Andhra Pradesh Education And Welfare Infrastructure Development Corporation Tender

Supply, delivery and assembling at site Staff Table with the following specifications: The over all dimension should be 1200 mm x 590 mm x 750 mm. The table top should be 18mm thick with Pre-Laminated Board (PLB), of approved quality and shade, Grade II Type II conforming to IS:12823. The edges should be sealed with 2mm thick hot preessesd PVC beading. The understructure should be top frame C section 40 x 40 mm 1 mm thickness supported alround tubular frame of CR Round tube of 25.4 mm , 1.2mm thick confirming to IS 513. The tubular frame should be made of CR Round Tube of Dia 25.4mm, 1.2mm thick. For storage, the Table should have 3 drawer unit the overall dimention 350 (w)x 430(H)x 560(D) mm in which the shell and drawer tray shall be 0.5 mm thick CRCA MS, drawer front of 0.8 mm thick CRCA MS sheet, provided with 6 Lever Cam Lock and in built plastic handles. Steel should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per IS std 3618 1996.Epoxy polyster powder coating as per IS101. The total cost of Unit shall include cost of all materials, manufacture, transportation to site assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes. complete for finished item of work. The item shall carry a warranty period of 3 Years ( 36 months) from the date of supply

Supply, delivery and assembling the site ‘S’ Type Chairs with arms: Seat and back nylon cane netted, seat and back frame made of CR Tube/Wooden 25.4mm, 1.22 mm thickness. Seat size 46 cm x 46 cm back size 46 cm (W) x 50 cm (H), back is (Curve model) back size 46cm/38cm excluding gap The understruture assembly is a cantilever type frame made of CR Tube dia 25.4 cm 14 guage 2 mm thickness arms shall be of injection moulded foam poly propylene hands with PVC bush. Steel should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per IS std 3618 1996. Epoxy polyster powder coating plain mat brown as per IS 101. The total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloding and assembling charges at different floor levels of the building,exclusive of all taxes, complete for finished item of work. The item shall carry a warranty period of 3 Years (36 months) from the date of supply

Supply, delivery and assembling at site Reading / Demo Tables with the following specifications:The over all dimentions of the Table shall be 1800X900X740mm. The table top is to be 25 mm thick, Pre-Laminated Board (PLB), Grade II Type II conforming to IS:12823 of approved quality and shade and edges shall be half rounded and sealed with 2mm thick hot preessesd PVC beading. The C-frames shall be 1.6 mm thick M.S, supporting the Top. The legs shall be of dia. 38.1, 1.6 mm thick M.S ERW tube. The table also should consist of 2 foot rests of Size 50 x 25mm thick with 2 internal support and it should be connected to legs. Steel should be as per IS 513, should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per IS: 3618- 1996. Epoxy polyster powder coating 45 dft as per IS 101. The total cost of Unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work. The item shall carry a warranty period of 3 Years ( 36 months) from the date of supply.

Supply, delivery and assembling at site Computer Tables for students with the following specifications: The over all dimentions of the Table shall be 1800X450 X750mm. The table top is to be 25 mm thick, Pre-Laminated Board (PLB), Grade II Type II conforming to IS:12823 of approved quality and shade and edges shall be half rounded and sealed with 2mm thick hot preessesd PVC beading. The C-frames shall be 1.6 mm thick M.S, supporting the Top. The legs 6 no.s shall be of dia. 38.1, 1.6 mm thick M.S ERW tube. The table also should consist of 2 foot rests of Size 50 x 25mm thick with 2 internal support and it should be connected to legs. Steel should be as per IS 513, should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per IS: 3618- 1996. Epoxy polyster powder coating 45 dft as per IS 101.The keyboard tray 2 no.s shall be of size 710mm(front width)x 300mm(depth) approximately is to be provided with end fittings mad from minimum 2mm thick MS steel mounted on either side and the keyboard tray shall be easily slideable, provided with two telescopic channels with balls. The total cost of Unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work. The item shall carry a warranty period of 3 Years ( 36 months) from the date of supply

