Andhra Pradesh Education And Welfare Infrastructure Development Corporation Tender
... More
To know what Andhra Pradesh government has posted about any AP etender, Bidassist helps us to get a one-stop platform where a registered bidder can have access to the details on each and every eprocurement tender. There is no need to provide the details on the AP E-procurement website i.e. https://www.apeprocurement.gov.in as BidAssist helps us find the specific etender we're looking for. BidAassist has collated each and every Eproc Andhra Pradesh Tender on its website.
Andhra Pradesh Education And Welfare Infrastructure Development Corporation - APEWIDC Tender
Civil And Construction
Building Construction
Construction Material
Opening Date6 May 2020
Closing Date26 May 2020
Tender Amount₹ 92,10,124
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 35,400
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
329533Bid Award Id
ViewTender No
NIT No. 32/EE/APEWIDC/KDP/AEE/2020-21, Dt. 24.04.2020Tender Authority
Andhra Pradesh Education And Welfare Infrastructure Development Corporation ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Hard blasted Granite stones from approved quarry including c/c like Granite stones, cement, sand, water, etc., to site including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement (APSS No. 601 & 615)
58
-
3477.2
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Footings
42
-
8556.95
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Pedestals
4.5
-
9026.2
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Columns
20
-
10223.7
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Plinth Beams
18.5
-
10820.2
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Roof Beams
23.5
-
9008.65
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) 175mm Thick Waist Slab
17.5
-
1397.15
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) 125mm Thick Roof Slab
352
-
1295.95
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) 150mm Thick Roof Slab
56
-
1501.25
... More
Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Sunshades
14.5
-
750.35
... More
Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Lintels
3
-
9967.45
... More
Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
245.5
-
377.35
... More
Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
122
-
157.05
... More
Brick Masonry in superstructure with CM (1:8) prop: using fly ash bricks of size 225xx100x60mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).
71.5
-
5930.15
... More
Supply and Fixing of 18guage MS Plain sheet Door of size 1.22 x 2.13 mts with outer angular frame of rolled steel equal angle 40 x 40 x 6m and inner shutter angular frame rolled steel equal angle 35 x 35 x 5 mm with Double leaf shutter,MS Flats 25x4mm-3Nos for Horizontal to the Dor MS aldrop 300mm long-1No MS Tower bolt 300mm long-2Nos,MS Hinges 150mm long-4Nos with primary coat of Red oxide paint including cost,conveyance of all materials to site ,sales and other taxes on all materials and labour charges etc complete
5
-
6494
... More
Supply and Fixing of 18guage MS Plain sheet Door of size 0.90 x 2.13 mts with outer angular frame of rolled steel equal angle 40 x 40 x 6m and inner shutter angular frame rolled steel equal angle 35 x 35 x 5 mm with Double leaf shutter,MS Flats 25x4mm-3Nos for Horizontal to the Dor MS aldrop 300mm long-1No MS Tower bolt 300mm long-2Nos,MS Hinges 150mm long-4Nos with primary coat of Red oxide paint including cost,conveyance of all materials to site ,sales and other taxes on all materials and labour charges etc complete
1
-
6174
... More
Supply and fixing of 18 guage M.S. Plain Sheet WINDOW of size 1.52 M x 1.22 M (Six Leafs shutters with outer angular frame of rolled steel equal angle ISA 4040 of Size 40mm x 40mm x 6mm and inner shutter angular frame of rolled steel equal angle ISA 2525 of size 25mm x 25mm x 4mm and rolled steel Tee Bars 40mm x 40mm x 6mm one number horizontally in centre of the window and 2 Nos. verticles also bended with fixtures such as M.S. Powder coated tower bolts 100mm long 6 Nos., M.S. Powder coated butt Hinges 12 Nos., M.S. Powder coated handles 125mm long 6 Nos., M.S. Powder coated wind appliance 6 Nos., and safety rods 10mm square roads at 100mm centre to centre welded horizontally to full width of window including redoxide primer grade I quality coating including cost and conveynace of all materials, labour charges etc., complete for finished item of work.
