Andhra Pradesh Education And Welfare Infrastructure Development Corporation Tender

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations (APSS No. 402)

Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Footings (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Pedastals (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Columns (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Plinthbeam (APSS No. 402 & 403)

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Random Rubble stone masonry, in CM (1:6) prop: (Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement (APSS No. 601 & 615)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Beams (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Roof Slab 100 mm thick (APSS No. 402 & 403)

FLY Brick Masonry with CM (1:6) prop: using fly ash bricks of size 290x225x140 from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, curing, etc., complete for finished item of work for basement. (APSS No. 501 & 504).

Brick Masonry in superstructure with CM (1:8) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504)

Ornamental plastering to ceiling 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, finishing, scaffolding, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete for finished item of work. (APSS 901, 903 & 904).

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer -in- charge, finishing, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of different diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126)

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size 45x75 MM . The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM.

Providing and fixing of 28-30mm thick solid wood polymer Composite (WPC) single extruded door shutter with 3mm top and bottom rigid layer with an over all density of 750kg / Cum. It will be fixed to the frame using 3 inch / 4 inch hinges. Aluminium of 4 hinges will be required for fixing the door with frame including cost and conveyance of all materials and all labour charges etc.., complete for finished item of work.

Flooring with Non Skid Full body Ceramic Floor Tiles of 300x300mmand 7 to 8 mm thick 1st. quality of any shade as approved by Engineer -in- charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707) inculding CC Bed

Dadooing to walls with white glazed full body ceramic wall tile of size 200x300mm / 245x325mm and 6mm thick 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work (APSS No.701 & 707) in All Floors

Whiting to walls and ceiling in two coats with Birla / Surya cem or equavalent quality to give an even shade after thoroughly brushing the surface to remove all loose powdered materials including cost and conveyance of all materials and water to site, sales & other taxes, all operational, incidental and labour charges such as cleaning the surface, painting, curing etc., complete for finished item of work for internal walls. (APSS No.901 & 908)

Painting to walls with two coats of Acrylic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912)

Supply and fixing of Orssia pan of size 580x440mm white glazed WC 1st quality ISI make parry, Neycer & Hinduwere make conformeding IS 2556-part 3-1981 with P and S trap with brick masonry seat including cost and conveyance of all materials and all labour charges etc.., complete for fhinished item of work

Supply and fixing of 110mm PVC / SWR pipe 4kgs/cm2 including cost and conveyance of all materials and all labour charges etc., complete work for finished item of wrok

Providing & placing of terrance ( at all floor) polytech water storate tank with double layer approved brand & manufacture with cover and suitable locking arrangements and making necessary holes for inlet andoutlet and over flow pipe wigth out fittings and base supports for tank including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work

Supply & fixing indian make Flat Back Wash Hand Basin (HSW/ Parryware/Neycer) 1st quality conforming to IS: 2556-Part-4:1972 with waste fittings like rubber plug, chain, 32mm nominal sixe C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominnal bore Chromiium Plated Pillar Tap of 1st quality Indian Make 300 grams Seiko/Esso or equivalent complete with standard CI brackets including wooden block

Supplying and erecting apporved make 0.50 HP Texmo MONO Block centrifugal water pump with impeller, priming funnel cork, companion materlick flanzes, with bolts and nuts and mounted n a common shaft of high efficeient squireel cage induction motor totally enclosed and fan colled type suitable to aperate on 230V, single phase, 50HZ 1420RPM A.C Supply of 0.50 HP with minimum/Maximum discahrges/Liters per second for minimum/ Maximum head/ Mts. and suction/ delivery pipe of sizes/ MM with nuts duly grouted in existing C.C foundation and bolts, spring washers of requisite size mono block and pump (IS-9079)" including cost and conveyance of all materials and all labour charges etc., complete work for finished item of work

Supply and fixing NP Bib Taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyacne of all materials and all labour charges etc., complete for finished item of work.for 300 grams

Drinking Water

Supply and fixing of 15.90 mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Supply and fixing of 28.60mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Supply and fixing of 22.20mm dia Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fitings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"ton 2" Ashirvad Flowgurand SDR 13.5 pipes are made from idebtial CPVC compounds having the same physical Properties Cold Water including cost and conveyance of all materials and all labour charges etc., complete for finished item of work

Supply and fixing NP Bib Taps of size 12.70mm dia of Indian make Seiko or equivalent including cost and conveyacne of all materials and all labour charges etc., complete for finished item of work for 300 grams