Supply, delivery and assembling at site Computer Chair as should be drawn with following specification. Overall dimensions should be 430 mm (W) x 450mm (D) x 800mm (H) with sheet height (SH) 460mm. The seat and back shall be made of 1.0mm 20 Guage thick CR. Perforated sheets. The seat size is 390mm (W) x 415mm (D) and back size 390mm (W) x 215mm (H) the made of the understructure frame CR tube of 25.4 mm x 1.6 mm thickness 16 guage, powder coated (DFT 40-60 microns). The steel should confirm to IS 513 and for durability, steel should undergo pre treatment process and phosphate for better adhesion of paint as per IS 3618-1996. Chair is with arms exclusive of all taxes. The under structure should be provided with black PP injection moulded ferrules. Hard rubber bushes should be provided to rest the chair on floor. Epoxy polyster powder coating DFT (Dry Film Thickness) of 45 microns as per IS 101. The total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloding and assembling charges at different floor levels of the building, Exclusive all taxes etc., complete for finished item of work. The item shall carry a warranty period of 3 Years (36 months) from the date of supply

Drawing Steel stool with wooden top , Height=762mm :Teak Wood Top: Dia 356x 25 MM, S.S Pipe Dia 25 MM x 16 SWG. , Across Pipe : Dia 20 MM at Bottom of 4 Leg joint Across Pipe : Dia 20 MM at Bottom of four Leg joint each other with S.S Gas wielding All around.Across Distance between Leg should be 500 MM at the outside of the pipe.Top should be Good Quality of wooden Polished and finishing. exclusive of all taxes General Tolerance: 2MM

Supply, delivery and assembling at site Almariahs (Plain model Storewell) of size: 1980x900x450 mm, with the following specifications: Store well shall be 4 nos. Fixed shelves of inside shelves size 878 x 420 top bottom LH and RH side and back all parts CR sheet 1 mm thickness with mounting. Die cast recess type handle with 3-way locking mechanism should be provided with levelers. Mild steel as raw material should be used, cold rolled close annealed steel used for thickess 0.6 to 1.2 mm range as per IS – 513 1994( reaffirmed in 1998). Grade ‘D’ or “DD’ quality. Chemical composition, tensile properties, bend rest, surface, flatness, hardness as per IS-513 1994. Hot rolled steel used for thickness 2.0 to 3.15mm range as per IS-1079 1994 ‘D’quality or IS-10748 1995 Grade-II. Chemical composition, tensile properties, bend rest, surface flaws, roll mark, dent & lines etc. Painting shall be epoxy powder coated paint 55 microns. The total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes., complete for finished item of work. The item shall carry a warranty period of 3 Years (36 months) from the date of supply

Supply, delivery and assembling at site Glass Door Storewel of Size: 1830 x 916 x 486 mm, with the following specifications: Glass Door Storwel madeup of MS CRCA steel Grade D as per IS 513: 1994 and made of multi-bend construction and inter-locking design and full height length over lapping doors and sides, with two way bolting mechanism and see through Glassdoor, Anti-corrosive treated components and oven baked powder coating process. It should consists of removable RH & LH sides and back material thickness 0.9 mm. Removable RH & LH see through glass main door material thickness 0.9 mm, with 4 plain adjustable shelves of thickness 0.8mm and 3mm thick see through glass(4 nos). The chemical composition, tensile properties, bend test, surface , flatness, hardnes shall be as per IS-513:1994. Steel should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per IS 3618 :1996. Epoxy polyster powder coating min 40 dft as per IS:101. The total cost of Unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work. The item shall carry a warranty period of 3 Years ( 36 months) from the date of supply

Plastic Chair of standard size of standard make PLASTIC CHAIR without arms The total cost of unit shall include cost of all materials, manufacture, transportation to site including loading, unloding and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work

