Andhra Pradesh Education And Welfare Infrastructure Development Corporation Tender

Plastering 12mm thick in CM (1:5) with single coat dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for finished item of work in First Floor. (APSS 901,903 & 904)

Roofing:- Roofing will be provided with 0.5mm thick Galvinized / Prepainted GI Profile Sheets fixed to the purlins with 14mm size self drilling screws with neoprene washers, side laps or stiched with self taping / drilling scrwos, end laps are to seeled with 25x3mm botyl tape. The sheets are provided with anti campillary grove Including cost and conveyance of all materials and all labour charges etc.., complete for finished item of work.

supply and Fixing MS Purlins 50 mm dia medium grade including Labour Charges for fixing complete including cost and conveyance of all materials to site, sales and other taxes all labour charges etc., complete for finished item of work

Filling with Stone Cursher Dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Flooring with Nano Polished / Stain free Soluble Salt Porcelain Polished Vetrified Tile of size 600x 600mm and thickness between 8 to 10mm thick 1st. quality of any shade as approved by Engineer -in- charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)

Providing Skirting with Nano Polished Soluble salt procelain vitrified tiles screen printed and polished of size 600x600mm and thickness between 8-10mm 1st. quality of any brand as approved by Engineer -in- charge set over a base coat of CM (1:5), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)

Dadooing to walls with white glazed full body ceramic wall tile of size 200x300mm / 245x325mm and 6mm thick 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707) in All Floors

Providing supply and application of chemical treatment flexible acrylic polymer cementicias water proofing sealant treatment to Roof Slab, after thoroughly scraping and brushing the surface to remove all loose powdered materials of the Roof Slab, before primary coat you have applied filling cracks with required chemicals as directed by the Department, after that applied primary coat of brush bond acrylic latex water proofing adhesive cum bonding agent of hydroment 476 create HS / Bosco create chemical or equivalent with 1:4 ratio i.e.., 1 lit. Hydroment 476 create HS / Bosco create chemical and 4 Lt. Water in pigment to apply brush bond to Roof Slab after completion of the primary coat and dry the surface to apply the second coat of brush bond of flexible acrylic polymer cementicias (Bostik or other equivalent) of two components i.e.., powder and chemical liquid in pigment to apply the surface of the roof slab. After two hours later to apply the brush bond of acrylic latex chemical with cement in ratio 1:2 i.e.., 1 lit. acrylic latex in 2 Kgs of cement with pigment to apply the brush bond to roof slab including cost and conveyance of all materials and hire charges of scraping, brushing, cutting, browing machine and all labour charges for scraping, brushing, browing, applying charges etc.., complete as directed by the Department for finished item of work.

Supply and Fixing of Door with Double leaf shutter of Size 1.22x2.13 mtrs with Medium Teak wood Frame of sections size 75mmx100mm with double shutters of 35mm thick solid bond wood block board type with commercial ply on both faces including cost and conveyance of all materials and fixtures such as 6 Nos. of 300mm long MS Hold fasts, 6 Nos.of 125mm long MS butt hinges, 1 No.of 250mm long Aluminium tower bolt, 2 Nos.of 150mm long Aluminium handles & 2 Nos.of Aluminium Door Stoppers including all labour charges for wrought and put- up of Door frame anad shutter and fixing in position all labour charges etc.., complete for finished item of work

Providing and fixing of Openable Windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick galvanized as per IS 277 with Zinc if 120 GSM), primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and section for outer frame of 48x50 mm, centre mullion of 48x50mm, section for shutter of 48x25 mm and the fixed glass beading section should be 12x12mm and the outer frame and mullions to have rebate for glazed shutter with a 20mm provision for guard bars / grills and the sections cut to length metre joined with corner bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos, of stainless steel heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick plain float glass with rubber gaskets including fixing the frames in concrete / masonry wall by means of self expanding screws, including 10mm Square guard bars with 6" (152.4mm) pitch etc.., complete for finished item of work. Centre fixed both side openable shutter window 5'0"x4'0" (1524mm x 1219.2mm). Outer frame section size of 48x50mm. Shutter frame section size of 48x25mm. Mullion section size of 48x50mm. Fixed beading section size of 12x12mm including cost and conveyance of all materials and all labour charges etc.., complete for finished item of work.

Supply, Manufacturing and Fixing of Aluminium anodized fly proof mesh door single shutter to existing door frame using alround and middle horizontal sectin frame of size 44.70x18.50 x1.20mm thick and fixed to frame with required 0.20mm thick (304 guage) SS PC black mesh and binding with required EPDM mesh Gasket (beading) including cost and conveyance of all materials and fixtures such as 4Nos., of special grade PC hinges, 2Nos., of 150mm long aluminium tower bolts, 2Nos., of 100mm long aluminium handles and 2Nos., of Magnetic catches with required screws and specials like joint clips including cost and conveyance of all materials and all labour charges for fixing in position as directed by the departmental officers etc., complete for finished item of work.