13
-
7361
... More
Supply and Fixing of Ventilator of size 1.52 x 0.3 with 25mm x 25mm x 3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work
4
-
727.75
... More
Supply and Fixing of Ventilator of size 1.22 x 0.3 with 25mm x 25mm x 3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work
5
-
599.3
... More
Supply and Fixing of Ventilator of size 0.90 x 0.3 with 25mm x 25mm x 3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work
1
-
445.9
... More
Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) proportion nominal mix (C:FA:CA) using 20mm size HBG (IS383, 1970) Machine Crushed graded metal from from approved quarry including c/c like cement, sand, coarse aggregate, water etc. to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Bed Blocks and Hold Fasts (APSS No. 402)
1
-
5130.7
... More
Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) proportion nominal mix (C:FA:CA) using 20mm size HBG (IS383, 1970) Machine Crushed graded metal from from approved quarry including c/c like cement, sand, coarse aggregate, water etc. to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work for Bed Blocks and Hold Fasts (APSS No. 402)
0.75
-
5130.7
... More
Ornamental Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904)
316.5
-
368.51
... More
Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904
669
-
352.85
... More
Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete for Uneven Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904)
50
-
372.25
... More
Making Green Chalk Board of size 3.00Mx1.20Mts including border with plastering in CM (1:2) 12mm thick as base coat and 3mm thick top coat with cement green oxide powder in (1:1) prop. and making border of 50x20mm thick alround the chalk board over existing plastered surface and painting the chalk board surface with chalk board paint as per direction of Engineer-in-Charge including cost and conveyance of all materials, sales and other taxes on cost of materials and all operational, incidental and labour charges etc., complete for finished item of work (APSS No.1603)
25.07
-
621.9
... More
Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over an existing steel primer including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors at Agali
104
-
93
... More
Whiting to new walls and ceiling in two coats with Birla White or equavalent quality to give an even shade after thoroughly brushing the surface to remove all loose powdered materials including c/c and water to site, sales & other taxes, all operational, incidental and labour charges such as cleaning the surface, painting, curing etc., complete for finished item of work for internal walls. (APSS No.901 & 908) in All Floors
316.5
-
33.6
... More
Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912) for External walls
278.98
-
209.95
... More
Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912) for Internal walls
439.69
-
140.85
... More
Flooring with Polished Kadapa Slabas 15mm thick (0.457 M x 0.457 M) set over a base coat of CM (1:8), 12mm thick (joints of stone must be flushed) over C.C. bed already laid or R.C.C. roof slab only after it is properly cured, cleaned, moistered and where necessary treated with neat grey cement slurry of honey like consistency spred at3.3 kgs of cement for 1 sqm. and jointed with neat cement paste to full depth, including cost and conveyance of all materials like cement, sand, water, flooring stones etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as dressing of flooring stones to the required sizes, mixing of cement mortar, laying, jointing, curing, lift charges etc., complete for finished item of work.(APSS No.703 & 701)
292.5
-
524.85
... More
Providing skirting to internal walls 12.5 Cm high with Vitrified tiles pure white stone minimum of 25 mm thick with length equal to flooring stones set over a base coat of CM (1:3), 12mm thick with cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement paste mixed with pigment of matching shade to full depth (joints of stone should be flushed), including cost and conveyance of all materials like cement, sand, water, flooring stones etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as dressing of flooring stones to the required sizes, mixing of cement mortar, laying, jointing, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)
18
-
569.55
... More
Reinforced cement mortar Facia 5 cm thick in CM (1:3) for drop walls, Fins & staircase railing with rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with dubara spong finishing including cost & conveyence of all materials to site, including seigniorage charges, sales and other taxes on all materials and all operational, incidental charges such as labour charges, like mixing cement mortar, scaffolding charges, lift charges, curing, for making 50 mm thick RCM Paradah walls (RCM Drop walls) including tying Rabbit (chicken) wire mesh to the existing mild steel / HYSD Steel reinforcement applying mortar lumps, finishing, plastering to both faces, sponge finishing etc complete for finished item of work but excluding cost of steel and its fabrication charges in All Floors
29
-
1284.25
... More
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.
14.74
-
57833.2
... More
FIRST FLOOR
-
-
-
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Columns
13.8
-
10708.75
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Roof Beams
23.2
-
9333.6
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) 175mm Thick Waist Slab
17.5
-
1445.3
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) 125mm Thick Roof Slab
370
-
1353.5
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) 150mm Thick Roof Slab
56
-
1501.2
... More
Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Sunshades
14.5
-
782
... More
Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Lintels
3
-
10395.05
... More
Brick Masonry in superstructure with CM (1:8) prop: using fly ash bricks of size 225x100x60mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).
83.5
-
6236.5
... More
Supply and Fixing of 18guage MS Plain sheet Door of size 1.22 x 2.13 mts with outer angular frame of rolled steel equal angle 40 x 40 x 6m and inner shutter angular frame rolled steel equal angle 35 x 35 x 5 mm with Double leaf shutter,MS Flats 25x4mm-3Nos for Horizontal to the Dor MS aldrop 300mm long-1No MS Tower bolt 300mm long-2Nos,MS Hinges 150mm long-4Nos with primary coat of Red oxide paint including cost,conveyance of all materials to site ,sales and other taxes on all materials and labour charges etc complete
5
-
6494
... More
Supply and Fixing of 18guage MS Plain sheet Door of size 0.90 x 2.13 mts with outer angular frame of rolled steel equal angle 40 x 40 x 6m and inner shutter angular frame rolled steel equal angle 35 x 35 x 5 mm with Double leaf shutter,MS Flats 25x4mm-3Nos for Horizontal to the Dor MS aldrop 300mm long-1No MS Tower bolt 300mm long-2Nos,MS Hinges 150mm long-4Nos with primary coat of Red oxide paint including cost,conveyance of all materials to site ,sales and other taxes on all materials and labour charges etc complete
1
-
6174
... More
Supply and fixing of 18 guage M.S. Plain Sheet WINDOW of size 1.52 M x 1.22 M (Six Leafs shutters with outer angular frame of rolled steel equal angle ISA 4040 of Size 40mm x 40mm x 6mm and inner shutter angular frame of rolled steel equal angle ISA 2525 of size 25mm x 25mm x 4mm and rolled steel Tee Bars 40mm x 40mm x 6mm one number horizontally in centre of the window and 2 Nos. verticles also bended with fixtures such as M.S. Powder coated tower bolts 100mm long 6 Nos., M.S. Powder coated butt Hinges 12 Nos., M.S. Powder coated handles 125mm long 6 Nos., M.S. Powder coated wind appliance 6 Nos., and safety rods 10mm square roads at 100mm centre to centre welded horizontally to full width of window including redoxide primer grade I quality coating including cost and conveynace of all materials, labour charges etc., complete for finished item of work.