Drinking water system for schools with TDS reduction required to 150-400 ppm from source water having TDS 400 to 3000 ppm : Type- II Supplying and fixing of Drinking water system with the set Design, Drawing and Specifications, Cost includes loading, Transportation, supply, unloading charges etc., Erection, Commissioning, Testing including TDS range of the Purified water at the school premises, and all incidental charges, including GST etc., all other taxes and charges for complete finished item of work, with a warranty period of 05(five) years and further extendable AMC for a period of 05(five) years on mutually agreed terms and conditions. Tank overall dimensions:645.8mmx531.4mmx 1576.4mm (with leg) A] Top water tanks: Raw water tank (40 liters capacity) :Clear size : 224mmx475mmx420mm Outer size : 226.4 mm x 477.4 mm x 422.4 mm Openable top cover with strong Hinge: 228.4mmx479.4mmx50mm Float : 1 No.(Brass/ SS steel) Inlet : SS nipple of 25 mm dia.outlet :SS nipple of 12 mm dia.Drain pipe : SS nipple of 12 mm dia.Tank made up of 1.20mm thick Stainless-steel sheet 304 grade, openable Top Lid with hinge made up of 1.20mm thick SS sheet 304 grade, Make viz. : Jindal / TATA / Vizag Steel / Salem SAIL.(2) Pure water tank (60 liters capacity):Clear size: 336mmx475mmx420mm Outer size: 338.4 mm x 477.4 mm x 422.4 mm Openable Top cover with Hinge : 340.4mmx479.4mmx50mm Float : 1 No.(Brass/ SS steel) Inlet: SS nipple of 25 mm dia. outlet : SS nipple of 12 mm dia. Drain pipe :SS nipple of 12 mm dia. Tank made up of 1.20mm thick Stainless-steel sheet 304 grade Openable Top / Upper Lid with strong Hinge and holder made up of 1.20mm thick SS sheet 304 grade (3) Tank Frame: The overall Tank frame shall be made with stainless steel tube of size 25 mm x 25 mm x 3 mm thickness with all verticals and horizontals and also stiffeners at bottom of raw water tank & pure water tank including bottom supporting sheet of 3 mm thick. Openable Top cover of 01mm thickness with strong hinge :Top dimension size of tank SS 304 grade (645.8 mm x 531.4mmx50mm) Locking system for Lid: With SS hinges and pad lock for 01mm thick, SS 304 grade top cover of the above water tank The entire body except back door made up of 01 mm thick SS 304 grade Embossing letters on Tank : Nadu -Nedu2020 Tube made up of Stainless steel 304 grade.

Major & Minor Repairs

Flooring with Stain free Soluble Salt Porcelain Polished Vetrified Tile of size 600x 600mm and thickness between 8 to 10mm thick 1st. quality of any shade as approved by Engineer -in- charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)

Providing Skirting with Soluble salt procelain vitrified tiles screen printed and polished of size 600x600mm and thickness between 8-10mm 1st. quality of any brand as approved by Engineer -in- charge set over a base coat of CM (1:5), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work.(APSS No.701 & 707)

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) prop. 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work (APSS No. 901 & 903).

Kitchen Shed

Earth work excavation and depositing on bank with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils (SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc., complete for finished item of work including seignerage charges excluding dewatering charges etc., complete for Foundation of Building.(APSS No. 308)

Plain Cement Concrete corresponding to M7.5 grade as per IS 456 equivalent to (1:4:8) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations (APSS No. 402)

Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work for Foundations and Flooring Bed (APSS No. 402)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Footings (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Pedastals (APSS No. 402 & 403)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering, machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Columns (APSS No. 402 & 403)

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Vibrated Reinforced Cement Concrete M 25 Design Mix (by weigh batching) using 20mm size (SS5) hard blasted granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 380 kgs.of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc., shuttering , machine mixing, laying concrete, vibrating,lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work for Plinthbeam (APSS No. 402 & 403)

FLY Brick Masonry with CM (1:6) prop: using fly ash bricks of size 290x225x140 from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, curing, etc., complete for finished item of work for basement. (APSS No. 501 & 504).

FLY Brick Masonry with CM (1:8) prop: using fly ash bricks of size 290x200x140 from approved source having minimum crushing strength of 100 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, curing, etc., complete for finished item of work for superstructure (APSS No. 501 & 504).