Supply, delivery and assembling at site Slotted Angle Racks of size 1800x900 x 450mm. The Panels shall be of size 900x450mm. Each Panel shall withstand a load of 100 kg/sqmt UDL. The Angles of size 40x40x2mm shall be in a single piece of length 6', without joints and shall confirm to IS: 5986 (ST 42). Open racks with Side straps on two sides(Left and Right), 150mm heigh. The Panels shall be made up of mild steel sheets, not less than 0.8 mm thick and shall confim to IS 513 D. Epoxy Polyester powder coating of BS Grey colour and shade shall be applied to all components with an average dry film thickness of not less than 35 microns.The total cost of Unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes. complete for finished item of work. The item shall carry a warranty period of 3 Years ( 36 months) from the date of supply

Wall Supporting Extendable 12/20 Ft. Alu 1 Numbers Wall Supporting Extension 12/20 Ft. Aluminium Ladder. Aluminium Wall Supporting Extension Ladder for Electrical /Industrial Works at a height: # Materials of Construction: Manufactured from high tensile aluminium alloys. # Accessories: Fitted with manila ropes, pulley, safety locks & solid rubber shoes. # Size of Aluminium 'C' Sections: 66 mm x 31.75 mm× 3.18 mm. Outer width :15” ,# Rungs or Steps: 1" dia. Non-slip corrugated Rung pipe at 10" / 12" centre to centre. # Other features: Should Light in Weight, Fire Proof & Dust Proof. # Heights: Closed position- 12 ft. and extended position-20 ft. in 2-Sections. # Conforms to IS 733 and IS 1285 # Ø Minimum load bearing capacity : approx 150Kgs exclusive of all taxes

Supply, delivery and assembling of PODIUM of size 700 (W) x 600(B) x1200 (H) inner material is made up of high density MDF with fine surface of papaer spray-paint with High quality, fine workmanship and fashionable design, Unique material combination, simple colour matching, Smooth, bright lines and sides as per the Isomertic view shown in the plan . The total cost of Unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges , exclusive of all taxes complete for finished item of work and as directed by Engineer-in-Charge. The item shall carry a warranty period of 3 Years ( 36 months) from the date of supply

Supply and fixing of ceramic steel Green Chalk Boards of size (2400mmx 1200mm with vitreous enamel steel sheet made of 0.3mm to 0.40mm thick “Ceramic Steel Sheet (Belgium Make)/ Porcelain Enamel Steel Sheet (Japan Make)” engraving on surface (having vitreous enamelled coating both sides), 0.095mm thick top surface coating and back surface coating thickness of 0.03mm supported with 9mm thick MDF Board make : (Greenlam / Merino / Action Tesa) back support and backing with 0.25mm thick galvanized steel sheet make : (TATA / JSW / Sail / Vizag Steel) fixed with anodized Aluminium frame 20mm wide and 1.2mm thick and board shall be given additional support at four sides with Aluminium J-Clamps (8 Nos.) and Duster Holder of minimum inner size of 18cm X 6 cm to hold duster and Chalk pieces made of PVC material ( Hard Unbreakable Material) including cost & conveyance of all materials and all labour charges like loading, unloading, including GST and all taxes etc., as applicable from time to time and fixing of Green Boards at college points including all incidental charges etc., complete for finished item of work. Excluding GST