13
-
7361
... More
Supply and Fixing of Ventilator of size 1.52 x 0.3 with 25mm x 25mm x 3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work
4
-
727.75
... More
Supply and Fixing of Ventilator of size 1.22 x 0.3 with 25mm x 25mm x 3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work
5
-
599.3
... More
Supply and Fixing of Ventilator of size 0.90 x 0.3 with 25mm x 25mm x 3mm thick equal L angles and 10mm square rods @ 150mm c/c fixing in position ,complete for finsihed item of work
1
-
445.9
... More
Ornamental Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904)
370
-
405.95
... More
Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904
1056
-
386.65
... More
Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades over an existing steel primer including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors at Agali
103.5
-
93
... More
Whiting to new walls and ceiling in two coats with Birla White or equavalent quality to give an even shade after thoroughly brushing the surface to remove all loose powdered materials including c/c and water to site, sales & other taxes, all operational, incidental and labour charges such as cleaning the surface, painting, curing etc., complete for finished item of work for internal walls. (APSS No.901 & 908) in All Floors
1426
-
33.6
... More
Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912) for External walls
206.25
-
209.95
... More
Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912) for Internal walls
849.31
-
140.85
... More
Flooring with Polished Kadapa Slabas 15mm thick (0.457 M x 0.457 M) set over a base coat of CM (1:8), 12mm thick (joints of stone must be flushed) over C.C. bed already laid or R.C.C. roof slab only after it is properly cured, cleaned, moistered and where necessary treated with neat grey cement slurry of honey like consistency spred at3.3 kgs of cement for 1 sqm. and jointed with neat cement paste to full depth, including cost and conveyance of all materials like cement, sand, water, flooring stones etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as dressing of flooring stones to the required sizes, mixing of cement mortar, laying, jointing, curing, lift charges etc., complete for finished item of work.(APSS No.703 & 701)
280
-
552.8
... More
Providing skirting to internal walls 12.5 Cm high with Vitrified tiles pure white stone minimum of 25 mm thick with length equal to flooring stones set over a base coat of CM (1:3), 12mm thick with cement slurry of honey like consistency spread @ 3.3 Kgs per sqm and jointed with neat cement paste mixed with pigment of matching shade to full depth (joints of stone should be flushed), including cost and conveyance of all materials like cement, sand, water, flooring stones etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as dressing of flooring stones to the required sizes, mixing of cement mortar, laying, jointing, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)
16
-
602.05
... More
Reinforced cement mortar Facia 5 cm thick in CM (1:3) for drop walls, Fins & staircase railing with rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with dubara spong finishing including cost & conveyence of all materials to site, including seigniorage charges, sales and other taxes on all materials and all operational, incidental charges such as labour charges, like mixing cement mortar, scaffolding charges, lift charges, curing, for making 50 mm thick RCM Paradah walls (RCM Drop walls) including tying Rabbit (chicken) wire mesh to the existing mild steel / HYSD Steel reinforcement applying mortar lumps, finishing, plastering to both faces, sponge finishing etc complete for finished item of work but excluding cost of steel and its fabrication charges in All Floors
29
-
1383.1
... More
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.
10.17
-
58917.1
... More
Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work (APSS No. 901 & 903).
402.5
-
437.6
... More
Making Green Chalk Board of size 3.00Mx1.20Mts including border with plastering in CM (1:2) 12mm thick as base coat and 3mm thick top coat with cement green oxide powder in (1:1) prop. and making border of 50x20mm thick alround the chalk board over existing plastered surface and painting the chalk board surface with chalk board paint as per direction of Engineer-in-Charge including cost and conveyance of all materials, sales and other taxes on cost of materials and all operational, incidental and labour charges etc., complete for finished item of work (APSS No.1603)
25.07
-
621.9
... More
Reinforced cement concrete with M 20 grade Design mix ( by weigh batching ) using 20mm size (SS 5) machine crushed hard blasted granite graded metal (coarse aggregate) from approved quarry using a minimum quantity of 350 Kg of cement per 1 Cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) ,coarse aggregate, water etc. to site and cost of seigniorage charges on all materials including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc.,, shuttering, machine mixing, laying concrete, 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including labour charges for mixing, laying, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402 & 403)
6.5
-
624.8
... More
Supply and fixing of 110mm dia ISI mark PVC rain water spouts of 2.5 Kg/cm2 pressure including Cost of necessary pvc bends, shoes and M.S.clamps and all other accessories and fixing in position including cost and conveyance of all materials to site , seigniorage charges sales and other taxes on all materials, all operational, incidental and labour cahrges such as fixing in alignment etc., complete for finished item of work.(APSS NO1328) in All Floors
100
-
596.9
... More
Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.Copper wire make: Gloster/ Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab /Fortune Art / Kundan cab/Sudhakar/Orbit/Standard/Tamra/Anchor. Modular Switch, Socket, Metal box & Cover frame Make:Legrand Arteor / Schneider Zen celo/ Crabtree Murano / GM-Zenova/Goldmedal (i-Push).Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom
70
-
533.06
... More
Supply and Fixing of 16A 3pin and 6A 3pin plug socket with and 16A switch control duly recessed in wall with MS switch deep box of 6" x8" x2 1/2" size covered with hylam sheet including earth connections and all labour charges etc., complete.