Plastering 12mm thick in single coat CM (1:5) with dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete for finished item of work. (APSS 901,903 & 904)

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of different diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete for finished item of work (APSS No.126)

supply and Fixing MS Purlins 50 mm dia mediam grade including Labour Charges for fixing complete including cost and conveyance of all materials to site, sales and other taxes all labour charges etc., complete for finished item of work

Roofing:- Roofing will be provided with 0.5mm thickGalvinized / Prepainted GI Profile Sheets fixed to the purlins with 14mm size self drilling screws with neoprene washers, side laps or stiched with self taping / drilling scrwos, end laps are to seeled with 25x3mm botyl tape. The sheets are provided with anti campillary grove Including cost and conveyance of all materials and all labour charges etc.., complete for finished item of work.

Electrification

Supply and fixing of 25mm dia using 2.20mm thick PVC pipe (ISI) Mark concealed in roof slab all required accessories including masonary work and labour charges etc., complete including cost and conveyance of all materials and all labour charges etc.., complete for finished item of work Make Sudhakar/ Marqury plast/ Avon plast

Supply and fixing of 25mm dia using 1.80mm thick PVC pipe (ISI) Mark concealed wall with all required accessories including masonary work for light fan and separate plug point with well seasoned wooden deep box including all labour charges etc., complete including cost and conveyance of all materials and all labour charges

Supply and run of 1of 22/0.30mm (1.5 sqmm) FRLS PVC insulated flexible copper cable in existing PVC/MS conduit pipe for circuits including labour charges (phase neutral and earth) etc., complete as required for switch board circuit mains.

Supply and run of 2 of 2.5 sq.mm ( 36/0.30 ) PVC insulated flexible copper cable and one run of 1.0 sq.mm (14/ 0.30 ) flexible copper wire for earthing in existing MS conduit pipe for circuits including labour charges (phase neutral and earth) etc., complete as required for switch board circuit mains.

Wiring with 2 runs of 22/0.3 mm (1.50sq.mm) fire Retardant (FR) PVC insulated fexible copper cable (ISI Make) and 1 run of 1.50sqmm of 22/0.3mm flexible copper cable for run of earth in existing pipe with 6 A one way one modular switch, modular ceiling rose, and 8 modular covering plate to switch control box including all labour charges etc., complete for modular light, bell, fan and exhaust fan points, in NON -Residential Building .

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing of 16A / 6A Modular type power outlet 6 Nos with front cover plates including 16A socket 1 No., 16A switch 1No., 6A sockets 2 Nos., 6A switches 2 Nos and 8 Module Hot Dip Galvanized Modular Metal Box size covered with 6 Modular Cover Frame including earth connections and all labour charges etc., complete for finished item of work.

Supply of 1200 mm (48" ) sweep 230V AC 50Hz High Speed ceiling fan with three blades and double ball bearings croption make with all standard accessories etc., including cost and conveyance of all materials andall lablur charges etc., complete

Supply, Fixing and transportation of 20W/24W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220-260 Volts with PF0.9, Surge protection:2KV,THD15%, with inbuilt driver and forsted cover CCT: 3000K - 5700K, minimum CRI70, etc.., complete. with Fixing of 18W/20W LED luminaire on wall / Ceiling with TW round blocks with all accessories including giving connections and all labour charges etc.., complete. LUMINAIRE MAKE: Philips /GE-Venture/ Crompton / Wipro / Bajaj / Havells / Halonix / Jaquar / HPL/GM/Green LItes/Gold Medal/Evereday b) LED MAKE: Philips Lumileds / CREE / NICHIA / OSRAM SAMSUNG / Everlight.

Supply and fixing of Batten holder/slenting holder in lieu of ceiling rose of light point and fixing of 40 W Bulb complete with all connection and labour charges etc., complete .for finished item of work

Supply and fixing of 20 W LED Street Light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, supply input voltage 120-270V AC, P.F 0.90, high power LED's having efficacy120 lumines/watt, System efficacy95 lm/W and junction temprature70 C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge Protection 4KV, external Surge protection 5KV with optics distribution TYpe II medium, THD10% at 110 Volts AC, driver efficiency 90%, w, CCT:3000K - 5700K, minimum CRI70, etc.., complete a) LUMINAIRE Make: Kripa lights / SEMTRONICS/VRILISO/Stanjo/ Prolite. ELEC-3.9.31

