Andhra Pradesh Education And Welfare Infrastructure Development Corporation Tender

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of different diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in First floors.

Providing and fixing of Openable Windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick galvanized as per IS 277 with Zinc if 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48x50 mm, centre mullion of 48x50mm, section for shutter of 48x25 mm and the fixed glass beading section should be 12x12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars / grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos, of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete / masonry wall by means of self expanding screws, including 10mm Square guard bars with 6" (152.4mm) pitch etc.., complete for finished item of work. Centre fixed both side openable shutter window 5'0"x4'0" (1524mm x 1219.2mm). Outer frame section size of 48x50mm. Shutter frame section size of 48x25mm. Mullion section size of 48x50mm. Fixed beading section size of 12x12mm including cost and conveyance of all materials and all labour charges etc..., complete for finished item of work

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.

Providing and fixing of 28-30mm thick solid wood polymer Composite (WPC) single extruded door shutter with 3mm top and bottom rigid layer with an over all density of 750kg / Cum. It will be fixed to the frame using 3 inch / 4 inch hinges. Aluminium of 4 hinges will be required for fixing the door with frame including cost and conveyance of all materials and all labour charges etc.., complete for finished item of work.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer -in- charge, finishing, curing, etc., complete for finished item of work for First Floor (APSS 901,903 & 904)

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete for finished item of work for First Floor . (APSS 901,903 & 904)

Supply, installation and commissioning approved make floormounted close coupled EWC suit CASCADE model 'P' or 'S' trip with dual flush procelain cisten fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rudder bufferand cap 15 mm angle stop cock 450mm long PVC interconnection pipee wall flanges all of approved make etc.., complete for finished item work in all respects: Special colour - Grade-III including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work.

Supply & fixing indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS: 2556-Part-4:1972 of size 550x400mm with waste fittings like rubber plug, chain, 32mm nominal sixe C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominnal bore Chromiium Plated Pillar Tap of 1st quality Indian Make 300 grams Seiko/Esso or equivalent complete with standard CI brackets including wooden block including cost and conveaynce of all materiasl and all labour charges etc., complete for finished item of work.

Supply and fixing of 12.70 NP Bib Taps 300 Grams including cost and conveyacne of all materials and all labour charges etc., complete for finished item of work

Supply and fixing of 110mm PVC / SWR pipe 4kgs/cm2 including cost and conveyance of all materials and all labour charges etc., complete work for finished item of wrok

Supply and fixing of 75mm PVC / SWR pipe 4kgs/cm2 including cost and conveyance of all materials and all labour charges etc., complete work for finished item of wrok

Flooring with Non Skid Full body Ceramic Floor Tiles of 300x300mmand 7 to 8 mm thick 1st. quality of any shade as approved by Engineer -in- charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work for First Floor .(APSS No.701 & 707) inculding CC Bed

Dadooing to walls with white glazed full body ceramic wall tile of size 200x300mm / 245x325mm and 6mm thick 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work for First Floor (APSS No.701 & 707)

Flooring with Soluble Salt Porcelain Polished Vetrified Tile of size 600x 600mm and thickness between 8 to 10mm thick 1st. quality of any shade as approved by Engineer -in- charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work for First Floor.(APSS No.701 & 707)

Providing Skirting with Soluble salt procelain vitrified tiles screen printed and polished of size 600x600mm and thickness between 8-10mm 1st. quality of any brand as approved by Engineer -in- charge set over a base coat of CM (1:5), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work for First Floor .(APSS No.701 & 707)

Supply and fixing of 28.60mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Supply and fixing of 20mm dia, 609.6mm long CP towel rods with brackets and aluminium screws including cost and conveyance of all materials and all labour charges etc.., complete for finished item of work

Supply & fixing of NP soap dish heavy type of approved make ISI quality with NP screws etc.., complete including cost and conveyance of all materials and all labour charges etc.., complete for finished item of work

Painting to walls with two coats of Acrylic Emulsion paint Interior Grade of superior quality of approved brand and shade over base coat of cement primer making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912)

Painting to walls with two coats of Acrylic Emulsion paint Exterior Grade of superior quality of approved brand and shade over base coat of cement primer making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912)

Supply and fixing Gyp Board Fine Line Grid false ceiling (GS-FLC-4.6 as per India Gypsum) in size 600mmx600mm using 12.50mm thick/9.5mm thick Gyp Board sheet tiles of size 595mmx595mm or 595mmx1195mm conforming to IS 2095-1982 fixing to Gyp steel precoated GI wall angle of size 25mmx25mmx0.70mm thick along the perimeter of ceiling screw fixed to brick work/partition at 610mm c/c and suspending the frame work using precoated GI Tee section (24mmx38mmx0.70mm) from soffit at 1220 mm c/c fixed with GI soffit cleat, rawl plugs and steel expansion fasterners and collecting clip to the GI T section with 4mm dia GI rod with galvanised speing steel level clip of PVC universal holding clips system at 1200 mm c/c and fixing the 12.50mm/9.50mm Gypboard sheet tiles of size 595mmx595mm or 595mmx1195mm and finishing two coats of dry wall top coat complete for finished item of work as per idia gypsum ltd specification