Makes : G
6
-
567.23
... More
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
6
-
423.95
... More
Supply and run of 2 of 2.5 sq.mm PVC insulated flexible copper cable and one run of 1.0 sq.mm flexible copper wire for earthing in existing MS conduit pipe for circuits including labour charges (phase neutral and earth) etc., complete as required for swi
100
-
67.19
... More
Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessories with 36/40W tube. Makes : Wipro / G.E. / Phillips / Crompton / Bajaj/Havells/HPL/Halonix
6
-
863.74
... More
Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories.
Makes: Crompton Aura / Bajaj R Gold / Havells Festiva / Usha Premium.
9
-
2295.73
... More
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
9
-
165.64
... More
Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete. Makes : Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T-englaze/ GM-Zenova/Goldmedal(i- Push)
9
-
409.14
... More
Supply and fixing of concealed box PVC/MS with hook for fan
9
-
39.78
... More
Supply and Fixing of 7/20 Service Wire including all materials and labour charges etc. complete.
50
-
63.5
... More
Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes
1
-
3526.7
... More
Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 12 Nos S.P.out goings and for 1 No 4 pole Incommer including internal connection and labour charges for flush mounting etc., complete. Incommer: 40A FP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 12 Nos DB Makes :ABB/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer, Make: Milltec / Sputnik / Benlo / Vimal/Polycab/ Precision/Amron.,.MCB Make:Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU
1
-
7149.72
... More
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Anchor/ Polyline/ Polycab/ Orbit/AKG
140
-
76.35
... More
Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work including seignerage charges excluding dewatering charges etc., complete for Foundation of Building.(APSS No. 308)
73
-
173.7
... More
Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (C:FA:CA) using 40mm size HBG (IS383, 1970) metal from approved quarry including c/c like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations (APSS No. 402)
2
-
4028.55
... More
Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (C:FA:CA) using 40mm size HBG (IS383, 1970) metal from approved quarry including c/c like cement, sand, coarse aggregate, water etc. to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)
4
-
3867.85
... More
Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Hard blasted Granite stones from approved quarry including c/c like Granite stones, cement, sand, water, etc., to site including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement (APSS No. 601 & 615)
22
-
3477.2
... More
Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
30
-
157.05
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc.,, shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, plinth , pedastals(below plinth)(APSS No. 402 & 403) FOOTINGS
2.52
-
8556.95
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc.,, shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, plinth , pedastals(below plinth)(APSS No. 402 & 403) . Pedastals
0.73
-
9026.2
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc.,, shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, plinth , pedastals(below plinth)(APSS No. 402 & 403) columns
1.49
-
10223.7
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc.,, shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, plinth , pedastals(below plinth)(APSS No. 402 & 403) Plinth beam
1.79
-
10820.2
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc.,, shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, plinth , pedastals(below plinth)(APSS No. 402 & 403) .Roof beam
1.34
-
9008.65
... More
Vibrated Reinforced Cement Concrete M 20 Design Mix ( by weigh batching ) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concreteincluding cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc.,, shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for foundation, plinth , pedastals(below plinth)(APSS No. 402 & 403) Roof slab 125mm thick
4.5
-
1295.95
... More
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors.
1110
-
57.83
... More
Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyence of water to the work site and all operational, incidental, labour charges, seignorage charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
3.08
-
764.9
... More
Brick Masonry in superstructure with CM (1:8) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504).
12.22
-
5930.15
... More
Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work (APSS No. 901 & 903).
35.32
-
408.15
... More
Supply and Fixing MS GILLS including Labour Charges for fixing complete including cost and conveyance of all materials to site, sales and other taxes, all labour charges etc., complete for finished item of work
45
-
80.19
... More
Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904
132.83
-
352.85
... More
Ornamental Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904)
17.27
-
368.51
... More
Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete for Uneven Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904)
73.08
-
372.25
... More
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1to15) of any colour and finish in all shades and designs set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707) in All Floors
16.45
-
825.95
... More
Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707) in All Floors
31.59
-
523.35
... More
Painting to New walls with two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/liter of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors INTERNAL
150.1
-
140.85
... More
Painting to New walls with two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/liter of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors External `
73.08
-
209.95
... More
Painting to New Iron work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ liter over an existing steel primer including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors
3.2
-
93
... More
Supply and Fixing of 25mm dia 2.20mm thick PVC pipe (ISI MARK) concealed in Roof alabs with all required accessories including masonry work and labour charges etc. complete make: Sudhakar/Maco plast/modi .
