In-Charge, including cost, conveyance of all materials, and labour charges etc., complete (only outer area on all sides shall be measured and panel to be fabricated from CPRI approved fabricator) [Switch/Power/Control gears makes: Legrand/Schneider/L&T/ ABB/Hager]

Quantity-

Rate-

Amount -

Providing coil earthing with 8 SWG (4.0 mm) soft GI wire (Hot Dip Galvanized) closely wound with min. 115 turns (length of coil: 450 mm, external dia of coil: 50 mm) having min. coil weight of 1.85 kg, 2.50 m free length of GI Wire at one end coil and filling with bentonite powder up to 1200 mm (71.0 kg) from the bottom of excavated pit of 350 mm dia dugout by Auger to a depth of 1500 mm at a distance of 1.2 m away from pole, filling up the balance space of 300 mm with excavated soil as indicated in the drawing enclosed in the tender schedule

Quantity36

Rate53928

Amount 1498

Excavation of earth for a trench of size 0.3 m (Width) x 0.9 m (Depth) x 1.0 m (Length) in soil for laying HDPE pipe and refilling the trench with excavated soil to original position, including cost, conveyance, and labour charges etc., complete.

Quantity1000

Rate118000

Amount 118

Cutting of Bituminous road (BT) for laying HDPE/G.I Pipes along the trench at a depth of 600.00 mm and width of 300 mm, including clearing the site by removing debris and making the site to original position, including all incidental expenses etc., complete.

Quantity2

Rate3882

Amount 1941

Supply, transportation and laying of the following double walled corrugated (DWC) HDPE pipe having corrugation on the outer wall and plain surface inner wall conforming to BSEN-500 86/IS : 14930 Part - II along the cable trench dug out in soil for safeguarding UG cable with all accessories like couplers, bends, end caps, Tees etc., complete, including cost, conveyance, and labour charges etc., complete but, excluding charges for soil excavation and back filling charges. [Makes : DURA LINE (Dura Guard) or approved equivalent]

Quantity-

Rate-

Amount -

50 mm outer dia and inner dia 38 mm

Quantity600

Rate82200

Amount 137

78 mm outer dia and inner dia 63 mm

Quantity200

Rate41000

Amount 205

Supply, transportation and laying of the following XLPE insulated 1100 V grade Armoured Aluminium UG cable as per specification conforming to IS: 7098 (Part-I)/1554-I in existing G.I/HDPE pipe laid along the dug out cable trench including cost, conveyance, testing, and labour charges etc., complete. [Makes: Havells/Polycab]

Quantity-

Rate-

Amount -

10 Sq.mm x 4 core

Quantity800

Rate176800

Amount 221

16 Sq.mm x 4 Core

Quantity100

Rate25500

Amount 255

25 Sq.mm x 3.5 Core

Quantity50

Rate15350

Amount 307

150 Sq.mm x 3.5 Core

Quantity80

Rate91600

Amount 1145

Supply and making end termination with heavy duty Aluminium lugs (pin/ring type) as per IS specification duly crimped with crimping tool, PVC tape etc., for the following XLPE insulated 1100 V grade Armoured Aluminium UG cables. [Makes : Dowells/Jainson/Comet]

Quantity-

Rate-

Amount -

10 Sq.mm or 16 Sq.mm

Quantity100

Rate1400

Amount 14

25 Sq.mm

Quantity8

Rate176

Amount 22

Supply and making heat shrinkable terminations for 150 Sq.mm x 3.5 Core XLPE insulated 1.1 kV cable with required components, preparation of cable ends, testing etc., as required. [Makes: Raychem/M seal/Denson/Multy]

Quantity4

Rate20208

Amount 5052

Supply and making one end termination with heavy duty single compression brass gland as per BS 6121:2005, IP 66 complete, SIBG type, heavy duty Aluminium lugs duly crimped with crimping tool, PVC tape etc., for the following Armoured XLPE Aluminium cable of 1100 Volt grade. [Makes: Dowells/Comet/SMI]

Quantity-

Rate-

Amount -

4 Core x 10 Sq.mm or 16 Sq.mm

Quantity4

Rate468

Amount 117

3.5 Core x 25 Sq.mm

Quantity4

Rate548

Amount 137

3.5 Core x 150 Sq.mm

Quantity4

Rate4948

Amount 1237

Supply and laying of 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs etc., complete for entry of cable along road crossings/central median at a depth of 900.00 mm and at culvert crossings wherever necessary including cost, conveyance of all accessories and labour charges etc., complete. [Makes: Tata/Zenith or approved equivalent]

Quantity20

Rate18380

Amount 919

Laying cement concrete of M 20 grade using 20 mm & 10 mm HBG machine crushed stone aggregate (coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) for trenches dug across B.T roads including cost, conveyance of all materials to site and labour charges, machine mixing, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per MoRT&H specification 1500, 1600, 1700 & 2100 (5th revision) and as directed by the Engineer-in-Charge.

Quantity2

Rate12384

Amount 6192

Laying Plain Cement Concrete (1:4:8) mix using 40 mm size HBG machine crushed stone aggregate and fine aggregate and confirming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500, 1700, 2100 (5th Revision) and as directed by the Engineer-In-Charge for trenches dug across BT road.

Quantity2

Rate9890

Amount 4945

FIRE FIGHTING & FIRE ALARM SYSTEM

Quantity-

Rate-

Amount -

Providing, laying, testing & Commissioning of the following classes MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete including labour charges etc., complete for finished item of work as directed by Engineer - In - Charge. [Makes: Jindal/Hissar/Tata pipes]

Quantity-

Rate-

Amount -

200 mm dia B class

Quantity300

Rate1259100

Amount 4197

150 mm dia B class

Quantity900

Rate2614500

Amount 2905

100 mm dia B class

Quantity600

Rate1162200

Amount 1937

80 mm dia B class

Quantity200

Rate274400

Amount 1372

Supply, installation, testing and commissioning of electric driven main fire pump suitable for automatic operation and consisting of the following : complete in all respect as required. a) End suction back pull out centrifugal pump, Std fitted with BRONZE IMPELLER & gland packing ,capacity 97 Cum/hr (1620 LPM) at total head 56 mwc at operating speed 2900 rpm. Pump duty as per TAC. b) 30 kW/40 HP, 3000 r.p.m, TEFC (IP55) horizontal foot mounted, squirrel cage induction motor, suitable for 415 volts +/- 10%, 3 Ph, 50 Hz +/-5%, A.C supply. Class ‘F’ insulated and suitable for ambient temperature up to 50 deg C. Motor in frame SC 250 M frame for driving above pump. c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc., as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. [Pumps: Kirloskar/Mather&Platt; Motors: Siemens/ABB/Kirloskar]

Quantity1

Rate205456

Amount 205456

Supply, installation, testing and commissioning of electric driven pressurisation/Jockey pump suitable for automatic operation and consisting of following : complete in all respect as required. a) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 180 lpm at 56 Mtr head conforming to IS 1520 b) Suitable HP SQ cage induction motor TEFC type suitable for operation on 415Volts, 3 phase 50 Hz. AC with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. [Pumps : Kirloskar/Mather & Platt; Motors : Siemens/ABB/Kirloskar]

Quantity1

Rate69912

Amount 69912

Supply, installation, Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respects as required. a) End suction back pull out pump, Std fitted with BRONZE Impeller & gland packing, capable of delivering 97 Cum/hr(1620 LPM) at a total head of 56 M when operated at 2150 rpm and pump duty as per TAC b) Liquid cooled, 50 BHP at 1800 rpm, Diesel engine (Radiator cooled) 12 Volts starting system with standard accessories. c) M.S. Fabricated common base plate, coupling, coupling guard, foundation bolts etc as required. d) Suitable cement concrete foundation duly plastered with anti vibration pads. [Engines : Kirloskar/Cummins; Pumps :Kirloskar/Mather&Platt]

Quantity1

Rate496518

Amount 496518

Fabrication, supply, transportation, installation, testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete with following incoming and Outgoings, suitable for operation on 415V, 3 phase, 50 Hz AC Supply. [MCCBs: L&T- D shine/Schneider-NS NSX/Legrand -DP X3/Siemens-3VL/Hager-h3/C&S -Winbreak2] [Meters : Schneider (Conzerve)/L&T/Elmeasure/Siemens]

Quantity1

Rate303106

Amount 303106

INCOMING : 250A, 50 kA 4 Pole MCCB, Ics=100% Icu rating. Digital Voltmeter (0-500V) with selector switch. Digital Ammeter (0-250 A) with selector swtich & CTs etc., LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING : (Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) MAIN FIRE PUMP 125 A, 50 kA TPN MCCB, Ics = 100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation selector switch for local/remote, auto/manual/OFF operation.

Quantity-

Rate-

Amount -

JOCKEY PUMP 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for ocal/remote, auto/manual/OFF operation. DIESEL ENGINE CONTROL Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Water Temp and Engine on indication. Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC Voltmeter, and 0- 20 A DC Ammeter. All standard relays and accessories for automatic operation of diesel engine System Controller.

Quantity-

Rate-

Amount -

Supply and fixing of single headed Internal/External hydrant valve with instantaneous Gun metal/Stainless steel couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required. [Makes: Newage/Winco/Safex/Minimax/Honeywell]

Quantity16

Rate172752

Amount 10797

Supply, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. [Makes: Audco/Kirloskar/Leader/Zolotto/Honeywell]

Quantity-

Rate-

Amount -

200 mm dia

Quantity2

Rate14496

Amount 7248

150 mm dia

Quantity160

Rate970240

Amount 6064

100 mm dia

Quantity4

Rate18636

Amount 4659

80 mm dia

Quantity30

Rate128670

Amount 4289

Providing, installation, testing and commissioning of dual Plate non - return valve of the following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required [Makes: Leader/Zolotto/Honeywell]

Quantity-

Rate-

Amount -

200 mm dia

Quantity1

Rate13608

Amount 13608

150 mm dia

Quantity2

Rate19524

Amount 9762

Supply and fixing of 63 mm dia, 15 m long RRL hose pipe with 63 mm dia Male and Female SS Couplings duly binded with GI wire, rivets etc., conforming to IS 636 (Type -A) as required. [Makes: Newage/Winco/Safex/Minimax/Honeywell]

Quantity32

Rate198784

Amount 6212

Supply and fixing 4 way fire brigade connection of cast iron body with 4 nos. Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required. [Makes: Newage/ Winco/Padmini/Safex/Minimax]

Quantity10

Rate118320

Amount 11832

Supply, installation, testing and commissioning of 150 mm dia Stainless Steel Y – Stainer fabricated out of 1.6 mm thick SS 304 conforming to IS specifications complete with rubber gasket, GI bolts, nuts, washers etc., as required [Makes: Leader/Zolotto/Honeywell]

Quantity2

Rate23664

Amount 11832

Supply and fixing of hose cabinet of size 750 mm X 600 mm x 250 mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required. [Makes: Minimax/Safex/Newage/Winco]

Quantity16

Rate68624

Amount 4289

Supply and fixing of 63 mm dia Gun metal branch pipe with 20 mm (Nominal internal diameter) size Gun metal nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required. [Makes: Newage/Winco/ Safex/Minimax]

Quantity16

Rate52064

Amount 3254

Providing and fixing of Pressure Switch in the MS pipe Line including connection etc as required. [Makes : Danfoss/Indfoss/System Sensor/Honeywell]

Quantity1

Rate3235

Amount 3235

Supply, installation, testing and commissioning of Bourden type, stainless steel dial type pressure gauge with isolation valve and pipe having calibration of 0-16 kg/Sq.cm [MAKES: HGURU/FIEBIG]

Quantity8

Rate6896

Amount 862

Supply, installation, testing and commissioning of 25 mm dia Gate valve [Makes : Zoloto/Leader/SANT/NEU-G]

Quantity2

Rate3106

Amount 1553

Supply, installation, testing and commissioning of 25 mm dia Ball valve [Makes: Zoloto/Leader/SANT/NEU-G]

Quantity2

Rate1716

Amount 858

Providing, fixing, testing & commissioning, installation of 150 mm dia control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc., as required : [Makes : HD/TYCO/NEWAGE]

Quantity2

Rate118324

Amount 59162

Supply, installing, testing and commissioning of 150 mm nominal dia CI body Foot Valve with brass strainer with necessary flanges, nuts and bolts etc., complete on to the suction line. [Makes: Normex/SANT]

Quantity2

Rate35498

Amount 17749

Supplying and wrapping the anticorrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm overlap as per specification. [Make: IWL (PIPE KOT) or its equivalent]

Quantity-

Rate-

Amount -

200 mm dia

Quantity200

Rate118400

Amount 592

150 mm dia

Quantity200

Rate88800

Amount 444

100 mm dia

Quantity50

Rate20000

Amount 400

80 mm dia

Quantity50

Rate17050

Amount 341

Supply, fabricating , installing structural steel supports for fixing all sizes of MS pipes from ceiling / wall with MS Channels, Angles, Flats, Rods, as required at site with anchor fasteners, Clamps, threaded rods, nuts, bolts,washers etc complete with painting including labour charges etc complete for finished item of the work as directed by Engineer-in-Charge

Quantity1200

Rate146400

Amount 122

CONVENTIONAL - FIRE ALARM SYSTEM

Quantity-

Rate-

Amount -

Supply, Installation, testing and commissioning of conventional Micro processor based Fire Alarm panel with 6 Zone, 12V SMF batteries etc., complete with all standard accessories etc., Complete. [Makes: System Censor /Ravel/Vertex]

Quantity2

Rate43116

Amount 21558

Supply and installation of dust and vermin proof manual call point to initiate audio visual alarm including the cost of mounting accessories complete as per specifications and as required etc., Complete. (Makes: System Censor/Ravel/Vertex)

Quantity20

Rate17240

Amount 862

Supply and installation of duel tone electronic hooter of 85 dB including the cost of mounting accessories complete as per specifications and as required etc., Complete. (Makes: System Censor/Ravel/Vertex)

Quantity2

Rate2156

Amount 1078

Supply and installation of plug-in-type multi-criterion detectors including the cost of base plate. 75mm dia M.S. outlet box for fixing of the detector base. Mounting accessories etc., complete as per specifications as required. [Makes: System Censor/Ravel/Vertex]

Quantity2

Rate4600

Amount 2300

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approvedsource having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials etc,. complete.

Quantity2

Rate22586

Amount 11293

Fire Extinguishers

Quantity-

Rate-

Amount -

Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2 mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation, all taxes and all labour charges etc complete. [Makes: Safex/Kanex/Bharat/Reliance/NewTech]

Quantity4

Rate32612

Amount 8153

Supply and fixing of CO2 type Fire Extinguishers 4.5 kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1.0 m discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used un-used indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warrantyIncluding transportation, all taxes and all labour charges etc., complete. [Makes: Safex/Kanex/Bharat/Reliance/NewTech]

Quantity4

Rate49024

Amount 12256

Supply & fixing of 4 nos. of 9 lts capacity round bottom sand buckets along with bucket sand, fire buckets with round bottom type, enamel painted white inside and red outside & letter fire in black outside & handle with mounting bracket along with suitable MS stand to install the buckets as per the local fire standards.

Quantity4

Rate11992

Amount 2998

Supply and fixing of PVC synthetic elastomer electrically insulated mat conforming to IS: 15652-2006 with Class B insulation having 2.5mm thickness upto 11 kV

Quantity2

Rate10722

Amount 5361

Supply & Delivery of 11 kV/22 kV hand gloves

Quantity2

Rate550

Amount 275

Supply & fixing of 18" x 12" x 8" size First Aid box.

Quantity2

Rate550

Amount 275

Supply and fixing of Escape signage board in Rigid Photo luminecent based glow in Dark rigid sheet with high intensity luminous properties with specificaiton. [Makes: Cease Fire or its equivalent make Model-1ES01]

Quantity5

Rate8623

Amount 1724.67

Supply, transportation and run of 2 core 1.5 sq.mm XLPE/PVC insulated & PVC sheathed armoured cables of 1.1 kV grade with copper conductor as per IS 7098 Part-I -1988 etc complete. (Make: Universal/Havells/KEI/Polycab)

Quantity1200

Rate152400

Amount 127

Internal Wiring:

Quantity-

Rate-

Amount -

Supply and fixing of 20 mm outer dia (1.40 -1.55) mm thickness MEDIUM grade PVC conduit pipe with IS:9537 Part-3 FRLS rigid PVC pipe (ISI Mark) concealed in wall/run on surface above false ceiling if necessary with all required accessories including chisiling the wall wherever necessary, masonry work for Light/Fans/exhaust fan points/call bell points and separate plug points & including all labour charges etc., complete. [Makes: Sudhakar/Precision/GM/ Polycab/AKG]

Quantity500

Rate50000

Amount 100

Supply and run of 25 mm outer dia (1.60 - 1.80) mm thick ISI marked Medium grade with IS:9537-part 3 rigid PVC Conduit concealed in wall/slab with all required accessories, including chisiling the wall wherever necessary, masonry work for Light/Fans/Exhaust fan points and Seperate plug points, including cost, conveyance and labour charges with all incidental expenses etc., complete [Makes: Sudhakar/Precision/GM/ Polycab/AKG]

Quantity1000

Rate112000

Amount 112

Supply and run of 32 mm outer dia (1.90 - 2.10) mm thick ISI marked Medium grade with IS:9537-Part 3 rigid PVC Conduit concealed in wall/slab with all required accessories, including chisiling the wall wherever necessary, masonry work for Light/Fans/Exhaust fan points and Seperate plug points, including cost, conveyance and labour charges with all incidental expenses etc., complete. [Makes: Sudhakar/Precision/GM/ Polycab/AKG]

Quantity250

Rate29250

Amount 117

Wiring with 3 runs of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R.L.S flexible copper wires (ISI MARK) of 1100 V grade as per IS: 694/1990 & IS:17048/2018 as phase, neutral and earth in existing pipe with 6A/10A-1 Way-1 Module Modular Switch, 3 Plate Jumbo ceiling rose, and 8 Modular Horizontal/Vertical Cover plate (frame) covering to 8/9 module Hot dip Galvanized 18 SWG GI Module Switch Control box with earthing terminal, including cost, conveyance and labour charges etc., complete for light, fan and exhaust fan points in non residential buildings. [Cable makes: RR kabel/Havells/Polycab; Switches/GI Box/Frame makes: Legrand (Arteor/Myrius)/Schneider (Clipsal X/Livia AB)/Goldmedal (GIFA)]

Quantity100

Rate117300

Amount 1173

Supply and fixing of 6A/10A - 3/2 Pin 2 Module Modular Socket with Shutter with 6A/10A -1 Way 1 Module Modular switch control on a common switch board including cost, conveyance and labour charges etc., complete. [Makes : Legrand (Arteor/Myrius)/Schneider (Clipsal X/Livia AB)/Goldmedal (GIFA)/Crabtree (Murano/Athena)]

Quantity10

Rate3270

Amount 327

Supply and fixing of 3 Nos. 6A/10 A - 3/2 Pin 2 Module Modular Socket with Shutter pin with 2 Nos. 6A/10A, 1 Way, 1 Module, Modular Switches mounted on 8/9 module Hot Dip galvanized 18 SWG Module metal box with earthing terminal and covered with an appropriate modular cover frame, including cost, conveyance and labour charges etc., complete. [Makes : Legrand (Arteor/Myrius)/Schneider (Clipsal X/Livia AB)/Goldmedal (GIFA)/Crabtree (Murano/Athena)]

Quantity6

Rate6996

Amount 1166

Supply and fixing 2 nos. of 20 A Modular Sockets with shutter and 2 nos. of 16A/20A, 1 Way 1 Modular switches mounted on 6 module Hot Dip galvanized 18 SWG Module metal box for Switch Board with earthing terminal and covered with an appropriate modular cover frame, including cost, conveyance and labour charges etc., complete. [Makes: Legrand (Arteor/Myrius)/Schneider (Clipsal X/Livia AB)/Goldmedal (GIFA)/Crabtree (Murano/Athena)]

Quantity6

Rate6696

Amount 1116

Supply and run of the following ISI marked FRLS/FRLS-H/HFFR/ZHFR PVC insulated flexible copper wires of 1100V grade as per IS: 694/1990 IS:17048/2018 Specifications for Phase, Neutral and Earth in existing PVC conduit for mains/circuit mains including labour charges etc., complete [Makes: RR kabel/Havells/Polycab/RR Kabel]

Quantity-

Rate-

Amount -

2 x 2.5 Sq.mm (P, N) + 1 x 1.5 Sq.mm (E) copper wires with colour coding

Quantity600

Rate72600

Amount 121

2 x 4 Sq.mm (P, N) and 1 x 2.5 Sq.mm (E) copper wires with Colour Coding

Quantity300

Rate53700

Amount 179

2 x 6 Sq.mm (P, N) and 1 x 4 Sq.mm (E) copper wires with Colour Coding

Quantity100

Rate24900

Amount 249

4 x 4.0 Sq.mm (R, Y, B, N) + 1 x 2.5 Sq.mm (E) copper wires with Colour Coding

Quantity1000

Rate279000

Amount 279

4 x 6 Sq.mm (R, Y, B, N) + 1 x 4 Sq.mm (E) copper wires with Colour Coding

Quantity500

Rate195000

Amount 390

4 x 10 Sq.mm (R, Y, B, N) + 1 x 6 Sq.mm (E) copper wires with Colour Coding

Quantity200

Rate116600

Amount 583

Supply and fixing of 18-20W not less than 1100 mm length LED batten light with extruded Aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having system efficacy 120 lumens/watt, PF 0.9, Surge protection: 2 kV, THD 15%, with inbuilt driver and frosted cover CCT: 5700 K, minimum CRI 70 etc., complete on wall/ceiling with Teak Wook/PVC round blocks with all accessories, giving connections as required with 23/0060 twin core twisted/flat heavy Copper wire, earth connection including cost, conveyance, labour charges and warrenty not less than two years. [a) Luminaire makes : Philips (Signify)/Crompton/Wipro; LED makes: Philips lumileds/Cree/Nichia/Osram]

Quantity72

Rate67824

Amount 942

Supply, installation, testing and commissioning of 48" (1200 mm) Sweep Ceiling Fan with double ball bearings, air delivery more than 200 cubic meter/min etc., with 2 Module Modular type Electronic step type Fan Regulator, Anchor fastener with fan hook/providing MS Fan hook with grouting and cement plastering, including cost, conveyance and labour charges for fixing ceiling fan, regulator and giving connections with 23/0060 Twin Core Twisted wire/flat heavy Copper wire etc., complete. [Makes : Crompton HS Plus/Havells ES PLUS/Orient Energy Star/Halonix (Zephyr)]

Quantity10

Rate35040

Amount 3504

Supply, installation, testing & Commissioning of 12" (300 mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades, GI Louver shutter including cost, conveyance and labour charges for fixing exhaust fan in wall with necessary connections and masonry work of making hole, finishing etc., complete. [Makes: Crompton/Almonard/Havells Ventil Air DB]

Quantity6

Rate27678

Amount 4613

Supply and fixing of 4 Way TPN Horizontal Distribution board with IP-43 protection suitable for 1 No 63 A FP Isolator as Incomer and 6 Nos. - 10 kA - (6-32) A range SP MCBs (C-Curve) as outgoers as per IS 8623; IS 13032; IEC 61439-3 including cost, conveyance and labour charges for surface/flush mounting with internal connections etc., complete for Lighting. [Makes: Legrand (Ekinox 3)/Schneider-Acti9/Hager-Novello+/Seimens/L&T-Newrange]

Quantity3

Rate24576

Amount 8192

Supply and fixing of 4 Way VTPN Distribution board with IP-43 protection suitable for 1 No. 100 A FP Isolator as Incomer and 1 no. 40 A -10 kA TP MCB, 1 no. 32 A - 10 kA TP MCB, 6 Nos. (6-32) A range 10 kA SP MCBs (C-Curve) as Outgoers with Bus-bar arrangements as per IS 8623; IS 13032; IEC 61439-3 including cost, conveyance and labour charges for surface/flush mounting with internal connections etc., complete. [Makes: Legrand (Ekinox 3)/Schneider-Acti9/Hager-Novello+/Seimens/L&T-Newrange]

Quantity4

Rate69172

Amount 17293

Supply, transportation & installation of the following Hot Dipped Galvanized Iron perforated cable trays with cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling/Wall with suspenders etc., complete

Quantity-

Rate-

Amount -

450 mm x 50 mm x 2.0 mm

Quantity50

Rate85500

Amount 1710

300 mm x 50 mm x 1.6 mm

Quantity10

Rate11800

Amount 1180

Providing independent earthing by excavating a pit to a depth of 2.10 m with 0.30 m dia in soil using 40 mm dia 'B' class GI pipe as per IS 1239 (ISI mark) of 2.5 m length with tapered casting at the lower end having staggered holes, filling up the surrounding space around the pipe with Bentonite powder of 77 kg up to 1.8 m from the bottom and remaining space of the pit with loose earth and fixing hume pipe ring (3 mm Thick) with necessary accessories and proper connections including cost, conveyance of all materials, and labour charges etc., complete.

Quantity8

Rate21512

Amount 2689

Providing independent earthing with 100 mm dia Heavy gauge C.I (Cast iron) pipe with Flange 2.5 m long enclosed in C.C/brick masonry chamber of 450 mm x 450 mm x 400 mm with R.C.C Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 mm (Width) x 6 mm (Thick) of 200 mm length with all accessories and labour charges etc., complete, as per IS specifications 732/1982 (Part II) for Distribution Transformer.

Quantity2

Rate20622

Amount 10311

Providing independent earthing as per IS 3043 with Copper earth plate of size 600 mm (L) x 600 mm (B) x 3.15 mm (Thick) by embodying 3.0 m to 4.0 m below the ground level with 40 mm dia 'B' Class G.I Pipe with staggered holes and tapered bottom by excavating a pit to a depth of 3 to 4 m in all soils for Sophisticated Electronic equipment as per National Electric Code and earth connection from electrode Copper strip of 25 mm x 5 mm of 200 mm length to be bolted with nut bolts to G.I. pipe including 25 mm x 3 mm copper strip of 6.0 m length connected from plate to Copper strip including filling with 20 kg Salt and 40 kg Charcoal in layers of 150 mm height or 40 kg bentonite powder including all accessories like nuts bolts reducer, nipple, wire meshed G.I funnel and CC finished chamber of width: 320 mm, Length: 320 mm, Height: 192 mm, Weight 30 kg and load bearing Capacity: 5000 kg, covered with SMC-Fibre Reinforced Polymer (FRP) 5 Tons capacity manhole cover of size 300 X 300 mm, including cost, conveyance and labour charges etc., complete.

Quantity4

Rate82008

Amount 20502

Providing earth electrode of low carbon steel rod, UL listed of 17.2 mm dia, 3 m long, coated with copper of 254 microns thickness, CPRI tested for short time current withstand test of 25 kA, coating thickness, environmental test (Salt Mist Test), Bend test, Tensile strength, Yield/tensile ratio, Electrical Resistivity test, complete with clamps and 2 bags of (Earth plus ULTRA/TIRUMALA) high grade earthing compound IEC 62561-7 complaint Eco-friendly, Maintenance free, anti-corrosive, lead-free, super conductive, mineral based high-grade earthing compound, to enhance soil conductivity. With resistance 0.20 ohms-meter, should be leach proof & Sulphur free complete with earth inspection chamber of dimensions: width: 320 mm x 320 mm, Height : 192 mm, weight : 30 kg, Load bearing capacity : 5000 kg.

Quantity2

Rate26120

Amount 13060.04

Supply and laying of the following sizes of Copper or G.I earth wire/strip in horizontal/Vertical run in Ground/surface/Recess including, revitting, soldering, saddles, making connections etc., as required.

Quantity-

Rate-

Amount -

8 SWG G.I Wire (0.104 kg/m)

Quantity20

Rate220

Amount 11

25 mm x 3 mm GI Flat (0.656 kg/m)

Quantity100

Rate6200

Amount 62

25 mm x 3 mm Copper Flat (0.663 kg/m)

Quantity20

Rate12020

Amount 601

Supply and installation of 10 W LED Bulkhead fitting with Pressure die cast aluminum with opal diffuser with IP 65 protection etc., complete. [Makes : Philips/Crompton/Havells ]

Quantity3

Rate3531

Amount 1177

Supply, Installation, Testing and Commissioning of Electric Traction Passenger cum Stretcher Lift with rated capacity : 10 Passenger, Floors :- G+2 floor (3 Stops/3 Landings), Travel height :- 8 m, Location of Lift Machine:- Machine-room-less (MRL), Rated speed :- 1.0/1.25 mps, Doors type : COP/TOP Doors with frame having clear opening of 800 mm (wide) x 2000 mm (high) made from SS 304 grade sheet of 1.5 mm thick in hairline finish for car and all landing doors with SS door architraves/frames, Lift car enclosure made from SS 304 grade sheet of 1.5 mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & 20 mm Recess with Granite flooring, 3 nos. handrails, mirror, emergency light etc., COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Telugu & English with intercom system with telephone

Quantity1

Rate1959902

Amount 1959902

instrument in Lift car, LMR & FCC/ground floor. Clear Car size of 1100 mm (Wide) x 2000 mm (Depth) LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. Lift controller based on microprocessor/PLC with VVVF (VARIABLE VOLTAGE VARIABLE FREQUENCY) Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5 mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries.

Quantity-

Rate-

Amount -

Fireman controller having fireman switch at fire Landing. Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery. adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. Lift shaft available having clear size of 1800 mm (Width) x 2300 mm (Depth) (Makes: SCHINDLER/MITSUBISHI/JOHNSON)

Quantity-

Rate-

Amount -

Supply, Installation, Testing and Commissioning of Electric Traction Goods lift with rated capacity of 884 kg Goods, Floors :- G+2 floor (3 Stops/3 Landings), Travel height :- 8 m, Location of Lift Machine:- Machine-room-less (MRL). • Rated speed :- 0.6 to 1.0 mps. • Car Doors type :- COP (Cabin Operating Panel)/TOP (Telescope Operating Panel) Doors with frame having clear opening of 800 mm (wide) x 2000 mm (high) made from SS 304 grade sheet of 1.5 mm thick in hairline finish for car and all landing doors with SS door architraves/frames. • Lift car enclosure made from SS 304 grade sheet of 1.5 mm thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, 3 nos. handrails, mirror, emergency light etc., • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch,

Quantity1

Rate1483051

Amount 1483051

OWD with audio-visual alarm, VAS (Volume Announcement System) in Telugu & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor • Clear Car size of 1100 mm (Wide) x 2000 mm (Depth) • LOP (Landing Operating Panel) with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.

Quantity-

Rate-

Amount -

• Lift controller based on microprocessor/PLC with VVVF (VARIABLE VOLTAGE VARIABLE FREQUENCY) Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5 mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries. • Fireman controller having fireman switch at fire Landing

Quantity-

Rate-

Amount -

• Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc., erected with necessary steel work. • Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT. • Lift shaft available having clear size of 1800 mm (Width) x 2300 mm (Depth) (Makes: SCHINDLER/MITSUBISHI/ JOHNSON)

Quantity-

Rate-

Amount -

No. of BOQ items: 147(One hundred forty seven) only

Quantity-

Rate84366460

Amount -

(Rupees Eight Crores Forty Three lakhs Sixty Six thousand Three hundred and Sixty Only)

Quantity-

Rate-

Amount -

307 More

Evaluation Notes How It Works ?

Partners

Payment Type

Bank Certification Amount

Bank Guarantee Amount

Additional Info 1

Additional Info 2

Additional Info 3

Additional Info 4

Remarks

Potential Partner

Select Your Requirements

Help me get relevant partners for joint bidding

Help me get relevant material suppliers

Help me get project financing

Andhra Pradesh Industrial Infrastructure Corporation Tender

Andhra Pradesh Industrial Infrastructure Corporation - APIIC Tender

Costs

EMD

Document Cost

Tender Fee

Description

Contact

Tender Id

Tender No

Tender Authority

Purchaser Address

Website

BOQ Items

Potential Partner

TENDER BY COUNTRIES

United States Tenders|

United Kingdom Tenders|

Spain Tenders|

France Tenders|

Qatar Tenders|

Australia Tenders|

Canada Tenders|

China Tenders|

Malaysia Tenders|

Maldives Tenders|

Singapore Tenders|

Bangladesh Tenders|

Ethiopia Tenders|

Bhutan Tenders|

Kuwait Tenders|

Oman Tenders|

Germany Tenders|

Egypt Tenders|

Ghana Tenders|

Saudi Arabia Tenders

TENDER BY AUTHORITIES

Federal Road Agency Tenders|

Bangladesh Railway Tenders|

Area Metropolitana De Barcelona Tenders|

Jsc Russian Railways Tenders|

Kuwait Oil Company Tenders|

Civil Aviation Authority Tenders|

Food And Agriculture Org. Tenders|

Eskom Tenders|

Energy Regulation Commision Tenders|

Dept Of Defence Tenders

TENDER BY CATEGORIES

Agriculture Or Forestry Works Tenders|

Automobiles And Auto Parts Tenders|

Civil And Construction Tenders|

Consultancy Services Tenders|

Education And Training Services Tenders|

Electrical And Electronics Tenders|

Finance And Insurance Sectors Tenders|

Food Products Tenders|

Furnitures And Fixtures Tenders|

Healthcare And Medicine Tenders

TENDER BY PROCUREMENT

Goods Tenders|

Works Tenders|

Services Tenders

OFG MANUFACTURING BUSINESSES PRIVATE LIMITED

Head Office

Sales Office

COMPANY

About Us

Contact Us

Download Media Kit

POLICIES

Terms of Use

Privacy Policy

SUPPORT

Request Demo

MOBILE APPS