Supply, Manufacturing and Fixing of Aluminium anodized fly proof mesh window shutter to existing window frame using alround and middle horizontal section frame of size 20.90x9.45 x0.86mm thick and fixed to frame with required 0.20mm thick (304 guage) SS PC black mesh and binding with required EPDM mesh Gasket (beading) including cost and conveyance of all materials and fixtures such as 2Nos., of special grade PC hinges, 1No. of 75mm long aluminium tower bolt, 1No., of 100mm long aluminium handle and 1No., of Magnetic catche with required screws and specials like joint clips including cost and conveyance of all materials and all labour charges for fixing in position as directed by the departmental officers etc., complete for finished item of work.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.

Providing and fixing of 28-30mm thick solid wood polymer Composite (WPC) single extruded door shutter with 3mm top and bottom rigid layer with an over all density of 750kg / Cum. It will be fixed to the frame using 3 Nos.of 100mm long MS butt hinges, 1 No.of 150mm long MS tower bolts, 1 No.of 200 mm long MS aldrop and 2 Nos.of 125 mm long MS handle for fixing the door with frame including cost and conveyance of all materials and all labour charges etc.., complete for finished item of work.

Supply and fixing of 28.60mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Supply and fixing of 22.20 mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Supply and fixing of Orssia pan of size 580x440mm white glazed WC 1st quality ISI make parry, Neycer & Hinduwere make conformeding IS 2556-part 3-1981 with P and S trap with brick masonry seat including cost and conveyance of all materials and all labour charges etc.., complete for fhinished item of work

Supply and fixing of European water closet of 1st qulaity comforming to IS 2556-part -2- 1973 of hindu stan/ neyer or darry ware make whit glazed with 'S' traps lying and fixing best indian make plastic buffers as per IS 2548 : 1996 and 10 Ltrs. capacity single flush PVC low level cisten parry ware or equivalent with internal components and short bend and fixed using required size using required size of nails and screws, 12mm PVC connections with brass union nuts including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work.

Cost and supply and fixing of 10 Lit capacity single flush white PVC Lowlevel Flushing system ware/ Parry/ Necyer with internal componement 1st quality ISI mark including cost and conveyance of all materials and all labour charge etc., complete work for finished item of work

Supply and fixing NP Bib Taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyacne of all materials and all labour charges etc., complete for finished item of work.for 300 grams

Supply and fixing of 110mm PVC / SWR pipe 4kgs/cm2 including cost and conveyance of all materials and all labour charges etc., complete work for finished item of wrok

Supply and fixing of 25 mm dia Gunmetal Gate (GM peet) valve as per IS - 77 class -I Indian make heavy type including cost and conveyance of all materials and all labour charges etc., complete

Providing & placing of terrance ( at all floor) polytech water storate tank with double layer approved brand & manufacture with cover and suitable locking arrangements and making necessary holes for inlet andoutlet and over flow pipe wigth out fittings and base supports for tank including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work

Construction of Inspection chamber 457.2 mm X 457.2 mm (1'6" X 1'-6") brick masonry CM (1:6) prop. Msonry inspection chamber upto 914.4 mm (3'-0") and fitted with light weight 457.2 mm X457.2 mm CI frame and cover 20 kgs. Including cost and conveyance of all materials and all labour charges etc., complete

Supplying and erecting apporved make Texmo MONO Block centrifugal water pump with impeller, priming funnel cork, companion materlick flanzes, with bolts and nuts and mounted and common shaft of high efficeient squireel cage induction motor totally enclosed and fan colled type suitable to aperate on 230V, single phase, 50HZ 1420RPM A.C Supply of 1.00 HP with minimum/Maximum discahrges/Liters per second for minimum/ Maximum head/ Mts. and suction/ delivery pipe of sizes/ MM with nuts duly grouted in existing C.C foundation and bolts, spring washers of requisite size mono block and pump (IS-9079)" including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work

Wiring with 2 runs of 22/0.3 mm (1.50sq.mm) fire Retardant (FR) PVC insulated fexible copper cable (ISI Make) and 1 run of 1.50sqmm of 22/0.3mm flexible copper cable for run of earth in existing pipe with 6 A one way one modular switch, modular ceiling rose, and 8 modular covering plate to switch control box including all labour charges etc., complete for modular light, bell, fan and exhaust fan points, in NON -Residential Building .

Supply and run of 2 of 2.5 sq.mm ( 36/0.30 ) PVC insulated flexible copper cable in existing PVC conduit pipe for circuits including labour charges (phase neutral) etc., complete as required for switch board circuit mains.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of =100 lumens/watt , PF0.9, Surge protection: 2KV, THD15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI70, etc., complete with earth connection and not less than two years warranty.

Supply of 1200 mm (48" ) sweep 230V AC 50Hz High Speed ceiling fan with thee blades and doub le ball bearing croption make with all standard accessories etc., including cost and conveyance of all materials andall lablur charges etc., complete

Supply of Electronic step type modular regulator for ceiling fans 1200mm sweep complete erected on existing board including and giving connections complete including all lablur charges etc., complete for finished item of work.

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc.., complete

Supply, transportation and fixing of 60W LED Street Light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, supply input voltage 120-270V AC, P.F 0.90, high power LED's having system efficacy110 IM/W and junction temprature70 C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge Protection 4KV, external Surge protection 10KV with optics distribution, THD10% at 110 Volts AC, driver efficiency 90%, w, CCT:3000K - 5700K, minimum CRI70, etc.., including cosst and coneveyance of all materials and all labour charges etc.., complete for finished item of work.