50
-
76.35
... More
Supply and Fixing of 25mm dia 1.80mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonry work for light, fan and separate plug point with well seasoned TW box including all labour charges etc. complete make: Sudhakar/Maco plast/modi .
50
-
86.12
... More
Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) fire Retardant Low Smoke (FRLS)P.V.C insulate flexible copper cable (ISI MARK) in existing pipe with 6A switch, celling rose and 3mm thick hylam sheet coverting to switch control box including all labour charges etc., complet for light, bell, fan and exhaust fan points in Residential Buildings Makes of wires: Polycab/Havells / Suncab / Fortune Art / paragon / HPL / L&T / power flex /RPG /Anchor /Bonton makes of switches : Anchor penta cherry / Gold madel Olive / million Zoom .
30
-
533.06
... More
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
10
-
423.95
... More
Supply and runs of 1 of 14/0.3mm (1.0 Sq.mm) FRLS P.V.C insulate flexible copper cable (ISI MARK) in existing pipe for earth continuity including all labour charges etc., complete Makes of wires: Polycab/Havells / Suncab / Fortune Art / paragon / HPL / L&T / power flex /RPG /Anchor /Bonton .
60
-
19.85
... More
Supply and runs of 2 of 2.5 Sq.mm FRLS P.V.C insulate flexible copper cable (ISI MARK) and one run of 1.0 sq.mm flexble copper wire for earthing in existing PVC/MS conduit pipe for cucuit mains including all labour charges(phase neutral and earth) etc., complete as required for switch board circuit mains.
Makes of wires: Polycab/Havells / Suncab / Fortune Art / paragon / HPL / L&T / power flex /RPG /Anchor /Bonton .
45
-
67.19
... More
Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 12 Nos S.P.out goings and for 1 No 4 pole Incommer including internal connection and labour charges for flush mounting etc., complete. Incommer: 40A FP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 12 Nos DB Makes :ABB/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer, Make: Milltec / Sputnik / Benlo / Vimal/Polycab/ Precision/Amron.,.MCB Make:Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/
1
-
7149.72
... More
Providing indepenent eatthing by excavating a trench to a depth od 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including fillng with equal proportion of salt and Charcoal in layers and all labour charges etc, complete for small quarters.
1
-
3526.7
... More
Supply and Run of No. 8 SWG G.I wire including cost of all accessories and labour charges etc. complete .
25
-
17.55
... More
Supply & Transproration and fixing of 46W/20W, 1600 W / 2000W 1200mm length LED, light voltage AC 220-260 Makes:Philips,GE,Crompton/wipro/Bajaj/havells/VIN/renesola b)LED make :Philips lumileds/cree/nichia/osram/samsung
10
-
863.47
... More
Supply and fixing of batten holder / slanting holder in lieu of celling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation)
Makes: Gold medal olive / Million Zoom / Anchor Penta Cherry .
20
-
164.22
... More
Supply and transportation of 45 W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F 0.90, high power LED's having efficacy 120 lumines/watt, System efficacy 95lm/W and junction temprature 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, external Surge protection ≥ 5KV with optics distribution , THD10% at 110 Volts AC, driver efficiency 90%, CCT: 3000K - 5700K, minimum CRI70, etc., complete . a) Luminaire Make : PHILIPS (ROAD STAR) / OSRAM / SCHREDER (VOLTANA / TECEO) / GE / VIN (MATRIX) / CROMPTON (OLYMPUS+) / BAJAJ (EDGE+) / HALONIX (MODULAR / LUMOS-SUPER) / HAVELLS (ENDURA CITYLINER STYLO+) b) LED MAKE :PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
1
-
5341.55
... More
Fixing of 40W street light luminaire to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti titting MS flat etc. including giving connections and labour charges etc complete. .
1
-
539.41
... More
Supply of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark.Makes: Crompton / Almounard / Havells Turbo Force.
4
-
1664.4
... More
Labour charges for fixing of exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete.
4
-
490.89
... More
Supply and Run of 2 of 10sqmm Alumium service wire
50.01
-
209.15
... More
Constructing 457.2mm x 457.2mm (1'-6" x 1'-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm (1'-6" x 1"-6") frame and cover of 20kg., including cost and convenyance of all materials to site, all labour charges, sales and otehr taxes on all materials etc., complete for finished item of work.