Supply & Placing Dual Desk (3-seater) Type-V for Govt. Polytechnic (Govt. Educational Institutions) (Multi-Color) (DWAWING ENCLOSED SEPARATELY) The overall dimensions of Dual Desk (3-seater) Type-V will be W 1600 mm x D 930 mm x H 822/800 mm (For table top). The seating bench height shall be 472 mm. The desk shall be manufactured as per the specifications mentioned below: 1.Table top shall be made up of 18.0 mm thick plywood (tolerance as per IS 303) of MR Grade OSL (one side shall be laminated, and other side shall have balancer finish). Table top dimensions shall be W 1549.2 mm x D 380.0 mm. Edge towards bench shall be post formed with round edge. The remaining three edges must be sealed with 2mm thick PVC edge banding tape. Edge band must be trimmed on edges and corners. Make of Plywood: Greenply / Century / Kitply. Make of Laminate & balancer: Marino / Greenlam / ASIS / Century. 2.Side frame structure: Made of CRCA press-formed section having two Nos of 50mmx25.4mm Rectangular Pipe sections 1.2mm thick and joined by “C “channel of size 65mmx25.4mmx25.4mm and 1.2mm thickness and MIG Welded to rectangular pipe of 25.4 mm x 50.0 mm x 1.2mm thickness (890mm Bottom length) by using extra stiffeners of C-section made up of 62.60mmx 25mmx25mm & 3.0 mm thickness sheet and 100mm long. Side frame structure top pipe 50mmx25.4mm x1.2mm Rectangular Pipes with 250 mm long (as shown in drawing section-A) covered with CRCA sheet 165mmx134.60mmx1.2mm including top folding, and 105mmx161.20mm x1.2mm including top & bottom folding and 110mm x 137.2mm (average) x 1.2mm including top & bottom folding as per drawing appended. Make for CRCA sheet – ESSAR / TATA / SAIL / JINDAL. Proposed desk should be ROHS certified from INTERTEK / UL. 3.Seat and back rest frame structure: Made of CRCA press formed section having two nos’ of 50mm x 25.4mm Rectangular pipe sections 1.20mm thick and joined by C-channel of size 65mm x 25.4mm x 25.4mm and 1.20mm thickness and MIG welded to rectangular pipe of 25.4 mm x 50.0 mm x 1.2mm thickness (890mm Bottom length) by using extra stiffeners of C-section made up of 62.60mmx 25mmx25mm & 3.0 mm thickness sheet and 100mm long. MIG welded to 25.4 mm diameter with 1.2 mm thickness MS pipe at Seat side frame top & Back Rest. Seat, Back Rest & table top are supported by 6 numbers of stiffeners with MS Tube of 25.4 mm x 25.4mm 1.2 mm thickness square Pipe section (each of length 1549.20 mm) MIG welded to side frames at relevant locations and Foot rest supported stiffeners (table & seat) of 2 Nos with MS tube of 50mmx 25.4mmx1.20mm thickness square pipe section (each of length 1549.2mm) MIG welded to side frames at relevant locations. Square pipe of size 20.0 mm x 20.0 mm x 1.2 mm thickness & 40mm x20mmx 1.2mm thickness and 100.0 mm long shall be welded to the frame to hold the horizontal supports. The Seat & back rest shall have two vertical partitions with equal space. This partition shall be made up of square MS Pipe having size 25.40 mm x 25.40 mm x 1.2 mm thickness.Raw materials of MS tubes shall be from ESSAR / TATA / SAIL / JINDAL. 4.MS Rectangular Pipe sections of dimensions 50.0 mm x 25.40 mm x 1.2 mm thickness shall be closed with PPCP (Poly Propylene Copolymer) cap at both the ends. Pipe diameter 25.4 mm x 1.2 mm thickness shall be closed with PPCP cap at back side and under the seat. 5.Upper modesty panel and shelf shall be made of 0.8 mm thick CRCA sheet. The dimensions for upper modesty panel shall be H 175.0 mm x W 1549.20 mm x D 23.0 mm. The dimensions of shelf shall be W 1549.20 mm X D 300.0 mm X H 23.0 mm. The shelf shall have two vertical partitions with equal space. This partition shall be made up of square MS Pipe having size 25.40 mm x 25.40 mm x 1.2 mm thickness. Stiffeners of MS pipe having sizes as 20.0 mm x 20.0 mm x 1.2 mm