Green Chalk Board

Supply and fixing of ceramic steel Green Chalk Board of size 2400mmx 1200mm with vitreous enamel steel sheet made of 0.3mm to 0.40mm thick steel sheet with Ceramic steel engraving on surface (having vitreous enameled coating both sides), 0.095mm thick top surface coating and back surface coating thickness of 0.03mm supported with 9mm thick MDF Board make : (Greenlam / Merino / Action Tesa) back support and backing with 0.25mm thick galvanized steel sheet make : (TATA / JSW / Sail / Vizag Steel) fixed with anodized aluminum frame 20mm wide and 1.2mm thick and board shall be given additional support at four sides bottom with Alluminium J-Clamps (8 Nos.) including cost & conveyance of all materials and all labour charges like loading, unloading, including GST and all taxes etc., as applicable from time to time and fixing of Green Board etc., complete for finished item of work. The item shall carry a Warranty period of 7 (Seven) years from the date of supply

English Lab

Supply & fixing of Smart TV and 1 TB Hard Disk : Processor: QuaCore Best Processor in the segment, Display: LCD panel with LED Backlit Technology :Vertical alignment (VA) or in-plane switching (IPS), Display Size :Vertical alignment (VA) or in-plane switching (IPS), Resolution: resolution of at least 3840x2160 pixels, Brightness:=300 Nits, Response Time:= 9ms, Aspect Ratio:16:09:00,Smart Features: Direct internet to panel Web Browser, pre-loaded You tube and other apps. WIFI, Screen Share, Digital Signage S/W for educational content. Key Board & Mouse (HP, iball, Logitech, Microsoft or OEMs own manufactured product) with one-year warranty from manufacturer, Camera & Microphone Wireless Connectivity:(Compatibility), Bluetooth. Signal Interface: Input Ports: HDMI two (02) or more, RJ45 Port-1,total two(02) or more, Input: USB ports out of which at least one in built USB-port, RS-232. Signal Inter face output: Output Ports: Optical/Digital Output for connecting 3.5mm jack., Content Management Software: Minimum total storage should be32GB, out of which minimum 8GB should be in built storage and the rest may be Integrated Storage subject to safety norms, RAM=2GB or above. Android or other OS to run education content, videos compatible with all android devices Audio-Video: Must Compatible with all Audio, Video, Data Formats (WPS) or equivalent, Work ID : 202223022870 Name of the Work : English Labs U-DISE Code : 28142700601 School Name : MPPS (NO.1) UPPALAPADU Estimate Amount (in Rs.) : 51,000/-1 of 4Media player integration, wall bracket: Installation & operationalization at site as per requirement, Warranty:5 years warranty Control features: WOL, SNMP or equivalent to check health of Display TV from central location, OEM should have turnover more than 1000 Crores in any one financial year, of last 5 Financial years (2015, 2016, 2017,2018,2019). Pre-Tender qualifications :OEM should have their own manufacturing facility and Registration in India, OEM should have at least one (01) Direct /Authorized service Centre, established in the past (05) five years in each district in Andhra Pradesh. (Agreement Copy required). No of units sold in any one year: Sold at least 10000 units to multinationals, reputed private or public institutions, Government or Govt. Agencies etc. together, in any one by the company: financial year, in the last five (05) years. Safety :BIS or Confirming to BIS Specification Builtin, Speakers: =10W+10W, Separate/detachable Sound Bar, only: =20 W (5W + 5 W + 5W + 5W) or any other pattern, Refresh rate:=60 Hz ,Supply of 1TB External Hard Disc contains, Memory storage capacity - 1 TB, Flash Memory Installed Size - 1 TB, Digital Storage Capacity - 1000 GB, Hard Drive Size - 1 TB, Hard Drive Interface - USB 2.0/3.0, Hard Platform - PC, Mac, Smart Tv Hardware Interface - USB 2.0, Compatible devices ʹLaptop, Desktop, TVs Warranty - 3 Years, Make: Seagate/WD/Toshiba/Transcend/Lenovo (Or) Equivalent

Paintings

Painting to walls with two coats of Acrylic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 912)

Painting to Wood work with two coats of ready mixed synthetic enamel paint first quality all shades over a base coat of wood primer with Luppam Finishing in all to give an even shade after thouroughky brushing the surface to remove all reamains of loose powdered materials including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc., complete for finished item of work. (APSS No. 1201, 1207 & 1212).