15
-
3678.85
... More
Supplying and fixing 58402mm long Orissa pan white glazed Water Closet 1st quality ISI Marked confirming to IS:2556-part-3-1981 with "P" or "S" trap Hindware / parryware / Neycer with brick masonry seat, CC squatting plate and 10 liters capacity single flush PVC low level cistern parryware or equivalent with internal components and short bend and fixed on teak wood blocks of size 75mm×100mm with required size of nails as approved by Engineer - in - charges 12.70mm PVC conection with brass union nuts CP coated 31.75mm brass plumber union 12.70mm NP bib tap 300 gms seiko or equivalent, P trap or S trap of indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc. complete including cost,all taxes and conveyance of all materials to site,cost of CC bed, labour charges,and seigniorage charges etc., complete for finished item of work . Supply and Fixing 10 Litres capacity Single Flush white PVC low level flushing system parryware, slimline with internal components and short bend including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for all floors.
1
-
1905.35
... More
Supplying and fixing indian make flat back wash hand basin (HSW/Parrywar/ Neycer) 1st quality conforming to IS: 2556-part-4:1972 of size 550mm×400mm with waste fittings like rubber plug, chain, 32mm nominal size C.P. Fitting with parallel pipe thread conforming to IS: 2963-1979 and fitted with 15mm nominal bore Chromium plate pillat tap of 1st quality Indian mke 400 grams Seiko/Esso or equivalent complete with standard CI brackets includint wooden block , 1 No. 12.70mm PVC connection with brass union nuts CP coated , 1No. 12.70mm NP bib tap 300gms seiko or equivalent including cost and conveyance of all materials to site, and all labour charges etc., complete for finished item of work .
8
-
2971.15
... More
Supply & Fixing of Jaquar make chrome plated Metro pole flush valve concealed type with cover plate 40mm size including all cost and conveyance of all materials to site, all labour charges etc., complete for finished item of work.
8
-
3623.2
... More
Supply and fixing of white glazed flat back bowl urinals of size 590 x 375 x 390 mm with internal rim flushing mm fixied with screws complete inidan make (Parry/Neycer/Hindware/CERA) conforming to IS 2556 -1995 as approved be Engineer - in - charge 12.7 mm PVC connection with brass plumber union nuts CM Coated. including 12.70 mm push cock 1st qulaity of approved make including supply & fixing 31.75 m dia PVC flexible waser pipe of 914.40 mm lenght of 1st including cost and conveyance of all materials to site labour charges etc., complete for finished item of work for all floors
8
-
920.3
... More
Supplying and fixing NP bib taps of size 12.70mm dia of india make Seiko or equivalent including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors for 400 gms at
10
-
253.4
... More
Supplying and fixing of Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make Seiko including cost and conveyance of all materials, labour charges etc., complete for finished item of work in all floors
20
-
396.55
... More
Supplying and fixing of SWR/PVC pipes (as per ISI standards) 4 Kg/Sq.cm prince/sudhakar or any ISI brand and fixing all special such as plian bends. Off sets. Door bends, single juctions, double junctions as per site requirement, fixing with PVC clamps, if necessary with required number of Bombay nalls including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work in all levels.(APSS NO.1302 1319&1326) For75mm dia 3 Mts single socket
30
-
81.8
... More
Supplying and fixing of SWR/PVC pipes (as per ISI standards) 4 Kg/Sq.cm prince/sudhakar or any ISI brand and fixing all special such as plian bends. Off sets. Door bends, single juctions, double junctions as per site requirement, fixing with PVC clamps, if necessary with required number of Bombay nalls including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work in all levels.(APSS NO.1302 1319&1326) For 110mm dia 3Mts single socket at .
50
-
155.3
... More
Supplying and fixing Ashirvad/Astral flow guard for equivalent CVPV pipes with fittings in ground or on wall including cost of tees , elbows, bends, reducers, couplings, runnings joints, union flanges, unions etc. with necessary excavation in all types of soils except rock required blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for 22.20mm dia CPVC SDR 13.50 at .
50
-
96.6
... More
Supplying and fixing Ashirvad/Astral flow guard for equivalent CVPV pipes with fittings in ground or on wall including cost of tees , elbows, bends, reducers, couplings, runnings joints, union flanges, unions etc. with necessary excavation in all types of soils except rock required blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for 28.60mm dia CPVC SDR 13.50 at .
50
-
139.75
... More
Supplying and fixing Ashirvad/Astral flow guard for equivalent CVPV pipes with fittings in ground or on wall including cost of tees , elbows, bends, reducers, couplings, runnings joints, union flanges, unions etc. with necessary excavation in all types of soils except rock required blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials to site, labour charges etc., complete for finished item of work for 41.30mm dia CPVC SDR 13.50 at .
50
-
302.25
... More
Supplying and fixing PPR Ball value as per ISI class -1 Indian make heavy type including cost and conveyance of all materials to site and all labour charges etc., complete for finisined item of work. 25mm PPR Ball valve .
7
-
235.2
... More
Supplying and fixing PPR Ball value as per ISI class -1 Indian make heavy type including cost and conveyance of all materials to site and all labour charges etc., complete for finisined item of work. 40mm PPR Ball valve .
