Andhra Pradesh Education And Welfare Infrastructure Development Corporation Tender

Dadooing to walls with white glazed full body ceramic wall tile of size 200x300mm / 245x325mm and 6mm thick 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707) in All Floors

Supply and fixing of 22.20 mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Supply and fixing of 28.60mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Supply and fixing of 34.90 mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Supply and fixing NP Bib Taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyacne of all materials and all labour charges etc., complete for finished item of work.for 300 grams

Supply and fixing of Orssia pan of size 580x440mm white glazed WC 1st quality ISI make parry, Neycer & Hinduwere make conformeding IS 2556-part 3-1981 with P and S trap with brick masonry seat including cost and conveyance of all materials and all labour charges etc.., complete for fhinished item of work

Supply & fixing indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS: 2556-Part-4:1972 of size 550x400mm with waste fittings like rubber plug, chain, 32mm nominal sixe C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominnal bore Chromiium Plated Pillar Tap of 1st quality Indian Make 300 grams Seiko/Esso or equivalent complete with standard CI brackets including wooden block including cost and conveaynce of all materiasl and all labour charges etc., complete for finished item of work.

Supply, installation and commissioning approved make floormounted close coupled EWC suit CASCADE model 'P' or 'S' trip with dual flush procelain cisten fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rudder bufferand cap 15 mm angle stop cock 450mm long PVC interconnection pipee wall flanges all of approved make etc.., complete for finished item work in all respects: Special colour - Grade-III including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work.

Construction of Inspection chamber 457.2 mm X 457.2 mm (1'6" X 1'-6") brick masonry CM (1:6) prop. Msonry inspection chamber upto 914.4 mm (3'-0") and fitted with light weight 457.2 mm X457.2 mm CI frame and cover 20 kgs. Including cost and conveyance of all materials and all labour charges etc., complete

Supply and fixing of 110mm PVC / SWR pipe 4kgs/cm2 including cost and conveyance of all materials and all labour charges etc., complete work for finished item of wrok

Providing & placing of terrance ( at all floor) polytech water storate tank with double layer approved brand & manufacture with cover and suitable locking arrangements and making necessary holes for inlet andoutlet and over flow pipe wigth out fittings and base supports for tank including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of of 33 x 56 mm Box section paneled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket. corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete /masonry wall by means of self expanding screws including 10 mm square guard bars with 6" pitch of Ventilators: Fixed louvers 2'-0" x 2'-0" (609.6x609.6mm)(Box section) outer frame section size of 33 x 56 mm complete for finished item of work.

Wiring with 2 runs of 22/0.3 mm (1.50sq.mm) fire Retardant (FR) PVC insulated fexible copper cable (ISI Make) and 1 run of 1.50sqmm of 22/0.3mm flexible copper cable for run of earth in existing pipe with 6 A one way one modular switch, modular ceiling rose, and 8 modular covering plate to switch control box including all labour charges etc., complete for modular light, bell, fan and exhaust fan points, in NON -Residential Building .

Supply and fixing of Batten holder/slenting holder in lieu of ceiling rose of light point and fixing of 0.50 W LED Lamp complete with all connection and labour charges etc., complete .for finished item of work

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of =100 lumens/watt , PF0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty.

Supply and run of 2 of 2.5 sq.mm ( 36/0.30 ) PVC insulated flexible copper cable and one run of 1.0 sq.mm (14/ 0.30 ) flexible copper wire for earthing in existing MS conduit pipe for circuits including labour charges (phase neutral and earth) etc., complete as required for switch board circuit mains.

Supply and fixing of 6A 3 pin 2 modular socket with 6A switch one way one modular switch on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete for finished item of work.

Supply and Fixing of 16A 3pin and 6A 3pin plug socket modular with and 16A switch control modular duly recessed in wall with common Galvanized Metal switch deep box covered with cover plate including earth connections and all labour charges etc., complete.

Supply, Manufacturing and Fixing of Aluminium anodized fly proof mesh door single shutter to existing door frame using alround and middle horizontal sectin frame of size 44.70x18.50 x1.20mm thick and fixed to frame with required 0.20mm thick (304 guage) SS PC black mesh and binding with required EPDM mesh Gasket (beading) including cost and conveyance of all materials and fixtures such as 4Nos., of special grade PC hinges, 2Nos., of 150mm long aluminium tower bolts, 2Nos., of 100mm long aluminium handles and 2Nos., of Magnetic catches with required screws and specials like joint clips including cost and conveyance of all materials and all labour charges for fixing in position as directed by the departmental officers etc., complete for finished item of work.

Supply, Manufacturing and Fixing of Aluminium anodized fly proof mesh window shutter to existing window frame using alround and middle horizontal section frame of size 20.90x9.45 x0.86mm thick and fixed to frame with required 0.20mm thick (304 guage) SS PC black mesh and binding with required EPDM mesh Gasket (beading) including cost and conveyance of all materials and fixtures such as 2Nos., of special grade PC hinges, 1No. of 75mm long aluminium tower bolt, 1No., of 100mm long aluminium handle and 1No., of Magnetic catche with required screws and specials like joint clips including cost and conveyance of all materials and all labour charges for fixing in position as directed by the departmental officers etc., complete for finished item of work.

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work for First Floor (APSS No. 901 & 903).

Providing supply and application of chemical treatment flexible acrylic polymer cementicias water proofing sealant treatment to Roof Slab, after thoroughly scraping and brushing the surface to remove all loose powdered materials of the Roof Slab, before primary coat you have applied filling cracks with required chemicals as directed by the Department, after that applied primary coat of brush bond acrylic latex water proofing adhesive cum bonding agent of hydroment 476 create HS / Bosco create chemical or equivalent with 1:4 ratio i.e.., 1 lit. Hydroment 476 create HS / Bosco create chemical and 4 Lt. Water in pigment to apply brush bond to Roof Slab after completion of the primary coat and dry the surface to apply the second coat of brush bond of flexible acrylic polymer cementicias (Bostik or other equivalent) of two components i.e.., powder and chemical liquid in pigment to apply the surface of the roof slab. After two hours later to apply the brush bond of acrylic latex chemical with cement in ratio 1:2 i.e.., 1 lit. acrylic latex in 2 Kgs of cement with pigment to apply the brush bond to roof slab including cost and conveyance of all materials and hire charges of scraping, brushing, cutting, browing machine and all labour charges for scraping, brushing, browing, applying charges etc.., complete as directed by the Department for finished item of work.

Supply and fixing of MS Grills using required Structural steel such as MS Angular, Channels, Tees, Flats, etc.., including cost and conveyance of all materials and all labour charges for cutting, welding, jointing in place in position etc.., complete for finished item of work

Supply & fixing pre-painted galvalium trepizoidal profile roofing sheets with 0.50mm thickness, coating Alu-zinc coating AZ 150 GSM. Tensile strength 550 MPA, paint coating: Regulat modified polyster painting. THickness (top) 18-20 microns, (Bottom) 5-7 microns including C/C of all materials like sheets, J bolts, bitumen washers etc.., with or without ridge with sales & all other taxes & all labour charges etc.., complete for fixing sheets in position

Brick Masonry in superstructure with CM (1:8) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work for Second Floor. (APSS No. 501 & 504).