Andhra Pradesh Education And Welfare Infrastructure Development Corporation Tender

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Footings (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Pedastals (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Plinthbeam (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Columns (APSS No. 402 & 403)

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

FLY Brick Masonry with CM (1:6) prop: using fly ash bricks of size 290x225x140 from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, curing, etc., complete for finished item of work for basement. (APSS No. 501 & 504).

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Brick Masonry in superstructure with CM (1:8) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).

Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Lintels (APSS No. 402 & 403)

Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Sunshade 0.60mm wide (APSS No. 402 & 403)

Supply and fixing of RCC Precast Jollies 50mm thick including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of different diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126)

Painting to walls with two coats of Acrylic Emulsion paint Interior Grade of superior quality of approved brand and shade over base coat of cement primer making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912)

Painting to walls with two coats of Acrylic Emulsion paint Exterior Grade of superior quality of approved brand and shade over base coat of cement primer making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912)

Painting to Wood work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat primer with Luppam finishing after thouroughky brushing the surface to remove all reamains of loose powdered materials including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).

Supply and Fixing of Door with Double leaf shutter of Size 1.22x2.13 mtrs with Medium Teak wood Frame of sections size 75mmx100mm with double shutters of 35mm thick solid bond wood block board type with commercial ply on both faces including cost and conveyance of all materials and fixtures such as 6 Nos. of 300mm long MS Hold fasts, 6 Nos.of 125mm long MS butt hinges, 1 No.of 250mm long Aluminium tower bolt, 2 Nos.of 150mm long Aluminium handles & 2 Nos.of Aluminium Door Stoppers including all labour charges for wrought and put- up of Door frame anad shutter and fixing in position all labour charges etc.., complete for finished item of work

Flooring with Soluble Salt Porcelain Polished Vetrified Tile screen printed and polished of size 600x 600mm and thickness between 8 to 10mm thick 1st. quality of any shade as approved by Engineer -in- charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)

Providing skirting with Soluble salt porcelain Vitrified tiles screen printed and polished of size 600x600mm and thickness between 8 to 10mm 1st. quality of any shade as approved by Engineer -in- charge set over a base coat of CM (1:8), 12mm thick with cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement paste mixed with pigment of matching shade to full depth (joints of stone should be flushed), including cost and conveyance of all materials like cement, sand, water, flooring stones etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as dressing of flooring stones to the required sizes, mixing of cement mortar, laying, jointing, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)

Supply & fixing pre-painted galvalium trepizoidal profile roofing sheets with 0.50mm thickness, coating Alu-zinc coating AZ 150 GSM. Tensile strength 550 MPA, paint coating: Regulat modified polyster painting. THickness (top) 18-20 microns, (Bottom) 5-7 microns including C/C of all materials like sheets, J bolts, bitumen washers etc.., with or without ridge with sales & all other taxes & all labour charges etc.., complete for fixing sheets in position

supply and Fixing MS Purlins 50 mm dia mediam grade including Labour Charges for fixing complete including cost and conveyance of all materials to site, sales and other taxes all labour charges etc., complete for finished item of work

Providing and fixing Thermocole False Ceiling in true horizental level 600mm x 600mm using 19 mm thick Thermocole sheet anodised Aluminium Tee Sections of size 24.50mm x 24.00mm x 2.4mm in grid with cross tee of size 24x24.50mm at every 600 mm C/C and adnodised aluminium wall angle of size 24x24 mm fixed to periphery of the wall and the above gid is suspended at every 1200 mm c/c in both directions using 2.0mm thick GI wire for finished of size 600 x 600 mm including cost and conveyance of all materials and labour charges such as cutting. fixing of standing of frame work exposing roof making complete for finished item of work

Supply and fixing of 25mm dia using 1.80mm thick PVC pipe (ISI) Mark concealed in wall with all required accessories including masonary work for light fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete including cost and conveyance of all materials and all labour charges

Wiring with 2 runs of 22/0.3 mm (1.50sq.mm) fire Retardant (FR) PVC insulated fexible copper cable (ISI Make) and 1 run of 1.50sqmm of 22/0.3mm flexible copper cable for run of earth in existing pipe with 6 A one way one modular switch, modular ceiling rose, and 8 modular covering plate to switch control box including all labour charges etc., complete for modular light, bell, fan and exhaust fan points, in NON -Residential Building .

Supply and run of 2 of 2.5 sq.mm ( 36/0.30 ) PVC insulated flexible copper cable in existing PVC conduit pipe for circuits including labour charges (phase neutral) etc., complete as required for switch board circuit mains.

Supply of 1200 mm (48" ) sweep 230V AC 50Hz High Speed ceiling fan with thee blades and doub le ball bearing croption make with all standard accessories etc., including cost and conveyance of all materials andall lablur charges etc., complete

Supply of Electronic step type modular regulator for ceiling fans 1200mm sweep complete erected on existing board including and giving connections complete including all lablur charges etc., complete for finished item of work.

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc.., complete

Supply and fixing of 18/20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of =100 lumens/watt , PF0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty.

Supply of 600 mm (24") sweep 230V AC 50Hz High Speed tropedo Wall Mounted Fan with three blades with fiber body of croption make all standard accessories etc., including cost and conveyance of all materials andall lablur charges etc., complete

Labour charges for fixing of Wall mounted Air Circulated Fan including transportation and giving connections with twin core wire etc.., complete

Dismantaling and clearing way, carfully stracking materials useful for reuse of Old Cement Motor Plastering including all labour charges for all oprations etc., complete for finished item of work

Dismantaling and clearing way, carfully stracking materials useful for reuse of Brick Masonry in Cement Motor including all labour charges for all oprations etc., complete for finished item of work

Providing supply and application of chemical treatment flexible acrylic polymer cementicias water proofing sealant treatment to Roof Slab, after thoroughly scraping and brushing the surface to remove all loose powdered materials of the Roof Slab, before primary coat you have applied filling cracks with required chemicals as directed by the Department, after that applied primary coat of brush bond acrylic latex water proofing adhesive cum bonding agent of hydroment 476 create HS / Bosco create chemical or equivalent with 1:4 ratio i.e.., 1 lit. Hydroment 476 create HS / Bosco create chemical and 4 Lt. Water in pigment to apply brush bond to Roof Slab after completion of the primary coat and dry the surface to apply the second coat of brush bond of flexible acrylic polymer cementicias (Bostik or other equivalent) of two components i.e.., powder and chemical liquid in pigment to apply the surface of the roof slab. After two hours later to apply the brush bond of acrylic latex chemical with cement in ratio 1:2 i.e.., 1 lit. acrylic latex in 2 Kgs of cement with pigment to apply the brush bond to roof slab including cost and conveyance of all materials and hire charges of scraping, brushing, cutting, browing machine and all labour charges for scraping, brushing, browing, applying charges etc.., complete as directed by the Department for finished item of work.

Providing Wearing Coat with CC M20 grade of (1:1.5:3) using 6 to 12 mm HBG metal 40 mm thick top finished with CM (1:3) 4mm thick with floating coat of neat cement and threaded lineing at intervals of 45 x 45 cm including cost and conveyance of all materials and all labour charges for all operations, incidental charges such as mixing motor/concrete, laying, rounding off at junctions of wall slab, rounding smooth threading curing, lift charges etc., complete for finished item of work.

Whiting to walls and ceiling in single coat with Surya cem or equavalent quality to give an even shade after thoroughly brushing the surface to remove all loose powdered materials including cost and conveyance of all materials and water to site, sales & other taxes, all operational, incidental and labour charges such as cleaning the surface, painting, curing etc., complete for finished item of work for internal walls. (APSS No.901 & 908)

Painting to walls with two coats of Acrylic Emulsion paint Exterior Grade of superior quality of approved brand and shade over base coat of cement primer making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912)

Painting to walls with Single coat of Acrylic Emulsion paint Interior Grade of superior quality of approved brand and shade to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912)

Colored Flooring of Red oxide colour compound with CC (1:5:10) using 40mm HBG metal 100mm thick and base coat of CM (1:5) 20mm thick with requiredb cement slurry and top finished with colour compound of Redoxide with required white cement pigement (1:2) ratio over the surface of flooring bed when it is green finished smooth with floating coat and treed lining at regular intervals including cost & conveyance of all material & all labour charges etc., complete for finished item of work

Providing Specialised Polysulphide Sealant Treatment To The Expansion Joints On Terrace : (Size : 25mm x 12mm) Application of one coat of-High performance specially designed SBR latex polymer based bonding agent– or equivalent mixing with cement as per manufacturers c]. Providing and application of Acrylic Polymer modified reinstatement concrete/mortar admixture with - to finish the damaged edges of joint and making the groove. d]. Providing and fixing of masking tape on top of the joint both sides. e]. Providing and fixing of Back up support material of Polyethelene foam to leave the depth of 12mm on the joint. f]. Providing and application of one coat of polysulphide primer with – Polysulphide primer on inner edge on joints. g]. Providing and application of Two part Polysulphide sealant to a width of 25mm and 12mm depth with - BS 4254 - 83 or equavalent with putty knife and neat finish. h]. Removing of masking tape and providing and application of two coats of Acrylic elastomeric cementitious coating including cost and conveyance of all materials and all labour charges etc.., complete for finished item of work

Supply ad fixing of 24 guage alluminium sheet over expansion joint groove of width 15 cm fixed to walls / columns at one edge and resting over the other block walls / columns concealing expansion joint with slotted holes for free edge of aluminium sheet to faciliate free movement of aluminium sheet over the finished surface of expansion joint and wall face using sheet metal screws with nylon reciver complete including cost and conveyance of all materials to site, all incidental, operational labour charges etc.., complete for finished item of work as per approved drawing (for all floors for vartical joints and bottom of slab)

Providing and fixing of Expansion joint filler board for buildings, columns, beeams and slabs Armour Board sillfill including cost and conveyance of all materials to site, all incidental, operational, labour charges etc.., complete for finished item of work as per approved drawing for all floors.