7
-
505.6
... More
Supply & Fixing of 22 dia RCC Cover for manhole with nominal reinforecement 3 thick with hooks for lfifting including cost and conveyance of all materials, labour charges etc., complete for finished tiem of work
1
-
719.2
... More
Supply and fixing PVC Nahany Traps 75mm dia
3
-
360.2
... More
Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work including seignerage charges excluding dewatering charges etc., complete for Foundation of Building.(APSS No. 308)
15.75
-
173.7
... More
Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (C:FA:CA) using 40mm size HBG (IS383, 1970) metal from approved quarry including c/c like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations (APSS No. 402)
0.63
-
4028.55
... More
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work.Bottom Slab
0.79
-
1238.45
... More
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of workSide Walls
3.82
-
5061.09
... More
Supply and placing of the VRCC M20 Design Mix Concrete corresponding to IS 456 using Weigh Batcher/ Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work Top Slab with manhole
0.79
-
1238.45
... More
Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 12mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work (APSS No. 901 & 903).
7.5
-
408.15
... More
Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including overlaps and wastage, where they are not welded.
120
-
62.2
... More
Providing & Placing on Terrace (at all floor levels) Polyethelene Water Storate Tank with Double Layer approved brand & Manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fi
2000
-
5.7
... More
Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work including seignerage charges excluding dewatering charges etc., complete for Foundation of Building.(APSS No. 308)
0.55
-
173.7
... More
Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (C:FA:CA) using 40mm size HBG (IS383, 1970) metal from approved quarry including c/c like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations (APSS No. 402)
0.55
-
4028.55
... More
Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 225 x 100 x 60 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 20 kgs, Gypsum of 5.0 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 75 kg/sqm for walls for Superstructure walls.
0.04
-
5930.15
... More
RCM facia 5cm thick in CM (1:3) for drop walls, fins with rabbit wire mesh & nominal reinforcement as directed by Engineer-in-charge with dubara sponge finishing, including cost & conveyance of all materials to site, seigniorage charges, sales & other taxes on all materials, operational & incidental, cost and conveyance of cement, wire mesh, water to work site, centering, scaffolding and form work, lift charges etc., complete for finished items of work but excluding cost of steel & its fabrication charges, for finished item of work. (APSS No.403&903)
2.38
-
1284.25
... More
Plastering with CM(1:5) Prop: 12mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)
6.71
-
282.7
... More
Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707) in All Floors
4.77
-
523.35
... More
Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)
10
-
123
... More
S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931
10
-
229
... More
Drilling of 162mm / 6½ mm dia bore wells by down the Hole Hammer drilling in all formations to a depth as desired by the dept and remaining the bore to suit insertion of suitable dia PVC casing pipe of 6 kg/Sq.cm. including insertion of casing pipe and any other relevant material required up to the depth as directed by the department including cost of transportation of rigs and supporting vehicles from village to village and bore development (flushing the bore well at an average pressure of 100 RSI) conducting yield test, crew charges cost of consumables and all other charges required complete but excluding taxes, cost of PVC casing pipe & inclusive fixing of Hand pump. The entire work has to be done to the satisfaction of departmental authorities and as per IS 2800 part I&II–1979 and the contractor has to furnish the litho logical logs to the department in
100
-
360
... More
Cost of 180 mm dia /6 kg UPVC casing pipes to potable water supply confirming to IS 12818/1992 as amended form time to time including transportation all taxes etc., ( ISI standard make like Sudhakar etc.,) should be supply.
30
-
635
... More
Supply and Transportation of 2 HP/ 25 Stage 5star rated submersible motor pumpset,
confirming to IS 8034 and motor confirming to IS 9283 with water proof
winding,Pump shall be suitable for various delivery head and discharge with
stainless steel shaft.Motor suitable for working on 240V ± 10% , SinglePhase 50
Hz AC supply,etc complete for 4" Bore well.
Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/Aryen Varsha elec-5.41 e
1
-
243000
... More
Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work (APSS No. 901 & 903).
70.38
-
359.25
... More
Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 225 x 100 x 60 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 20 kgs, Gypsum of 5.0 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 75 kg/sqm for walls for Superstructure walls.
4.52
-
5219.5
... More
Ornamental Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904)
68.85
-
324.35
... More
Plastering with CM(1:4) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906)
39.33
-
256.25
... More
Filling with sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
92.25
-
673.2
... More
Flooring with Polished Black Kadapa slabs minimum of 15 mm thick (0.457M x 0.457M) set over a base coat of CM (1:8), 12mm thick (joints of stone must be flushed) over C.C. bed already laid or R.C.C. roof slab only after it is properly cured, cleaned, moistered and where necessary treated with neat grey cement slurry of honey like consistency spred at3.3 kgs of cement for 1 sqm. and jointed with neat cement paste to full depth, including cost and conveyance of all materials like cement, sand, water, flooring stones etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as dressing of flooring stones to the required sizes, mixing of cement mortar, laying, jointing, curing, lift charges etc., complete for finished item of work.(APSS No.703 & 701)
54.27
-
461.95
... More
Supply and fixing of M.S.Door of size 1.20X2.10Mts made by 50x50x3mm "L"angular frame and 25x25x2mm "L" angular for shutters frame with 18 gauge flat sheet including cost and conveyance of all materials and labour charges etc., complete.