thickness shall be provided along the length of upper shown in drawings). And shelf front fascia of upper modesty panel of desk shall have embossed design. The corners of shelf (projecting towards the seating bench) shall be rounded through corner-forming technology (without welding) to avoid injury in case of accidental impact. The thickness of sheet of shelf shall be 0.80mm. 6 Additional Lower modesty panels having size W 1549.20 mm x H 175.0 mm x D 23.0 mm shall be made up of 0.8 mm thick CRCA sheet with designer square perforations. Stiffeners of MS pipe having size 20.0 mm x 20.0 mm x 1.2 mm thickness shall be provided along the length at the bottom side of lower modesty panels and one vertical partition Stiffener of MS pipe having size 20.0 mm x 20.0 mm x 1.2mm thick in modesty panel. (As shown in drawings) 7. Seat and back rest shall be made of 18mm thick plywood of MR Grade OSL (one side shall be laminated, and other side shall have balancer finish) except back rest. Back rest shall have both sides colour lamination Technical details of seat and back rest are mentioned below: 7.1 Seating bench dimensions shall be W 1600.0 mm X D 300.0 mm: Front side shall be rounded with post forming. Remaining three edges shall be sealed with 2mm thick PVC edge banding tape. 7.2 Back rest dimensions shall be W 1600.0 mm x D 250.0 mm: Upper side shall be rounded with post forming. Remaining three edges shall be sealed with 2mm thick PVC edge banding tape. 7.3 Seat and back rest shall be fitted to the frame with MAZAK self-Tapping inserts (Make: ebco/HETTICH) of size M6 x 13mm. 7.4Leg space between top and seat shall be 150mm. 7.5 Bag/bottle hooks shall be made of CRCA sheet. The overall size of hook shall be 135 mmx25.4mmx3mm, (80mm+23mm+32mm) It shall be welded on inner facia of both the vertical press-fitted steel sections. 8.Self-bottom: - Two vertical support stiffeners of 2 numbers with MS tube of size 25.4 mm x 25.4 mm x 1.2 mm thick (as shown in drawing). 9.Seat-bottom: - Two vertical support stiffeners of 2 numbers with MS tube of size 25.4 mm x 25.4 mm x 1.2 mm thick (as shown in drawing). 10.The MIG / Spot welding shall be done as per technical requirement. 11.All metal components shall be powder coated in satin finish with pretreatment process. Powder coating shall be tested and certified on following parameters from NABL Accredited/ Government Laboratory, Valid certificates / test reports to be submitted along with the bid. 11.1Adhesion test: EN ISO 2409 (2 mm). 11.2 Impact resistance test: ASTM D 2794 (5/9’ ball) on applying 180 kg of impact load. 11.31000 hrs. humidity test as per ISO 6270. 11.4Salt spray (FOG) test: 1000 hours as per ASTM B 117. 11.5Cross Hatch Adhesion test as per ASTM: D3359. 11.6Conical Mandrel Test as per ASTM: D522. 11.7Scratch Test as per IS:101-1964 by applying 2 kg load. Laminate Sheets Makes & Color codes: Sl. No Laminate colour Make Shade/ Colour Code Make Shade/ Colour code Make Shade/ Colour code 1 Parrot Green Merino 21143 Green lam 251 SF ASIS 172 2 Ink Blue Merino 21032 Green lam 304 SF ASIS 1027 3 Bubble Gum (pink) Merino 21114 Green lam 173 SF ASIS 1111 4 Saffron (orange) Merino 21024 Green lam 217 SF ASIS 1150 5 Cardinal Red Merino 21065 Green lam 203 SF ASIS 1114 STRUCTURE POWDER COATING COLOUR–CODE-Ral-9010 (Make: AKZONobel/Nerolac/ Asian/ JOTUN) Supply & delivery of finished item including cost and conveyance of all materials, loading, unloading, stacking at Govt. Govt. Polytechnic site and fixing, inclusive of GST and all other Taxes etc., complete as applicable from time to time, and all other incidental charges etc., complete for finished item of work to the Government Govt. Polytechnic in the state of Andhra Pradesh. The item shall carry a warranty period of 5 (Five) years from the date of supply. Excluding GST