Andhra Pradesh Industrial Infrastructure Corporation Tender

Supply, fabrication, transportation and erection of single section hot dip galvanized continuously tapered 7.5 m long Octagonal Pole with 1.5 m long single arm bracket fabricated from MS galvanized pipe of 40 mm dia (NB) suitable to withstand wind speed of 180 kmph with BSEN-10025 grade S 355 JO steel plate for shaft (3 mm thick), bottom dia. of 130 mm A/F, top dia. 70 mm A/F, Steel plate conforming to IS 2062 for base plate of size 220 mm (L) x 220 mm (B) x 12 mm (T) welded to bottom of the pole with reinforced camouflaged junction box and weather proof door with opening arrangements incorporating 6A-10 kA-SP MCB, 63A-500 V-4 Way Bakelite power block connector etc., mounted on 3 mm thick Hylam/Bakelite Sheet, including excavation of pit in soil to a depth of 1.00 m for casting M 20 grade vibrated cement concrete pedestal of size 0.45 m (Length) x 0.45 m (Breadth) x 1.2 m (Height) with HYSD steel reinforcement of Fe 500 grade weighing around 10 kg bearing 8 nos. of 10 mm dia rods and 8 nos. of 8 mm dia stirrups duly embedded with 4 nos. of M 20 x 700 mm long 'J' type Anchor bolts (EN 8 grade), and suitable HDPE/PVC pipe for entry and exit of UG cable, curing for 7 days, and labour charges for erection of pole on pedestal with M 20 nuts and M 20 plane washers, providing coil earthing, maintaining pole number and circuit number on pole etc., as directed by field engineers during execution for finished item of work, including cost of all materials, conveyance to site, centering, hire, operational charges of all T&P, labour for fabrication and other operations etc., complete. [Octagonal pole makes: Bajaj/Valmont]

Supply, installation, testing and commissioning of 60 W rated power (max.) LED Street light luminaire with housing fabricated from Pressure die cast or extruded Aluminium with a grey paint/powder coating, an extra clear toughened glass/PC diffuser, impact resistance IK ≥ 07, conforming to IP 66, High power LEDs with Secondary optic lens achieving min. system efficacy 120 lm/W @ CCT 5700 K (ANSI), CRI (Ra) ≥ 70, Junction temp. 70 deg. C, lifetime residual flux of 70% (L70) @ 50,000 burning hours at Ta = 30 deg. C, powered by Potted (Constant Current) Driver having efficiency 90%, input voltage : 120 V-270 V AC, freq.: 50/60 Hz, P.F 0.9, T.H.D 10% at 110 V AC, built-in driver surge protection 4 kV (min.) and additional surge protection 10 kV with luminaire performance complying to IS 10322 (Part 5/Sec-3) etc., compatible for mounting on pole bracket along with run of PVC insulated 3 Core x 1.5 Sq.mm Sheathed flexible copper cable for extn. of supply with connections as required,with earth connection and not less than two years warranty including cost of all materials, conveyance, labour and incidental charges etc., complete. [a) LUMINAIRE MAKE : Wipro (DOT: LR08-781-XXX-57-SP)/Philips (Smart Bright-BRP062)/GE-Venture (Blue Hill-R1)/Crompton (Raptor Neo)/Havells (Endura Series)/Keslec (Hana) b) LED MAKE : PHILIPS LUMILEDS/CREE/NICHIA/OSRAM/SAMSUNG/LG; 3 Core x 1.5 Sq.mm Wire: Finolex/RR kabel/Polycab/Havells]

Supply, transportation and laying of double walled corrugated (DWC) 50 mm outer dia and inner dia 38 mm HDPE pipe having corrugation on the outer wall and plain surface inner wall conforming to BSEN-500 86/IS : 14930 Part - II along the cable trench dug out in soil for safeguarding UG cable, including cost, conveyance, and labour charges etc., complete but excluding charges for excavation of soil and back filling. [Makes : DURA LINE (Dura Guard)/Precision/CPE or equivalent make]