315
-
70.58
... More
Supply and fixing of M.S.Windows of size 1.50X1.35Mts made by 50x50x3mm "L"angular frame and 25x25x2mm "L" angular for shutters frame with 18 gauge flat sheet including cost and conveyance of all materials and labour charges etc., complete.
855
-
70.58
... More
Supply and fixing of M.S.Ventilator Grills of size 1.50 x 0.60 & 1.20 x 0.60 mts including cost and conveyance of all materials and labour charges etc., complete.
144
-
70.58
... More
Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks, chairs, overlaps, spacers, dowels, wastage etc., and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126)
985.32
-
50.9
... More
Painting to New walls with two coats of acrylic emulsion paint weather proof waterbased, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floor INTERNAL for ACR
400
-
123.95
... More
Painting to New walls with two coats of acrylic emulsion paint weather proof waterbased, modified acrylic with silicon additives exterior grade having VOC (Volatile Organic Compound ) content less than 50 grams/ liter of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors EXTERNAL
400
-
121.8
... More
Painting to New Iron work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ liter over an existing steel primer including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors
300
-
81.85
... More
Painting to New Wood work with two coats of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ liter over an existing steel primer including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).in All Floors
100
-
146.1
... More
Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable in existing pipe with 6A / 10A 1 Way 1 Module Modular Switch control with 6 Module Hot Dip Galvanized modular type Metal Box covered with 6 Modular Cover Frame, 3 Plate Jumbo Ceiling Rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings.Copper wire make: Gloster/ Polycab / Bonton / V-Guard / GM / Million /
HPL / Goldmedal / Finecab /Fortune Art / Kundan cab/Sudhakar/Orbit/Standard/Tamra/Anchor. Modular Switch, Socket, Metal box & Cover frame Make:Legrand Arteor / Schneider Zen celo/ Crabtree Murano / GM-Zenova/Goldmedal (i-Push).Ceiling Rose Make:Anchor / Gold Medal Olive / Million Zoom
70
-
469.03
... More
Supply and Fixing of 16A 3pin and 6A 3pin plug socket with and 16A switch control duly recessed in wall with MS switch deep box of 6" x8" x2 1/2" size covered with hylam sheet including earth connections and all labour charges etc., complete.
Makes : G
6
-
499.1
... More
Supply and fixing of 6A / 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A / 10A 1 Way 1 Module Modular Switch control on a Common switch board with with 3 Module Hot Dip Galvanized Modular Metal Box covered with 3 Modular Cover Frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete.Modular Switch, Socket, Metal box & Cover frame Make:GM Four-Five / Legrand Arteor / Schneider Zen celo / MK Blenge.
6
-
373.03
... More
Supply and run of 2 of 2.5 sq.mm PVC insulated flexible copper cable and one run of 1.0 sq.mm flexible copper wire for earthing in existing MS conduit pipe for circuits including labour charges (phase neutral and earth) etc., complete as required for swi
100
-
59.12
... More
Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with Electronic Ballast Chokes and all standard accessories with 36/40W tube. Makes : Wipro / G.E. / Phillips / Crompton / Bajaj/Havells/HPL/Halonix
6
-
760
... More
Supply of 1200 mm (48") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories.
Makes: Crompton Aura / Bajaj R Gold / Havells Festiva / Usha Premium.
9
-
2020
... More
Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.
9
-
145.75
... More
Supply of 1 Module Modular type Electronic step type Fan Regulator with 2 Module Hot Dip Galvanized Modular Metal Box covered with 2 modular cover frame etc., complete. Makes : Legrand Arteor / Schneider Zen celo/ Crabtree Murano or Amare/L&T-englaze/ GM-Zenova/Goldmedal(i- Push)
9
-
360
... More
Supply and fixing of concealed box PVC/MS with hook for fan
9
-
35
... More
Supply and Fixing of 7/20 Service Wire including all materials and labour charges etc. complete.
50
-
63.5
... More
Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes
1
-
3103.13
... More
Supply and fixing of 4 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 12 Nos S.P.out goings and for 1 No 4 pole Incommer including internal connection and labour charges for flush mounting etc., complete. Incommer: 40A FP Isolator-1No. Outgoing: 10kA-6-32A SP MCBs - 12 Nos DB Makes :ABB/Standard / Havells-euro II / HPL (Techno) / Indo Asian / C&S / L&T/GM /Gold Medal/Anchor/Salzer, Make: Milltec / Sputnik / Benlo / Vimal/Polycab/ Precision/Amron.,.MCB Make:Legrand-DX3 / Schneider-Acti9/Hager-h3/ Siemens-5SX4/ Crabtree-Xpro/L&T-AU
1
-
6291
... More
Supply and Fixing of 25mm outer dia heavy (2.20mm thickness) grade, FRLS with IS:9537 part 3 regid PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Makes : Precision/Universal& Marudhar/VIP / GoldMedal / Million plast / GM / Sudhakar /Anchor/ Polyline/ Polycab/ Orbit/AKG
140
-
67.18
... More
( Rupees in Ninety Six Lakhs Thirty Six thousand and Sixty three Only)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements