Andhra Pradesh Education And Welfare Infrastructure Development Corporation Tender

Brick Masonry with CM (1:6) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, curing, etc., complete for finished item of work for basement. (APSS No. 501 & 504).

Flooring with Non Skid Full body Ceramic Floor Tiles of 300x300mmand 7 to 8 mm thick 1st. quality of any shade as approved by Engineer -in- charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707) inculding CC Bed

Supply and Fixing of Door with Double leaf shutter of Size 1.22x2.13 mtrs with Medium Teak wood Frame of sections size 75mmx100mm with double shutters of 35mm thick solid bond wood block board type with commercial ply on both faces including cost and conveyance of all materials and fixtures such as 6 Nos. of 300mm long MS Hold fasts, 6 Nos.of 125mm long MS butt hinges, 1 No.of 250mm long Aluminium tower bolt, 2 Nos.of 150mm long Aluminium handles & 2 Nos.of Aluminium Door Stoppers including all labour charges for wrought and put- up of Door frame anad shutter and fixing in position all labour charges etc.., complete for finished item of work

Providing and fixing of Openable Windows with Fly-mesh made of pre-painted steel (Base steel as per IS 513 of 0.60mm thick galvanized as per IS 277 with Zinc if 150 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 72x55 mm, centre mullion of 72x50mm, section for fixed glass beading section should be 12x12mm and section for shutters of 47x20mm and outer frame and mullions sections with rebate for glazed shutters, fly mesh and a 20mm provision for guard bars / grills and fly mesh shutter sections of 20x40mm and the sections cut to length meter jointed with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos, of stainless steel heavy duty pivot hinges provided per shutter and panelled with 4mm thick plain headed glass and S.S.Mesh for fly mesh shutter (304 grade), fitted using rubber gadkets centre fixed both side openable shutter window 5'0"x4'0" (1524mm x 1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 47x20mm. Mullion section size of 72x50mm. Fixed beading section size of 12x12mm including cost and conveyance of all materials and ll labour charges etc., complete for finished item of works

Supply, Manufacturing and Fixing of Aluminium anodized fly proof mesh door single shutter to existing door frame using alround and middle horizontal sectin frame of size 44.70x18.50 x1.20mm thick and fixed to frame with required 0.20mm thick (304 guage) SS PC black mesh and binding with required EPDM mesh Gasket (beading) including cost and conveyance of all materials and fixtures such as 4Nos., of special grade PC hinges, 2Nos., of 150mm long aluminium tower bolts, 2Nos., of 100mm long aluminium handles and 2Nos., of Magnetic catches with required screws and specials like joint clips including cost and conveyance of all materials and all labour charges for fixing in position as directed by the departmental officers etc., complete for finished item of work.

Supply, Manufacturing and Fixing of Aluminium anodized fly proof mesh window shutter to existing window frame using alround and middle horizontal section frame of size 20.90x9.45 x0.86mm thick and fixed to frame with required 0.20mm thick (304 guage) SS PC black mesh and binding with required EPDM mesh Gasket (beading) including cost and conveyance of all materials and fixtures such as 2Nos., of special grade PC hinges, 1No. of 75mm long aluminium tower bolt, 1No., of 100mm long aluminium handle and 1No., of Magnetic catche with required screws and specials like joint clips including cost and conveyance of all materials and all labour charges for fixing in position as directed by the departmental officers etc., complete for finished item of work.

Providing supply and application of chemical treatment flexible acrylic polymer cementicias water proofing sealant treatment to Roof Slab, after thoroughly scraping and brushing the surface to remove all loose powdered materials of the Roof Slab, before primary coat you have applied filling cracks with required chemicals as directed by the Department, after that applied primary coat of brush bond acrylic latex water proofing adhesive cum bonding agent of hydroment 476 create HS / Bosco create chemical or equivalent with 1:4 ratio i.e.., 1 lit. Hydroment 476 create HS / Bosco create chemical and 4 Lt. Water in pigment to apply brush bond to Roof Slab after completion of the primary coat and dry the surface to apply the second coat of brush bond of flexible acrylic polymer cementicias (Bostik or other equivalent) of two components i.e.., powder and chemical liquid in pigment to apply the surface of the roof slab. After two hours later to apply the brush bond of acrylic latex chemical with cement in ratio 1:2 i.e.., 1 lit. acrylic latex in 2 Kgs of cement with pigment to apply the brush bond to roof slab including cost and conveyance of all materials and hire charges of scraping, brushing, cutting, browing machine and all labour charges for scraping, brushing, browing, applying charges etc.., complete as directed by the Department for finished item of work.

Wiring with 2 runs of 22/0.3 mm (1.50sq.mm) fire Retardant (FR) PVC insulated fexible copper cable (ISI Make) and 1 run of 1.50sqmm of 22/0.3mm flexible copper cable for run of earth in existing pipe with 6 A one way one modular switch, modular ceiling rose, and 8 modular covering plate to switch control box including all labour charges etc., complete for modular light, bell, fan and exhaust fan points, in NON -Residential Building .

Supply and run of 2 of 2.5 sq.mm ( 36/0.30 ) PVC insulated flexible copper cable in existing PVC conduit pipe for circuits including labour charges (phase neutral) etc., complete as required for switch board circuit mains.

Supply and fixing of 6A / 10A 3/2 pin 2 modular socket with shutter-2 Nos and 6A / 10A 1 Way 1 Modular switch controls-2 Nos duly recessed in wall with 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete for finished item of work.

Supply and fixing of 16A / 6A Modular type power outlet 6 Nos with front cover plates including 16A socke 1 No., 16A switch 1No., 6A sockets 2Nos., 6A switches 2 Nos and 6 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete for finished item of work.

Supply and fixing of 18/20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of =100 lumens/watt , PF0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty.

Supply of 1200 mm (48" ) sweep 230V AC 50Hz High Speed ceiling fan with thee blades and doub le ball bearing croption make with all standard accessories etc., including cost and conveyance of all materials andall lablur charges etc., complete

Supply of Electronic step type modular regulator for ceiling fans 1200mm sweep complete erected on existing board including and giving connections complete including all lablur charges etc., complete for finished item of work.

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc.., complete

Supply and fixing of Batten holder/slenting holder in lieu of ceiling rose of light point and fixing of 0.50 W LED Lamp complete with all connection and labour charges etc., complete .for finished item of work

Supply, transportation and fixing of 60W LED Street Light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, supply input voltage 120-270V AC, P.F 0.90, high power LED's having system efficacy110 IM/W and junction temprature70 C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge Protection 4KV, external Surge protection 10KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, w, CCT:3000K - 5700K, minimum CRI70, etc.., including cosst and coneveyance of all materials and all labour charges etc.., complete for finished item of work.

Supply and fixing NP Bib Taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyacne of all materials and all labour charges etc., complete for finished item of work.for 300 grams

Supply and fixing of 110mm PVC / SWR pipe 4kgs/cm2 including cost and conveyance of all materials and all labour charges etc., complete work for finished item of wrok

Supply and fixing of 90mm PVC / SWR pipe 4kgs/cm2 including cost and conveyance of all materials and all labour charges etc., complete work for finished item of wrok

Supply and fixing of 28.60mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Supply and fixing of 41.30 mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Providing & placing of terrance (at all floor) polytech water storate tank with double layer approved brand & manufacture with cover and suitable locking arrangements and making necessary holes for inlet andoutlet and over flow pipe wigth out fittings and base supports for tank including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work

Supplying and erecting apporved make Texmo MONO Block 1.00 HP centrifugal water pump with impeller, priming funnel cork, companion materlick flanzes, with bolts and nuts and mounted n a common shaft of high efficeient squireel cage induction motor totally enclosed and fan colled type suitable to aperate on 230V, single phase, 50HZ 1420RPM A.C Supply of 1.00HP with minimum/Maximum discahrges/Liters per second for minimum/ Maximum head/ Mts. and suction/ delivery pipe of sizes/ MM with nuts duly grouted in existing C.C foundation and bolts, spring washers of requisite size mono block and pump (IS-9079)" including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work